Abstract
Charge-density-waves, which occur mainly in low-dimensional systems, have a macroscopic wave function similar to superfluids and superconductors. Kosterlitz–Thouless transition is observed in superfluids and superconductors, but the presence of Kosterlitz–Thouless transition in ultra-thin charge-density-waves systems has been an open problem. We report the direct real-space observation of charge-density-waves with new order states in mono-layer, bi-layer, and tri-layer 1T-TaS2 crystals using a low voltage scanning-transmission-electron-microscopy without a substrate. This method is ideal to observe local atomic structures and possible defects. We clearly observed that the mono-layer crystal has a new triclinic stripe charge-density-waves order without satisfying the triple q condition q1 + q2 + q3 = 0. A strong electron-phonon interaction gives rise to new crevasse (line) type defects instead of disclination (point) type defects due to the Kosterlitz–Thouless transition. These results reaffirm the importance of the electron-phonon interaction in mono-layer nanophysics.
Similar content being viewed by others
Introduction
Dimensionality and topology are the most important parameters characterizing physical systems. For example, the integral and fractional quantum Hall effects (QHE)1, 2 are observed only in two-dimensional systems such as metal-oxide-semiconductor field-effect transistors, GaAs/AlGaAs interfaces, and graphene.3 Moreover, the conductivity of the QHE is characterized by topological numbers. Dimensionality and topology are also of importance in the Kosterlitz-Thouless (KT) transitions.4, 5 The KT transition is a phase transition that occurs only in a two-dimensional XY model, and vortices or vortex-pairs (topological defects) are known to play an important role. KT transitions are observed in systems that have macroscopic wave functions (MWF) such as two-dimensional superconductors6 and ultrathin film superfluids.
Charge density wave (CDW)7, 8 is a phenomenon in which dimensionality and topology are of particular importance. A CDW is a modulation of electric charge in low-dimensional conductors caused by electron-phonon coupling and has a MWF 9 such as superconductors, superfluids and quantum Hall liquids. Additionally, the properties of a CDW are changed depending on its topology.10,11,12
Tantalum disulfide with hexagonally packed TaS6 (1T-TaS2 (Fig. 1(a)) is a typical CDW material. 1T-TaS2 is a layered compound called a transition metal dichalcogenides (MX2), which induces two-dimensional CDW with wave-number vectors q i (i = 1, 2, 3) termed triple q (Fig. 1(b)). MX2 belongs to the group of van der Waals materials characterized by their layered crystalline structures. A CDW in this material takes four different states depending on temperature (Fig. 1(c)).
How do the CDW properties change when we use thin samples? There is a possibility that the properties differ from those in higher layers (bulks).13,14,15 There has been a recent debate on whether the commensurate CDW phase exists in ultrathin films of 1T-TaS2.16,17,18,19,20 However, the samples considered in these studies either contain a substrate or interacts with the surrounding environment, which inevitably alter the properties of the material. However, it is possible that different CDW phases emerge in standing-free ultrathin 1T-TaS2 as the thickness decreases down to a single layer. For example, the KT transition may occur in CDW systems.
In this paper, we report the properties of 1T-TaS2 ultra-thin films including a mono-layer. We obtained images of 1T-TaS2 using scanning transmission electron microscopy (STEM). Figure 2 clearly shows an image of the crystal structure. STEM is a measurement method that does not require a substrate and causes little or no damage to the samples. Therefore, STEM is well suited for the measurement of ultrathin samples. We were able to make mono-, bi-, and tri-layer 1T-TaS2 samples using the exfoliation method (c.f. Method section) for the first time. Therefore we used this technique to observe formation of different CDW phases in tri-layer, bi-layer, and mono-layer samples.
Results
Tri-layer CDW
Figure 3(a) shows an STEM image of 1T-TaS2 at room temperature. Figure 3(b) is a three-dimensional intensity plot of the area shown by the yellow frame in Fig. 3(a). As seen from the figure, the brown circles form hexagonal lattices. It is a feature of Commensurate (C-) CDW that super-lattices of C-CDW form such large hexagonal lattices (Figs. 3(d) and 3(e)).
