Abstract
Gas-surface interactions at the Moon, Mercury and other massive planetary bodies constitute, alongside production and escape, an essential element of the physics of their gravitationally bound exospheres. From condensation and accumulation of exospheric species onto the surface in response to diurnal and seasonal changes of surface temperature, to thermal accommodation, diffusion and ultimate escape of these species from the regolith back into space, surface-interactions have a drastic impact on exospheric composition, structure and dynamics. The study of this interaction at planetary bodies combines exospheric modeling and observations with a consideration of fundamental physics and laboratory experimentation in surface science. With a growing body of earth-based and spacecraft observational data, and a renewed focus on lunar missions and exploration, the connection between the exospheres and surfaces of planetary bodies is an area of active and growing research, with advances being made on problems such as topographical and epiregolith thermal effects on volatile cold trapping, among others. In this paper we review current understanding, latest developments, outstanding issues and future directions on the topic of exosphere-surface interactions at the Moon, Mercury and elsewhere.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
In the gravitationally bound exospheres of massive airless planetary bodies like the Moon and Mercury, atoms and molecules undergo far more collisions with the planet surface than with each other. For this reason gas-surface atomic/molecular interactions, including (1) thermal accommodation, (2) sticking, (3) volatile diffusion within the regolith, (4) cold trapping, and (5) impact and radiation induced diffusion and desorption, have an outsized influence on the distribution, composition, and time variability of these atmospheres. The properties of an exosphere are therefore determined to a much greater degree by the exosphere’s interaction with the surface than with itself.
Since the Apollo era the observations of spacecraft and earth-based telescopes have revealed spatial and temporal variations of exospheric gas and surface frost distributions over many orders of magnitude in response to diurnal and, at some bodies, seasonal changes of surface temperature. Examples include the distribution of argon in the lunar atmosphere and on its surface, first investigated by Apollo and later by the NASA Lunar Atmosphere and Dust Environment Explorer (LADEE) spacecraft, e.g., (Benna et al. 2015; Hodges 2018; Hodges and Mahaffy 2016), and the distribution of Sodium in Mercury’s exosphere in relation to this planet’s surface ‘cold poles’ (Cassidy et al. 2016) (Sect. 8). Across the solar system, massive airless planetary bodies tilted to the ecliptic, including Saturn’s moons Dione and Rhea (Teolis and Waite 2016), Pluto’s moon Charon (Grundy et al. 2016; Teolis et al. 2022), and likely the massive Uranian moons – exhibit extreme seasonal changes in their exospheres on much longer timescales, driven by bi-annual condensation and evaporation of exospheric gases frozen at their poles. Yet remarkably, as we discuss in this chapter, even the Moon’s argon exosphere, despite its minor \(1.5^{\circ}\) angle to the ecliptic, exhibits some seasonal variability likely owing to seasonal condensation and evaporation of frozen argon to and from polar cold traps. In general bodies like the Moon and Mercury appear to represent the limiting case of a weakly seasonal exosphere, in which a day-night adsorption-desorption cycle is the primary effect, while the preponderance of permanent over seasonally shadowed polar cold traps act as ultra-long term exospheric sinks.
Other processes, such as impact and or radiation enhanced diffusion and desorption of semi-volatile species frozen to the surface regolith, and the chemical activation of surface regolith by impacting ions, e.g. from the solar wind, are only just beginning to be explored. Finally, surface microstructure, diffusion of adsorbed gas between regolith grains (Fig. 1), and surface topographical effects, including permanent, seasonal, and diurnal cold trapping, all influence the residence time of exospheric atoms and molecules on the surface material. The total surface interaction/residence time of exospheric species within a granular planetary surface, including the combined effect of surface diffusion and multiple accommodation, adsorption and desorption events between regolith grains (Fig. 1), is a critical parameter controlling the exospheric distribution between the day and night hemispheres, as well as any seasonal variability.
In this chapter we discuss the physics, open questions and current knowledge of three aspects of the surface-exospheric interactions at large airless bodies of the inner solar system: (1) accommodation, sticking and desorption, (2) regolith diffusion, and (3) surface impact/radiation processing and induced diffusion/ejection of adsorbed material.
2 Thermal Accommodation & Sticking
Energy accommodation is a fundamental and ubiquitous process common to surface-bounded exospheres. Accommodation constitutes the first step in the surface interaction of exospheric atomic or molecular species, and determines the local energy and altitude distribution of the exosphere above the surface. In simplest terms, any surface bounded exosphere consists of both a non-accommodated and an accommodated contribution. The non-accommodated supra-thermal component represents the exospheric source; i.e. neutral species freshly injected into the exosphere by processes such as impact vaporization, photodesorption, sputtering or radiogenic decay/outgassing from the surface, or charge-exchange at altitude. Some atoms from these high-energy processes have sufficient speeds to escape the planet’s gravity, or at least to reach high altitudes before falling back to the surface (e.g., Killen et al. 2018). The accommodated component, by contrast, interacts with the planetary surface to acquire an approximate Maxwell-Boltzmann velocity distribution at a temperature close to that of the local surface. The accommodated component has two sources: (1) exospheric neutrals that fall back to the surface under gravity and interact with the regolith, and (2) exospheric source atoms/molecules initially emitted from the surface in an accommodated state; e.g. off-gassing radiolytic or radiogenic species, or sputtered energetic species that impact other regolith grains and lose energy before ever entering the exosphere.
The supra-thermal and accommodated components may segregate into high and low altitude layers, as can be seen in Fig. 2 showing the predicted altitude profile for multiple exospheric species in Europa’s exosphere, and for sodium and argon in the Hermean and lunar exospheres, respectively. Compared to the Moon’s fully accommodated argon exosphere, energetic release processes at Mercury produce a more extended exospheric sodium altitude profile (Fig. 2) modified to a lesser degree by surface temperature-dependent sticking and accommodation (e.g., Burger et al. 2010; Leblanc and Johnson 2010; Tenishev et al. 2013). At both rocky and icy planetary bodies sufficiently volatile exospheric species may exhibit (1) an extended high-altitude exosphere from freshly sputtered molecules, and (2) a much denser low-altitude thermally accommodated layer (see Fig. 2; Europa’s O2 and H2O) with molecules lacking the kinetic energy to attain high altitudes in the exosphere. Hence the exosphere at high-altitude gives a more representative sampling of species immediately after ejection from the local surface below, whereas the low-altitude exosphere may be dominated by species which have interacted and accommodated with the surface many times. Surface gas densities may in fact be greatest at night owing to the colder surface there, which cools the exosphere, and reduces the gas thermal speed and exospheric scale height such as to concentrate the gas there. Examples of this interaction regime are some noble gases at the Moon (Benna et al. 2015). However, the opposite may happen for species such as lunar argon (Sect. 7) that can stick to the surface at the given surface temperature; surface gas densities will be lower at night if sufficiently cold for exospheric atoms or molecules to freeze to the surface.
The degree to which exospheric species accommodate with the surface on a single collision is quantified by the energy accommodation coefficient, which is the ratio (0 to 1) of energy transferred in a surface collision relative to that required for full accommodation. The accommodation coefficient depends on the mass, kinetic energy, and internal degrees of freedom (e.g. molecular rotations and vibrations) of the impacting species, and the magnitude of the interaction potential or binding energy with the surface (Bonfanti and Martinazzo 2016). Another major consideration is regolith porosity, which enhances the ‘effective’ accommodation of exospheric species undergoing multiple inter-grain collisions within the regolith before returning to the exosphere (Fig. 1).
The angular dependence of the velocity of a gas thermally accommodated to the planetary surface follows a Knudsen cosine-law (Comsa 1968; Knudsen 1909), which implies that the direction in which an atom or molecule rebounds from a surface is independent of the direction at which it approaches. The Knudsen cosine law can be understood in terms of the dispersing micro-geometry of the solid surface (Feres and Yablonsky 2004), but the same decorrelation is expected from thermal accommodation during contact. Armand (1977) determined the desorption velocity distribution based on lattice vibrations, and arrives at the Maxwell-Boltzmann flux distribution, which obeys the Cosine Law.
The interaction of gas phase molecules with surfaces can involve vastly complex chemical physics and depends on not only the molecule and the surface, but also the presence of co-adsorbates, surface temperature, incoming molecular energy (translational, ro-vibrational), and the crystal structure (defects, step edges, crystallographic plane, terraces). There are numerous high-level texts with more in-depth coverage of the material (e.g. Billing 2000; Ibach 2006; Kolasinski 2012; Morrison 2013; Zangwill 1988). Molecular beam experiments are reviewed in e.g. Arumainayagam and Madix (1991). The following is meant as only a general introduction to adsorption.
Energy transfer is a pre-requisite for adsorption. For trapping or sticking to occur, the incoming molecule must lose energy, with the molecule finally transferred into a bound adsorbed state. Adsorption is further divided into two categories, activated and non-activated. An easy way to visualize this is to utilize a Lennard Jones potential as shown in Fig. 3. If an impinging molecule has too much energy, the molecule will reflect as in a typical elastic collision (a). A molecule or atom may lose some energy after reflecting off the potential barrier where it then proceeds down well to a chemisorbed state (b). Alternatively, a small barrier may exist such that a slow molecule will trap in the shallow well resulting in a physisorbed state (c). The height of this barrier is what controls the activated or non-activated adsorption process.
At ‘low’ kinetic energies of order 0.1 eV or below, typical of most simple exospheric species at or below a few km/s speeds, gaseous species will transiently stick to the surface, with ample ‘sticking time’ (picoseconds or longer) in the surface interaction potential well to fully accommodate before thermally desorbing. At these low kinetic energies (which are albeit still up to thousands of Kelvins) the gas species are fully adsorbed during their interaction with the surface, with near unity accommodation and sticking coefficients. By contrast, sputtered species ejected with ‘high’ energies just shy of the planetary escape speed, or species accelerated by radiation pressure, may fall back to the planetary surface with eVs of energy, depending on the planet’s gravity (or escape speed) and species mass. At eV energies or above the impact of gaseous atomic species with surfaces may be better approximated as binary collisions between the impactor and a single target atom. Backscattered impactors may lose energy to the surface atoms elastically and inelastically in accordance with the back-scattering angle and relative projectile and target masses. Whereas light species (such as H, H2 or He) may have relatively low accommodation coefficients at eV energies, heavier impactors with mass similar to the target material atoms may exhibit accommodation coefficients closer to unity.
A caveat is that atomic or other reactive species, such as Na at the Moon or Mercury, may have high eV binding energies owing to chemisorption with the surface. Even at eV kinetic energies these reactive species may transiently stick and accommodate with the surface irrespective of their mass. Another consideration for molecular species at eV energies is the absorption of some of the collision impact energy into internal interatomic motions within the impacting molecule, such that the molecule loses translational kinetic energy in the collision with the surface by becoming internally excited.
