Abstract
The advancement in flexible electronics and neuromorphic electronics has opened up opportunities to construct artificial perception systems to emulate biological functions which are of great importance for intelligent robotics and human-machine interactions. However, artificial systems that can mimic the somatosensory feedback functions have not been demonstrated yet despite the great achievement in this area. In this work, inspired by human somatosensory feedback pathways, an artificial somatosensory system with both perception and feedback functions was designed and constructed by integrating the flexible tactile sensors, synaptic transistor, artificial muscle, and the coupling circuit. Also, benefiting from the synaptic characteristics of the designed artificial synapse, the system shows spatio-temporal information-processing ability, which can further enhance the efficiency of the system. This research outcome has a potential contribution to the development of sensor technology from signal sensing to perception and cognition, which can provide a special paradigm for the next generation of bionic tactile perception systems towards e-skin, neurorobotics, and advanced bio-robots.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Introduction
Biological sensory systems, which can transduce stimuli (external or internal) into neural signals, are the interface between the human and the physical world to interpret the information and create our perception of the world1. As a part of the sensory system, the somatosensory system is special and vital in the human body2,3. It is not only associated with the sense of touch, but also includes parallel receptors and nerve pathways for the sensations of temperature, body position and movement, and pain. This complex system can provide sensory feedback to the central nervous system and respond to changes in the body. Benefiting from the somatosensory functions, the possibility of an injury on our bodies can be avoided or minimized4. Taking somatosensory feedback of the hand as an example, when a strong stimulus exceeding the threshold level is applied to the hand, the nociceptors in the somatosensory system will be activated to feel pain and trigger the body’s feedback to avoid further injury5. In this process, the sensation and feedback on the stimuli form a closed-loop, which is highly efficient and significant for humans and living creatures to interact with the environment6,7.
Bionic perception systems integrated with different sensors could perceive different external stimuli information, which have great potential in communicating with complex environments, recognizing objects, and engaging in social interaction. Traditional sensory systems relying on microprocessors and external circuits show high power consumption faced with the explosive growth of data8. Recently, the advancement in flexible electronics and neuromorphic electronics has opened up opportunities to construct artificial perception systems to emulate biological functions. Until now, neuromorphic devices with various structures, materials, and mechanisms have been proposed. such as memristors9,10, synaptic electrolyte gated transistors11,12, ferroelectric transistor13, and phase change memory14. There have been several reviews on the research progress of flexible artificial synapses in recent years11,15,16. Also, parts of the biological perception functions have been emulated by using neuromorphic devices. For example, Kim et al. proposed a bioinspired afferent nerve constructed with flexible pressure sensors, ring oscillators, and a synaptic transistor, which can detect, convert, and integrate pressure information17. Lee et al. reported an organic optoelectronic sensorimotor synaptic device that can realize the light-responsive actuation of artificial muscle actuators18. Furthermore, He et al. demonstrated an artificial somatic reflex arc that can mimic the all-or-none law in the human nervous system19. However, artificial systems that can mimic the somatosensory feedback functions have not been demonstrated yet.
Herein, we developed an artificial somatosensory system with both tactile perception and instant feedback capabilities by mimicking the human somatosensory feedback pathways. In order to achieve the somatosensory feedback functions, the flexible tactile sensors, synaptic transistor, artificial muscle, and the coupling circuit are used in our system. The spatio-temporal information-processing functions are realized by the combination of multiple sensors and multi-gate synaptic transistors. The instant feedback function was realized using an artificial muscle and a comparator in the system. The research outcome provides a special paradigm for the next generation of bionic tactile perception systems.
