Abstract
Osteoporosis is the most prevalent skeletal disorder, a condition that is associated with significant social and healthcare burden. In the elderly, osteoporosis is commonly associated with sarcopenia, further increasing the risk of fracture. Several imaging techniques are available for a non-invasive evaluation of osteoporosis and sarcopenia. This review focuses on dual-energy X-ray absorptiometry (DXA), as this technique offers the possibility to evaluate bone mineral density and body composition parameters with good precision and accuracy. DXA is also able to evaluate the amount of aortic calcification for cardiovascular risk estimation. Additionally, new DXA-based parameters have been developed in recent years to further refine fracture risk estimation, such as the Trabecular Bone Score and the Bone Strain Index. Finally, we describe the recent advances of a newly developed ultrasound-based technology known as Radiofrequency Echographic Multi-Spectrometry, which represent the latest non-ionizing approach for osteoporosis evaluation at central sites.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Osteoporosis is the most prevalent skeletal disorder, a condition that is associated with significant social and healthcare burden. This disease is defined by a combination of reduced bone mass and microarchitecture deterioration, leading to increased risk of fragility fracture typically occurring at the spine, femur, and distal radius. In the elderly, osteoporosis is commonly associated with sarcopenia, which represents a progressive and age-related loss of muscle mass; the combination of both diseases is now recognized as osteosarcopenia, further increasing the risk of fracture.
Several imaging techniques are available for a non-invasive evaluation of bone and body composition to diagnose osteoporosis and sarcopenia. This review specifically focuses on dual-energy X-ray absorptiometry (DXA), as this technique offers the possibility to evaluate bone mineral density (BMD) and body composition parameters with good precision and accuracy. DXA is also able, in the lateral acquisition, to estimate the amount of aortic calcification for cardiovascular risk estimation. Additionally, new DXA-based parameters have been developed in recent years to further refine fracture risk estimation, such as the Trabecular Bone Score (TBS) and the Bone Strain Index (BSI). This article is aimed at revising the current evidence available for the use of DXA in this scenario, providing radiologists with up-to-date information on newer diagnostic possibilities offered by this technique.
This article also presents a newly developed ultrasound-based technology known as Radiofrequency Echographic Multi-Spectrometry (REMS), which represents the latest non-ionizing approach for osteoporosis evaluation at central sites. REMS technology is able to analyze the raw unfiltered ultrasound signal acquired at lumbar spine and proximal femur, obtaining BMD ultrasound values that showed to be very accurate compared to DXA.
DXA-based Trabecular Bone Score
BMD assessed by DXA is the main criterion for the diagnosis of osteoporosis and for the prediction of fragility fracture risk: BMD measures bone quantity and is therefore strongly related to bone resistance [1].
However, many subjects with fragility fractures show slightly low or even normal BMD values. This is because other skeletal features such as bone microarchitecture, bone remodeling, and bone geometry contribute to bone quality and influence fracture risk [2].
To better assess bone quality, other imaging techniques have been employed, such as quantitative computed tomography (QCT), high-resolution peripheral QCT (HRpQCT), and high-resolution magnetic resonance imaging (MRI). However, these technologies have higher costs, lower availability, and higher ionizing radiation dose (for QCT) compared to DXA [3]. Therefore, alternative DXA-based parameters have been developed over time to refine fracture risk prediction and investigate skeletal features other than BMD.
The Trabecular Bone Score (TBS), introduced in early 2010, is a DXA-based textural index that evaluates gray-level variations of each pixel of a DXA image: These variations depend on the specific X-ray absorption properties of the corresponding 3D tissue, thus reflecting the tissue microarchitecture. In this way, TBS can provide a valid indirect estimation of lumbar trabecular microarchitecture, even if a direct measurement is not feasible (due to technical limitations related to pixel width of DXA image, which is about four time larger the mean size of trabeculae) [4]. TBS is calculated by a specific software (TBS iNsight; Medimaps, Plan-les-Ouates, Switzerland) on the lumbar spine DXA image, in the same region of interest used for BMD measurement [5]. High TBS values correspond to a dense trabecular structure and thus a good microarchitecture; on the contrary, a degraded bone microarchitecture matches low TBS values [6].
A large meta-analysis developed threshold values: TBS > 1.310 is considered normal and corresponds to a normal bone microarchitecture and a low fracture risk; TBS values between 1.23–1-31 identify a partially degraded microarchitecture; TBS < 1.230 corresponds to degraded microarchitecture and a higher risk of fractures, in both men and women [7]. An example of three different TBS reports showing normal, partially degraded, and degraded microarchitecture is shown in Fig. 1.
In 2015, the International Society for Clinical Densitometry (ISCD) TBS task force published a position paper to develop official positions on the incorporation of TBS in clinical practice [5]. The paper highlights that low TBS values are associated with an increase in both prevalent and incident fragility fractures. In particular, the use of TBS is recommended for the assessment of vertebral, hip, and major osteoporotic fracture risk in postmenopausal women and for hip fracture risk in men older than 50 years [5]. TBS also demonstrated to predict fracture risk independently of DXA-BMD and clinical risk factors. Therefore, TBS was incorporated into the FRAX® tool to adjust 10-year fracture probability [5, 7].
A limitation of TBS is that its application is currently not advised for monitoring patients under antiosteoporotic treatment [8]. This is explained by the fact that TBS has a slightly lower precision compared to BMD, leading to higher least significant values (LSC) and consequently longer interval to detect changes over time [5, 9].
A technical issue which has characterized TBS software from the beginning was the underestimation of TBS value due to the individual’s regional soft tissue thickness. Consequently, TBS showed a negative correlation with BMI, as opposed to BMD and biomechanical properties of the bone. An updated version of TBS algorithm (TBSv4.0) uses a compensation for the thickness of the lumbar soft tissue to overcome this issue and demonstrated a positive correlation of TBS values with BMI [10].