2.1 Adsorption Models
Numerous adsorption models have been developed over the years that have resulted in analytical expressions of the adsorption process that include the energy dependence of accommodation. The first theoretical treatment of energy exchange/accommodation came from Baule (1914) and later by Zwanzig (1960), who treated the surface as harmonic oscillators that are excited by collision allowing the incoming molecules to lose energy elastically. Under these conditions the accommodation coefficient \(\alpha = \frac{4\mu}{ ( 1+\mu )^{2}}\), where \(\mu \) is the ratio of the incoming projectile mass to that of the surface species \(\mu = \frac{m_{p}}{m_{s}}\). A variation of this follows the hard cube model, where the incoming molecule is accelerated by an attractive potential (\(V\)) resulting in a simple modification to the Baule equation \(\alpha = \frac{4\mu +V/\varepsilon}{ ( 1+\mu )^{2}}\), where \(\varepsilon \) is the collision energy. These models assume that the surface is fixed at 0 K. Taking into consideration the average thermal distribution of surface velocities results in \(\alpha = \frac{4\mu (\varepsilon +V-kT/2)/\varepsilon}{ ( 1+\mu )^{2}}\) (Bonfanti and Martinazzo 2016). Other classical models of energy accommodation as a function of gas and surface temperature were described by Fan and Manson (2010). For a quantum mechanical description, see texts by Billing (2000) and Zangwill (1988). Accommodation coefficient have often also been measured in the laboratory (e.g., Haynes et al. 1992; Persad and Ward 2016).
The well-known Langmuir model (Langmuir 1918), applicable for sub-monolayer coverage, uses a single binding energy and assumes that adsorption and desorption are at equilibrium and reversible processes without an activation barrier. Using these assumptions, the fractional coverage is derived as \(\theta = \frac{K_{eq} p}{1+ K_{eq} p}\), where \(K_{eq} = \frac{k_{ad}}{k_{des}}\) is the ratio of the rate of adsorption to desorption and \(p\) is the partial pressure of the adsorbate. As evident from this equation, the sticking coefficient (\(S\)) is not dependent on the incoming incident energy, but simply the available surface coverage \(S\sim (1-\theta )\). The Langmuir model was a big leap forward in thinking about gas-surface interactions, but it deviated from experimental results more often than not (Becker and Hartman 1953; King and Wells 1974; Singh-Boparai et al. 1975). Moreover, the Langmuir model does not take into consideration the energy of the incoming particle.
Ideally, if the adsorption process does not have an activation barrier, the fraction of atoms or molecules that adsorb to the surface will decrease with increasing incoming energy. Here, the sticking probability for a non-activated process will be unity until the incident energy reaches a critical value, at which point it rapidly diminishes to zero. In reality, this apparent step function is smoothed out by thermal effects from the surface. The sticking probability for an ideal surface without an activation barrier can be modelled treating the surface atoms as hard cubes (Sipkens and Daun 2017). The cube has an attractive square well which accelerates the molecule as it approaches the surface to a velocity \(u_{n}\). As an approximation only the cube’s motion in the direction normal to the adsorption surface is considered, with the velocity dictated by the surface temperature \(T\). The normal component of the particle velocity \(v\) after collision with the hard cube has a modified Maxwell-Boltzmann distribution, \(P ( v ) dv= ( u_{n} -v ) e^{ ( \frac{-m}{2kT} v^{2} )} dv \). Sticking occurs if the normal velocity of the molecule after collision falls below a critical value which cannot escape the well. The sticking coefficient is derived from the total fraction of molecules below this critical velocity, \(v_{c}\), and can be analytically expressed as \(S=1+ \operatorname{erf} ( b v_{c} ) + \frac{e^{ ( - b^{2} v^{2} )}}{b u_{n} \pi ^{1/2}}\), where \(b^{2} = \frac{m}{2kT}\).
In the case of an activated adsorption process, the system will exhibit low sticking coefficients at low energies and low coverages. In this instance, a low energy molecule will reflect off the barrier and not adsorb. Here, the sticking coefficient is practically the inverse of the non-activated case and will be zero until it approaches the barrier height where it should approach unity and then drop off again as it approaches some critical value in energy where it approaches the elastic regime. Quantum tunneling and thermal effects will smooth this step function.
A follow-up to the Langmuir model was established by Kisliuk (1957), whose model allowed for the understanding of atypically high adsorption rates at high surface coverage (Kisliuk 1957). This model is best known as the precursor adsorption model. The theory behind the precursor adsorption model is relatively simple and is outlined in Fig. 4. Here, there are two types of precursors, intrinsic (adsorbate over an empty site allowing chemisorption) and extrinsic (adsorbate physisorbed over a filled site). The intrinsic molecules have a probability of adsorbing, desorbing, or migrating to an empty site, while the extrinsic molecules have a probability of desorbing or migrating. The sum of these probabilities yields an analytical expression of the sticking coefficient, \(S= S_{0} ( 1+ \frac{\theta}{1-\theta} K )^{-1}\), where \(K\) is the precursor parameter and is given by \(K= S_{0} \frac{P_{des} '}{P_{ads}}\) with \(S_{0}\) being the sticking constant at zero coverage, \(P'_{des}\) the desorption probability for the extrinsic molecule, and \(P_{ads}\) the probability for intrinsic chemisorption; both of which are products of the general Arrhenius equation with activation energy (\(E\)), prefactor \(f\), and the average residence time spent at a particular site (\(\tau \)) i.e. \(P=f e^{ ( \frac{-E}{kT} )} \tau \). Other widely used adsorption models are the Freundlich isotherm (with multiple binding energies), the Brunauer-Emmett-Teller (BET) isotherm (for multi-layer adsorption), and the Zeta Adsorption isotherm (Narayanaswamy and Ward 2020).
3 Volatile Diffusion in the Regolith
Gas atoms and molecules can travel in the voids between grains and penetrate centimeters into the ground (Reiss et al. 2021). Furthermore, adsorbed atoms can also travel along a grain and onto other grains following a slower diffusion mechanism called surface diffusion (Fig. 1). Although slow, surface diffusion can be the dominant mechanism of diffusion for species that bind strongly with the surface such as sodium (Sarantos and Tsavachidis 2020). We consider as an example the case of water vapor in the following discussion, to elucidate the physics of volatile migration and diffusion in a porous regolith.
3.1 Surface Bonding and Vapor Migration
Water molecules and other volatile species can migrate in the porous regolith via a repeated sequence of jumps. At room temperature the diffusion time is approximately the sum of times for each molecular flight, but at low temperature, migrating molecules spend most of their time residing on grain surfaces. In either case, the migration process can be thought of as a random walk, and it is thus described by a diffusion equation. The main uncertainty in quantifying the mass flux lies with the surface-vapor interactions.
At low temperature H2O can be in crystalline or amorphous form, or adsorbed at monolayer or sub-monolayer thicknesses onto a substrate. All naturally occurring ice and snow on Earth’s surface is crystalline with a hexagonal lattice structure. Although many other crystal structures are known for water ice, few are stable at low pressure. Amorphous ice is solid (condensed) H2O that lacks a crystal structure, and forms at very low temperatures (\(<\sim140~\text{K}\) at laboratory time scales; Sack and Baragiola 1993). It takes about a dozen monolayers of H2O until the properties of macroscopic ice are reached (Cadenhead and Stetter 1974). Lunar grains have a high specific surface area on the order of \(500~\text{m}^{2}/\text{kg}\) as indicated by measurements of grain surface areas in lunar soil samples (Heiken et al. 1991). The areal density of H2O molecules for a monolayer of solid ice is \(\vartheta = (\rho/\mu)^{2/3}\approx 10^{19}~\text{molecules}/\text{m}^{2}\), where \(\rho \) is the density of ice and \(\mu \) the mass of a water molecule. Multiplied, a monolayer of H2O corresponds to \(\sim5\times10^{21}\) molecules adsorbed per kg of lunar regolith, which equates to about a hundred parts per million by mass. Whereas most of the lunar surface is extremely desiccated, much higher water concentrations have been measured at some locations in the mid-latitudes (Honniball et al. 2021) and lunar polar regions (Colaprete et al. 2010; Feldman et al. 2001).
Vapor pressure, sublimation, and molecular residence times are closely related. The sublimation rate of ice in vacuum \(F_{\text{ice}}\) is given by the Hertz-Knudsen formula (Persad and Ward 2016; Watson et al. 1961b)
with \(p_{v}\) the equilibrium vapor pressure, \(k_{B}\) the Boltzmann constant, \(T\) temperature, and \(\mu \) the mass of an H2O molecule. When the vapor is in equilibrium with ice, the evaporation rate equals the condensation rate, and the above formula is the flux of a dilute ideal gas at the equilibrium vapor pressure. The flux of water molecules from the ice surface is the same with or without incoming water molecules, so this equation describes the sublimation rate into vacuum. A dependence \(F = F(\theta,T)\) of the sublimation rate on the surface coverage \(\theta \) is also typical for sub-monolayer coverage. Conversely, when \(\theta \) is much more than a monolayer, \(F = F_{\text{ice}}(T)\), and the equilibrium vapor pressure of a solid is of the form, \(p_{v}\propto \exp(-\Delta H_{\text{subl}}/k_{B} T)\), where \(\Delta H_{\text{subl}}\) is the sublimation enthalpy (the heat of sublimation). The average sticking time \(\tau \) of an atom or molecule on the substrate surface can also be derived from the inverse of the Polanyi-Wigner equation
where \(\nu \) corresponds to the vibrational frequency of the bond between the adsorbate and the substrate surface, typically \(10^{12}\)–\(10^{14}~\text{Hz}\), and \(Q\) is the energy of adsorption (Adamson 1982; Atkins 1986). Not all incident molecules stick to the surface. A fraction (\(1-S\)) of incident molecules are reflected from the surface (Persad and Ward 2016). For ice, the sticking coefficient at 40–120 K temperatures is in the range 1–0.7 (Haynes et al. 1992).
The binding energy of molecules adsorbed to the regolith or on amorphous ice differs from that in crystalline ice (Speedy et al. 1996). The sublimation enthalpy of crystalline ice is 51 kJ/mol, while adsorbed water has a 60–180 kJ/mol range of desorption energies on lunar regolith simulants (Hibbitts et al. 2011; Poston et al. 2013) and lunar samples (Jones et al. 2020; Poston et al. 2015) at sub-monolayer abundances. de Leeuw et al. (2000) report adsorption energies for H2O on forsterite surfaces of 100–172 kJ/mol. Other atoms such as sodium and potassium bind much more strongly with the silicate surface, with binding energies in excess of 174 kJ/mol (or 1.8 eV) (Yakshinskiy et al. 2000). Irradiation can increase the effective degree of bonding by creating defects and vacancies, while diffusion in powders may also increase the effective binding energy by slowing desorption (Sarantos and Tsavachidis 2020). Finally, surface microstructure prolongs the residence time of adsorbates on the surface by reducing the desorption yields via readsorption on adjacent grains (e.g., Cassidy and Johnson 2005; Sarantos and Tsavachidis 2020).
Figure 5 shows the residence time of water molecules (harmonic mean) as a function of temperature. Below roughly 250 K, the molecules spend most of their time residing on the surface and a comparatively short time in flight (assuming a 1 mm inter-grain flight distance). Additionally, the likely mobility of water adsorbates on surfaces with a distribution of desorption energies further changes the residence time by enabling motion between low and high energy sites. Sarantos and Tsavachidis (2021) have recently suggested that surface diffusion affects the desorption rate in a nonlinear manner, suppressing desorption at lower temperatures yet enhancing desorption at higher temperatures.