Figure 3(c) shows a Fourier transformed image (FTI) of Fig. 3(a), where certain satellite peaks are present. The appearance of powerful satellites is a feature of C-CDW state. The q vectors are calculated from Fig. 3(c) with the values of |q| = (0.280(8) ± 0.003)|a ∗| that is rotated by ψ = 13.3(7) ± 1.2° with respect to the Bragg spots. The C-CDW satellites were confirmed in at least 10 other STEM images of 1T-TaS2 samples (Supplementary material 1). These results are in good agreement with the reported values for the C-CDW state: |q| = (0.277 ± 0.003)|a ∗|, ψ = 13.90°.15 From the above evidence, we surprisingly discovered that C-CDW occurs in tri-layer 1T-TaS2 at room temperature. Figure 3(f) shows the satellite patterns of the tri-layer sample. The triple q condition is clearly preserved.
Bi-layer CDW
Figure 4(a) shows a STEM image of the bi-layer 1T-TaS2 at room temperature. The CDW super-lattices in the bi-layer are different from those in the tri-layer. Figure 4(b) shows a FTI of Fig. 4(a). The CDW satellites are largely diffused. Thus, a super-lattice is also present in the bi-layer (Figs. 4(c) and 4(d)) but it is not as clearly defined as in the case of the tri-layer. However, it is obvious that there are triple q vectors (Table 1(b)). This CDW has anisotropic triple q vectors such as T-phase14, 15, 21 and stripe phase.22 For these types, the CDWs form domains with domain walls corresponding to discommensuration.23 Consequently, the system minimizes its energy by making super-lattices in these domains similar to those in the C-phase. For this reason, it is valid to consider that domains are formed in this sample. Figure 4(c) shows an enlarged view of the yellow frame in Fig. 4(a) with inverted contrast. The size of Fig. 4(c) is 100 Å squared. The size is similar to the C-CDW domain size in the NC or T-phase.14, 15, 24 However, the C-type super-lattices such as those in the tri-layer crystal are not observed in Fig. 4(c). Figure 4(d) shows the FTI of Fig. 4(c) and the result is similar to Fig. 4(b). We performed Fourier transforms (FT) at different locations in Fig. 4(a) and confirmed similar satellite patterns. The sizes of domains that exist in the bi-layer crystal appear to be smaller than those in the bulk material. Unlike the tri-layer samples, clear super-lattices and honeycomb lattices are not seen. In view of the q vector’s length, the CDW state in bi-layer is similar to the stripe phase in 2H-TaSe2.22 Figure 4(f) shows the satellite patterns of the bi-layer samples. It is shown that the triple q conditions start to be broken.
Mono-layer CDW
Figure 5(a) shows an image of mono-layer 1T-TaS2 at room temperature. The mono-layer sample is different from the tri-layer and bi-layer samples. There are shade lines (crevasses) visible in the figure, and super-lattices are present in the yellow square marked D. These crevasses were not found in the bi-layer and tri-layer crystals. Figure 5(b) shows the intensity profile along the red line in D. The ordered structures do not have long-range correlation and exist as domains. Figure 5(c) shows an enlarged view of the yellow frame in Fig. 5(a). The contrast of this image is reversed from Fig. 5(a) and thus the black points correspond to Ta atoms. The super-lattices shown by blue circles do not form a hexagonal structure (Fig. 5(c)). Figure 5(d) is the FTI of the yellow frame in Fig. 5(a). We confirm similar satellite patterns by performing FT at different location in Fig. 5(a). The properties of these satellites are shown in Table 1(c). The triple q vectors in the mono-layer break the threefold symmetry similar to the T-phase (Fig. 5(e)).14, 15
Discussion and conclusion
Here, we summarize the results presented in the previous sections. In the tri-layer samples, C-CDW clearly occurs even at room temperature. This result is surprising because the C-CDW phase does not appear in the bulk samples above 220 K (Fig. 1(c)). In the bi-layer samples, satellites similar to the stripe phase in 2H-TaSe2 are observed. Moreover, satellites similar to the T-phase in 1T-TaS2 are present in the mono-layer samples. However, these phases were not observed at room temperature in the bulk samples. In particular, the latter two have never been observed in the bulk samples without the cooling-heating cycle (Fig. 1(c)). To explain these results, we consider the following mechanisms.
