Abstract
The COVID-19 pandemic has led to a significant increase in the global use of face masks, with reports indicating that approximately 129 billion people worldwide use them every month. Many masks contain MPs, which can pose environmental and health risks. The aim of this study is to assess the properties of MPs that are released from ten different mask brands. The masks that were selected were weighed, immersed in deionized distilled water, stirred, and MPs that were released into the water were collected using a cellulose ester membrane. The collected MPs were then analyzed using an optical microscope to observe their shape and color. The results showed that the rates of MPs released from N95 masks, surgical masks, and 3D masks were 54, 23, and 23%, respectively. The N95 mask had the highest percentage of MPs due to its heavy weight. The observed shapes of MPs, in terms of abundance percentage, were filamentous > spherical > irregular > fragmented. Furthermore, the majority of MPs were found to be transparent or black in color. This study offers valuable insights into the mechanisms behind the release of MPs from disposable face masks, shedding light on the critical issue of microplastic pollution resulting from mask waste.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
The Covid-19 pandemic is widely regarded as the most significant global health crisis of our time, presenting significant health, economic, environmental, and social challenges for the entire human population (Maghsodian et al. 2022). Global pollution from plastic polymers has significantly increased, particularly during the coronavirus outbreak (Khoshmanesh et al. 2023). During the COVID-19 pandemic, face masks were used to reduce the transmission of disease (Mirzaie et al. 2022; Moshirfar et al. 2020).
According to reports, about 129 billion face masks are used every month worldwide, often containing plastic microfibers (Prata et al. 2020). Plastic waste is one of the most prevalent environmental pollutants (Geyer et al. 2017). Plastics in aquatic environments may fragment or disintegrate due to physical, chemical, and biological processes, eventually releasing MPs (Bonyadi et al. 2022). MPs enter the aquatic environment through water channels, industrial and municipal effluents, and wind currents (Khoshmanesh et al. 2023). Microplastic particles in aquatic environments vary in terms of size, specific density, chemical composition, and shape (Khoshmanesh et al. 2023; Maghsodian et al. 2021). In fact, the fate of MPs in aquatic environments depends on the density and constituents of the polymer (Maghsodian et al. 2021).
MPs released from masks are considered an environmental and health issue. Most of these pollutants are composed of polypropylene, polyurethane, nitrile, acrylic, polystyrene, polycarbonate, and polyethylene (Smereka and Szarpak 2020). These polymer materials have a detrimental effect on numerous plants and animals (Fadare and Okoffo 2020; Kwak and An 2021). In a study, it was discovered that masks can release significant amounts of MPs into the environment (Chen et al. 2021). Various MPs are released from masks due to environmental factors, such as exposure to sunlight and changes in ambient temperature (Zahmatkesh Anbarani et al. 2023). The release of MPs from polypropylene masks occurs slowly due to their high resistance to fluctuations in water flow, high molecular weight, absence of active functional groups, and presence of methyl chains. The penetration of MPs into the human body can cause damage to the lungs and intestines. The detection of MPs in the nasal mucosa of individuals wearing masks suggests that they may be inhaling them while wearing a mask (Ma et al. 2021). MPs ingestion may cause cytotoxic and inflammatory effects in human lung epithelial cells, which can directly harm the body (Hajiouni et al. 2022; Kashfi et al. 2022). Furthermore, these pollutants can carry toxic chemicals and pathogenic microorganisms, which can harm various organs (Vethaak and Leslie 2016). SMs are the most commonly used personal protective equipment during the COVID-19 pandemic. However, their widespread use and improper disposal have led to the release of large amounts of MPs into aquatic environments. It is estimated that approximately 47 microplastic fibers are released into the environment daily from a single mask (Sun et al. 2021a). Wang et al. (2021) conducted a study on the changes in characteristics and environmental behavior of disposable masks when exposed to coastal environments (Wang et al. 2021). In a study, the researchers compared the number of microfibers released from masks in dry state (ranging from 14,031.97 to 177,601.58 fibers/mask) to that in wet state (ranging from 2557.65 to 22,525.89 fibers/mask) (Rathinamoorthy and Balasaraswathi 2022). The release rate of MPs from masks increases with age due to mechanical wear and tear and exposure to natural environments (Morgana et al. 2021). This study enhances our understanding of the mechanisms involved in the release of MPs from disposable masks and provides a basis for estimating the extent of microplastic pollution caused by mask waste. The aim of the present study was to investigate the release of MPs from discarded medical masks and determine their characteristics, such as shape, color, number, and size.
