Abstract
Protease-activated receptors (PARs) are a unique group within the G protein-coupled receptor superfamily, orchestrating cellular responses to extracellular proteases via enzymatic cleavage, which triggers intracellular signaling pathways. Protease-activated receptor 1 (PAR1) is a key member of this family and is recognized as a critical pharmacological target for managing thrombotic disorders. In this study, we present cryo-electron microscopy structures of PAR1 in its activated state, induced by its natural tethered agonist (TA), in complex with two distinct downstream proteins, the Gq and Gi heterotrimers, respectively. The TA peptide is positioned within a surface pocket, prompting PAR1 activation through notable conformational shifts. Contrary to the typical receptor activation that involves the outward movement of transmembrane helix 6 (TM6), PAR1 activation is characterized by the simultaneous downward shift of TM6 and TM7, coupled with the rotation of a group of aromatic residues. This results in the displacement of an intracellular anion, creating space for downstream G protein binding. Our findings delineate the TA recognition pattern and highlight a distinct role of the second extracellular loop in forming β-sheets with TA within the PAR family, a feature not observed in other TA-activated receptors. Moreover, the nuanced differences in the interactions between intracellular loops 2/3 and the Gα subunit of different G proteins are crucial for determining the specificity of G protein coupling. These insights contribute to our understanding of the ligand binding and activation mechanisms of PARs, illuminating the basis for PAR1’s versatility in G protein coupling.
Similar content being viewed by others
Introduction
Protease-activated receptors (PARs) are a unique subset of G protein-coupled receptors (GPCRs) activated by proteolytic cleavage.1,2,3,4,5,6 PAR1, primarily located on platelets, endothelial cells, and smooth muscle cells,7 plays a pivotal role in regulating hemostasis and thrombosis.8,9 The increased generation of thrombin and expression of PAR1 within atherosclerotic plaques, thrombi, and post-vascular injury highlights PAR1 as a promising therapeutic target for hypercoagulable states. Initially identified as a thrombin receptor, PAR1 is transiently activated by thrombin, which cleaves the receptor, revealing a new N-terminus. The first six amino acids of this N-terminus (SFLLRN) act as a tethered agonist (TA)2 (Fig. 1a). Synthetic peptides mimicking this TA can also activate PAR1.10 Mutagenesis studies indicate that the TA occupies a superficial binding pocket10,11 to activate PAR1, yet the details of this interaction and activation process remain elusive. PAR1 activation through TA can signal through a spectrum of G proteins, including Gq/11, G12/13 and Gi.3,12,13,14 Activation through Gq/11 and G12/13 initiates platelet activation,15,16 and the engagement of Gi provokes a decrease in intracellular cyclic AMP levels, thereby fostering platelet aggregation17 (Fig. 1a). The FDA-approved small-molecule antagonist, vorapaxar, effectively and irreversibly inhibits various downstream signaling pathways of PAR1; however, its usage is limited due to the increased risk of bleeding and intracranial hemorrhage.18,19,20,21 To avoid the disadvantage of the orthosteric antagonist, an increasing number of allosteric modulators, including parmodulins and pepducins, are designed to target the intracellular domain of PAR1,22,23,24,25 with the aim of disrupting or inhibiting G protein binding. Ligands that possess the ability to selectively inhibit particular signaling pathways are of particular necessity, yet the unknown mechanisms of G protein coupling selectivity of PAR1 have posed significant challenges for drug development. Currently, only inactive structures of PAR1 and PAR2 have been reported.10,26 The lack of active structures hampers the understanding of how PARs recognize the TA, initiate activation, and bind G proteins. In this study, we present two cryo-electron microscopy (cryo-EM) structures of TA-activated PAR1 in complex with heterotrimeric Gq or Gi protein (Fig. 1b–e). The elucidated structures provide insights into the distinctive ligand recognition mode, the mechanism of receptor activation, and the basis for the G protein promiscuity and selectivity of PAR1.
Results
Cryo-EM studies of PAR1 signaling complexes
We used single-particle cryo-EM to determine the structure of PAR1 activated by the TA in complex with Gq or Gi protein, respectively. The N-terminal 41 amino acids of PAR1 were removed to unmask the TA, and the C-terminal region after helix 8 was deleted to improve receptor stability.10 Hemagglutinin (HA) signal peptide was fused into the N-terminus of PAR1, and a double maltose-binding protein (MBP) tag was introduced to the C-terminus of PAR1 to facilitate purification (Supplementary information, Fig. S1a). An engineered Gαq chimera27 was used. Gαi contains two dominant-negative mutations (G203A and A326S).28 A NanoBiT tethering strategy29 was adopted to increase the stability of the complexes (Supplementary information, Fig. S1a–c). Human PAR1, engineered Gα, rat Gβ, bovine Gγ, and scFv16 were co-expressed in Sf9 insect cells.
The structure of the TA–PAR1–Gq complex was determined with 723,778 final particles from 3,944,919 initial particles to a global resolution of 3.0 Å. The structure of the TA–PAR1–Gi complex was determined with 162,724 particles from 5,979,500 particles to a global resolution of 3.2 Å (Supplementary information, Fig. S1d–i and Table S1). We can unambiguously model the TA, most residues of PAR1 from amino acid 82–397, and Gq or Gi heterotrimer except the α-helical domain in Gα components (Supplementary information, Fig. S2). The reported positive allosteric modulator of PAR1, GB83,30,31 was added during the purification of both Gq and Gi complexes, but was not visible in the final electron density map.
The receptor assumes a typical seven transmembrane architecture in both structures, with all extracellular loop (ECL) and intracellular loop (ICL) densities being clearly distinguishable, except for ICL3 of the receptor in the TA–PAR1–Gi complex. PAR1 in both Gi and Gq complexes adopts a quite similar pose, with the all-atom root-mean-square deviation (RMSD) being 0.834 Å for the receptor. The structure of the TA–PAR1–Gq complex with a higher resolution is used for further detailed analysis of the TA-binding pocket and activation mechanism of PAR1. The linker from P48N-term to L84N-term between the TA and the N-terminus of the receptor lacks density, possibly due to its highly flexible nature. The binding of TA to the extracellular segment of the receptor results in an extended helix at the N-terminus of the receptor (Fig. 1b–e). TA is observed to insert into the receptor at a 75-degree angle relative to the membrane, and forms a parallel β-sheet with ECL2 (Fig. 2a). While the binding of TA does not induce significant rotation and outward movement of TM6, a pocket satisfying G protein binding is still present in the intracellular region.
