Abstract
The connectivity of rocks’ porous structure and the presence of fractures influence the transfer of fluids in the Earth’s crust. Here, we employed laboratory experiments to measure the influence of macro-fractures and effective pressure on the permeability of volcanic rocks with a wide range of initial porosities (1–41 vol. %) comprised of both vesicles and micro-cracks. We used a hand-held permeameter and hydrostatic cell to measure the permeability of intact rock cores at effective pressures up to 30 MPa; we then induced a macro-fracture to each sample using Brazilian tensile tests and measured the permeability of these macro-fractured rocks again. We show that intact rock permeability increases non-linearly with increasing porosity and decreases with increasing effective pressure due to compactional closure of micro-fractures. Imparting a macro-fracture both increases the permeability of rocks and their sensitivity to effective pressure. The magnitude of permeability increase induced by the macro-fracture is more significant for dense rocks. We finally provide a general equation to estimate the permeability of intact and fractured rocks, forming a basis to constrain fluid flow in volcanic and geothermal systems.
Similar content being viewed by others
Introduction
The storage and transport of fluids in the Earth’s crust is of primary importance for our understanding of georesources and geohazards. In volcanic settings, fluids both circulate in hydrothermal reservoirs1 commonly exploited for geothermal energy, and drive magma ascent and volcanic eruptions2,3,4. Better constraints of how fluids are transported in these systems will help define more accurate models, which in turn could lead to enhanced geothermal exploitation as well as improved prediction of volcanic eruptions.
All materials are inherently permeable, as permeability expresses either the diffusion speed at a molecular level or the capacity of a porous structure, at macroscopic level, to carry fluid flow. The permeability of rocks has been central to an extensive body of geoscientific studies since the early efforts of Darcy5, 6 and is often described in terms of its relationship to porosity7,8,9,10. In pursuit of a simple model constraining laminar flow in conduits, the Kozeny-Carman11,12,13,14 relationship, or modifications therof, can commonly be employed to explain that permeability increases non-linearly as a function of porosity for a wide range of rocks15,16,17,18,19,20,21,22. This equation describes the evolution of the permeability-porosity relationship by applying a coefficient dependent on the dominant conduit geometry controlling the fluid flow, namely tubular (connected pores) or planar (cracks) conduits23, 24. Previous experimental studies have invoked the existence of a percolation threshold for explosive volcanic products around 30% porosity18, 19, 25, below which rocks are considered impervious, while the percolation threshold for porous media has been mathematically modelled to 59.27% in 2D26 and to 31.16% porosity in 3D27 (with circular, and spherical pores, respectively). However, other efforts have demonstrated that fluid flow is promoted at lower porosities by fractures19, 28,29,30,31,32,33, and hence it may not be appropriate to incorporate a percolation threshold when describing the relationship of porosity and permeability. Rather, it may be necessary to use several Kozeny coefficients16 due to the presence of vesicles (bubbles) and fractures15, 18, 22, 34, and their evolution through multiple processes [including: vesiculation35, shearing30, 36, 37, fracturing4, 38, 39, cooling40] that force pore coalescence. To describe this complexity Farquharson et al.17 proposed that the power law describing the permeability-porosity relationship can be decomposed into two regimes; a dense regime (<14 vol. % pores) for which the permeability is controlled by the connectivity of micro-fractures in the rock and a porous regime (>14 vol. % pores) for which vesicles control fluid flow. Such change points have been noted in other lithologies41, and yet these resolutions still fail to capture the fluid flow in natural volcanic environments (and associated hydrothermal/geothermal systems), which is channelled through structurally complex pathways, containing highly variable, heterogeneous, and anisotropic porous networks, overprinted by complex fracture networks that enhance connectivity across all scales42,43,44,45. The effect of fractures on the overall permeability of a rock depends on the fracture’s characteristics46 (e.g., size, roughness), the fracture system’s geometry1, 47 (i.e., direction of the fault with respect to the fluid flow), whether the fracture system is dilatant versus compactional48,49,50, and whether the fracture has in-filled fragmental material32, 51, 52. The presence of fractures can induce permeability anisotropy by opening localised pathways for fluid flow1, 28, 46,47,48, 53, for example, as observed along the shear margins of ascending magma29. Even prior to macroscopic failure, the nucleation, propagation and coalescence of micro-fractures as material is loaded (and strained) increases the permeability, and permeability anisotropy of rocks54, 55. The development of permeability anisotropy through damage accumulation56,57,58 can alter intrinsic properties of geothermal, hydrothermal and magmatic reservoirs, including the mode of heat transfer/fluid flow59. To understand the impact of macro-fractures, Lucia60, modelled the permeability of a system made of impermeable cubic samples separated by fractures with variable widths and determined that fracture spacing has a significant impact on the permeability of the system. In light of the importance of fractures on the development of permeable fluid flow, we hereby present the results of a series of experiments tackling the effect of fractures on permeability in rocks with variable initial porous structures (and starting permeabilities) and model the extensive dataset by adapting this cubic method60 to account for fluid flow through fractured rocks.