First, the CDW in the tri-layer sample is C-type. This can be explained by the negative pressure effect. The CDW transition temperature (T CDW) of MX2 shows an increasing tendency with increasing interlayer distance.26 In fact, the T CDW is increased by mechanical exfoliation in TiSe2.27 The C-phase was not observed in refs16,17,18 probably because their samples were not standing-free and the negative pressure was lost. However, evidences of the C-phase were reported in mono-layer at low temperature (not standing-free)19 and in the surface of a thick 1T-TaS2 sample20 where the negative pressure effect takes a dominant role.
Second, we consider the bi-layer and mono-layer results. It is difficult to apply the above discussion to bi-layers and mono-layers because these phases should not exist under the conditions of this measurement (Fig. 1(c)). Previous studies have considered that the stabilization of structures with anisotropic charge configurations such as the stripe phase (bi-layer) and the T-phase (mono-layer) can be explained by the inter-layer Coulomb interaction. The conventional Ginzburg–Landau approaches23, 24 support this idea. However, the stabilization of a structure such as the T-phase in mono-layer cannot be explained by the inter-layer Coulomb interaction. Therefore, we require a new mechanism.
Rotational-symmetry-breaking point defects such as vortices or disclinations were not discovered during a detailed survey of Fig. 5(a). There is a fundamental difference between defects in CDW and defects in superconductivity. In superconducting systems, a point defect such as an Abrikosov vortex attempts to be formed. On the other hand, in CDW systems, an in-plane line defect such as a domain wall attempts to be formed. In fact, domains are inevitably generated in the T-phase and the stripe phase. There is a difference between two domains in the CDW phase θ of the CDW MWF Ψ = |Ψ| exp(iθ). Therefore, the entropy increases because the degree of freedom of the phase θ becomes large. In other words, a CDW does not need to generate vortices because it has topological defects equivalent to vortices in the KT phase from the start. Accordingly, we can conclude that there are no vortices or vortex-pairs in 1T-TaS2.
To explain the structures in the bi-layer and mono-layer samples, it is necessary to reconsider triple q. This condition exists for the three-dimensional order of CDW.28 If triple q is broken, the discrepancy between conventional studies and the bi- and mono-layer results is resolved, because traditional theories are based on triple q and three-dimensional crystals (bulk). An examination of Fig. 3(f), Fig. 4(e) and Fig. 5(e) reveals that triple q is broken with decreasing dimensionality. Moreover, the stripe structure in the mono-layer emerges because triple q is broken (Fig. 5(f)).
In conclusion, CDWs occur in tri-layer, bi-layer and mono-layer crystals. In a mono-layer sample, the CDW does not exhibit the KT phase that accompanies disclination type defects. Instead, we found CDW with domain wall type defect structures. This structure is a new triclinic stripe state without satisfying condition q 1 + q 2 + q 3 = 0. It is not necessary to maintain triple q in pure two-dimensional CDW systems (Table 1(c), Table 1(d)). Consequently, new states are created in the mono-layer and bi-layer samples. The stripe structure formed by breaking the triple q condition in the mono-layer may be useful for understanding other stripe structures such as copper oxides29 and iron-based superconductors30 in terms of anisotropic charge order. Moreover, a strong electron-phonon interaction forms shadow crevasses (Figs. 5(a) and 5(f)). This shows that the electron-phonon interaction is of central importance in thinned samples. This idea is applied to systems in which an electron-electron interaction plays the most important role such as charge order in organic conductors.31, 32 New equations and models are needed if we are to realize pure two-dimensional systems. In addition, it is suggested that breaking of three-dimensional order causes new structures to be formed.
Methods
Sample preparation
The single crystals of 1T-TaS2 were grown in excess sulphur by the usual iodine vapor transport method. The prereacted powder of 1T-TaS2 and a certain amount of excess sulphur were put in one end of a quartz tube and the tube was sealed in vacuum. The ampule was heat-treated in such a way that the mixture at one end of the quartz tube was at 950–830 °C and the temperature of the other end was 70–80 °C lower. It was found that single crystals were grown not only in the lower temperature end but also in the hotter one. The quartz tube was rapidly quenched into water to insure the retention of the 1T-phase.