TA binding of PAR1
Our maps revealed well-resolved densities for the native TA peptides bound within the orthosteric binding site composed of the N-terminal region, ECL2, and the seven transmembrane bundle (Fig. 2). Compared with the inactive-state structure,10 the active-state structure reveals a stretched-out density at the N-terminus (Fig. 2a), with the N-terminus forming hydrogen bonds with the TA (Fig. 2f). Similar to other peptide receptors, ECL2 forms a β hairpin structure32; L44TA-03 and L45TA-04 (the superscript numbers indicate positions within the TA) in the middle part of the TA form an additional β-sheet with L258ECL2 in ECL2 of the receptor (Fig. 2d; Supplementary information, Fig. S3a). The N-terminus of TA inserts into the receptor, with the S42TA-01 making the deepest penetration, and the following Cα chain adopting a snake-like conformation as it enters the ligand-binding pocket (Fig. 2a). The TA has a superficial binding pocket with a distance of 18.4 Å to the 6.48 position of the toggle switch residue in TM6 (Supplementary information, Fig. S3b), which is different from most class A GPCRs where agonist binding directly turns the side chain of the established toggle switch amino acid W6.48. In our model, five amino acids of TA establish stable interactions with the receptor, encompassing hydrogen bonds, hydrophobic and van der Waals interactions, and a salt bridge. Specifically, S42TA-01 forms hydrogen bonds with the main chain of H255ECL2 and the side chain of Y3376.59, as well as van der Waals interactions with the side chains of V257ECL2, L258ECL2, and Y3507.32 (Fig. 2b; Supplementary information, Fig. S3a and Table S2). F43TA-02 forms hydrogen bonds with the main chains of D256ECL2 and L258ECL2 (Fig. 2c; Supplementary information, Fig. S3a and Table S2), while L44TA-03 and L45TA-04 contribute to a β-sheet secondary structure with V257ECL2 and L258ECL2 (Fig. 2d, e; Supplementary information, Fig. S3a and Table S2). The formation of a disulfide bond between C254ECL2 and C1753.25 restricts the movement of the β-hairpin formed by T243ECL2 to C254ECL2 (Fig. 2d). Additionally, the hydrogen bond between the main chains of C254ECL2 and D256ECL2, and those between the side chain of D256ECL2 and the side chains of Y1612.63 and Y3507.32 contribute to the stability of ECL2 (Fig. 2d), ensuring the formation of the interactions between the ECL2 and the TA. Therefore, the Ala mutation of D256ECL2 significantly diminishes the potency of TA binding by 33-fold (Fig. 2g; Supplementary information, Fig. S4 and Table S3). Additionally, Y3507.32 forms van der Waals interactions with S42TA-01 and engages in π–π stacking with F43TA-02, contributing to the stability of the ECL2 position; its mutation to Ala resulted in a substantial 158-fold decrease in the potency of the TA at PAR1 (Fig. 2g; Supplementary information, Fig. S4 and Table S3). The conservation of the disulfide bond formed by C254ECL2 and C1753.25 in peptide receptors, as well as the absolute conservation of D256ECL2, Y1612.63, and Y3507.32 across the PAR family (Supplementary information, Fig. S3c), suggests a common strategy for restricting the position of ECL2 in this receptor subfamily. R46TA-05 forms hydrogen bonds with the N-terminus and a salt bridge with E3477.29, along with polar interactions with S89N-term (Fig. 2f; Supplementary information, Fig. S3a and Table S2). Mutagenesis studies of S89N-term, V257ECL2, Y3376.59, and E3477.29 have also demonstrated significant effects on agonist potency (Fig. 2g; Supplementary information, Fig. S4 and Table S3). We also investigated the functional impacts of mutations in the binding pocket on the PAR1 basal activity elicited by its tethered N-terminus, which revealed a similar pattern to that observed using synthetic peptides (Fig. 2h; Supplementary information, Table S4). However, we did observe slight differences for the F87N-termA, Y95N-termA, H255ECL2A, and H3366.58A mutants (Fig. 2h; Supplementary information, Table S4). In the functional assay using synthetic TA peptides, these four mutants exhibited no significant change in potency though decreased efficacy, whereas in the N-terminus activation experiment, they showed no significant change in efficacy (Fig. 2g, h; Supplementary information, Tables S3, S4). Previous NMR structural study of PAR1 S42TA-01–S103N-term segment revealed interactions between the TA and the N-terminal residues P85N-term–S89N-term.33 The presence of this additional TA-binding site suggests that the binding of TA to the receptor likely initiates at an upper position on the N-terminus of the receptor before proceeding into the final deeper binding pocket. Furthermore, the structures of TA-activated PAR2, PAR3, and PAR4 were predicted using our determined active PAR1 as a homologue template. The predicted structures demonstrate that LTA-02–ITA-03–GTA-04 in PAR2, GTA-04–ATA-05 in PAR3 and PTA-02–GTA-03 in PAR4 (Supplementary information, Fig. S3c) all exhibit potential for forming a β-sheet, indicating a potentially shared mechanism for TA–ECL2 interactions within the PAR family and revealing a common TA binding mode of the PAR receptors.
The adhesion GPCRs (aGPCRs) are also known to be activated by a TA called the Stachel sequence, which becomes exposed through either autoproteolysis or mechanical force. The TA of aGPCRs typically comprises 15 conserved amino acids,34,35,36,37,38,39 exceeding the length of the TA for the PAR family. The amino acid at the C-terminal end of the Stachel sequence is directly associated with the extracellular N-terminal end of TM1 in aGPCRs,34,35,36,37,38,39 whereas a substantial linker of 50 amino acids exists between the TA and TM1 in PAR1. The intramolecular interactions formed between the Stachel sequence of aGPCRs and their receptors involve a greater extent of the transmembrane domain (TMD), particularly TM2, TM3, TM5, TM6, and TM7,34,35,36,37,38,39 resulting in a 16-Å deeper binding position compared to PAR1 (Supplementary information, Fig. S5a). When the Stachel sequence binds to aGPCR, it adopts an α-helical conformation (Supplementary information, Fig. S5a), whereas the TA of PAR1 forms a sheet. Hence, aGPCRs possess a wide, U-shaped binding pocket,34,35,36,37,38,39 whereas PAR1 features an elongated pocket (Supplementary information, Fig. S5a). The TA of PAR1 is predominantly positively charged, establishing strong electrostatic attraction with negatively charged regions such as ECL2 on the receptor (Supplementary information, Fig. S5b). In contrast, the lower rim of the Stachel sequence in aGPCRs primarily relies on hydrophobic interactions to firmly bind the receptor34,35,36,37,38,39 (Supplementary information, Fig. S5b, c). These distinct features highlight a novel, superficial β-sheet conformation of the TA in PARs, which contrasts with the deeply embedded α-helical conformation of the TA observed in aGPCRs.
