Abstract
When unperturbed, granular materials form stable structures that resemble the ones of other amorphous solids like metallic or colloidal glasses. Whether or not granular materials under shear have an elastic response is not known, and also the influence of particle surface roughness on the yielding transition has so far remained elusive. Here we use X-ray tomography to determine the three-dimensional microscopic dynamics of two granular systems that have different roughness and that are driven by cyclic shear. Both systems, and for all shear amplitudes Γ considered, show a cross-over from creep to diffusive dynamics, indicating that rough granular materials have no elastic response and always yield, in stark contrast to simple glasses. For the system with small roughness, we observe a clear dynamic change at Γ ≈ 0.1, accompanied by a pronounced slowing down and dynamical heterogeneity. For the large roughness system, the dynamics evolves instead continuously as a function of Γ. We rationalize this roughness dependence using the potential energy landscape of the systems: The roughness induces to this landscape a micro-corrugation with a new length scale, whose ratio over the particle size is the relevant parameter. Our results reveal the unexpected richness in relaxation mechanisms for real granular materials.
Similar content being viewed by others
Introduction
Yielding of amorphous materials is ubiquitous1,2, governing a wide range of phenomena like mechanical failure of metallic glasses3, complex rheologies of soft glasses4,5, or geophysical catastrophes6,7. A typical amorphous solid under quasistatic simple shear will deform elastically at a small strain and flow plastically beyond the yielding strain. Depending on whether the material is brittle or ductile, the stress-strain curve shows a drop or a smooth cross-over to a plateau, respectively. On the particle level, yielding is a cooperative phenomenon of local plastic events8,9, and computer simulations hint that this phenomenon shares many aspects with a first-order phase transition10,11,12. However, for real systems, the precise nature of this transition has not yet been clarified since such experiments are very challenging.
In contrast to standard glasses, for granular systems, there is at present no satisfactory understanding of yielding on the level of the particles. Theoretical arguments suggest that sheared granular solids are marginally stable, i.e., contacts between particles will change irreversibly even under a tiny applied strain, which implies that such systems have no elastic regime13. This view is at odds with experimental results which found that the stress-strain curve of granular solids under simple shear does in fact resemble the one of a glass14. One possibility to resolve this discrepancy is to consider a different type of driving, i.e., cyclic shear, since it allows to probe directly the reversibility of the particle trajectories and hence the presence of elasticity in the system. A number of computational studies have in fact used this setup to investigate the particle dynamics in soft-sphere jammed states and model glasses15,16,17,18,19,20,21,22,23,24,25,26. These works, as well as related experiments on soft glasses27,28,29,30, have indeed revealed a transition at which the motion changes from reversible (or caged) to diffusive when the cyclic shear amplitude Γ is increased, thus supporting the existence of an elastic behavior if Γ ≲ 0.1. However, these findings are in contrast with several experimental results for cyclically sheared granular materials, which display robust sub-diffusive dynamics instead of a caged regime for the values of Γ considered, i.e., 0.07 ≤ Γ ≤ 0.2631,32,33. Reversible trajectories are only found for sufficiently small Γ ≪ 0.134. The inconsistency between these studies as well as the complex dependence on the shear protocol34,35 have not been elucidated.
We note that only few of the related simulations have included friction16,35, an essential component of granular materials. Also, the connection between surface roughness and friction of granular particles has been investigated only recently36,37,38, but their influence on the particle-level relaxation dynamics remains unknown, especially considering the experimental challenges in a three-dimensional granular system39,40,41. Advancing on these points is important not only for understanding the plasticity of amorphous materials but also for developing reliable granular constitution laws42.
In the present work, we experimentally probe the microscopic dynamics of cyclically sheared granular materials in three dimensions. The two granular systems, with different particle surface roughness, show for all Γ a crossover from creep (subdiffusive) to diffusive dynamics, in stark contrast to simple glasses. A dynamic change at Γ ≈ 0.1 is clearly observed for the system with small roughness, but not for the one with large roughness. This suggests that roughness induces a micro-corrugation to the potential energy landscape that allows the activation of a novel relaxation mechanisms for granular materials.
Results
Cyclic shear experiment
We investigate experimentally a cyclically sheared granular system using an X-ray tomography technique32,33,43,44 (see Methods for details). As shown in the schematic of Fig. 1a, particles are placed in a shear cell and cyclically sheared with an amplitude Γ32,45. This design allows to accommodate the granular compaction/dilation during shear. We utilize two types of spherical beads to check the influence of surface roughness: One is acrylonitrile butadiene styrene plastic (ABS) and the other is 3D-printed (ProJet MJP 2500 Plus, 0.032 mm resolution) with a bumpy surface (BUMP), see Fig. 1b. For both cases, the system contains ≈ 14,000 50: 50 bidisperse beads of diameters 5 mm and 6 mm, and no crystallization was detected. The size of the shear cell at shear γ = 0 is 24d × 24d × 24d, where d is the diameter of the small beads, and which will be taken as the unit length. The strain rate is small so we are in quasistatic conditions with an inertia number less than 10−3 46.
