Abstract
This paper reviews the recent advances on the high-performance distributed Brillouin optical fiber sensing, which include the conventional distributed Brillouin optical fiber sensing based on backward stimulated Brillouin scattering and two other novel distributed sensing mechanisms based on Brillouin dynamic grating and forward stimulated Brillouin scattering, respectively. As for the conventional distributed Brillouin optical fiber sensing, the spatial resolution has been improved from meter to centimeter in the time-domain scheme and to millimeter in the correlation-domain scheme, respectively; the measurement time has been reduced from minute to millisecond and even to microsecond; the sensing range has reached more than 100 km. Brillouin dynamic grating can be used to measure the birefringence of a polarization-maintaining fiber, which has been explored to realize distributed measurement of temperature, strain, salinity, static pressure, and transverse pressure. More recently, forward stimulated Brillouin scattering has gained considerable interest because of its capacity to detect mechanical features of materials surrounding the optical fiber, and remarkable works using ingenious schemes have managed to realize distributed measurement, which opens a brand-new way to achieve position-resolved substance identification.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. Barrias, J. R. Casaas, and S. Villalba, “A review of distributed optical fiber sensors for civil engineering applications,” Sensors, 2016, 16(5): 748.
X. Bao and L. Chen, “Recent progress in Brillouin scattering based fiber sensors,” Sensors, 2011, 11(4): 4152–4187.
S. Diakaridia, Y. Pan, P. Xu, D. Zhou, B. Wang, L. Teng, et al., “Detecting cm-scale hot spot over 24-km-long single-mode fiber by using differential pulse pair BOTDA based on double-peak spectrum,” Optics Express, 2017, 25(15): 17727–17736.
K. Hotate and M. Tanaka, “Distributed fiber Brillouin strain sensing with 1-cm spatial resolution by correlation-based continuous-wave technique,” IEEE Photonics Technology Letters, 2002, 14(2): 179–181.
X. Bao, A. Brown, M. DeMerchant, and J. Smith, “Characterization of the Brillouin-loss spectrum of single-mode fibers by use of very short (<10-ns) pulses,” Optics Letters, 1999, 24(8): 510.
A. W. Brown, B. G. Colpitts, and K. Brown, “Distributed sensor based on dark-pulse Brillouin scattering,” IEEE Photonics Technology Letters, 17(7): 1501–1503.
K. Kishida, C. Li, and Nishiguchi, “Pulse pre-pump method for cm-order spatial resolution of BOTDA,” SPIE, 5855: 559–562.
W. Li, X. Bao, Y. Li, and L. Chen, “Differential pulse-width pair BOTDA for high spatial resolution sensing,” Optics Express, 2008, 16(26): 21616–21625.
Y. Dong, H. Zhang, L. Chen, and X. Bao, “2cm spatial-resolution and 2 km range Brillouin optical fiber sensor using a transient differential pulse pair,” Applied Optics, 2012, 51(9): 1229–1235.
A. Dominguez-Lopez, M. A. Soto, S. Martin-Lopez, L. Thevenaz, and M. Gonzalez-Herraez, “Resolving 1 million sensing points in an optimized differential time-domain Brillouin sensor,” Optics Letters, 2017, 42(10): 1903.
S. M. Foaleng, M. Tur, J. C. Beugnot, and L. Thevenaz, “High spatial and spectral resolution long-range sensing using brillouin echoes,” Journal of Lightwave Technology, 2011, 28(20): 2993–3003.
A. Zadok, Y. Antman, N. Primerov, A. Denisov, J. Sancho, and L. Thevenaz, “Random-access distributed fiber sensing laser,” Laser & Photonics Reviews, 2012, 6(5): L1–L5.
R. Cohen, Y. London, Y. Antman, and A. Zadok, “Brillouin optical correlation domain analysis with 4 millimeter resolution based on amplified spontaneous emission,” Optics Express, 2014, 22(10): 12070–12078.
D. Ba, Y. Li, X. Zhang, J. Yan, and Y. Dong, “Phase-coded Brillouin optical correlation domain analysis with 2-mm resolution based on phase-shift keying,” Optics Express, 2019, 27(25): 36197.