Activation mechanism of PAR1
Upon superimposing the PAR1 structures in the active and inactive states, the TA–PAR1–G protein complex exhibits an elongated N-terminus and clear densities of the ICLs (Fig. 3a; Supplementary information, Fig. S2). Noteworthy conformational alterations are particularly evident in ECL2, the extracellular end of TM5, TM6 and TM7, as well as the intracellular end of TM1, TM6 and TM7 (Supplementary information, Fig. S6a, b). The activation of class A GPCRs typically results in the expansion of the cytoplasmic pocket through the displacement and rotation of TM6 on the intracellular side of the receptor to facilitate G protein binding.40,41,42 Nevertheless, this characteristic is not observed in the comparison between the active and inactive structures of PAR1. Instead, a downward slide of the TM6 and TM7 helices is established (Fig. 3a). The intracellular end of TM5 may also undergo alterations during the process of activation,43 though only minor conformational changes are revealed by structural comparison (Fig. 3a; Supplementary information, Fig. S6a, b). The comparison of the binding pockets of the TA and the antagonist vorapaxar reveals that the TA occupies a pocket shallower by 7 Å (Fig. 3b). Nevertheless, despite these disparities, the TA can induce effective propagation of the activation signal by eliciting a cascade of conformational changes in the receptor, particularly in TM6 and TM7 (Fig. 3a). Upon engagement with the TA, the downward movement of H3366.58 and Y3376.59 triggers a corresponding downward displacement of TM6 to accommodate the interaction with S42TA-01 (Fig. 3d). The insertion of F43TA-02 induces steric hindrance, leading to the repositioning of Y95N-term away from the ligand-binding pocket, consequently inducing conformational changes in the upper region of TM1 (Fig. 3c, d). Additionally, F43TA-02 exerts a downward force on Y3507.32, causing a global shift in the position of TM7 (Fig. 3c, d). The displacement of TM7 and Y3507.32 induces a sequential shift of the positions of the bulky side chains ranging from Y3537.35, F2715.39, Y1833.33, F1823.32 to M1863.36, ultimately resulting in the shift of I1903.40 (Fig. 3d). This cascade of events transmits the activation signal to the connector region which is contiguous to the G protein-binding interface and consists of the P5.50I3.40F6.44 motif, D7.49P7.50xxY7.53 motif, and D3.49R3.50F3.51 motif (Supplementary information, Fig. S6c–e). Mutations of these residues substantially hindered the activation of PAR1 and disrupted G protein signaling (Fig. 3g; Supplementary information, Table S5).
Notably, in the structure of the inactive PAR1 (PDB: 3VW710), there is an anion that is stabilized by the surrounding basic residues K1352.37, R2003.50 and K3076.29, potentially impeding the binding of the G protein. Upon receptor activation, the side chains of these basic residues undergo substantial conformational changes (Fig. 3e), disrupting the stabilization of the anion in the intracellular pocket and allowing the binding of the α5 helix of the G protein. Mutations of these residues significantly hampered G protein signaling44 (Supplementary information, Tables S6 and S7). The residues involved in the activation signal transduction are highly conserved within the PAR family (Fig. 3f; Supplementary information, Fig. S6f), suggesting that this unconventional activation mechanism may be embraced by other receptors in this family. It is noteworthy that the substitution of the residues at positions 3.32, 3.40 and 6.44 with less bulky residues in PAR4 (Fig. 3f) may hamper the effective activation of the receptor, possibly contributing to its slower response in platelets.45 Together, the interactions with the TA provoke the slide of TM6 and TM7 relative to other transmembrane helices and the propagation of the activation signal by the cascade of aromatic residues, demonstrating how the TA binding at a pocket with a considerable distance from the TMD induces significant changes in PAR1.
PAR1 is closely related to purinergic receptors.46,47 Specifically, P2Y purinoceptor 1 (P2Y1R) and P2Y12R play crucial roles in the platelet thrombosis,46,47 exhibiting highly functional similarities to PAR1. However, although P2Y1R and P2Y12R exhibit similar active structures to that of PAR1, P2Y receptors follow a canonical activation mechanism of class A GPCRs, characterized by a pronounced rotation of TM5 and an outward displacement of TM6 (Supplementary information, Fig. S6g–j). This activation mechanism distinctly differs from what is observed in PAR1, highlighting divergent molecular strategies between receptor families involved in thrombotic processes.
