Abstract
Bacterial plasmids are important mobile genetic elements which often carry specific genes important for bacterial successful survival under various inhospitable environmental conditions. Most of the previous research has focused on large plasmids providing these beneficial traits to their host cells. In this study, small cryptic plasmid pALK1 (3 051 bp) was isolated from metallotolerant and alkalitollerant strain Acinetobacter sp. K1. The plasmid encodes Rep_3 family replication protein and MobM mobilization protein but none pALK1-like plasmids were detected in other Acinetobacter strains of environmental and animal origin. The secondary structure of the pALK1 plasmid is characterized by the complexity of multiple sets of direct and inverted repeats in its nucleotide sequence. Comparative genomics was used to hypothesize the biological functions of these repeats in Acinetobacter spp., whereas several similar plasmids with a related organization of direct repeats and palindromes are known in this genus.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
There are various natural extreme environmental conditions on the Earth. These inhospitable environments provide the habitats for many extremophilic organisms, such as bacteria which cannot survive under normal physiological conditions, as well as for extremotolerant microorganisms able to survive under both extreme and physiological conditions (Pikuta et al. 2007). These bacteria have developed various adaptation mechanisms during evolution enabling them to withstand harsh conditions. However, new types of unnatural environments also arise due to massive industrial activities often leading to the presence of heavy metals, dangerous organic or other toxic compounds in soil or water with unfavorable, negative effect to all living organisms. Specific adaptation to changing environmental conditions can be associated with the presence of extrachromosomal plasmid DNA. Plasmids frequently harbor genes encoding proteins involved in important metabolic processes, antibiotic resistance, virulence or tolerance to high concentrations of heavy metals or other toxic compounds (Elwell and Shipley 1980; Silver 1992; Russell 1996; Bennet 2008; El-Deeb and Altalhi 2009; Mustapha and Halimoon 2015). Plasmids, as mobile genetic elements, can be spread by horizontal gene transfer and thus they play an important role in the evolution and development of bacterial tolerance and adaptation to extreme environments. Horizontal gene transfer can be accomplished through conjugation, transformation or phage transduction (Thomas and Nielsen 2005).
According to classical theoretical models, the maintenance of plasmids in bacterial cells is possible through bacterial conjugation. However, two types of situations may arise. First, plasmids with beneficial genes allow bacteria to survive under selection pressure (e.g., antibiotics, heavy metals etc.). Second, without selective pressure, plasmid maintenance increases the energy requirements in bacteria and decreases bacterial fitness (Baltrus 2013; Vogwill and MacLean 2014). These situations occur in the case of plasmids carrying genes beneficial or vital to the bacteria. Thus, the conjugation provides very important gene transfer in the pan-genome of the environment, such as spread of antibiotic resistance in the bacterial population. This fact is one of the reasons causing significant problems in the treatment of bacterial infections in clinical practice. On the other hand, the existence of the horizontal gene transfer leads to the spread of very interesting genes involved in the tolerance and/or detoxification of various environmental contaminants (Dong et al. 1998; Leungtongkam et al. 2018; Sultan et al. 2020). The study of the genetic organization of plasmids originating from extremotolerant bacteria is helpful for better understanding of adaptation mechanisms, and/or their evolution, and for possible incorporation of bacteria into various types of biotechnologies and bioremediation processes.
Conjugative plasmids often consist of a primary “backbone” which includes rep genes for independent replication, cop genes for plasmid maintenance (stable copy number of plasmids in cell), genes for conjugation transfer mob and tra, par and mrs modules for stable vertical transmission and segregation fidelity and accessory elements with beneficial functions. Some plasmids have stb modules to kill plasmid-free segregants (Norman et al. 2009). On the other hand, many cryptic plasmids without any beneficial genes can be found in various bacterial strains and some of them do not contain all genes important for conjugation. This is the case of a small cryptic mobilizable plasmid pALK1 (3 051 bp) isolated from metallotolerant and alkalitolerant strain Acinetobacter sp. K1 originally found in industrial area near Ziar nad Hronom (Slovakia) contaminated with high concentrations of several heavy metals (Kopcakova et al. 2014).
Members of the genus Acinetobacter are strictly aerobic, Gram-negative, oxidase-negative, indole-negative and catalase-positive coccobacilli ubiquitous in various environments including soil and wastewaters, human and animal body, hospital environment, different types of foodstuffs and extreme environments (Ventosa et al. 1998; Doughari et al. 2011; Ghaima et al. 2018; Gonzalez-Martinez et al. 2018; Ekwanzala et al. 2020). Even though acinetobacters are an important component of various bacterial communities, their ecological roles in environment are still poorly understood (Veress et al. 2020; Zhao et al. 2023). Much attention is paid especially to clinically important species (e.g., A. baumannii) characterized by high antibiotic multiresistance and pathogenic potential (Vázquez-López et al. 2020).
