Abstract
Symmetry-protected band degeneracy, coupled with a magnetic order, is the key to realizing novel magnetoelectric phenomena in topological magnets. While the spin-polarized nodal states have been identified to introduce extremely-sensitive electronic responses to the magnetic states, their possible role in determining magnetic ground states has remained elusive. Here, taking external pressure as a control knob, we show that a metal-insulator transition, a spin-reorientation transition, and a structural modification occur concomitantly when the nodal-line state crosses the Fermi level in a ferrimagnetic semiconductor Mn3Si2Te6. These unique pressure-driven magnetic and electronic transitions, associated with the dome-shaped Tc variation up to nearly room temperature, originate from the interplay between the spin-orbit coupling of the nodal-line state and magnetic frustration of localized spins. Our findings highlight that the nodal-line states, isolated from other trivial states, can facilitate strongly tunable magnetic properties in topological magnets.
Similar content being viewed by others
Introduction
Topological magnets where the symmetry-protected band degeneracy is coupled with magnetism have emerged as a new material platform for novel transport phenomena and spintronic functionalities1,2,3,4,5,6,7. Among various types of topological magnets, the so-called nodal-line magnetic semimetals or semiconductors are one of the most seminal examples that exhibit unprecedentedly large magnetotransport responses, including giant anomalous Hall effect (AHE)8,9,10,11,12,13,14 and colossal angular magnetoresistance (AMR)15,16,17. Unlike Dirac or Weyl magnets, the topological nodal-line magnets possess lines or loops of the band degeneracy in the momentum space, which can be lifted effectively by tunable spin-orbit coupling (SOC), producing strong Berry curvature with spin orientation. The key issue is then establishing a comprehensive picture of the intimate coupling between the magnetic and electronic degrees of freedom in the nodal-line magnets. While magnetic control of the electronic response of the nodal-line states has been demonstrated8,9,10,11,12,13,14,15, the question of how the presence of the nodal-line states and their tuning affect the magnetic properties, such as the magnetic configurations and anisotropy, has rarely been addressed experimentally. The challenges are to find a system with the symmetry-protected nodal-line states in the vicinity of the Fermi level without trivial bands and to control them effectively with external perturbations.
The recently discovered nodal-line magnetic semiconductors can serve as a model system where the spin-polarized valence or conduction bands possess nodal-line band degeneracy. For such magnetic semiconductors, pressure offers a clean and continuous tuning parameter for modulating their electronic structures, e. g. band gap or width, and the magnetic exchange interactions without introducing disorders or doping18. Thus a pressure-driven magnetic transition or a metal-insulator transition (MIT) in nodal-line magnetic semiconductors can unveil the essential role of the nodal-line states in determining both magnetic and electronic properties. In this work, we address this issue by investigating magnetic, electronic, and structural properties of a nodal-line ferrimagnetic semiconductor Mn3Si2Te6. Using the magnetotransport, magnetization and X-ray diffraction measurements at high pressures, we found that a pressure-driven MIT, a spin-reorientation transition (SRT), and a structural modification, occur concomitantly at a critical pressure Pc ~ 14 GPa. We also found an unusual dome-shaped ferrimagnetic transition (Tc) variation with pressure reaching up to nearly room temperature. These observations, together with the systematic variation of the AHE and AMR, reveal the critical role of the nodal-line states on the pressure-induced magnetic and electronic responses of Mn3Si2Te6.
Results and discussion
Mn3Si2Te6 has a self-intercalated van der Waals structure with the trigonal \(P\bar{3}1c\) space group, consisting of an alternating stack of the MnSiTe3 layers with the hexagonal honeycomb network of Mn1 atoms and the Mn layers with the triangular lattice of Mn2 atoms (Fig. 1a)19,20. Electronically, it is a p-type narrow gap semiconductor and hosts an easy-plane (ab-plane) ferrimagnetic phase below Tc ≈ 78 K with an antiparallel alignment of localized spins at the Mn1 and Mn2 sublattices (Fig. 1a). First-principles calculations revealed that this ferrimagnetic phase can be explained by magnetic frustration of competing antiferromagnetic (AFM) exchange couplings between the neighboring Mn spins15,21. When the uncompensated magnetization is rotated toward a hard axis (c-axis)15,16, a huge AMR up to ~1011%/rad, has been observed at low temperatures, named colossal AMR9,15,16,21,22. These remarkable properties have been attributed to a magnetic field-driven MIT due to the lifting of the nodal-line band degeneracy by a tunable spin-orbit coupling (SOC) gap with spin rotation15. Because the relevant electronic state is only the Te-derived valence bands with nodal-line band degeneracy, they are expected to approach the unoccupied band as the electronic gap (Δ) shrinks under pressure, eventually inducing pressure-driven MIT (Fig. 1b). For the out-of-plane spin orientation, then the nodal-line states which hybridized with the Mn states of the localized spins can work as a strong source of Berry curvature nearby EF due to a finite SOC gap (ΔSOC) shown in Fig. 1c. Therefore Mn3Si2Te6 serves as a model system to study the interplay of the nodal-line electronic states and the frustrated magnetic coupling.
