Abstract
Water plays a vital role in deteriorating stone heritage, especially those carved into vertical rock slopes. Southeast China is home to numerous limestone rock-hewn heritages, many of which showcase diverse deterioration patterns on their facades. Nevertheless, due to the large scale of this heritage and the limitations imposed by the principle of minimal intervention in practices, there is still a lack of practical strategies for understanding moisture distribution. Therefore, this study aims to analyse the moisture distribution of limestone rock-hewn statues via in situ detection employing a portable hygrometer and laboratory calibration based on the gravimetric method and regression analysis. The in situ determination was conducted in the Ciyunling statues niche 1 (World Heritage Site), which was hewn in the Wuyue states (942 CE). Thirty-six measuring areas were evenly planned on the niche's façade, with 20 moisture readings obtained from each measuring area. Additionally, the surface hardness of the typical area of statues was examined using a non-invasive Leeb hardness tester and Kruskal–Wallis H test to assess the impact of moisture on deterioration. The findings reveal that the statues' moisture content is higher than the background wall between the statues, signalling a greater potential for deterioration on the surface of the limestone statue. The primary source of moisture appears to be gaseous water in the atmosphere, which accumulates in the micropores through capillary condensation. Furthermore, the statistically significant differences in surface hardness between the chest/shoulder of statues and the root of the façade highlight the softening effect of moisture on the foundation of the limestone statues. Hence, the methodology utilised in this study serves as a viable approach for examining moisture levels and the extent of deterioration in rock-hewn heritage structures.
Highlights
-
Systematic in situ measurement of moisture distribution on the facades of limestone rock-hewn heritage.
-
A linear regression equation between limestone’s electrical resistance-based moisture content (ωc) and the gravimetric moisture content (ωo) was obtained.
-
The surface of the limestone statues contains more moisture signalling a greater potential for water-induced weathering.
-
the surface hardness of the limestone facade significantly diminishes as the height decreases according to Kruskal–Wallis H test.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
Limestone rock-hewn statues are significant cultural heritages in Southeast China and valuable materials for studying the secularisation of Buddhism (Su 1989). Southeast China has a humid subtropical climate with wet and scorching summers, as well as damp and cold winters. It experiences abundant precipitation, with an average annual rainfall of 800–1600 mm. The region is characterised by hilly landscapes and developed river systems, with a drainage density of 0.3–0.4 km/km2 (Zheng 2008). According to the 2021 general survey results on rock-hewn temples and statues in Zhejiang Province, China, there are 87 rock-hewn sites in this province. Most of these sites are carved from limestone cliffs (Li 2011). Preliminary survey results also indicate that many of the limestone rock-hewn sites in this area have different deterioration patterns, such as powdering, spalling, and peeling (Wei et al. 2018).
Water is a crucial weathering driver of stone heritages, such as stone buildings, grottos, and rock-hewn statues (Sass and Viles 2022). Due to their close association with geological formations and direct exposure to nature, rock-hewn statues have access to abundant water sources, including rivers, floods, rainfall, groundwater, capillary water, and condensate water (Xiao et al. 2010). This water ingress to stone heritages through the pores, voids, cracks and fissures, which plays a vital role in various weathering processes. For instance, water is essential for the process of salt weathering as it not only dissolves soluble salt ions as a solvent, but also aids in the migration and crystallisation of these ions within rock pores (Lopez Acevedo et al. 1997; Goudie and Viles 1997; Scrivano and Gaggero 2020). The critical level of saturation influences the degree of frost damage in rocks (Al-Omari et al. 2015). Additionally, repeated wetting and drying cycles under neutral conditions can also decrease the fracture toughness of rocks (Dehestani et al. 2020). In real-world scenarios, the aforementioned water-related weathering processes often interact with each other, leading to a more intricate process of rock weathering. Therefore, comprehending the distribution of moisture and its dynamic characteristics in exposed immovable large-scale rock-hewn heritages is vital for monitoring their current condition and determining the main factors causing damage (Egartner et al. 2020).