ICL2 and ICL3 mediate G protein recognition and specificity in PAR1
PAR1 can couple with various G proteins to elicit different signals, and the precise mechanism for regulation of downstream signaling pathways remains poorly understood, which hinders the development of novel molecules to achieve selective modulation. The overall structure of the PAR1–Gq complex is similar to that of the PAR1–Gi complex (Fig. 4a). PAR1 interacts with the G protein through TM2, TM3, TM6, TM7, helix 8, ICL2, and ICL3 (Fig. 4a). The active conformation and the G protein-coupling interface of PAR1 resemble those in the CCKAR–G protein complexes (Supplementary information, Fig. S7). Moreover, in the PAR1–Gq complex, the ICL1 of PAR1 and the β16 strand of Gαq also participate in the formation of interactions (Supplementary information, Fig. S8b, c, e, f). The solvent-accessible surface area buried between PAR1 and Gαq is 1145.6 Å2, larger than 1044.3 Å2 in the PAR1–Gi complex, implying more extensive interactions between Gq and the receptor. In the Gq complex structure, the ICL3 of the receptor adopts a secondary structure of α-helix (Supplementary information, Fig. S2a), which is also observed in the CCKAR–Gq complex.48 The residue S306ICL3 engages in polar interactions with Q350H5.17 in the α5 helix of Gαq and forms two pairs of hydrogen bonds with the main chain and side chain of residue D346H5.13 in the α5 helix of Gαq (Fig. 4b; Supplementary information, Fig. S8a). In contrast, the PAR1–Gi complex exhibits insufficient density in the middle part of ICL3 of the receptor to support model building, suggesting the absence of stable interactions with other residues in this region. The side chains of K345H5.17 and D341H5.13 in the α5 helix of Gαi do not interact with S306ICL3 (Fig. 4b; Supplementary information, Fig. S8d). To validate the role of these residues in G protein binding, individual residues on ICL3 were mutated to alanine. The results of alanine screening demonstrate that the S306ICL3A mutation has the most pronounced impact on the efficacy of PAR1 coupling to Gq, reducing it by 30%, and does not have a significant effect on the coupling of Gi (Fig. 4c; Supplementary information, Fig. S9 and Tables S6, S7), indicating a significant role of S306ICL3 in Gq coupling. Furthermore, mutations of other residues on ICL3 exhibit varying degrees of impact on the efficacy of Gq signaling but do not have a substantial effect on Gi signaling (Fig. 4c; Supplementary information, Fig. S9 and Tables S6, S7), suggesting that the formation of the ICL3 helix also influences Gq signaling. In addition, distinct effects on G protein signaling were also observed upon alanine substitution in ICL2 (Fig. 4f; Supplementary information, Fig. S9 and Tables S6, S7). Mutations of M208ICL2A, L211ICL2A, and S212ICL2A exert a vital impact on the efficacy of Gq signaling, while demonstrating minimal effects on Gi binding. The M208ICL2A variant demonstrates the most pronounced difference, exhibiting a 58% reduction in Gq signaling efficacy but no difference in Gi signaling (Fig. 4f; Supplementary information, Fig. S9 and Tables S6, S7). Comparison of the two structures revealed that, despite the overall similar conformation of ICL2 (Supplementary information, Fig. S2), the PAR1–Gq structure exhibits a closer and larger hydrophobic interaction interface between ICL2 and the G protein (Fig. 4d, e). The residue at position 34.51 in ICL2, which corresponds to M208ICL2, has been extensively documented to be critical for Gq or Gs coupling49,50,51,52 but non-essential for Gi/o coupling.53,54,55 Furthermore, the ICL3 plays a pivotal role in the association of certain receptors (e.g., PAR1 and CCKAR) with Gq,48 while it contributes more significantly to Gi coupling in some other receptors, such as SSTR2,56,57 demonstrating the variable roles of ICL3 in G protein coupling. The observation that conformational changes in ICL3 have a more pronounced effect on Gq signaling than on Gi signaling may explain why parmodulins, potentially interacting with the ICL3 of PAR1, can selectively inhibit PAR1-mediated Gq signaling.24,58,59 Furthermore, the distinct roles of ICL2 in Gq and Gi coupling suggest that ICL2 could serve as a novel binding site for the development of modulators that specifically target individual G protein signaling pathways.
Discussion
The PAR family represents a unique class of GPCRs distinguished by a protease-mediated revelation of endogenous agonists. The superficial TA-binding pocket of this receptor family is characterized by ECL2 that facilitates ligand binding through a β-sheet-like interaction with the TA, stabilized by a disulfide bond between C254ECL2 and C1753.25, in conjunction with hydrogen bonds between C254ECL2, D256ECL2, Y1612.63 and Y3507.32. This configuration underscores a novel mode of TA binding distinct from that in aGPCRs.
The activation of PAR1 is not by direct alterations to the toggle switch, but through the slide of TM6 and TM7 together with the rotation of a conserved cluster of aromatic residues, representing a defining characteristic of the PAR family. These investigations have unraveled the molecular basis underlying the unique mechanism of agonist interaction and the associated conformational changes upon receptor activation within this family, providing a molecular framework for the comprehension of the physiological functions of PARs.
Structural elucidation of the two G protein-bound active states of PAR1 along with functional assays has yielded a more detailed and expansive view of the importance of the ICLs in selective G protein coupling, thereby not only facilitating the dissection of the molecular mechanisms dictating downstream signaling specificity but also supporting the rational design of precise allosteric modulators targeting the receptor’s intracellular domain. Therapeutic strategies targeting PAR1 have predominantly employed oral or intravenous routes to mitigate thrombosis and treat cardiovascular diseases. However, emerging research underlining the role of PAR1 activation in promoting wound healing,60 inflammatory responses61,62 and tumor invasion63,64 suggests novel therapeutic strategies, including the development of PAR1 agonists as topical agents for wound management, antagonists to alleviate itch,62 and a deeper investigation into the anti-tumor potential of PAR1-targeted therapies. Further research is required to investigate and broaden the therapeutic potential of PAR1 modulation in the aforementioned contexts.
Materials and methods
Construct design
An HA signal peptide was fused to the N-terminus of WT PAR1 (residues 42–397). A 15-amino acid linker (GSSGGGGSGGGGSSG) was inserted between the C-terminus of PAR1 and a LgBiT tag, followed by a TEV protease cleavage site and a double MBP tag at the C-terminus. The resulting construct is cloned into pFastBac vector (Invitrogen). The engineered Gq is derived from mini-Gs/q, two dominant negative mutations were introduced to decrease the binding ability of nucleotide; the N-terminal 1–18 amino acids and α-helical domain of human Gαi replaced the corresponding sequences of Gαq to accommodate the binding of scFv16.27 Gαi containing two dominant-negative mutations (G203A and A326S)28 was used to obtain a stable GPCR–Gi complex. Rat Gβ1 was cloned with an N-terminal His6 tag and a C-terminal 15-amino acid linker, followed by a HiBiT tag. The antibody scFv16 was cloned with an N-terminal GP67 signal peptide. All the G protein components, including bovine Gγ2 and the antibody scFv16, were cloned into the pFastBac vector, respectively.
Expression and purification of PAR1–G protein complexes
Bac-to-BacTM Baculovirus Expression System (Invitrogen) was used to generate recombinant viruses of PAR1, Gαq, Gαi, Gβ1, Gγ2, and scFv16 in Sf9 insect cells. Sf9 cells at a density of 3 × 106 cells/mL were transfected with the viruses of PAR1, Gα (Gαi or Gαq), Gβ1, Gγ2, and scFv16 at a ratio of 1:1:1:1:1 and cultured for 48 h at 27 °C. After infection, cells were collected by centrifugation, and the cell pellets were stored at −80 °C.