Material and Methods
In order to assess the influence of fractures on permeability of rocks with a range of initial permeable porous networks (consisting of micro-fractures and vesicles), we selected a variety of extrusive volcanic rocks from six volcanoes (Ceboruco, Mexico; Volcán de Colima, Mexico; Krafla, Iceland; Mount St. Helens, USA; Pacaya, Guatemala; Santiaguito, Guatemala), and tested their permeability, both intact and fractured, as a function of effective pressure (calculated as the difference between the confining pressure and the average pore pressure).
70 cylindrical rock discs, 26 mm diameter and 13 mm thick were cored and prepared from the samples collected. The porosity of each disc was then calculated using quantification of the samples’ volume (based on their dimensions) and determination of the samples skeletal volume using an AccuPyc 1340 helium pycnometer from Micromeritics with a 35 cm3 cell (providing sample volumes with an accuracy of ±0.1%). Permeability of the variously porous (1.2–41.7 vol. %) samples was then measured under ambient pressure, using a handheld TinyPerm II mini-permeameter61, 62 from New England Research Inc., which utilises the pulse decay method by imposing air flow (746.13 ml) through an aperture of 8 mm (in contact with the sample). This method provides rock permeability determination with an accuracy >0.2 log units of permeability at low porosities, to 0.5–1 log units at higher porosities (verified by our dataset which includes 6–10 repeats of each measurement, see Supplementary Information). Then, for a subset of 7 samples (with porosities spanning 1.2 to 30.0 vol. %), the permeability was measured as a function of confining pressure (5–30 MPa, at 5 MPa increments) using the steady-state flow method in a hydrostatic pressure cell developed by Sanchez Technologies. Here, confining pressure was applied by silicon oil, and water flow was induced by applying a pore pressure differential (∆P) of 0.5 MPa (inflow of 1.5 MPa and an outflow of 1 MPa) across the sample (i.e., at an average pore pressure of 1.25 Mpa), and the flow rate (Q) was measured and used to compute the permeability (k) using Darcy’s law:
where μ is the water viscosity, L is the sample thickness and A is the sample cross-sectional area5, 6. A further six unconfined measurements were made in the hydrostatic cell for direct comparison with the ambient pressure measurements of the TinyPerm (see Supplementary Figure 2). In these measurements, a ∆P of 0.015 MPa (inflow 0.17 MPa and outflow at atmospheric pressure of 0.155) was used, and the samples were double-jacketed to prevent fluid loss (as the inflow exceeded the confining pressure). All specimens (70 measured at ambient pressure and 7 measured under confined conditions) were then axially and perpendicularly wrapped in electrical tape before being fractured using the Brazilian tensile testing method63 at a displacement rate of 0.25 µm/s in an Instron 5969 uniaxial press. This technique generally induces one well-defined axial, tensile fracture through a diametrically-compressed cylinder64. [Note that the tape was used to prevent dislocation or shearing of the two main fragments generated by tensile testing and only samples with well-defined macro-fractures were employed in permeability analysis]. Following this, the permeability of all 70 fractured samples was measured with the TinyPerm and for the aforementioned 7 samples (initially selected for permeability measurements in the hydrostatic cell) the permeability was again measured as a function of confining pressure in the hydrostatic cell.
The relative permeability change induced by the presence of a fracture was further modelled using the theoretical formulation developed for a fractured body by Lucia60 and modified herein for the effect of a variably permeable host material. Finally, thin sections of the rocks were prepared using a fluorescent dyed epoxy for microstructural analysis using a UV light source in reflected mode in a DM2500P Leica microscope.
Results
Permeability at ambient pressure
We observe that permeability varies as a function of porosity, increasing by approximately four orders of magnitude (at ambient pressure) for intact samples across the range of porosities tested (1.2–41.7%; Fig. 1). This non-linear relationship between permeability (κ) and porosity (Φ), can be described by:
which constrains the dataset with a coefficient of determination (R2) of 0.75. This relationship agrees well with that described in previous studies18, 19, and suggests that it is not necessary to fit this dataset with two regressions.
Using Brazilian tensile tests, we imparted a macro-fracture which resulted in a net increase in permeability for all porosities tested (Fig. 1). Across the range measured, the variability in permeability as a function of porosity (four orders of magnitude prior to fracturing) decreased to less than 2 after imparting a macro-fracture (Fig. 1). The permeability of the fracture-bearing rocks (κ fr ) as a function of initial porosity is described by:
Ultimately, the presence of a fracture modifies the relationship between permeability and porosity, with the permeability of fractured porous samples falling across a much narrower range than the permeability of the intact samples (i.e. much less sensitive to the initial rock porosity; Fig. 1). In detail, we note a relative increase in permeability of up to four orders of magnitude by imparting a fracture, as noted in previous work33, 63. This increase is most pronounced for samples with low initial porosity (≤11 vol. %). Contrastingly, the permeability of the more porous rocks (≥18 vol. %) increases only slightly due to the presence of a macro-fracture, while intermediate porosity samples (11–18%) show variable behaviour.