Regarding new applications, a beta version of TBS software was recently developed for the evaluation of the hip (TBS-Hip—v1.0, Medimaps group, Geneva, Switzerland). A recent study conducted on women of 65 years or older who were residents of long-term care facilities tried to evaluate the performance of this new algorithm. The study showed a moderate correlation between BMD and TBS-Hip results at total hip, femoral neck, and greater trochanter, suggesting that TBS-Hip can potentially provide information on bone architecture of the hip, as already demonstrated for the spine [11].
DXA-based Bone Strain Index
As above mentioned, TBS well predicts fracture risk by reflecting the microarchitecture of the bone. However, it is not able to evaluate bone strength or fatigue, two parameters that impact on the bone resistance to loads.
In this scenario, another DXA-derived index called Bone Strain Index (BSI) was introduced in 2019, with the aim of further exploring bone quality features. BSI provides information about bone strength and resistance to loads, which were not assessed from existing indices [12].
This index is based on the application to DXA images of a mathematical model defined as finite element analysis (FEA). FEA model relies on the principle that a complex object can be analyzed by transforming it into many simpler and smaller elements (i.e., “finite elements”) that can easily be managed to simulate any specific phenomenon [13].
The finite element analysis of the lumbar or femur DXA scan is automatically performed by BSI software (Tecnologie Avanzate s.r.l., Torino, Italy), starting from the division of the DXA area into small triangles, following the mapping contour of DXA image. Once the DXA image is divided in “finite elements” (the triangles), a FEA mathematical model is generated for both lumbar spine and proximal femur [14]. At the lumbar spine, the software simulates the gravitational force by applying a load to the upper vertebral plate, while a constraint is applied to the lower plate [15]. The magnitude of the load acting on the upper plate derives from a model which simulates forces in standing position, also depending on subject’s weight and height [16].
At the femur site, BSI algorithm tries to simulate a lateral fall, with a patient-specific impact force applied to the greater trochanter area and the constraints applied on the femoral head and the inferior part of the shaft [17].
The software generates a graphical representation of bone strain amount, allowing an easy identification of the areas characterized by higher strain concentration. Thus, the mean BSI value reflects the average bone equivalent strain, with higher BSI values corresponding to higher strain level and therefore to higher fracture risk. On the other hand, lower BSI values are indicative of a bone less subjected to strain, thereby at lower risk of fracture.
BSI threshold values for the Caucasian population have been proposed in a study on postmenopausal Italian women: BSI ≤ 1.7 corresponds to normality; BSI between 1.7 and 2.5 reflects a low resistance to strain; BSI > 2.5 is related to poor resistance to strain [18]. Figure 2 shows some examples of different BSI diagnoses at lumbar spine and femoral neck.
Given its recent introduction, literature on BSI is rapidly growing and clinical studies have showed BSI usefulness in both primary and secondary osteoporosis. In osteoporotic patients, BSI values were found to be positively correlated with an increase of risk of fragility fractures at the lumbar spine and the hip in postmenopausal women, regardless of FRAX® [19]. Moreover, studies investigated the capability to predict the occurrence of fragility re-fracture, showing that BSI is an accurate predictive index of re-fracture [20, 21].
Regarding secondary osteoporosis, BSI can be useful in recognizing subjects at high risk for fragility fractures among patients with primary hyperparathyroidism [22, 23]. Lastly, BSI showed its usefulness even among young patients with neurofibromatosis type I (NF1), with higher BSI values in pubertal patients in comparison with prepubertal ones, implying a decrease in bone resistance to loads in older pediatric patients with NF1 [24].
In terms of monitoring antiosteoporotic treatment, few data are available in the literature. One recent study demonstrated that anabolic therapy with teriparatide seems to improve BSI, suggesting an increase of bone strength as a teriparatide effect [25].
REMS
In recent years, a new ultrasound-based non-ionizing technique for the evaluation of BMD, bone fragility, and fracture risk has been introduced in clinical practice. This technique is called Radiofrequency Echographic Multi-Spectrometry (REMS) and is based on the spectral analysis of the whole raw unfiltered ultrasound signals (also called radiofrequency (RF) ultrasound signals) that are reflected from the bony surface. Conversely from traditional ultrasound techniques in bone densitometry, typically applied to peripheral sites (such as the calcaneus), REMS can be applied to central sites such as the lumbar spine and the femoral neck [26, 27].
What is new in the REMS technology is that the whole spectrum of information from the reflected “raw” unfiltered ultrasound wave is used to obtain information from bone, differently from conventional ultrasound devices, which use a limited part of the reflected wave to produce the B-mode image. REMS technology acquires and analyzes the whole RF, extracting a specific RF spectrum from the given sonographic bony layer, being able to identify and analyze the cortical and trabecular part of the bone [28]. More in detail, the REMS scan is acquired by placing the ultrasound probe on the specific anatomical site (abdomen for the lumbar spine or hip for the femoral neck). The operator is asked to adjust the scan depth in order to identify and properly visualize the vertebral or femoral cortical bone interface. After adjusting the transducer focus immediately above the cortical bone, REMS software is capable to automatically detect the region of interests (ROIs) at each site. See Fig. 3 for a schematic example of REMS acquisition working principle at femoral neck. The acquisition of the RF signal sets the basis for the following calculations that allow for the quantitative evaluation of BMD. For each sonographic line, a corresponding spectrum of radiofrequency is obtained, allowing at the same time to identify ROIs from trabecular bone and exclude bone signal artifacts (such as those originating from osteophytes) thanks to the software ability to identify abnormal spectral characteristics. A final trabecular patient-specific spectrum is generated, which is then automatically compared by the software to reference models for normal and osteoporotic bones, matched by gender, age, and BMI [29]. The whole procedure allows for the calculation of the percentage of analyzed spectra that were classified as “osteoporotic,” which is called the “osteoporotic score.” This score is therefore transformed by linear equations into ultrasound BMD values (US-BMD), which are expressed as g/cm2, and enables the generation of T-score and Z-score values by quantitative comparisons with the NHANES reference curves [26, 27]. A typical REMS report is provided in Fig. 4.