The pressure effects on the electronic and magnetic properties of Mn3Si2Te6 are clearly observed in its temperature-dependent ab-plane resistivity ρab(T) measured at different pressures (Fig. 1d, e). Upon increasing pressure, the overall magnitude of ρab(T) is continuously reduced, and the slope dρab/dT changes from negative to positive across Pc ~ 14 GPa, signaling a pressure-driven MIT. Similar behavior was observed for six different crystals from three different batches (Supplementary Note 11). The crossover between the insulating and metallic behaviors is clearly separated by the Mott-Ioffe-Regel limit with ρMIR = ℏc/e2 (the dashed line in Fig. 1d), where c is the c-axis lattice constant of Mn3Si2Te6. Accordingly, the activation behavior at low temperatures is dramatically suppressed (Supplementary Fig. S1), and the corresponding activation gap Δ extracted from the fits to the Arrhenius model closes at Pc (Fig. 1f). The slow upturn of ρab(T) at low temperatures above Pc follows the logarithmic T dependence, indicating the Kondo scattering23 or disorder-induced localization24,25. The MIT at Pc ~14 GPa is further confirmed by infrared (IR) reflectance spectroscopy, which reveals a drastic enhancement of the optical conductivity above ~Pc (Supplementary Note 10). These results are consistent with the recent results in ref. 26, but not in ref. 27, most likely due to different doping levels in Mn3Si2Te6 crystals (Supplementary Note 11).
In addition to the MIT, we observed a significant change of the resistivity anomaly, corresponding to a ferrimagnetic transition at Tc15,16,21. This resistive anomaly shifts towards higher temperatures with pressure, reaching nearly room temperature at Pc ~14 GPa, as seen more clearly in the normalized resistive curves ρ(T)/ρ(300 K) (Fig. 1e). In the metallic regime above Pc, the resistivity anomaly is no longer observable. However, as discussed below, Tc can be traced by the AHE measurements, which clearly decreases with pressure above Pc (Fig. 2). Consistently, temperature-dependent magnetic susceptibility χ(T) on Mn3Si2Te6 confirms strong enhancement of Tc under pressure for both H∥ab and H∥c, as the onset of χ(T) shifts to higher temperatures (Supplementary Fig. S4). This behavior is also consistent with recent reports on the enhancement of Tc with pressure27,28. The pressure-dependent Tc data estimated from ρab(T) and χ(T) match well with each other, firmly constructing a dome-shaped Tc variation with a maximum Tc close to room temperature (Fig. 1f).
The magnetotransport properties of Mn3Si2Te6 also exhibit systematic changes with pressure. The temperature-dependent ρab(T) curves at different magnetic fields and pressures reveal that the magnetoconductivity (MC) becomes weaker in the more metallic state at higher pressures (Supplementary Fig. S2). This is clearly seen in the field-dependent MC, defined as Δσ(H)/σ(0) for H∥c at different pressures (Fig. 2a). As demonstrated at ambient pressure15, Δσ(H)/σ(0) is dominated by the AMR with rotating magnetization toward the c-axis under H∥c. Because the key mechanism is the lifting of the nodal-line degeneracy of the spin-polarized valence bands due to spin-orbit coupling (ΔSOC) and the resulting closure of the electronic gap (Δ), the relative sizes of Δ and ΔSOC are the main parameters determining the AMR. As illustrated in Fig. 1b, the reduction of the electronic gap Δ results in the semimetallic band structures at high pressures. Assuming that the SOC gap ΔSOC remains nearly the same, the AMR is expected to be suppressed with pressure, which is indeed what is observed experimentally (Fig. 2f). Upon increasing pressure, Δσ(H)/σ(0) at 20 K drops by four orders of magnitude and becomes negligible above Pc ~14 GPa. Therefore significant reduction of the AMR, together with suppression of the activation gap estimated from ρab(T) (Fig. 1f), strongly suggests that the nodal-line bands approach and eventually cross the Fermi level EF at a critical pressure Pc.