Similar conclusions can be drawn for less volatile elements like sodium, for which it can be shown that the residence time of atoms against thermal desorption is \(\sim1000\) years at maximum lunar surface temperatures, whereas on average several days elapse between desorption events for the more efficient photon-stimulated desorption mechanism (Sarantos and Tsavachidis 2020 and references therein). These timescales are much shorter at Mercury due to the higher surface temperatures. The surface residence times, along with the escape ratio, control the evolution of the atmosphere following episodic brightening events such as meteor showers (Colaprete et al. 2016).
3.2 Models of Subsurface Migration
Mathematically, the migration process can be described at three levels:
-
Molecular hops (random walk; discrete formulation)
-
Diffusion equation (continuum formulation; partial differential equation)
-
Boundary-value problem (for stationary solutions)
The first type of model is a statistical simulation of individual molecules (random walk). Molecular random walk leads to diffusive migration where molecules reside on grain surfaces and then hop a distance \(\ell \), which is the molecular free inter-grain path within the regolith (Schorghofer and Taylor 2007). The mean grain size in lunar soil samples is typically 45–100 μm (Heiken et al. 1991), which may be taken (Schorghofer and Taylor 2007) as a crude approximation of \(\ell\).
The migration process can also be described by a continuum equation. The net flux \(J\) of molecules is given by differences in sublimation rates between two grain surfaces, and therefore
where \(t \) and \(z\) are time and depth. The gradient in sublimation or desorption rate \(F\) is due to gradients in \(T\) or \(\theta \). Transport can be caused by differences in surface concentrations or by differences in temperature. At constant temperature, only concentration-driven migration occurs. Note that the time average of \(J\), the net flux, is given by the gradient of the time average of \(F\).
For situations that are stationary (time-independent, periodic, or quasi-periodic) the boundary-value formulation leads to insightful results. An example is the determination of the loss rate of ice buried by a layer of regolith of thickness \(\Delta z\). Mass conservation dictates that after a transient period, the flux \(J\) is constant between an ice table and the surface. Thereafter, the value of \(J\) is determined by the difference between \(F\) on the surface (which is essentially zero, because \(\theta \) is almost zero) and \(F_{\text{ice}}\) at the ice-regolith boundary. The loss rate is given by
The flux is reduced relative to sublimation from an exposed ice surface by a factor of the order \(\ell/\Delta z\). This equation is equivalent to the Knudsen flow through a porous medium. The Knudsen diffusion coefficient is proportional to the mean free inter-grain path \(\ell \), and the vapor density is related to \(p_{v}\), and therefore to \(F_{\text{ice}}\), via the ideal gas law.
Schorghofer and Taylor (2007) obtained two more solutions to the vapor migration transport equations for constant temperature. For slow continuous water delivery to the surface, there is an optimum temperature for which the amount of adsorbed subsurface water is at a maximum. At low temperature little H2O accumulates, because the migration is too slow. At temperatures exceeding the optimum the loss from the surface is so fast that few source molecules reside on the surface at any time. Similarly, for an ice cover at constant temperature, there is an optimum temperature which maximizes the subsurface H2O content. In both cases, the grain coverage is limited to about a monolayer of water, because, at constant temperature, differences in surface concentration are necessary for net transport of additional molecules. For time-varying temperature, subsurface vapor migration can lead to a “pumping effect”. Transport of H2O molecules can result from differences in sublimation rates with depth, even without change of mean temperature with depth. This phenomenon is described in more detail in Sect. 5.
The effect of inward migration on desorption of other adsorbates was studied with a three-dimensional model by Sarantos and Tsavachidis (2020). They used random walk simulations of desorption inside a granular medium consisting of spherical particles of different size. Using kinetic parameters that represent alkali, argon, and water adsorbates, it was demonstrated that surface and Knudsen diffusion, processes competitive to desorption, reduce the desorption rates from a porous medium beyond the rate reduction due to re-adsorption. Sarantos and Tsavachidis (2021) pointed out that thermal desorption from a granular medium is a decelerating process because it initiates Knudsen diffusion which in turn slows down desorption. These authors proposed that thermal desorption of adsorbates from a powder is not a first-order (i.e. constant rate) process, but is instead better approximated by a square or even higher order dependence of the desorption rate on the amount of adsorbate when diffusion is considered. This finding means that models consistently underestimate how long it takes for regolith to outgas volatiles such as CH4, CO and CO2 adsorbed weakly on the lunar night side because Knudsen diffusion is not properly accounted for. It was also demonstrated by Sarantos and Tsavachidis (2020) that diffusion leads to a non-linear and non-monotonic relationship between the surface temperature and alkali photodesorption rates from regolith.
It should be noted that bulk diffusion, i.e., diffusion within a solid structure, controls the source of fresh atoms for many of the atmospheric species found around Mercury and the Moon. For example, Killen et al. (2004) have described how diffusion of sodium in the grain rims controls the release rate for photon-stimulated desorption, thermal desorption and ion sputtering, processes that, unlike meteoroid impacts, can extract atoms only from the top nm of grains. Continuous diffusion of argon through the pore space between rocks in the top 25 km of lunar crust has been considered as a source for the lunar argon atmosphere (Killen 2002). And, finally, bulk diffusion followed by re-combinative desorption is responsible for converting the solar wind protons into the lunar H2 atmosphere (e.g., Tucker et al. 2019).
4 Cold Trapping
At low temperature, sublimation rates into vacuum become negligible. Figure 6 summarizes sublimation rates for a variety of volatiles (Zhang and Paige 2009). For example, the H2O loss rate at 115 K is around 0.1 m/Gyr, and the ice is said to be “stable” over geologic time periods. This is the phenomenon of cold trapping. Among volatiles that are abundant in comets (e.g. H2O, CO2) or volcanic outgassing (CO2, SO2, H2O) the one with the lowest sublimation rate is H2O (Watson et al. 1961b). It has long been realized that craters near the poles of Mercury and the Moon can be permanently shadowed and volatiles could have accumulated in these eternally cold regions (Thomas 1974; Urey 1952). Recently, cold traps have also been predicted and then observed on Ceres (Hayne and Aharonson 2015; Platz et al. 2016; Schorghofer et al. 2016).
The concept of “stability” (negligible sublimation rate) can be extended from surface cold traps to the subsurface. However, whereas surface cold traps can be supplied with water directly through an exosphere, processes that emplace ice at depth are rarer, e.g., burial by impact ejecta. Maps of subsurface ice stability of the lunar polar regions have been published by Paige et al. (2010) and Schorghofer and Williams (2020).
Another form of trapping for less volatile elements is provided by the surface microstructure. Sarantos and Tsavachidis (2020) demonstrated that at lunar temperatures, conditions for which thermal desorption of alkalis has a mean lifetime of thousands of years, about half the adsorbates never participate in photodesorption because they hide in shadows the size of the lunar grains (i.e. the underside of grains). This is equivalent to assuming in models that every atom has a 50% probability of reaction between desorption events. On the other hand, if surface diffusion is fast due to mobility of these adsorbates along the grain surface, all atoms can dislodge from the microshadows and participate in desorption but at reduced rates.
5 Vapor Pumping by Temperature Cycles
Under suitable conditions, H2O molecules can be “pumped down” into the regolith by periodic (day-night) temperature cycles, leading to an enrichment of H2O in excess of the surface concentration. The amplitude of temperature oscillations quickly decays with depth, and the strongly nonlinear dependence of molecular residence times on temperature leads to vertical drift processes, see Fig. 7. The concept of an ice pump (i.e., vapor pumping that leads to the accumulation of macroscopic quantities of ice in the subsurface) was first developed in the context of Mars (Mellon and Jakosky 1993), where pumping can occur from a humid atmosphere into a porous subsurface. For the tenuous atmosphere surrounding the Moon, volatile H2O molecules on the surface are the source of the pump. If the surface concentration is high enough and the temperature amplitude is significant, H2O will be sequestered (Schorghofer and Aharonson 2014).
The simplest form of an ice pump involves pumping from an ice cover. Crucial for the pumping mechanism is the damping of the temperature amplitude with depth. Since the vapor pressure at the ice is the saturation pressure, which has a convex shaped temperature dependence, larger temperature amplitude implies a larger vapor pressure, thus creating a gradient in vapor pressures that preferentially moves molecules downward. If the concentration is sufficiently high that the nonlinear temperature amplitude effect on the top surface compensates for the reduced saturation pressure of ice at depth, pumping occurs. A weaker form of the lunar ice pump occurs when it does not produce ice but only excess adsorbate.
If the time averaged sublimation rate of adsorbed water on the surface is sufficiently high, it can balance that of pure ice at depth. A pumping differential may be defined as
where the “ice table” corresponds to the shallowest depth with ice. If \(\Delta F > 0\), then downward pumping exceeds the upward loss. If \(\Delta F < 0\), the pumping is too weak and any subsurface ice experiences net loss.
The surface temperature and H2O surface concentration vary over time. Water molecules can accumulate at night (by delivery from an exosphere), but are lost when the surface warms in the morning. Quantifying the strength of an ice pump requires a quantitative model of the population of water molecules on the surface over time. Schorghofer and Aharonson (2014) have carried out model calculations for the surface population of adsorbed water molecules on the Moon. In their model, the temperature varies sinusoidally with time for half a solar day, which mimics daytime, and it is constant for the other half of the solar day, which mimics nighttime. Figure 8 shows the pumping differential as a function of mean and peak temperature. This phase diagram can be divided into three nearly complementary regions. At peak temperatures below about 120 K there is very weak pumping, and this parameter region nearly coincides with the temperature conditions for classical cold trapping. At peak temperatures larger than about 120 K and mean temperatures lower than about 105 K, significant pumping occurs. When the mean temperature is above \(\approx110~\text{K}\), neither pumping nor cold trapping occurs. Classical cold trapping and strong pumping are nearly complementary. Areas of strong pumping exhibit large variations in surface water concentration over one lunation.
On bodies without an atmosphere, pumping is an inefficient process due to the rapid loss of surface molecules to space relative to their downward diffusion. For every molecular hop from the surface downward there is probabilistically one hop upward and thus one molecule lost. The column-integrated subsurface ice density is smaller than the time-integrated supply of water by at least a factor of \(\ell/\Delta z\ll 1\). A rocky surface layer with large pore spaces (large \(\ell\)) favors fast diffusion, whereas dust (small \(\ell \)) is an inefficient medium for pumping. At most a few percent of the H2O delivered to the surface could have accumulated in the near-surface layer.
Maps of the pumping differential have been published by Schorghofer and Aharonson (2014) and Schorghofer and Williams (2020). The total area where substantial pumping occurs (a pumping differential larger than half the supply rate) is estimated to be more than five times the area of surface cold traps. Typically pumping occurs on pole facing slopes in polar areas, but within a few degrees of each pole the equator facing slopes are preferred.
6 Epiregolith Thermal Gradients
The surface layer on airless bodies is heated via solar radiation. To first order the distance from the sun, latitude, and albedo determine the average temperature at depth. In more detail, the thermophysical properties of the surface (e.g. thermal inertia, density, particle size, packing density) and rotational rate determine the depth at which this equilibrium is achieved and the magnitude of the thermal gradients that develop between the surface and subsurface. This ‘surface thermal gradient’ is time-varying, with the subsurface warmer than the surface at night and cooler than the surface during the day. In addition, for airless body surfaces dominated by fine particulates, the upper few particles radiate disproportionally to space relative to deeper particles and create an additional, persistent ‘epiregolith thermal gradient’ within the uppermost few 100 μm at times of day when the near-surface is sufficiently warm that radiation (rather than conduction) is the dominant heat transfer mechanism (e.g. Hale and Hapke 2002; Henderson and Jakosky 1994, 1997; Logan and Hunt 1970; Logan et al. 1973). The surface and epiregolith thermophysical properties influence the stability of volatile reservoirs and the time-varying nature of exosphere transport.