J. Zhang, C. Feng, M. Zhang, Y. Liu, C. Wu, and Y. Wang, “Brillouin optical correlation domain analysis based on chaotic laser with suppressed time delay signature,” Optics Express, 2018, 26(6): 6962–6972.
K. Y. Song, Z. He, and K. Hotate, “Distributed strain measurement with millimeter-order spatial resolution based on brillouin optical correlation domain analysis and beat lock-in detection scheme,” in 18th International Conference Optical Fiber Sensors, Mexico, 2006, ThC2.
H. Zhang, D. Zhou, B. Wang, C. Pang, P. Xu, T. Jiang, et al., “Recent progress in fast distributed Brillouin optical fiber sensing,” Applied Science, 2018, 8: 1820.
C. Jin, N. Guo, Y. Feng, L. Wang, H. Liang, J. Li, et al., “Scanning-free BOTDA based on ultra-fine digital optical frequency comb,” Optics Express, 2015, 23(4): 5277–5284.
J. Fang, P. Xu, Y. Dong, and W. Shieh, “Single-shot distributed Brillouin optical time domain analyzer,” Optics Express, 2017, 25(13): 15188–15198.
D. Zhou, Y. Dong, and J. Yao, “Truly distributed and ultra-fast microwave photonic fiber-optic sensor,” Journal of Lightwave Technology, 2020, 38(15): 4150–4159.
C. Jin, L. Wang, Y. Chen, N. Guo, W. Chung, H. Au, et al., “Single-measurement digital optical frequency comb based phase-detection Brillouin optical time domain analyzer,” Optics Express, 2017, 25(8): 9213–9224.
Z. Liang, J. Pan, S. Gao, Q. Sui, Y. Feng, F. Li, et al., “Spatial resolution improvement of single-shot digital optical frequency comb-based Brillouin optical time domain analysis utilizing multiple pump pulses,” Optics Letters, 2018, 43(15): 3534–3537.
R. Bernini, A. Minardo, and L. Zeni, “Dynamic strain measurement in optical fibers by stimulated Brillouin scattering,” Optics Letters, 2009, 34(17): 2613–2615.
Y. Peled, A. Motil, L. Yaron, and M. Tur, “Slope-assisted fast distributed sensing in optical fibers with arbitrary Brillouin profile,” Optics Express, 2011, 19(21): 19845–19854.
A. Motil, O. Danon, Y. Peled, and M. Tur, “Pump-power-independent double slope-assisted distributed and fast Brillouin fiber-optic sensor,” IEEE Photonics Technology Letters, 2014, 26(8): 797–800.
D. Ba, B. Wang, D. Zhou, M. Yin, Y. Dong, H. Li, et al., “Distributed measurement of dynamic strain based on multi-slope assisted fast BOTDA,” Optics Express, 2016, 24(9): 9781–9793
X. B. Tu, H. Luo, Q. Sun, X. Y. Hu, and Z. Meng, “Performance analysis of slope-assisted dynamic BOTDA based on Brillouin gain or phase-shift in optical fibers,” Journal of Optics, 2015, 17(10): 105503.
J. Urricelqui, A. Zornoza, M. Sagues, and A. Loayssa, “Dynamic BOTDA measurements based on Brillouin phase-shift and RF demodulation,” Optics Express, 2012, 20(24): 26942–26949.
D. Zhou, Y. Dong, B. Wang, T. Jiang, D. Ba, P. Xu, et al., “Slope-assisted BOTDA based on vector SBS and frequency-agile technique for wide-strain-range dynamic measurements,” Optics Express, 2017, 25(3): 1889–1902
Y. Peled, A. Motil, and M. Tur, “Fast Brillouin optical time domain analysis for dynamic sensing,” Optics Express, 2012, 20(8): 8584–8591.
D. Ba, D. Zhou, B. Wang, Z. Lu, Z. Fan, Y. Dong, et al., “Dynamic distributed Brillouin optical fiber sensing based on dual-modulation by combining single frequency modulation and frequency-agility modulation,” IEEE Photonics Technology Letters, 2017, 9(3): 1–8
Q. Chu, B. Wang, H. Wang, D. Ba, and Y. Dong, “Fast Brillouin optical time-domain analysis using frequency-agile and compressed sensing,” Optics Letters, 2020, 45(15): 4365–4368.