This conclusion is further supported by the Hall response of Mn3Si2Te6 with pressure. In a low-pressure region (P < 13 GPa), the Hall conductivity σxy(H) shows a non-linear field-dependence with an initial exponential increase at low magnetic fields (Supplementary Fig. S3a). Such an unusual behavior of σxy(H) is distinct from the field-dependent magnetization M(H) and the conventional AHE, but it can be understood by considering the strong field-dependence of the activation gap and thus the density of hole carriers (Supplementary Note 2). When Mn3Si2Te6 enters the metallic phase above Pc, σxy(H) shows a qualitatively different behavior with a large jump of σxy(H) and a clear magnetic hysteresis at low magnetic fields. These features are the hallmarks of the AHE of ferro- or ferrimagnets with perpendicular magnetic anisotropy29, suggesting the pressure-driven spin reorientation in Mn3Si2Te6 across Pc. With the spontaneous spin alignment along the c-axis, the lifted nodal-line degeneracy produces strong Berry curvature (Fig. 1c), resulting in a large AHE. Consistently, the σxy(H) value at H = 1 T increases substantially at Pc and then weakens slightly with further increasing pressure (Fig. 2g). These results thus support the fact that the nodal-line bands cross the EF when the MIT occurs. Using this significant AHE above Pc, we tracked the Tc of Mn3Si2Te6. The magnetic susceptibility, estimated from χH ~ σxy(H)/H, and the anomalous Hall conductivity \({\sigma }_{xy}^{A}(0)\) by remnant magnetization shows that Tc remains close to the room temperature just above Pc, but shifts to lower temperatures down to 200 K at 21.0 GPa (Fig. 2e, j). The opposite pressure dependence of Tc below and above Pc leads to a dome-shaped phase boundary, separated by the pressure-driven MIT.
The isothermal magnetization measurements at high pressures confirm the pressure-driven SRT. Figure 2c, d show magnetic field-dependent M(H) at 5 K measured under different pressures for H∥ab and H∥c, respectively. At ambient pressure, the ab-plane magnetization Mab spontaneously increases and reaches a saturation magnetic moment Msat of ~1.7μB at a low field of H ~0.2 T, while the c-axis magnetization Mc sharply increases at low fields but then slowly rises up to Msat at higher fields. The larger saturation field Hsat for H∥c than for H∥ab indicates the easy-plane (ab) magnetic anisotropy, and the corresponding magnetic anisotropy energy scale K can be estimated using the equation \({H}_{sat}^{c}=2K/{M}_{sat}\). By extrapolation of M(H) data to higher fields for both H∥c and H∥ab (Supplementary Note 3 and Fig. S4), we estimated the pressure-dependent K, which clearly decreases with pressure and is expected to change its sign around Pc ~14 GPa (Fig. 2h). At higher pressures for H∥c (Fig. 2d) a sudden increase of the low-field magnetization is observed near Pc, accompanied by a clear hysteresis loop, which indicates the perpendicular magnetic anisotropy. The M(H) data can be nicely reproduced by σxy(H) above Pc (Fig. 2b), following a relation σxy(H) = SHM(H) (Supplementary Note 2 and Fig. S3b). After the SRT transition, the low-field magnetic moment for H∥c at H = 0.2 T reaches ~1.5μB/Mn, following the trend of Msat at lower pressures (Fig. 2i). With further increasing magnetic field, Mc slowly increases up to ~2μB /Mn, which remains close to the value for the high-spin ferrimagnetic phase (\({t}_{2g}^{3}{e}_{g}^{2}\), ~5/3 μB/Mn), clearly distinguished from the values expected for the ferromagnetic phases of the high-spin (~5μB/Mn) and the low-spin (\({t}_{2g}^{5}{e}_{g}^{0}\), ~1 μB/Mn) states of Mn2+ atoms. These observations suggest that neither the spin crossover transition from the high-spin to the low-spin states nor the ferrimagnetic-to-ferromagnetic transitions occur in Mn3Si2Te6 at high pressure. Rather, the SRT from the easy-plane to easy-axis magnetic anisotropy concomitantly occurs within the ferrimagnetic phase at Pc.
