Abstract
The notion of topological insulators (TIs), characterized by an insulating bulk and conducting topological surface states, can be extended to higher-order topological insulators (HOTIs) hosting gapless modes localized at the boundaries of two or more dimensions lower than the insulating bulk. In this work, by performing high-resolution angle-resolved photoemission spectroscopy (ARPES) measurements with submicron spatial and spin resolution, we systematically investigate the electronic structure and spin texture of quasi-one-dimensional (1D) HOTI candidate Bi4Br4. In contrast to the bulk-state-dominant spectra on the (001) surface, we observe gapped surface states on the (100) surface, whose dispersion and spin-polarization agree well with our ab-initio calculations. Moreover, we reveal in-gap states connecting the surface valence and conduction bands, which is a signature of the hinge states inside the (100) surface gap. Our findings provide compelling evidence for the HOTI phase of Bi4Br4. The identification of the higher-order topological phase promises applications based on 1D spin-momentum locked current in electronic and spintronic devices.
Similar content being viewed by others
Introduction
The bulk-boundary correspondence connecting the boundary modes to the bulk topology is a central paradigm of topological quantum materials1,2,3. A prime example is the three-dimensional (3D) topological insulator (TI), where two-dimensional (2D) gapless boundary modes protected by time reversal symmetry exist on the surfaces of 3D insulating bulk (Fig. 1a, left). This fundamental property is described by the Z2 topological invariants. Prominently, the concept of TI can be extended to ‘higher order’ with more elaborative classification by Z4 invariants4,5,6. By contrast to the bulk-surface correspondence in 3D TI, higher-order topological insulators (HOTIs) host gapless modes (e.g. 1D topological hinge states) at the boundaries of two or more dimensions lower than the 3D bulk (Fig. 1a, right)7,8,9,10,11. Based on the spin-momentum locked hinge states with low dimensionality and protection by nontrivial topology, HOTIs have provided significant scientific implication and application potential due to their novel properties, such as dissipationless transport, efficient charge-to-spin conversion, possession of Majorana zero modes for topological quantum computation, and possible realization of spin-triplet superconductivity12,13,14,15.
Up to date, many materials have been predicted to be HOTIs, such as Bi2-xSmxSe3, XTe2 (X = Mo, W), EuIn2As2, MnBi2nTe3n+1, and several 2D materials, et al.11,16,17,18,19,20,21,22,23,24,25,26,27,28,29. However, experimental investigations on these materials30 remain inadequate and elusive. For example, while the existence of hinge states in the single crystalline bismuth has been established by scanning tunneling spectroscopy (STM) and Josephson-interference measurements, the theoretically predicted topological electronic structure distinguishing the HOTI phase has not been observed experimentally13. The metallic property of bismuth also makes it challenging to investigate and apply the hinge states. Therefore, it is still highly demanding to experimentally search for more feasible HOTIs.
Recently, a new type of quasi-1D crystal Bi4Br4 has aroused extensive research interest in this field31,32,33,34,35,36,37,38. It crystallizes in a base-centered monoclinic structure with lattice constants a = 13.065 Å, b = 4.338 Å, c = 20. 062 Å, and β = 107.4° (space group C2/m)39,40 (Fig. 1b, c). Bi4-Br4 chains extending along the b axis form Bi4Br4 layers in the ab plane. The monolayer Bi4Br4 has been identified as a 2D quantum spin Hall (QSH) insulator with a large band gap of about 180 meV34,35,36, and bulk Bi4Br4 can be viewed as AB stacked monolayers along the c axis with the adjacent monolayers rotating 180° with respect to each other, as shown in Fig. 1b. Figure 1d presents the cross-section image measured using scanning transmission electron microscope with atomic-resolution, confirming the crystal structure and suggesting the high quality of our samples.