However, preserving the historical condition, maintaining integrity, and minimising intervention are fundamental principles in the scientific conservation of cultural heritages (ICOMOS China 2015). Methods that involve directly drilling samples on the cultural heritages or embedding probes are generally considered unacceptable, even though they may provide a more straightforward and convenient means of reflecting the moisture distribution on the heritage's facade. Therefore, the in situ determination of moisture content using non-destructive and non-invasive instruments has emerged as an alternative approach. Electrical resistivity is commonly used as a proxy for water content, but the relationship between electrical resistivity and water content can be influenced by salts in the pores (Sass and Viles 2010; Lopez-Gonzalez et al. 2016; Kawaai and Ujike 2018). A microwave moisture system is another beneficial device that analyses the moisture of materials based on their dielectric constant (Jamil et al. 2013). However, water vapour can introduce slight changes in the dielectric properties of air, so sometimes the results can be limited (Orr et al. 2020a, b). In recent years, infrared thermography has gained popularity as a technique for mapping surface moisture. By detecting temperature anomalies on the rock facade, it can indicate areas with higher water content, as these areas tend to display lower temperatures (Moropoulou et al. 2001; Martínez-Garrido et al. 2018; Barbosa et al. 2021; Pappalardo et al. 2022). Furthermore, nuclear magnetic resonance (NMR) technology has been utilised in the study of water distribution in severely damaged wall paintings and rock walls (Di Tullio et al. 2010; Camaiti et al. 2015). But, the widespread adoption of NMR has been hindered due to its high cost and complex operation.
Determining moisture in limestone rock-hewn heritage remains a complex issue that necessitates attention to mitigating weathering risks and preserving these valuable artefacts. Currently, a systematic measurement strategy for determining moisture content in such heritage is lacking. This paper aims to fill this gap by evaluating the spatial distribution of moisture on the rock facade through zonal moisture content testing, while investigating the potential sources of moisture and exploring the relationship between deterioration and moisture.
2 Study Site
The Ciyunling statues, situated east of Yuhuangshan Mountain in Hangzhou City, are an integral part of the Hangzhou West Lake Cultural Landscape, designated as a World Heritage site (see Fig. 1a, b). These statues were hewn during the Wuyue states of the Five Dynasties in 942 CE, and they are regarded as representative works of Buddhist statues from that era. There are four niches in total, containing 13 stone statues (Chang 1995). Niche 1 (See Fig. 1d), located at the site's north end, was chosen for the on-site investigation. This niche consists of three statues: the Bodhisattva Ksitigarbha in the middle, with a height of 198 cm, and two followers on either side, measuring 141 cm and 134 cm in height. And a thick rock platform connects the statues to the ground, with a height of approximately 65 cm.
3 Methods
3.1 Petrological, Physical and Mechanical Properties Measurements
The mineral composition and texture properties of Ciyunling limestone that were sampled from the same bedding layer and facade as the Ciyunling statues were observed by a polarising microscope and determined by X-ray diffraction. Water absorption coefficient by capillary and splitting tensile strength were determined by standard test methods BS EN 1925:1999(1999) and ASTM c1006/c1006m-20a (2020), respectively. Before the two standard tests, the limestone samples were dried at 50℃ until reaching a constant mass.
The porosity and density of the limestone were determined by the Mercury Intrusion porosimeter (AutoPore IV 9510). The average pore diameter, pore volume and specific surface area of the rock samples were determined by Quantachrome AUTOSORB-1-C automatic physisorption analyser (the rock samples were pretreated at 300℃ under vacuum for 15 h with nitrogen used as the adsorbate). Testing was conducted in the State Key Laboratory of Chemical Engineering, Zhejiang University.
3.2 In Situ Moisture and Hardness Measurement
The field test was conducted on April 25, 2023, under cloudy weather conditions and an average temperature of 11 °C. The previous day, April 24, experienced light rain accompanied by a gentle north wind. Throughout the field test, there were no apparent signs of water flow on the statue's surface. The protective shelter surrounding the statue extends about 50 cm beyond its natural outline. Considering the statue's placement in the northeast, facing southwest, it is presumed that little direct rainfall or wind-driven rain impacted the statue's surface.