Permeability at variable effective pressures
For the subset of samples measured in the hydrostatic cell, the permeability of intact and fractured rocks decreases non-linearly with increasing effective pressure (Fig. 2; see also Supplementary Fig. 1). When plotting the data from the hydrostatic cell in porosity-permeability space, we observe similar trends to that measured at atmospheric pressure (Figs 1, 3a, Supplementary Fig. 3). We demonstrate a generally good agreement between measurements made using the handheld TinyPerm device and the hydrostatic cell by conducting a targeted set of measurements at ambient pressure in the hydrostatic cell (see Supplementary Fig. 2).
The influence of a macro-fracture on the permeability of the rocks tested here is similar at higher effective pressures as it is at atmospheric pressure, with the permeability increase that results from fracturing being more significant in the initially denser rocks (Fig. 3a). We further see that the influence of effective pressure on permeability is most pronounced in the densest rocks (≤11% porosity), while more porous rocks (≥18%) are less susceptible to changes in pressure (Figs 2, 3a); this supports previous studies, which examined the influence of pore closure under confining pressure on a range of rock types, suggesting the process is dominated by the closure of micro-fractures4, 65,66,67,68,69,70.
Microstructures in intact samples
Microstructural analysis was conducted on thin sections impregnated with fluorescent green-dyed epoxy (highlighting the porous network of the rocks) to assess the reasons for the relative impact of a fracture on volcanic rocks at low and high porosities (Fig. 4). The rocks tested here were chosen for their chemical and mineralogical distinctions so as to widen the applicability of the findings of the influence of the porous network on permeability accross a range of volcanic rocks and environments. The porous networks of the densest rocks (Fig. 4a,b) are dominated by an intricately connected network of micro-fractures, linking the vesicles present in the rock71. Close examination of the photomicrographs show no overall preferential alignment (i.e., anisotropy) of the microfractures, but do highlight preferred fracture developments along planes of weakness in phenocrysts. In contrast, the porous networks of the more porous rocks (Fig. 4c,d) appear dominated by the connectivity of vesicles of different sizes and shapes. These porous rocks exhibit few microfractures, and those which are present are primarily developed in phenocrysts (Fig. 4c,d). Such a contrasting architecture of the porous networks in dense and porous volcanic rocks has been observed in other studies24, 33, 72 and may be at the origin of the non-linearity in permeability-porosity relationships discussed in previous studies17, 24, 72 and in the relative effect of a fracture on the permeability of rocks as observed here. As such, we seek to test the applicability of fracture permeability modelling to describe the permeability relationships constrained in our experiments.
Fractured rock permeability analysis
The permeability of fractures as a function of width can be modelled using the early work of Lucia60, in which the geometrical proportion of a fracture set arrangement is applied to a cubic body. The relationship is based on the principal of a pressure differential (∆P) across a fracture with given length (L) and width (w), according to:
where μ and v are the viscosity and velocity of the fluid flowing through the fracture, respectively. Lucia60 later modified the equation to obtain a system permeability (κ s ) formulation, which includes the area of the fracture as well as the surrounding rock:
where A f and A s are the cross sectional areas of the fracture and the sample, respectively. Considering the host rock permeability (κ Φ ), our cylindrical sample geometry and the near rectangular fracture geometry (produced in this study through Brazilian tests), Equation 5 can be further modified to:
in which κ Φ is the permeability of intact samples (each at a given porosity) and r is the aperture radius of the permeameter (i.e., 4 mm for the TinyPerm and 13 mm for the hydrostatic cell).
Using this relationship, we model the macro-fracture width (i.e., the coloured curves in Fig. 1) for rocks with different initial porosities and permeabilities. The permeability measurements on fractured samples coincide with the modelled permeability for rocks hosting a fracture of some 0.06–0.07 mm wide. We apply this analysis to the permeability obtained at each effective pressure (Fig. 3a, Supplementary Fig. 3), to constrain the evolution of fracture width as a function of effective pressure. The boxplot (Fig. 3b) shows the modelled fracture widths for our range of porosities with increasing pressure. All boxes have been defined by finding the closest modelled fracture width to each permeability measurement at each effective pressure (see Fig. 1 and Supplementary Fig. 3). The analysis suggests that the fracture closes non-linearly with effective pressure73, corresponding to the measured non-linear decrease in permeability, with most of the fracture closure occurring within the first 5 MPa of confinement for all samples, irrespective of initial porosity (Fig. 3b).
In light of this constraint, and given the knowledge of the bulk fracture density (volume of macro-fracture/volume of host rock), we rewrite the above permeability equations to provide a general formulation for the permeability of a fractured system (κ s) as a function of the permeability of the intact system (κΦ), bulk fracture density (ρ f ), average fracture length (\(\bar{l}\)) and width (\(\bar{w}\)) over an area of interest (A i ):
In this formulation, the left-hand term expresses the permeability evolution of the system as a function of effective pressure and porosity, whilst the right-hand term constrains the impact of fractures on the overall permeability of the system.
We can further expand this formulation to include the empirical description of the effect of effective pressure on the permeability of the intact rock (Eq. 8) as well as on the fracture width (Eq. 9; see equations S2–7 in Supplementary Information)
And
where \({P}_{eff}\) is the effective pressure in Pascals and each coefficient has different pressure dependent unit described in Supplementary Information. Thus we can rewrite Equation 7 to:
providing us with an empirical description of rock permeability as a function of effective pressure, porosity, fracture density and geometry to be tested in various applications.