Results and discussion
Basic band structure of Bi4Br4
Bulk Bi4Br4 features a two-fold rotational anomaly that induces a topological crystalline insulator phase involving a higher-order bulk-boundary correspondence38,41. A pair of helical 1D gapless modes, known as hinge states, exist at the crosslines of the (001) and (100) surfaces, realizing a HOTI phase42,43. After cleavage, the sample surface naturally exposes a large number of terraces and hinges. Both the surface states and hinge states can be probed by angle-resolved photoemission spectroscopy (ARPES) with sub-micron spatial resolution (μ-ARPES or nano-ARPES)44,45,46, as schematically shown in Fig. 1e. Our ab-initio calculations reveal a nonzero Z4 topological invariant and a bulk band gap of about 180 meV near the L point, as shown in Fig. 1f34,35. According to our surface-projected calculations, there are gapped surface states emerge as two branches of linear-like bands that split along ky with an energy gap of about 25 meV on the (100) surface, in drastic contrast to the absence of surface states on the (001) surface (Fig. 1g, h).
Experimentally, non-trivial transport measurements provided clues for the facet-dependent surface states32,47, and scanning tunneling spectroscopy measurements revealed QSH edge states on monolayer steps31,33. However, despite the previous ARPES reports of trails of hinge states32 that were limited by the spatial and/or energy resolutions, direct observation of the gapped (100) surface states and the hinge states of Bi4Br4 as well as their spin textures, is still lacking, which makes the HOTI phase of Bi4Br4 tentative and inconclusive. In this work, by performing high-resolution ARPES measurements with submicron spatial and spin resolutions, we systematically investigate the electronic structure of Bi4Br4. On the (001) surface, we observe only the bulk band without evidence for surface states. On the (100) surface, remarkably, we observe gapped surface states with a large splitting related to two unpinned Dirac points42 that were not unraveled experimentally in the previous studies. We also reveal the spin-momentum locking character of the gapped (100) surface states, in good agreement with ab-initio calculations. Moreover, there exist electronic states inside the (100) surface gap, suggesting the existence of hinge states. Our results provide compelling evidence for the HOTI phase, which makes Bi4Br4 an ideal material platform for exploring the electronic properties and application potential of 1D boundary modes.
By performing synchrotron-based nano-ARPES, intrinsic electronic structures measured on both the (001) and (100) surfaces are shown in Fig. 2. Figure 2a shows the bulk Brillion zone (BZ) of Bi4Br4 and its surface projections. On the (001) surface, the Fermi surface consists of point-like features at the \(\bar{M}\) point (Fig. 2b). By contrast, there exists an extra line-like feature along \({\bar{\Gamma }}_{100}\bar{Z}\) on the (100) surface (Fig. 2c). In Fig. 2d we show the band dispersion along the chain direction in a broad energy and momentum range. We observe a hole band with the band top near EF - 0.6 eV and EF - 0.25 eV around the \({\bar{\Gamma }}_{001}\) and \(\bar{M}\) points respectively (Fig. 2e). The experimental band structures are in good agreement with the ab-initio calculations of the bulk states (Fig. 2d). For direct comparison, the band dispersions detected on the (100) surface are shown in Fig. 2f, g. While the bulk bands are similar to those measured on the (001) surface, there exist linear dispersions near EF, which lead to the quasi-1D line in the constant-energy contours in Fig. 2c. The linear bands are in good accordance with our (100) surface-projected ab-initio calculations in Fig. 1h. Based on the observations above, we identify the linear bands that only emerge on the side surface as the (100) surface states.
Characteristic electronic structure of the HOTI phase
The HOTI phase of Bi4Br4 is characterized by the gapped (100) surface states and hinge states inside the surface gap. Figure 3a shows our ab-initio calculations on a 10-layer Bi4Br4 ribbon with a width of 30 chains in the a-axis direction. Prominently, inside the surface band gap, there exist 1D topological hinge states protected by the two-fold rotational symmetry 2[010]42. Both the gapped (100) surface states and the hinge states originate from the QSH edge states of the monolayer Bi4Br4. In view of the real space, when Bi4Br4 monolayers stack along the c axis to form the bulk crystal, the QSH edge states of adjacent monolayers become non-degenerate due to the AB stacking sequence. Their quantum hybridization31,34,37 open an energy gap of tens of meV, resulting in the splitting gapped (100) surface states. Moreover, the QSH edge states at the two sides of each monolayer hybridize with those from different neighboring monolayers31,37 (Fig. 3b). As a result, only two gapless modes can survive at the hinges of bulk Bi4Br4 (red lines in Fig. 3b), which are precisely the hinge states.