The portable Testo 606-2 moisture meter was utilised to determine the water content of the statues. The Testo 606-2 is a resistance-type moisture meter that measures materials' electrical resistance (ER) and displays the material moisture directly in percentage by weight via the stored characteristic curves between ER and moisture weight ratio. This moisture meter was selected due to the efficacy of ER technology in reflecting the distribution of surface moisture, specifically offering benefits in furnishing a comprehensive spatial assessment. (Weiss and Sass 2022).
The investigation area encompassed three statues and the background rock walls (See Fig. 2). This area was subdivided into eight equal parallel layers, with different measuring areas assigned to the statues and the background rock walls in each layer. The smaller statues on the left and right were further divided into six separate measuring areas (L1–L6, R1–R6), while the middle statue was divided into eight measuring areas (C1–C8). The left and right background rock walls were divided into eight areas each (BR1–BR8, BL1–BL8), totalling 36 measuring areas. Within each area, 20 moisture content readings were randomly taken, and the average moisture content of each area was calculated. The moisture content distribution was then mapped based on these calculations.
Moreover, the Leeb hardness tester (BH200C) was used to measure the surface hardness of the statues. This type of hardness tester is a non-invasive device based on the rebound theory and is commonly employed to assess the preservation status of built heritage (Viles et al. 2011; Freire-Lista and Fort 2017; Wang et al. 2020). Although the impact force exerted by the small metal ball is minimal, it can leave a small round mark on the rock surface during testing (Desarnaud et al. 2019). To minimise potential damage to the statues' appearance caused by intensive measurement, only six test areas and the rock platform beneath the statues were selected for surface hardness measurement. Ten random measurements were taken in each measuring area, and the average value was determined. Finally, the Kruskal–Wallis H test, a nonparametric test, was performed using IBM SPSS statistical software to ascertain any differences among the selected measuring areas.
3.3 Laboratory Calibration for the Establishment of the Relation Between the In Situ Moisture Data and the Gravimetric Moisture Content
A laboratory calibration test was designed to establish the relationship between moisture content obtained from the resistance-type moisture meter (Testo 606–2) and gravimetric moisture content, i.e. the mass of water per mass of dry stone. A local limestone sample was taken from the same bedding layer as the Ciyunling statues (See Fig. 3). The limestone specimen was placed in a dryer and vacuumed for 2 h. Deionised water was then injected into the vacuumed dryer until the water level was 5 cm above the highest point of the specimen, followed by opening the vacuum valve to restore normal atmospheric pressure. After 24 h, the specimen was removed from the water and placed in a transparent polymethyl methacrylate box with openings on the side and bottom to reduce the interference of air disturbance.
The indoor environment conditions during the laboratory test were maintained at 25 ± 0.5 ℃/60 ± 2%rh. The moisture content of the specimen was measured at regular intervals, starting from saturation to drying. Measurements were taken every 30 min for the first 1.5 h and every 1 h for the next 8 h, totalling 570 min. The gravimetric method was used to determine the actual water content of the specimen while concurrently utilising the Testo 606–2 moisture meter to gauge the moisture content on the outer surface of the specimen that had been initially exposed to the ambient atmosphere during sampling. Each measurement involved ten fixed spots (See Fig. 3a). Regression analysis was performed to establish a relationship between the actual moisture content and the detected surface moisture content. Using the regression formula, the actual moisture content of the Ciyunling statues can be calculated by substituting the in situ detected moisture value.
4 Results and Discussions
4.1 Petrological, Physical and Mechanical Properties of Ciyunling Limestone
The Ciyunling statues were constructed on lower Permian strata, and the lithology therein is characterised mainly by limestone composed of calcite [CaCO3] and high-magnesium calcite [CaMg(CO3)2]. The stone has a greyish white appearance and coarse crystalline structure (see Fig. 4).
The main physical and mechanical properties are presented in Table 1. The pore structure test results reveal that the rocks are relatively dense, with low porosity and nano-scale average pore size, which induces a low water absorption capacity.