Several studies were performed to clinically validate the REMS technique. In 2019, a multicenter study performed in Italy by Di Paola et al. evaluated the REMS precision and accuracy on a large population of 1914 postmenopausal women enrolled in six clinical centers [30]. REMS accuracy was assessed by comparing US-BMD results with BMD by DXA, the reference technique in clinical practice. Regarding the intraoperator precision (two consecutive acquisitions, same patient, same operator), a root-mean-square coefficient of variation (RMS-CV) of 0.38% was found at lumbar spine, while 0.32% was found at femoral neck. Regarding the inter-operator repeatability (a third REMS scan on the same patient, performed by a second operator), RMS-CV values of 0.54% and 0.48% were reported for lumbar spine and femoral neck, respectively [30]. A very recent study from Messina et al. in 2023 confirmed these optimal values of intraoperator precision (RMS-CV: 0.47% for lumbar spine, 0.32% for femoral neck), as well as those related to the inter-operator repeatability (0.55% for lumbar spine, 0.51% for femoral neck) [31]. Such values are generally superior to those of DXA, as the precision of this technique has been reported to range between 0.91 to 1.92% at the spine and 1.5 to 2.25% at the femoral neck [32, 33].
Diagnostic accuracy of REMS was mainly assessed by comparing it to DXA and determining the concordance between these two techniques. The Italian multicenter study by Di Paola et al. estimated the concordance between REMS and DXA by calculating the Cohen’s kappa (k), reporting a good discrimination capability between osteopenic, normal, and osteoporotic subjects with k = 0.82 (lumbar spine) and k = 0.79 (femoral neck) [30]. Additional analysis showed that the sensitivity of REMS technique in differentiating osteoporotic from non-osteoporotic (osteopenic and healthy) subjects was 91.7% at the spine and 91.5% at the femur, with a corresponding specificity of 92.0% and 91.8%, respectively. Authors also evaluated the degree of correlation between the two techniques, reporting very high values with r = 0.94 for the spine and r = 0.93 for the femoral neck, both values being statistically significant [30].
In 2021, a wider European multicenter study was conducted in five clinical centers to evaluate the diagnostic accuracy of REMS technique compared to DXA for femoral neck and lumbar spine [34]. The study involved 4307 female Caucasian subjects, and the comparison in terms of diagnostic classification of patients with/without osteoporosis showed a sensitivity of 90.4% and a specificity of 95.5% at femoral neck, while the diagnostic accuracy yielded a sensitivity of 90.9% with a specificity of 95.1% at lumbar spine [34]. Such results indicated a very good sensitivity and specificity for REMS in identifying osteoporotic patient in terms of agreement with DXA.
An interesting aspect is the possibility of REMS technology to overcome those artifacts commonly encountered (osteoarthrosis, vertebral fractures) that typically overestimate BMD values at DXA. Caffarelli et al. showed that in subjects with spinal osteoarthritis, REMS was able to identify a greater number of subjects as “osteoporotic” compared with DXA (35.1% vs 9.3%, respectively) [35]. Further studies will better clarify this ability, possibly by comparing REMS values with those of other techniques such as quantitative CT.
The use or REMS has been explored with promising results in several conditions leading to secondary osteoporosis, such as in young women with anorexia nervosa [36] or in elderly subjects with type 2 diabetes mellitus [37], as well as conditions in which DXA assessment is not feasible such as in healthy pregnant women [38].
A recent development of REMS is the Fragility Score. This score (adimensional value between 0 and 100) is obtained by comparing the patient’s spectrum with reference models of fractured and not fractured subjects and is an indicator of bone quality independent of BMD: Lower values are associated with a good quality of examined bone and vice versa. Data about FS are growing, with the results obtained from an up to 5-year longitudinal study by Pisani et al. showing how lumbar spine and femoral FS are able to discriminate between fractured and non-fractured subjects with higher performance with respect to T-scores values measured by both DXA and REMS [29]. Promising results for FS have also been reported in differentiating between subjects with primary and disuse-related osteoporosis [39].
Regarding some limitations related to REMS, of course there may be variability in its performance across different patient populations or clinical settings [40]. Of course, other limitations may arise from those conditions that usually limit the usefulness of ultrasound (obesity, operator's skills, or other conditions that may create an obstacle to ultrasound beam such as air); nevertheless, the technique is capable to get proper measurements even from small portions of the examined vertebra; therefore, a diagnostic value is obtained even in the presence of obstacle to full vertebra visualization. In any case, fasting is suggested before the exam as for any other abdominal ultrasound scan. Regarding operator’s skills, the very good inter-operator reproducibility suggests that, after proper machine training, REMS it is little affected.
Lastly, the accuracy of REMS was compared only with DXA, which represents the gold standard. Further studies are comparing REMS accuracy with that of more complex techniques such as QCT.
Body composition analysis using DXA
The study of body composition has been receiving increasing attention from the scientific community in recent years, becoming a trending topic in medicine. Body composition analysis refers to the description and quantification of the different components that constitute the human body [41]. Body composition analysis can be applied to the assessment of physiological and paraphysiological conditions like aging or adaptation to training in athletes, but also to the evaluation of a myriad of diseases such as obesity, diabetes mellitus, cancer, and sarcopenia [42,43,44].
Several imaging and non-imaging techniques are indeed available for body composition analysis, with variable characteristics (see Table 1). Non-imaging techniques include anthropometry and bioimpedance analysis (BIA). Imaging methods include DXA, CT, MRI, and US [45]. At present, DXA is the most frequent radiologic technique used to evaluate body composition, being accurate, widely available, and associated with a very low radiation dose [46].
DXA employs two X-ray beams of different energy. The attenuation of X-ray beams through the body depends on the density and thickness of human tissues but also on the energy of photons. DXA thus measures the R-value, which is the ratio of the attenuation coefficients at the two different photon energy levels. The R-value is specific to each tissue. It is constant for bone and fat in all individuals, while showing inter-individual variability for soft tissue, depending on its composition. A higher fat percentage corresponds to a lower R-value [47]. DXA is based on a three-compartmental model, comprising fat mass (FM), non-bone lean mass (LM), and bone mineral content (BMC) [47]. Of note, DXA does not measure directly these three components. In pixels that contain bone, this technique distinguishes bone from soft tissue, including both FM and LM. In order to quantify separately LM and FM, DXA relies on pixels adjacent to bone that comprise only soft tissue [48]. In clinical practice, whole-body DXA is generally performed for the study of body composition. The effective dose for a whole-body scan is only 4–5 μSv with the newest generation of densitometers, meaning that DXA can be considered a low-dose technique for both patients and operators [49, 50].