To scrutinize the gapped (100) surface states and hinge states, we utilize laser-based μ-ARPES with superb energy and momentum resolutions to overcome the limitation of synchrotron-based nano-ARPES in Fig. 2 and investigate the fine electronic structure of Bi4Br4 near EF44. Prominently, we observe pivotal spectral features of the gapped surface states on the (100) surface (Fig. 3c–e), in drastic contrast to the bulk states measured on the (001) surface (Supplementary Fig. 3) but in excellent agreement with our calculation in Fig. 1h. On the one hand, both the calculated and measured valence/conduction bands of the (100) surface states present a splitting-like feature along the ky direction. On the other hand, both the measured and calculated (100) surface states exhibit a band gap although the experimental value (peak-to-peak gap of 40 meV and leading-edge gap of 28 meV) is slightly larger than the calculated one (25 meV). The band splitting and the surface gap can be observed more evidently in the stacked energy distribution curves (EDCs) of the band dispersion across the \({\bar{\Gamma }}_{100}\) point (Fig. 3f). We emphasize that neither the splitting nor the band gap of the (100) surface states has been discovered in previous ARPES studies32.
More importantly, there exist extra electronic states inside the gap of the (100) surface bands. These in-gap states can be better resolved in the ARPES spectra after deconvolution, which is a commonly used method to remove the spectral broadening effect (Fig. 3g). Notably, the dispersion of the in-gap states are clearly resolved inside the (100) surface gap, in line with the calculated hinge states in Fig. 3a. The main features above can also be observed in the constant energy contours (CECs) at different binding energies as well (Fig. 3h). Inside the gap, straight line-like spectral features are revealed near EF-15 meV, indicating the 1D characteristic of the in-gap states along the chain direction. Above or below the surface gap region, the CECs exhibit separated line-like contours, corresponding to the (100) surface states. We emphasize that our spectral measurements on the (100) surface show nice agreement with the theory of the HOTI phase of Bi4Br4. More spectroscopic evidences for the existence of in-gap states are presented in the Supplementary Information, including the direct visualization of the edge states using scanning tunneling spectroscopy (see supplementary Figs. 2, 3, and 4).
Spin texture of the surface states
The spin texture of the boundary states is a more compelling characteristic of topological quantum materials. As shown in Fig. 4a, b, our calculations of the (100) surface states show a high spin polarization along the z′ direction (see the Brillouin zone in Fig. 2a), while the spin polarization along the surface normal (x′) is much weaker and the spin polarization along the y direction is nearly zero at kz′ = 0 (see supplementary Fig. 5). The calculated spin texture of the (100) surface states is shown in Fig. 4c, d at selected binding energies. To further confirm the HOTI phase of Bi4Br4, we detect the spin textures of the gapped surface states and hinge states by performing laser-based spin-resolved μ-ARPES44 on the (100) surface of Bi4Br4. Fig. 4e, f show the measured z′- and x′-component of the spin-polarization of the band dispersion along the chain direction. The left and right branches of valence and conduction surface bands show opposite polarizations for both z′ and the surface normal (x′) components, where the spin polarization is much weaker along the surface normal direction, in good agreement with the calculated results. Fig. 4g, h shows the spin-polarized MDCs and the z′-component of the spin polarization. The experimental z′-component of the spin polarization ratio is about 40% for both the conduction and valence bands of the surface states. The experimental spin-momentum locking property of the (100) surface states is in good agreement with the ab-initio calculations48 (Fig. 4a, b).
It is worth noting that the electronic states inside the surface gap (around EF - 15 meV) show no spin-polarization in our data. While the hinge states show a spin-momentum locking property in the calculation (Supplementary Fig. 6), it is extremely challenging to resolve the spin-polarized hinge states using spin-ARPES due to their weak intensity and limited resolutions of spin-ARPES. On the other hand, spin-ARPES accumulates signals from hinge states propagating along different edges (depending on the thickness of the terraces37), which may cancel out the spin-polarization of the hinge states in spin-ARPES measurements. Nevertheless, considering the homology (QSH edge states of monolayer Bi4Br4 before stacking into bulk) of the (100) surface states and hinge states, our consistent observation of the spin texture of the side surface states also suggests the spin-momentum locking property of the in-gap hinge states.