In addition to the MIT and SRT, a structural modification occurs at Pc. The synchrotron X-ray diffraction patterns (XRD) of Mn3Si2Te6 up to ~25 GPa (Fig. 3a) show that up to Pc ~14 GPa, all the diffraction peaks are identified with the trigonal structure with \(P\bar{3}1c\) space group, same as the ambient structure. However, the above Pc X-ray diffraction patterns are suddenly modified, indicating a structural transformation. Although the accurate determination of the crystal structure is known to be problematic due to sample strain and texture at high pressures18,30, we identified several structural models that can produce good fitting to the XRD data (Supplementary Note 5) and then compared their total energies from the DFT calculations. Among them, we found that a monoclinic structure with the C2/c space group has the lowest total energy and, thus, is likely the candidate structure above Pc (Supplementary Table S1). The monoclinic high-P phase can be described as a distorted trigonal \(P\bar{3}1c\) structure in which a single Te site is split into three distinct sites and a weak sliding of the MnSiTe3 layers relative to each other induces a slight monoclinic distortion by ~3∘. Despite the symmetry lowering, the structural motif remains the same in both low- and high-P phases i.e., the alternating stack of the MnSiTe3 layers and the triangular lattice remains in the high-pressure phase (Fig. 3d, e). The unit cell volume V derived from the Le Bail fitting to the XRD patterns vary smoothly with pressure below Pc, well fitted with a third-order Birch–Murnaghan equation of state31,32 (Fig. 3b), and then shows a mild drop of ~7% at Pc. By describing the lattice parameters above Pc into the pseudo-trigonal lattice system, a = b = \(\frac{1}{2}\sqrt{{a}_{m}^{2}+{b}_{m}^{2}}\), c = cm (am and cm, the lattice parameters for the C2/c structure - see Supplementary Note 5), we found that this mild volume reduction at Pc is due to small shrinkage in both the in-plane and the out-of-plane lattice parameters by ~2% across Pc (Fig. 3b, c). The pressure-dependent lattice parameters (a, c) show that the system is more compressible along the c-axis than the a-axis below Pc, consistent with the pressure-dependent Raman spectra (Supplementary Note 4), whereas the ab-plane and the c-axis are compressed nearly isotropic with almost constant c/a ratio above Pc. This distinct lattice response is possibly related to the opposite trend of Tc across Pc, as discussed below.
The ferrimagnetic ground state of Mn3Si2Te6 is the consequence of magnetic frustration between three types of the nearest-neighbor superexchange coupling Ji (i = 1, 2, 3) (Fig. 3g). All AFM exchange couplings between Mn spins of the face-sharing (J1), of the edge-sharing (J2), and of the corner-sharing (J3) octahedra compete with each other with a hierarchy of J1 > J3 > J2, as confirmed by first principle calculations and neutron scattering15,21,33. This hierarchy of J’s makes the intralayer FM configurations of Mn1 spins and the interlayer AFM configurations of Mn1 and Mn2 spins, which stabilizes the ferrimagnetic phase. Upon increasing pressure, these exchange couplings remain AFM and become larger in magnitude, as estimated from the first principle calculations (Fig. 3g). The largest interlayer J1 coupling shows a much faster increase with pressure than the others because the J1 direct d-d exchange interaction is significantly enhanced by shorting the interlayer Mn1-Mn2 distance due to the strong lattice contraction along the c-axis (Fig. 3c). On the other hand, the anisotropic lattice response increases the Mn1-Te-Mn2 angle of the corner-sharing octahedra and thus the J3 coupling, whereas the J2 coupling within the layers is enhanced mildly due to the relatively weak reduction of the Mn1-Mn1 distance (Supplementary Fig. S9). Since J3 grows faster than J2 with pressure below Pc, the difference between them, Jeff ~ ∣J3 − J2∣, increases significantly with pressure, inducing a linear increase of the measured Tc with Jeff (Fig. 3f). In the high-pressure phase above Pc, however, the compressibilities of the ab-plane and c-axis become similar to each other (Fig. 3c), which is more effective in enhancing J2 by making the AFM direct exchange stronger with a shortened intralayer Mn1-Mn1 distance. As a result, the difference between J2 and J3, i.e., Jeff, is expected to be reduced, which promotes magnetic frustration and thereby suppresses Tc above Pc (Fig. 1f). These observations suggest that different lattice responses to pressure, which tips over the subtle balance of frustrated magnetic couplings, have a solid connection to the strong and opposite pressure dependence of Tc across Pc.
Having established that the MIT, the SRT, and structural modification occur at ~Pc, we now discuss the possible origin of such concomitant transitions in Mn3Si2Te6. In various manganese chalcogenides, including MnPCh334, MnCh35 and MnCh2 (Ch = S, Se, Te)36,37,38,39, the pressure-driven MIT is known to be accompanied by a structural transition. In these manganese chalcogenides, the spin crossover transition from the high-spin (\({t}_{2g}^{3}{e}_{g}^{2}\)) to the low-spin (\({t}_{2g}^{5}{e}_{g}^{0}\)) states of Mn2+ atoms commonly triggers the so-called giant volume collapse by at least ~20% and introduces the Mn-Mn metallic bonding due to the drastic reduction of the Mn2+ ionic size from 0.83 to 0.67 Å. In contrast, the ferrimagnetic phase in a high-spin Mn2+ state of Mn3Si2Te6 remains stable across Pc, accompanied by a moderate volume reduction of ~7%. This clearly distinguishes its pressure-driven transition from those found in the other manganese chalcogenides (Supplementary Table S2). Furthermore, the pressure-driven MIT, associated with the SRT, is also observed in 20% Se-doped Mn3Si2Te6 crystal, showing qualitatively the same behaviors of the magnetotransport properties and the dome-shaped Tc variation with pressure (Supplementary Note 7). Considering the different structural parameters which lead to different bond lengths and angles in the undoped and doped crystals, these observations imply that, unlike the other manganese chalcogenides, the pressure-driven modulation of the electronic structure plays a critical role in triggering the other concomitant transitions in Mn3Si2Te6.