Results and discussion
Bioinspired artificial somatosensory system
Tactile perception and instant feedback of the somatosensory system of the human are complex activities involving the perception system, nervous system, and effector. They are mainly composed of mechanoreceptors, afferent nerves, CNS, efferent nerves, and muscle20. When the tactile stimulus is detected, the action potential will be generated and transmitted between the neurons via synapses to reach the CNS (spinal cord and brain). When weak stimuli are detected, the central nervous system can recognize the external stimulus and determine its amplitude. However, if strong stimuli are detected, the CNS will send messages to the brain to make it feel painful while recognizing it as an intense amplitude. Simultaneously, an action potential will be sent to the effector to avoid further injury as shown in Fig. 1a. Inspired by feedback pathways of the somatosensory system, an artificial somatosensory system with tactile perception and instant feedback capabilities was proposed, as shown in Fig. 1b. To achieve the somatosensory feedback functions, four main components are designed and used in the system, namely flexible tactile sensor, multi-gate synaptic transistors, coupling circuits, and artificial muscles, to sense, code, process the tactile stimulus, and trigger the artificial muscle when an intensive stimuli is detected.
Components of the artificial system
The schematic diagram and basic performance of the main components in the artificial system are shown in Fig. 2. For the flexible tactile sensor, carbon nanotubes/polyimide (CNT/PI) with pyramidal microstructure was used as the sensitive layer and the polyethylene terephthalate (PET) with Ag electrodes was used as the substrate, as shown in Fig. 2a21. The resistance change of the flexible tactile sensor caused by the applied force will be transformed into voltage signals with different frequencies using the Voltage-frequency conversion module (AD654). To achieve a wide response range of the sensor to applied pressure, a design of CNT/PI film using micro pyramid structures with multiple different sizes was proposed as shown in Fig. 2b. Figure 2c plots the response of the flexible tactile sensor with single and micro pyramid structures with multiple different sizes in the range of 0–30 N. The initial resistance of the device with a pyramidal microstructure with multiple different sizes (size of 10 and 25 μm) is about ten times than that of the device by using a single pyramidal microstructure (10 μm), as shown in Supplementary Fig. 1. Also, the sensitivity increased from 0.088 to 0.104 kPa−1 due to the existence of the pyramidal microstructure with multiple different sizes.
In2O3 and proton-conducting Sodium Alginate (SA) are used as the channel layer and dielectric gate layer of the synaptic transistor, respectively, as shown in Fig. 2d. The detailed fabricating process and the schematic diagrams for the working mechanism of the In2O3/SA-based synaptic transistor are shown in Supplementary Fig. 2 and Supplementary Fig. 3 of Supplementary Information22. Figure 2e presents the typical transfer characteristics of the In2O3/SA-based synaptic transistor. In the transfer curve, it is clear that the device exhibits a large on/off ratio of about 105 and a counterclockwise hysteresis, which are the foundations for the emulation of synaptic functions.
Moreover, benefitting from the flexible PI substrate, the transfer curve remains reliable under bending conditions which demonstrates great flexibility and reliability of the devices (Supplementary Fig. 4). The modulation of the channel current of the device under different presynaptic spikes with pulse widths ranging from 50 to 200 ms are shown in Fig. 2f indicating the excitatory postsynaptic potential (EPSC) of the devices. As a further imitation of synaptic function, the PPF and STDP functions of the devices can also be achieved (Supplementary Fig. 5 and Supplementary Fig. 6).
All these results imply that the flexible In2O3/SA-based synaptic transistor can be used to mimic the synaptic functions of the biological synapse and provides a foundation for the construction of the artificial somatosensory system.
Soft actuators, which include twisted fiber artificial muscles23,24, shape memory polymers (SMPs)25, and electrochemical actuators26 have received intensive attention in the fields of soft robots, sensors, and intelligent control27,28. As an important type of electrochemical actuator, the ionic polymer-metal composites (IPMC) actuator was employed as the artificial muscle in this system due to its advantages in low operating voltage and large deformation. The IPMC actuator was fabricated based on the SWCNTs, PVDF(HFP), and EMIMBF4, as shown in Fig. 2g, and the detailed process is shown in the Experimental section of the Supplementary Information. The actuation behavior of the artificial muscle is investigated by applying an input voltage signal (±3.0 V, 0.1 Hz) as shown in Fig. 2h. The bending mechanism of the IPMC actuator is due to the double-layer capacitance of the SWCNTs. In detail, when a voltage is applied to the actuator, cations, and anions in the gel electrolyte will be transferred to the cathode and anode layers, which leads to the formation of electrical-double layers. As a result, swelling of the cathode layer and shrinkage of the anode layer occurs. Consequently, the actuator bends to the anode side. The bending motion performance of the actuator was evaluated using an Electrochemical workstation and laser displacement sensors, as shown in Supplementary Fig. 7. A 40 mm*4 mm-wide thin strip was attached to the clip. The displacement of the actuator was tested by the laser displacement sensors under an alternating square wave (±3.0 V, 2 Hz). The largest displacement of the devices is about 0.3 mm. Besides, this process is repeated for 13 cycles as shown in Fig. 2i, which indicates the good reversibility and reliability of the IPMC actuator.