To conclude, we present the characteristic electronic structure and spin texture of the gapped (100) surface states of Bi4Br4 together with the signature of the existence of hinge states, which provides compelling evidence for the HOTI phase of Bi4Br4. Hosting 1D gapless modes at the hinges, the system generalizes the category of topological quantum materials possessing highly directional spin currents42,49, where the 2D QSH insulators/3D weak TIs with their topological edge/surface states have widely stimulated the research interests50,51,52. We expect that our identification of the HOTI phase of Bi4Br4 will motivate further investigations on higher-order topological phases and the gapless hinge modes to pursue the promising prospect of electronic and spintronic devices.
Methods
Sample growth and characterization
High-quality Bi4Br4 single crystals were synthesized using solid-state reaction method. High-purity reagents Bi and BiBr3 powders with equal molar ratio were thoroughly mixed under Ar atmosphere and then sealed in a quartz tube under a vacuum below 1 × 10−5 mbar. The quartz tube was placed in a two-zone furnace with the temperature gradient from 558 K to 461 K for 72 h. After natural cooling down, single crystals with a size larger than 2 × 0.2 × 0.1 mm3 were nucleated at the high-temperature side of the quartz tube. X-ray diffraction measurements (Panalytical Aeris) were performed with a Cu Kα radiation source to determine the single structure of Bi4Br4 at room temperature. X-ray photoemission spectra were measured using a Scienta Omicron photoelectron spectrometer equipped with a monochromatic Al Kα1 radiation (hν = 1486.7 eV) under a high vacuum below 2 × 10−9 mbar. The samples were further characterized using the high-angle annular dark-field scanning transmission electron microscope (HAADF-STEM) measurements. A TEM lamella was first prepared using a Zeiss Crossbeam 550 FIB-SEM and then measured on a probe and image-corrected FEI Titan Themis Z microscope that is equipped with a hot-field emission gun working at 300 kV. The temperature-dependent resistivity was measured using a physical properties measurement system (PPMS, Quantum Design).
Ab-initio calculations
First-principles calculations were carried out to investigate the electronic properties and topological band character of bulk Bi4Br4 with experimental lattice parameters, using the Vienna ab-initio simulation package53. We utilized the Heyd–Scuseria–Ernzerhof hybrid functional (HSE06) to describe the exchange-correlation potential54, and set the energy cutoff of the plane-wave basis to 300 eV. To construct maximally localized Wannier functions (MLWFs) for the p-orbitals of Bi and Br atoms, we used the WANNIER90 code55 and performed the calculations on a 6 × 6 × 3 k-mesh. From these MLWFs, we built ab-initio tight-binding models to compute the electronic structures of Bi4Br4 ribbons. Additionally, we calculated the surface electronic structures and their spin polarizations by combining the ab-initio tight-binding models with surface Green functions method34,56.
Synchrotron-based nano-ARPES measurements
The nano-ARPES measurements were conducted under ultra-high vacuum (UHV) better than 1 × 10−10 mbar at the BL07U endstation of Shanghai Synchrotron Radiation Facility (SSRF). Bi4Br4 single crystals were cleaved in situ to expose (100) and (001) surfaces. The synchrotron beam was focused using a Fresnel zone plate and a spatial resolution better than 400 nm was achieved. The measurements were performed at 20 K with a photon energy of 101 eV. The data were collected with a Scienta DA30L electron analyzer. The total energy and angular resolutions were set to 35 meV and 0.2°, respectively.
