Abstract
Several civilian vehicles in China operate in urban traffic conditions and have their motor oil changed every 5,000 km. This study investigates the variations in oil properties after servicing at 5,000 km, based on systematic road tests (including a repeated test, a parallel test, and a new vehicle test). The physicochemical properties, changes in components, oxidation stability, detergent-dispersant performance, and tribological properties of motor oils were analyzed. The results showed that the total acid number (TAN) of oils increased with the operation mileage, by up to 1.41 mgKOH/g. The total base number (TBN) decreased after the road tests were completed, and the decrease was less than 44.6%. The kinematic viscosity (KV) of most oils decreased initially and then stabilized in the middle stage, before starting to increase later in the experiment. The change in KV at 100 °C was less than 15.96%. The oxidation onset temperature (OOT) of the oils diminished gradually with the operation mileage. All OOT values of the used oils were higher than 210 °C. A spot test indicated that the used oils retained their detergent-dispersant performance to an appropriate extent. The four-ball wear scar diameters and friction coefficient of the used oils did not increase significantly after the road tests were completed. This study can serve as a reference for end-users when changing motor oils.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Puckace J S, Redmon J J, Fitzgerald H, Ismail O K. Method of determining optimal change interval for a functional fluid. U.S. Patent 9 195 964, Nov. 2015.
Wei L, Duan H T, Chen S, Jia D, Qian X Z, Cheng B X, Liu J F, Li J. A field test method to quantitatively determine oxidation stability of gasoline engine oil. Lubricat Sci 30(2): 57–64 (2018)
Holmberg K, Erdemir A. Influence of tribology on global energy consumption, costs and emissions. Friction 5(3): 263–284 (2017)
Klowak M, Gracyalny G. Engine oil recirculation system for extended maintenance interval. U.S. Patent 0 053 505, Feb. 2015.
Youngk R D. Automobile engine reliability, maintainability and oil maintenance. In Proceedings of Annual Reliability and Maintainability Symposium. 2000 Proceedings. International Symposium on Product Quality and Integrity, Los Angeles, CA, USA, 2000: 94–99.
Zhu X L, Zhong C, Zhe J. Lubricating oil conditioning sensors for online machine health monitoring-A review. Tribol Int 109: 473–484 (2017)
Li J R, Wang R, Wang J Z, Li Y F. Analysis and forecasting of the oil consumption in China based on combination models optimized by artificial intelligence algorithms. Energy 144: 243–264 (2018)
Salam L B, Obayori S O, Nwaokorie F O, Suleiman A, Mustapha R. Metagenomic insights into effects of spent engine oil perturbation on the microbial community composition and function in a tropical agricultural soil. Environ Sci Pollut Res 24(8): 7139–7159 (2017)
Ramadass K, Megharaj M, Venkateswarlu K, Naidu R. Ecological implications of motor oil pollution: Earthworm survival and soil health. Soil Biol Biochem 85: 72–81 (2015)
Katiyar V, Husain S. Treatment with 1-butanol in reclamation of used oils. Orient J Chem 26(3): 1219–1221 (2010)
Thom R, Kollmann K, Warnecke W, Frend M. Extended oil drain intervals: Conservation of resources or reduction of engine life. SAE Trans 104(4): 706–718 (1995)
Schwartz E S, Smolenski D J, Wisehart A J, Nguyen T N. Automatic engine oil change indicator system. U.S. Patent 4 742 476, May 1988.