B. Wang, Z. Hua, C. Pang, D. Zhou, D. Ba, D. Lin, et al., “Fast Brillouin optical time-domain reflectometry based on the frequency-agile technique,” Journal of Lightwave Technology, 2020, 38(4): 946–952
D. Zhou, Y. Dong, B. Wang, C. Pang, D. Ba, H. Zhang, et al., “Single-shot BOTDA based on an optical chirp chain probe wave for distributed ultrafast measurement,” Light: Science & Applications, 2018, 7(1): 32.
Y. Dong, B. Wang, C. Pang, D. Zhou, D. Ba, H. Zhang, et al., “150 km fast BOTDA based on the optical chirp chain probe wave and Brillouin loss scheme,” Optics Letters, 2018, 43(19): 4679–4682
B. Wang, B. Fan, D. Zhou, C. Pang, Y. Li, D. Ba, et al., “High-performance optical chirp chain BOTDA by using a pattern recognition algorithm and the differential pulse-width pair technique,” Photonics Research, 2019, 7(6): 652–658.
D. Ba, B. Wang, T. Li, Y. Li, D. Zhou, and Y. Dong, “Fast Brillouin optical time-domain reflectometry using the optical chirp chain reference wave,” Optics Letters, 2020, 45(19): 5460–5463.
J. Zhang, H. Zheng, H. Wu, N. Guo, G. Yin, and T. Zhu, “Vector optical-chirp-chain Brillouin optical time-domain analyzer based on complex principal component analysis,” Optics Express, 2020, 28(20): 28831–28842.
Y. Dong and X. Bao, “Impacts of Kerr effect and fiber dispersion on long-range Brillouin optical time-domain analysis systems,” in International Conference on Optical Fiber Sensor, China, 2012, pp. 84219Z-1–84219Z-4.
K. Tai, A. Hasegawa, and A. Tomita, “Observation of modulational instability in optical fibers,” Physical Review Letters, 1986, 56(2): 135.
A. Dominguez-Lopez, X. Angulo-Vinuesa, A. Lopez-Gil, S. Martin-Lopez, and M. Gonzalez-Herraez, “Non-local effects in dual-probe-sideband Brillouin optical time domain analysis,” Optics Express, 2015, 23(8): 10341–10352.
L. Thevenaz, S. F. Mafang, and J. Lin, “Effect of pulse depletion in a Brillouin optical time-domain analysis system,” Optics Express, 2013, 21(12): 14017–14035.
Y. Dong, L. Chen, and X. Bao, “System optimization of a long-range Brillouin-loss-based distributed fiber sensor,” Applied Optics, 2010, 49(27): 5020–5025.
X. H. Jia, Y. J. Rao, L. Chen, C. Zhang, and Z. L. Ran, “Enhanced sensing performance in long distance Brillouin optical time-domain analyzer based on Raman amplification: theoretical and experimental investigation,” Journal of Lightwave Technology, 2010, 28: 1624–1630.
M. A. Soto, G. Bolognini, and F. D. Pasquale, “Optimization of long range BOTDA sensors with high resolution using first-order bi-directional Raman amplification,” Optics Express, 2011, 19(5): 4444–4457.
X. Angulo-Vinuesa, S. Martin-Lopez, J. Nuño, P. Corredera, J. D. Aniacastañon, L. Thévenaz, et al., “Raman-assisted Brillouin distributed temperature sensor over 100 km featuring 2 m resolution and 1.2 °C uncertainty,” Journal of Lightwave Technology, 2012, 30(8):1060–1065
Y. Dong, L. Chen, and X. Bao, “Time-division multiplexing-based BOTDA over 100km sensing length,” Optics Letters, 2011, 36(2): 277–279.
Y. Dong, L. Chen, and X. Bao, “Extending the sensing range of Brillouin optical time-domain analysis combining frequency-division multiplexing and in-line EDFAs,” Journal of Lightwave Technology, 2012, 30(8): 1161–1167.
A. M. Soto, G. Bolognini, F. D. Pasquale, and L. Thévenaz, “Simplex-coded BOTDA fiber sensor with 1 m spatial resolution over a 50 km range,” Optics Letters, 2010, 35(2): 259–261.