Body composition parameters obtained by DXA are susceptible to error or variation due to technical and/or biological aspects [49]. To minimize biological variability, it is recommended to acquire the scan in standardized conditions, preferably with subjects at rest and euhydrated, after an overnight fast, with an empty bladder [51].
The report of a whole-body DXA scan for body composition analysis should include values of body mass index (BMI), bone mineral density (BMD), bone mineral content (BMC), total mass, total lean mass, total fat mass, and percent fat mass [45]. DXA also allows to quantify visceral adipose tissue (VAT) by the use of specific algorithms that are integrated in the newest software versions (CoreScan™, GE Healthcare or InnerCore™, Hologic) [49]. These algorithms employ geometric assumptions to subtract the mass of the subcutaneous adipose tissue (SAT) layer from the total fat mass in the android region, as the width of the SAT layer can be estimated along the lateral borders of the abdomen [52]. In addition, DXA enables to obtain several body composition indices, such as android/gynoid (AG) ratio, fat mass index (FMI = fat mass/height squared), lean mass index (LMI = lean mass/height squared), appendicular lean mass index (ALMI = appendicular lean mass/height squared; also called appendicular skeletal muscle index or ASMI), and lipodystrophy indices (trunk to leg fat mass ratio and trunk to leg percent fat) [45]. These indices can be easily computed by inserting anthropometric parameters like weight and height in the system, and by defining a number of standard regions of interest (ROI) during the analysis of the DXA scan, including the trunk, arm, leg, android, and gynoid areas [47]. Their main problem is that the respective cutoff values are often variably defined in literature, with no universal consensus. However, adiposity indices can improve the stratification of cardiometabolic risk beyond BMI [53]. In addition, since BMI does not differentiate between lean mass and fat mass, the evaluation of obesity may benefit from the use of adiposity indices derived by DXA, including percent fat mass and FMI. By contrast, lean mass indices are now being employed for the assessment and diagnosis of sarcopenia [46]. The revised European consensus on definition and diagnosis of sarcopenia by the European Working Group on Sarcopenia in Older People (EWGSOP) supports the use of DXA to determine low muscle quantity and recommends specific cutoff points for appendicular skeletal mass (ASM) and ASMI; these are appendicular skeletal mass < 20 kg in men and < 15 kg in women and ASMI < 7 kg/m2 in men and < 5.5 kg/m2 in women [54]. Of note, these recommendations focus on the European population, but there may be relevant differences in body composition parameters depending on ethnicity, although this holds true more for adiposity indices [55]. Figure 5 shows three cases of total body DXA evaluating different conditions using body composition parameters (lean and adipose indices).
DXA has been compared with CT and MRI for the measurement of fat mass and skeletal mass. CT and MRI are generally considered the gold standard in body composition analysis, particularly at organ/tissue level [56]. While DXA may underestimate fat mass and overestimate lean mass as compared, respectively, to CT/MRI-measured adipose tissue and skeletal muscle mass, since it considers chemical compartments (= FM as lipids and LM as water, proteins, carbohydrates, and other soft tissue components including minerals) rather than actual anatomical compartments [46], DXA-derived parameters seem to correlate well with CT- and MRI-derived measurements [57].
It is worth underlining that DXA can provide simultaneous information on soft tissues and bone mineral density/content. This is relevant in the diagnosis of an emerging geriatric syndrome associated with adverse outcomes known as osteosarcopenia, which typically requires the presence of both osteopenia/osteoporosis and sarcopenia [58]. Of note, osteosarcopenia does not have a dedicated diagnostic model, which rather stems from those of its two respective components. Therefore, its definition is not completely standardized: While some published studies include only osteoporosis as part of osteosarcopenia, others also include osteopenia; in addition, several diagnostic criteria can be used for sarcopenia [59]. Osteopenia/osteoporosis are diagnosed based on WHO criteria which rely on the T-score derived from DXA-measured aBMD [60]. According to the EWGSPO2 algorithm [54], which is widely accepted in Europe, confirmed sarcopenia instead requires the presence of low muscle strength together with low muscle quality or quantity; the latter can be identified via low ASM or ASMI determined through DXA. DXA is unique in its ability of addressing both components of the osteosarcopenic syndrome.
To sum up, despite having some limitations, DXA appears to be an excellent option for the evaluation of body composition in clinical practice, given its low dose, wide availability, limited cost, and good precision and accuracy. A whole-body DXA scan provides a considerable amount of information with major clinical relevance. However, further research is needed to optimize cutoff points for fat mass and lean mass indices.
Abdominal aortic calcification assessment using DXA
Abdominal aortic calcification (AAC) is a common pathologic condition leading to the formation of calcific deposits in the wall of the abdominal aorta. The prevalence of AAC increases with advancing age, reaching 100% in men and women over age 75 [61]. AAC is associated with conventional cardiovascular risk factors such as hypertension, smoking, dyslipidemia, hyperglycemia, and overweight/obesity [62]. On the other hand, AAC is now recognized as an independent predictor of cardiovascular disease and mortality [63], in terms of coronary heart disease and myocardial infarction [64] as well as stroke and intermittent claudication [65]. Therefore, detection of AAC, together with assessment of its extent and severity, may improve the stratification of cardiovascular risk in the general population, which could eventually translate into optimized clinical management and prevention of cardiovascular events [66]. In addition, an independent association of AAC with decreased bone mineral density (BMD) and increased fracture risk has been reported by multiple studies [67, 68] and confirmed by a recent meta-analysis [69]. This suggests that the evaluation of AAC may simultaneously provide information on the risk of cardiovascular morbidity/mortality and bone loss.
