Abstract
Tephra deposits result from explosive volcanic eruption and serve as indirect probes into fragmentation processes operating in subsurface volcanic conduits. Primary magmatic fragmentation creates a population of pyroclasts through volatile-driven decompression during conduit ascent. In this study, we explore the role that secondary fragmentation, specifically attrition, has in transforming primary pyroclasts upon transport in volcanic conduits and plumes. We utilize total grain size distributions from a suite of natural and experimentally produced tephra to show that attrition is likely to occur in all explosive volcanic eruptions. Our experimental results indicate that fine ash production and surface area generation is fast (<15 min) thereby rapidly raising the fractal dimension of tephra deposits. Furthermore, a new metric, the Entropy of Information, is introduced to quantify the degree of attrition (secondary fragmentation) from grain size data. Attrition elevates fine ash production which, in turn, has consequences for eruption column stability, tephra dispersal, aggregation, volcanic lightening generation, and has concomitant effects on aviation safety and Earth’s climate.
Similar content being viewed by others
Introduction
Ash released by explosive volcanic eruption can adversely affect air traffic1, 2, human health3, agriculture4, urban infrastructure and contributes to short term global climate change5. Eruptions featuring higher fine ash contents pose greater risk. Despite these significant societal impacts, the timing, rates, and sources of fine ash generation within explosive eruptions remain controversial. Total grain size distributions (TGSDs) of pyroclastic deposits indirectly inform on volcanic fragmentation processes. However, many TGSDs are bimodal suggesting multiple mechanisms, or events, of fragmentation and for which there is no single explanation6. Here, we show that attrition, driven by particle-particle interactions, is an efficient form of secondary fragmentation that must operate in all explosive eruptions. Experiments on pumice provide rates of ash production and support a preferential grain size reduction with increasing fragmentation depth and eruption column height. Attrition-driven ash production impacts eruption column stability, tephra dispersal, aggregation, volcanic lightening generation, and has concomitant effects on aviation safety and Earth’s climate.
Tephra deposits result from explosive volcanic eruption and serve as indirect probes into fragmentation processes operating in subsurface volcanic conduits. Most ash results from magmatic fragmentation within the subterranean conduit wherein volatile exsolution and expansion transform the rising bubbly magma into a gas jet loaded with a chaotic suspension of poorly sorted fragments of the disrupted magma7. In principle, the reconstructed TGSD’s and componentry of the tephra deposits indirectly inform on the depths and mechanisms of fragmentation, the state of the magma at the fragmentation surface, and the total energy released by explosive fragmentation8, 9. Additionally, TGSD’s are used as a proxy for the initial size distributions of tephra produced by primary fragmentation; a vital source parameter in ash dispersion models10. However, this assumes tephra production derives from a single primary fragmentation mechanism and that particles are not subjected to secondary fragmentation processes11,12,13,14,15. Close examination of TGSD’s for a wide range of eruptions shows that most are not simple unimodal normal distributions (Fig. 1). Rather, the TGSDs are best modelled as bimodal distributions and such bimodality has been previously ascribed to inputs from pyroclastic density currents10, 16 (by secondary fragmentation), magma heterogeneity6, or to contributions from a phreatomagmatic component6. The degree of bimodality varies (Fig. 1). Some eruptions show two, unique, well-defined modes such as the 1997 Soufriere Hills eruption whilst others, like products from the 2007 Etna eruption, are less clearly defined.
Secondary fragmentation is defined as the reduction in particle grain size supervening primary magmatic fragmentation and can involve a wide variety of mechanisms. Here we focus on particle size reduction by attrition17, 18. Attrition can occur by particle-particle disruptive collisions12, 18 where the impact energy is sufficiently high to break particles into a series of daughter fragments18. Attrition also includes abrasion18, which involves surface chipping of irregularities on the exterior surfaces of particles. Secondary fragmentation has, for example, been extensively linked to transport within pyroclastic density currents (PDC’s)16, 19. Within PDC’s secondary ash formation dominantly occurs through abrasion leading to a rounded particle morphology11, 20, 21. Controlled laboratory investigations and numerical models have shown that ash production increases with transport distance but is most effective at vent proximal locations where energy-levels are highest15, 22, 23. Abrasion and milling within PDC’s round pumice clasts21, strip vesicular material from crystals11, 24 and can have increased efficiency in the presence of lithics25. Secondary fragmentation can also operate within the subsurface conduit as the fragmented magma travels from the fragmentation front to the surface11, 12, 14, 26, 27. Dufek et al.12 showed that the break up of particles in the conduit is most successful when particles are >1 cm in diameter and fragmentation is deep. Furthermore, secondary fragmentation modifies the grain size characteristics, componentry and textures of tephra produced by magmatic fragmentation11, 12. However, particle concentrations within the eruption plume have been previously thought to be too low for particle attrition14.