Plasmids found in Acinetobacter spp. could play an important role in environmental adaptation and enhance the accumulation and horizontal transfer of various accessory genes (Maslova et al. 2022; Moran et al. 2022). Why bacteria maintain cryptic non-conjugative plasmids even though they do not contain any beneficial genes remains an unanswered question. According to Iranzo et al. (2016), they act as parasites because they use cellular energy for their synthesis. Despite the great interest in the study of large plasmids encoding antibiotic resistance genes, Lean and Yeo (2017) suggested in their review that small cryptic plasmids should not be forgotten in investigations. Studying of their secondary structure may provide interesting insights into their replication, mobilization or simply their existence.
The aim of this study was to clarify using comparative genomics the biological role of the multiple direct and inverted repeats found in the nucleotide sequence of the pALK1 cryptic plasmid isolated from the environmental Acinetobacter strain K1.
Materials and methods
Origin of bacterial isolates and their identification
Bacterial isolates of the genus Acinetobacter were collected from various environmental and animal sources (Table 1).
Cultivation was carried out under aerobic conditions on Tryptic soy agar (TSA) (BD Difco, USA) or in liquid Luria-Bertani (LB) medium (BD Difco, USA) at 25 °C in the case of environmental isolates and at 37 °C in the case of animal isolates in all performed experiments. The identification of environmental isolates was performed in previous studies by Kopcakova et al. (2014) and Pristas et al. (2015). In the current study, all animal isolates were identified using Matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF MS). Bacterial samples were prepared for analysis according to Ferreira et al. (2011) and were analyzed by the Microflex LT MALDI-TOF MS system with FlexControl v.3.0 (Bruker Daltonics GmbH, Germany). Protein profiles were analyzed using the Biotyper v.2.0 software against the reference library v.3.0.
Plasmid isolation, restriction analysis, recombination DNA techniques and PCR
The presence of plasmid DNA in Acinetobacter isolates was examined using a modified alkaline lysis method (Irawati et al. 2016) followed by electrophoresis in a 1% agarose gel. Isolated plasmid DNAs were digested with several restriction endonucleases (BamHI, EcoRI, EcoRV, HindIII, PaeI, PvuI, PstI, SacI) and obtained fragments were separated using electrophoresis in 1.5% agarose gel. Agarose gels were stained with ethidium-bromide (0.5 µg/mL) and DNA fragments were visualized under UV light using the Gel Logic 212 PRO Imaging System (Carestream, Health Inc., Rochester, NY, USA).
We selected the Acinetobacter sp. K1 isolate to evaluate the potential biological role of plasmid DNAs based on the presence of multiple plasmid DNAs found in its genome and its high tolerance to extreme conditions detected in our previous research (Siposova et al. 2017). To clone the pALK1 plasmid obtained from Acinetobacter sp. K1, the 2 800 bp EcoRI (Fermentas, LT) restriction fragment was cut out from the 1.5% agarose gel and purified using Wizard® SV Gel and PCR Clean-Up System (Promega, USA). Subsequently, five microliters of purified DNA were ligated into plasmid vector pUC118 EcoRI/BAP (Ampr) (Takara, Japan) using T4 DNA ligase, 5 x concentrated T4 DNA Ligase Buffer and nuclease-free water according to manufacturer instructions (InsTAclone™ PCR Cloning Kit; Thermo-Scientific, USA). The reaction mixture was incubated for 1 h at 25 °C, then overnight at 4 °C and subsequently used to transform E. coli MC 1061 (Strr) cells using the heat shock method of bacterial transformation (Chang et al. 2017).
Recombinant plasmids were isolated using GenElute™ Plasmid Miniprep Kit (Sigma-Aldrich, USA) and sequenced using the Sanger dideoxy termination method by GATC Biotech (Konstanz, Germany). Subsequently, based on the sequences obtained, MC9outF/MC9outR primers were designed for PCR amplification of the remaining part of the pALK1 plasmid in all isolates listed in Table 1.
First, total genomic DNA was extracted from 3 mL LB liquid bacterial cultures using GenElute™ Bacterial Genomic DNA Kit (Sigma-Aldrich, USA). The polymerase chain reaction was performed in 50 µL reaction mixture which consists of 5 µL 10 x concentrated High Yield Buffer with 3 mM MgCl2, 200 µM of dNTP mix, 1 µM of primer MC9outF (5´-ACACGCTTTCACAGATGCAG-3´) and 1 µM of primer MC9outR (5´-CGTCTTAACCGTGCCAAATT-3´), 1.25 U of Taq polymerase (Taq Core Kit, Jena Bioscience, Germany) and 50 ng of DNA template. Thermocycling conditions were as follows: initial denaturation at 95 °C for 5 min, 30 cycles of denaturation at 95 °C for 1 min, annealing at 52 °C for 1 min, extension at 72 °C for 3 min, final extension at 72 °C for 15 min (Thermal Cycler Bio-Rad Laboratories, Richmond, USA).
The PCR product obtained using total DNA of the K1 isolate as a template was purified, ligated into the plasmid vector pTZ57R/T (Ampr) (Thermo-Scientific, USA), cloned and sequenced similarly as described above. After sequencing, the pALK1 sequence was completed and deposited under accession number ON109139 to the Genbank database (https://www.ncbi.nlm.nih.gov/genbank/). In addition, the pALK1 sequence was also confirmed by the whole genome sequence analysis of Acinetobacter sp. K1 and this sequence is available in the GenBank database under accession number NZ_JALGQY010000067 (Petrová et al. 2023).