Materials and methods
Materials
The masks selected for this research included ten different brands of medical masks commonly used in Mashhad, Iran. The main material of all masks was polypropylene.The selection of these masks was based on various factors, including their availability, cost, and effectiveness in filtering particles. To determine the release rate of microplastics, we conducted tests on surgical masks, 3D masks, and N95 masks. Table 1 shows the characteristics of selected mask brands.
MPs release test
To determine the amount of microplastics released, we first weighed the selected masks using a digital scale. The specimens were subsequently submerged in 200 mL of deionized distilled water that had been filtered through a 0.45 μm cellulose ester membrane. The reaction mixture was stirred using a magnetic stirrer at a speed of 220 rpm for 24 h. After the reaction time, the mask was removed using clean tweezers. The surface of the mask was then washed with 50 ml of deionized distilled water and shaken to dislodge any remaining MP on the surface of the mask into the reaction vessel. Next, the water that contained MPs released from the mask was collected by a 0.45 μm cellulose ester membrane. After completing the process, the cellulose ester membrane, with a pore size of 0.45 μm, was dried at 60 °C for 24 h (Chen et al. 2021; Liang et al. 2022a, 2022b).
MPs analysis
An optical microscope (Olympus CX23), equipped with a digital camera, was used to observe MPs trapped on the filter membrane and analyze their shape and color (De Falco et al. 2018; Liang et al. 2022a, b; Zhang et al. 2023).
Quality assurance and quality control
Precautions were taken during the experiment to avoid contamination. Particle-free nitrile gloves and lab coats were utilized, and glassware was thoroughly rinsed with deionized water. The water utilized in the experiment underwent filtration through a 0.45 μm filter, and the filtration device was sealed with aluminum foil to prevent contamination. An ultra-clean environment was maintained throughout the entire filtration process. Prior to the experiment, all containers and tools were cleaned using ultra-pure water. Blank controls were used to subtract any MPs detected in the experimental groups (Liang et al. 2022a).
Data analysis
A statistical analysis was conducted using SPSS version 26 to examine the differences in microplastic release among different brands and types of masks. One-way ANOVA was used for this purpose, with statistical significance set at a P-value < 0.05 (Liang 2et al. 2022a, b; Zhang et al. 2023).
Results and discussion
The unprecedented production and use of face masks has resulted in a significant influx of MPs into the environment. The adverse risks of MPs released from masks in aquatic environments deserve serious attention, as MPs cause numerous harmful effects on the environment and human health. Therefore, the contamination of microplastics from masks is a critical issue that requires further research.
MPs concentration
All three types of face masks released MPs into the water environment continuously for 24 h. The masks analyzed in this study were new and in and in an intact and unbroken state, and nose bridges and other accessories were not removed.. Therefore, the amount of MPs in our findings may be lower than what occurs in actual environmental conditions. Figure 1 indicates the percentage frequency of MPs in different types of masks. According to Fig. 1, N95 masks released the highest amount of MPs into the water environment over a 24-h period. MPs released from N95 masks, surgical masks and 3D masks were 54, 23, and 23%, respectively. N95 masks released more MPs into the water environment than 3D and surgical masks due to having multiple synthetic layers. The filter layer in N95 masks is composed of molten polypropylene, a type of extremely fine plastic fiber. When exposed to water or other environmental conditions, this layer can break down into small particles such as MPs. In contrast, 3D masks and certain types of surgical masks are made from natural materials such as cotton or cellulose, which are biodegradable and less likely to produce MPs when they decompose. However, it is important to note that not all surgical masks are made from natural materials, and some actually contain synthetic materials, such as N95 masks. Previous studies have reported that the release of MPs from both new and worn masks can range from hundreds to thousands of particles per piece per day (Chen et al. 2021; Morgana et al.2021). Environmental factors, such as weathering, exposure to light, and physical stress, can accelerate the release of MPs from mask (Saliu et al. (2021; Wang et al. 2021). Sun et al. (2021) and Rathinamoorthy and Balasaraswathi (2022 have demonstrated high emission rates of MPs from masks (Rathinamoorthy and Balasaraswathi 2022; Sun et al. 2021b). Pengfei Wu et al. (2022) reported that SMs release a higher abundance of microfibers in both aquatic and sediment environments compared to other types of masks (Wu et al. 2022). Chen et al. (2021) stated that microplastics (MPs) found in masks are the result of fiber breakage and shedding in non-woven fabrics (Chen et al. 2021).