Beads are initially placed in the cell, forming reproducible loose packings, and then compacted by cyclic shear until the steady state is reached (see Supplementary Fig. 1). Thus none of the presented results are affected by transient effects. Since the beads are very rigid, the obtained packings always maintain mechanical stability under gravity and slow external driving. X-ray tomography scans are taken at γ = 0 (periodicity between 1 and 10 cycles) from which we extract the microscopic structure of the system and the dynamics of the particles. The resolution in particle position is around 10−3d. For the ABS system the reported results have been obtained by averaging for each Γ over 3 − 5 independent realizations, while only one realization is used for the BUMP system. To mitigate finite size effects we exclude for the analyses the particles located closer than 4d from the boundaries.
Steady-state dynamics
The dynamics of the particles are basically isotropic, although convection (see Supplementary Fig. 2) and height dependence (see Supplementary Fig. 3) emerge very mildly due to gravity for large Γ. Hence we focus here on the dynamics in the (horizontal) x-and y-directions. Figure 2a and b present, respectively, the mean squared displacement (MSD), 〈δx2(Δn)〉, for the ABS and BUMP particles as a function of the number of cycles Δn, where δx is the average displacement in the x-or y-direction, and 〈 . 〉 denotes the average over different particles, starting configurations, and realizations. For both systems and all Γ, we find diffusive growth at large Δn and subdiffusion at small Δn. Note that for each system the subdiffusion exponent is independent of Γ, i.e., 0.65 for ABS and 0.8 for BUMP. Such a universal creep dynamics at small Δn demonstrates that our system has no caging or elastic regime, in agreement with earlier findings31,32,33. This is also confirmed by the absence of a two-step relaxation in the self-intermediate scattering function (see Supplementary Fig. 4).
In the following, we report the dynamics as a function of the accumulated strain, i.e., Δγ = 4ΔnΓ, which takes into account one part of the expected Γ-dependence of the dynamics. Figure 2c shows that the Γ-dependence of the diffusion coefficient D, obtained from the Einstein relation 〈δx2〉 = 2DΔγ, depends on the system considered: For the ABS system, D is basically constant for Γ ≲ 0.1 and starts to grow sharply beyond this threshold; for the BUMP system, D is instead simply an increasing function of Γ. Also, particles in the BUMP system diffuse faster than the ones in the ABS system for large and intermediate values of Γ, but slower at the lowest accessible strain amplitudes.
The subdiffusive dynamics have been connected with the memory in particle motions for different glassy systems31,32,47,48. We probe the existence of such memory by considering the correlation in particle displacements at consecutive intervals of length Δγ, defined as
where the denominator is for normalization. This function is thus +1 if the motion is completely reversible, and zero if there is no memory. Figure 2d and e demonstrate that M is significantly positive at small Δγ, i.e., the displacements are anti-correlated, has at small Δγ a value that is smaller for the BUMP system than for the ABS system, and decays with a Γ-dependent rate. One can expect that the crossover in the MSD is related to the vanishing memory, i.e., that the dynamics becomes Markovian. To test this idea we determine both the crossover from sub-diffusive to diffusive regime (see Supplementary Fig. 5), which defines the yielding strain Δγc, and the minimal strain ΔγM at which M(ΔγM) = 0. As shown in Fig. 2f, Δγc displays a maximum at Γ = 0.1 for the ABS system, but decays monotonically with increasing Γ for the BUMP system, compatible with the trends of D(Γ) in Fig. 2c. Moreover, ΔγM(Γ) tracks Δγc(Γ) very well. Hence one concludes that the creep dynamics is accompanied by significant memory and once the initial memory has been halved the system yields. This yielding occurs once the MSD has reached values 0.03 − 0.05d2, substantially higher than the typical cage size of hard-sphere-like systems (0.01d2 for each spatial dimension2).
These findings allow us to make a first assessment regarding the distinction in dynamics between previous simulations and our experiment, as well as the influence of granular roughness. Previous simulations of model glasses22 or soft-sphere jammed states16,17,18,20 under cyclic shear, found a pronounced caging regime for Γ ≲ 0.1 and no caging for Γ ≳ 0.1. Depending on whether the jammed system is close to the hard-particle limit15,16,18 or highly compressed17,18,20, caging at small Γ can originate from either the confining effect due to the nearest neighbors, similar to the case of a dense hard-sphere packing, or the persistent contact network. The latter case, sometimes specified as reversibility20, is however not necessary for caging. In contrast to these simulations, we find persistent sub-diffusive dynamics for all Γ at small Δγ. Our results are also different from a hard-sphere marginal glass which does show a logarithmic growth in the MSD25,49. Thus we conclude that the presence of roughness alters radically the dynamics of granular systems in that sub-diffusion is always present. Furthermore, using two different systems, we discover that if the roughness is weak the mechanical response shows a singular point at Γ ≈ 0.1 while for pronounced roughness this singularity disappears and the dynamics shows just a monotnous dependence on Γ.