AAC is detectable using different radiologic techniques, including lateral lumbar radiographs, lateral spine DXA, and CT [70]. DXA is commonly performed in middle-aged and elderly individuals for the diagnosis and follow-up of osteoporosis, typically via posteroanterior spine and hip scans. Although this is not routinely performed in current clinical practice, AAC can be correctly identified and scored on an additional lateral spine DXA image intended for vertebral fracture assessment (VFA), thanks to the improved spatial resolution of modern DXA devices [71, 72].
The severity of AAC can be graded using two validated scoring systems. The first scoring system—a 24-point semiquantitative method (also known as AAC-24)—considers calcifications in the abdominal aorta at the levels corresponding to L1–L4 vertebrae [73]. A score from 0 to 3 is attributed to calcific lesions in the anterior and posterior aortic walls in the eight segments, giving a maximum of 24 points, as shown in Table 2. A simplified 8-point semiquantitative method (also known as AAC-8) was proposed in 2006 [74]. This scoring system considers the aggregate length of calcification separately for the anterior and posterior aortic walls corresponding to L1–L4, as if the calcific deposits at different levels were stacked end to end. A score from 0 to 4 is attributed to the anterior and posterior aortic walls as shown in Table 2, for a maximum of 8 points. Both scoring systems can be applied to lateral lumbar radiographs as well as lateral spine DXA images obtained for VFA. A score ≥ 5 points for AAC-24 and ≥ 3 points for AAC-8 identifies patients at risk for cardiovascular disease [75, 76].
The performance of DXA in the detection and scoring of AAC has been evaluated in comparison with lateral lumbar radiographs and CT, which may be set as gold standards [77]. Findings from selected studies are summarized in Table 3. Overall, available evidence indicates a good correlation with radiographs and a moderate correlation with CT. An example of AAC estimation with the use of lateral DXA is shown in Fig. 6, together with a schematic representation of AAC-24 and AAC-8 scoring systems.
To conclude, lateral DXA images obtained for VFA allow detection and grading of AAC with acceptable sensitivity and specificity compared to lateral radiographs or CT, as well as good repeatability and reproducibility. Although lateral radiographs and CT/QCT show superior accuracy, DXA is a valuable option to assess AAC in clinical practice, in light of its low dose (≤ 0.005 mSv for a VFA scan [50]) and wide availability. Lateral DXA may be intended as a sort of screening tool for AAC detection in individuals who do not have manifestations of CVD [70]. Patients at risk of CVD according to the severity of AAC on lateral spine DXA images may benefit from a tighter control of cardiovascular risk factors, although no specific therapeutic interventions are currently available for AAC [64].
Conclusion
Osteoporosis and the consequent risk of fracture still have a high impact on healthcare systems and patients’ quality of life. New tools and diagnostic technique have been developed in recent years to further refine the fracture risk estimation.
DXA can be considered as a “multiparametric” technique, still representing the reference standard for assessing conditions such as sarcopenia and osteoporosis. The use of lateral DXA may allow not only the identification of vertebral fractures, but also allow the evaluation of aortic calcifications. Additional DXA-based software can also explore parameters that goes beyond BMD, such as the Trabecular Bone Score and the Bone Strain Index, providing indirect data about bone microarchitecture and bone strength, respectively.
At the same time, REMS technology emerged in the last years as a novel and accurate ultrasound-based tool to estimate BMD. Scientific evidence confirms that REMS has very good concordance with DXA, being a predictor of fracture risk in postmenopausal women. Literature about REMS is growing also in the context of other secondary osteoporosis conditions. Finally, the use of REMS Fragility Score offers a further parameter to assess skeletal fragility independently from BMD.
References
Kanis JA, Cooper C, Rizzoli R, Reginster JY (2019) European guidance for the diagnosis and management of osteoporosis in postmenopausal women. Osteoporos Int 30:3–44. https://doi.org/10.1007/s00198-018-4704-5
Miller PD, Siris ES, Barrett-Connor E et al (2002) Prediction of fracture risk in postmenopausal white women with peripheral bone densitometry: evidence from the national osteoporosis risk assessment. J Bone Miner Res 17:2222–2230. https://doi.org/10.1359/jbmr.2002.17.12.2222
Adams JE (2013) Advances in bone imaging for osteoporosis. Nat Rev Endocrinol 9:28–42. https://doi.org/10.1038/nrendo.2012.217
Hans D, Barthe N, Boutroy S et al (2011) Correlations between trabecular bone score, measured using anteroposterior dual-energy X-ray absorptiometry acquisition, and 3-dimensional parameters of bone microarchitecture: an experimental study on human cadaver vertebrae. J Clin Densitom 14:302–312. https://doi.org/10.1016/j.jocd.2011.05.005
Silva BC, Broy SB, Boutroy S et al (2015) Fracture risk prediction by non-BMD DXA measures: the 2015 ISCD official positions part 2: trabecular bone score. J Clin Densitom 18:309–330. https://doi.org/10.1016/j.jocd.2015.06.008
Bousson V, Bergot C, Sutter B et al (2012) Trabecular bone score (TBS): available knowledge, clinical relevance, and future prospects. Osteoporos Int 23:1489–1501. https://doi.org/10.1007/s00198-011-1824-6