Sequence analysis of the pALK1 plasmid
Complete pALK1 plasmid sequence was subjected to homology search against the GenBank database using the Basic Local Alignment Search Tool (BLAST) algorithms (https://blast.ncbi.nlm.nih.gov/Blast.cgi) (Altschul et al. 1990). Direct repeats and palindromes were detected using the tool available on Webgenetics™ server (https://www.webgenetics.com/acts/wg?group=repeats&key=prog). Conserved domains were searched using Conserved Domain Database (CDD) (https://www.ncbi.nlm.nih.gov/Structure/cdd/wrpsb.cgi) (Marchler-Bauer et al. 2015). Open reading frames were detected using ORFfinder (https://www.ncbi.nlm.nih.gov/orffinder/). GC-content was analyzed using the NovoPro server (https://www.novoprolabs.com/tools/gc-content). The Mathews lab server (https://rna.urmc.rochester.edu/RNAstructureWeb/Servers/Predict1/Predict1.html) was used to predict the secondary structure of the pALK1 conserved domain.
Results and discussion
Characterization of bacterial isolates
Multiple bacterial isolates were identified in the brown mud created by the sintering method of aluminum production near Ziar nad Hronom (Slovakia) in the previous research (Kopcakova et al. 2014). The brown mud was characterized by extreme pH 11.6 and high heavy metal concentrations at the time of sampling (Schwarz and Lalik 2012). A combination of diverse extreme conditions led to the considerably low bacteria counts (3 500 cfu/g) using a non-selective cultivation medium. The bacterial community of the brown mud include various species belonging to the genera such as Acinetobacter, Bacillus, Kocuria, Isoptericola, Arthrobacter, or Streptomyces (Kopcakova et al. 2014; Pristas et al. 2015).
Other group of Acinetobacter spp. investigated in this study was isolated from nickel sludge disposal site of Niklova huta smelter near Sered (Slovakia). The sludge was characterized by circumneutral pH (pH = 8.1) and it contained Fe (50–80%), Cr2O3 (2.5–3.5%), SiO2 (6–8%), Al2O3 (6–8%), CaO (2.5–3.5%), Ni (0.17%) and P2O3 (0.6%) (Michaeli et al. 2012). The bacterial community was dominated by Arthrobacter spp., Rhodobacter spp., Staphylococcus spp., Brevundimonas spp. and Acinetobacter spp. (Pristas et al. 2015).
Seven animal isolates of Acinetobacter spp. were obtained from the cloaca and internal organs of exotic reptile and mammal species reared in large-scale farming outside the European Union, which died during the transport to Poland (see Table 1).
In our set of environmental samples, A. calcoaceticus was found to be prevalent species in environmental Acinetobacter communities and A. baumannii dominated among animal isolates. The K1 isolate from the brown mud was identified as Acinetobacter spp. and selected for further analysis (this study) based on the presence of complex plasmid population observed in our previous research. At least four plasmids in size from 3 kbp to more than 25 kbp were detected in this strain (Siposova et al. 2017). Since the K1 isolate showed a MALDI TOF MS score below the reliable species identification threshold (classified as Acinetobacter lwoffii with the score of 1.96), its 16 S rRNA gene sequence was analyzed. The 16 S rDNA sequence showed 99.8% similarity with the Acinetobacter lwoffii strain ZS207 (CP019143.2) (Kopcakova et al. 2014). However, complete genome comparisons using the Type (Strain) Genome Server (TYGS) (https://tygs.dsmz.de/; Meier-Kolthoff and Göker 2019) did not cluster the K1 isolate to Acinetobacter lwoffii species (Petrová et al. 2023), therefore we use Acinetobacter sp. K1 nomenclature for this strain in recent study.
Environmental or clinical acinetobacters often contain plasmid DNAs providing specific benefits depending on the environment in which they live, such as high tolerance to toxic heavy metals or antibiotic resistance. Plasmid DNA analysis indicated the presence of extrachromosomal DNA in five bacterial strains analyzed in this study. Multiple plasmids have already been detected in Acinetobacter baumannii, the most important clinical species of the genus Acinetobacter (Towner 2009). However, many plasmids have also been found in environmental acinetobacters, such as in the study of Midlin et al. (2016). They demonstrated four of the five permafrost strains (including Acinetobacter lwoffii) containing 8–12 plasmids with various lengths (4 135–287 630 bp), of which one or two plasmids carried different combinations of genes involved in the mechanisms of heavy-metal and arsenic resistance. Based on these findings, the authors hypothesized that not only mercury, but also the presence of other metals have played an important role in the evolution of the genus Acinetobacter (Midlin et al. 2016).
Sequence analysis of the pALK1 plasmid
We obtained the complete sequence of a small plasmid isolated from the strain Acinetobacter sp. K1 using recombinant DNA techniques. The pALK1 plasmid is 3 051 bp long and shows significant similarity to five small plasmid sequences available in the GenBank database (Online resource 1: Figure S1).