The key difference of the pressure-driven MIT in Mn3Si2Te6 from other manganese chalcogenides is the touching of the nodal-line states at EF, which is confirmed by the drop of the AMR and the sudden rise of the AHE at Pc (Fig. 2a, b). In this case, the strong SOC of the nodal-line states can induce the SRT. At ambient pressure, the localized Mn spins of Mn3Si2Te6 prefer the in-plane alignment due to the magnetic exchange anisotropy40. The spin-polarized nodal-line states of the Te-rich valence bands, well below the EF, are mostly occupied regardless of the spin orientation, which makes a minor contribution to the magnetic anisotropy (Fig. 4a). However, when the degenerate nodal-line states are located close to the EF near Pc, the lifting of the band degeneracy by strong SOC with the out-of-plane spin orientation, parallel to the orbital angular momentum of the Te bands, can push the two split bands well above and below the EF (Fig. 4b). As a consequence, charge transfer from the higher-energy SOC-split band to the lower-energy conduction band provides an energy gain for the perpendicular magnetic anisotropy. The strong correlation between the magnetic anisotropic energy K and the activation gap Δ is consistent with this picture (Fig. 4c). Furthermore, transport and Raman spectroscopy measurements taken on decompression indicate that the MIT and SRT are reversible with significant hysteresis (Supplementary Note 9). Even in the presence of substantial strain disorder in the decompressed crystal, the preferred spin orientation, either in the in-plane or along the out-of-plane, is well defined and correlated with the electronic states, either gapped or gapless. Therefore, it can be concluded that, indeed, the MIT and SRT are tied together due to the SOC effect in the nodal-line states.
The pressure-driven instability for the SRT and the resulting interband charge transfer also provide a reasonable explanation for the structural modification at Pc. In Mn3Si2Te6, the lowest-energy conduction bands are mainly from the in-plane Mn1 3d orbitals hybridized Te 5p orbitals. Below Pc, the in-plane contraction is mainly related to the displacement of the Te atoms in the MnTe6 octahedra (Supplementary Fig. S9), leading to a relatively small contraction in the ab-plane than along the c-axis. At Pc, however, the occupation of the bonding state of Mn1 orbitals due to the interband charge transfer is effective in reducing the intralayer Mn1-Mn1 distance, and therefore the in-plane lattice parameter, in good agreement with the sudden shrinkage of the ab-plane (Fig. 3c). Above Pc, the semimetallic band structure promotes intralayer and interlayer metallic bonding, making a more isotropic lattice response to pressure with a nearly constant c/a ratio with pressure (Fig. 3c). The MIT with the nodal-line states and their strong SOC provide a natural explanation for the concomitant SRT and structural transition at Pc.
Our findings establish a concrete example in which the spin-polarized nodal-line states are actively involved in determining the magnetic properties in topological magnets. This exceptional tunability of the magnetic and electronic properties with pressure is a consequence of several attributes of Mn3Si2Te6. The magnetic frustration with competing AFM coupling channels makes Tc extremely sensitive to pressure-induced electronic and structural modification. The high-spin configuration (\({t}_{2g}^{3}{e}_{g}^{2}\)) of Mn2+ atoms suppresses the single-ion anisotropy without orbital degrees of freedom, which makes the system more susceptible to the Te states with strong SOC. The absence of other trivial electronic states at EF is also crucial for the nodal-line state with strong SOC to contribute significantly to magnetic and electronic properties. These key ingredients and their interplay enable to trigger of unprecedented pressure-driven phase transitions in Mn3Si2Te6, providing the material-guiding principle for small-gap magnetic semiconductors with topological band degeneracy. Our findings demonstrate that tuning the energy position of the isolated nodal-line states with respect to the Fermi level by e.g., strain or electrical gating offers a novel route for the spin-related functionalities in magnetic semiconductors.
Methods
Single crystal growth
Single crystals of Mn3Si2Te6 were grown using a high-temperature self-flux method15. A mixture of Mn (99.95 %), Si (99.999 %), and Te (99.999 %) in a molar ratio of 1:2:6 was placed in an alumina crucible, and another empty alumina crucible was kept on top of it with quartz wool separation. The whole crucible assembly was sealed in an evacuated quartz ampoule and first heated in a muffle furnace up to 1000 °C in 12 h and kept dwelling for 24 h to obtain a homogeneous solution. The furnace was then slowly cooled down to 700 °C in 150 h and held for 12 h at 700 °C. The ampoule was then quickly taken out and centrifuged to separate the crystals from the fluxes.