6.1 Thermophysical Properties: Moon, Mercury & Asteroids
Studies of lunar surface temperatures and physical properties benefit from an unprecedented amount of data compared to other airless bodies, including telescopic, orbital, in situ, and analyses of returned samples. Properties on small scales were determined from laboratory measurements and Apollo drill cores, and showed the lunar regolith to have a highly insulating upper layer and a more conducting lower layer (e.g. Carrier et al. 1991; Jones et al. 1975; Langseth et al. 1976). Analytical and numerical models based on these characteristics predict the lunar surface to be extremely insulating and capable of maintaining temperature extremes on short distances to the extent that shadowed regions near the lunar poles could harbor water-ice deposits (e.g. Vasavada et al. 1999; Watson et al. 1961a).
High resolution temperature maps are provided by the Lunar Reconnaissance Orbiter Diviner Lunar Radiometer and confirmed the extreme nature of the lunar thermal environment (Paige et al. 2010; Vasavada et al. 2012; Williams et al. 2019, 2017). Diviner also provides inferred physical properties of the surface including rock abundance (Bandfield et al. 2011), surface roughness (Bandfield et al. 2015), and regolith thermal inertia (Hayne et al. 2017). Critical to the interpretation of this dataset was a revision to the predominant two-layer lunar thermal model (e.g. Vasavada et al. 1999) to a continuously varying density and conductivity model (Hayne et al. 2017; Vasavada et al. 2012) that more accurately represents the regolith structure over depth scales of order 1 m (Fig. 9).
As described above, the thermal and diffusive properties of the lunar regolith afford significant protection to buried volatile reserves and thus increase their stability on geologic time scales. The same models used to derive surface properties from Diviner temperature observations and lunar topography can be used to predict subsurface temperatures (e.g. Hayne et al. 2017; Paige et al. 2010). In addition, sub-millimeter instruments (e.g. Chang’e 1 and 2 Microwave Radiometer) offer a direct temperature measurement of depths up to \(\sim2~\text{m}\). These data predict an area \(\sim10\times\) larger where ice is stable in the near subsurface than would be stable on the surface (Fig. 10) (Paige et al. 2010). A diurnal or seasonal connection between this potential reservoir and any putative surface reservoir or exosphere has not been established. However, the subsurface reservoir can be accessed via impacts, as was demonstrated by the LCROSS mission (e.g. Colaprete et al. 2010; Hayne et al. 2010).
The surface thermophysical properties of Mercury are currently poorly constrained. As such, the estimation of subsurface temperatures is uncertain. Numerical thermal modeling of Mercury was used to investigate temperatures associated with bright and dark regions suspected to be associated with surface and subsurface ice deposits (Neumann et al. 2013; Paige et al. 2013). However, these models assumed modified lunar thermophysical parameters as inputs. The Mercury Radiometer and Thermal infrared Imaging Spectrometer (MERTIS) instrument on BepiColombo will directly measure global surface temperatures at multiple times of day and allow accurate constraints on Mercury surface thermophysical parameters for the first time (Hiesinger and Helbert 2010).
Asteroids can differ significantly from the Moon with regards to regolith formation, age and gardening and thus a wide range of surface thermophysical properties are expected on different types of asteroids. Inferred thermal inertias of asteroids range from \(<20\) to \(700~\text{Jm}^{-2}\,\text{K}^{-1}\,\text{s}^{- 1/2}\) (Hanuš et al. 2018).
6.2 Temperature Gradients Inside the Epiregolith
Early laboratory measurements of returned Apollo soils showed significantly different emission behavior when samples were measured in typical laboratory conditions and under a simulated lunar environment (Logan and Hunt 1970; Logan et al. 1973). Since those first measurements, experiments have grown more sophisticated and spectral effects associated with varying sample composition, albedo, temperature, porosity, and roughness have been investigated (e.g. Donaldson Hanna et al. 2016; Henderson et al. 1996). Several environmental and sample characteristics explain these discrepancies. First, fine particulates under vacuum are extremely insulating. Second, when exposed to a cold shroud the surface particles rapidly cool off. Third, a broadband lamp deposits heat to depths greater than a few particles. And fourth, emission in the thermal infrared is depth-dependent on wavelength. In total, these simulated lunar conditions produce an emission spectrum where some radiation comes from the warmer interior (at the Christiansen feature emissivity maximum) and some radiation comes from the cold exterior (at the Reststrahlen Band absorption bands). Diviner orbital measurements have confirmed the spectral effects of these thermal gradients on the lunar surface (e.g. Donaldson Hanna et al. 2016; Greenhagen et al. 2010).
Efforts to model the epiregolith thermal gradients have demonstrated the underlying physics, including a dependence on scattering properties, particle size, and packing density. There remains some uncertainty as to the actual magnitude of near-surface thermal gradients on the Moon, Mercury and other airless bodies. Using similar but different computational methods, Henderson and Jakosky (1997) predict gradients of 40–50 K per 100 μm under lunar-like conditions, whereas Hale and Hapke (2002) predict gradients closer to \(\sim10~\text{K}\) per 100 μm (Fig. 11). Comparing laboratory measurements of quartz under simulated lunar conditions to models, Millán et al. (2011) infer thermal gradients similar to those calculated by Henderson and Jakosky (1997). Epiregolith temperature varies with time of day (Fig. 11, bottom) and latitude. Models indicate that even during the day, the lunar epiregolith is cooler at the surface than at depth, owing to the (wavelength-dependent) optical transmission of thermal infrared radiation through the upper few 100 μm of regolith to space. As a result, temperature rises relatively steeply within the topmost hundreds of microns of regolith before gradually decreasing to approach the diurnal average temperature at \(\sim1~\text{m}\) depth (Fig. 11). At cooler, night-time temperatures, radiative cooling is less important and epiregolith temperature is nearly constant with depth.
The ability of Mercury and asteroids to produce epiregolith thermal gradients of a magnitude large enough to significantly affect the exosphere is unknown. Certainly, some asteroids have coarse particle regolith that would inhibit the formation of a thermal gradient in the epiregolith. In addition, even fine-grained bodies further from the sun would experience lower maximum temperatures where the magnitude of the epiregolith thermal gradient is largest and potentially reduce the effects of this phenomenon. Mercury, on the other hand, is expected to have fine-grained regolith, rotates slowly, and is near to the sun. However, the albedo of Mercury is darker than the Moon and this is expected to reduce epiregolith thermal gradient development.
6.3 Epiregolith Effects on Surface Reservoirs
Epiregolith thermal gradients on the Moon, Mercury or asteroids have the potential to be significant drivers of exospheric transport. Remote sensing reports in the UV and NIR often consider surface temperature when discussing the potential for diurnally varying (or invariant) surface hydration (e.g. Hendrix et al. 2019; Li and Milliken 2017). Variations of temperature with depth have been used to estimate the “pumping” of water vapor into the regolith as described above. Additionally, an increase of temperature with depth in the first mm of soil has been shown in simulations to keep sodium adsorbates near the top of the surface, to decrease inward diffusion, and to increase desorption flux (Sarantos and Tsavachidis 2020).
However, more important than a generalized ‘surface’ temperature, is the distribution of temperatures of the actual grains from which the light is scattered. Due to epiregolith thermal gradients, these temperatures must be lower than the temperatures predicted by typical thermal models (e.g. Hayne et al. 2017; Vasavada et al. 2012) that do not resolve the epiregolith. Observations of thermal emission at short wavelengths (\(\sim3~\text{microns}\)) may also be biased towards higher temperatures due to surface anisothermality effects (e.g. Bandfield et al. 2018). As a result, a wide range of different ‘thermal corrections’ to these types of data have been presented in literature (e.g. Bandfield et al. 2018; Li and Milliken 2017; Wöhler et al. 2017). The significance of this variance on exosphere transport and surface volatile reservoirs is currently unknown and represents an area of ongoing research.
7 Lunar Exosphere
The Moon’s 40Ar exosphere, first studied over a half century ago during the Apollo missions as one of the first species detected in the lunar exosphere, is one of the oldest and most spectacular examples of a planetary atmosphere dominated by adsorption and desorption to and from the surface. The effect is best illustrated in Fig. 12, which shows the diurnal profile of exospheric surface 40Ar gas density as a function of time measured during two different lunations by the surface mass spectrometer LACE (Hoffman et al. 1973). The argon gas density decreases from dusk to dawn as a result of the adsorption into the progressively colder nighttime surface (dayside LACE measurements were deemed unreliable). This implies that the dominant regolith interaction is adsorption-desorption (Hodges and Mahaffy 2016). The dawn surge in the exospheric density (Fig. 12) is consistent with desorption of 40Ar as the cold night surface is rapidly heated by the rising sun.
The shape of the density decline during the night is controlled by the strength of the interaction of the argon atoms with the surface. The residence time (time spent by an argon atom on a surface grain) has an exponential dependence on its heat of adsorption \(Q\) (Sect. 3.1), which is a still poorly constrained value that determines the shape of the density decline at night. The exospheric simulations performed by Hodges (1980) to explain the argon density decline revealed that the heat of adsorption was 0.26 eV (Grava et al. 2015 derived a similar value of 0.28 eV). This value is much higher than the value derived by adsorption experiments of 40Ar on glass (0.16 eV; DeBoer 1968). The very high value of \(Q\) for 40Ar inferred from LACE may be a radiation effect; e.g. trapping of 40Ar atoms in radiation defects. Hodges (1980, 2018) suggested that 40Ar’s high heat of adsorption may be a result of the exceptional cleanliness of the lunar soil grains unattainable in laboratory, due to the removal of water molecules from high-energy adsorption sites by prolonged exposure to solar wind or serpentinization (sequestration of water molecules by reaction with olivine).
According to Hodges and Mahaffy (2016) this adsorption of argon on cold lunar surfaces enables 40Ar to be trapped in Permanently Shaded Regions (PSRs) which never receive direct sunlight, or seasonal cold traps shielded from direct sunlight only during winter. Regular seasonal deviations of the exospheric 40Ar abundance from a steady state exospheric model were observed by LADEE/NMS as shown in Fig. 13, consistent with adsorption of argon in seasonal cold traps. The \(1.5^{\circ}\) tilt of Moon’s rotation axis gives rise to “seasons” in the argon atmosphere of the Moon, where argon atoms freeze in the seasonal cold traps near one pole, and then desorb back into the exosphere later around lunar equinoxes. In Fig. 13, the peak exospheric density measured by LADEE was in January 2014, about 1 month after the lunar vernal equinox (in December), when the seasonal cold traps at the north pole begin to release the adsorbed atoms. This delay may be accounted for by variations in transport time through the exosphere and in thermal inertia (Hodges and Mahaffy 2016). Similar behavior may be expected for other condensable species such as H2O. It’s also possible that sub-monolayer deposits of argon exist together with other condensable species on the lunar PSRs perennially, making the measurement of 40Ar valuable for inferring the possible behavior of other condensable species such as water that are more difficult to measure.