McCloskey EV, Odén A, Harvey NC et al (2016) A meta-analysis of trabecular bone score in fracture risk prediction and its relationship to FRAX. J Bone Miner Res 31:940–948. https://doi.org/10.1002/jbmr.2734
Krohn K, Schwartz EN, Chung YS, Lewiecki EM (2019) Dual-energy X-ray absorptiometry monitoring with trabecular bone score: 2019 ISCD official position. J Clin Densitom 22:501–505
Bandirali M, Poloni A, Sconfienza LM et al (2015) Short-term precision assessment of trabecular bone score and bone mineral density using dual-energy X-ray absorptiometry with different scan modes: an in vivo study. Eur Radiol. https://doi.org/10.1007/s00330-015-3606-6
Shevroja E, Aubry-Rozier B, Hans G et al (2019) Clinical performance of the updated trabecular bone score (TBS) algorithm, which accounts for the soft tissue thickness: the Osteolaus study. J Bone Miner Res 34:2229–2237. https://doi.org/10.1002/jbmr.3851
Haeri NS, Perera S, Ferreiro I et al (2022) Trabecular bone score in the hip: a new method to examine hip bone microarchitecture-a feasibility study. Arch Osteoporos 17:126. https://doi.org/10.1007/s11657-022-01168-9
Ulivieri FM, Rinaudo L (2021) Beyond bone mineral density: a new dual X-ray absorptiometry index of bone strength to predict fragility fractures, the bone strain Index. Front Med (Lausanne) 7
Ulivieri FM, Rinaudo L (2022) The bone strain index: an innovative dual X-ray absorptiometry bone strength index and its helpfulness in clinical medicine. J Clin Med 11
Bazzocchi A, Isaac A, Dalili D et al (2022) Imaging of metabolic bone diseases: the spine view, part I. Semin Musculoskelet Radiol 26:478–490. https://doi.org/10.1055/s-0042-1754340
Colombo C, Libonati F, Rinaudo L et al (2019) A new finite element based parameter to predict bone fracture. PLoS ONE. https://doi.org/10.1371/journal.pone.0225905
Han KS, Rohlmann A, Zander T, Taylor WR (2013) Lumbar spinal loads vary with body height and weight. Med Eng Phys 35:969–977. https://doi.org/10.1016/j.medengphy.2012.09.009
Terzini M, Aldieri A, Rinaudo L et al (2019) Improving the hip fracture risk prediction through 2D finite element models from DXA images: validation against 3D models. Front Bioeng Biotechnol 7:220. https://doi.org/10.3389/fbioe.2019.00220
Ulivieri FM, Rinaudo L, Messina C et al (2022) Bone Strain Index: preliminary distributional characteristics in a population of women with normal bone mass, osteopenia and osteoporosis. Radiol Med 127:1151–1158. https://doi.org/10.1007/s11547-022-01543-z
Sornay-Rendu E, Duboeuf F, Ulivieri FM et al (2022) The bone strain index predicts fragility fractures. The OFELY study. Bone. https://doi.org/10.1016/j.bone.2022.116348
Ulivieri FM, Piodi LP, Rinaudo L et al (2020) Bone strain index in the prediction of vertebral fragility refracture. Eur Radiol Exp 4:23. https://doi.org/10.1186/s41747-020-00151-8
Messina C, Rinaudo L, Cesana BM et al (2021) Prediction of osteoporotic fragility re-fracture with lumbar spine DXA-based derived bone strain index: a multicenter validation study. Osteoporos Int 32:85–91. https://doi.org/10.1007/s00198-020-05620-9
Tabacco G, Naciu AM, Messina C et al (2021) DXA-based bone strain index: a new tool to evaluate bone quality in primary hyperparathyroidism. J Clin Endocrinol Metab 106:2304–2312. https://doi.org/10.1210/clinem/dgab317
Tabacco G, Naciu AM, Messina C et al (2023) DXA-based bone strain index in normocalcemic primary hyperparathyroidism. Osteoporos Int 34:999–1003. https://doi.org/10.1007/s00198-023-06669-y
Rodari G, Scuvera G, Ulivieri FM et al (2018) Progressive bone impairment with age and pubertal development in neurofibromatosis type I. Arch Osteoporos 13:93. https://doi.org/10.1007/s11657-018-0507-8
Messina C, Piodi LP, Grossi E et al (2020) Artificial neural network analysis of bone quality DXA parameters response to teriparatide in fractured osteoporotic patients. PLoS ONE 15:e0229820. https://doi.org/10.1371/journal.pone.0229820
Casciaro S, Peccarisi M, Pisani P et al (2016) An advanced quantitative echosound methodology for femoral neck densitometry. Ultrasound Med Biol 42:1337–1356. https://doi.org/10.1016/j.ultrasmedbio.2016.01.024
Conversano F, Franchini R, Greco A et al (2015) A novel ultrasound methodology for estimating spine mineral density. Ultrasound Med Biol 41:281–300. https://doi.org/10.1016/j.ultrasmedbio.2014.08.017
Diez-Perez A, Brandi ML, Al-Daghri N et al (2019) Radiofrequency echographic multi-spectrometry for the in-vivo assessment of bone strength: state of the art—outcomes of an expert consensus meeting organized by the European Society for Clinical and Economic Aspects of Osteoporosis, Osteoarthritis and Mus. Aging Clin Exp Res 31:1375–1389
Pisani P, Greco A, Conversano F et al (2017) A quantitative ultrasound approach to estimate bone fragility: a first comparison with dual X-ray absorptiometry. Measurement (Lond) 101:243–249. https://doi.org/10.1016/j.measurement.2016.07.033
Di Paola M, Gatti D, Viapiana O et al (2019) Radiofrequency echographic multispectrometry compared with dual X-ray absorptiometry for osteoporosis diagnosis on lumbar spine and femoral neck. Osteoporos Int 30:391–402. https://doi.org/10.1007/s00198-018-4686-3
Messina C, Gitto S, Colombo R et al (2023) Short-term precision and repeatability of radiofrequency echographic multi spectrometry (REMS) on lumbar spine and proximal femur: an in vivo study. J Imaging. https://doi.org/10.3390/JIMAGING9060118
Messina C, Buonomenna C, Menon G et al (2019) Fat mass does not increase the precision error of trabecular bone score measurements. J Clin Densitom 22:359–366. https://doi.org/10.1016/j.jocd.2019.01.001
