Abstract
Tunable and high-sensitivity sensing based on Fano resonance is analytically and numerically investigated in coupled plasmonic cavities structure. To analyze and manipulate the Fano line shape, the coupled cavities are taken as a composite cavity that supports at least two resonance modes. A theoretical model is newly-established, and its results agree well with the finite difference time domain (FDTD) simulations for the plasmonic stub-pair structure. The detection sensitivity factor in coupled cavities approaches 6.541 × 107 m−1, which is an order of magnitude larger than single stub case. In addition, the wavelengths of resonant modes in the plasmonic stub-pair structure can be adjusted independently, which paves a new way for improving detection sensitivity. These discoveries hold potential applications for realizing tunable and highly integrated photonic devices.
Similar content being viewed by others
Introduction
Fano resonance, originating from destructive interference between narrow discrete state and broad continuum state, exhibits sharp asymmetric profiles and strong field enhancement1,2,3, which may benefit enhanced spectroscopy4, optical switches5, chemical or biological sensing6, 7, low-loss waveguiding, and nonlinear optical effects. Surface plasmon polaritons (SPPs) can break the classical diffraction limit and enable manipulating light in sub-wavelength structures, so diverse plasmonic nanostructures such as core-shell nanoparticles8, ring-disk cavities9, nano-slits10, 11 and nanowire lattices12 have been proposed theoretically and experimentally to achieve Fano resonance. However, the arrayed structures are typically bulky for highly integrated optical circuits, which motivates an ongoing search for ultra-compact plasmonic structure realizing Fano resonance.
Among various plasmonic structures, metal-dielectric-metal (MDM) waveguide, supporting modes with deep subwavelength scale, ease of fabrication, and zero bend losses13,14,15,16, promises the miniaturization of optical devices and has attracted much attention. Recently, the optical properties of MDM waveguide-cavity systems exhibit symmetrical or asymmetrical line shapes, and have been studied by the scattering matrix method17, transmission line theory18, quantum-optics approach19, 20, and temporal coupled-mode theory (CMT)17, 21, which are considered as a crucial step for development of integrated photonic circuits22,23,24,25,26. It is well known that, with variation of nearby or surrounding medium, the transmission and reflection change at fixed wavelength or mode shift can be utilized as sensing signals. In particular, the sharp asymmetrical Fano resonance supported by coupled cavities enables high detection sensitivity in information processing6, 7, 27,28,29. Lu et al. demonstrated a nanosensor in MDM waveguide-cavity system30 and yielded a figure of merit (FOM) of ~500. Chen et al. proposed a near-infrared plasmonic refractive index sensor which consists of a fillet cavity coupled with two MDM waveguides31. In addition, Huang and co-workers introduced slow-light enhanced refractive index sensor composed of plasmonic MDM waveguide32. However, more feasible theoretical model and straightforward approach are desirable to control and tune the spectral response.
In this paper, we numerically and analytically demonstrate tunable and high-sensitivity sensing performances based on Fano resonance in plasmonic coupled cavities system. The coupled cavities are interpreted as a composite cavity, in which the interference between coexisting modes contributes to Fano line shape20, 33. A newly-established theoretical model is in good agreement with the FDTD simulations for the plasmonic stub-pair structure. Compared with single cavity case, the coupled plasmonic cavities structure exhibits much sharper asymmetric Fano line shape, and produces an order of magnitude enhancement in detection sensitivity. Moreover, the resonant positions of bright mode and dark mode in the stub-pair structure can be adjusted independently, which promises solutions for realizing and tuning the high detection sensitivity.
Theoretical model
Figure 1(a) shows the schematic (sectional view) of coupled cavities structure, which is composed of a bus waveguide coupled to multiple resonators. The indirect couplings between resonators are not discussed here. In order to control and tune Fano resonance spectra in coupled cavities system, the coupled cavities are creatively treated as a composite cavity, as shown in Fig. 1(b). An analytical theory based on the CMT17, 21 is proposed to explore the underlying physics of spectral responses. Then, the characteristic equations for the evolutions of cavity modes can be expressed as follows
S ±in and S ±out stand for the amplitudes of incoming and outgoing waves in bus waveguide. \(|a\rangle \) and \(|{\rm{K}}\rangle \) represent field amplitude of resonant mode and coupling coefficient between resonator and bus waveguide, respectively \(\langle {\rm{K}}|\) is dependent on \(|{\rm{K}}\rangle \). They can be written as
where a N denotes amplitude of the N-th mode with resonance frequency ω N , and k N stands for the coupling between waveguide and cavity.
In Eq. (1), Ω, Γ i , Γ e , and Μ matrixes, respectively, denote resonance frequencies, intrinsic loss rate, external loss rate of cavity, and coupling coefficients between resonant modes. They are given as
In Ω, Γ i , Γ e , and Μ matrixes, if p ≠ q, ω pq = 0, γ ipq = 0, γ epq = 0, and μ pq = ω qq /(2Q pq ); if p = q, ω pq = ω p , γ ipq = ω pq /(2Q ip ), γ epq = ω pq /(2Q ep ), and μ pq = 0. Q ip , Q ep , and Q pq are cavity quality factors related to intrinsic loss, waveguide coupling loss, and coupling between the pth and qth modes. Using boundary conditions of S −in = 0 and Eqs (1–3), one can get the power transmission T N = |S +out /S +in |2 and power reflection R N = |S −out /S +in |2.