Discussion
Understanding the permeability of volcanic rocks, and especially fractured volcanic rocks, is crucial to our models of fluid flow in shallow volcanic and hydrothermal systems2, 74. Here, a combination of extensive permeability testing and fluid flow modelling is used to demonstrate the ability to simulate the permeability of intact and fractured rocks and of fracture closure with confinement. In our fitting of the permeability-porosity relationship, we employed a single power law (as demonstrated by previous studies15, 18, 19, 22, 34) as the regression is sufficient to fit the non-linear dataset accurately, without the need to invoke a change point. From microstructural examination (Fig. 4), we find that the connectivity of the porous network evolves due to the interplay of micro-cracks and few vesicles at low porosity, to enhanced pore interconnection at 11–18% porosity (an observation which may share similarities with previously invoked change points17) and finally more complete coalescence at porosities ≥18%. We emphasise that the porosity-permeability relationship of volcanic rocks results from a succession of processes undergone by the magma and the rock (i.e., vesiculation and pore collapse, fragmentation, sintering, shearing, cooling, contraction, etc) and as a result the porosity-permeability relationship does not describe a single generation mechanism, but rather reflects a combination of the above, which may have differing importance at different porosities. As permeability measurements accrue and widen the scatter at all porosities, evidence suggests that a simple power law, with acknowledgement of the scatter, remains an effective means to estimate the permeability of volcanic systems with wide ranging porous structures.
Across the range of porosities tested, the presence of a macro-fracture increases the permeability of volcanic rocks, although to different degrees, depending on the porosity of the rock. The impact of fractures on the resultant system permeability is greatest for low porosity rocks, where permeability can increase by up to four orders of magnitude, which can be ascribed to a decrease in the tortuosity of the dominant fluid pathway by addition of a macro-fracture63. This increase in permeability as a result of fracturing has previously been noted33, 52, 75. Here, we show that the initial porosity of the samples has little influence on the resultant system permeability once a fracture is introduced. Matthäi and Belayneh76 classified the influence of a fracture on a rock permeability as either 1) fracture carries all the fluid flow; 2) fracture carries as much fluid flow as the host rock; or 3) fracture has a negligible impact on the permeability. Based on the findings presented here, we relate this classification to the relative magnitudes of permeability changes imparted by a fracture on rocks with different porosities: Regime 1 relates to dense rocks with ≤11% porosity; regime 2 to rocks with ~11–18% pores and regime 3 to the most porous rocks (≥18%), in which the presence of a macro-fracture imparts little change on the permeability of the system (Fig. 3). Interestingly, we find that the porosity thresholds for regime changes remain unaffected by changes in effective pressure, although the magnitude of permeability increase by inducing a fracture (i.e. the fracture width) is itself pressure dependent.
We provide an experimentally based, permeability model to describe the permeability of macro-fractured volcanic rocks with a range of existing permeable porous structures, which, using appropriate upscaling techniques33, 77, 78, may be adapted to a range of geological systems60. Utilisation of the simple formulation provided may help constrain or reassess a variety of processes for which an understanding of fluid flow pathways developed via multiple processes is crucial. For example, the percolation threshold of explosive volcanic products18, 19, 25 may be modified significantly by fracturing. Previous works have demonstrated that outgassing in volcanic materials occurs through a network of fractures that localise and enhance fluid flow19, 28,29,30,31,32,33, and gas monitoring at active volcanoes supports heterogeneous degassing models controlled by fractures in often low-permeability host rocks74. Further, at the volcano-hydrothermal system of Soufrière Hills volcano (Montserrat), Edmonds et al.74 surmise that cyclicity/fluctuations in gas emissions result from fractures undergoing episodic closure or sealing, leading to permeability changes in regions with high permeability anisotropy near conduit margins28, 29, 79. Our findings concur with these outgassing observations, as pore pressure (hence effective pressure) regulates the permeability of intact and fractured rocks. In this scenario, efficient outgassing may promote the lowering of pore pressure (i.e., effective pressure increase), fostering the ability for fractures to shut and subsequently heal80. It must be noted that this sealing will be dependent upon any fracture infill, which may either form a rigid network serving to maintain the permeable pathway, or may be subject to compaction or sintering, influencing the evolution of permeability32, 52. Sealing may inhibit further fluid flow and promote creation of momentarily impermeable, dense magma plugs30, 74, 81, which may then allow pore pressure build-up (i.e., effective pressure decrease), which if sufficient, may open (or reactivate) fractures or trigger fragmentation82. Thus, we advise testing of the formulation constrained here in anticipation that it may increase constraints on fluid migration and storage in volcanic, hydrothermal and geothermal systems.
Conclusions
We present a large permeability dataset, targeted to investigate the effects of porosity, fractures and effective pressure on the permeability of variably porous volcanic rocks. We observe non-linear relationships between porosity and permeability of both intact and fractured rocks as well as between the width of a fracture (and permeability of a fractured rock) and effective pressure. We propose a general formulation to constrain the permeability of intact and fractured rocks as a function of pressure, porosity and fracture density. This study aims to incorporate heterogeneities, such as fractures, in our modelling of the permeability evolution of dynamic and heterogeneous volcanic environments.