Here, we present a model for fine ash production via secondary fragmentation within volcanic conduits and plumes. We suggest that attrition processes supported by particle-particle interactions constitute a pervasive form of secondary fragmentation that operates in all explosive eruptions. As such, fine ash production by attrition provides a simple explanation for the bimodal TGSD’s that characterize most tephra deposits. The concepts we present here are supported by a new suite of analogue experiments18 that use a standardized apparatus (ASTM 5757-00) to quantify attrition of pumice particles as a function of residence time in a jet (see methods)18. The experiments consist of an attrition tube wherein pumice particles of a known size distribution are entrained and suspended by a 10 L min−1 gas feed for a given time. A wider settling chamber is situated above the attrition tube causing a decrease in gas velocity and, thereby, allowing particles on the order of 10 μm in diameter (depending on local gas velocity and particle density) to settle and re-enter the attrition tube. Smaller ultra-fine particles have low Stokes settling velocities (i.e. less than gas velocity) and continue to rise and be collected in a fines bin. These ultra-fine particles are therefore unable to partake in further particle-particle interactions; however we expect such ultra-fine particles to contribute a negligible amount to attrition since their velocities are extremely low (≪0.0175 ms−1)18. Furthermore, particle segregation28,29,30, aggregation31, 32 and gravitational instabilities33 are known to operate in volcanic plumes providing simple and natural mechanisms for removing fines from, or creating spatial heterogeneities in, the plume.
Our analysis in this study utilizes the data collected from attrition experiments which constrain the rates, mechanisms and efficiency of pumice attrition in jets. These results, combined with quantitative TGSD descriptions from a suite of natural eruptions allow us to formulate an attrition model for volcanic eruptions.
Results
Attrition Experiments
The starting material for each experiment is a feed of pumice particles that has been sieved to a narrow size range (Fig. 2). Specifically, the pumice particles are nominally 250 μm collected between 250 and 500 μm mesh sieves. Each experiment subjects the initial pumice particles to attrition within the fixed gas jet for a controlled amount of time (i.e. a prescribed residence time). At the end of each experiment, the entire run-product is collected and processed for its TGSD (vol. % vs. particle size), which provides the data required to explore the relationship between grain size evolution and particle residence time (Fig. 2a). We note that, although some of the experimental durations are long compared to those experienced during natural transport, the experimental particle concentrations and velocities are several orders of magnitude lower than those observed in natural eruptions – suggesting that the experiments are inefficient relative to nature and provide minimum estimates of attrition rates. This will be further analysed in the discussion.
With increased duration the attrition experiments convert an initially unimodal TGSD of the feed particles into bimodal distributions (trimodal including the original feed). The particle attrition is driven by disruptive collisions34 that fragment parent particles into smaller-sized daughter products and by abrasive chipping of particle surfaces. Thus, the experimental products feature three distinctive grain size populations (Fig. 2a): (1) a feed of original or parent particles (500 to 250 μm) that become reduced in size and abundance by attrition (fragmentation and abrasion); (2) daughter fragments derived by fragmentation of parent particles wherein the daughter fragments increase in abundance and are reduced in median grain size with increased residence time18; and (3) ultra-fine (<4 μm) chips produced by abrasion of irregular particle morphologies. These ultra-fine chips keep a constant median diameter of ~2.5 μm, but increase in abundance with longer jet residence times.
TGSD Models
We describe the TGSD’s using a linear combination of normalized log-normal distributions35 (Gaussian distributions applied to the natural logarithm of particle size, d) representing three modes corresponding to: (1) the feed; (2) the daughter particles and (3) the ultra-fines (see Methods). The three normalized log normal distributions are fitted to the TGSD’s (Fig. 2a) as:
where V n is the volume particle distribution. x i , and σ i are adjustable parameters for the 3 model distributions and represent the median particle size and standard deviation of each distribution, respectively. The third adjustable parameter, p i , is the weighting or proportion of each subpopulation and the sum of p i ’s is required to equal 1. Note that here, and throughout this study, we use particle diameter, d, and fit ln(d) as our independent variable rather than phi [−log2(d)]. Illustrative results for a short term (1 h) and long term (16 h) attrition experiment are presented in Fig. 2b and c respectively.
The attrition experiments provide several critical insights (Fig. 2d). First, the process is efficient, such that only extremely short residence times are required to start producing abundant fines. Even within a low energy jet (10 L min−1), the original feed is reduced by ~50 vol. % within the first 15 minutes of attrition. Within 1 hour the original feed is reduced to ~25 vol.% by conversion to secondary daughter fragments (~62%) and ultra-fines (10%). Second, the decay of the parental mode (feed) and growth of the two secondary peaks are proportional to time. With increased time and attrition, the feed volume diminishes as it creates daughter particles by fragmentation whilst continual abrasion of all particle surfaces entrained into the jet continually produces ultra-fine chips. All experiments were conducted at room temperature. However, we do not expect attrition productivity to be substantially different at magmatic temperatures. Within volcanic conduits and plumes the timescales of collisional interactions between ash particles are short relative to the melt’s relaxation timescale, even at temperatures above glass transition temperatures (i.e. magmatic). The consequence is that the particles behave as brittle solids26.
Surface Area Analysis
Attrition, especially abrasion produced surface chips, can substantially increase the particle surface area exposed to the gas-pyroclast suspension within the conduit and eruption plume. This increase in surface area attending attrition-driven ash production allows for more efficient heat transfer36, by increasing surface area to volume ratio, and thereby cooling of the plume but, more importantly, increases the overall chemical reactivity of the eruption column37,38,39. We have modelled the evolution and increase in total surface area during the attrition experiments. We converted experimental TGSD curves (Fig. 2a) to an equivalent surface area by assuming spherical particles (Fig. 3a). The model values of total surface area (AT) reported in Table 1 are calculated from the area under the surface area-grain size curves (Fig. 3a). They provide a quantitative estimate of surface area increase which we have portrayed as values of AT normalised to the surface area calculated for the original feed (A0; Table 1; Fig. 3b). Surface area production in the attrition experiments is efficient and causes total surface area to increase by two orders of magnitude. Furthermore, surface area generation is fast; the surface area of the initial feed (A0) is increased to 14A0 within 15 min and to 66 times greater than the feed during 16 hours of attrition (Fig. 3b). As milling proceeds the volume of original feed particles decreases whilst the volume of ultra-fines increases (cf. Fig. 2d). This production of ultra-fine particles with a high surface area to volume ratio is responsible for elevating the bulk surface area of the experimental tephra products (Fig. 3c).