A dawn surge (Fig. 12) was also detected in the exospheric methane density (Hodges 2016) by LADEE/NMS, indicating that this species also condenses to the cold lunar night side. However the CH4 sunrise density maximum is shifted from dawn by almost 1 hour into the day (7:00 am local time). Argon, too, has a delayed sunrise density maximum, although the delay is shorter (at 6:40 am). The delay was interpreted by Kegerreis et al. (2017) to be due to temporary sequestration of argon atoms that migrate deep into the regolith during the night. This argon reservoir is at first unable to re-migrate upwards after sunrise as the sub-surface remains for a time colder than the surface. As a result, the argon atoms are released later, possibly as late as mid-morning. Evidence for this interpretation was obtained by Sarantos and Tsavachidis (2021) with a three-dimensional simulation (Sects. 3.1–3.2) of argon transport inside piles made of spherical grains of porosity \(\sim0.55\). They found that inward diffusion does not occur at night, but rather as the regolith warms at dawn, with no temperature gradient required. If that is the case, then other condensable species can display the same behavior. Figure 14 shows the exospheric density measured at the lunar surface by LACE for several species: 40Ar and 36Ar, CO2, and CO or N2. Of these, only 40Ar exhibits a clear sunrise exospheric density maximum. The lack of a sunrise density maximum at mass 28 is understandable for CO, which is less condensable than 40Ar (Zhang and Paige 2009), and for N2, which is not expected to condense. However the lack of a sunrise surge for mass 44, if it is CO2, is less understandable, since this less volatile species may remain adsorbed up to substantially higher temperatures than 40Ar. More measurements from orbit or from the lunar surface are needed to understand this discrepancy and to reveal the true identity of these detections.
Examples of the type of variation expected from gases that only weakly interact with the surface are provided by the detections of lunar He and Ne, which are illustrated in Fig. 15. Instead of the Ar vapor condensation that follows the night time cooling of the surface from dusk to dawn, the surface exospheric gas densities for the more volatile He and Ne atoms are most dense on the night side, showing an anti-correlation to surface temperature \(T\) (which decreases continuously during the night due to thermal inertia), and follow approximately a law \(n\propto T^{-5/2}\) at flux balance (Hodges and Johnson 1968).
8 Mercury’s Exosphere
Although numerous species have been observed in Mercury’s exosphere as reviewed in the companion chapters by Grava et al. and Leblanc et al., sodium is a species that exemplifies circulation as a manifestation of gas-surface interactions discussed in this chapter. Mercury’s sodium exosphere has been observed since its discovery in 1985 (Potter and Morgan 1985) and is produced by photon-stimulated desorption, and thermal and impact vaporization (Killen et al. 2007), with a relatively minor contribution from ion sputtering (McGrath et al. 1986). Since this first detection, several further observations from ground telescopes were performed, with Mercury at different True Anomaly angles and phase angle, with the aim of determining the temporal (i.e. function of True Anomaly Angle) and spatial (i.e. function of local time) variability of exospheric sodium. These observations are summarized in the companion paper by Leblanc et al. Almost twenty years after the first detection, two particular observations by Potter et al. (2002) and Schleicher et al. (2004) shed new light on the sodium cycle on Mercury and represented a milestone in the study of the its exosphere.
The observation by Potter et al. (2002) showed a long tail of escaping sodium neutral particles. This observation revealed how the radiation pressure of the Sun increases both the probability of sodium escape and the net sodium transport from the day side to the night side. Since the radiation pressure depends on the Doppler shift between neutral atoms and solar spectrum, the radiation pressure is not constant, but varies over the course of the Mercury year (Smyth and Marconi 1995) – and also varies, with some positive feedback effect, with the acceleration of the particles towards the night side.
Shortly thereafter, Schleicher et al. (2004), published the first sodium observation obtained during the 2003 transit of Mercury in front of the solar disc. Transit observations have the peculiarity of immediately providing information about the distribution of sodium at the terminator, thus revealing any dawn-dusk asymmetries and other latitudinal effects. The observations (Fig. 16, right) actually showed an excess of sodium at dawn, while sodium seemed virtually absent on the dusk side. Furthermore, it was noted that sodium increases in correspondence with the polar regions. Mura et al. (2009) reproduced these observations by means of an exospheric model with a rotating surface (Fig. 16, right), starting from the evidence, already noted by Sprague (1992), that the major processes of release occur on the day side, while the nocturnal surface necessarily fills with sodium, thanks to the exospheric migration and the radiation pressure. The sodium particles that precipitate on the night side are released only as the night side reaches the terminator, i.e. at dawn. This nocturnal filling and dawn release mechanism can explain both the asymmetry and, almost quantitatively, the column density of sodium at dawn observed from ground. Deviations between the observations and the model can easily ascribed to other replenishment mechanisms such as volume diffusion (Killen et al. 2004) or precipitation of micrometeorites.
In the observations of Schleicher et al. (2004), another feature that reveals much about the sodium cycle on Mercury is the presence of two bulges close to the north and south poles. Because of the observation geometry, it is not possible to tell the exact region of emission of these populations but it looks quite obvious that they may be ejected from the cusp regions, i.e. where the solar wind enters the magnetosphere and precipitates onto the surface (e.g. Mangano et al. 2013).
To test this hypothesis, the solar wind conditions at the time of observation were modeled to estimate the flux of the solar wind precipitating onto the cusps, and the resulting augmentation of exospheric sodium over these regions (Sarantos et al. 2008, 2010). Such simulations also provide the correct N/S asymmetry (modulated by the \(x\) component of the Interplanetary Magnetic Field), thus increasing the testability of the proposed mechanism. Finally, measurements of sodium’s energy distribution from observations of the Doppler shift in its emission spectrum (of neutral sodium in the radial direction), and of the exospheric scale height, provide constraints on the Na exospheric temperature. Such Doppler measurements of the velocity distribution of the Na particles are reproduced only if the ejection source is assumed to have a temperature around 1000 K–1500 K. Hence, the simplest explanation is that the source is photon-stimulated desorption, modulated by proton precipitation through the cusps that induces a more intense diffusion (Sarantos et al. 2008, 2010) and, eventually, release from the surface. In principle, ion sputtering (IS) could work as well, but it would be necessary to review its energy distribution with respect to known laboratory measurements (Wurz and Lammer 2003).
Regarding the annual variability, and the persistence of the dawn-dusk asymmetry at different True Anomaly Angles (TAA) angles, Leblanc and Johnson (2010) have extensively studied the annual trend of Mercury’s exosphere and, according to their model, the asymmetry is substantially permanent. Note that dawn, technically, changes position – from \(90^{\circ}\) east of the sub-solar point, to \(90^{\circ}\) west – for a short time close to perihelion, because in this period Mercury has a slightly retrograde motion. This work suggests that current models fail to reproduce the seasonal variability as established from existing ground-based observations. More detail about these models is provided in the companion paper by Leblanc et al.
At the time of the 2006 transit of Mercury, new observations were performed by Potter et al. (2013), who did not observe the dawn/dusk asymmetry. This would suggest a strong variability as a function of the TAA. This effect has been studied extensively (Leblanc and Johnson 2010; Mangano et al. 2013; Milillo et al. 2020). However, the main issues with ground-based observations are that they suffer from the inevitable discrepancies between the calibrations of different telescopes, from the phase angle’s high variability, and from the difficulty in disentangling the trend with true anomaly. Hence, before the MESSENGER (Mercury Surface, Space Environment, Geochemistry and Ranging) mission, it was thought that the day-night cycle (and the resulting dawn/dusk asymmetry) was a fairly robust paradigm, since the effect that brings the sodium particles onto the night side is basically permanent. The first global observations by MESSENGER (Cassidy et al. 2016, Fig. 2, right) have substantially modified the previous understanding of the sodium day/night cycle, or at least implied the presence of some effects not yet considered. In fact, such observations indicate that at certain true anomalies the sodium atmosphere peaks in the afternoon. A peak in the exospheric sodium column density persists over the cold planetary longitudes, known as “cold poles”.
The surface temperature plays an important role in modelling the sodium exosphere. First, thermal desorption produces a thermalized, low altitude population of sodium particles quickly evaporating from the dayside surface. Surface temperature also controls the diffusion rate (Killen et al. 2004) which brings fresh sodium atoms to the uppermost layer of regolith grains, ready for photon-stimulated desorption to release them. In simplified models, the Mercury’s surface temperature is assumed to depend only on some power of the solar zenith angle in the dayside (e.g., 1/4), and assumed to be uniform on the night side (Leblanc and Johnson 2003; Vilas et al. 1988; Wurz and Lammer 2003). As such, the sub-solar point and night side temperatures depend only on the distance from the Sun. However, due to the 3:2 spin/orbit resonance, the longitudes at \(90^{\circ}\) and \(270^{\circ}\) are at the subsolar point always in correspondence with the aphelion, causing these regions to receive, on a two-yearly cycle, less heat than any other equatorial region.
Cassidy et al. (2016), observing that the sodium exosphere increases above the longitudes of the cold pole of Mercury, deduced that the surface at these longitudes functions as reservoirs/sinks for Na particles. The average temperature being lower there, over long time-scales, causes less Na release on average, which may result in the formation of two sodium reservoirs at \(90^{\circ}\) and \(270^{\circ}\). According to these authors, the reservoirs are filled when the anti-sun sodium transport is maximum and when the cold poles are close to the terminator.
This observation requires very complex modelling to be reproduced. In principle, to account for the presence of cold poles, one could just improve the surface temperature models, using for example more sophisticated ones. Unfortunately, this approach does not work well, neither by applying the Mura et al. (2009), nor the Leblanc and Johnson (2010) models. In general, the issue is that when a cold pole region is on the night side, it isn’t a “sink” more than any other element at other longitudes (any sodium particle falling onto the night side remains close to where it falls). On the other hand, when the “cold pole region” is on the day side, it cannot emit sodium and act as a sink at the same time. In other words, the models are able to accumulate sodium at the cold poles, but, when Mercury is at \(\text{TAA}=250^{\circ}\) (bottom of Fig. 17, right panel) such a “modelled” cold pole has already crossed through the whole dayside, and presumably has lost most of the surface sodium. However, on average, a model like that by Mura et al. (2009), if fed with an updated temperature map, is able to predict an average excess of sodium on the surface at \(90^{\circ}\) and \(270^{\circ}\) (on a 2-year/full solar day average). If we assume that such a cold pole enhancement has worked for ages in the past, causing a permanent excess of sodium at \(90^{\circ}\) and \(270^{\circ}\), then we are able to better reproduce the observations (Fig. 17, right panel). More modelling is needed to fully understand these observations, and detailed steps for improving these simulations are offered in the companion paper by Leblanc et al. (this journal). Since it is difficult to separate annual variability from local time by means of ground-based observations, MESSENGER data will remain the only useful dataset for such studies until BepiColombo data becomes available in 2026.