4.2 Moisture Content and distribution of the Facade of Ciyuling Statues
The laboratory calibration test established a correlation between the detected moisture content (ωc) of the Ciyuling limestone using the Testo 606-2 moisture meter and the actual moisture content (ωo) obtained by the gravimetric method. The saturated water content of the limestone is 0.56wt.%. As shown in Fig. 5, there is a linear correlation between ωc and ωo (R2 = 0.9123). The linear equation is as follows:
It can be seen that Testo 606-2 moisture meter can provide a solid response for the water content of the Ciyunling limestone, and the linear equation can be used to calculate the actual water content of the statues. Figure 6a depicts the detected moisture content using the Testo 606-2 moisture meter, while Fig. 6b represents the actual moisture content calculated using Eq. (1).
Figure 6a shows that the three statues' moisture content, indicated by the red and white zone, is higher than that of the background rock wall between the statues (blue zone). The wettest area (red zone) is concentrated on the middle statue's waist and below, and on the chest and leg of the two smaller statues on the left and right sides. This indicates that water mainly accumulates in the parts of the statues below 1.6 m. Previous studies have shown that water transport in materials with a predominant micropore structure (< 100 nm) is primarily due to capillary condensation and surface diffusion (Siegesmund and Durrast 2011). Meanwhile, no trace of water flow was observed on the surface of the Ciyuling statues during the field testing. Therefore, it is likely that the moisture on the surface of the statues, dominated by nano-pores, mainly comes from gaseous water in the air that accumulates in the pores through capillary condensation.
Capillary condensation refers to the process of gaseous water condensing into liquid water in materials with a confined micro-structure, such as porous rock. This phenomenon can significantly impact the characteristics of adsorption, lubrication, friction, and corrosion at the solid–liquid interface (Huber 2015). The occurrence of capillary condensation is influenced by ambient humidity and pore size. Studies shown that capillary condensation in nano-scale pores follows the Kelvin equation, and the smaller the pore size, the lower the ambient humidity required for capillary condensation (Yang et al. 2020). Considering the location of the Ciyuling statues in a humid subtropical area with low-lying terrain and a dense river network, these climate and geo-hydrological characteristics would facilitate capillary condensation on the statues.
On the other hand, the statues have a three-dimensional form and a greater surface area than the flat background rock wall. Therefore, the statues theoretically contain more pores and a larger pore volume, allowing them to absorb and retain more moisture. This increased moisture content can lead to the dissolution of atmospheric acidic ions such as \({CO}_{3}^{2-},{SO}_{4}^{2-},{NO}_{X}^{-}\), thus accelerating the weathering process of the statues (Li et al. 2001). Additionally, the acid-insoluble matter content in the limestone of this region is generally low (< 5%), making the shrinkage of rock volume caused by non-uniform weathering more significant (Sun et al. 2002). Thus, water accumulation on the statue's surface indicates a higher likelihood of surface weathering and deterioration than the background rock wall between statues.
4.3 Surface Hardness, Surface Moisture Content and Weathering Degree of the Ciyunling Statues
As shown in Table 2, the surface hardness and moisture vary across the three areas of the statues, namely the facade root, leg and chest/shoulder. Based on the outcomes of the Kruskal–Wallis H test, there are statistically significant differences in surface hardness between the chest/shoulder area and the facade root. Similarly, a significant difference in moisture content was identified between the chest/shoulder area and the facade root. This suggests that, in general, the surface hardness of the limestone diminishes as the height decreases, while, reversely, the moisture content decreases as the height increases. Consequently, it can be presumed that the degree of weathering at the facade root is likely greater than at the higher parts of the statues, such as the chest/shoulder area, as a decline in surface hardness typically signifies a higher degree of weathering (Wilhelm et al. 2016; Wang et al. 2021). This circumstance could not only jeopardise the authenticity of the artefact but also compromise the stability of the overall structural niche.
Furthermore, it should be noted that the distribution of surface hardness values is discrete. This discreteness can be attributed to both the inherent heterogeneity of the rock and the uneven surfaces of the rock statues. The presence of irregularities on the statues’ surfaces poses a challenge for the small metal ball in the surface hardness tester to achieve the desired impact angle of 90 degrees horizontally, resulting in deviations in the results. Accordingly, it is evident that the irregular features of rock-hewn heritages inevitably have an impact on the accuracy of on-site measurements. To account for this, it is necessary to increase the number of samples taken within an acceptable range in conservation practice, in order to better approximate the actual conditions.