Power-law Analysis
Power-law representations (Fig. 4) provide a means to compare results from the attrition experiments. Plotted as particle number density vs. size the three grain size sub-populations (i.e. parent feed, daughter fragments and ultra-fines) define two breaks in slope, strongly suggesting three different mechanisms of grain size reduction40 (Fig. 4a). Daughter and ultra-fine particle subpopulations both exhibit fractal behaviour characterized by unique slopes (D) and intercepts (λ) (Fig. 4b). The daughter particle fragments display a range of D and λ values; with increasing attrition both D and λ increase to maximum values of 5.2 and log (5) respectively. Corresponding values for the ultra-fine sub-population, however, remain near constant with increased attrition (D ~2.4 and λ ~1.7).
Previous experimental work has shown that fractal dimensions can increase by secondary fragmentation during transport in PDC’s or by collisions within the conduit11, 12, 14. Here, we show that increased attrition within a particle loaded gas suspension causes a dramatic increase in both D and λ for the daughter fragment population. Daughter fractal dimensions are increased to values >4 in residence times >2 h. This suggests size modification processes are most effective at early residence times. In contrast, over the same range of residence times, values of D and λ for the ultra-fine population remain near constant (Fig. 4c; ~2.4). We suggest these near-constant D values result from increasing production of surface chips having a uniform size that is independent of residence time. Once formed by abrasive processes, the ultra-fine particles (i.e. surface chips) are removed to the isolated collection box without further size modification and only increase in abundance.
Discussion
Fundamentally, particle attrition is controlled by the frequency or rate of collisions and their magnitudes For any system, natural or experimental, attrition is therefore controlled by a minimum of four governing properties: the particle concentration suspended in the jet; the feed particle size distribution; the particle/gas velocity; and the particle residence time. Attrition is promoted by high particle concentrations, poorly sorted feed distributions, high differential velocities, and long residences times. Our analysis of the grain size data from pumice attrition experiments has shown grain size reduction and ultra-fine production to occur on short timescales. In all experiments, attrition is highly efficient despite the restricted experimental conditions (mass flux input to jet of ~6 × 10−5 kgs−1 and gas velocity of 0.173 ms−1)18 which are substantially less energetic than those found in natural eruptions (mass flux rates of 103–108 kgs−1 and gas velocity of 200–500 ms−1)6, 41 fully supporting attrition within the volcanic conduit.
However, the existence of particle attrition within the eruption plume remains an open research question. During the 1980 Mt. St. Helen’s eruption, plume rise velocities of 28 ms−1 (the initial rising eruption column42) were reported. In contrast, our experiments have a superficial gas velocity of 0.173 ms−1; two orders of magnitude smaller than the natural case. Radar studies43 of the 1980 Mt. St. Helen’s eruption measured the 6-hour mean ash concentrations in the eruption plume to be 3.6–4.9 gm−3, whereas in our experiments bulk ash concentration is calculated as ~4000 gm−3, three orders of magnitude larger than the natural case. Although particle concentrations are much lower in the natural case, the gas velocities are much greater than those in our experiments. However, the particle residence times in our experiments associated with substantial attrition (≤ 2 h) are comparable to particle residence times in the volcanic plume (based on fallout times43). We suggest that the trade-off between higher velocities and lower particle concentrations in volcanic plumes combined with substantial residence times will support ash production by attrition. Clearly, attrition will be maximized in volcanic plumes where particle concentrations are highest and gas velocities are highest (e.g. the vent proximal gas thrust region). On this basis, our experiments and analysis strongly support previous models for “plume and conduit attrition” attending eruptions11, 12, 14, 26, 27, 44 and we suggest that it is a process that operates within all explosive volcanic eruptions. We expect attrition to be most successful within the conduit and decrease in efficiency within the eruption plume as particle concentrations are reduced and vulnerable, highly irregular, particle exteriors are removed.
To compare our experimental insights to natural eruptions we now introduce a metric that facilitates comparison of TGSDs (i.e. between natural deposits or versus experimental data). The time dependent changes in the experimental TGSD’s (Fig. 2) can be fully described by the median particle sizes (x i ) and standard distributions (σ i ) of a series of log normal distributions (Fig. 5a). One way to classify these distributions and quantify how they vary through time is to consider the disorder they contain. To do this we use the Entropy of Information (EoI), which can be approximated on a log-normal size distribution function as:
where f(d) is the normalized mass density function of particles. It is related to the Shannon entropy but has been expanded in this study for probability density functions45. The entropy of information has the SI units of nats (the natural unit of information). EoI serves as a measure of the disorder associated with a random variable; in this case, particle size is the bounded random variable45. Figure 5a shows how we used the information stored in a TGSD for both natural and experimental samples to compute the EoI. When considering input terms (x i , σ i ) independently, better sorting, quantified by smaller standard deviations reduces the EoI; however, this effect is non-linear and is much more pronounced at low σ i values (Fig. 5b). Also, increasing x i acts to increase the EoI. In general, high values of EoI represent particle populations that have large (relative) median diameters and are poorly sorted (Fig. 5b). To a certain extent, more disorder in particle size means a greater potential for more breakage-inducing collisions and thus a higher rate of attrition. Conversely, deposits having low values of EoI represent a more-refined (well sorted) particle population of finer grain size and, thus, less potential for further milling45. On this basis, the EoI can be thought as a metric to quantify the residual milling potential of a particle population.