Messina C, Acquasanta M, Rinaudo L et al (2021) Short-term precision error of bone strain index, a new DXA-based finite element analysis software for assessing hip strength. J Clin Densitom 24:330–337. https://doi.org/10.1016/j.jocd.2020.10.013
Cortet B, Dennison E, Diez-Perez A et al (2021) Radiofrequency echographic multi spectrometry (REMS) for the diagnosis of osteoporosis in a European multicenter clinical context. Bone 143:115786. https://doi.org/10.1016/j.bone.2020.115786
Caffarelli C, Tomai Pitinca MD, Al Refaie A et al (2022) Could radiofrequency echographic multispectrometry (REMS) overcome the overestimation in BMD by dual-energy X-ray absorptiometry (DXA) at the lumbar spine? BMC Musculoskelet Disord. https://doi.org/10.1186/s12891-022-05430-6
Caffarelli C, Al Refaie A, De Vita M et al (2022) Radiofrequency echographic multispectrometry (REMS): an innovative technique for the assessment of bone status in young women with anorexia nervosa. Eat Weight Disord 27:3207–3213. https://doi.org/10.1007/s40519-022-01450-2
Caffarelli C, Tomai Pitinca MD, Al Refaie A et al (2022) Ability of radiofrequency echographic multispectrometry to identify osteoporosis status in elderly women with type 2 diabetes. Aging Clin Exp Res 34:121–127. https://doi.org/10.1007/s40520-021-01889-w
Valentina Anna D, Maria Luisa B, Greta C et al (2021) First assessment of bone mineral density in healthy pregnant women by means of Radiofrequency echographic multi spectrometry (REMS) technology. Eur J Obstet Gynecol Reprod Biol 263:44–49. https://doi.org/10.1016/J.EJOGRB.2021.06.014
Lalli P, Mautino C, Busso C et al (2022) Reproducibility and accuracy of the radiofrequency echographic multi-spectrometry for femoral mineral density estimation and discriminative power of the femoral fragility score in patients with primary and disuse-related osteoporosis. J Clin Med. https://doi.org/10.3390/jcm11133761
Amorim DMR, Sakane EN, Maeda SS, Sergio Setsuo C (2021) New technology REMS for bone evaluation compared to DXA in adult women for the osteoporosis diagnosis: a real-life experience. Arch Osteoporos 16:175. https://doi.org/10.1007/s11657-021-00990-x
Holmes CJ, Racette SB (2021) The utility of body composition assessment in nutrition and clinical practice: an overview of current methodology. Nutrients 13:2493. https://doi.org/10.3390/nu13082493
Campa F, Toselli S, Mazzilli M et al (2021) Assessment of body composition in athletes: a narrative review of available methods with special reference to quantitative and qualitative bioimpedance analysis. Nutrients 13:1620. https://doi.org/10.3390/nu13051620
Sam S (2018) Differential effect of subcutaneous abdominal and visceral adipose tissue on cardiometabolic risk. Horm Mol Biol Clin Investig. https://doi.org/10.1515/hmbci-2018-0014
Beaudart C, Zaaria M, Pasleau F et al (2017) Health Outcomes of Sarcopenia: A Systematic Review and Meta-Analysis. PLoS ONE 12:e0169548. https://doi.org/10.1371/journal.pone.0169548
Albano D, Messina C, Vitale J, Sconfienza LM (2020) Imaging of sarcopenia: old evidence and new insights. Eur Radiol. https://doi.org/10.1007/s00330-019-06573-2
Guglielmi G, Ponti F, Agostini M et al (2016) The role of DXA in sarcopenia. Aging Clin Exp Res 28:1047–1060. https://doi.org/10.1007/s40520-016-0589-3
Bazzocchi A, Ponti F, Albisinni U et al (2016) DXA: technical aspects and application. Eur J Radiol 85:1481–1492. https://doi.org/10.1016/J.EJRAD.2016.04.004
Guglielmi G, Bazzocchi A (2020) Body composition imaging. Quant Imaging Med Surg 10:1576–1579. https://doi.org/10.21037/qims-2019-bc-13
Messina C, Albano D, Gitto S et al (2020) Body composition with dual energy X-ray absorptiometry: from basics to new tools. Quant Imaging Med Surg 10:1687–1698
Damilakis J, Adams JE, Guglielmi G, Link TM (2010) Radiation exposure in X-ray-based imaging techniques used in osteoporosis. Eur Radiol 20:2707–2714. https://doi.org/10.1007/s00330-010-1845-0
Nana A, Slater GJ, Stewart AD, Burke LM (2015) Methodology review: using dual-energy X-Ray absorptiometry (DXA) for the assessment of body composition in athletes and active people. Int J Sport Nutr Exerc Metab 25:198–215. https://doi.org/10.1123/ijsnem.2013-0228
Kaul S, Rothney MP, Peters DM et al (2012) Dual-energy X-ray absorptiometry for quantification of visceral fat. Obesity (Silver Spring) 20:1313–1318. https://doi.org/10.1038/OBY.2011.393
Liu P, Ma F, Lou H, Liu Y (2013) The utility of fat mass index vs body mass index and percentage of body fat in the screening of metabolic syndrome. BMC Public Health. https://doi.org/10.1186/1471-2458-13-629
Cruz-Jentoft AJ, Bahat G, Bauer J et al (2019) Sarcopenia: revised European consensus on definition and diagnosis. Age Ageing 48:16–31. https://doi.org/10.1093/ageing/afy169
Heymsfield SB, Peterson CM, Thomas DM et al (2016) Why are there race/ethnic differences in adult body mass index-adiposity relationships? A quantitative critical review. Obes Rev 17:262–275. https://doi.org/10.1111/OBR.12358
Borga M, West J, Bell JD et al (2018) Advanced body composition assessment: from body mass index to body composition profiling. J Investig Med 66:1–9. https://doi.org/10.1136/jim-2018-000722
Zhao X, Wang Z, Zhang J et al (2013) Estimation of total body skeletal muscle mass in chinese adults: prediction model by dual-energy X-ray absorptiometry. PLoS ONE 8:e53561. https://doi.org/10.1371/journal.pone.0053561
Kirk B, Zanker J, Duque G (2020) Osteosarcopenia: epidemiology, diagnosis, and treatment-facts and numbers. J Cachexia Sarcopenia Muscle 11:609–618. https://doi.org/10.1002/JCSM.12567