Furthermore, we recall that the dynamics of granular systems depend significantly on the details of the driving protocol. For example, simulations using a fixed-volume condition have given evidence that jammed and unjammed states can coexist, resulting in a complex response as a function of both packing fraction and Γ20,35. In addition, it was found that the preparation history of a jammed state in an experimental soft particle system can alter the range of Γ in which the dynamics is reversible34. However, since our system corresponds to the hard-particle limit at a constant pressure, we expect that these earlier findings are not relevant to the interpretation of our results.
Dynamical heterogeneity
In order to obtain a deeper understanding of the relaxation of the system, we investigate the single particle-level dynamics. Figure 3 shows the distributions of the particle displacements in x-or y-direction, i.e., the self-part of the Van Hove function Gs(δx, Δγ)2, for both ABS and BUMP systems at three different Δγ. In each system, plotting Gs for different Γ as a function of the rescaled distance \({d}_{x}=| \delta x| /\sqrt{\langle \delta {x}^{2}\rangle }\) roughly results in a master curve. In contrast to thermal systems50, the shape of this curve is clearly non-Gaussian even for small Δγ (panels (a) and (d); dotted lines), and there is no clear distinction between immobile and mobile particles. So the reversible particle motion is irrelevant, which is consistent with the absence of an elastic regime as mentioned above.
As found and rationalized in ref. 32, for granular systems the Van Hove function can be described well by a Gumbel law that is related to extreme value statistics,
where λ determines the shape of the distribution and A(λ) is a normalization factor. Figure 3 shows that this law does indeed describe well the data at small and intermediate dx, i.e., dx ≲ 2 (or dx ≲ 3) for ABS (or BUMP). We find that λ = 0.57, A(λ) = 2.72 for ABS, and λ = 0.59, A(λ) = 2.64 for BUMP, i.e., the shape parameter depends only mildly on the system considered. (In ref. 32 the reported value was also close to these numbers: λ = 0.605.)
At larger dx, Gs displays a significant excess tail with respect to the Gumbel law, whose amplitude depends on Δγ and becomes weak at Δγ = 3Δγc for the BUMP system. The presence of such an excess shows that, in contrast to ref. 32, for the present systems the Gumbel law does not give a perfect description of the data at large dx. However, this distribution can still serve as a valuable reference to discuss the shape of the real data. To quantify the strength of this excess tail over the Gumbel law, we present in Fig. 4a and b the average of the ratio Gs(dx)/Gg(dx) in the range dx ∈ [3.5, 4.5] as a function of Δγ/Δγc. In general, this excess is more pronounced in the ABS system, and it decays with increasing strain for both systems. We recall that a similar trend is observed for the memory, Fig. 2d, e, which is in line with the theoretical arguments that non-Markovian processes with a significant memory give rise to a pronounced tail in the Van Hove function51. Gs(dx)/Gg(dx) shows a clear maximum at Δγ ≈ Δγc for the ABS system, while it decays basically in a continuous manner with increasing strain for the BUMP system. Also, Gs(dx)/Gg(dx) decays much faster for the BUMP system and even becomes smaller than 1, i.e., the Gaussian limit is approached faster than for the ABS system. Thus these results indicate that the ABS system with the weak surface roughness has more pronounced dynamical heterogeneities than the BUMP system.
As a direct probe of dynamical heterogeneity, we determine the spatial arrangement of the fastest particles (top 10%) and calculate the number of particles belonging to the largest connected cluster (defined via a nearest neighbor criterion). Figure 4c and d present this number f, after normalization by the total number of fast particles. One notices immediately that for both systems the Δγ-dependence of f resembles that of Gs/Gg. This observation indicates that yielding is accompanied by maximal cooperativity for the ABS system, while such an enhanced collective phenomenon is absent for the BUMP system. For the latter, the value of f is relatively high for Δγ ≲ Δγc, i.e., during the sub-diffusive regime the dynamics are strongly cooperative. We note that a random choice of 10% of the particles in the sample gives a f ≈ 0.04, well below the values we find here, demonstrating that the observed clustering is indeed significant. (See Supplementary Fig. 6 for the cluster size distribution.)