The sequence analysis shows that the pALK1 plasmid sequence contains two ORFs encoding proteins involved in plasmid replication and mobilization. The ORF1 is 1 134 bp long (377 amino acids) and encodes the mobilization protein Pre/MobM (plasmid recombination enzyme, pfam01076). The second ORF2 is 939 bp long (312 amino acids) and encodes the replication protein belonging to the Rep_3 protein family (pfam01051). The pALK1 plasmid sequence lacks tra genes involved in bacterial conjugation, therefore, it is probably transferred to other bacteria through the conjugative systems of larger conjugative plasmids. Thus, pALK1 is a mobilizable plasmid whose transfer depends on the genetic equipment of another mobile genetic element. This observation is consistent with the findings of Fondi et al. (2010), who demonstrated that most of the analyzed plasmids lack the genes necessary for their transmission (tra genes) or mobilization (mob genes). Therefore, the authors hypothesized that horizontal gene transfer was realized probably by natural transformation or transduction with the participation of bacteriophages. The size of the pALK1 plasmid is consistent with the trend that mobilizable plasmids are smaller than conjugative ones (Smillie et al. 2010). Genes encoding mobilization and replication proteins show high similarities with the genes of Acinetobacter spp. and other genera such as Psychrobacter. All plasmids of similar size to pALK1 (Online resource 1: Fig. S1) contain Rep_3 or RepM and MobM proteins and show high similarity to pALK1 proteins (Tables 2 and 3).
No other putative protein-coding genes were found in the nucleotide sequence of the pALK1 plasmid, indicating that the pALK1 plasmid is cryptic and provides no selection benefits to the host cell.
Blastn analysis revealed the presence of a highly conserved DNA sequence (240–327 nr) in the pALK1 plasmid, which is present in multiple plasmids of Acinetobacter, Psychrobacter and Alcaligenes species (data not shown). Its sequence is characterized by complex secondary structures (Fig. 1).
Occurrence of direct and inverted repeats in the pALK1 sequence
A detailed analysis of the pALK1 nucleotide sequence revealed the set of multiple direct (DR1 – DR5) and inverted repeats (IR1 - IR6) (Fig. 2). Subsequent comparative analysis showed that similar repeats are also present in several Acinetobacter plasmids. Based on these findings, a comparative analysis was performed with small Acinetobacter plasmids simultaneously encoding Rep_3/RepM and MobM proteins (Rep_3/RepM-MobM plasmids, Tables 2 and 3), only Rep_3/RepM protein (Rep_3/RepM-(non MobM) plasmids) and only MobM protein (MobM-(non-Rep_3/RepM) plasmids) (Online resource 1: Table S1 and S2).
Four 15-nucleotide long direct repeats designated DR1 are located 68 nucleotides upstream of the replication protein Rep_3 in the pALK1 plasmid. This structure can be recognized by a replication protein as the Rep_3 family includes the E. coli protein RepA which binds to repetitive DNA sequences flanking the gene encoding this protein. Huang et al. (2014) described oriV region of the A. baumannii plasmid pABTJ2 which consists of four time repeating imperfectly conserved direct repeats of 22 bp called iterons (Chattoraj 2000). The part of the sequence that encodes the Rep_3 protein is localized immediately downstream of oriV. This composition is typical of theta-type replication, but a rolling-circle replication mechanism is more characteristic of small multicopy plasmids (Espinosa et al. 2000; Krüger et al. 2004; Khan 2005). Iterons (3–6 repetitions) in Acinetobacter strains with Rep_3 superfamily replicons are 19–22 bp long and average distance between iterons and rep gene is 10–200 bp. Repetitions are organized in a row without any gaps (Lean and Yeo 2017). No such DNA organization was observed in the set of plasmids analyzed in this study. Repetitions in pALK1-like plasmids are shorter and separated by 6–18 nucleotides.
Similar organization of DR1 to that of pALK1 can be observed in pALK1-like and unnamed-like plasmids. The only difference is that the unnamed-like plasmids possess one repetition of the four repeats localized in pALK1-like plasmids. Distances between repetitions and between repetitions and rep gene are highly conserved. RepM plasmids are characterized by different structure of DR1, while repetitions are organized in a row (Fig. 3a).
The putative role of these repeats in replication initiation could be confirmed by the low GC content in the DR1-rich region of the pALK1 plasmid. Plasmid ori regions are generally characterized by a low GC content because of stronger chemical bond between these bases. Cleavage of the AT base pair bond requires less energy and the ori region often consists mainly of them. The AT-rich region in the pALK1 nucleotide sequence was found around 2 716 bp and the second lowest GC content was observed around 590 bp, the region downstream of the DR1 and upstream of the nucleotide sequence of replication protein.
Searching for small Rep_3/RepM plasmids that do not encode mobM showed that only RepM plasmid sequences are deposited in the database at the time of research. The secondary structure of DR1 but not the sequence of repeats is conserved in Rep_3/RepM-(non-MobM) plasmids and they contain other repeats in the same position. MobM-(non-Rep_3/RepM) plasmids completely lack the DR1-5 structure (Online resource 1: Table S1).