Here, we firstly describe EoI values calculated from the well-controlled attrition experiments which provides a basis for discussing the EoI of natural volcanic tephra. Within the experiments, the weighted EoI (blue line; Fig. 6a) decreases with time resulting from two factors: (1) the production of daughter particles (~40 µm) by fragmentation and lowering of their median particle size by subsequent, continued abrasion. Specifically, x i of the daughter fragments reduces from 39.91 µm at 15 mins of attrition to 14.16 µm after 24 hours of attrition (Table 2). Furthermore, continued abrasion of these products also reduces the distribution’s variance producing a stable EoI of ~3.6 for this subpopulation (green line; Fig. 6a). (2) Continued abrasion of all particles entrained into the jet creates an ultra-fine subpopulation (EoI ~2; red line; Fig. 6a). We note that the EoI value for the ultra-fine population is independent of attrition time. This is because under ASTM experimental conditions18 2.5 µm is the stable median chip size produced; furthermore σ i remains constant due to hydraulic sorting during transport to the isolated fines collection bin (Table 2). It is the growth in abundance of the ultra-fine population and reduction of the parental feed with increased attrition, that reduces the bulk or weighted EoI of the TGSD to ~4. This is further supported by our surface area analysis; as the relative surface area (AT/A0) of the experimental products increases due to the production of ultra-fines the weighted EoI is observed to decrease systematically (Fig. 6b).
We have applied the Entropy of Information concept to TGSDs recalculated6 for deposits of volcanic tephra derived from a wide range of eruption styles, magma viscosities, plume heights and mass eruption rates. Figure 1 illustrates a selection of these6 and the full dataset is available in Table S1. The modelled EoI for all natural eruptions show high values for the coarse fraction and low values for the finer subpopulation (Fig. 6c). The experimental data demonstrate that the median fragment size (x i ) informs on the generative fragmentation mechanism/energy whereas the population variance (σ) informs on the degree of attrition (mainly abrasion). During a volcanic eruption, primary fragmentation creates a fragment size distribution with high variance (σ) but characterized by a coarse median grain size, x i . This population of particles is analogous to the experimental feed; with high σ values it is capable of undergoing substantial attrition. The initial x i reflects the energy of primary fragmentation, with higher energies creating finer GSDs8, 9 (Fig. 6c). Then, secondary fragmentation of pyroclasts operating above the fragmentation surface creates a sub-population of daughter particles with a lower EoI. From our experimental results we suggest that, with increased transport time and distance, the fractional volume of daughter products contributing to the TGSD increases. By simple mass balance arguments, the increase in daughter products (low EoI) acts to lower the total system entropy. The EoI, therefore, can quantify the degree of attrition represented by individual GSD’s and for a single volcanic system, lower EoI can be taken as evidence of, and resulting from, greater particle attrition during transport.
Primary magmatic fragmentation produces particles that are variably susceptible to secondary fragmentation. The tephra is immediately entrained into a particle-laden high-velocity rising jet comprising an ideal environment for the efficient milling of particles12, 26, 27. The production of fines, by attrition, starts in the subterranean conduit11, 12, 14 and potentially extends to within the volcanic plume. We suggest this environment easily transforms a coarse primary particle size distribution (with low D, high EoI) to one which is heavily enriched in fine ash (high D, low EoI)11, 14. In detail, disruptive collisions12 between parent particles lead to fragmentation, creating a new subpopulation of particles with a finer median grain size. Continued entrainment and transport within the conduit and plume supports continued lower energy collisions12 and abrasion of irregular particle exteriors15. Fine ash production is most successful when primary fragmentation is deep, particle density is high12, 14, and eruption columns are high.
Our model shows that attrition and fine ash generation are inevitable in any explosive volcanic eruption. We show that longer residence times in a particle-laden jet increase fine ash production. Hence, volcanoes with deep fragmentation depths and large mass eruption rates (high plumes46, 47) are particularly susceptible to sustained attrition during transport. We extend and support previous work12 to show that attrition can result in pervasive modification of the entire grain size population produced at the fragmentation surface and therefore biases our view of TGSD’s and the associated deposits. Currently, TGSD’s form our best approximation of the initial grain size distribution at the fragmentation front10, 48, 49, an extremely important eruption source parameter when forecasting atmospheric ash dispersion50, 51. However, current models do not allow for the continuous, transient production of fines during conduit and plume transport. Furthermore, accurate forecasting of ash dispersion is an essential requirement for effective management of airspace during a volcanic eruption52. Failure to accurately forecast ash dispersion has implications for: ash ingestion leading to potential failure of jet engine turbines1, 2, 53; the production of tephra fallout hazard maps, and the spatial extent of atmospheric ash loading resulting in short-term climate change. Secondary fragmentation upon transport should be considered before interpreting TGSDs.