We quantify the evolution of the shape of Gs via the non-Gaussian parameter \({\alpha }_{2}(\Delta \gamma )=\langle {d}_{x}^{4}\rangle /(3{\langle {d}_{x}^{2}\rangle }^{2})-1\), shown in Fig. 5a and b47. Again, we find that for both systems α2 shows very similar trends as the ones presented in Fig. 4. From the Gumbel law one obtains α2 ≈ 0.5, which is substantially smaller than the observed α2 at small Δγ, which indicates that the exponential tail found in Gs (Fig. 3) contributes considerably to α2. The Δγ-dependence of α2 can be described well by the functional form \({\alpha }_{2}(\Delta \gamma )=B(\Gamma )\exp [-\left.{(\Delta \gamma /\Delta {\gamma }_{g}(\Gamma ))}^{\theta }\right)]\) (solid curves in Fig. 5a and b), where Δγg is the strain scale for the recovery of Gaussian dynamics and B is an amplitude, which is displayed in Fig. 5c and d. Specifically, α2 decays exponentially (θ = 1) at Δγ ≳ Δγc (i.e., after yielding) for the ABS system, while for the BUMP system, it shows a stretched exponential (θ = 0.5) behavior almost from the very beginning. For both systems Δγg closely tracks the Γ-dependence of Δγc, similar to ΔγM in Fig. 2f, i.e., a clear peak at Γ = 0.1 is observed for the ABS system. The insets present B(Γ) and further support that dynamical heterogeneity is maximal at Γ = 0.1 for ABS, while this non-monotonicity is absent for BUMP.
Our analyses of the particle-level dynamics demonstrate that particle roughness renders the granular systems significantly different from simple glass-formers in that the dynamical heterogeneities (DH) are already considerable even if the strain is small. Also, the Γ-dependence of the DH differs for the two systems: For weak roughness the strength of the DH peaks at Δγc, and this effect becomes most pronounced at Γ ≈ 0.1, while for strong roughness no such extrema is observed.
Yielding as a phase transition
The non-monotonic Γ-dependence of the yielding dynamics for the ABS system invites us to probe the details of these dynamics. Previous studies of simple sheared systems have given evidence that yielding can be interpreted as a point at which the system undergoes a dynamic phase transition10,12. While in a simple shear experiment strain completely governs the yielding dynamics, our cyclic shear setup allows to probe this phenomenon as a function of two parameters, Γ and Δγ, thus allowing us to reach a better understanding of this feature. For this, we consider as an order parameter the so-called overlap Q(Δγ) ∈ [0, 1], which measures the similarity of two configurations separated by Δγ (see Methods)10. One expects that 〈Q〉 decreases with increasing Δγ and that the shape of the distribution P(Q) allows to identify the nature of the phase transition. (Note that Q is a system averaged quantity, thus obtaining P(Q) with good precision is a substantial experimental effort and hence we did not produce this data for the BUMP system.) Figure 6a–c shows that for the ABS system P(Q) peaks close to Q = 1 if Δγ/Δγc is small, i.e., most particles have not yet moved significantly. With increasing Δγ/Δγc, the peak in P(Q) shifts to smaller Q’s before converging to the random distribution. For all Δγ considered, the width of P(Q) is significantly larger for Γ ≤ 0.1 than for Γ = 0.2. This is quantified in Fig. 6d by plotting P(Q) at Δγ = Δγc for different Γ, resulting in two master curves: A wide one for Γ ≲ 0.1 and a narrow one for Γ ≳ 0.1. The inset of Fig. 6d confirms that the standard deviation of P(Q) strongly drops at Γ ≈ 0.1. This result supplements thus the information on the Γ-dependence in Figs. 4 and 5, and demonstrates that the dynamics at yielding is more cooperative if Γ ≲ 0.1. In Fig. 6e, the Δγ-dependence of the order parameter, 〈Q〉(Δγ), shows a non-monotonic dependence on Γ, in agreement with the trend in Δγc(Γ). This non-monotonic behavior can be appreciated in the dynamic phase diagram Fig. 7a where we present Δγc as a function of Γ, and also compare it with the case for the BUMP system (panel (b)). The reasons for these dependencies on Γ and the roughness will be discussed in the following.
The simulation study of ref. 10 showed that for a simple glass-former P(Q) displays at yielding a pronounced double peak structure. This feature can be rationalized by the elasto-plastic behavior of such systems, in agreement with the caging-dynamics found if such a glass is cyclically sheared22. Since in our systems elasticity/caging is absent, the distribution P(Q) displays a single peak, whose width however strongly depends on Γ. Whether or not this behavior can be related to an underlying dynamic phase transition cannot be decided with the present quality of the data and hence this question should be addressed in future studies.