Spatio-temporal tactile perception functions
Various Mechanoreceptors, such as Meissner corpuscle, Pacinian corpuscle, Merkle complex, and Ruffini corpuscle play an essential role in the sensation of mechanical stimuli. As shown in Fig. 3a. Slowly-adapting type I and type II (SA-I, II) in the Merkel and Ruffini endings, which can produce sustained action potentials to respond to static pressure. The frequency of the action potentials rely on the the form of stimulus, and it will be transmitted by synapse to the brain, where the information is further processed29. The exist of the SA-I and II can lead the sensory organ sensitive to the intensity, time, and location of pressure. Inspired by the of SA-I and II in biological perception system, the flexible tactile sensor and the flexible synaptic transistor were integrated using the oscillator to achieve neural-like tactile perception. In this system, the voltage-frequency conversion module (AD654) and its peripheral circuit were used as the oscillator to convert analogy signals of the sensor to frequency signals, and the schematic diagram of the system is shown in Supplementary Fig. 8. Then, the recognition and tactile information processing are realized with the frequency signal as the pre-synaptic stimuli of the synaptic devices.
Figure 3b shows the output voltage signals of the oscillator triggered by the flexible tactile sensor with various stimuli. It is clear that the pulse frequency can be modulated by the applied force, indicating the conversion of pressure change to frequency change. Figure 3c shows the postsynaptic current (Ipost) of the flexible synaptic transistor stimulated by different pressures for the system, which indicates that the prepared system can achieve the EPSC functions triggered by different pressure similar to the biological tactile perception. Benefitting from the plasticity of the synaptic devices, our artificial perception systems containing synaptic devices can distinguish not only the magnitude but also the duration of pressure. Figure 3d shows the EPSCs of the systems stimulated by the stimuli with various durations at the same magnitude (25.1 N, 1.0 s, 1.9 s, and 2.8 s, respectively). As the duration increases from 1 to 2.8 s, there is a clear increase in the EPSCs.
To further explore the processing capabilities of the system for the intensity of the signals, the ratio between the maximum value and the initial value of Ipost (Am/Ai) for pressures with different magnitudes and durations are analyzed and plotted in Fig. 3e. The ratios of Am/Ai increase with the magnitudes or durations of pressures. The results indicate that the system is able to sense not only the magnitude but also the temporal information of stimuli, which will contribute to mimicking biological perception systems.