The sustained attrition-driven production of fines within the eruption plume has substantial implications for plume dynamical models54 and other processes that operate within the eruption plume and atmosphere. For instance, the generation of volcanic lightening is known to be most effective when abundant fines are present55. Given that volcanic lightening is rapidly gaining use as a hazard-forecasting tool it is important to truly understand the fine ash contents of plumes. Also, increased loading of fine ash into an eruption plume may lead to regions of slower flow at the vent and a greater chance of PDC formation by column collapse12, 56. Increased concentration of fines within the eruption plume may also enhance ash aggregation31, thereby increasing the effective particle size and resulting in premature fine ash fallout. The reduction of median particle size and increase in surface area can drastically increase the opportunity for HCl and SO2 scavenging and injection into the stratosphere57, 58. Furthermore, the increased surface area to volume ratio of fine ash may enhance the Fe input when deposited in ocean surface waters; an important feedback into the Earth’s biogeochemical cycle59, 60.
Our model has shown that ash generation by attrition processes is an inevitable consequence of many, if not all, explosive volcanic eruptions. Attrition occurs upon rapid timescales even in less energetic, less particle rich conditions to those expected with eruption plumes. We have introduced the Entropy of Information (EoI) as a valuable metric that quantifies the attrition potential or history of a grain size distribution. For a single volcanic system, TGSDs with low EoI are likely to have experienced substantial milling whereas TGSDs with high EoI values correspond to a particle population yet to be attritted. We have shown that abrasion documented by the formation of abundant surface chipping18, 61 drastically increases the ash surface area available for biogeochemical processes. Within plume and conduit, attrition is a highly efficient form of secondary fragmentation transforms our view of TGSDs and must be considered in aspects of dispersion and plume dynamical models for us to truly understand the volcanic fragmentation.
Methods
Sample preparation for Attrition Experiments
The samples used in our attrition experiments were produced by crushing blocks (>10 cm) of pumice. The pumice blocks were collected from proximal to medial pyroclastic fall deposits resulting from the 2360 BP explosive eruption of the Mount Meager volcanic complex: a calc-alkaline stratovolcano complex situated approximately 150 km north of Vancouver, Canada62. The blocks were coarsely crushed and then manually dry sieved using a standard stack of Tyler sieves. The grain size fraction caught in the 250 μm mesh screen was divided into 20 g aliquots and stored in an airtight container ready for the experiments.
Jet attrition experiments
All experiments were performed at ambient room temperature and pressure in a jet attrition rig with dry air fed at 10 L min−1 conforming to the ASTM D5757-00 method63, 64. The experimental apparatus comprises a basal distributor plate with three orifices 0.397 mm in diameter on which the initial sample is loaded. A 710 mm long, 35 mm internal diameter stainless steel attrition tube is connected directly above the distributor. The top of the attrition tube is capped by a wider settling chamber (110 mm in the center) and allows for large particles to settle and return to the attrition tube. The upper cone of the attrition chamber is connected to a fines collection bin. A gas exit pipe with a ceramic filter (~0.1 μm mesh) allows gas to flow unimpeded through the fines collector bin.
For each experiment the distributor plate, gas feed and attrition tube were connected, after which a 20 g sample of 250–500 μm pumice was introduced. Specifically, the sieved pumice sample was poured down the attrition tube to rest on the distributor plate after which the settling chamber and fines collector were connected. Dry compressed air was connected via a calibrated rotameter and increased to a flow rate of 10 L min−1 whilst checking for leaks. We performed experiments for 0.25, 0.5, 0.75, 1, 2, 3, 5, 16 and 24 hours. At the end of each experiment, the gas was switched off and the sample material was left to settle for at least 1 hour after gently knocking the apparatus to loosen adhering fine particles.
Particles from each experiment were collected in three stages. Firstly, the fines collector was removed and the ultra-fine contents were brushed into a storage container. Secondly, the empty fines collector, connecting pipes, and the settling chamber were rinsed at least twice with deionised water over a 63 μm sieve to remove any remaining ultra-fines adhering to the walls of the apparatus. The distributor plate was then removed within a sample collection bag, making sure to brush all of the bolts/washers to recover the entire sample. Lastly, the attrition tube was flushed again with deionised water over a 63 μm sieve.
Post-attrition sample characterisation
All of the recovered sample was added to deionised water and measured using a Malvern Mastersizer 2000 with the hydro 2000 Mu water dispersion module attached (capable of measuring particles 0.02 μm to 2000 μm in size.) Using a pump speed of 1900 rpm an aliquot of the attrition sample was added to the dispersion module and measured three times. An ultrasonic pulse was applied to the sample for 2 s before the measurement to prevent particles from aggregating in the water suspension. For each experimental product three separate aliquots were taken, each measured three times; therefore the results presented represent averages of nine measurements.
Calculation of EoI Values from Model Grain Size Distributions
The Entropy of Information (EoI) is a measure of disorder associated with a random variable. The EoI concept can be applied to grain size distributions found in natural pyroclastic deposits if particle size is taken as the bounded random variable. As discussed in the main text, values of EoI can be approximated from the log-normal size distribution functions used to describe the grain size variations within individual deposits or total grain size distributions estimated for individual volcanic eruptions. Specifically, EoI values are computed from the median particle size (x i ) and standard distribution (σ i ) of log normal distributions fitted to the grain size data:
Higher values of EoI (more disorder) coincide with larger medians and higher variances of particle sizes reflecting a greater potential for particle size reduction and, thus, higher rates of attrition.