A. M. Soto, G. Bolognini, and F. D. Pasquale, “Long-range simplex-coded BOTDA sensor over 120 km distance employing optical preamplification,” Optical Letters, 2011, 36(2): 232–234.
A. M. Soto, M. Taki, and G. Bolognini, “Simplex-coded BOTDA sensor over 120-km SMF with 1-m spatial resolution assisted by optimized bidirectional Raman amplification,” IEEE Photonics Technology Letters, 2012, 24(20): 1823–1826.
J. J. Mompó, J. Urricelqui, and A. Loayssa, “Brillouin optical time-domain analysis sensor with pump pulse amplification,” Optics Express, 2016, 24(12): 12672–12681.
M. A. Soto, J. A. Ramírez, and L. Thévenaz, “Intensifying the response of distributed optical fibre sensors using 2D and 3D image restoration,” Nature Communications, 2016, 7(1): 10870.
S. Le Floch, F. Sauser, M. Llera and E. Rochat, “Novel Brillouin optical time-domain analyzer for extreme sensing range using high-power flat frequency-coded pump pulses,” Journal of Lightwave Technology, 2014, 33(12): 2623–2627.
X. H. Jia, H. Q. Chang, K. Lin, C. Xu, and J. G. Wu, “Frequency-comb-based BOTDA sensors for high-spatial-resolution/long-distance sensing,” Optics Express, 2017, 25(6): 6997–7007.
M. A. Soto, J. A. Ramírez, and L. Thévenaz, “Optimizing image denoising for long-range Brillouin distributed fiber sensing,” Journal of Lightwave Technology, 2017, 36(4): 1168–1177.
B. Wang, L. Wang, C. Yu, and C. Lu, “Long-distance BOTDA sensing systems using video-BM3D denoising for both static and slowly varying environment,” Optics Express, 2019, 27(25): 36100–36113.
X. Sun, Z. Yang, X. Hong, S. Zaslawski, S. Wang, M. A. Soto, and L. Thévenaz, “Genetic-optimised aperiodic code for distributed optical fibre sensors,” Nature Communications, 2020, 11(1): 1–11.
Z. Zhu, D. J. Gauthier, and R. W. Boyd, “ Stored light in an optical fiber via stimulated Brillouin scattering,” Science, 2007, 318(5857): 1748–1750.
Y. Dong, L. Chen, and X. Bao, “Truly distributed birefringence measurement of polarization-maintaining fibers based on transient Brillouin grating,” Optics Letters, 2010, 35(2): 193–195.
Y. Dong, H. Zhang, Z. Lu, L. Chen, and X. Bao, “Long-Range and high-spatial-resolution distributed birefringence measurement of a polarization-maintaining fiber based on Brillouin dynamic grating,” Journal of Lightwave Technology, 2013, 31(16): 2681–2686.
Y. H. Kim and K. Y. Song, “Mapping of intermodal beat length distribution in an elliptical-core two-mode fiber based on Brillouin dynamic grating,” Optics Express, 2014, 22: 17292–17302.
Y. H. Kim and K. Y. Song, “Characterization of nonlinear temperature dependence of Brillouin dynamic grating spectra in polarization-maintaining fibers,” Journal of Lightwave Technology, 2015, 33(23): 4922–4927.
A. Li, Q. Hu, X. Chen, B. Y. Kim, and W. Shieh, “Characterization of distributed modal birefringence in a few-mode fiber based on Brillouin dynamic grating,” Optical Letters, 2014, 39: 3153–3156.
T. Jiang, D. Zhou, M. Xia, L. Teng, D. Ba, and Y. Dong, “Distributed birefringence measurement of a polarization-maintaining fiber with an extended range based on an enhanced Brillouin dynamic grating,” IEEE Photonics Journal, 2020, 12(4): 7102507.
V. P. Kalosha, W. Li, F. Wang, L. Chen, and X. Bao, “Frequency-shifted light storage via stimulated Brillouin scattering in optical fibers,” Optical Letters, 2008, 33: 2848–2850.
K. Y. Song, K. Lee, and S. B. Lee, “Tunable optical delays based on Brillouin dynamic grating in optical fibers,” Optics Express, 2009, 17(12): 10344–10349.