The potential energy landscape of granular systems
The above-presented observations on the dynamics can be rationalized qualitatively within the framework of the potential energy landscape (PEL) of the system, a view that has been very fruitful in the context of standard glass-forming systems52. For such systems the PEL has an exponential number of local minima separated by a distance of the order of the particle diameter d and by barriers with a height comparable with the activation energy for flow. Particle motion corresponds to the exploration of this complex landscape that can be decomposed via the barriers into basins. As shown in Fig. 8, the roughness of the particles modifies this PEL by decorating it with a multitude of additional minima and peaks, thus creating micro-basins, since roughness allows to stabilize a larger number of packings44. The distance between these micro-basins is not fixed but distributed with a characteristic size ξ which increases with roughness.
The presence of the micro-corrugation in the PEL allows the system to move even if Γ is small since Γ ⋅ d will always exceed the distance between some of the micro-basins, and hence caging is avoided. The system yields once the particle-scale PEL barriers (green curves in Fig. 8) have been crossed. Before this yielding, the system mainly explores the random micro-corrugation within one (particle-size) basin, thus giving rise to the subdiffusive dynamics, clearly visible in all cases when the MSD is small, Fig. 2a and b. That the dynamics of the two systems shows a very different Γ-dependence, can be rationalized by the reasonable assumption that for the ABS system the corrugation scale ξ is much smaller than d, Fig. 8a, while this is not the case for the BUMP system, Fig. 8b. Hence, for the former system, we observe two different regimes of dynamics which are separated at Γ ≈ 0.1, i.e., the typical basin size52, while for the BUMP system the dynamics simply evolves smoothly as a function of Γ since the difference between ξ and d is much less pronounced. This also explains why the subdiffusive exponent for the BUMP system, 0.8, is much closer to 1.0 than the 0.65 found for the ABS system.
The existence of the micro-corrugation is also the reason why we observe for both systems heterogeneous dynamics at small Δγ, Fig. 5a and b: Before yielding the system is not rattling inside a basin like a simple glass-former but instead explores the disordered micro-corrugation. For the ABS system one can distinguish two cases before yielding: For Γ ≲ 0.1, the system has to overcome a multitude of barriers that separate the micro-basins before it yields (after many cycles), resulting in a wide distribution P(Q), Fig. 6a and b. In contrast to this, the dynamics for Γ ≳ 0.1 are much less affected by the presence of these micro-basins since at each cycle the system will cross many of them, leading to a more narrow distribution P(Q), Fig. 6c. Such a Γ-dependence can be expected to be absent for the BUMP system because the condition ξ ≪ d no longer holds. For the same reason, we observe peak heterogeneity at yielding for the ABS system (Figs. 4a/c and 5), but not for the BUMP system.
Discussion
Under simple shear conditions, yielding is associated with a drop or crossover in the stress-strain curve, signaling the transition from elastic to plastic behavior. For this type of driving, the mechanical response of granular materials can be expected to be very similar to one of the thermal glass-formers since the PEL’s micro-corrugation is basically irrelevant1. In contrast to this, the cyclic shear considered here permits to investigate the highly non-trivial dynamic consequences of this micro-corrugation, such as the identified creep behavior (i.e., a pronounced sub-diffusion for all Γ) in a steady state. This creep motion can hence be considered to be a hallmark of granular materials. However, earlier simulations of smooth particles, e.g.16, did not observe the sub-diffusive dynamics. Therefore we argue that this type of dynamics is due to the PEL’s micro-corrugation which originates from the surface roughness of particles, intrinsic for real granular materials. A comparison between the ABS and BUMP systems demonstrates the significant influence of roughness on the dynamics as well as the underlying PEL, i.e., the surface roughness serves as a control parameter of the topography of the PEL and thus the nature of yielding. Further studies, in which roughness is systematically varied, will be helpful to elucidate the details of the observed creep dynamics.
In line with the creep motion, the evolution of the packing fraction during a single shear cycle displays persistent hysteresis for different Γ, see Supplementary Fig. 7, similar to the shear stress45. This is in contrast to the energy and stress of glasses which show clear reversibility for small Γ24, thus supporting the view that granular systems and glasses are different.
Our results are relevant for a multitude of situations in geoscience7, such as landslide processes which are preceded by complex external disturbances, or small tremors that will affect the long-time stability of civil engineering structures such as dams. Interestingly, a recent experiment reported the persistent creep of a sandpile without an apparent external disturbance53, which indicates that the particle-level relaxation can be triggered by multiple microscopic processes. This finding is thus in line with our results, in that we reveal the absence of caging even if Γ is very small. Hence granular materials have no well-defined stability threshold, in stark contrast to other amorphous solids.