Laser-based μ-ARPES measurements with spin resolution
Laser-based μ- and spin-resolved ARPES measurements were conducted at Tsinghua University44. The 7-eV laser was generated by frequency doubling in a KBBF crystal and focused by an optics lens to reach a sub-micron spatial resolution. The samples were cleaved in situ under UHV better than 5 × 10−11 mbar. The data of the (001) and (100) surfaces were directly measured on the correspondingly cleaved samples without the observation of mixed domains. The typical size of the samples is around 0.2 × 2 × 0.5 mm and the typical size of the terraces measured by micro-ARPES 2D scan is around one hundred microns along the chain direction and several microns perpendicular to the chain direction. ARPES data were collected by Scienta DA30L electron analyzer. The total energy and angular resolutions were set to 1.8 meV and 0.2°, respectively. Therefore, the energy and momentum resolution of the laser-ARPES data is much better than the synchrotron-based data. The spin-resolved data was taken by a spin detector (Ferrum detector, Focus GmbH) based on very low energy electron diffraction (VLEED) on a surface-passivated Fe/W(100) target that is attached behind the Scienta DA30L analyzer. The energy resolution of the spin-resolved measurements was about 22 meV.
Data availability
The data sets that support the findings of this study are available from the corresponding author upon request.
References
Kane, C. L. & Mele, E. J. Z2 topological order and the quantum spin Hall effect. Phys. Rev. Lett. 95, 146802 (2005).
Fu, L., Kane, C. L. & Mele, E. J. Topological insulators in three dimensions. Phys. Rev. Lett. 98, 106803 (2007).
Fu, L. & Kane, C. L. Topological insulators with inversion symmetry. Phys. Rev. B 76, 045302 (2007).
Tang, F., Po, H. C., Vishwanath, A. & Wan, X. Comprehensive search for topological materials using symmetry indicators. Nature 566, 486–489 (2019).
Vergniory, M. G. et al. A complete catalogue of high-quality topological materials. Nature 566, 480–485 (2019).
Zhang, T. et al. Catalogue of topological electronic materials. Nature 566, 475–479 (2019).
Zhang, F., Kane, C. L. & Mele, E. J. Surface state magnetization and chiral edge states on topological insulators. Phys. Rev. Lett. 110, 046404 (2013).
Langbehn, J., Peng, Y., Trifunovic, L., von Oppen, F. & Brouwer, P. W. Reflection-symmetric second-order topological insulators and superconductors. Phys. Rev. Lett. 119, 246401 (2017).
Khalaf, E. Higher-order topological insulators and superconductors protected by inversion symmetry. Phys. Rev. B 97, 205136 (2018).
Matsugatani, A. & Watanabe, H. Connecting higher-order topological insulators to lower-dimensional topological insulators. Phys. Rev. B 98, 205129 (2018).
Schindler, F. et al. Higher-order topological insulators. Sci. Adv. 4, eaat0346 (2018).
Karzig, T. et al. Scalable designs for quasiparticle-poisoning-protected topological quantum computation with Majorana zero modes. Phys. Rev. B 95, 235305 (2017).
Schindler, F. et al. Higher-order topology in bismuth. Nat. Phys. 14, 918–924 (2018).
Wu, Y., Liu, H., Liu, J., Jiang, H. & Xie, X. C. Double-frequency Aharonov-Bohm effect and non-Abelian braiding properties of Jackiw-Rebbi zero-mode. Nat. Sci. Rev. 7, 572–578 (2019).
Wang, Y., Lee, G.-H. & Ali, M. N. Topology and superconductivity on the edge. Nat. Phys. 17, 542–546 (2021).
Ezawa, M. Higher-order topological insulators and semimetals on the breathing Kagome and pyrochlore lattices. Phys. Rev. Lett. 120, 026801 (2018).
Ezawa, M. Minimal models for Wannier-type higher-order topological insulators and phosphorene. Phys. Rev. B 98, 045125 (2018).
Yue, C. et al. Symmetry-enforced chiral hinge states and surface quantum anomalous Hall effect in the magnetic axion insulator Bi2–xSmxSe3. Nat. Phys. 15, 577–581 (2019).
Xu, Y., Song, Z., Wang, Z., Weng, H. & Dai, X. Higher-order topology of the axion insulator EuIn2As2. Phys. Rev. Lett. 122, 256402 (2019).