References
Aydin, A. Fractures, faults, and hydrocarbon entrapment, migration and flow. Marine and Petroleum Geology 17, doi:10.1016/S0264-8172(00)00020-9 (2000).
Collinson, A. S. D. & Neuberg, J. W. Gas storage, transport and pressure changes in an evolving permeable volcanic edifice. Journal of Volcanology and Geothermal Research 243–244, 1–13, doi:10.1016/j.jvolgeores.2012.06.027 (2012).
Gonnermann, H. M. & Manga, M. The fluid mechanics inside a volcano. Annual Review of Fluid Mechanics 39, 321–356 (2007).
Kendrick, J. E. et al. Tracking the permeable porous network during strain-dependent magmatic flow. Journal of Volcanology and Geothermal Research 260, 117–126, doi:10.1016/j.jvolgeores.2013.05.012 (2013).
Darcy, H. Les fontaines publiques de la ville de Dijon (Dalmont, 1856).
Darcy, H. Recherches expérimentales relatives au mouvement de l’eau dans les tuyaux. (Mallet-Bachelier, 1857).
Anovitz, L. M. & Cole, D. R. Characterization and Analysis of Porosity and Pore Structures Reviews in Mineralogy and Geochemistry 80, 104, doi:10.2138/rmg.2015.80.04 (2015).
Clavaud, J.-B., Maineult, A., Zamora, M., Rasolofosaon, P. & Schlitter, C. Permeability anisotropy and its relations with porous medium structure. Journal of Geophysical Research 113, doi:10.1029/2007jb005004 (2008).
Yokoyama, T. & Takeuchi, S. Porosimetry of vesicular volcanic products by a water-expulsion method and the relationship of pore characteristics to permeability. Journal of Geophysical Research 114, doi:10.1029/2008jb005758 (2009).
Wright, H. M. N., Cashman, K. V., Gottesfeld, E. H. & Roberts, J. J. Pore structure of volcanic clasts: Measurements of permeability and electrical conductivity. Earth and Planetary Science Letters 280, 93–104, doi:10.1016/j.epsl.2009.01.023 (2009).
Kozeny, J. Uber kapillare Leitung der wasser in boden. Sitzungsber. Akad. Wiss. Wien 136, 36 (1927).
Carman, P. C. Fluid flow through granular beds. Trans IChemE 15, 17 (1937).
Carman, P. C. Flow of gases through porous media. (Butterworths Scientific, 1956).
Gueguen, Y. & Dienes, J. Transport properties of rocks frome statistics and percolation. Mathematical Geology 21, doi:10.1007/BF00897237 (1989).
Dasgupta, R., Shashwati, R. & Tarafdar, S. Correlation between porosity, conductivity and permeability of sedimentary rocks - a ballistic deposition model. Physica A 275, 10, doi:10.1016/S0378-4371(99)00388-X (2000).
Costa, A. Permeability-porosity relationship: A reexamination of the Kozeny-Carman equation based on a fractal pore-space geometry assumption. Geophysical Research Letters 33, doi:10.1029/2005gl025134 (2006).
Farquharson, J., Heap, M. J., Varley, N. R., Baud, P. & Reuschlé, T. Permeability and porosity relationships of edifice-forming andesites: A combined field and laboratory study. Journal of Volcanology and Geothermal Research 297, 52–68, doi:10.1016/j.jvolgeores.2015.03.016 (2015).
Klug, C. & Cashman, C. Permeability development in vesiculating magmas: implications for fragmentation. Bulletin of Volcanology 58, 87–100, doi:10.1007/s004450050128 (1996).
Mueller, S., Melnik, O., Spieler, O., Scheu, B. & Dingwell, D. B. Permeability and degassing of dome lavas undergoing rapid decompression: An experimental determination. Bulletin of Volcanology 67, 526–538, doi:10.1007/s00445-004-0392-4 (2005).
Nakamura, M., Otaki, K. & Takeuchi, S. Permeability and pore-connectivity variation of pumices from a single pyroclastic flow eruption: Implications for partial fragmentation. Journal of Volcanology and Geothermal Research 176, 302–314, doi:10.1016/j.jvolgeores.2008.04.011 (2008).
Rabbani, A. & Jamshidi, S. Specific surface and porosity relationship for sandstones for prediction of permeability. International Journal of Rock Mechanics and Mining Sciences 71, 25–32, doi:10.1016/j.ijrmms.2014.06.013 (2014).
Saar, M. O. & Manga, M. Permeability-porosity relationship in vesicular basalts. Geophysical Research Letters 26, 111–114, doi:10.1029/1998gl900256 (1999).
Bernabé, Y., Li, M. & Maineult, A. Permeability and pore connectivity: A new model based on network simulations. Journal of Geophysical Research 115, doi:10.1029/2010JB007444 (2010).