Wolak A, Zając G. Changes in the operating characteristics of engine oils: A comparison of the results obtained with the use of two automatic devices. Measurement 113: 53–61 (2018)
Raposo H, Farinha J T, Fonseca I, Ferreira L A. Condition monitoring with prediction based on diesel engine oil analysis: A case study for urban buses. Actuators 8(1): 14 (2019)
Gołębiowski W, Wolak A, Zając G. Definition of oil change intervals based on the analysis of selected physicochemical properties of used engine oils. Combust Eng 172(1): 44–50 (2018)
Sejkorová M, Hurtová I, Glos J, Pokorný J. Definition of a motor oil change interval for high-volume diesel engines based on its current characteristics assessment. Acta Univ Agric Silvic Mendel Brun 65(2): 481–490 (2017)
Felkel Y, Dörr N, Glatz F, Varmuza K. Determination of the Total Acid Number (TAN) of used gas engine oils by IR and chemometrics applying a combined strategy for variable selection. Chemometr Intell Lab Syst 101(1): 14–22 (2010)
Kral Jr J, Konecny B, Kral J, Madac K, Fedorko G, Molnar V. Degradation and chemical change of longlife oils following intensive use in automobile engines. Measurement 50: 34–42 (2014)
Timotijevic Z, Bacevac S, Corsi S. Evaluation of oil drain interval for buses in urban traffic with respect to local operating conditions. In Proceedings of World Tribology Congress, Torino, Italy, 2013.
Booser E R. CRC Handbook of Lubrication and Tribology, Volume III: Monitoring, Materials, Synthetic Lubricants, and Applications. Scotia, NY (USA): CRC Press, 1993: 71.
China-SAC. GB/T 8028-2010, Criteria for changing of gasoline engine oil. SAC, 2011.
Rudnick L R. Summary of lubricant standard test methods and some product specifications. In Lubricant Additives: Chemistry and Applications. Rudnick L R, Ed. New York: Marcel Dekker, Inc., 2003: 599–616.
Sharma B K, Stipanovic A J. Development of a new oxidation stability test method for lubricating oils using high-pressure differential scanning calorimetry. Thermochim Acta 402(1–2): 1–18 (2003)
Zehler E R. Lubricant compositions with improved oxidation stability and service life. U.S. Patent 8 980 808, Feb. 2015.
Gaisford S. Evaluation of analytical instrumentation. Part XXV: Differential scanning Calorimetry. Anal Methods 7(4): 1240–1248 (2015)
Ahmed N S, Abdel-Hameed H S, El-Kafrawy A F, Nassar A M. Synthesis and evaluation of ashless detergent/dispersant additives for lubricating engine oil. Ind Lubricat Tribol 67(6): 622–629 (2015)
Ahmed N S, Nassar A M, Abdel-Hameed H S, El-Kafrawy A F. Preparation, characterization, and evaluation of some ashless detergent/dispersant additives for lubricating engine oil. Appl Petrochem Res 6(1): 49–58 (2016)
Qian X Z, Xiang Y L, Shang H F, Cheng B X, Zhan S P, Li J. Thermal-oxidation mechanism of dioctyl adipate base oil. Friction 4(1): 29–38 (2016)
Zulkifli N W M, Kalam M A, Masjuki H H, Shahabuddin M, Yunus R. Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester as an engine lubricant. Energy 54: 167–173 (2013)
Acknowledgements
The authors are grateful for the financial support from the National Natural Science Foundation of China (51575402) and the National Natural Science Foundation of Hunan Province of China (No. 2020JJ5217).
Author information
Authors and Affiliations
Corresponding author
Additional information
Lei WEI. He obtained his B.S. degree in 2011 from Wuhan Textile University and Ph.D. degree in 2018 from Wuhan Research Institute of Materials Protection, China. His research areas include motor oil life monitoring and oil degradation analysis.
Jian LI. He obtained his M.S. degree in 1995 from Xi’an Jiaotong University, China. He is a professor and the vice-chief engineer of Wuhan Research Institute of Materials Protection. His research interests cover the surface coating, lubricating materials, and tribological testing technology.
Rights and permissions
Open Access: This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Wei, L., Duan, H., Jin, Y. et al. Motor oil degradation during urban cycle road tests. Friction 9, 1002–1011 (2021). https://doi.org/10.1007/s40544-020-0386-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40544-020-0386-z