The cell pellets were suspended and lysed by homogenization in 20 mM HEPES, pH 7.5, 100 mM NaCl, 5 mM CaCl2, 10 mM MgCl2, and 100 μM TCEP supplemented with Protease Inhibitor Cocktail (Bimake). PAR1–G protein complexes were assembled at room temperature for 1.5 h by the addition of 10 μM GB83 (homemade) and 30 mU/mL apyrase (sigma). Then the lysate was solubilized by addition of 0.5% (w/v) n-Dodecyl-β-d-Maltopyranoside (DDM, Anatrace), 0.1% (w/v) cholesteryl hemisuccinate TRIS salt (CHS, Anatrace) for 3 h at 4 °C. The supernatant was separated by centrifugation at 30,000 rpm for 30 min and incubated with dextrin resin (Dextrin Beads 6FF, SMART Lifesciences) at 4 °C for 3 h. After incubation, the resin was loaded onto a gravity flow column and washed with 20 column volumes of buffer consisting of 20 mM HEPES, pH 7.5, 100 mM NaCl, 100 μM TCEP, 10 μM GB83, 0.05% (w/v) lauryl maltose neopentylglycol (LMNG, Anatrace), and 0.01% (w/v) CHS. After being washed, the resin was resuspended with 5 column volumes of buffer containing 20 mM HEPES, pH 7.5, 100 mM NaCl, 100 μM TCEP, 10 μM GB83, 0.03% (w/v) LMNG, 0.01% (w/v) CHS, and 0.005% (w/v) glycol-diosgenin (GDN, Anatrace) supplemented with TEV protease (homemade) to remove the C-terminal double MBP tag and incubated at 4 °C overnight. The flow-through was collected and concentrated, then loaded onto a Superdex 200 increase 10/300 column (GE Healthcare) or Superose 6 increase 10/300 column (GE Healthcare) preequilibrated with running buffer containing 20 mM HEPES, pH 7.5, 100 mM NaCl, 0.00075% (w/v) LMNG, 0.00025% (w/v) GDN, 0.00015% (w/v) CHS, and 10 μM GB83. The fractions for the monomeric complex were collected and concentrated for EM experiments.
Cryo-EM grid preparation and data collection
For the preparation of cryo-EM grids, 2.6 μL of purified complexes at ~10 mg/mL for the TA–PAR1–Gq complex and ~5.0 mg/mL for the TA–PAR1–Gi complex were applied to glow-discharged holey carbon grids (Quantifoil R1.2/1.3), respectively. The grids were vitrified in liquid ethane by Vitrobot Mark IV (FEI). Frozen grids were transferred to liquid nitrogen and stored until data collection. Cryo-EM imaging was performed on a Titan Krios (FEI) at 300 kV using a Gatan K3 summit direct electron detector with a Gatan energy filter with a slit width of 20 eV at the Center of Cryo-Electron Microscopy Research Center, Shanghai Institute of Materia Medica, Chinese Academy of Sciences (Shanghai, China). Micrographs were recorded by SerialEM software in super-resolution mode at a magnified physical pixel size of 1.071 Å, with defocus values ranging from −0.5 μm to −3.0 μm. The total exposure time was set to 3 s with intermediate frames recorded every 0.083 s, resulting in an accumulated dose of ~70 electrons per Å2 and a total of 36 frames per movie stack. A total of 5048 and 6097 movies were collected for the TA–PAR1–Gq complex and the TA–PAR1–Gi complex, respectively.
Cryo-EM data processing
The image stacks were aligned to correct for drift and beam-induced motion using MotionCor2.1.65 Contrast transfer function (CTF) parameter of each micrograph was estimated by CTFFIND4.1.66 Cryo-EM data processing was performed using RELION-3.1.0.67 For the two complexes, particle selections for 2D and 3D classifications were performed on a binned dataset with a pixel size of 1.071 Å.
For the TA–PAR1–Gq complex, the micrographs containing carbon area and severe ice contamination were discarded; auto-picking of the remained micrographs yielded 3,944,919 particles, which were subjected to 3 rounds of reference-free 2D classification to discard poorly defined particles. An initial model generated from the 2D classification-selected particles by RELION was used as a reference for 3D classifications. The particles were subjected to 2 rounds of 3D classification for the whole complex, a round of 3D classification with a mask on the receptor, and another round of 3D classification focused on the complex, resulting in one well-defined subset with 723,778 particles. The selected subset was subjected to 3D auto-refine, CTF refinement, and Bayesian polishing. The final refinement generated a map with an indicated global resolution of 3.0 Å at a Fourier shell correlation of 0.143.
For the TA–PAR1–Gi complex, the micrographs containing carbon area and severe ice contamination were discarded; auto-picking of the remained micrographs yielded 5,979,500 particles which were subjected to 3 rounds of reference-free 2D classification to discard poorly defined particles. An initial model generated from 2D classification selected particles by RELION was used as a reference for 3D classifications. The particles were subjected to 3 rounds of 3D classification for the whole complex, a round of 3D classification with a mask on the receptor, and another round of 3D classification focused on the complex, resulting in one well-defined subset with 162,724 particles. The selected subset was subjected to 3D auto-refine, CTF refinement, and Bayesian polishing. The final refinement generated a map with an indicated global resolution of 3.2 Å at a Fourier shell correlation of 0.143. Local resolution for both maps was determined using Resmap68 with half maps as input.
Model building and refinement
For the TA–PAR1–Gq complex, the initial PAR1 model was adopted from the crystal structure of human PAR1 in complex with vorapaxar (PDB: 3VW7)10 and the Gq protein model was adopted from the cryo-EM structure of the 5-HT2A–Gq protein complex (PDB: 6WHA).69 The models were docked into the density map using Chimera and manually adjusted and rebuilt in COOT70 and ISOLDE.71 Real space refinement was performed using Phenix72 programs, and the validation of model statistics was done using MolProbity.73 For the TA–PAR1–Gi complex, the refined PAR1 model in the TA–PAR1–Gq complex was used, and the Gi protein model was adopted from the cryo-EM structure of FPR2–Gi protein complex (PDB: 6OMM).74 The adopted model was built in the same way as the former complex. The final refinement statistics are provided in Supplementary information, Table S1. Structural figures were prepared with Chimera,75 ChimeraX76 and PyMOL.77
NanoBiT-G protein dissociation assay
The NanoBiT assay for the measurement of G protein activation was performed as previously described.78 In brief, HEK293T cells were plated in each well of a six-well plate at a concentration of 0.3 million/mL (3 mL per well). For the Gq protein dissociation assay, HEK293T cells were co-transfected with a plasmid mixture of 200 ng Gαq-LgBiT, 500 ng SmBiT-Gγ, 500 ng Gβ, 600 ng PAR1 receptor (1–425 amino acids) and 200 ng Ric8a by Lipofectamine 2000 (Thermo Fisher Scientific) in 200 μL of Opti-MEM (Gibco). For Gi protein dissociation assay, the mixture of plasmid transfection contains 200 ng Gαi-LgBiT, 500 ng SmBiT-Gγ, 500 ng Gβ and 600 ng PAR1 receptor (1–425 amino acids). After 1 day of transfection, cells in the six-well plate were digested and resuspended in complete medium DMEM (10% FBS, 1% antibiotic) and plated in a 96-well flat-bottomed white microplate (WHB). After 18–24 h, the cells were washed twice with D-PBS to remove cell medium and incubated in the assay buffer (HBSS containing 0.01% BSA and 5 mM HEPES, pH 7.5) containing 10 μM coelenterazine 400a (Maokangbio) at a volume of 45 μL per well for 45 min at room temperature. Baseline luminescence was measured using a luminescent microplate reader (Spark Multimode Microplate Reader, TECAN). After adding 5 μL TA peptide (amino acid sequence: SFLLRN) (10×, gradient diluted in the assay buffer), the plate was measured in a luminescent microplate reader immediately. The ligand-induced signal ratio was normalized to the baseline luminescence, and fold-change signals over vehicle treatment were used to show the G protein dissociation response. Finally, the ligand-induced signal ratio was normalized to 100% of the maximal response of WT PAR1 using a sigmoidal dose response in GraphPad Prism. For Gq protein dissociation induced by thrombin, the methods are generally the same, expect for using 2 U/well thrombin (Yeasen) instead of the TA peptide to activate the receptor.