Direct repeats DR2, DR2-like and DR3 occur in all analyzed plasmids of the Rep_3/RepM-MobM group (Table 2.), while their organization within the plasmid DNA is similar to pALK1 (Fig. 3b, c). DR2-like structure was found just in two plasmids of Rep_3/RepM-(non MobM) group; DR3 is present in all plasmids of this group, with one exception (Online resource 1: Table S1).
The second interesting direct repeat DR4 is composed of 21 nucleotides with one part of this repetition located in a highly conserved sequence (240–327 nr) widely presented in Acinetobacter species (Fig. 1). Two hundred and seventy-nine Acinetobacter strains contain this 21 nr sequence at least once in the plasmid or in nine cases on chromosomal DNA. Two to seven repetitions are found in 37 Acinetobacter species. These plasmids encode a replication protein of the Rep_3 protein family similar to the pALK1 plasmid or the RepM protein (Online resource 1: Table S3). Some of them also encode an uncharacterized protein rep_pAB02_ORF2. We hypothesize that this sequence might be helpful in natural transformation in Acinetobacter spp. It is known that some Gram-negative bacteria such as Haemophilus influenzae or Neisseria gonorrhoeae are highly selective for DNA acquired by natural transformation processes. Mell and Redfield (2014) identified a short 9 nr DNA segment AAGTGCGGT in H. influenzae named as uptake signal sequence (USS) and a 10 nr DNA segment GCCGTCTGAA in N. gonorrhoeae named as DNA uptake sequence (DUS) by sequencing of preferentially absorbed sequences. These sequences are widely represented in their genomes and are recognized by naturally competent bacteria of the same bacterial species through bacterial surface receptor proteins. However, in the case of N. gonorrhoeae, DNA uptake may even occur when the DUS sequence is not present in donor cells. For example, this was confirmed by the presence of a human gene fragment in the genome of N. gonorrhoeae (Seitz and Blokesch 2012; Anderson and Seifert 2011). Acinetobacter spp. are well studied as natural competent Gram-negative bacteria that are widespread in natural soil and aquatic environments, industrial areas contaminated with toxic substances or in human hosts.
The organization of DR4 and the Rep_3 protein was analyzed in plasmids listed in Online resource 1: Table S3 and in the Rep_3/RepM-MobM group of plasmids (Table 2). The results of this analysis show that the organization of the DR4 repetition and the replication protein changes with plasmid length. Plasmid p6_010030 (CP029394.1) has an almost identical organization and the same arrangement of repeats to pALK1. The plasmids analyzed could be classified into three groups according to distances between DR4 and Rep_3/RepM and between DR4 repeats. First group includes plasmids with the length of 2 000–5 000 bp. In this case, two repetitions are located upstream of the Rep_3 or RepM protein, while distances between them are similar among all plasmids examined. Figure 3d demonstrates small differences compared to the pALK1 plasmid. Although, unnamed-like plasmids encode the Rep_3 protein, they retain different direct repeats upstream of its gene at the similar position to DR1. Larger plasmids (5 000–15 000 bp) encoding the Rep_3 protein contain two repetitions with conserved distances between them. An exception is the plasmid p7_010062 containing four repetitions in front of the Rep_3. RepM plasmids contain only one DR4 sequence which is characteristic of all larger plasmids (15 000–74 000 bp) encoding several RepM proteins (Online resource1: Fig. S2 and Fig. S3).
Three 9-bp repetitions designated as DR5 are localized within the MobM protein sequence. This structure is present just in two plasmids from the Rep_3/RepM-MobM group but in none of Rep_3/RepM-(non-MobM) and MobM-(non-Rep_3/RepM) plasmids (Table 2 and Online resource 1: Table S1).
The pALK1 sequence also contains 14 nr palindrome IR1 likely forming a stem loop structure to which the Mob protein can bind. This palindrome is also found in plasmid pAL_065 − 11. Plasmids unnamed8, p6_010030, unnamed2, unnamed2, pXBB1-1 and p6_060092 contain different inverted repeat at the same position. Almost all these plasmids have this palindrome at the same distance (77 bp) upstream of the mob gene. This distance is shorter by one nucleotide only in plasmid pXBB1-1. In addition, pE47_008, unnamed8, p6_010030, unnamed2, unnamed2 and p6_060092 contain inverted repeats IR4 and IR6 (Table 3).
Only plasmid pA52-4 contains a IR1-like palindrome within the Rep_3/RepM-(non-MobM) group; p11_010062 and p10_010034 contain a IR3-like inverted repeat. The IR1-like structure is present on plasmid p2012N08-034-4 and the IR6-like structure on plasmids pAS70-6 and p2012N08-034-4 within the MobM-(non-Rep_3/RepM) group (Online resource 1: Table S2).
The occurrence of pALK1-like plasmids in Acinetobacter spp. from various environments
The presence of pALK1 related plasmids in Acinetobacter strains from industrial areas in Ziar nad Hronom, Sered and animal isolates was examined using PCR reactions with primers MC9outF and MC9outR, specifically constructed for the amplification of this part of the pALK1 plasmid. Sequences similar to the pALK1 plasmid were not detected in other isolates of Acinetobacter spp. found in the brown sludge dump or in a similar environment of a landfill waste mud from the nickel production. Similarly, no pALK1-like sequences were detected in animal isolates. This finding is quite surprising because we found several plasmids from different environments with similar size and secondary structure in the NCBI database.