We also mention that for simple shear it is custom to classify the yielding as either ductile or brittle. Our results show that for granular materials the nature of yielding depends strongly on the driving protocol, i.e., simple shear vs. cyclic shear, and also on the shear amplitude Γ. This dependence, which is absent in more standard disordered materials, suggests that for granular materials such a classification might not be possible. Moreover, the impact of other parameters, e.g., particle shape, on the granular dynamics is at present not known. Advancing on these points will lead to a fundamental understanding of granular rheology and thus permit to develop a new holistic view of the failure of complex materials.
Methods
Experiment
We consider two types of spherical granular beads: (1) Acrylonitrile butadiene styrene plastic (ABS) and (2) 3D-printed (ProJet MJP 2500 Plus, 0.032 mm resolution) with a bumpy surface (BUMP). Both systems are bidisperse (50:50 composition) with diameters 5 mm and 6 mm. The unit length is d = 5 mm. A BUMP particle is created by uniformly decorating the surface of a central sphere with 400 half-spheres of diameter ≈ 5%d44, shown in Fig. 1b. The corresponding random loose packing fractions are ϕRLP ≈ 0.61 for ABS and ϕRLP ≈ 0.58 for BUMP, which confirms that the BUMP particles are indeed rougher than the ABS beads.
The set-up of the cyclic shear cell is presented in Fig. 1 and described in the caption. Shear is induced by a stepper motor and the strain rate is \(\dot{\gamma } \, \approx \, 0.13\)/s, giving a dimensionless inertia number \(I=\dot{\gamma }d\sqrt{\rho /P}\approx 6\times 1{0}^{-4}\), where we estimate the pressure to be given by P ≈ ρgL and L ≈ 24d. (Here ρ is the mass density of the particles.) This value corresponds to a quasistatic shear condition46. The considered range of cyclic shear amplitudes is Γ = 0.03 − 0.25.
After the beads have been deposited in the cell (i.e., having reproducible ϕRLP), we start to shear the system with a given Γ, and the packing displays a transient compaction process, see Extended Data Fig. 1. Despite the different roughness and ϕRLP for the ABS and BUMP systems, their steady-state packing fractions are approximately the same. After a sufficient number of shear cycles, depending on Γ typically 1000−5000, we start to collect data for the steady state dynamics. These are the results presented in the main text.
X-ray tomography scans (UEG Medical Group Ltd., 0.2 mm spatial resolution) are performed periodically when the cyclic shear is completed (shearing motion is stopped). For each scan, the acquired data are analyzed using custom-made image processing codes that allow locating the center of a particle center to within 0.001d, thus constructing the 3D packing. Depending on Γ, the sampling period is between 1 and 40 cycles, ensuring unambiguous particle tracking. For a given Γ, we perform a sequence of 150−200 scans, forming a single trajectory. Each individual particle is tracked by requiring that its displacement between two consecutive scans is smaller than 0.5d. (We find that nearly all the particles can be tracked unambiguously, except for the very few near the boundary which had a slightly faster motion and errors in image processing.) We analyze the dynamics after excluding the particles within 4d from the boundary, which leaves us with 3500–4000 particles.
Overlap function
For a system with N particles the overlap function, which quantifies the similarity of two configurations (here separated by a strain Δγ), is defined as
where δxi is the particle displacement, Θ(⋅) is the Heaviside step function, and c is a preset threshold10. By definition, 0 ≤ Q ≤ 1, and Q decreases as the system moves away from its initial configuration. In practice, we divide the cubic probe space into 2 × 2 × 2 non-overlapping subsystems, each having N ≈ 500, to increase the number of measurements of Q. Then, for given Γ and Δγ, Q is sampled from different subsystems, starting configurations, x-and y-directions, as well as 3−5 independent realizations. To calculate Q we choose \(c=1.15\sqrt{\langle \delta {x}^{2}(\Delta {\gamma }_{c})\rangle }\), which makes that 〈Q(Δγc)〉 = 0.5. This threshold must be chosen to depend on Γ, since the MSD in the subdiffusive regime changes strongly with Γ, see Fig. 2a.
Data availability
The data that support the findings of this study are available from https://zenodo.org/records/10963940or from the corresponding authors.
References
Nicolas, A., Ferrero, E. E., Martens, K. & Barrat, J.-L. Deformation and flow of amorphous solids: Insights from elastoplastic models. Rev. Mod. Phys. 90, 045006 (2018).
Binder,K. & Kob, W. Glassy materials and disordered solids: An introduction to their statistical mechanics (World Scientific, 2011).
Wang, W.-H., Dong, C. & Shek, C. Bulk metallic glasses. Mater. Sci. Eng. R. 44, 45 (2004).
Bonn, D., Denn, M. M., Berthier, L., Divoux, T. & Manneville, S. Yield stress materials in soft condensed matter. Rev. Mod. Phys. 89, 035005 (2017).