Cell-surface enzyme-linked immunosorbent assay (ELISA)
Cell-surface expression levels of PAR1 and the mutants were determined by ELISA. The transfected cells were washed with 1× PBS and fixed with 45 μL of 4% paraformaldehyde for 10 min. Following fixation, cells were blocked with blocking buffer (1% (w/v) BSA/PBS) for 1 h at room temperature. Afterward, cells were incubated with a 1:5000 dilution of HRP-conjugated mouse anti-HA-Tag mAb (Roche) in a blocking buffer for another 0.5 h at room temperature. Then, wells were washed three times with blocking buffer and three times with 1× PBS in order. Finally, antibody binding was detected using 80 μL/well diluent SuperSignal Elisa Femto Maximum Sensitivity Substrate (Thermo Fisher Scientific). The plate was measured for luminescence (Spark Multimode Microplate Reader, TECAN). Finally, the data were normalized to 100% of the WT PAR1 using GraphPad Prism.
Statistical analysis
Statistical analyses were performed on at least three individual datasets and analyzed using the GraphPad Prism software. Bars represent differences in the calculated agonist potency (ΔpEC50 = pEC50 of mutant – pEC50 of WT) and efficacy (Δefficacy = efficacy of mutant – efficacy of WT) for each mutant relative to the WT receptor. Data shown were means ± SEM from at least three independent experiments performed in technical triplicate. NS, P ≥ 0.05, *P < 0.05, **P < 0.01, ***P < 0.001, and ****P < 0.0001 by one-way ANOVA followed by Fisher’s LSD multiple comparisons test compared with WT. For dose-response experiments, data were normalized and analyzed using nonlinear curve fitting for the log (agonist) vs response (three parameters) curves. For the comparison between Gq–protein dissociation induced by TA peptide and thrombin, data were analyzed using a two-way ANOVA followed by multiple comparisons.
Data availability
The cryo-EM maps have been deposited in the Electron Microscopy Data Bank (EMDB) under accession codes EMD-38538 (PAR1–Gq), and EMD-38539 (PAR1–Gi). The coordinates have been deposited in the Protein Data Bank (PDB) under accession codes 8XOR (PAR1–Gq), and 8XOS (PAR1–Gi).
References
Chen, J., Ishii, M., Wang, L., Ishii, K. & Coughlin, S. R. Thrombin receptor activation. Confirmation of the intramolecular tethered liganding hypothesis and discovery of an alternative intermolecular liganding mode. J. Biol. Chem. 269, 16041–16045 (1994).
Vu, T.-K. H., Hung, D. T., Wheaton, V. I. & Coughlin, S. R. Molecular cloning of a functional thrombin receptor reveals a novel proteolytic mechanism of receptor activation. Cell 64, 1057–1068 (1991).
Coughlin, S. R. Thrombin signalling and protease-activated receptors. Nature 407, 258–264 (2000).
Xu, W. F. et al. Cloning and characterization of human protease-activated receptor 4. Proc. Natl. Acad. Sci. USA 95, 6642–6646 (1998).
Ishihara, H. et al. Protease-activated receptor 3 is a second thrombin receptor in humans. Nature 386, 502–506 (1997).
Nystedt, S., Emilsson, K., Wahlestedt, C. & Sundelin, J. Molecular cloning of a potential proteinase activated receptor. Proc. Natl. Acad. Sci. USA 91, 9208–9212 (1994).
Leger, A. J., Covic, L. & Kuliopulos, A. Protease-activated receptors in cardiovascular diseases. Circulation 114, 1070–1077 (2006).
Coughlin, S. R. Protease‐activated receptors in hemostasis, thrombosis and vascular biology. J. Thromb. Haemost. 3, 1800–1814 (2005).
Nieman, M. T. Protease-activated receptors in hemostasis. Blood 128, 169–177 (2016).
Zhang, C. et al. High-resolution crystal structure of human protease-activated receptor 1. Nature 492, 387–392 (2012).
Gerszten, R. E. et al. Specificity of the thrombin receptor for agonist peptide is defined by its extracellular surface. Nature 368, 648–651 (1994).
Barr, A. J., Brass, L. F. & Manning, D. R. Reconstitution of receptors and GTP-binding regulatory proteins (G proteins) in Sf9 cells. A direct evaluation of selectivity in receptor.G protein coupling. J. Biol. Chem. 272, 2223–2229 (1997).
Offermanns, S., Laugwitz, K. L., Spicher, K. & Schultz, G. G proteins of the G12 family are activated via thromboxane A2 and thrombin receptors in human platelets. Proc. Natl. Acad. Sci. USA 91, 504–508 (1994).
Hung, D. T., Wong, Y. H., Vu, T. K. & Coughlin, S. R. The cloned platelet thrombin receptor couples to at least two distinct effectors to stimulate phosphoinositide hydrolysis and inhibit adenylyl cyclase. J. Biol. Chem. 267, 20831–20834 (1992).
Klages, B., Brandt, U., Simon, M. I., Schultz, G. & Offermanns, S. Activation of G12/G13 results in shape change and Rho/Rho-kinase-mediated myosin light chain phosphorylation in mouse platelets. J. Cell Biol. 144, 745–754 (1999).
Offermanns, S., Toombs, C. F., Hu, Y.-H. & Simon, M. I. Defective platelet activation in Gαq-deficient mice. Nature 389, 183–186 (1997).