Wang, Z., Wieder, B. J., Li, J., Yan, B. & Bernevig, B. A. Higher-order topology, monopole nodal lines, and the origin of large Fermi arcs in transition metal dichalcogenides XTe2 (X=Mo, W). Phys. Rev. Lett. 123, 186401 (2019).
Zhang, R.-X., Wu, F. & Das Sarma, S. Möbius insulator and higher-order topology in MnBi2nTe3n+1. Phys. Rev. Lett. 124, 136407 (2020).
Qian, S., Liu, C.-C. & Yao, Y. Second-order topological insulator state in hexagonal lattices and its abundant material candidates. Phys. Rev. B 104, 245427 (2021).
Chen, C. et al. Universal approach to magnetic second-order topological insulator. Phys. Rev. Lett. 125, 056402 (2020).
Lee, E., Kim, R., Ahn, J. & Yang, B.-J. Two-dimensional higher-order topology in monolayer graphdiyne. npj Quant. Mater. 5, 1 (2020).
Liu, B., Zhao, G., Liu, Z. & Wang, Z. Two-dimensional quadrupole topological insulator in γ-graphyne. Nano Lett. 19, 6492–6497 (2019).
Chen, C. et al. Graphyne as a second-order and real Chern topological insulator in two dimensions. Phys. Rev. B 104, 085205 (2021).
Park, M. J., Kim, Y., Cho, G. Y. & Lee, S. Higher-order topological insulator in twisted bilayer graphene. Phys. Rev. Lett. 123, 216803 (2019).
Liu, B. et al. Higher-order band topology in twisted Moiré superlattice. Phys. Rev. Lett. 126, 066401 (2021).
Ni, X., Huang, H. & Brédas, J.-L. Organic higher-order topological insulators: heterotriangulene-based covalent organic frameworks. J. Am. Chem. Soc. 144, 22778–22786 (2022).
Regmi, S. et al. Temperature-dependent electronic structure in a higher-order topological insulator candidate EuIn2As2. Phys. Rev. B 102, 165153 (2020).
Shumiya, N. et al. Evidence of a room-temperature quantum spin Hall edge state in a higher-order topological insulator. Nat. Mater. 21, 1111–1115 (2022).
Noguchi, R. et al. Evidence for a higher-order topological insulator in a three-dimensional material built from van der Waals stacking of bismuth-halide chains. Nat. Mater. 20, 473–479 (2021).
Yang, M. et al. Large-gap quantum spin Hall state and temperature-induced Lifshitz transition in Bi4Br4. ACS Nano 16, 3036–3044 (2022).
Zhou, J.-J., Feng, W., Liu, G.-B. & Yao, Y. Topological edge states in single-and multi-layer Bi4Br4. N. J. Phys. 17, 015004 (2015).
Zhou, J.-J., Feng, W., Liu, C.-C., Guan, S. & Yao, Y. Large-gap quantum spin Hall insulator in single layer bismuth monobromide Bi4Br4. Nano Lett. 14, 4767–4771 (2014).
Peng, X. et al. Observation of topological edge states on α-Bi4Br4 nanowires grown on TiSe2 substrates. J. Phys. Chem. Lett. 12, 10465–10471 (2021).
Yoon, C., Liu, C.-C., Min, H. & Zhang, F. Quasi-one-dimensional higher-order topological insulators. arXiv preprint arXiv:2005.14710 (2020).
Li, X. et al. Pressure-induced phase transitions and superconductivity in a quasi-1-dimensional topological crystalline insulator α-Bi4Br4. Proc. Natl Acad. Sci. USA 116, 17696–17700 (2019).
Filatova, T. G. et al. Electronic structure, galvanomagnetic and magnetic properties of the bismuth subhalides Bi4I4 and Bi4Br4. J. Solid State Chem. 180, 1103–1109 (2007).
von Benda, H., Simon, A. & Bauhofer, W. Zur Kenntnis von BiBr und BiBr1, 167. Z. Anorg. Allg. Chem. 438, 53–67 (1978).
Fang, C. & Fu, L. New classes of topological crystalline insulators having surface rotation anomaly. Sci. Adv. 5, eaat2374 (2019).
Hsu, C.-H. et al. Purely rotational symmetry-protected topological crystalline insulator-Bi4Br4. 2D Mater. 6, 031004 (2019).