8.1 Surface Features & Exospheric Replenishment
An important consideration in the analysis of Mercury’s surface-exospheric interaction is the presence of geological features with unique surface compositions, which may supply the exosphere with inhomogeneously distributed ejected/sputtered or outgassed source species. These localized ‘primary’ gas sources act together with ‘secondary’ surface-exospheric interactions to determine Mercury’s exospheric structure and composition. It is therefore essential to consider the spatial variations of the exosphere and their possible relationships with the surface composition and its geological features (Wurz et al. 2010). Mercury’s surface is characterized by numerous geological features that are evidence for volcanic and tectonic activity in the past (e.g., Byrne 2014; Strom et al. 1975), when the presence of volatiles certainly played a major role in crustal evolution. Widespread effusive volcanic plains cover the planet and several vents of pyroclastic origin are present (Thomas et al. 2014). Thousands of scarps, which are the surface expression of the planet’s global contraction (Strom et al. 1975), often form long prominent alignments (e.g., Byrne 2014), some of which likely formed under fluid or gas overpressure (Galluzzi et al. 2019). Such a geological asset certainly caused gas migration and seepage during Mercury’s early history, at least up to 1.7 Ga, when the pyroclastic activity, the youngest of these processes, likely ended (Thomas et al. 2014). Today, just a few small fault-scarps are thought to be active (Watters et al. 2016), and albeit too small to be sources of high degassing, they are proof of a planet which is still contracting today. Volatile ascent is known to be particularly effective on a cooling planet, and the surficial layer of Mercury’s crust is today a permeable net of fractures caused by fault patterns and impact craters (up to 4.5 km deep) that could easily permit outgassing.
Mercury’s exospheric replenishment by surface feature activity likely takes place at several scales today. At the regional scale, Mercury is characterized by large geochemical terranes (Weider et al. 2015) mapped by using the data acquired by the X-Ray Spectrometer (Nittler et al. 2018). The most extensive terrane is the high-Mg region covering a large part of Mercury’s surface (Fig. 18a). This same region also appears to be characterized by elevated percentages of Ca (Nittler et al. 2018), although the available map coverage is limited due to the possibility of measuring the abundance of Ca during solar flares only (Weider et al. 2015). MESSENGER measurements highlighted a correlation between the Mg-rich surface and the Mg exosphere (Merkel et al. 2018).
At the local scale, hollows are peculiar features that could contribute to the exosphere. Hollows are shallow irregular and rimless flat-floored depressions with bright interiors and halos, often found on crater walls, rims, floors and central peaks (Fig. 18b) (Blewett et al. 2018; Thomas et al. 2014). These features, from tens of m to tens of km, are scattered all over the surface. Due to their fresh appearance, the hollows are believed to form via a mechanism that could involve either depletion of subsurface volatiles (Blewett et al. 2018), such as chlorides and/or sulphurs (Blewett et al. 2018; Lucchetti et al. 2018; Pajola et al. 2021), or when sublimation or destruction of a volatile-bearing phase weakens the host rock as scarp retreats. Several processes have been suggested for the possible release of volatiles for both scenarios (Blewett et al. 2018) such as sublimation, thermal desorption, photon stimulated desorption (PSD) (Schaible et al. 2020), chemical sputtering, micrometeorite impact vaporization and pyroclastic volcanism. To understand if the hollows volatiles could contribute to the exosphere, laboratory measurements on the PSD of CaS powder (an analogue for oldhamite), which could be a predominant component of hollows identified within craters, have been performed. These measurements have been used to model the release of Ca by PSD from the Tyagaraja crater, which is characterized by hollows on its floor. The modeling showed that the localized neutral micro-exosphere produced from Ca PSD can be substantial even if only 1% CaS is assumed in the hollows field located in the crater (Bennett 2016). It is possible that hollows-forming volatile material could contribute to the Hermean exosphere, although the existing measurements do not have sufficient resolution to detect such a correlation.
The observed correlation between the Mg in the exosphere and the surface regions having the highest Mg/Si ratios (Merkel et al. 2018) demonstrates how surface composition data may be important in understanding the exospheric processes and variation. At the Moon the same conclusion was reached by the finding that the potassium exosphere is densest over the potassium-rich KREEP soils (Colaprete et al. 2016; Rosborough et al. 2019). MESSENGER was able to derive information on Mercury’s surface composition with a spatial resolution of tens or hundreds of km and a low spectral sampling. Other refractory elements, like Ca, may exhibit a similar correlation, but it is necessary to know the surface composition with better accuracy. Improved measurements will help in distinguishing the contribution of the different source mechanisms, such as meteoroid impact vaporization which is assumed to be relevant for these elements.
9 Future Work
With the vast and complex array of gas-surface interactions expounded upon in this chapter, atmospheric science at the Moon, Mercury, and at other rocky and icy planetary bodies with surface-bounded exospheres is now at a crossroads. With an ever increasing understanding of the energy and material exchange between the atmospheres and surfaces of planetary bodies with surface-bounded exospheres, the field is now positioned for the development of a new generation of exospheric models. The most sophisticated exospheric models of the Moon and Mercury take into consideration solar energetic particle driven regolith grain diffusion as suggested by McGrath et al. (1986), or the surface sticking time of exospheric volatiles onto an assumed smooth surface, and treat cold trapping with a simple stochastic approach (e.g. Grava et al. 2015; Leblanc and Johnson 2010; Mura et al. 2009). Details including local temperature variations, versus location and depth, and the position and time dependence of topographical shadowing are now beginning to be implemented into exospheric models of the Moon (Prem et al. 2018; Schorghofer et al. 2017). Higher-fidelity models at the Moon, Mercury, and elsewhere would also take into account improving knowledge of the effects of porosity on outgassing from regolith (Sarantos and Tsavachidis 2020, 2021). New estimates of the binding energies and ejection energy distributions of sputtered atomic species such as Na from surfaces of different mineral compositions are being furnished by molecular dynamics simulations (Morrissey et al. 2022), which will be highly useful in improving the accuracy of future exospheric models. Epiregolith thermal gradients should also be considered when modeling exosphere transport and surface volatile distributions. Such simulations would have the capability to map the time-evolution of surface ‘frosts’, in the shadows of mountains or craters, or in PSRs, with the changing solar position, taking into considering both (1) the diffusion of gas into the regolith, including the ice ‘pump’ phenomenon and epiregolith gradient effects discussed in this chapter, and (2) the removal/addition of volatiles to and from the exosphere.
A detailed understanding of the migration of frozen exospheric volatiles across the surface, and within the regolith, would empower future remote and in situ observers to understand and pinpoint to an unprecedented degree the probable locations and abundances of ices and other volatile repositories on the Moon and Mercury. The answers to these questions is highly dependent on the degree to which these ‘ices’ are sputtered or otherwise radiation processed; an understanding of which requires knowledge of the distribution versus position and depth of these materials. Exospheric simulations which simultaneously track the detailed surface thermal and frozen volatile distribution, including topographical effects (Paige et al. 2010), require significant computing resources, but ever increasing computing capabilities have for the first time made such models practical and feasible to carry out. The combined power of a new generation of models and experiments to inform and interpret spacecraft remote and in situ observations portends a new phase in the exploration of planetary atmospheres not only at the Moon and Mercury, but at the icy bodies of the outer solar system and beyond.
The effort to understand gas-surface interactions throughout the inner solar system will soon be assisted by a new generation of measurements from solar system exospheres. The renewed emphasis on lunar exploration will provide the international community data from commercial lunar landers equipped with a variety of spectrometers. Constraining the true identity of exospheric detections, such as the mass 44 signal ostensibly attributed to CO2 by LACE (Sect. 7), will be a high priority for such instruments, and essential to understand the degree to which these species stick to and diffuse on the lunar surface. In situ determination of activation energies for desorption can be expected from the upcoming Volatiles Investigating Polar Exploration Rover (VIPER) mission. These measurements will eventually be complemented by packages to be deployed by humans during the Artemis missions. BepiColombo’s SERENA instrument package (Orsini et al. 2021) will map the density, distribution and composition of Mercury’s exospheric gas species through in situ measurements (with Strofio) and remote sensing of charge-exchanged species (with ELENA). Future spacecraft measurement of exospheric Na, Ca, K and S and their spatial relationship with the hollows will contribute to understanding not only of the relationship between the surface and exosphere, but also to the evolution and formation of the hollows. The BepiColombo MERTIS instrument will also provide critical observations to determine the magnitude of epiregolith thermal gradients at Mercury (Hiesinger and Helbert 2010). Additionally, the spacecraft’s SIMBIO-SYS remote sensing instrument package (Cremonese et al. 2020) will improve the accuracy of composition data, providing global coverage of Mercury’s surface at high (480 m/pixel) spatial resolution. These measurements to be carried out during the coming decade will improve on current understanding from MESSENGER mission data of Mercury’s exospheric-surface interactions.