Kushnir, A. R. I. et al. Probing permeability and microstructure: Unravelling the role of a low-permeability dome on the explosivity of Merapi (Indonesia). Journal of Volcanology and Geothermal Research 316, 16, doi:10.1016/j.jvolgeores.2016.02.012 (2016).
Blower, J. D. Factors controlling permeability-porosity relationships in magma. Bulletin of Volcanology 63, 497–504, doi:10.1007/s004450100172 (2001).
Sukop, M. C., Van Dijk, G.-J., Perfect, E. & Van Loon, W. K. P. Percolation thresholds in 2-Dimensional Prefractal models of porous medie. Transport in Porous Media 48, 22, doi:10.1023/A:1015680828317 (2002).
Stauffer, D. & Aharony, A. Introduction to Percolation theory. 2 edn, (Taylor & Francis, 1994).
Lavallée, Y. et al. Reconstructing magma failure and the degassing network of dome-building eruptions. Geology 41, 515–518, doi:10.1130/g33948.1 (2013).
Gaunt, H. E., Sammonds, P. R., Meredith, P. G., Smith, R. & Pallister, J. S. Pathways for degassing during the lava dome eruption of Mount St. Helens 2004–2008. Geology, doi:10.1130/g35940.1 (2014).
Ashwell, P. A. et al. Permeability of compacting porous lavas. Journal of Geophysical Research: Solid Earth 120, 2014JB011519, doi:10.1002/2014JB011519 (2015).
Dobson, P. F., Kneafsey, T. J., Hulen, J. & Simmons, A. Porosity, permeability, and fluid flow in the Yellowstone geothermal system, Wyoming. Journal of Volcanology and Geothermal Research 123, 313–324, doi:10.1016/s0377-0273(03)00039-8 (2003).
Kendrick, J. E. et al. Blowing Off Steam: Tuffisite Formation As a Regulator forr Lava Dome Eruptions. frontiers in Earth Science 4, doi:10.3389/feart.2016.00041 (2016).
Heap, M. J. & Kennedy, B. M. Exploring the scale-dependent permeability of fractured andesite. Earth and Planetary Science Letters 447, 11, doi:10.1016/j.epsl.2016.05.004 (2016).
Rust, A. C., Cashman, C. & Wallace, P. J. Magma degassing buffered by vapor flow through brecciated conduit margins. Geology 32, 4, doi:10.1130/G20388.2 (2004).
Walsh, S. D. C. & Saar, M. O. Magma yield stress and permeability: Insights from multiphase percolation theory. Journal of Volcanology and Geothermal Research 177, 88, doi:10.1016/j.jvolgeores.2008.07.009 (2008).
Okumura, S., Nakamura, M., Nakano, T., Uesugi, K. & Tsuchiyama, A. Shear deformation experiments on vesicular rhyolite: Implications for brittle fracturing, degassing, and compaction of magmas in volcanic conduits. Journal of Geophysical Research: Solid Earth 115, n/a–n/a, doi:10.1029/2009JB006904 (2010).
Shields, J. K. et al. Strain-induced outgassing of three-phase magmas during simple shear. Journal of Geophysical Research: Solid Earth 119, 6936–6957, doi:10.1002/2014jb011111 (2014).
Laumonier, M., Arbaret, L., Burgisser, A. & Champallier, R. Porosity redistribution enhanced by strain localization in crystal-rich magmas. Geology 39, 4, doi:10.1130/G31803.1 (2011).
Lavallée, Y. et al. Volcanic conduit failure as a trigger to magma fragmentation. Bulletin of Volcanology 74, 11–13, doi:10.1007/s00445-011-0544-2 (2012).
Heap, M. J. et al. Microstructural controls on the physical and mechanical properties of edifice-forming andesites at Volcán de Colima, Mexico. Journal of Geophysical Research: Solid Earth 2013JB010521, doi:10.1002/2013jb010521 (2014).
Bourbie, T. & Zinszner, B. Hydraulic and Acoustic properties as a function of porosity in Fontainebleau Sandstone. Journal of Geophysical Research 90, 11, doi:10.1029/JB090iB13p11524 (1985).
Sibson, R. H. In Geofluids: Origin, Migration and Evolution of Fluids in Sedimentary Basins Vol. 78, 16 (Special Publications Geological Society London, 1994).
Lee, S. H., Lough, M. F. & Jensen, C. L. Hierarchical modeling of flow in naturally fractured formations with multiple length scales. Water resources journal 37, 13, doi:10.1029/2000WR900340 (2001).
Mourzenko, V. V., Thovert, J.-F. & Adler, P. M. Permeability of isotropic and anisotropic fracture networks, from the percolation threshold to very large densities. Physical Review 84, doi:10.1103/PhysRevE.84.036307 (2011).
Wannamaker, P. E. Anisotropy Versus Heterogeneity in Continental Solid Earth Electromagnetic Studies: Fundamental Response Characteristics and Implications for Physicochemical State. Surveys in Geophysics 26, 733–765, doi:10.1007/s10712-005-1832-1 (2005).
Walsh, J. B. Effect of pore pressure and confining pressure on fracture permeability. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 18, 7, doi:10.1016/0148-9062(81)90006-1 (1981).