Conclusions
This study was focused on the analysis of the secondary structure of a small cryptic plasmid pALK1 isolated from the bacterium living in the extreme environment and comparative analyses with similar small plasmids from bacteria belonging to the genus Acinetobacter. Based on our results, examined plasmids were divided into three main groups as Rep_3/RepM-MobM plasmids, Rep_3/RepM-(non MobM) plasmids and MobM-(non-Rep_3/RepM) plasmids. Each group has a specific arrangement of direct and inverted repetitions. Repetition DR1 is probably associated with the Rep_3/RepM protein and may function as iteron sequence. DR4 present in multiple plasmids of Acinetobacter species has probably another important biological function, which is currently unknown. The MobM protein is probably linked to IR1 palindrome in studied plasmid, because distances between them is conserved in all analyzed plasmids in the Rep_3/RepM-MobM group. On the other hand, further analyses will be necessary to completely understand the biological functions of highly conserved repeating structures found in Acinetobacter plasmids and for better understanding of the existence of small cryptic plasmids in bacteria.
Data availability
All data generated or analyzed during this study are included in this manuscript and supplementary material. The pALK1 plasmid sequence is available in the GenBank database under accession number NZ_ON109139.1.
Abbreviations
- BLAST:
-
Basic Local Alignment Search Tool
- bp:
-
Base pair
- CDD:
-
Conserved domain database
- CDS:
-
Conserved domain sequence
- cfu:
-
Colony forming unit
- DNA:
-
Deoxyribonucleic acid
- dNTP:
-
Deoxynucleotide triphosphate
- DR:
-
Direct repeat
- DUS:
-
DNA uptake sequence
- IR:
-
Inverted repeat
- kbp:
-
Kilobase pair
- LB:
-
Luria-Bertani medium
- MALDI-TOF:
-
MS Matrix assisted laser desorption ionization time of flight mass spectroscopy
- ORF:
-
Open reading frame
- PCR:
-
Polymerase chain reaction
- RNA:
-
Ribonucleic acid
- rRNA:
-
Ribosomal ribonucleic acid
- TSA:
-
Tryptic soy agar
- TYGS:
-
Type (Strain) Genome Server
- USS:
-
Uptake signal sequence
References
Altschul SF, Gish W, Miller W et al (1990) Basic local alignment search tool. J Mol Biol 215:403–410. https://doi.org/10.1016/S0022-2836(05)80360-2
Anderson MT, Seifert HS (2011) Opportunity and means: horizontal gene transfer from the human host to a bacterial pathogen. mBio 2(1):e00005. https://doi.org/10.1128/mBio.00005-11
Baltrus DA (2013) Exploring the costs of horizontal gene transfer. Trends Ecol Evol 28:489–495. https://doi.org/10.1016/j.tree.2013.04.002
Bennett PM (2008) Plasmid encoded antibiotic resistance: acquisition and transfer of antibiotic resistance genes in bacteria. Br J Pharmacol 153:347–357. https://doi.org/10.1038/sj.bjp.0707607
Chang A, Chau V, Landas J, Pang Y (2017) Preparation of calcium competent Escherichia coli and heat-shock transformation. UJEMI 1:22–25
Chattoraj DK (2000) Control of plasmid DNA replication by iterons: no longer paradoxical. Mol Microbiol 37:467–476. https://doi.org/10.1046/j.1365-2958.2000.01986.x
Dong Q, Springeal D, Schoeters J et al (1998) Horizontal transfer of bacterial heavy metal resistance genes and its applications in activated sludge systems. Water Sci Technol 37:465–468. https://doi.org/10.2166/wst.1998.0696
Doughari HJ, Ndakidemi PA, Human IS, Benade S (2011) The Ecology, Biology and Pathogenesis of Acinetobacter spp.: an overview. Microbes Environ 26:101–112. https://doi.org/10.1264/jsme2.me10179
Ekwanzala MD, Dewar JB, Momba MNB (2020) Environmental resistome risks of wastewaters and aquatic environments deciphered by shotgun metagenomic assembly. Ecotoxicol Environ Saf 197:110612. https://doi.org/10.1016/j.ecoenv.2020.110612
El-Deeb B, Altalhi AD (2009) Degradative plasmid and heavy metal resistance plasmid naturally coexist in phenol and cyanide assimilating bacteria. Am J Biotech 5:84–93. https://doi.org/10.3844/ajbbsp.2009.84.93
Elwell LP, Shipley PL (1980) Plasmid mediated factors associated with virulence of bacteria to animals. Annu Rev Microbiol 34:465–496. https://doi.org/10.1146/annurev.mi.34.100180.002341
Espinosa M, Cohen S, Couturier M et al (2000) Plasmid replication and copy number control. In: Thomas CM (ed) The horizontal gene pool: bacterial plasmids and gene spread, 1st edn. Harwood Academic Publishers, Amsterdam, pp 1–47