Visual inspection of MPs
Microplastic particles were observed using an optical microscope with a 10 × lens magnification, and the results are presented in Fig. 2. The analysis revealed that the microplastics generated by masks were primarily spherical, stringy, and irregular in shape, with the stringy type being the most prevalent in this study. Also, MPs were found in various colors, such as clear, blue, black, red, green, brown, and orange. This finding is consistent with the studies conducted by Chen et al. (2021) and Sullivan et al. (2021) and Pengfei Wu et al. (2022) (Chen et al. 2021; Sullivan et al. 2021; Wu et al. 2022).
Shape of MPs
Based on the findings illustrated in Fig. 3a, the frequency of microplastic shapes was ranked as follows: filament > spherical > irregular > fragment (P-value < 0.05). According to Fig. 3a, MPs in filamentous forms were the most common, while the fragmented form was the least common. The study conducted by Peng et al. in 2017 observed that the most common forms of MPs were fibrous and irregular (Peng et al. 2017).
Color of MPs
MPs exist in clear, black, blue, gray, green, red, purple, and yellow colors in both saltwater (Courtene-Jones et al. 2017; Dai et al. 2018; Okamoto et al. 2022) and freshwater and freshwater environments (Li et al. 2018; Okamoto et al. 2022; Wu et al. 2020).
Figure 3b displays the abundance of MPs observed in various colors, including white, black, blue, green, yellow, red, and brown (P-value < 0.05). The results of this research are consistent with other similar studies (Chen et al. 2021; Liang et al. 2022a; Sullivan et al. 2021). As shown in Fig. 4b, the combination of transparent and black accounted for 60% of the total colors. Other colors such as blue, red, green, brown, and orange accounted for approximately 40% of all colors. Chen et al. (2021) reported that the majority of microplastics (MPs) found in medium-sized transparent masks originated from non-woven fabrics (Chen t al. 2021).
Effect of mask weight on the release of MPs
Figure 3c shows the amount of MPs observed in 1 g of each type of mask. According to Fig. 3c, masks from the A3 brand release more MPs than masks from other brands. The release of MPs from discarded face masks can have adverse effects on aquatic life. A single worn mask can release more than 1.5 million MPs into the aquatic environment.
Size distribution of microplastics
Figure 4 illustrates that the majority (37%) of microplastics fall within the range of 1000–5000 µm, while only 26% are in the range of 100–500 µm (P-value < 0.05). A similar study found that medium-sized microplastics (100–500 μm) were the predominant type found in both fibers and fragments of used disposable face masks. A study found that the percentage distribution of microplastics emitting different colors was nearly identical in both new and used cloth, N95, and surgical masks (Bhangare et al. 2023). A study investigated the effects of microplastics from disposable medical masks on terrestrial invertebrates. The study found that microplastics obtained from each layer of a medical mask differed in size and shape (Kokalj et al. 2022).
Conclusion
The use of face masks has resulted in a notable discharge of MPs into the environment, especially in aquatic ecosystems. The potential impact of microplastic contamination from masks on both the environment and human health is a cause for concern, and warrants further research. MPs were detected in all three types of masks examined in the study. N95 masks released the highest amount of MPs due to their synthetic material composition. The visual inspection of MPs revealed that they exist in spherical, filament, and irregular forms with varying colors. The frequency of microplastic shapes was ranked as follows: filaments were the most common, followed by spherical, irregular, and fragment shapes. Additionally, transparent, and black colors combined accounted for 60% of the total colors observed. The study also found that A3 brand masks release more MPs than other brands.
It is important to note that the quantity of MPs in the study results may be lower than what occurs in real environmental conditions because the masks examined were new and intact.
Data availability
All necessary data are included in the document.