Paulin TK, Malmgren L, McGuigan FE, Akesson KE (2024) Osteosarcopenia: prevalence and 10-year fracture and mortality risk—a longitudinal, population-based study of 75-year-old women. Calcif Tissue Int 114:315–325. https://doi.org/10.1007/S00223-023-01181-1
Baim S, Binkley N, Bilezikian JP et al (2008) Official positions of the international society for clinical densitometry and executive summary of the 2007 ISCD position development conference. J Clin Densitom 11:75–91. https://doi.org/10.1016/j.jocd.2007.12.007
Chuang ML, Massaro JM, Levitzky YS et al (2012) Prevalence and distribution of abdominal aortic calcium by gender and age group in a community-based cohort (from the Framingham Heart Study). Am J Cardiol 110:891–896. https://doi.org/10.1016/j.amjcard.2012.05.020
Yang S-W, Yang H-F, Chen Y-Y, Chen W-L (2021) Unraveling the link between metabolic syndrome and abdominal aortic calcification. Nutr Metab Cardiovasc Dis 31:464–471. https://doi.org/10.1016/j.numecd.2020.10.003
Criqui MH, Denenberg JO, McClelland RL et al (2014) Abdominal aortic calcium, coronary artery calcium, and cardiovascular morbidity and mortality in the multi-ethnic study of atherosclerosis. Arterioscler Thromb Vasc Biol 34:1574–1579. https://doi.org/10.1161/ATVBAHA.114.303268
Sethi A, Taylor DL, Ruby JG et al (2022) Calcification of the abdominal aorta is an under-appreciated cardiovascular disease risk factor in the general population. Front Cardiovasc Med 9:1003246. https://doi.org/10.3389/fcvm.2022.1003246
Levitzky YS, Cupples LA, Murabito JM et al (2008) Prediction of intermittent claudication, ischemic stroke, and other cardiovascular disease by detection of abdominal aortic calcific deposits by plain lumbar radiographs. Am J Cardiol 101:326–331. https://doi.org/10.1016/j.amjcard.2007.08.032
Leow K, Szulc P, Schousboe JT et al (2021) Prognostic value of abdominal aortic calcification: a systematic review and meta-analysis of observational studies. J Am Heart Assoc 10:e017205–e017205. https://doi.org/10.1161/JAHA.120.017205
Majjad A, Ghassem MA, Toufik H et al (2020) Relationship between vertebral fracture prevalence and abdominal aortic calcification in women with rheumatoid arthritis. Bone 141:115599. https://doi.org/10.1016/j.bone.2020.115599
Wu M, Liu Y, Zhong C et al (2021) Osteoporosis was associated with severe abdominal aortic calcification based on a cross-sectional study. Arch Osteoporos. https://doi.org/10.1007/s11657-021-00927-4
Gebre AK, Lewis JR, Leow K et al (2022) Abdominal aortic calcification, bone mineral density, and fractures: a systematic review and meta-analysis of observational studies. J Gerontol Ser A. https://doi.org/10.1093/gerona/glac171
Setiawati R, Di CF, Rahardjo P et al (2016) Quantitative assessment of abdominal aortic calcifications using lateral lumbar radiograph, dual-energy X-ray absorptiometry, and quantitative computed tomography of the spine. J Clin Densitom 19:242–249. https://doi.org/10.1016/j.jocd.2015.01.007
Schousboe JT, Lewis JR, Kiel DP (2017) Abdominal aortic calcification on dual-energy X-ray absorptiometry: Methods of assessment and clinical significance. Bone 104:91–100. https://doi.org/10.1016/j.bone.2017.01.025
Glüer C-C (2017) 30 years of DXA technology innovations. Bone 104:7–12. https://doi.org/10.1016/j.bone.2017.05.020
Kauppila LI, Polak JF, Cupples LA et al (1997) New indices to classify location, severity and progression of calcific lesions in the abdominal aorta: a 25-year follow-up study. Atherosclerosis 132:245–250. https://doi.org/10.1016/s0021-9150(97)00106-8
Schousboe JT, Wilson KE, Kiel DP (2006) Detection of abdominal aortic calcification with lateral spine imaging using DXA. J Clin Densitom 9:302–308. https://doi.org/10.1016/j.jocd.2006.05.007
Schousboe JT, Wilson KE, Hangartner TN (2007) Detection of aortic calcification during vertebral fracture assessment (VFA) compared to digital radiography. PLoS ONE 2:e715–e715. https://doi.org/10.1371/journal.pone.0000715
Wilson PWF, Kauppila LI, O’Donnell CJ et al (2001) Abdominal aortic calcific deposits are an important predictor of vascular morbidity and mortality. Circulation 103:1529–1534. https://doi.org/10.1161/01.cir.103.11.1529
Bazzocchi A, Ciccarese F, Diano D et al (2012) Dual-energy X-ray absorptiometry in the evaluation of abdominal aortic calcifications. J Clin Densitom 15:198–204. https://doi.org/10.1016/j.jocd.2011.11.002
Cecelja M, Frost ML, Spector TD, Chowienczyk P (2013) Abdominal aortic calcification detection using dual-energy X-ray absorptiometry: validation study in healthy women compared to computed tomography. Calcif Tissue Int 92:495–500. https://doi.org/10.1007/s00223-013-9704-z
Kelly TL, Wilson KE, Heymsfield SB (2009) Dual energy X-ray absorptiometry body composition reference values from NHANES. PLoS ONE 4:e7038. https://doi.org/10.1371/journal.pone.0007038
Funding
Open access funding provided by Università di Foggia within the CRUI-CARE Agreement. The authors state that this work has not received any funding.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
C. Messina has been speaker for Echolight S.p.a. He is Deputy Editor for La Radiologia Medica.
Data availability
Not applicable.
Code availability
Not applicable.
Ethical approval
Not applicable.
Consent to participate and/or consent to publish
Not applicable.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Messina, C., Fusco, S., Gazzotti, S. et al. DXA beyond bone mineral density and the REMS technique: new insights for current radiologists practice. Radiol med 129, 1224–1240 (2024). https://doi.org/10.1007/s11547-024-01843-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11547-024-01843-6