Exfoliation
The thin samples are made using the exfoliation method. That is, the presence of the van der Waals gap with bonding makes it possible to exfoliate films of MX2 with various thicknesses from its bulk in a similar manner to graphite. Some of the flakes were randomely chosen and cleaved using Scotch tapes and then transferred to transmission electron microscope microgrids following the method developed by Meyer and co-workers.33
Scanning transmission electron microscope
We used low voltage scanning transmission electron microscope (STEM). This method does not require a substrate and causes little or no damage to the samples.34 Therefore, STEM is well suited for the measurement of ultrathin samples. We used this technique to observe formation of different CDWs in tri-layer, bi-layer, and mono-layer samples.
References
Ando, T. Theory of quantum transport in a two-dimensional electron system under magnetic fields. III. many-site approximation. J. Phys. Soc. Jpn. 37, 622–630 (1974).
Klitzing, K. V., Dorda, G. & Pepper, M. New method for high-accuracy determination of the fine-structure constant based on quantized hall resistance. Phys. Rev. Lett. 45, 494–497 (1980).
Novoselov, K. S. et al. Two-dimensional gas of massless Dirac fermions in graphene. Nature 438, 197–200 (2005).
Kosterlitz, J. M. & Thouless, D. J. Ordering, metastability and phase transitions in two- dimensional systems. J. Phys. C: Solid State Phys 6, 1181–1203 (1973).
Bishop, J. D. & Reppy, D. J. Study of the superfluid transition in two-dimensional 4He films. Phys. Rev. Lett. 40, 1727–1730 (1978).
Beasley, M. R., Mooij, J. E. & Orlando, T. P. Possibility of vortex-antivortex pair dissociation in two-dimensional superconductors. Phys. Rev. Lett. 42, 1165–1168 (1979).
Wilson, J. A., Disalvo, F. J. & Mahajan, S. Charge-density waves in metallic, layered, transition-metal dichalcogenides. Phys. Rev. Lett. 32, 882–885 (1974).
Grüner, G. The dynamics of charge-density waves. Rev. Mod. Phys. 60, 1129–1181 (1988).
Grüner, G., Density aves in Solids, 32 (Addison-Wesley, 1994).
Hosokawa, T., Matsuura, T., Tsubota, M. & Tanda, S. Single-valuedness problem on charge density wave rings. Europhys. Lett. 112, 27005 (2015).
Tsubota, M., Inagaki, K., Matsuura, T. & Tanda, S. Aharonov-Bohm effect in charge-density wave loops with inherent temporal current switching. Europhys. Lett. 97, 57011 (2012).
Wilson, J. A., DiSalvo, F. J. & Mahajan, S. Charge-density waves and superlattices in the metallic layered transition metal dichalcogenides. Adv. Phys. 24, 177–201 (1975).
Hovden, R. et al. Atomic lattice disorder in charge-density-wave phases of exfoliated dichalcogenides (1T-TaS2). PNAS 113, 11420–11424 (2016).
Tanda, S., Sambongi, T., Tani, T. & Tanaka, S. X-ray study of charge density wave structure in 1T-TaS2. J. Phy. Soc. Jpn. 53, 476–479 (1984).
Tanda, S. & Sambongi, T. X-ray study of the new charge-density-wave phase in 1T-TaS2. Synth. Met 11, 85–100 (1985).
Yu, Y. et al. Gate-tunable phase transitions in thin flakes of 1T-TaS2. Nat. Nanotechnol. 10, 270–276 (2015).
Yoshida, M. et al. Controlling charge-density-wave states in nano-thick crystals of 1T-TaS2. Sci. Rep. 4, 7302 (2014).
Tsen, A. W. et al. Structure and control of charge density waves in two-dimensional 1T-TaS2. PNAS 112, 5054–15059 (2015).
Albertini, R. et al. Zone-center phonons of bulk, few-layer, and monolayer 1T-TaS2: Detection of commensurate charge density wave phase through Raman scattering. Phys. Rev. B 93, 214109 (2016).
He, R. et al. Distinct surface and bulk charge density waves in ultrathin 1T-TaS2. Phys. Rev. B 94, 201108(R) (2016).
Coleman, R. V. et al. Scanning tunnelling microscopy of charge-density waves in transition metal chalcogenides. Adv. Phys. 37, 559–644 (1988).