Winitz, S. et al. Expression of a mutant Gi2 alpha subunit inhibits ATP and thrombin stimulation of cytoplasmic phospholipase A2-mediated arachidonic acid release independent of Ca2+ and mitogen-activated protein kinase regulation. J. Biol. Chem. 269, 1889–1895 (1994).
Tantry, U. S. et al. Vorapaxar in the treatment of cardiovascular diseases. Future Cardiol. 16, 373–384 (2020).
Kosoglou, T. et al. Pharmacodynamics and pharmacokinetics of the novel PAR-1 antagonist vorapaxar (formerly SCH 530348) in healthy subjects. Eur. J. Clin. Pharmacol. 68, 249–258 (2012).
Morrow, D. A. et al. Vorapaxar in the secondary prevention of atherothrombotic events. N. Engl. J. Med. 366, 1404–1413 (2012).
Chackalamannil, S. et al. Discovery of potent orally active thrombin receptor (protease activated receptor 1) antagonists as novel antithrombotic agents. J. Med. Chem. 48, 5884–5887 (2005).
Chaturvedi, M. et al. Emerging paradigm of intracellular targeting of G protein-coupled receptors. Trends Biochem. Sci. 43, 533–546 (2018).
Xu, H. & Tilley, D. G. Pepducin-mediated G protein-coupled receptor signaling in the cardiovascular system. J. Cardiovasc. Pharmacol. 80, 378–385 (2022).
Künze, G. & Isermann, B. Targeting biased signaling by PAR1: function and molecular mechanism of parmodulins. Blood 141, 2675–2684 (2023).
Michael, E., Covic, L. & Kuliopulos, A. Lipopeptide pepducins as therapeutic agents. Methods Mol. Biol. 2383, 307–333 (2022).
Cheng, R. K. Y. et al. Structural insight into allosteric modulation of protease-activated receptor 2. Nature 545, 112–115 (2017).
Yin, Y.-L. et al. Molecular basis for kinin selectivity and activation of the human bradykinin receptors. Nat. Struct. Mol. Biol. 28, 755–761 (2021).
Liu, P. et al. The structural basis of the dominant negative phenotype of the Gαi1β1γ2 G203A/A326S heterotrimer. Acta Pharmacol. Sin. 37, 1259–1272 (2016).
Duan, J. et al. Cryo-EM structure of an activated VIP1 receptor-G protein complex revealed by a NanoBiT tethering strategy. Nat. Commun. 11, 4121 (2020).
Seo, Y. et al. Novel positive allosteric modulator of protease-activated receptor 1 promotes skin wound healing in hairless mice. Br. J. Pharmacol. 178, 3414–3427 (2021).
Heo, Y. et al. GB83, an agonist of PAR2 with a unique mechanism of action distinct from Trypsin and PAR2-AP. Int. J. Mol. Sci. 23, 10631 (2022).
Woolley, M. J. & Conner, A. C. Understanding the common themes and diverse roles of the second extracellular loop (ECL2) of the GPCR super-family. Mol. Cell. Endocrinol. 449, 3–11 (2017).
Seeley, S. et al. Structural basis for thrombin activation of a protease-activated receptor: inhibition of intramolecular liganding. Chem. Biol. 10, 1033–1041 (2003).
Zhu, X. et al. Structural basis of adhesion GPCR GPR110 activation by stalk peptide and G-proteins coupling. Nat. Commun. 13, 5513 (2022).
Qian, Y. et al. Structural insights into adhesion GPCR ADGRL3 activation and Gq, Gs, Gi, and G12 coupling. Mol. Cell 82, 4340–4352.e6 (2022).
Qu, X. et al. Structural basis of tethered agonism of the adhesion GPCRs ADGRD1 and ADGRF1. Nature 604, 779–785 (2022).
Xiao, P. et al. Tethered peptide activation mechanism of the adhesion GPCRs ADGRG2 and ADGRG4. Nature 604, 771–778 (2022).
Ping, Y.-Q. et al. Structural basis for the tethered peptide activation of adhesion GPCRs. Nature 604, 763–770 (2022).
Barros-Álvarez, X. et al. The tethered peptide activation mechanism of adhesion GPCRs. Nature 604, 757–762 (2022).
Zhou, Q. et al. Common activation mechanism of class A GPCRs. Elife 8, e50279 (2019).
Manglik, A. & Kruse, A. C. Structural basis for G protein-coupled receptor activation. Biochemistry 56, 5628–5634 (2017).
Hauser, A. S. et al. GPCR activation mechanisms across classes and macro/microscales. Nat. Struct. Mol. Biol. 28, 879–888 (2021).
Zhang, P. et al. Allosteric activation of a G protein-coupled receptor with cell-penetrating receptor mimetics. J. Biol. Chem. 290, 15785–15798 (2015).
Swift, S. et al. Role of the PAR1 receptor 8th helix in signaling. J. Biol. Chem. 281, 4109–4116 (2006).
Covic, L., Gresser, A. L. & Kuliopulos, A. Biphasic kinetics of activation and signaling for PAR1 and PAR4 thrombin receptors in platelets. Biochemistry 39, 5458–5467 (2000).
Zhang, D. et al. Two disparate ligand-binding sites in the human P2Y1 receptor. Nature 520, 317–321 (2015).
Li, B. et al. Structural insights into signal transduction of the purinergic receptors P2Y1R and P2Y12R. Protein Cell 14, 382–386 (2023).
Liu, Q. et al. Ligand recognition and G-protein coupling selectivity of cholecystokinin A receptor. Nat. Chem. Biol. 17, 1238–1244 (2021).
Ding, Y. et al. Structural insights into human brain–gut peptide cholecystokinin receptors. Cell Discov. 8, 55 (2022).
Rasmussen, S. G. F. et al. Crystal structure of the β2 adrenergic receptor–Gs protein complex. Nature 477, 549–555 (2011).
Moro, O., Lameh, J., Högger, P. & Sadée, W. Hydrophobic amino acid in the i2 loop plays a key role in receptor-G protein coupling. J. Biol. Chem. 268, 22273–22276 (1993).
Duan, J. et al. Molecular basis for allosteric agonism and G protein subtype selectivity of galanin receptors. Nat. Commun. 13, 1364 (2022).
Qiao, A. et al. Structural basis of Gs and Gi recognition by the human glucagon receptor. Science 367, 1346–1352 (2020).
Chen, X. et al. Structural determinants in the second intracellular loop of the human cannabinoid CB1 receptor mediate selective coupling to Gs and Gi. Br. J. Pharmacol. 161, 1817–1834 (2010).