Jones et al. (2017)18 presented a series of analogue experiments wherein they used an air jet to mill pumice tephra under fixed conditions for variable amounts of time. Total grain size distributions are published for the run products from each experiment allowing us to compute their respective EoI values following the methods advanced by Xiao et al. (2014)45.
The initial material (i.e. feed) is modelled as a unimodal grain size distribution having a median of 375 μm and 3 standard deviations equal to 250 μm (see Fig. 2a). The EoI for the feed is 5.88. Subsequently, the total grain size distributions (vol. % vs. size) from each experiment were fitted to a normalized log-normal distribution comprising up to three separate distributions defined by modes in the datasets expressed as vol. % vs. ln diameter (Fig. 2c and d). We assume that the modes define the median particle size (x i ) for each distribution, that each log normal distribution is symmetric about the mode, and that the proportions (p i ) of each of the distributions sum to 1. For a model comprising 3 normal distributions, the adjustable parameters are the values of σ i and p i (i = 1:3). The model values of x i and σ i allow us to compute EoI values for each distribution representing the modification of the original feed, the production of daughter particles and the production of ultra-fines (Fig. 6); the model values of p i allow for a weighted value of EoI representing the total grain size distribution (Fig. 6a).
We also applied the EoI concept to TGSD’s from natural pyroclastic deposits previously compiled by Costa et al. (2016)6. Costa et al. (2016)6 modelled the TGSD’s as the sums of 2 log-normal distributions (i.e. Gaussian in the parameter phi (ϕ) = −log2 d). We used their model values of mean, standard deviation and proportion for the 2 distributions to recalculate the distributions in natural logarithm space. We then refit the TGSD’s to a bimodal normalized log-normal distribution (based on the natural logarithms of particle size) to obtain corresponding values of x i , σ I , and p i . These model values were used to compute EoI values for the natural data that then could be compared to the experimental data (Fig. 6).
Data Availability
The datasets generated during and/or analysed during the current study are available from the corresponding author upon request.
References
Song, W. et al. Volcanic ash melting under conditions relevant to ash turbine interactions. Nat. Commun. 7 (2016).
Kueppers, U. et al. The thermal stability of Eyjafjallajökull ash versus turbine ingestion test sands. J. Appl. Volcanol 3, 4 (2014).
Horwell, C. J. & Baxter, P. J. The respiratory health hazards of volcanic ash: a review for volcanic risk mitigation. Bull. Volcanol. 69, 1–24 (2006).
Wilson, T. M., Jenkins, S. F. & Stewart, C. Volcanic ash fall impacts. Glob. Volcan. Hazards Risk 0–281 (2015).
Baldini, J. U. L., Brown, R. J. & McElwaine, J. N. Was millennial scale climate change during the Last Glacial triggered by explosive volcanism? Sci. Rep. 5 (2015).
Costa, A., Pioli, L. & Bonadonna, C. Assessing tephra total grain-size distribution: Insights from field data analysis. Earth Planet. Sci. Lett. 443, 90–107 (2016).
Cashman, K. V, Sturtevant, B., Papale, P. & Navon, O. Magmatic fragmentation. Encycl. volcanoes 421–430 (2000).
Perugini, D. & Kueppers, U. Fractal analysis of experimentally generated pyroclasts: a tool for volcanic hazard assessment. Acta Geophys 60, 682–698 (2012).
Kueppers, U., Perugini, D. & Dingwell, D. B. ‘Explosive energy’ during volcanic eruptions from fractal analysis of pyroclasts. Earth Planet. Sci. Lett. 248, 800–807 (2006).
Eychenne, J., Cashman, K., Rust, A. & Durant, A. Impact of the lateral blast on the spatial pattern and grain size characteristics of the 18 May 1980 Mount St. Helens fallout deposit. J. Geophys. Res. Solid Earth 120, 6018–6038 (2015).
Jones, T. J. et al. Primary and secondary fragmentation of crystal bearing intermediate magma. J. Volcanol. Geotherm. Res. 327, 70–83 (2016).
Dufek, J., Manga, M. & Patel, A. Granular disruption during explosive volcanic eruptions. Nat. Geosci. 5, 561–564 (2012).
Walker, G. P. L. Generation and dispersal of fine ash and dust by volcanic eruptions. J. Volcanol. Geotherm. Res. 11, 81–92 (1981).
Kaminski, E. & Jaupart, C. The size distribution of pyroclasts and the fragmentation sequence in explosive volcanic eruptions. J. Geophys. Res. Solid Earth 103, 29759–29779 (1998).
Dufek, J. & Manga, M. In situ production of ash in pyroclastic flows. J. Geophys. Res. Solid Earth 113, 2156–2202 (2008).
Engwell, S. & Eychenne, J. Chapter 4. Contribution of Fine Ash to the Atmosphere From Plumes Associated with Pyroclastic Density Currents. doi:10.1016/B978-0-08-100405-0.00007-0 (Elsevier, 2016).
Bemrose, C. R. & Bridgwater, J. A review of attrition and attrition test methods. Powder Technol. 49, 97–126 (1987).
Jones, T. J., Russell, J. K., Lim, C. J., Ellis, N. & Grace, J. R. Pumice attrition in an air-jet. Powder Technol. 308, 298–305 (2017).