Chen, M., Bai, M. & Roegiers, J.-C. Permeability tensors of anisotropic fracture networks. Mathematical Geology 31, doi:10.1023/A:1007534523363 (1999).
Rutqvist, J. Fractured rock stress-permeability relationships from in situ data and effects of temperature and chemical-mechanical couplings. Geofluids 15, 19, doi:10.1111/gfl.12089 (2015).
Zhang, X. & Sanderson, D. J. Numerical modelling and analysis of fluid flow and deformation of fractured rock masses. (Elsevier Science Ltd., 2002).
Nguyen, G. D., El-Zein, A. & Bennett, T. A conceptual approach to two-scale constitutive modelling for hydro-mechanical coupling. 7th International Congress on Environmental Geotechnics (2014).
Wadsworth, F. B. et al. Universal scaling of fluid permeability during volcanic welding and sediment diagenesis. Geology 44, 4, doi:10.1130/G37559.1 (2016).
Wang, G., Mitchell, T. M., Meredith, P. G., Nara, Y. & Wu, Z. Influence of gouge thickness and grain size on permeability of macrofractured basalt. Solid Earth, doi:10.1002/2016JB013363 (2016).
Farrell, N. J. C., Healy, D. & Taylor, C. W. Anisotropy of permeability in faulted porous sandstones. Journal of Structural Geology 63, 18, doi:10.1016/j.jsg.2014.02.008 (2014).
Simpson, G., Guéguen, Y. & Schneider, F. Permeability enhancement due to microcrack dilatancy in the damage regime. Journal of Geophysical Research: Solid Earth 106, 3999–4016, doi:10.1029/2000jb900194 (2001).
Loaiza, S. et al. Mechanical behavior and localized failure modes in a porous basalt from the Azores. Geophys. Res. Lett. 39, doi:10.1029/2012GL053218 (2012).
Benson, P. M., Thompson, B. D., Meredith, P. G., Vinciguerra, S. & Young, R. P. Imaging slow failure in triaxially deformed Etna basalt using 3D acoustic-emission location and X-ray computed tomography. Geophysical Research Letters 34, L03303, doi:10.1029/2006GL028721 (2007).
Nasseri, M. H. B., Goodfellow, S. D., Lombos, L. & Young, R. P. 3-D transport and acoustic properties of Fontainebleau sandstone during true-triaxial deformation experiments. International Journal of Rock Mechanics and Mining Sciences 69, doi:10.1016/j.ijrmms.2014.02.014 (2014).
Schubnel, A. & Gueguen, Y. Dispersion and anisotropy of elastic waves in cracked rocks. Journal of Geophysical Research 108, doi:10.1029/2002JB001824 (2003)
Fairley, J. P. Modeling fluid flow in a heterogeneous, fault-controlled hydrothermal system. Geofluids 9, 153–166, doi:10.1111/j.1468-8123.2008.00236.x (2009).
Lucia, F. J. Petrophysical parameters estimated from visual descriptions of carbonate rocks: A field classification of carbonate pore space. Journal of petroleum technology 629–637, doi:10.2118/10073-PA (1983).
Grover, D. et al. Surface permeability of natural and engineered porous building materials. Construction and Building Materials 112, doi:10.1016/j.conbuildmat.2016.02.193 (2016).
Filomena, C. M., Hornung, J. & Stollhofen, H. Assessing accuracy of gas-driven permeability measurements: a comparative study of diverse Hassler-cell and probe permeameter devices. Solid Earth 5, 1–11, doi:10.5194/se-5-1-2014 (2014).
Nara, Y., Meredith, P. G., Yoneda, T. & Kaneko, T. Influence of macro-fractures and micro-fractures on permeability and elastic wave velocities in basalt at elevated pressure. Tectonophysics 503, 8, doi:10.1016/j.tecto.2010.09.027 (2011).
Yanagidani, T., Sano, O., Terada, M. & Ito, I. The observation of cracks propagating in diametrically-compressed rocks. International Journal of Rock Mechanics and Mining Sciences 15, 10, doi:10.1016/0148-9062(78)90955-5 (1978).
Benson, P. M., Meredith, P. G., Platzman, E. S. & White, R. E. Pore fabric shape anisotropy in porous sandstones and its relation to elastic wave velocity and permeability anisotropy under hydrostatic pressure. International Journal of Rock Mechanics and Mining Sciences 42, 890–899, doi:10.1016/j.ijrmms.2005.05.003 (2005).
Benson, P. et al. Modeling the permeability evolution of microcracked rocks from elastic wave velocity inversion at elevated isostatic pressure. J. Geophys. Res.-Solid Earth 111, doi:10.1029/2005JB003710 (2006).
Wong, T.-F. Effects of temperature and pressure on failure and post-failure behavior of Westerly granite. Mechanics of Materials 1, 3–17, doi:10.1016/0167-6636(82)90020-5 (1982).
Heap, M. J., Farquharson, J. I., Baud, P., Lavallee, Y. & Reuschle, T. Fracture and compaction of andesite in a volcanic edifice. Bull Volcanol 77, 55, doi:10.1007/s00445-015-0938-7 (2015).