A standard chemical vapor transport (CVT) technique was employed to grow the 20% Se-doped crystals15. I2 was used as a transport agent. A temperature gradient of 750 to 700 °C was maintained for 400 h for the crystal growth followed by cooling to room temperature at 70 °C h−1.
High-pressure magnetotransport and magnetization experiments
The resistivity data at high pressure were measured up to ~23 GPa in Quantum Design PPMS using a non-magnetic diamond anvil cell (DAC) made of a NiCrAl alloy. The size of the diamond culet used was 400 μm in diameter. Mn3Si2Te6 single crystal was cut into a square of ~80 μm in width with 10 μm in thickness. NaCl was used as a pressure medium for all runs. We used the van der Pauw four-probe method to measure electrical resistance by using platinum (Pt) foil as electrodes. Two ruby balls were put inside the sample chamber to determine the pressure41. Magnetization measurements under pressure were performed in a Quantum Design MPMS using a non-magnetic miniature DAC made of Cu-Be alloy with the diamond anvils culet of 600 μm. A Mn3Si2Te6 crystal of about 150 μm × 150 μm × 30 μm in size was loaded in a sample chamber made by a laser-drilled Rhenium gasket with silicon oil as pressure transmitting medium and ruby as pressure calibrant41.
Synchrotron X-ray diffraction experiments at high pressures
Synchrotron X-ray diffraction (XRD) measurements were conducted at beamline 16-BM-D, Sector 16, HPCAT at the Advanced Photon Source, Argonne National Laboratory (λ = 0.4833 Å). Several small single crystals of Mn3Si2Te6 were ground into powder and loaded into the diamond anvil cell. Argon was used as a pressure transmitting medium, and ruby was used to determine pressure41. A small grain of gold powder located inside the sample chamber was also used as an additional pressure determinant via the known EOS42. The 2D diffraction images were integrated using DIOPTAS software43. The Le Bail fitting to the X-ray diffraction patterns were accomplished using the Fullprof/ Winplotr software44,45. Despite the use of different pressure medium between different sets of experiments, the MIT, SRT, and structural modification occur at a similar critical pressure Pc ~14 GPa. This indicates that Mn3Si2Te6 is not sensitive to the different hydrostatic conditions.
First-principles calculations
Density functional theory calculation within project augmented wave method46 was performed utilizing Vienna ab initio package (VASP)47. The Perdew-Burke-Ernzerhof exchange-correlation functional48 is used, and the relativistic effect is considered within the second variational spin-orbit interaction scheme. To take into account of Coulomb correlation effect, DFT+U calculation within Dudarev scheme49 with effective Coulomb potential of U = 3 eV in Mn d orbital have been used. The plane energy cutoff of 450 eV and k mesh of 12 × 6 × 12 for the Brillouin zone integration is used for the calculation. To compare the total energy of the experimentally suggested high-pressure structure candidates, we adopted the experimental lattice constant and optimized the internal positions of each atoms.
Data availability
All data supporting the findings of this study are available within the main text and the Supplementary Information file. The data that support the findings of this study are available from the corresponding authors upon reasonable request. Source data are provided with this paper.
Change history
20 June 2024
A Correction to this paper has been published: https://doi.org/10.1038/s41467-024-49413-8
References
Armitage, N. P., Mele, E. J. & Vishwanath, A. Weyl and Dirac semimetals in three-dimensional solids. Rev. Mod. Phys. 90, 015001 (2018).
Manna, K., Sun, Y., Muechler, L., Kübler, J. & Felser, C. Heusler, Weyl and Berry. Nat. Rev. Mater. 3, 244–256 (2018).
Tokura, Y., Yasuda, K. & Tsukazaki, A. Magnetic topological insulators. Nat. Rev. Phys. 1, 126–143 (2019).
Nagaosa, N., Morimoto, T. & Tokura, Y. Transport, magnetic and optical properties of Weyl materials. Nat. Rev. Mater. 5, 621–636 (2020).
Bernevig, A., Felser, C. & Beidenkopf, H. Progress and prospects in magnetic topological materials. Nature 603, 41 (2022).
Nakatsuji, S. & Arita, R. Topological magnets: functions based on Berry phase and multipoles. Annu. Rev. Condens. Matter Phys. 13, 119 (2022).
Wang, J. & Zhang, S.-C. Topological states of condensed matter. Nat. Mater. 16, 1062 (2017).
Wang, Q. et al. Large intrinsic anomalous Hall effect in half-metallic ferromagnet \({{{{{{{{\rm{Co}}}}}}}}}_{3}{{{{{{{{\rm{Sn}}}}}}}}}_{2}{{{{{{{{\rm{S}}}}}}}}}_{2}\) with magnetic Weyl fermions. Nat. Commun. 9, 2681 (2018).