Abbreviations
- MPs:
-
Microplastics
- SMs:
-
Surgical masks
References
Bhangare RC, Tiwari M, Ajmal PY, Rathod TD, Sahu SK (2023) Exudation of microplastics from commonly used face masks in COVID-19 pandemic. Environ Sci Pollut Res 30:35258–35268
Bonyadi Z, Maghsodian Z, Zahmatkesh M, Nasiriara J, Ramavandi B (2022) Investigation of microplastic pollution in Torghabeh River sediments, northeast of Iran. J Contam Hydrol 250:104064
Chen X, Chen X, Liu Q, Zhao Q, Xiong X, Wu C (2021) Used disposable face masks are significant sources of microplastics to the environment. Environ Pollut 285:117485
Courtene-Jones W, Quinn B, Gary SF, Mogg AOM, Narayanaswamy BE (2017) Microplastic pollution identified in deep-sea water and ingested by benthic invertebrates in the Rockall Trough, North Atlantic Ocean. Environ Pollut 231:271–280
Dai Z, Zhang H, Zhou Q, Tian Y, Chen T, Tu C, Fu C, Luo Y (2018) Occurrence of microplastics in the water column and sediment. in an inland sea affected by intensive anthropogenic activities. Environ Pollut 242:1557–1565
De Falco F, Gullo MP, Gentile G, Di Pace E, Cocca M, Gelabert L, Brouta-Agnésa M, Rovira A, Escudero R, Villalba R, Mossotti R, Montarsolo A, Gavignano S, Tonin C, Avella M (2018) Evaluation of microplastic release caused by textile washing processes of synthetic fabrics. Environ Pollut 236:916–925
Fadare OO, Okoffo ED (2020) Covid-19 face masks: a potential source of microplastic fibers in the environment. Sci Total Environ 737:140279
Geyer R, Jambeck JR, Law KL (2017) Production, use, and fate of all plastics ever made. Sci Adv 3:e1700782
Hajiouni S, Mohammadi A, Ramavandi B, Arfaeinia H, De-la-Torre GE, Tekle-Röttering A, Dobaradaran S (2022) Occurrence of microplastics and phthalate esters in urban runoff. A focus on the Persian Gulf coastline. Sci Total Environ 806:150559.
Kashfi FS, Ramavandi B, Arfaeinia H, Mohammadi A, Saeedi R, De-la-Torre GE, Dobaradaran S (2022) Occurrence and exposure assessment of microplastics in indoor dusts of buildings with different applications in Bushehr and Shiraz cities. Iran Sci Total Environ 829:154651
Khoshmanesh M, Sanati AM, Ramavandi B (2023) Co-occurrence of microplastics and organic/inorganic contaminants in organisms living in aquatic ecosystems: A review. Mar Pollut Bull 187:114563
Kokalj AJ, Dolar A, Drobne D, Škrlep L, Škapin AS, Marolt G, Nagode A, van Gestel CA (2022) Effects of microplastics from disposable medical masks on terrestrial invertebrates. J Hazard Mater 438:129440
Kwak JI, An YJ (2021) Post COVID-19 pandemic: Biofragmentation and soil ecotoxicological effects of microplastics derived from face masks. J Hazard Mater 416:126169
Li X, Chen L, Mei Q, Dong B, Dai X, Ding G, Zeng EY (2018) Microplastics in sewage sludge from the wastewater treatment plants in China. Water Res 142:75–85
Liang H, Ji Y, Ge W, Wu J, Song N, Yin Z, Chai C (2022a) Release kinetics of microplastics from disposable face masks into the aqueous environment. Sci Total Environ 816:151650
Liang H, Wang N, Liu D, Ge W, Song N, Wang F, Chai C (2022b) Release of microplastics and nanoplastics in water from disposable surgical masks after disinfection. Mar Pollut Bull 184:114184
Ma J, Chen F, Xu H, Jiang H, Liu J, Li P, Chen CC, Pan K (2021) Face masks as a source of nanoplastics and microplastics in the environment: quantification, characterization, and potential for bioaccumulation. Environ Pollut 288:117748
Maghsodian Z, Sanati AM, Ramavandi B, Ghasemi A, Sorial GA (2021) Microplastics accumulation in sediments and Periophthalmus waltoni fish, mangrove forests in southern Iran. Chemosphere 264:128543
Maghsodian Z, Sanati AM, Tahmasebi S, Shahriari MH, Ramavandi B (2022) Study of microplastics pollution in sediments and organisms in mangrove forests: A review. Environ Res 208:112725