Armitage, P. J. et al. Experimental measurement of, and controls on, permeability and permeability anisotropy of caprocks from the CO2storage project at the Krechba Field, Algeria. Journal of Geophysical Research 116, doi:10.1029/2011jb008385 (2011).
Zhu, W. & Wong, T.-F. The transition from brittle faulting to cataclastic flow: Permeability evolution. Journal of Geophysical Research 102, 15, doi:10.1029/96JB03281 (1997).
Brace, W. F., Walsh, J. B. & Frangos, W. T. Permeability of granite under high pressure. Journal of Geophysical Research 73, doi:10.1029/JB073i006p02225 (1968).
Heap, M. J., Russell, J. K. & Kennedy, L. A. Mechanical behaviour of dacite from Mount St. Helens (USA): A link between porosity and lava dome extrusionmechanism (dome or spine)? Journal of Volcanology and Geothermal Research, doi:10.1016/j.jvolgeores.2016.10.015 (2016).
Fortin, J., Stanchits, S., Vinciguerra, S. & Gueguen, Y. Influence of thermal and mechanical cracks on permeability and elastic wave velocities in a basalt from Mt. Etna volcano subjected to elevated pressure. Tectonophysics, 503, 15, doi:10.1016/j.tecto.2010.09.028 (2011).
Edmonds, M., Oppenheimer, C., Pyle, D. M., Herd, R. A. & Thompson, G. SO2 emissions from Soufrière Hills Volcano and their relationship to conduit permeability, hydrothermal interaction and degassing regime. Journal of Volcanology and Geothermal Research 124, 23–43, doi:10.1016/s0377-0273(03)00041-6 (2003).
Eggertsson, G. H., Lavallée, Y., Kendrick, J. E. & Markússon, S. H. Enhancing permeability by multiple fractures in the Krafla geothermal reservoir, Iceland. European Geothermal Congress (2017).
Matthäi, S. K. & Belayneh, M. Fluid flow partitioning between fractures and a permeable rock matrix. Geophysical Research Letters 31, n/a–n/a, doi:10.1029/2003gl019027 (2004).
Gavrilenko, P. & Gueguen, Y. Flow in fractured media: A modified renormalization method. Water resources journal 34, doi:10.1029/97WR03042 (1998).
Farmer, C. L. Upscaling: a review. International Journal for Numerical Methods in Fluids 40, 15, doi:10.1002/fld.267 (2002).
Kendrick, J. E. et al. Seismogenic frictional melting in the magmatic column. Solid Earth 5, 199–208, doi:10.5194/se-5-199-2014 (2014).
Tuffen, H., Dingwell, D. B. & Pinkerton, H. Repeated fracture and healing of silicic magma generate flow banding and earthquakes? Geology 31, 1089–1092, doi:10.1130/G19777.1 (2003).
Lavallée, Y. et al. Magmatic architecture of dome-building eruptions at Volcán de Colima, Mexico. Bulletin of Volcanology 74, 249–260, doi:10.1007/s00445-011-0518-4 (2012).
Spieler, O. et al. The fragmentation threshold of pyroclastic rocks. Earth and Planetary Science Letters 226, 139–148, doi:10.1016/j.epsl.2004.07.016 (2004).
Acknowledgements
This study has been financed by the European Research Council (ERC) Starting Grant on Strain Localisation in Magmas (SLiM, no. 306488). G.H.E. also acknowledges financial support from the Institute for Risk and Uncertainty at the University of Liverpool and the research funds of Landsvirkjun National Power Company of Iceland.
Author information
Authors and Affiliations
Contributions
A. Lamur led the project, conducted the majority of the experiments, analysed the data, prepared all the figures and wrote the manuscript. J.E. Kendrick helped conceptualise the project, provided rock samples, supervised the work and revised the manuscript and figures. G.H. Eggertsson conducted some experiments in the hydrostatic cell and revised the manuscript. R.J. Wall participated in the initial phase of experimentation and revised the manuscript. J.D. Ashworth performed some measurements using the TinyPerm and revised the manuscript. Y. Lavallée helped conceptualise the project, provided rock samples, supervised the work, and revised the manuscript and figures.
Corresponding author
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Lamur, A., Kendrick, J.E., Eggertsson, G.H. et al. The permeability of fractured rocks in pressurised volcanic and geothermal systems. Sci Rep 7, 6173 (2017). https://doi.org/10.1038/s41598-017-05460-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-017-05460-4
- Springer Nature Limited
This article is cited by
-
The influence of alteration and fractures on gas permeability and mechanical properties of the sedimentary and volcanic rocks of the Acoculco Caldera Complex (México)
Bulletin of Engineering Geology and the Environment (2024)
-
Pressure-driven processes explain the decreasing magnetization of the subducting oceanic crust in the Japan Trench
Communications Earth & Environment (2023)
-
Damage amplification during repetitive seismic waves in mechanically loaded rocks
Scientific Reports (2023)
-
Lateral edifice collapse and volcanic debris avalanches: a post-1980 Mount St. Helens perspective
Bulletin of Volcanology (2023)
-
Modification of ceramic membranes porosity using layer deposition of kaolinite and palygorskite
Journal of the Australian Ceramic Society (2023)