Aime, S., Truzzolillo, D., Pine, D. J., Ramos, L. & Cipelletti, L. A unified state diagram for the yielding transition of soft colloids. Nat. Phys. 19, 1673 (2023).
Ancey, C. Plasticity and geophysical flows: A review. J. Non-Newton. Fluid Mech. 142, 4 (2007).
Jerolmack, D. J. & Daniels, K. E. Viewing earth’s surface as a soft-matter landscape. Nat. Rev. Phys. 1, 716 (2019).
Schall, P., Weitz, D. A. & Spaepen, F. Structural rearrangements that govern flow in colloidal glasses. Science 318, 1895 (2007).
Ghosh, A. et al. Direct observation of percolation in the yielding transition of colloidal glasses. Phys. Rev. Lett. 118, 148001 (2017).
Jaiswal, P. K., Procaccia, I., Rainone, C. & Singh, M. Mechanical yield in amorphous solids: A first-order phase transition. Phys. Rev. Lett. 116, 085501 (2016).
Parisi, G., Procaccia, I., Rainone, C. & Singh, M. Shear bands as manifestation of a criticality in yielding amorphous solids. Proc. Natl Acad. Sci. USA 114, 5577 (2017).
Ozawa, M., Berthier, L., Biroli, G., Rosso, A. & Tarjus, G. Random critical point separates brittle and ductile yielding transitions in amorphous materials. Proc. Natl Acad. Sci. USA 115, 6656 (2018).
Cates, M., Wittmer, J., Bouchaud, J.-P. & Claudin, P. Jamming, force chains, and fragile matter. Phys. Rev. Lett. 81, 1841 (1998).
Murphy, K. A., Dahmen, K. A. & Jaeger, H. M. Transforming mesoscale granular plasticity through particle shape. Phys. Rev. X 9, 011014 (2019).
Mailman, M., Harrington, M., Girvan, M. & Losert, W. Consequences of anomalous diffusion in disordered systems under cyclic forcing. Phys. Rev. Lett. 112, 228001 (2014).
Royer, J. R. & Chaikin, P. M. Precisely cyclic sand: Self-organization of periodically sheared frictional grains. Proc. Natl Acad. Sci. USA 112, 49 (2015).
Kawasaki, T. & Berthier, L. Macroscopic yielding in jammed solids is accompanied by a nonequilibrium first-order transition in particle trajectories. Phys. Rev. E 94, 022615 (2016).
Dagois-Bohy, S., Somfai, E., Tighe, B. P. & van Hecke, M. Softening and yielding of soft glassy materials. Soft Matter 13, 9036 (2017).
Nagasawa, K., Miyazaki, K. & Kawasaki, T. Classification of the reversible–irreversible transitions in particle trajectories across the jamming transition point. Soft Matter 15, 7557 (2019).
Das, P., Vinutha, H. & Sastry, S. Unified phase diagram of reversible–irreversible, jamming, and yielding transitions in cyclically sheared soft-sphere packings. Proc. Natl Acad. Sci. USA 117, 10203 (2020).
Priezjev, N. V. Heterogeneous relaxation dynamics in amorphous materials under cyclic loading. Phys. Rev. E 87, 052302 (2013).
Fiocco, D., Foffi, G. & Sastry, S. Oscillatory athermal quasistatic deformation of a model glass. Phys. Rev. E 88, 020301 (2013).
Regev, I., Weber, J., Reichhardt, C., Dahmen, K. A. & Lookman, T. Reversibility and criticality in amorphous solids. Nat. Commun. 6, 1 (2015).
Leishangthem, P., Parmar, A. D. & Sastry, S. The yielding transition in amorphous solids under oscillatory shear deformation. Nat. Commun. 8, 1 (2017).
Jin, Y., Urbani, P., Zamponi, F. & Yoshino, H. A stability-reversibility map unifies elasticity, plasticity, yielding, and jamming in hard sphere glasses. Sci. Adv. 4, eaat6387 (2018).
Yeh, W.-T., Ozawa, M., Miyazaki, K., Kawasaki, T. & Berthier, L. Glass stability changes the nature of yielding under oscillatory shear. Phys. Rev. Lett. 124, 225502 (2020).
Keim, N. C. & Arratia, P. E. Mechanical and microscopic properties of the reversible plastic regime in a 2d jammed material. Phys. Rev. Lett. 112, 028302 (2014).
Knowlton, E. D., Pine, D. J. & Cipelletti, L. A microscopic view of the yielding transition in concentrated emulsions. Soft Matter 10, 6931 (2014).
Nagamanasa, K. H., Gokhale, S., Sood, A. & Ganapathy, R. Experimental signatures of a nonequilibrium phase transition governing the yielding of a soft glass. Phys. Rev. E 89, 062308 (2014).