S. Chin and L. Thevenaz, “Tunable photonic delay lines in optical fibers,” Laser & Photonics Reviews, 2012, 6(6): 724–738.
M. Santagiustina, S. Chin, N. Primerov, L. Ursini, and L. Thevenaz, “All-optical signal processing using dynamic Brillouin gratings,” Scientific Reports, 2013, 3: 1594.
J. Sancho, N. Primerov, S. Chin, Y. Antman, A. Zadok, S. Sales, et al., “Tunable and reconfigurable multi-tap microwave photonic filter based on dynamic Brillouin gratings in fibers,” Optics Express, 2012, 20: 6157–6162.
L. Ursini and M. Santagiustina, “Applications of the dynamic Brillouin gratings to ultrawideband communications,” IEEE Photonics Technology Letters, 25(14): 1347–1349.
J. J. Guo, M. Li, Y. Deng, N. Huang, J. Liu, and N. Zhu, “Multichannel optical filters with an ultranarrow bandwidth based on sampled Brillouin dynamic gratings,” Optics Express, 2014, 22(4): 4290–4300.
Y. Dong, T. Jiang, L. Teng, H. Zhang, L. Chen, and X. Bao, “Sub-MHz ultrahigh-resolution optical spectrometry based on Brillouin dynamic gratings,” Optics Letters, 2014, 39(10): 2967–2970.
Y. Dong, L. Teng, P. Tong, T. Jiang, H. Zhang, T. Zhu, et al., “High-sensitivity distributed transverse load sensor with an elliptical-core fiber based on Brillouin dynamic gratings,” Optical Letters, 2015, 40(21): 5003–5006.
L. Teng, H. Zhang, Y. Dong, D. Zhou, T. Jiang, W. Gao, et al., “Temperature-compensated distributed hydrostatic pressure sensor with a thin-diameter polarization- maintaining photonics crystal fiber based on Brillouin dynamic gratings,” Optical Letters, 2016, 41(18): 4413–4416.
H. Zhang, L. Teng, and Y. Dong, “Distributed salinity sensor with a polyimide-coated photonics crystal fiber based on Brillouin dynamic grating,” Journal of Lightwave Technology, 2020, 99: 5219–5224.
Y. Dong, X. Bao, and L. Chen, “Distributed temperature sensing based on birefringence effect on transient Brillouin grating in a polarization-maintaining photonic crystal fiber,” Optical Letters, 2009, 34(17): 2590–2592.
Y. Dong, L. Chen, and X. Bao, “High-spatial-resolution time domain simultaneous strain and temperature sensor using Brillouin scattering and birefringence in a polarization- maintaining fiber,” IEEE Photonics Technology Letters, 2010, 22(18): 1364–1366.
K. Y. Song, S. Chin, N. Primerov, and L. Thevenaz, “Time-domain distributed fiber sensor with 1 cm spatial resolution based on Brillouin dynamic grating,” Journal of Lightwave Technology, 2010, 28(14): 2062–2067.
S. Chin, N. Primerov, and L. Thevenaz, “Sub-centimeter spatial resolution in distributed fiber sensing based on dynamic Brillouin grating in optical fibers,” IEEE Sensors Journal, 2012, 12(1): 189–194.
W. Zou, Z. He, and K. Hotate, “Demonstration of Brillouin distributed discrimination of strain and temperature using a polarization-maintaining optical fiber,” IEEE Photonics Technology Letters, 2010, 22(8): 526–528.
A. Bergman, L. Yaron, T. Langer, and M. Tur, “Dynamic and distributed slope-assisted fiber strain sensing based on optical time-domain analysis of Brillouin dynamic gratings,” Journal of Lightwave Technology, 2015, 33(12): 2611–2616.
M. Pang, X. Jiang, W. He, G. K. L. Wong, G. Onishchukov, N. Y. Joly, et al., “Stable subpicosecond soliton fiber laser passively mode-locked by gigahertz acoustic resonance in photonic crystal fiber core,” Optica, 2015, 2: 339–342.
N. T. Otterstrom, R. O. Behunin, E. A. Kittlaus, Z. Wang, and P. T. Rakich, “A silicon Brillouin laser,” Science, 2018, 360(6393): 1113–1116.