5 Conclusion
The moisture content and distribution of Ciyunling statues were ascertained through in situ measurements and laboratory calibration tests. The limestone statues exhibit a higher moisture content than the background rock walls between the statues. Consequently, the statues may display greater vulnerability to the ambient environment and water-induced deterioration. The primary water source for these statues may be the gaseous water in the atmosphere, which accumulates within surface pores via capillary condensation. The sampling strategy of the on-site moisture content plays a crucial role in effectively portraying the overall depiction of the moisture distribution of the statues. Hence, it is advisable to consider this aspect during fieldwork in such historically significant rock-hewn heritage. The methodology applied in this study can be convincingly believed to be available for tackling this issue and contributing to future remedies.
Considering the escalating occurrence of extreme high-temperature events in recent years, future research could focus on examining the dynamic variations in moisture content and the response of rock properties under high heat and high humidity conditions. It will enhance our understanding of the potential effects of climate change on the long-term preservation of limestone rock-hewn heritage.
Data Availability
The datasets analysed during the current study are available from the corresponding author upon reasonable request.
References
Al-Omari A, Beck K, Brunetaud X, Török Á, Al-Mukhtar M (2015) Critical degree of saturation: a control factor of freeze-thaw damage of porous limestones at Castle of Chambord, France. Eng Geol 185:71–80. https://doi.org/10.1016/j.enggeo.2014.11.018
ASTM [American Society for Testing and Materials] (2020) Standard test method for splitting tensile strength of masonry units (C1006/C1006M—20a). Retrieved from https://compass.astm.org/document/?contentCode=ASTM%7CC1006_C1006M-20A%7Cen-US
Barbosa MTG, Rosse VJ, Laurindo NG (2021) Thermography evaluation strategy proposal due moisture damage on building facades. J Building Eng 43:102555. https://doi.org/10.1016/j.jobe.2021.102555
Camaiti M, Bortolotti V, Fantazzini P (2015) Stone porosity, wettability changes and other features detected by MRI and NMR relaxometry: a more than 15-year study. Magn Reson Chem 53(1):34–47. https://doi.org/10.1002/mrc.4163
Chang Q (1995) Rock-hewn statues of ZIxian temple on the Ciyunling, Hangzhou. Cultural Relics 10:70–79+98. (in Chinese)
Dehestani A, Hosseini M, Beydokhti A (2020) Effect of wetting-drying cycles on mode I and mode II fracture toughness of sandstone in natural (pH=7) and acidic (pH=3) environments. Theoret Appl Fract Mech 107:102512. https://doi.org/10.1016/j.tafmec.2020.102512
Desarnaud J, Kiriyama K, Bicer Simsir B, Wilhelm K, Viles H (2019) A laboratory study of Equotip surface hardness measurements on a range of sandstones: What influences the values and what do they mean? Earth Surf Proc Land 44(7):1419–1429. https://doi.org/10.1002/esp.4584
Di Tullio V, Proietti N, Gobbino M, Capitani D, Olmi R, Priori S, Riminesi C, Giani E (2010) Non-destructive mapping of dampness and salts in degraded wall paintings in hypogeous buildings: the case of St. Clement at mass fresco in St. Clement Basilica. Rome Anal Bioanalytical Chem 396:885–1896. https://doi.org/10.1007/s00216-009-3400-x
Egartner I, Sass O, Viles H, Dietzel M (2020) A multi proxy investigation of moisture, salt, and weathering dynamics on a historic urban boundary wall in Oxford. UK Studies in Conservation 65(3):172–188. https://doi.org/10.1080/00393630.2019.1628480
BS En [British Standard Institution] (1999) Natural stone test methods- Determination of water absorption coefficient by capillarity (1925:1999). London: BSI Standards
Freire-Lista DM, Fort R (2017) Exfoliation microcracks in building granite. Implications Anisotropy Eng Geol 220:85–93. https://doi.org/10.1016/j.enggeo.2017.01.027
Goudie A, Viles H (1997) Salt weathering Hazards. Wiley Chichester.