Denisov, D. V. et al. Sharp symmetry-change marks the mechanical failure transition of glasses. Sci. Rep. 5, 1 (2015).
Marty, G. & Dauchot, O. Subdiffusion and cage effect in a sheared granular material. Phys. Rev. Lett. 94, 015701 (2005).
Kou, B. et al. Granular materials flow like complex fluids. Nature 551, 360 (2017).
Kou, B. et al. Translational and rotational dynamical heterogeneities in granular systems. Phys. Rev. Lett. 121, 018002 (2018).
Zhao, Y. et al. Ultrastable shear-jammed granular material. Phys. Rev. X 12, 031021 (2022).
Otsuki, M. & Hayakawa, H. Shear jamming, discontinuous shear thickening, and fragile states in dry granular materials under oscillatory shear. Phys. Rev. E 101, 032905 (2020).
Papanikolaou, S., O’Hern, C. S. & Shattuck, M. D. Isostaticity at frictional jamming. Phys. Rev. Lett. 110, 198002 (2013).
Ikeda, H., Brito, C., Wyart, M. & Zamponi, F. Jamming with tunable roughness. Phys. Rev. Lett. 124, 208001 (2020).
Sun, X. et al. Friction-controlled entropy-stability competition in granular systems. Phys. Rev. Lett. 125, 268005 (2020).
Pouliquen, O., Belzons, M. & Nicolas, M. Fluctuating particle motion during shear induced granular compaction. Phys. Rev. Lett. 91, 014301 (2003).
Slotterback, S. et al. Onset of irreversibility in cyclic shear of granular packings. Phys. Rev. E 85, 021309 (2012).
Denisov, D., Lörincz, K., Uhl, J., Dahmen, K. A. & Schall, P. Universality of slip avalanches in flowing granular matter. Nat. Commun. 7, 1 (2016).
Forterre, Y. & Pouliquen, O. Flows of dense granular media. Annu. Rev. Fluid Mech. 40, 1 (2008).
Li, Z. et al. Microscopic structure and dynamics study of granular segregation mechanism by cyclic shear. Sci. Adv. 7, eabe8737 (2021).
Yuan, Y. et al. Experimental test of the Edwards volume ensemble for tapped granular packings. Phys. Rev. Lett. 127, 018002 (2021).
Xing, Y. et al. X-ray tomography investigation of cyclically sheared granular materials. Phys. Rev. Lett. 126, 048002 (2021).
MiDi, G. D. R. On dense granular flows. Eur. Phys. J. E 14, 341 (2004).
Weeks, E. R. & Weitz, D. Properties of cage rearrangements observed near the colloidal glass transition. Phys. Rev. Lett. 89, 095704 (2002).
Metzler, R., Jeon, J.-H., Cherstvy, A. G. & Barkai, E. Anomalous diffusion models and their properties: Non-stationarity, non-ergodicity, and ageing at the centenary of single particle tracking. Phys. Chem. Chem. Phys. 16, 24128 (2014).
Berthier, L. et al. Growing timescales and lengthscales characterizing vibrations of amorphous solids. Proc. Natl Acad. Sci. USA 113, 8397 (2016).
Chaudhuri, P., Berthier, L. & Kob, W. Universal nature of particle displacements close to glass and jamming transitions. Phys. Rev. Lett. 99, 060604 (2007).
Singh, R. & Burov, S. Universal to nonuniversal transition of the statistics of rare events during the spread of random walks. Phys. Rev. E 108, L052102 (2023).
Sciortino, F. Potential energy landscape description of supercooled liquids and glasses. J. Stat. Mech. 2005, P05015 (2005).
Deshpande, N. S., Furbish, D. J., Arratia, P. E. & Jerolmack, D. J. The perpetual fragility of creeping hillslopes. Nat. Commun. 12, 3909 (2021).
Acknowledgements
We are grateful to S. Burov for the discussions. This work is supported by the National Natural Science Foundation of China (No. 11974240), and the Science and Technology Commission of Shanghai Municipality (No. 22YF1419900). Y. Y. acknowledges support from the fellowship of the China Postdoctoral Science Foundation (No. 2021M702151). W. K. is a senior member of the Institut Universitaire de France.
Author information
Authors and Affiliations
Contributions
Y.Y., Y.W., and W.K. designed the research. Y.Y., Z.Z., Y.X., H.Y., and S.Z. performed the experiment. Y.Y., W.K., and Y.W. analyzed the data and wrote the paper.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Yuan, Y., Zeng, Z., Xing, Y. et al. From creep to flow: Granular materials under cyclic shear. Nat Commun 15, 3866 (2024). https://doi.org/10.1038/s41467-024-48176-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-024-48176-6
- Springer Nature Limited