In addition to the temporal information, the determination of the spatiotemporal stimuli is also of great significance in biological sensory systems. The complex integration of multiple spatiotemporal is beneficial to the recognization of the objects, discrimination of texture, and reaction appropriately in social exchange30,31, as shown in Fig. 4a. In this work, the process was mimicked by using multiple sensors and multi-gate synaptic transistors, as shown in Fig. 4b. As described above, the drain current (Id) of the transistor is controlled by the ions from the electrolyte layer accumulated at the channel/electrolyte interface under the gate electric field. As a result, the gate-to-channel distances play a dominating role in the modulation of device conductivity. Therefore, a multi-gate synaptic transistor with different gate-to-channel distances was designed to investigate its influence on the EPSCs as shown in Fig. 4c, d. Figure 4e showed the transfer characteristics of the device with different gate-to-channel distances (Vd is 500 mV, Vg sweeps from −2.5 to 4 V, and the gate-to-channel distance of G300, G400, G500, and G600 are 300, 400, 500, and 600 μm, respectively). The drain current in the accumulation region decreases as the increase of gate-to-channel distances, which proves the control ability of the different gates. In order to further investigate the plasticity of the flexible synaptic transistor, gate voltage pulse (3 V, 100 ms) was applied in the multi-gate terminals and the EPSC response was recorded as shown in Supplementary Fig. 9. It is clear that the amplitude of the EPSC triggered by the same voltage spike decreases with the increase of the gate-to-channel distance, which proved that the devices have the potential to distinguish spatial information. To achieve the spatial tactile perceptual discrimination and integration capability of simulated biological skin, the prepared flexible sensors (S1 to S4) were connected to the multi-gate terminals of the synaptic transistors (S1 to G300, S2 to G400, S3 to G500, and S4 to G600, respectively) to simulate tactile stimuli at different locations, as shown in Fig. 4b. The stimuli were applied to the sensor of different locations and the EPSCs were tested from the synaptic transistors. From Fig. 4f, the EPSCs varies with the stimuli applied at different locations with the same duration and magnitude (32.5 N, 2 s). In order to describe the relationship between the location of the pressure and the postsynaptic response, the ratio of the maximum value of EPSC (Amax) to the initial value (Ai) is defined as L as shown in Supplementary Table 1. The gradual increase of L with the distance proved that the system contained multiple sensors and multi-gate synaptic transistors that can simulate dendritic discrimination of different spatiotemporal input sequences and is sensitive to spatial stimuli. In addition to the above spatial and temporal information resolution functions, spatial information integration is another important advantage of the tactile perception system based on artificial synaptic devices, which is different from ordinary tactile sensors. This process can be demonstrated in our systems using a weight, as shown in Fig. 4g. Weight was used to stimulate the flexible sensors and the sensors were connected to different gate terminals of the artificial synaptic device using AD654. When weights of the same mass were placed on the two sensors one by one, the resistance of the sensor changed and different EPSCs were achieved in the artificial synaptic transistor because of different gate distances. When the weights were placed on the two sensors at the same time, an increased EPSCs was obtained, which is the sum of the EPSCs obtained when weights are placed on each sensor individually. The information integration from two different gates results in a change in the EPSC amplitude, which can emulate spatial information integration correlated outputs.
Instant feedback and actuation functions
Except for tactile perception and signal processing, feedback is also an important function to mimic the somatosensory system. The pain feedback function depends on the free nerve endings throughout the body and follows ‘All or none’ laws. The nerves and muscles only have two states (maximum response or none at all) in the all-or-none law, and the response cannot be graded by grading the intensity or duration of the stimulus32,33. As a proof-of-concept, an artificial somatosensory system with instant feedback and actuation ability that follows ‘All or none’ laws was designed and constructed using an IPMC. The system contained a flexible tactile sensor, an oscillator, a synaptic transistor, an I–V TIA, a comparator, and an artificial muscle (Fig. 5a), which can sense, process the external tactile stimulus, and trigger the artificial muscle when intense stimuli are sensed. Figure 5b shows the EPSC responses of the synaptic transistor triggered by voltage pulses with different pulse widths (3 V, 50 ms, 100 ms, and 150 ms, respectively). The increase of the EPSCs with the pulse width provides a basis for the determination of the threshold current and stimulates artificial muscles. The output signals of the synaptic transistors were converted by an I–V TIA and a comparator to stimulate artificial muscles. The schematic circuit diagram of the I–V TIA and comparator are shown in Supplementary Figs. 10 and 11, respectively. Figure 5c shows the output signal of the TIA (blue curve) and the comparator (red curve) when the flexible tactile in the artificial system is stimulated by different pressures. The blue curve indicates that the output signals of the artificial synaptic transistor can be accurately amplified into voltage signals. The red curve demonstrates that the artificial system can process the signals generated by different pressures using a comparator and determine whether the pressure reaches the threshold to stimulate the artificial muscles. Figure 5d shows the optical photograph of the artificial muscles in the artificial system stimulated by different pressures, which indicated that the IPMC can be triggered controllably by different tactile stimulation (the result can also be seen in Supplementary Movie 1). The above results show that our system can imitate the biological somatosensory system and realize the function of instant feedback.