Eychenne, J., Le Pennec, J.-L., Troncoso, L., Gouhier, M. & Nedelec, J.-M. Causes and consequences of bimodal grain-size distribution of tephra fall deposited during the August 2006 Tungurahua eruption (Ecuador). Bull. Volcanol. 74, 187–205 (2012).
Freundt, A. & Schmincke, H.-U. Abrasion in pyroclastic flows. Geol. Rundschau 81, 383–389 (1992).
Manga, M., Patel, A. & Dufek, J. Rounding of pumice clasts during transport: field measurements and laboratory studies. Bull. Volcanol. 73, 321–333 (2011).
Kueppers, U., Putz, C., Spieler, O. & Dingwell, D. B. Abrasion in pyroclastic density currents: insights from tumbling experiments. Phys. Chem. Earth, Parts A/B/C 45, 33–39 (2012).
Cagnoli, B. & Manga, M. Granular mass flows and Coulomb’s friction in shear cell experiments: Implications for geophysical flows. J. Geophys. Res. Earth Surf 109, 2156–2202 (2004).
Meyer, J. D. Glass crust on intratelluric phenocrysts in volcanic ash as a measure of eruptive violence. Bull. Volcanol. 35, 358–368 (1971).
Bernard, J. & Le Pennec, J.-L. The milling factory: Componentry-dependent fragmentation and fines production in pyroclastic flows. Geology 44, 907–910 (2016).
Campbell, M. E., Russell, J. K. & Porritt, L. A. Thermomechanical milling of accessory lithics in volcanic conduits. Earth Planet. Sci. Lett. 377, 276–286 (2013).
del Gaudio, P. & Ventura, G. Mechanical erosion of xenoliths by magmatic shear flow. Geophys. Res. Lett. 35, 1–5 (2008).
Mannen, K. Particle segregation of an eruption plume as revealed by a comprehensive analysis of tephra dispersal: Theory and application. J. Volcanol. Geotherm. Res. 284, 61–78 (2014).
Sable, J. E., Houghton, B. F., Wilson, C. J. N. & Carey, R. J. Complex proximal sedimentation from Plinian plumes: the example of Tarawera 1886. Bull. Volcanol. 69, 89 (2006).
Bursik, M. I., Sparks, R. S. J., Gilbert, J. S. & Carey, S. N. Sedimentation of tephra by volcanic plumes: I. Theory and its comparison with a study of the Fogo A plinian deposit, Sao Miguel (Azores). Bull. Volcanol. 54, 329–344 (1992).
Textor, C. et al. Volcanic particle aggregation in explosive eruption columns. Part II: Numerical experiments. J. Volcanol. Geotherm. Res. 150, 378–394 (2006).
Brown, R. J., Bonadonna, C. & Durant, A. J. A review of volcanic ash aggregation. Phys. Chem. Earth, Parts A/B/C 45, 65–78 (2012).
Manzella, I., Bonadonna, C., Phillips, J. C. & Monnard, H. The role of gravitational instabilities in deposition of volcanic ash. Geology 43, 211–214 (2015).
Gravina, T., Lirer, L., Marzocchella, A., Petrosino, P. & Salatino, P. Fluidization and attrition of pyroclastic granular solids. J. Volcanol. Geotherm. Res. 138, 27–42 (2004).
Brown, W. K. & Wohletz, K. H. Derivation of the Weibull distribution based on physical principles and its connection to the Rosin–Rammler and lognormal distributions. J. Appl. Phys. 78, 2758–2763 (1995).
Stroberg, T. W., Manga, M. & Dufek, J. Heat transfer coefficients of natural volcanic clasts. J. Volcanol. Geotherm. Res. 194, 214–219 (2010).
Delmelle, P., Villiéras, F. & Pelletier, M. Surface area, porosity and water adsorption properties of fine volcanic ash particles. Bull. Volcanol. 67, 160–169 (2005).
Gregg, S. J. & Sing, K. S. W. Adsorption, surface area and porosity academic. New York 114, 242–245 (1982).
Rose, W. I., Bonis, S., Stoiber, R. E., Keller, M. & Bickford, T. Studies of volcanic ash from two recent Central American eruptions. Bull. Volcanol. 37, 338–364 (1973).
Grady, D. E. Length scales and size distributions in dynamic fragmentation. Int. J. Fract 163, 85–99 (2010).
Wilson, L. Explosive volcanic eruptions III. Plinian eruption columns. Geophys. J. Int. 45, 543–556 (1976).
Harris, D. M. et al. Radar observations of ash eruptions. US Geol. Surv. Prof. Pap. 1250, 323–333 (1981).
Harris, D. M. & Rose, W. I. Estimating particle sizes, concentrations, and total mass of ash in volcanic clouds using weather radar. J. Geophys. Res. Ocean 88, 10969–10983 (1983).
Mueller, S. B., Lane, S. J. & Kueppers, U. Lab-scale ash production by abrasion and collision experiments of porous volcanic samples. J. Volcanol. Geotherm. Res. 302, 163–172 (2015).
Xiao, G., Grace, J. R. & Lim, C. J. Evolution of Limestone Particle Size Distribution in an Air-Jet Attrition Apparatus. Ind. Eng. Chem. Res. 53, 15845–15851 (2014).
Settle, M. Volcanic eruption clouds and the thermal power output of explosive eruptions. J. Volcanol. Geotherm. Res. 3, 309–324 (1978).