Krishna Kumar, K. et al. Structure of a signaling cannabinoid receptor 1-G protein complex. Cell 176, 448–458.e12 (2019).
Chen, S., Teng, X. & Zheng, S. Molecular basis for the selective G protein signaling of somatostatin receptors. Nat. Chem. Biol. 19, 133–140 (2023).
Chen, L.-N. et al. Structures of the endogenous peptide- and selective non-peptide agonist-bound SSTR2 signaling complexes. Cell Res. 32, 785–788 (2022).
Nieman, M. T. PARtitioning protease signaling. Blood 125, 1853–1855 (2015).
Aisiku, O. et al. Parmodulins inhibit thrombus formation without inducing endothelial injury caused by vorapaxar. Blood 125, 1976–1985 (2015).
Twining, S. S., Warejcka, D., Andreae, E. & Conklyn, D. Protease activated receptor 1 (PAR1) plays a role in corneal wound healing. Invest. Ophthalmol. Vis. Sci. 56, 738 (2015).
Heuberger, D. M. & Schuepbach, R. A. Protease-activated receptors (PARs): mechanisms of action and potential therapeutic modulators in PAR-driven inflammatory diseases. Thromb. J. 17, 4 (2019).
Deng, L. et al. S. aureus drives itch and scratch-induced skin damage through a V8 protease-PAR1 axis. Cell 186, 5375–5393.e25 (2023).
Tekin, C. et al. PAR1 signaling on tumor cells limits tumor growth by maintaining a mesenchymal phenotype in pancreatic cancer. Oncotarget 9, 32010–32023 (2018).
Boire, A. et al. PAR1 is a matrix metalloprotease-1 receptor that promotes invasion and tumorigenesis of breast cancer cells. Cell 120, 303–313 (2005).
Zheng, S. Q. et al. MotionCor2: anisotropic correction of beam-induced motion for improved cryo-electron microscopy. Nat. Methods 14, 331–332 (2017).
Rohou, A. & Grigorieff, N. CTFFIND4: Fast and accurate defocus estimation from electron micrographs. J. Struct. Biol. 192, 216 (2015).
Zivanov, J. et al. New tools for automated high-resolution cryo-EM structure determination in RELION-3. Elife 7, e42166 (2018).
Kucukelbir, A., Sigworth, F. J. & Tagare, H. D. Quantifying the local resolution of cryo-EM density maps. Nat. Methods 11, 63–65 (2014).
Kim, K. et al. Structure of a hallucinogen-activated Gq-coupled 5-HT2A serotonin receptor. Cell 182, 1574–1588.e19 (2020).
Emsley, P. & Cowtan, K. Coot: model-building tools for molecular graphics. Acta Crystallogr. D Biol. Crystallogr. 60, 2126–2132 (2004).
Croll, T. I. ISOLDE: a physically realistic environment for model building into low-resolution electron-density maps. Acta Crystallogr. D Struct. Biol. 74, 519–530 (2018).
Liebschner, D. et al. Macromolecular structure determination using X-rays, neutrons and electrons: recent developments in Phenix. Acta Crystallogr. Sect. Struct. Biol. 75, 861–877 (2019).
Chen, V. B. et al. MolProbity: all-atom structure validation for macromolecular crystallography. Acta Crystallogr. D Biol. Crystallogr. 66, 12–21 (2010).
Zhuang, Y. et al. Structure of formylpeptide receptor 2-Gi complex reveals insights into ligand recognition and signaling. Nat. Commun. 11, 885 (2020).
Ef, P. et al. UCSF Chimera–a visualization system for exploratory research and analysis. J. Comput. Chem. 25, 1605–1612 (2004).
Pettersen, E. F. et al. UCSF ChimeraX: structure visualization for researchers, educators, and developers. Protein Sci. 30, 70–82 (2021).
The PyMOL molecular graphics system, version 2.0 (Schrödinger, LLC, 2015).
Qin, J. et al. Molecular mechanism of agonism and inverse agonism in ghrelin receptor. Nat. Commun. 13, 300 (2022).
Acknowledgements
The cryo-EM data were collected at the Cryo-Electron Microscopy Research Center, Shanghai Institute of Materia Medica, Chinese Academy of Sciences. We thank Cheng Ma from the Core Facilities, Zhejiang University School of Medicine for technical support. Cryo‐EM specimens were examined with the help from Shenghai Chang at the Center of Cryo‐Electron Microscopy (CCEM), Zhejiang University. This project was supported by the National Natural Science Foundation of China (32371249/32100959/82322070 to C.M., 92353303/32141004 to Y.Z., 32171187 to Y.J., 82121005 to Y.J. and H.E.X., 32130022 to H.E.X.); the Ministry of Science and Technology (2019YFA050880 to Y.Z.); the “Pioneer” and “Leading Goose” R&D Program of Zhejiang (2024C03147 to Y.Z.); the Key R&D Projects of Zhejiang Province (2021C03039 to Y.Z.); the Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang (2020R01006 to Y.Z.); the Zhejiang Province Natural Science Fund for Excellent Young Scholars (LR22C050002 to C.M.); the Ministry of Science and Technology (2023YFC2306800 to C.M.); the Lingang Laboratory (LG-GG-202204-01 to Y.J. and H.E.X.); CAS Strategic Priority Research Program (XDB37030103 to H.E.X.); Shanghai Municipal Science and Technology Major Project (2019SHZDZX02 to H.E.X.); Shanghai Municipal Science and Technology Major Project (H.E.X.); the Fundamental Research Funds for the Central Universities (226-2022-00205 to Y.Z.).
Author information
Authors and Affiliations
Contributions
J.G. designed the expression constructs, optimized and purified the PAR1–Gq and PAR1–Gi complexes, prepared the cryo-EM grids, collected the cryo-EM images, performed structure determination and model building, analyzed the structures, prepared the figures, and wrote the manuscript; Y.-L.Z. prepared the constructs for functional assays, performed the cellular functional assays, and participated in figure preparation; Y.Y. participated in the cellular experiments; S.G. prepared the constructs for functional assays under the supervision by X.X.; E.Y. synthesized the small molecule; Y.J. participated in data analysis; C.M. participated in data analysis and manuscript editing; H.E.X. conceived and supervised the project; Y.Z. supervised the project, analyzed the structures, and wrote the manuscript with inputs from all co-authors.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Guo, J., Zhou, YL., Yang, Y. et al. Structural basis of tethered agonism and G protein coupling of protease-activated receptors. Cell Res (2024). https://doi.org/10.1038/s41422-024-00997-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41422-024-00997-2
- Springer Nature Singapore Pte Ltd.