Inspired by biological somatosensory systems, an artificial somatosensory system with tactile perception and instant feedback functions was demonstrated in this work. Owing to the coupling of the multiple flexible tactile sensors and multi-gate synaptic transistors, the system can achieve the temporal and spatiotemporal information-processing ability for the tactile stimulus. Artificial muscle can be triggered controllably by different tactile stimulation. The system can mimic the somatosensory feedback functions, which shows the ability in imitating the biological somatosensory system. the research outcome shows a potential to provide a promising strategy for next-generation bionic tactile perception systems.
Methods
Preparation of flexible tactile sensor
Si mold with different micro-pyramids was prepared by conventional photolithography. Afterward, 5 mg SWCNTs were added in 100 mL N, N-dimethylformamide (DMF) and dispersed ultrasonically for 2.5 h. Then spray-coat the solution on the Si mold on a 150 °C hot plate (IKA, HP4). Afterward, the prepared polyimide (PI) solution diluting with NMP was spinning coated on Si mold to obtain the SWCNT/PI thin films with a pyramid pattern. Next, the Si mold covered with SWCNT/PI was cured at 270 °C for 1 h. PET substrate with Ag electrodes was prepared by screen printing method. A sealant was used to attach the SWCNT/PI thin films with pyramid microstructure to PET substrate with Ag electrodes and finally obtain the flexible tactile sensor. The detailed fabrication process of PI films is similar to our previous work21,34.
Preparation of the flexible synaptic transistors
A diluted polyimide (PI) solution was spin-coated on the cleaned glass and cured on the hot plate (IKA, HP4) at 270 °C for 1 h to obtain the PI film. Then electrodes (Ti/Au) were deposited on the PI substrate by a traditional photolithography method. The aqueous In2O3 precursor solution was prepared by dissolving 0.3 M indium nitrate hydrate (In(NO3) ∙ H2O) into deionized (DI) water and then stirred vigorously for 10 min. In2O3 film was obtained by spin-coating the precursor solution in PI substrate and annealing at 300 °C under ambient atmosphere for 1 h. Finally, 5 μL 2% wt SA solution was dropped on top of the active regions as a dielectric layer. The sample was cured on a hot plate at 50 °C for 30 min. The detailed fabrication process was described in our previous work22.
Preparation of the IPMC actuators
The IPMC actuators were prepared according to the methods in the literature35,36. Typically, PVDF(HFP), SWCNTs, and EMIMBF4 were added in turn to DMF and dispersed using ultrasonication to obtain the electrode solution. The mixture solution was cast on the rubber mold in glass (45 mm*45 mm*5 mm), and evaporating the solvent (60 °C, 12 h) to obtain the electrode film. The gel electrolyte film was prepared using the PVDF(HFP) and EMIMBF4 in the same method. The IPMC actuator film was fabricated by hot-pressing the electrode film and gel electrolyte film in 130 °C and 3 min.
Preparation of the circuit
AD654 was used in the construction of the pressure-to-frequency converter. The flexible tactile sensor was connected to the signal input terminal. The change of resistance can cause the change of the input voltage, and finally leads to the output of voltage signals with different frequencies (Supplementary Fig. 8).
AD825 was used as the main chip of the I–V transimpedance amplifier module, which used a T-shaped feedback network to convert a small current into a voltage signal. An adjustable inverting amplifier NE5532 was used in the second stage to amplify the voltage signal with a suitable range.
LM393 and S8050 were used in the comparator judgment circuit. The non-inverting (+IN) input is tied to a reference voltage (Vref), and the inverting (−IN) input is tied to the input signal (Vin).
Device characterization and system testing
The surface morphology of PI/SWCNT film was investigated by scanning electron microscope (SEM, Hitachi Regulus S-4800) at an accelerating voltage of 5 kV. The mechanical test of the flexible tactile sensor was tested by a customized apparatus including a source meter (Keithley 2602), a variable resistor, a pressure inductor, and a translation stage (Beijing Optical Century Instrument Co., LTD. Series SC100 stepper motor controllers). The electrical measurements of the In2O3-based synaptic transistor were performed using the Agilent B1500A semiconductor parameter analyzer. The electrical measurement in the circuit was tested using the oscilloscope (Tektronix DPO2012B). Current–voltage curves of the IPMC were obtained using an Electrochemical workstation (CHI990D). Displacement measurement of the IPMC was obtained using the laser displacement sensors (Keyence, LK-H052) and a waveform generator (Agilent 33510B).