E. A. Kittlaus, N. T. Otterstrom, P. Kharel, S. Gertler, and P. T. Rakich, “Non-reciprocal interband Brillouin modulation,” Nature Photonics, 2018, 12(10): 613–619.
A. Butsch, J. R. Koehler, R. E. Noskov, and P. S. J. Russell, “CW-pumped single-pass frequency comb generation by resonant opto-mechanical nonlinearity in dual-nanoweb fiber,” Optica, 2014, 1: 158.
K. Shiraki and M. Ohashi, “Sound velocity measurement based on guided acoustic-wave Brillouin scattering,” IEEE Photonics Technology Letters, 1992, 4: 1177–1180.
Y. Tanaka and K. Ogusu, “Temperature coefficient of sideband frequencies produced by depolarized guided acoustic-wave Brillouin scattering,” IEEE Photonics Technology Letters, 1998, 10: 1769–1771.
Y. Tanaka and K. Ogusu, “Tensile-strain coefficient of resonance frequency of depolarized guided acoustic-wave Brillouin scattering,” IEEE Photonics Technology Letters, 1999, 11(7): 865–867.
Y. Antman, A. Clain, Y. London, and A. Zadok, “Opto-mechanical sensing of liquids outside standard fibers using forward stimulated Brillouin scattering,” Optica, 2016, 3(5): 510–516.
D. M. Chow, M. A. Soto, and L. Thévenaz, “Frequency-domain technique to measure the inertial response of forward stimulated Brillouin scattering for acoustic impedance sensing,” in 2017 25th Optical Fiber Sensors Conference (OFS), South Korea, 2017, pp. 10323.
G. Bashan, H. H. Diamandi, Y. London, E. Preter, and A. Zadok, “Opto-mechanical time-domain reflectometry,” Nature Communications, 2018, 9(1): 2991.
D. M. Chow, Z. Yang, M. A. Soto, and L. Thévenaz, “Distributed forward Brillouin sensor based on local light phase recovery,” Nature Communications, 2018, 9(1): 2990.
C. Pang, Z. Hua, D. Zhou, H. Zhang, L. Chen, X. Bao, et al., “Opto-mechanical time-domain analysis based on coherent forward stimulated Brillouin scattering probing,” Optica, 2020, 7(2): 176–184.
B. Wang, Y. Dong, D. Ba, and X. Bao, “High spatial resolution: an integrative review of its developments on the Brillouin optical time-and correlation-domain analysis,” Measurement Science and Technology, 2020, 31(5): 052001.
A. W. Brown, B. G. Colpitts, and K. Brown, “Dark-pulse Brillouin optical time-domain sensor with 20 mm spatial resolution,” Journal of Lightwave Technology, 2007, 25(1): 381–386.
K. Kishida and C. H. Li, “Pulse pre-pump-BOTDA technology for new generation of distributed strain measuring system,” Structural Health Monitoring and Intelligent Infrastructure, 2005, 1: 471–477.
J. C. Beugnot, M. Tur, S. F. Mafang, and L. Tevenaz, “Distributed Brillouin sensing with sub-meter spatial resolution: modeling and processing,” Optics Express, 2011, 19(8): 7381–7397.
K. Hotate and T. Hasegawa, “Measurement of Brillouin gain spectrum distribution along an optical fiber with a high spatial resolution using a novel correlation-based technique: demonstration of 45cm spatial resolution,” in 13th International Conference on Optical Fiber Sensors, Kyongju, 1999, pp. 337–340.
Y. Dong, D. Ba, T. Jiang, D. Zhou, H. Zhang, C. Zhu, et al., “High-spatial-resolution fast BOTDA for dynamic strain measurement based on differential double-pulse and second-order sideband of modulation,” IEEE Photonics Journal, 2013, 5(3): 2600407.
Acknowledgment
This work was funded by the National Key Scientific Instrument and Equipment Development Project of China (Grant No. 2017YFF0108700).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Dong, Y. High-Performance Distributed Brillouin Optical Fiber Sensing. Photonic Sens 11, 69–90 (2021). https://doi.org/10.1007/s13320-021-0616-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13320-021-0616-7