Huber P (2015) Soft matter in hard confinement: phase transition thermodynamics, structure, texture, diffusion and flow in nanoporous media. J Phys 27(10):103102. https://doi.org/10.1088/0953-8984/27/10/103102
ICOMOS CHINA (2015) Principles for the conservation of Heritage Sites in China. Beijing: Cultural Relics Press
Jamil M, Hassan MK, Al-Mattarneh HMA, Zain MFM (2013) Concrete dielectric properties investigation using microwave nondestructive techniques. Mater Struct 46:77–87. https://doi.org/10.1617/s11527-012-9886-2
Kawaai K, Ujike I (2018) Electrical resistance tomography for assessing water movement in cracked cementitious mixtures. MATEC Web Conf 199:11016. https://doi.org/10.1051/matecconf/201819911016
Li DW, Cui ZJ, Liu GN, Feng JL, Cao J (2001) Formation and evolution of karst weathering crust on limestone and its cyclic significance. Carsologica Sinica 03:17–22 ((in Chinese))
Li HS (2011) Character and evaluation method of historical rock deterioration. Doctoral thesis. China University of Geosciences (Beijing). (in Chinese)
López-Acevedo V, Viedma C, Gonzalez V, La Iglesia A (1997) Salt crystallization in porous construction materials .2. Mass transport and crystallization processes. Journal of Crystal Growth 182(1–2):103–110. https://doi.org/10.1016/S0022-0248(97)00341-2
Lopez-Gonzalez L, Otero de Cosca R, Gomez-Heras M, Garcia-Morales S (2016) A 4D GIS methodology to study variations in evaporation points on a heritage building. Environ Earth Sci 75(14):1113. https://doi.org/10.1007/s12665-016-5907-8
Martínez-Garrido MI, Fort R, Gómez-Heras M, Valles-Iriso J, Varas-Muriel MJ (2018) A comprehensive study for moisture control in cultural heritage using non-destructive techniques. J Appl Geophys 155:36–52. https://doi.org/10.1016/j.jappgeo.2018.03.008
Moropoulou A, Avdelidis NP, Koui M, Delegou ET, Tsiourva T (2001) Infrared thermographic assessment of materials and techniques for the protection of cultural heritage. In Multispectral and Hyperspectral Image Acquisition and Processing (Vol. 4548, pp. 313–318). SPIE.
Orr S, Fusade L, Young M (2020a) Moisture monitoring of stone masonry: A comparison of microwave and radar on a granite wall and a sandstone tower. J Cult Herit 41:61–73. https://doi.org/10.1016/j.culher.2019.07.011
Orr S, Fusade L, Young M, Stelfox D, Leslie A, Curran J, Viles H (2020b) Moisture monitoring of stone masonry: a comparison of microwave and radar on a granite wall and a sandstone tower. J Cult Herit 41:61–73. https://doi.org/10.1016/j.culher.2019.07.011
Pappalardo G, Mineo S, Caliò D, Bognandi A (2022) Evaluation of natural stone weathering in heritage building by infrared thermography. Heritage 5(3):2594–2614. https://doi.org/10.3390/heritage5030135
Sass O, Viles H (2010) Wetting and drying of masonry walls: 2D-resistivity monitoring of driving rain experiments on historic stonework in Oxford, UK. J Appl Geophys 70:72–83. https://doi.org/10.1016/j.jappgeo.2009.11.006
Sass O, Viles H (2022) Heritage Hydrology: a conceptual framework for understanding water fluxes and storage in built and rock-hewn heritage. Heritage Sci 10(1):66. https://doi.org/10.1186/s40494-022-00693-7
Scrivano S, Gaggero L (2020) An experimental investigation into the salt-weathering susceptibility of building limestones. Rock Mech Rock Eng 53(12):5329–5343. https://doi.org/10.1007/s00603-020-02208-x
Siegesmund S, Durrast H (2011) Physical and mechanical properties of rocks. Siegfried Siegesmund, Rolf Snethlage, edited. Stone in Architecture. Springer Heidelberg Dordrecht London New York. https://doi.org/10.1007/978-3-642-14475-2
Su B (1989) A preliminary study on Buddhistic niche statues of the Southern dynasties. Acta Archaeologica Sinica, 04:389-413+524-525. (in Chinese)