Liu, E. et al. Giant anomalous Hall effect in a ferromagnetic kagome-lattice semimetal. Nat. Phys. 14, 1125 (2018).
Kim, K. et al. Large anomalous Hall current induced by topological nodal lines in a ferromagnetic van der Waals semimetal. Nat. Mater. 17, 794–799 (2018).
Ye, L. et al. Massive Dirac fermions in a ferromagnetic kagome metal. Nature 555, 638–642 (2018).
Li, P. et al. Giant room temperature anomalous Hall effect and tunable topology in a ferromagnetic topological semimetal Co2MnAl. Nat. Commun. 11, 3476 (2020).
Guin, S. N. et al. 2D-Berry-curvature-driven large anomalous Hall effect in layered topological nodal-line MnAlGe. Adv. Mater. 33, 2006301 (2021).
Fang, S. et al. Ferromagnetic helical nodal line and kane-mele spin-orbit coupling in kagome metal Fe3Sn2. Phys. Rev. B 105, 035107 (2022).
Seo, J. et al. Colossal angular magnetoresistance in ferrimagnetic nodal-line semiconductors. Nature 599, 576 (2021).
Ni, Y. et al. Colossal magnetoresistance via avoiding fully polarized magnetization in the ferrimagnetic insulator Mn3Si2Te6. Phys. Rev. B 103, L161105 (2021).
Zhang, Y. et al. Control of chiral orbital currents in a colossal magnetoresistance material. Nature 611, 467–472 (2022).
Mao, H.-K., Chen, X.-J., Ding, Y., Li, B. & Wang, L. Solids, liquids, and gases under high pressure. Rev. Mod. Phys. 90, 015007 (2018).
Rimet, R., Schlenker, C. & Vincent, H. A new semiconducting ferrimagnet: a silicon manganese telluride. J. Magn. Magn. Mater. 25, 7 (1981).
Vincent, H., Leroux, D., Bijaoui, D., Rimet, R. & Schlenker, C. Crystal structure of Mn3Si2Te6. J. Solid State Chem. 63, 349 (1986).
May, A. F. et al. Magnetic order and interactions in ferrimagnetic Mn3Si2Te6. Phys. Rev. B 95, 174440 (2017).
Liu, Y. et al. Polaronic transport and thermoelectricity in Mn3Si2Te6 single crystals. Phys. Rev. B 103, 245122 (2021).
Kondo, J. Resistance minimum in dilute magnetic alloys. Prog. Theor. Phys. 32, 37–49 (1964).
Abrahams, E., Anderson, P. W., Licciardello, D. C. & Ramakrishnan, T. V. Scaling theory of localization: absence of quantum diffusion in two dimensions. Phys. Rev. Lett. 42, 673 (1979).
Anderson, P. W., Abrahams, E. & Ramakrishnan, T. V. Possible explanation of nonlinear conductivity in thin-film metal wires. Phys. Rev. Lett. 43, 718 (1979).
Huang, C. et al. Gap and magnetic engineering via doping and pressure in tuning the colossal magnetoresistance in (Mn1−xMgx)3Si2Te6. Phys. Rev. B. https://journals.aps.org/prb/accepted/d507eY57Wf217885a1a00c235bb4984d1cd4746b1 (2023).
Wang, J. et al. Pressure engineering of colossal magnetoresistance in the ferrimagnetic nodal-line semiconductor Mn3Si2Te6. Phys. Rev. B 106, 045106 (2022).
Olmos, R. et al. Pressure-dependent magnetic properties of quasi-2D Cr2Si2Te6 and Mn3Si2Te6. J. Phys. Chem. C. 127, 10324 (2023).
Nagaosa, N., Sinova, J., Onoda, S., MacDonald, A. H. & Ong, N. P. Anomalous Hall effect. Rev. Mod. Phys. 82, 1539 (2010).
Duffy, T. S. Synchrotron facilities and the study of the earth’s deep interior. Rep. Prog. Phys. 68, 1811 (2005).
Birch, F. Finite elastic strain of cubic crystals. Phys. Rev. 71, 809 (1947).
Murnaghan, F. D. Finite deformations of an elastic solid. Am. J. Math. 59, 235 (1937).
May, A. F., Cao, H. & Calder, S. Magnetic properties of ferrimagnetic Mn3Si2Se6. J. Magn. Magn. Mater. 511, 166936 (2020).
Wang, Y. et al. Pressure-driven cooperative spin-crossover, large-volume collapse, and semiconductor-to-metal transition in Manganese(II) honeycomb lattices. J. Am. Chem. Soc. 138, 15751 (2016).
Wang, Y. et al. Giant pressure-driven lattice collapse coupled with intermetallic bonding and spin-state transition in Manganese chalcogenides. Angew. Chem. Int. Ed. 55, 10350 (2016).