Data availability
All data that support the findings of this study are available from the corresponding author upon reasonable request.
Code availability
All codes that support the findings of this study are available from the corresponding author upon reasonable request.
References
Abraira, V. E. & Ginty, D. D. The sensory neurons of touch. Neuron 79, 618–639 (2013).
Grace Gaerlan, M., Alpert, P. T., Cross, C., Louis, M. & Kowalski, S. Postural balance in young adults: The role of visual, vestibular and somatosensory systems. J. Am. Acad. Nurse Pract. 24, 375–381 (2012).
Ebner, F. F. & Kaas, J. H. The Rat Nervous System, 4th edn (ed Paxinos, G.) 675–701 (Academic Press, 2015).
Ager, A. L. et al. Proprioception: How is it affected by shoulder pain? A systematic review. J. Hand Ther. 33, 507–516 (2020).
Martín-Alguacil, N., de Gaspar, I., Schober, J. M. & Pfaff, D. W. Neuroscience in the 21st Century: From Basic to Clinical (ed Pfaff, D. W.) 743–780 (Springer New York, 2013).
Collinger, J. L. et al. Collaborative approach in the development of high‐performance brain–computer interfaces for a neuroprosthetic arm: Translation from animal models to human control. Clin. Transl. Sci. 7, 52–59 (2014).
Velliste, M., Perel, S., Spalding, M. C., Whitford, A. S. & Schwartz, A. B. Cortical control of a prosthetic arm for self-feeding. Nature 453, 1098–1101 (2008).
Hammock, M. L., Chortos, A., Tee, B. C.-K., Tok, J. B.-H. & Bao, Z. 25th anniversary article: The evolution of Electronic Skin (E-Skin): A brief history, design considerations, and recent progress. Adv. Mater. 25, 5997–6038 (2013).
Sun, K., Chen, J. & Yan, X. The future of memristors: Materials engineering and neural networks. Adv. Funct. Mater. 31, 2006773 (2021).
Huh, W., Lee, D. & Lee, C. H. Memristors based on 2D materials as an artificial synapse for neuromorphic electronics. Adv. Mater. 32, 2002092 (2020).
Shao, L., Zhao, Y. & Liu, Y. Organic synaptic transistors: The evolutionary path from memory cells to the application of artificial neural networks. Adv. Funct. Mater. 31, 2101951 (2021).
Wang, D. et al. Recent advanced applications of ion-gel in ionic-gated transistor. npj Flex. Electron. 5, 1–16 (2021).
Ham, S. et al. One-dimensional organic artificial multi-synapses enabling electronic textile neural network for wearable neuromorphic applications. Sci. Adv. 6, eaba1178 (2020).
Khan, A. I. et al. Ultralow–switching current density multilevel phase-change memory on a flexible substrate. Science 373, 1243–1247 (2021).
Sun, F., Lu, Q., Feng, S. & Zhang, T. Flexible artificial sensory systems based on neuromorphic devices. ACS Nano 15, 3875–3899 (2021).
Seo, D.-G., Go, G.-T., Park, H.-L. & Lee, T.-W. Organic synaptic transistors for flexible and stretchable artificial sensory nerves. MRS Bull. 46, 321–329 (2021).
Kim, Y. et al. A bioinspired flexible organic artificial afferent nerve. Science 360, 998–1003 (2018).
Lee, Y. et al. Stretchable organic optoelectronic sensorimotor synapse. Sci. Adv. 4, eaat7387 (2018).
He, K. et al. An artificial somatic reflex arc. Adv. Mater. 32, 1905399 (2020).
Horch, K. W. & Kipke, D. R. Neuroprosthetics: Theory and Practice Vol. 8 (World Scientific, 2017).
Sun, F. et al. Novel flexible pressure sensor combining with dynamic-time-warping algorithm for handwriting identification. Sens. Actuators, A 293, 70–76 (2019).
Sun, F. et al. Bioinspired flexible, dual‐modulation synaptic transistors toward artificial visual memory systems. Adv. Mater. Technol. 5, 1900888 (2020).