Ferreira L, Sanchez-Juanes F, Muñoz-Bellido JL et al (2011) Rapid method for direct identification of bacteria in urine and blood culture samples by matrix-assisted laser desorption ionization time-offlight mass spectrometry: intact cell vs. extraction method. Clin Microbiol Infect 17:1007–1012. https://doi.org/10.1111/j.1469-0691.2010.03339.x
Fondi M, Bacci G, Brilli M et al (2010) Exploring the evolutionary dynamics of plasmids: the Acinetobacter pan-plasmidome. BMC Evol Biol 10:59. https://doi.org/10.1186/1471-2148-10-59
Ghaima K, Lateef S, Khaz’al Z (2018) Heavy metal and antibiotic resistance of Acinetobacter spp. isolated from diesel fuel polluted soil. J Adv Lab Res Biol 9:58–64
Gonzalez-Martinez A, Muñoz-Palazon B, Maza-Márquez P et al (2018) Performance and microbial community structure of a polar Arctic Circle aerobic granular sludge system operating at low temperature. Bioresour Technol 256:22–29. https://doi.org/10.1016/j.biortech.2018.01.147
Huang H, Dong Y, Yang ZL et al (2014) Complete sequence of pABTJ2, a plasmid from Acinetobacter baumannii MDR-TJ, carrying many phage-like elements. Genom Proteom Bioinform 12(4):172–177. https://doi.org/10.1016/j.gpb.2014.05.001
Iranzo J, Puigbo P, Lobkovsky AE et al (2016) Inevitability of genetic parasites. Genome Biol Evol 8:2856–2869. https://doi.org/10.1093/gbe/evw193
Irawati W, Yuwono T, Rusli A (2016) Detection of plasmids and curing analysis in copper resistant bacteria Acinetobacter sp. IrC1, Acinetobacter sp. IrC2, and Cupriavidus sp. IrC4. Biodiversitas 17:296–300. https://doi.org/10.13057/biodiv/d170140
Khan SA (2005) Plasmid rolling-circle replication: highlights of two decades of research. Plasmid 53:126–136. https://doi.org/10.1016/j.plasmid.2004.12.008
Kopcakova A, Stramova Z, Kvasnova S et al (2014) Need for database extension for reliable identification of bacteria from extreme environments using MALDI TOF mass spectrometry. Chem Pap 68:1435–1442. https://doi.org/10.2478/s11696-014-0612-0
Krüger R, Rakowski SA, Filutowicz M (2004) Participating elements in the replication of iteron-containing plasmids. In: Phillips GJ, Funnell BE (eds) Plasmid Biology. ASM Press, Washington DC, pp 23–45
Lean SS, Yeo ChCh (2017) Small, enigmatic plasmids of the nosocomial pathogen, Acinetobacter baumannii: good, bad, who knows? Front Microbiol 8:1547. https://doi.org/10.3389/fmicb.2017.01547
Leungtongkam U, Thummeepak R, Tasanapak K et al (2018) Acquisition and transfer of antibiotic resistance genes in association with conjugative plasmid or class 1 integrons of Acinetobacter baumannii. PLoS ONE 13(12):e0208468. https://doi.org/10.1371/journal.pone.0208468
Marchler-Bauer A, Derbyshire MK, Gonzales NR et al (2015) CDD: NCBI’s conserved domain database. Nucleic Acids Res 43:222–226. https://doi.org/10.1093/nar/gku1221
Maslova O, Mindlin S, Beletsky A et al (2022) Plasmids as key players in acinetobacter adaptation. Int J Mol Sci 23:10893. https://doi.org/10.3390/ijms231810893
Meier-Kolthoff JP, Göker M (2019) TYGS is an automated high-throughput platform for state-of-the-art genome-based taxonomy. Nat Commun 10:2182. https://doi.org/10.1038/s41467-019-10210-3
Mell JC, Redfield RJ (2014) Natural competence and the evolution of DNA uptake specificity. J Bacteriol 196:1471–1483. https://doi.org/10.1128/JB.01293-13
Michaeli E, Boltiziar M, Solar V et al (2012) The landfill of industrial waste – luzenec near the former nickel smelter at Sered town as an example of environmental load. Zivotne Prostredie 46:63–68
Midlin S, Petrenko A, Kurakov A et al (2016) Resistance of permafrost and modern Acinetobacter lwoffii strains to heavy metals and arsenic revealed by genome analysis. Biomed Res Int 2016:3970831. https://doi.org/10.1155/2016/3970831
Moran RA, Liu H, Doughty EL et al (2022) GR13-type plasmids in Acinetobacter potentiate the accumulation and horizontal transfer of diverse accessory genes. Microb Genom 8(6):mgen000840. https://doi.org/10.1099/mgen.0.000840
Mustapha MU, Halimoon N (2015) Screening and isolation of heavy metal tolerant bacteria in industrial effluent. Procedia Environ Sci 30:33–37. https://doi.org/10.1016/j.proenv.2015.10.006
Norman A, Hansen LH, Sørensen SJ (2009) Conjugative plasmids: vessels of the communal gene pool. Phil Trans R Soc B 364:2275–2289. https://doi.org/10.1098/rstb.2009.0037
Petrová N, Kisková J, Kolesárová M et al (2023) Genetic basis of Acinetobacter sp. K1 adaptation mechanisms to extreme environmental conditions. Life 13:1728. https://doi.org/10.3390/life13081728
Pikuta EV, Hoover RB, Tang J (2007) Microbial extremophiles at the limits of life. Crit Rev Microbiol 33:183–209. https://doi.org/10.1080/10408410701451948