References
Adamson AW (1982) Physical Chemistry of Surfaces, 4th edn. Wiley-Interscience, New York
Armand G (1977) Classical theory of desorption rate velocity distribution of desorbed atoms; possibility of a compensation effect. Surf Sci 66(1):321
Arumainayagam CR, Madix RJ (1991) Molecular beam studies of gas-surface collision dynamics. Prog Surf Sci 38(1):1
Atkins PW (1986) Physical Chemistry, 3rd edn. Oxford University Press, Oxford
Bandfield JL, Ghent RR, Vasavada AR, Paige DA, Lawrence SJ, Robinson MS (2011) Lunar surface rock abundance and regolith fines temperatures derived from LRO Diviner radiometer data. J Geophys Res 116:E00H02
Bandfield JL, Hayne PO, Williams JP, Greenhagen BT, Paige DA (2015) Lunar surface roughness derived from LRO Diviner radiometer observations. Icarus 248:357
Bandfield JL, Poston M, Klima R, Edwards C (2018) Widespread distribution of OH/H2O on the lunar surface inferred from spectral data. Nat Geosci 11:173
Baule B (1914) Phenomena in rarefied gases. Ann Phys 44:145
Becker JA, Hartman C (1953) Field emission microscope and flash filament techniques for the study of structure and adsorption on metal surfaces. J Phys Chem 57(2):153–159
Benna M, Mahaffy PR, Halekas JS, Elphic RC, Delory GT (2015) Variability of helium, neon, and argon in the lunar exosphere as observed by the LADEE NMS instrument. Geophys Res Lett 42(10):3723
Bennett CJ (2016) Investigating potential sources of Mercury’s exospheric calcium: photon-stimulated desorption of calcium sulfide. J Geophys Res, Planets 121(2):137
Billing GD (2000) Dynamics of Molecule Surface Interaction. Wiley, New York
Blewett DT, Ernst CM, Murchie SL, Vilas F (2018) Mercury’s Hollows. Cambridge University Press, Cambridge
Bonfanti M, Martinazzo R (2016) Classical and quantum dynamics at surfaces: basic concepts from simple models. Int J Quant Chem 116(21):1575–1602
Bowker M (2016) The role of precursor states in adsorption, surface reactions and catalysis. Top Catal 59:663
Burger MH, Killen RM, Vervack RJ, Bradley ET, McClintock WE, Sarantos M, Benna M, Mouawad N (2010) Monte Carlo modeling of sodium in Mercury’s exosphere during the first two MESSENGER flybys. Icarus 209:63
Byrne PK (2014) Mercury’s global contraction much greater than earlier estimates. Nat Geosci 7(4):301
Cadenhead DA, Stetter JR (1974) The interaction of water vapor with a lunar soil, a compacted soil, and a cinder-like rock fragment. In: Fifth Lunar Conference
Carrier WD, Olhoeft GR, Mendell W (1991) Physical properties of the lunar surface. In: Lunar Sourcebook, edited, pp 475–594
Cassidy TA, Johnson RE (2005) Monte Carlo model of sputtering and other ejection processes within a regolith. Icarus 176(2):499–507
Cassidy TA, McClintock WE, Killen RM, Sarantos M, Merkel AW, Vervack RJ Jr, Burger MH (2016) A cold-pole enhancement in Mercury’s sodium exosphere. Geophys Res Lett 43(21):11
Colaprete A et al. (2010) Detection of water in the LCROSS ejecta plume. Science 330:463
Colaprete A, Sarantos M, Wooden DH, Stubbs TJ, Cook AM, Shirley M (2016) How surface composition and meteoroid impacts mediate sodium and potassium in the lunar exosphere. Science 351(6270):249
Comsa G (1968) Angular distribution of scattered and desorbed atoms from specular surfaces. J Chem Phys 48(7):3235
Cremonese G et al. (2020) SIMBIO-SYS: scientific cameras and spectrometer for the BepiColombo mission. Space Sci Rev 216(5):75
de Leeuw NH, Parker SC, Catlow CRA, Price GD (2000) Modelling the effect of water on the surface structure and stability of forsterite. Phys Chem Miner 27:332
DeBoer JH (1968) The dynamical character of adsorption. Soil Sci 76(2):166
Donaldson Hanna KL, Greenhagen BT, Patterson WR III, Pieters CM, Mustard J, Bowles N, Paige DA, Glotch T, Thompson C (2016) Effects of varying environmental conditions on emissivity spectra of bulk lunar soils: application to diviner thermal infrared observations of the Moon. Icarus 283:326
Fan G, Manson JR (2010) Calculations of the energy accommodation coefficient for gas-surface interactions. Chem Phys 370:175
Feldman WC, Maurice S, Lawrence DJ et al. (2001) Evidence for water ice near the lunar poles. J Geophys Res, Planets 106(E10):23231
Feres R, Yablonsky G (2004) Knudsen’s cosine law and random billiards. Chem Eng Sci 59(7):1541
Galluzzi V et al. (2019) Structural analysis of the Victoria quadrangle fault systems on Mercury: timing, geometries, kinematics, and relationship with the high-Mg region. J Geophys Res, Planets 124(10):2543
Grava C, Chaufray JY, Retherford KD, Gladstone GR, Greathouse TK, Hurley DM, Hodges RR, Bayless AJ, Cook JC, Stern SA (2015) Lunar exospheric argon modeling. Icarus 255:135
Greenhagen BT, Lucey PG, Wyatt MB et al. (2010) Global silicate mineralogy of the Moon from the Diviner Lunar Radiometer. Science 329:1507
Grundy WM et al. (2016) The formation of Charon’s red poles from seasonally cold-trapped volatiles. Nature 539(7627):65–68. https://doi.org/10.1038/nature19340
Hale AS, Hapke B (2002) A time-dependent model of radiative and conductive thermal energy transport in planetary regoliths with applications to the Moon and Mercury. Icarus 156(2):318
Hanuš J, Delbo M, Durech J, Ali-Logoa V (2018) Thermophysical modeling of main-belt asteroids from WISE thermal data. Icarus 309:297
Hayne PO, Aharonson O (2015) Thermal stability of ice on Ceres with rough topography. Geophys Res Lett 120:1567
Hayne PO, Greenhagen BT, Foote MC, Siegler MA, Vasavada AR, Paige DA (2010) Diviner Lunar Radiometer observations of the LCROSS impact. Science 330:477
Hayne PO et al. (2017) Global regolith thermophysical properties of the Moon from the Diviner Lunar Radiometer Experiment. J Geophys Res, Planets 122:2371
Haynes DR, Tro NJ, George SM (1992) Condensation and evaporation of H2O on ice surfaces. J Phys Chem 96:8502
Heiken GH, Vaniman DT, French BM (1991) Lunar Sourcebook: A User’s Guide to the Moon. Cambridge University Press, Cambridge
Henderson BG, Jakosky BM (1994) Near-surface thermal gradients and their effects on mid-infrared emission spectra of planetary surfaces. J Geophys Res 99(E9):19063
Henderson BG, Jakosky BM (1997) Near-surface thermal gradients and mid-IR emission spectra: a new model including scattering and application to real data. J Geophys Res 102:6567
Henderson BG, Lucey PG, Jakosky BM (1996) New laboratory measurements of mid-IR emission spectra of simulated planetary surfaces. J Geophys Res 101:14969
Hendrix AR, Hurley DM, Farrell WM, Greenhagen BT, Hayne PO, Retherford KD et al. (2019) Diurnally migrating lunar water: evidence from ultraviolet data. Geophys Res Lett 46:2417
Hibbitts CA, Grieves GA, Poston MJ, Dyar MD, Alexandrov AB, Johnson MA, Orlando TM (2011) Thermal stability of water and hydroxyl on the surface of the Moon from temperature-programmed desorption measurements of lunar analog materials. Icarus 213(1):64
Hiesinger H, Helbert J (2010) The Mercury Radiometer and Thermal Infrared Spectrometer (MERTIS) for the BepiColombo mission. Planet Space Sci 58:144
Hodges RR (1975) Formation of the lunar atmosphere. Moon 14(1):139
Hodges RR (1980) Lunar cold traps and their influence on argon-40. In: Lunar and Planetary Science Conference
Hodges RR (2016) Methane in the lunar exosphere: implications for solar wind carbon escape. Geophys Res Lett 43(13):6742
Hodges RR (2018) Semiannual oscillation of the lunar exosphere: implications for water and polar ice. Geophys Res Lett 45(15):7409
Hodges RR, Johnson FS (1968) Lateral transport in planetary exospheres. J Geophys Res 73(23):7307
Hodges RR, Mahaffy PR (2016) Synodic and semiannual oscillations of argon-40 in the lunar exosphere. Geophys Res Lett 43(1):22
Hoffman JH, Hodges RR Jr, Johnson FS, Evans DE (1973) Lunar atmospheric composition results from Apollo 17. In: Lunar and Planetary Science Conference
Honniball CI, Lucey PG, Li S, Shenoy S, Orlando TM, Hibbitts CA, Hurley DM, Farrell WM (2021) Molecular water detected on the sunlit Moon by SOFIA. Nat Astron 5(2):121–127. https://doi.org/10.1038/s41550-020-01222-x
Ibach H (2006) Physics of Surfaces and Interfaces. Springer, Berlin
Jones WP, Watkins JR, Calvert TA (1975) Temperatures and thermophysical properties of the lunar outermost layer. Moon 13(4):475
Jones BM, Aleksandrov A, Dyar MD, Hibbitts CA, Orlando TM (2020) Investigation of water interactions with Apollo lunar regolith grains. J Geophys Res, Planets 125(6):e2019JE006147
Kegerreis JA, Eke VR, Massey RJ, Beaumont SK, Elphic RC, Teodoro LF (2017) Evidence for a localized source of the argon in the lunar exosphere. J Geophys Res, Planets 122(10):2163
Killen RM (2002) Source and maintenance of the argon atmospheres of Mercury and the Moon. Meteorit Planet Sci 37(9):1223
Killen RM, Sarantos M, Potter AE, Reiff P (2004) Source rates and ion recycling rates for Na and K in Mercury’s atmosphere. Icarus 171(1):1
Killen RM et al. (2007) Processes that promote and deplete the exosphere of Mercury. Space Sci Rev 132(2):433–509. https://doi.org/10.1007/s11214-007-9232-0
Killen RM, Burger MH, Farrell WM (2018) Exospheric escape: a parametrical study. Adv Space Res 62(8):2364
King DA, Wells M (1974) Reaction mechanism in chemisorption kinetics: nitrogen on the {100} plane of tungsten. Proc R Soc Lond Ser A, Math Phys Sci 339(1617):245–269
Kisliuk P (1957) The sticking probabilities of gases chemisorbed on the surfaces of solids. J Phys Chem Solids 3(1):95
Knudsen M (1909) Die Gesetze der Molekularstromung und der inneren Reibungsstromung der Gase durch Rohren. Ann Phys 28:75
Kolasinski KW (2012) Surface Science: Foundations of Catalysis and Nanoscience. Wiley, New York
Langmuir I (1918) The adsorption of gases on plane surfaces of glass, mica, and platinum. J Am Chem Soc 40(9):1361–1403. https://doi.org/10.1021/ja02242a004
Langseth MG, Keihm SJ, Peters K (1976) Revised lunar heat-flow values. In: 7th Lunar Sci. Conf.