Liu, Z. et al. Somatosensitive film soft crawling robots driven by artificial muscle for load carrying and multi-terrain locomotion. Mater. Horiz. 8, 1783–1794 (2021).
Leng, X. et al. Tuning the reversibility of hair artificial muscles by disulfide cross-linking for sensors, switches, and soft robotics. Mater. Horiz. 8, 1538–1546 (2021).
Xia, Y., He, Y., Zhang, F., Liu, Y. & Leng, J. A review of shape memory polymers and composites: Mechanisms, materials, and applications. Adv. Mater. 33, 2000713 (2021).
Mukai, K. et al. Highly conductive sheets from millimeter‐long single‐walled carbon nanotubes and ionic liquids: Application to fast‐moving, low‐voltage electromechanical actuators operable in air. Adv. Mater. 21, 1582–1585 (2009).
Zou, M. et al. Progresses in tensile, torsional, and multifunctional soft actuators. Adv. Funct. Mater. 31, 2007437 (2021).
Zhou, X., Fang, S., Leng, X., Liu, Z. & Baughman, R. H. The power of fiber twist. Acc. Chem. Res. 54, 2624–2636 (2021).
Johansson, R. S. & Flanagan, J. R. Coding and use of tactile signals from the fingertips in object manipulation tasks. Nat. Rev. Neurosci. 10, 345–359 (2009).
Fernandes, A. M. & Albuquerque, P. B. Tactual perception: A review of experimental variables and procedures. Cogn. Process. 13, 285–301 (2012).
Choi, S. et al. Parallel ascending spinal pathways for affective touch and pain. Nature 587, 258–263 (2020).
Lucas, K. The “all or none” contraction of the amphibian skeletal muscle fibre. J. Physiol. 38, 113–133 (1909).
Wang, L., Ma, L., Yang, J. & Wu, J. Human somatosensory processing and artificial somatosensation. Cyborg. Bionic. Syst. 2021, 9843259 (2021).
Gu, Y. et al. Flexible electronic eardrum. Nano Res. 10, 2683–2691 (2017).
Terasawa, N., Takeuchi, I. & Matsumoto, H. Electrochemical properties and actuation mechanisms of actuators using carbon nanotube-ionic liquid gel. Sens. Actuators, B. 139, 624–630 (2009).
Fukushima, T., Asaka, K., Kosaka, A. & Aida, T. Fully plastic actuator through layer-by-layer casting with ionic-liquid-based bucky gel. Angew. Chem., Int. Ed. 44, 2410–2413 (2005).
Acknowledgements
The authors acknowledge the funding support from China Postdoctoral Science Foundation (2022M712323), the National Key R&D Program of China (2018YFB1304700, 2020YFB2008501), the National Natural Science Foundation of China (62071463, 62071462, 22109173), the National Science Fund for Distinguished Young Scholars (62125112) and XJTLU Research Development Funding (RDF-21-01-027). The authors are grateful for the technical support for Nano-X from Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences (SINANO).
Author information
Authors and Affiliations
Contributions
F.S. and T.Z. designed the project and experiments. F.S. and Q.L. prepared the manuscript. M.H. and Y.W. participated in the device fabrications and electrical measurements analyzed. Y.L., L.L., and Y.W. discussed the data. L.L. helped with manuscript figures and writing. All authors reviewed the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Sun, F., Lu, Q., Hao, M. et al. An artificial neuromorphic somatosensory system with spatio-temporal tactile perception and feedback functions. npj Flex Electron 6, 72 (2022). https://doi.org/10.1038/s41528-022-00202-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41528-022-00202-7
- Springer Nature Limited
This article is cited by
-
Ultrafast readout, crosstalk suppression iontronic array enabled by frequency-coding architecture
npj Flexible Electronics (2024)
-
A bioinspired tactile scanner for computer haptics
Nature Communications (2024)
-
Memristor-based artificial tactile perception systems with integrated functions of sensing, storage and computing
Science China Materials (2024)
-
A general strategy for manufacturing flexible synaptic transistors with high mechanical stability
Science China Materials (2023)