Wilson, L., Sparks, R. S. J. & Walker, G. P. L. Explosive volcanic eruptions IV. The control of magma properties and conduit geometry on eruption column behaviour. Geophys. J. Int. 63, 117–148 (1980).
Bonadonna, C. & Houghton, B. F. Total grain-size distribution and volume of tephra-fall deposits. Bull. Volcanol. 67, 441–456 (2005).
Bonadonna, C., Cioni, R., Pistolesi, M., Elissondo, M. & Baumann, V. Sedimentation of long-lasting wind-affected volcanic plumes: the example of the 2011 rhyolitic Cordón Caulle eruption, Chile. Bull. Volcanol. 77, 1–19 (2015).
Mastin, L. G. et al. A multidisciplinary effort to assign realistic source parameters to models of volcanic ash-cloud transport and dispersion during eruptions. J. Volcanol. Geotherm. Res. 186, 10–21 (2009).
Stohl, A. et al. Determination of time-and height-resolved volcanic ash emissions and their use for quantitative ash dispersion modeling: the 2010 Eyjafjallajökull eruption. Atmos. Chem. Phys. 11, 4333–4351 (2011).
Beckett, F. M. et al. The sensitivity of NAME forecasts of the transport of volcanic ash clouds to the physical characteristics assigned to the particles. UK Met Off. Forecast. Res. Tech. Rep 592, 1–39 (2014).
Song, W. et al. Fusion characteristics of volcanic ash relevant to aviation hazards. Geophys. Res. Lett. 41, 2326–2333 (2014).
Costa, A., Suzuki, Y., Folch, A. & Cioni, R. Numerical models of volcanic eruption plumes: inter-comparison and sensitivity. J. Volcanol. Geotherm. Res. 326, 1–1 (2016).
Cimarelli, C., Alatorre-Ibargüengoitia, M. A., Kueppers, U., Scheu, B. & Dingwell, D. B. Experimental generation of volcanic lightning. Geology 42, 79–82 (2014).
Papale, P. Dynamics of magma flow in volcanic conduits with variable fragmentation efficiency and nonequilibrium pumice degassing. J. Geophys. Res. Solid Earth 106, 11043–11065 (2001).
Ayris, P. M. et al. HCl uptake by volcanic ash in the high temperature eruption plume: Mechanistic insights. Geochim. Cosmochim. Acta 144, 188–201 (2014).
Ayris, P. M. et al. SO2 sequestration in large volcanic eruptions: High-temperature scavenging by tephra. Geochim. Cosmochim. Acta 110, 58–69 (2013).
Ayris, P. & Delmelle, P. Volcanic and atmospheric controls on ash iron solubility: A review. Phys. Chem. Earth, Parts A/B/C 45, 103–112 (2012).
Maters, E. C., Delmelle, P. & Gunnlaugsson, H. P. Controls on iron mobilisation from volcanic ash at low pH: Insights from dissolution experiments and Mössbauer spectroscopy. Chem. Geol, doi:10.1016/j.chemgeo.2016.11.036 (2016).
Jones, T. J., Russell, J. K., Porritt, L. A. & Brown, R. J. Morphology and surface features of olivine in kimberlite: implications for ascent processes. Solid Earth 5, 313 (2014).
Hickson, C. J., Russell, J. K. & Stasiuk, M. V. Volcanology of the 2350 BP eruption of Mount Meager volcanic complex, British Columbia, Canada: implications for hazards from eruptions in topographically complex terrain. Bull. Volcanol. 60, 489–507 (1999).
Chen, Z., Lim, C. J. & Grace, J. R. Study of limestone particle impact attrition. Chem. Eng. Sci. 62, 867–877 (2007).
Knight, A., Ellis, N., Grace, J. R. & Lim, C. J. CO 2 sorbent attrition testing for fluidized bed systems. Powder Technol. 266, 412–423 (2014).
Acknowledgements
TJJ was funded by NERC NE/L0025901. JKR is supported by the Natural Sciences and Engineering Research Council of Canada through the Discovery Grants and Discovery Accelerator Supplements programs. We thank CJ Lim, John Grace, Naoko Ellis, Mila Huebsch and Camilo Romero for their assistance with the laboratory experiments.
Author information
Authors and Affiliations
Contributions
T.J.J. and J.K.R. conceptualised the project together and contributed equally to the manuscript; T.J.J. designed and performed the experiments and conducted the fractal analysis whilst J.K.R. modelled the TGSD from the published datasets.
Corresponding author
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Jones, T.J., Russell, J.K. Ash production by attrition in volcanic conduits and plumes. Sci Rep 7, 5538 (2017). https://doi.org/10.1038/s41598-017-05450-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-017-05450-6
- Springer Nature Limited
This article is cited by
-
Identifying rheological regimes within pyroclastic density currents
Nature Communications (2024)
-
Melt stripping and agglutination of pyroclasts during the explosive eruption of low viscosity magmas
Nature Communications (2022)
-
In-conduit capture of sub-micron volcanic ash particles via turbophoresis and sintering
Nature Communications (2022)
-
The lifecycle of volcanic ash: advances and ongoing challenges
Bulletin of Volcanology (2022)
-
The pivotal role of Vulcanian activity in ending the explosive phase of rhyolitic eruptions: the case of the Big Obsidian Flow eruption (Newberry Volcano, USA)
Bulletin of Volcanology (2022)