Tang, F., Po, H. C., Vishwanath, A. & Wan, X. Efficient topological materials discovery using symmetry indicators. Nat. Phys. 15, 470–476 (2019).
Xu, R. et al. Development of a laser-based angle-resolved-photoemission spectrometer with sub-micrometer spatial resolution and high-efficiency spin detection. Rev. Sci. Instrum. 94, 023903 (2023).
Li, Y. et al. Observation of coexisting Dirac bands and moiré flat bands in magic‐angle twisted trilayer graphene. Adv. Mater. 34, 2205996 (2022).
Noguchi, R. et al. A weak topological insulator state in quasi-one-dimensional bismuth iodide. Nature 566, 518–522 (2019).
Zhong, J. et al. Facet-dependent electronic quantum diffusion in the high-order topological insulator Bi4Br4. Phys. Rev. Appl 17, 064017 (2022).
Lin, K.-S. et al. Spin-resolved topology and partial axion angles in three-dimensional insulators. arXiv preprint arXiv:2207.10099 (2022).
Han, J. et al. Optical bulk-boundary dichotomy in a quantum spin Hall insulator. Sci. Bull. 68, 417–423 (2023).
König, M. et al. Quantum spin Hall insulator state in HgTe quantum wells. Science 318, 766–770 (2007).
Bernevig, B. A., Hughes, T. L. & Zhang, S.-C. Quantum spin Hall effect and topological phase transition in HgTe quantum wells. Science 314, 1757–1761 (2006).
Zhong, J. et al. Towards layer-selective quantum spin hall channels in weak topological insulator Bi4Br2I2. Nat. Commun. 14, 4964 (2023).
Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab-initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).
Heyd, J., Scuseria, G. E. & Ernzerhof, M. Hybrid functionals based on a screened Coulomb potential. J. Chem. Phys. 118, 8207–8215 (2003).
Mostofi, A. A. et al. wannier90: a tool for obtaining maximally-localised Wannier functions. Comput. Phys. Commun. 178, 685–699 (2008).
Sancho, M. L., Sancho, J. L., Sancho, J. L. & Rubio, J. Highly convergent schemes for the calculation of bulk and surface Green functions. J. Phys. F 15, 851 (1985).
Acknowledgements
This work is funded by the National Key R&D Program of China (Grant No. 2022YFA1403201, 2022YFA1403100, and 2022YFA1403400) and the National Natural Science Foundation of China (No. 12274251, 12104039, 62275016, 12074021, and 12274016). L.Y. acknowledges support from the Tsinghua University Initiative Scientific Research Program and the Fund of Science and Technology on Surface Physics and Chemistry Laboratory (No. XKFZ202102). Y.C. acknowledges the support from the Oxford-ShanghaiTech collaboration project and the Shanghai Municipal Science and Technology Major Project (grant 2018SHZDZX02). Y.D. thanks for the support through the Fundamental Research Funds for the Central Universities (YWF-22-K−101).
Author information
Authors and Affiliations
Contributions
L.Y. conceived the experiments. W.Z. carried out ARPES measurements with the assistance of R.X., X.D., Y.L., K.Z., C.P., D.P., H.G., Y.L., L.X. and Z.L. Ab-initio calculations were performed by J.Z. and X.D. contributed to the preliminary DFT calculations. Single crystals were synthesized and characterized by J.H., Y.H., Y.Y., M.Y., J.Z. and Y.D. The paper was written by W.Z., L.Y. and Y.C. All authors contributed to the scientific planning and discussion.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Zhao, W., Yang, M., Xu, R. et al. Topological electronic structure and spin texture of quasi-one-dimensional higher-order topological insulator Bi4Br4. Nat Commun 14, 8089 (2023). https://doi.org/10.1038/s41467-023-43882-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-43882-z
- Springer Nature Limited
This article is cited by
-
Spin-resolved topology and partial axion angles in three-dimensional insulators
Nature Communications (2024)
-
Molecular beam epitaxy growth of topological insulator Bi4Br4 on silicon for the infrared applications
Quantum Frontiers (2024)