Sun C, Wang S, Zhou D, Li R, Li Y (2002) Differential weathering and pedogenetic characteristics of carbonate rocks and their effect on the development of rock desertification in karst regions. Acta Mineralogica Sinica 4:308–314. https://doi.org/10.16461/j.cnki.1000-4734.2002.04.004(inChinese)
UNESCO world Heritage Convention (UNESCO WHC). 2011. West Lake Cultural Landscape of Hangzhou. Retrieved from https://whc.unesco.org/en/list/1334/maps/
Viles H, Goudie A, Grab S, Lalley J (2011) The use of the Schmidt Hammer and Equotip for rock hardness assessment in geomorphology and heritage science: a comparative analysis. Earth Surf Proc Land 36(3):320–333. https://doi.org/10.1002/esp.2040
Wang Y, Pei Q, Yang S, Guo Q, Viles H (2020) Evaluating the condition of sandstone rock-hewn cave-temple façade using in situ non-invasive techniques. Rock Mech Rock Eng 53:2915–2920. https://doi.org/10.1007/s00603-020-02063-w
Wang Y, Viles H, Desarnaud J, Yang S, Guo Q (2021) Laboratory simulation of salt weathering under moderate ageing conditions: Implications for the deterioration of sandstone heritage in temperate climates. Earth Surf Proc Land 46(5):1055–1066. https://doi.org/10.1002/esp.5086
Wei ZW, Yu JQ, Zhang BJ (2018) Investigation report on the conservation status of cave temples and stone carvings in Hangzhou city. Hangzhou Relics Museol 01:2–12 ((in Chinese))
WeissT SassO (2022) The challenge of measuring rock moisture–a laboratory experiment using eight types of sensors. Geomorphology 416:108430. https://doi.org/10.1016/j.geomorph.2022.108430
Wilhelm K, Viles H, Burke O, Mayaud J (2016) Surface hardness as a proxy for weathering behaviour of limestone heritage: a case study on dated headstones on the Isle of Portland. UK Environ Earth Sci 75:931. https://doi.org/10.1007/s12665-016-5661-y
Xiao B, Wang F, Li C (2010) Engineering geological analysis of water disaster causes on grottos and its countermeasures. Innovation and Practice of Rock Mechanics and Engineering: Proceedings of the 11th National Conference on Rock Mechanics and Engineering, 332–337. Wuhan: Hubei Science & Technology Press. (in Chinese)
Yang Q, Sun PZ, Fumagalli L, Stebunov YV, Haigh SJ, Zhou ZW, Grigorieva IV, Wang FC Geim AK (2020) Capillary condensation under atomic-scale confinement. Nature 588(7837):250–253. https://doi.org/10.1038/s41586-020-2978-1
Zheng D (2008) Study on the ecogeographical regional system in China. Beijing: The Commercial Press. P366. (in Chinese)
Acknowledgements
We want to express our sincere appreciation to Prof. QIN Ying from the University of Science and Technology of China and Ms ZHANG Hong in OxRBL for their advice on the draft of this paper. We thank Dr LIU Yan, the lecturer in the School of Earth Sciences at Zhejiang University, for her kind assistance with the rock characterisation. We also thank Mr HONG Jun, the manager of the Ciyunling site, for his help with the fieldwork.
Funding
The study was funded by the Postdoctoral Science Preferential Funding of Zhejiang Province, China No. ZJ2022022.
Author information
Authors and Affiliations
Contributions
YW conceived and designed the field work and lab experiments of the study and performed the analysis of the results. YW and ZH collected the data from the site. The first draft of the manuscript was written by YW and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing Interest
The authors declare that they have no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Wang, Y., Hao, Z. & Zhang, H. In situ Investigation of the Moisture Distribution and Deterioration of the Façade of Limestone Rock-Hewn Heritage. Rock Mech Rock Eng 57, 2755–2762 (2024). https://doi.org/10.1007/s00603-023-03706-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-023-03706-4