Fleming, R. M., Moncton, D. E., McWhan, D. B. & DiSalvo, F. J. Broken hexagonal symmetry in the incommensurate charge-density wave structure of 2H-TaSe2. Phys. Rev. Lett. 45, 576–579 (1980).
McMillan, W. L. Theory of discommensurations and the commensurate-incommensurate charge-density-wave phase transition. Phys. Rev. B 14, 1496–1502 (1976).
Nakanishi, K. & Shiba, H. Theory of three-dimensional orderings of charge-density waves in 1T-TaX2 (X: S, Se). J. Phys. Soc. Jpn. 53, 1103–1113 (1984).
Giambattista, B., Slough, C. G., McNairy, W. W. & Coleman, R. V. Scanning tunneling microscopy of atoms and charge-density waves in 1T-TaS2, 1T-TaSe2, and 1T-VSe2. Phys. Rev. B 41, 10082–10103 (1990).
Calandra, M., Mazin, I. I. & Mauri, F. Effect of dimensionality on the charge-density wave in few-layer 2H-NbSe2. Phys. Rev. B 80, 241108(R) (2009).
Goli, P., Khan, J., Wickramaratne, D., Lake, R. K. & Balandin, A. A. Charge density waves in exfoliated films of van der Waals materials: Evolution of Raman spectrum in TiSe2. Nano Lett. 12, 5941–5945 (2012).
Anderson, P. W., Basic Notions of Condensed Matter Physics, 40 (Addison-Wesley, 1984).
Tranquada, J. M. et al. Evidence for stripe correlations of spins and holes in copper oxide superconductors. Nature 375, 561–563 (1995).
Kawashima, Y. et al. Charge stripe structure in Fe1+xTe by STM. Solid State Commun 167, 10–13 (2013).
Seo, H., Merino, J., Yoshioka, H. & Ogata, M. Theoretical aspects of charge ordering in molecular conductors. J. Phys. Soc. Jpn. 75, 051009 (2006).
Monceau, P. Electronic crystals: an experimental overview. Adv. in Phys. 61, 325–581 (2012).
Pacile, D., Meyer, J. C., Girit, C. O. & Zettl, A. The two-dimensional phase of boron nitride: few-atomic-layer sheets and suspended membranes. Appl. Phys. Lett. 92, 133107 (2008).
Lin, Y. C. et al. Three-fold rotational defects in two-dimensional transition metal dichalcogenides. Nat. Commun. 6, 6736 (2015).
Acknowledgements
We thank Toshiro Tani, late Shoji Tanaka and late Takashi Sambongi for the instruction of sample preparation techniques and donation of some of the samples used in this experiment. We also thank the aforementioned professors, Koichi Ichimura, Toru Matruura and Junya Ishioka for stimulating discussions. Zheng Liu and Kazutomo Suenaga acknowledge support from Grant-in-Aid for Scientific Research on Innovative Areas (MEXT KAKENHI Grant No. 25107003) and the JST Research Acceleration Program. This work was supported by JSPS KAKENHI (No. 26287069).
Author information
Authors and Affiliations
Contributions
K.S. and S.T. contributed to the original idea and supervised the project. S.T. and D.S. contributed sample preparation. Z.L., K.S., S.T. performed the experiment. D.S., Z.L. and S.T. analyzed the data. All authors contributed to the interpretation of the results. D.S., K.N. and S.T. wrote the manuscript and supplementary materials. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Sakabe, D., Liu, Z., Suenaga, K. et al. Direct observation of mono-layer, bi-layer, and tri-layer charge density waves in 1T-TaS2 by transmission electron microscopy without a substrate. npj Quant Mater 2, 22 (2017). https://doi.org/10.1038/s41535-017-0025-8
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41535-017-0025-8
- Springer Nature Limited
This article is cited by
-
Electronic structures and Mott state of epitaxial TaS2 monolayers
Science China Physics, Mechanics & Astronomy (2024)
-
Two-dimensional charge order stabilized in clean polytype heterostructures
Nature Communications (2022)
-
Zoology of domain walls in quasi-2D correlated charge density wave of 1T-TaS2
npj Quantum Materials (2021)
-
Scanning tunneling spectroscopic study of monolayer 1T-TaS2 and 1T-TaSe2
Nano Research (2020)