Kimber, S. A. J. et al. Giant pressure-induced volume collapse in the pyrite mineral MnS2. Proc. Natl Acad. Sci. USA 111, 5106 (2014).
Durkee, D. et al. Colossal density-driven resistance response in the negative charge transfer insulator MnS2. Phys. Rev. Lett. 127, 016401 (2021).
Wang, B. et al. Pressure induced structural transition and metallization in MnSe2. Phys. Chem. Miner. 47, 41 (2020).
Vulliet, P., Sanchez, J. P., Braithwaite, D., Amanowicz, M. & Malaman, B. Pressure-induced metallization and collapse of the antiferromagnetic state of MnTe2. Phys. Rev. B 63, 184403 (2001).
Sala, G. et al. Ferrimagnetic spin waves in honeycomb and triangular layers of Mn3Si2Te6. Phys. Rev. B 105, 214405 (2022).
Mao, H. K., Xu, J. & Bell, P. M. Calibration of the ruby pressure gauge to 800 kbar under quasi hydrostatic conditions. J. Geophys. Res. 91, 4673–4676 (1986).
Heinz, D. L. & Jeanloz, R. The equation of state of the gold calibration standard. J. Appl. Phys. 55, 885 (1984).
Prescher, C. & Prakapenka, V. B. Dioptas: a program for reduction of two-dimensional X-ray diffraction data and data exploration. High. Press. Res. 35, 223 (2015).
Rodríguez-Carvajal, J. Recent advances in magnetic structure determination by neutron powder diffraction. Phys. B 192, 55 (1993).
Roisnel, T. & Rodríguez-Carvajal, J. Winplotr: a windows tool for powder diffraction pattern analysis. Mat. Sci. Forum 378-381, 118 (2001).
Blöchl, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953 (1994).
Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169 (1996).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865 (1996).
Dudarev, S., Botton, G. A., Savrasov, S. Y., Humphreys, C. J. & Sutton, A. P. Electron-energy-loss spectra and the structural stability of nickel oxide: an LSDA+U study. Phys. Rev. B 57, 1505 (1998).
Acknowledgements
This work was supported by the Basic Science Research Program (NRF-2022R1A2C3009731, RS-2023-00272090), BrainLink program (No. 2022H1D3A3A01077468), the Max Planck POSTECH/Korea Research Initiative (Grant No. 2022M3H4A1A04074153 and 2020M3H4A2084417), funded by the Ministry of Science and ICT through the National Research Foundation (NRF) of Korea. R.A.S. was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (Grant No. 2021R1I1A1A01060209). This work is also supported by the Institute for Basic Science (IBS) through the Center for Artificial Low-Dimensional Electronic Systems (no. IBS-R014-D1). The work at SNU was financially supported by the Ministry of Science and ICT through the National Research Foundation of Korea (No. 2019R1A2C2090648), by the Ministry of Education (No. 2021R1A6C101B418), and the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. RS-2023-00220471). D.Y.K and Z.W. acknowledge the financial support from the National Natural Science Foundation of China (11774015, U1930401). K.K. was supported by the internal research and development program at KAERI (Grant 524550-24). S.-W.C. was supported partially by the DOE under Grant No. DOE: DE-FG02-07ER46382. N.P.S. and R.J.H. were supported by DOE-SC (DE-SC0020340), DOE-NNSA (DE-NA0003975), and NSF (DMR-2119308). Portions of this work were performed at HPCAT (Sector 16), Advanced Photon Source (APS), Argonne National Laboratory. HPCAT operations are supported by DOE-NNSA’s Office of Experimental Sciences. The Advanced Photon Source is a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357.
Author information
Authors and Affiliations
Contributions
J.S.K. and R.A.S. conceived the project. The single crystals were grown by C.D., J.S., B.K., H.W.Y. and S.-W.C. High-pressure transport experiments were carried out by R.A.S. and C.I.K. High-pressure magnetic measurements were performed by Y.L. and K.H.K. C.I.K. performed the Raman spectroscopy measurements. Synchrotron X-ray diffraction experiments were carried out by N.P.S. and R.J.H. First-principles calculations were performed by K.K. Z.W., and D.Y.K. P.D.-S. carried out the infrared spectroscopy measurements. R.A.S., C.I.K., Y.L., K.H.K. and J.S.K. performed data analyses and co-wrote the manuscript. All authors discussed the results and commented on the paper.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Susilo, R.A., Kwon, C.I., Lee, Y. et al. High-temperature concomitant metal-insulator and spin-reorientation transitions in a compressed nodal-line ferrimagnet Mn3Si2Te6. Nat Commun 15, 3998 (2024). https://doi.org/10.1038/s41467-024-48432-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-024-48432-9
- Springer Nature Limited