Mirzaie F, Teymori F, Shahcheragh S, Dobaradaran S, Arfaeinia H, Kafaei R, Sahebi S, Farjadfard S, Ramavandi B (2022) Occurrence and distribution of azithromycin in wastewater treatment plants, seawater, and sediments of the northern part of the Persian Gulf around Bushehr port: A comparison with Pre-COVID 19 pandemic. Chemosphere 307:135996
Morgana S, Casentini B, Amalfitano S (2021) Uncovering the release of micro/nanoplastics from disposable face masks at times of COVID-19. J Hazard Mater 419:126507
Moshirfar M, West WB Jr, Marx DP (2020) Face Mask-Associated Ocular Irritation and Dryness. Ophthalmol Ther 9:397–400
Okamoto K, Nomura M, Horie Y, Okamura H (2022) Color preferences and gastrointestinal-tract retention times of microplastics by freshwater and marine fishes. Environ Pollut 304:119253
Peng G, Zhu B, Yang D, Su L, Shi H, Li D (2017) Microplastics in sediments of the Changjiang Estuary. China Environ Pollut 225:283–290
Prata JC, Silva ALP, Walker TR, Duarte AC, Rocha-Santos T (2020) COVID-19 pandemic repercussions on the use and management of plastics. Environ Sci Technol 54:7760–7765
Rathinamoorthy R, Balasaraswathi SR (2022) Disposable tri-layer masks and microfiber pollution—an experimental analysis on dry and wet state emission. Sci Total Environ 816:151562
Saliu F, Veronelli M, Raguso C, Barana D, Galli P, Lasagni M (2021) The release process of microfibers: from surgical face masks into the marine environment. Environ Adv 4:100042
Smereka J, Szarpak L (2020) The use of personal protective equipment in the COVID-19 pandemic era. Am J Emerg Med 38:1529–1530
Sullivan GL, Delgado-Gallardo J, Watson TM, Sarp S (2021) An investigation into the leaching of micro and nano particles and chemical pollutants from disposable face masks - linked to the COVID-19 pandemic. Water Res 196:117033
Sun J, Yang S, Zhou G-J, Zhang K, Lu Y, Jin Q, Lam PK, Leung KM, He Y (2021) Release of microplastics from discarded surgical masks and their adverse impacts on the marine copepod Tigriopus japonicus. Environ Sci Technol Lett 8:1065–1070
Vethaak AD, Leslie HA (2016) Plastic debris is a human health issue. Environ Sci Technol 50:6825–6826
Wang Z, An C, Chen X, Lee K, Zhang B, Feng Q (2021) Disposable masks release microplastics to the aqueous environment with exacerbation by natural weathering. J Hazard Mater 417:126036
Wu P, Tang Y, Dang M, Wang S, Jin H, Liu Y, Jing H, Zheng C, Yi S, Cai Z (2020) Spatial-temporal distribution of microplastics in surface water and sediments of Maozhou River within Guangdong-Hong Kong-Macao Greater Bay Area. Sci Total Environ 717:135187
Wu P, Li J, Lu X, Tang Y, Cai Z (2022) Release of tens of thousands of microfibers from discarded face masks under simulated environmental conditions. Sci Total Environ 806:150458
Zahmatkesh Anbarani M, Esmaeili Nasrabadi A, Bonyadi Z (2023) Use of Saccharomyces cerevisiae as a new technique to remove polystyrene from aqueous medium: modeling, optimization, and performance. Appl Water Sci 13:1–10
Zhang T, Zhao C, Chen X, Jiang A, You Z, Shah KJ (2023) Different weathering conditions affect the release of microplastics by masks. Environ Sci Pollut Res Int 30:66102–66112
Acknowledgements
Not applicable.
Funding
The authors would like to thank the financial support provided by the Mashhad University of Medical Sciences (Iran) through the Grant Number of 4001565.
Author information
Authors and Affiliations
Contributions
FB performed the experiments and wrote the paper; ZB wrote and edited the paper, and conceived and designed the experiments.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interests.
Ethical approval
This article does not contain any studies with human participants or animals performed by any of the authors.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Barari, F., Bonyadi, Z. Evaluation of the leaching of microplastics from discarded medical masks in aquatic environments: a case study of Mashhad city. Appl Water Sci 13, 229 (2023). https://doi.org/10.1007/s13201-023-02025-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s13201-023-02025-x