Pristas P, Stramova Z, Kvasnova S et al (2015) Non-ferrous metal industry waste disposal sites as a source of poly-extremotolerant bacteria. Nova Biotechnol Chim 14:62–68. https://doi.org/10.1515/nbec-2015-0015
Russell AD (1996) Plasmids and bacterial resistance to biocides. J Appl Microbiol 82:155–165. https://doi.org/10.1046/j.1365-2672.1997.00198.x
Schwarz M, Lalik M (2012) Possibilities of exploitation of bauxite residue from alumina production. In: Nusheh M, Ahuett HG, Arrambide A (eds) Recent researches in metallurgical engineering - from extraction to forming. IntechOpen, Rijeka, pp 1–22. https://doi.org/10.5772/37644
Seitz P, Blokesch M (2012) Cues and regulatory pathways involved in natural competence and transformation in pathogenic and environmental gram-negative bacteria. FEMS Microbiol Rev 37:336–363. https://doi.org/10.1111/j.1574-6976.2012.00353.x
Silver S (1992) Plasmid-determined metal resistance mechanisms: range and overview. Plasmid 27:1–3. https://doi.org/10.1016/0147-619X(92)90001-Q
Siposova N, Liptakova V, Kvasnova S et al (2017) Genetic diversity of Acinetobacter spp. adapted to heavy metal polluted environments. Nova Biotechnol et Chim 16(1):42–47. https://doi.org/10.1515/nbec-2017-0006
Smillie Ch, Garcillán-Barcia PM, Francia VM et al (2010) Mobility of plasmids. Mikrobiol Mol Biol Rev 74:434–452. https://doi.org/10.1128/MMBR.00020-10
Sultan I, Ali A, Gogry FA et al (2020) Bacterial isolates harboring antibiotics and heavy-metal resistance genes co-existing with mobile genetic elements in natural aquatic water bodies. Saudi J Biol Sci 27:2660–2668. https://doi.org/10.1016/j.sjbs.2020.06.002
Thomas ChM, Nielsen KM (2005) Mechanisms of, and barriers to, horizontal gene transfer between bacteria. Nat Rev Microbiol 3:711–721. https://doi.org/10.1038/nrmicro1234
Towner KJ (2009) Acinetobacter: an old friend, but a new enemy. J Hosp Infect 73:355–363. https://doi.org/10.1016/j.jhin.2009.03.032
Vázquez-López R, Solano-Gálvez SG, Juárez Vignon-Whaley JJ et al (2020) Acinetobacter baumannii resistance: a real challenge for clinicians. Antibiotics 9(4):205. https://doi.org/10.3390/antibiotics9040205
Ventosa A, Nieto JJ, Oren A (1998) Biology of moderately halophilic aerobic bacteria. Microbiol Mol Biol Rev 62:504–544. https://doi.org/10.1128/mmbr.62.2.504-544.1998
Veress A, Nagy T, Wilk T et al (2020) Abundance of mobile genetic elements in an Acinetobacter lwoffii strain isolated from Transylvanian honey sample. Sci Rep 10:2969. https://doi.org/10.1038/s41598-020-59938-9
Vogwill T, MacLean RC (2014) The genetic basis of the fitness costs of antimicrobial resistance: a meta-analysis approach. Evol Appl 8:284–295. https://doi.org/10.1111/eva.12202
Zhao Y, Wei H-M, Yuan J-L et al (2023) A comprehensive genomic analysis provides insights on the high environmental adaptability of Acinetobacter strains. Front Microbiol 14:1177951. https://doi.org/10.3389/fmicb.2023.1177951
Acknowledgements
We would like to thank Olga Goławska from Department of Microbiology, National Veterinary Research Institute, Puławy, Poland for providing us animal isolates analyzed in this study.
Funding
Open access funding provided by The Ministry of Education, Science, Research and Sport of the Slovak Republic in cooperation with Centre for Scientific and Technical Information of the Slovak Republic. This work was supported by Slovak Grant Agency VEGA (grant number 1/0779/21).
Open access funding provided by The Ministry of Education, Science, Research and Sport of the Slovak Republic in cooperation with Centre for Scientific and Technical Information of the Slovak Republic
Author information
Authors and Affiliations
Contributions
Supervision: P. Pristas; Microbiological and molecular methods: N. Petrova, M. Coma; Bioinformatics: N. Petrova, J. Kiskova, M. Coma; Comparative genomics: N. Petrova; visualization: N. Petrova, J. Kiskova; material and technical support: M. Kolesarova; Writing-original draft preparation: N. Petrova; review and editing: P. Pristas, J. Kiskova, N. Petrova. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Conflict of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Ethics approval
Not applicable.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Petrova, N., Coma, M., Pristas, P. et al. Complex secondary structure in small Rep_3 plasmids of Acinetobacter spp.. Biologia 78, 3667–3678 (2023). https://doi.org/10.1007/s11756-023-01520-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11756-023-01520-5