Leblanc F, Johnson RE (2003) Mercury’s sodium exosphere. Icarus 164(2):261
Leblanc F, Johnson RE (2010) Mercury exosphere I. Global circulation model of its sodium component. Icarus 209(2):280
Li S, Milliken RE (2017) Water on the surface of the Moon as seen by the Moon Mineralogy Mapper: distribution, abundance, and origins. Sci Adv 3:e1701471
Logan LM, Hunt GR (1970) Emission spectra of particulate silicates under simulated lunar conditions. J Geophys Res 75:6539
Logan LM, Hunt GR, Salisbury JW et al. (1973) Compositional implications of Christiansen frequency maximums for infrared remote sensing applications. J Geophys Res 78:4983
Lucchetti A et al. (2018) Mercury hollows as remnants of original bedrock materials and devolatilization processes: a spectral clustering and geomorphological analysis. J Geophys Res, Planets 123(9):2365
Mangano V, Massetti S, Milillo A, Mura A, Orsini S, Leblanc F (2013) Dynamical evolution of sodium anisotropies in the exosphere of Mercury. Planet Space Sci 82–83:10
McGrath MA, Johnson RE, Lanzerotti LJ (1986) Sputtering of sodium on the planet Mercury. Nature 323(6090):694–696. https://doi.org/10.1038/323694a0
Mellon MT, Jakosky BM (1993) Geographic variations in the thermal and diffusive stability of ground ice on Mars. J Geophys Res 98(E2):3345
Merkel AW, Vervack RJ, Killen RM, Cassidy TA, McClintock WE, Nittler LR, Burger MH (2018) Evidence connecting Mercury’s magnesium exosphere to its magnesium-rich surface terrane. Geophys Res Lett 45(14):6790
Milillo A et al. (2020) Exospheric Na distributions along the Mercury orbit with the THEMIS telescope. In: 14th Europlanet Science Congress
Millán L, Thomas I, Bowles N (2011) Lunar regolith thermal gradients and emission spectra: modeling and validation. J Geophys Res 116(E12):E12003
Morrison SR (2013) The Chemical Physics of Surfaces. Springer, Berlin
Morrissey LS, Tucker OJ, Killen RM, Nakhla S, Savin DW (2022) Solar wind ion sputtering of sodium from silicates using molecular dynamics calculations of surface binding energies. Astrophys J Lett 925(1):L6. https://doi.org/10.3847/2041-8213/ac42d8
Mura A, Wurz P, Lichtenegger HIM, Schleicher H, Lammer H, Delcourt D, Milillo A, Orsini S, Massetti S, Khodachenko ML (2009) The sodium exosphere of Mercury: comparison between observations during Mercury’s transit and model results. Icarus 200(1):1
Narayanaswamy N, Ward CA (2020) Area occupied by a water molecule adsorbed on silica at 298 K: zeta adsorption isotherm approach. J Phys Chem C 124(17):9269
Neumann GA et al. (2013) Bright and dark polar deposits on Mercury: evidence for surface volatiles. Science 339(6117):296
Nittler LR, Frank EA, Weider SZ, Crapster-Pregont E, Vorburger A, Starr RD, Solomon SC (2016) Global major-element maps of Mercury updated from four years of Messenger X-ray observations. In: 47th Lunar and Planetary Science Conference, edited, The Woodlands, Texas, p 1237
Nittler LR, Chabot NL, Grove TL, Peplowski PN (2018) The chemical composition of Mercury. In: Solomon LNS, Anderson B (eds) Mercury: The View After MESSENGER. Cambridge University Press, Cambridge, p 30
Orsini S et al. (2021) SERENA: particle instrument suite for determining the Sun-Mercury interaction from BepiColombo. Space Sci Rev 217(1):11. https://doi.org/10.1007/s11214-020-00787-3
Paige DA et al. (2010) Diviner Lunar Radiometer observations of cold traps in the Moon’s south polar region. Science 330(6003):479
Paige DA, Siegler MA, Harmon JK, Neumann GA, Mazarico EM, Smith DE, Zuber MT, Harju E, Delitsky ML, Solomon SC (2013) Thermal stability of volatiles in the north polar region of Mercury. Science 339:300
Pajola M et al. (2021) Lermontov crater on Mercury: geology, morphology and spectral properties of the coexisting hollows and pyroclastic deposits. Planet Space Sci 195:105136
Persad AH, Ward CA (2016) Expressions for the evaporation and condensation coefficients in the Hertz-Knudsen relation. Chem Rev 116(14):7727
Platz T et al. (2016) Surface water-ice deposits in the northern shadowed regions of Ceres. Nat Astron 1(1):0007. https://doi.org/10.1038/s41550-016-0007
Poston MJ, Grieves GA, Aleksandrov AB, Hibbitts CA, Darby Dyar M, Orlando TM (2013) Water interactions with micronized lunar surrogates JSC-1A and albite under ultra-high vacuum with application to lunar observations. J Geophys Res, Planets 118(1):105
Poston MJ, Grieves GA, Aleksandrov AB, Hibbitts CA, Dyar MD, Orlando TM (2015) Temperature programmed desorption studies of water interactions with Apollo lunar samples 12001 and 72501. Icarus 255:24
Potter AE, Morgan T (1985) Discovery of sodium in the atmosphere of Mercury. Science 229(4714):651
Potter AE, Killen RM, Morgan TH (2002) The sodium tail of Mercury. Meteorit Planet Sci 37(9):1165
Potter AE, Killen RM, Reardon KP, Bida TA (2013) Observation of neutral sodium above Mercury during the transit of November 8, 2006. Icarus 226(1):172
Prem P, Goldstein DB, Varghese PL, Trafton LM (2018) The influence of surface roughness on volatile transport on the Moon. Icarus 299:31–45. https://doi.org/10.1016/j.icarus.2017.07.010
Reiss P, Warren T, Sefton-Nash E, Trautner R (2021) Dynamics of subsurface migration of water on the Moon. J Geophys Res, Planets 126:e2020JE006742
Rosborough SA et al. (2019) High-resolution potassium observations of the lunar exosphere. Geophys Res Lett 46(12):6964
Sack NJ, Baragiola RA (1993) Sublimation of vapor-deposited water ice below 170 K, and its dependence on growth conditions. Phys Rev B, Condens Matter 48(14):9973–9978
Sarantos M, Tsavachidis S (2020) The boundary of alkali surface boundary exospheres of Mercury and the Moon. Geophys Res Lett 47:16
Sarantos M, Tsavachidis S (2021) Lags in desorption of lunar volatiles. Astrophys J Lett 919:L14
Sarantos M, Killen RM, Sharma AS, Slavin JA (2008) Influence of plasma ions on source rates for the lunar exosphere during passage through the Earth’s magnetosphere. Geophys Res Lett 35(4):L04105
Sarantos M, Killen RM, Sharma AS, Slavin JA (2010) Sources of sodium in the lunar exosphere: modeling using ground-based observations of sodium emission and spacecraft data of the plasma. Icarus 20(2):36
Schaible MJ, Sarantos M, Anzures BA, Parman SW, Orlando TM (2020) Photon-stimulated desorption of MgS as a potential source of sulfur in Mercury’s exosphere. J Geophys Res, Planets 125(8):e2020JE006479. https://doi.org/10.1029/2020JE006479
Schleicher H, Wiedemann G, Wöhl H, Berkefeld T, Soltau D (2004) Detection of neutral sodium above Mercury during the transit on 2003 May 7. Astron Astrophys 425:1119
Schorghofer N, Aharonson O (2014) The lunar thermal ice pump. Astrophys J 788:169
Schorghofer N, Taylor GJ (2007) Subsurface migration of H2O at lunar cold traps. J Geophys Res 112(E2):E02010
Schorghofer N, Williams J-P (2020) Mapping of ice storage processes on the Moon with time-dependent temperatures. Planet Sci J 1(3):54. https://doi.org/10.3847/psj/abb6ff
Schorghofer N, Mazarico E, Platz T, Preusker F, Schroder SE, Raymond CA, Russell CT (2016) The permanently shadowed regions of dwarf planet Ceres. Geophys Res Lett 43:6783
Schorghofer N, Lucey P, Williams J-P (2017) Theoretical time variability of mobile water on the Moon and its geographic pattern. Icarus 298:111–116. https://doi.org/10.1016/j.icarus.2017.01.029
Singh-Boparai S, Bowker M, King DA (1975) Crystallographic anisotropy in chemisorption: nitrogen on tungsten single crystal planes. Surf Sci 53(1):55–73
Sipkens TA, Daun KJ (2017) Using cube models to understand trends in thermal accommodation coefficients at high surface temperatures. Int J Heat Mass Transf 111:54
Smyth WH, Marconi ML (1995) Theoretical overview and modeling of the sodium and potassium atmospheres of Mercury. Astrophys J 441:839
Smyth WH, Marconi ML (2006) Europa’s atmosphere, gas tori, and magnetospheric implications. Icarus 181:510
Speedy RJ, Debenedetti PG, Smith RS, Huang C, Kay BD (1996) The evaporation rate, free energy, and entropy of amorphous water at 150 K. J Chem Phys 105(1):240
Sprague AL (1992) Mercury’s atmospheric bright spots and potassium variations a possible cause. J Geophys Res 97(E11):18257
Strom RG, Trask NJ, Guest JE (1975) Tectonism and volcanism on Mercury. J Geophys Res 80(17):2478
Tenishev V, Rubin M, Tucker OJ, Combi MR, Sarantos M (2013) Kinetic modeling of sodium in the lunar exosphere. Icarus 226(2):1538
Teolis BD, Waite JH (2016) Dione and Rhea seasonal exospheres revealed by Cassini CAPS and INMS. Icarus 272:277
Teolis BD, Raut U, Kammer JA, Gimar CJ, Howett CJA, Gladstone GR, Retherford KD (2022) Extreme exospheric dynamics at Charon: implications for the red spot. Geophys Res Lett 49(8):e2021GL097580. https://doi.org/10.1029/2021GL097580
Thomas GE (1974) Mercury: does its atmosphere contain water? Science 183(4130):1197
Thomas RJ, Rothery DA, Conway SJ, Anand M (2014) Hollows on Mercury: materials and mechanisms involved in their formation. Icarus 229:221
Tucker OJ, Farrell WM, Killen RM, Hurley DM (2019) Solar wind implantation into the lunar regolith: Monte Carlo simulations of H retention in a surface with defects and the H2 exosphere. J Geophys Res 124(2):278
Urey H (1952) The Planets, Their Origin and Development. Yale University Press, New Haven
Vasavada AR, Paige DA, Wood SE (1999) Near-surface temperatures on Mercury and the Moon and the stability of polar ice deposits. Icarus 141(2):179
Vasavada AR, Bandfield JL, Greenhagen BT, Hayne PO, Siegler MA, Williams JP, Paige DA (2012) Lunar equatorial surface temperatures and regolith properties from the Diviner Lunar Radiometer Experiment. J Geophys Res 117:E00H18
Vilas F, Chapman CR, Matthews MS (1988) Mercury. University of Arizona Press, Tucson
Watson K, Murray B, Brown H (1961a) On the possible presence of ice on the Moon. J Geophys Res 66(5):1598
Watson K, Murray BC, Brown H (1961b) The behavior of volatiles on the lunar surface. J Geophys Res 66(9):3033
Watters TR et al. (2016) Recent tectonic activity on Mercury revealed by small thrust fault scarps. Nat Geosci 9(10):743
Weider SZ et al. (2015) Evidence for geochemical terranes on Mercury: global mapping of major elements with MESSENGER’s X-Ray Spectrometer. Earth Planet Sci Lett 416:109
Williams JP, Paige DA, Greenhagen BT, Sefton-Nash E (2017) The global surface temperatures of the Moon as measured by the Diviner Lunar Radiometer Experiment. Icarus 283:300
Williams JP, Greenhagen BT, Paige DA, Schorghofer N, Sefton-Nash E, Hayne PO, Lucey M, Siegler A, Aye KM (2019) Seasonal polar temperatures on the Moon. J Geophys Res, Planets 124(10):2505
Wöhler C, Grumpe A, Berezhnoy AA, Shevchenko VV (2017) Time-of-day-dependent global distribution of lunar surficial water/hydroxyl. Sci Adv 3(9):e1701286. https://doi.org/10.1126/sciadv.1701286
Wurz P, Lammer H (2003) Monte-Carlo simulation of Mercury’s exosphere. Icarus 164(1):1
Wurz P et al. (2010) Self-consistent modelling of Mercury’s exosphere by sputtering, micro-meteorite impact and photon-stimulated desorption. Planet Space Sci 58(12):1599
Yakshinskiy BV, Madey TE, Ageev VN (2000) Thermal desorption of sodium atoms from thin SiO2 films. Surf Rev Lett 7(01n02):75
Zangwill A (1988) Physics at Surfaces. Cambridge University Press, Cambridge
Zhang JA, Paige DA (2009) Cold-trapped organic compounds at the poles of the Moon and Mercury: implications for origins. Geophys Res Lett 36(16):L16203
Zwanzig RW (1960) Collision of a gas atom with a cold surface. J Chem Phys 32(4):1173–1177
Acknowledgements
We are especially grateful to co-author Maria Teresa Capria, who passed away 15 April 2022. Her decades long career in planetary science were an inspiration to the team and the community, and her expertise in planetary surface thermo-physics were essential to this work.
Funding
Open access funding provided by Istituto Nazionale di Astrofisica within the CRUI-CARE Agreement. BT and CG were supported by LRO/LAMP NASA contract NNG05EC87C. NS was supported by SSERVI cooperative agreement NNH16ZDA001N (TREX). PP was supported by NASA through SSERVI/ICE Five-O (80NSSC20M0027) and LRO/Diviner.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Competing Interests
The authors declare no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Surface-Bounded Exospheres and Interactions in the Inner Solar System
Edited by Anna Milillo, Menelaos Sarantos, Benjamin D. Teolis, Go Murakami, Peter Wurz and Rudolf von Steiger
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Teolis, B., Sarantos, M., Schorghofer, N. et al. Surface Exospheric Interactions. Space Sci Rev 219, 4 (2023). https://doi.org/10.1007/s11214-023-00951-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11214-023-00951-5