When N = 1, the power transmission of system is written as
When N = 2, the power transmission can be expressed as
where σ 1 = (jω − jω 1 − γ i11 − γ e11), σ 2 = (jω − jω 2 − γ i22 − γ e22), t 1 = 1 + γ e11/σ 1, t 2 = 1 + γ e22/σ 2.
Plasmonic stub-pair structure
To verify our theoretical model, the plasmonic stub-pair structure depicted in Fig. 2(a) is taken as an example, which consists of MDM bus waveguide side-coupled to a pair of stub resonators with the width of bus waveguide (w), length (L 1 and L 2) and width (w) of the stub resonators. The insulator and metal in the structure are, respectively, air and silver. The permittivity of silver, ε(ω) = 1 − ω p 2/(ω 2 + iωγ p ), is characterized by the Drude model, with ω p = 1.38 × 1016 rad/s and γ p = 2.73 × 1013 rad/s34. The perfect matched layer (PML) boundary conditions are applied to the FDTD simulations, and the spatial steps are set as 5 nm × 5 nm. With incident light polarized parallel to the stubs, surface plasmon mode can be excited and confined in waveguide. In this paper, the widths of bus waveguide and stub cavities are all equal to 100 nm, and transmittance are numerically calculated by the FDTD method.
Figure 2(b) illustrates Lorentzian-like transmission spectra for plasmonic resonator system with single stub. The blue line and red line correspond to L 1 = 493 nm and L 2 = 144 nm, respectively. For these two cases, the resonant wavelengths in Fig. 2(b) are both λ = 860.2 nm, and the full width at half maximum (FWHM) of transmission spectra are 155.2 nm and 476.3 nm, respectively. It is well known that the interference between narrowband resonant mode (for the case of single stub system with L 1 = 493 nm) and broadband resonant mode (for the case of single stub system with L 2 = 144 nm) gives rise to Fano resonance1, 19, 29, 35. Using the coupled-cavity structure in Fig. 2(a) with L 1 = 493 nm and L 2 = 144 nm, we obtain a sharp asymmetric Fano line shape in transmission spectra, as shown in Fig. 2(c). The transmittances for transmission dips at λ = 806.7 nm and λ = 924.4 nm are 0.00001858 and 0.00263, respectively. In Fig. 2(b) and (c), we present the comparison between the analytical and simulated transmission spectra. For analytical transmission spectra, ω 1 = 2.19 × 1015 rad/s, ω 2 = 2.19 × 1015 rad/s, Q i1 = 200, Q i2 = 200, Q e1 = 10, Q e2 = 3, Q 12 = 10. Obviously, the analytical results are in good agreement with the FDTD simulations, which indicates the validity of the theoretical model. Consequently, the theoretical analyses set up a platform to understand the Fano-resonance spectra in coupled cavities system, and may guide design with tunable optical responses.
To better understand the formation mechanisms of Fano line shape, Fig. 2(d–f) show the field distributions (H z ) of SPPs at different wavelengths (λ = 806.7 nm, λ = 913.7 nm, and λ = 924.4 nm) in Fig. 2(c). The field distribution in Fig. 2(e) shows that the input light at Fano resonance peak can pass through the waveguide, which arises from the destructive interference between narrowband and broadband resonant modes1, 19, 20, 35. Interestingly, Fig. 2(d) and (f) illustrate that the stub-pair can be taken as a composite cavity, in which the resonance modes correspond to transmission dips. Relative to bus waveguide, the mode in phase shown in Fig. 2(d) enhances the coupling between bus waveguide and composite cavity, which corresponds to broadband resonant mode and plays the role of bright mode (quasi-continuum energy state) in conventional Fano system19. In Fig. 2(f), the mode out of phase reduces the coupling between bus waveguide and composite cavity, which corresponds to narrowband resonant mode and plays the role of dark mode (quasi-discrete energy state). In other words, the Fano resonance line shape in the plasmonic stub-pair system can also be attributed to the interference between composite cavity modes through the MDM bus waveguide20, 25, 29, 33.
Sensing performance based on Fano resonance
It has been proposed that the asymmetric response line shape with sharp slope in Fano resonance may find applications in label-free, ultra-sensitive, microcavity-based biosensors21, 36. The Fano resonance will shift to short-wavelength or long-wavelength direction when the nearby or surrounding medium changes. Here, the resonant wavelength in stub is determined by37
where n eff , L, and m (m = 0, 1, 2, …) are, respectively, the real part of effective refractive index for SPPs23, 26, length, and the order of resonance mode in stub resonator. The resonant wavelength is proportional to n eff and L.
Then, we get
For a given detection wavelength, to the refractive index (n) of surrounding medium, the derivation of transmission efficiency T can be written as
The detection sensitivity of the plasmonic system can be defined as |dT/dn|. Based on Eqs (7) and (8), for simplicity, the detection sensitivity can also be expressed as27
According to Eq. (9), we illustrate the sensitivity factor S (the slope of transmission spectra versus detection wavelength) as a function of detection wavelength for different plasmonic resonator system in Fig. 3(a–c). Combining Figs 2(b,c) and 3(a–c), we can conclude that the detection sensitivity S provides us a way to exhibit spectral asymmetry and investigate the sensitivity of sensor38, 39. For the single stub case with L 1 = 493 nm, the detection sensitivity in Fig. 3(a) approaches 9.256 × 106 m−1, while the detection sensitivity in Fig. 3(b) reaches 3.742 × 106 m−1 for single stub case with L 2 = 144 nm, which indicates that the length of stub resonator offers an efficient way to tune the sensitivity. In Fig. 3(c), for the plasmonic stub-pair system with L 1 = 493 nm and L 2 = 144 nm, the detection sensitivity approaches 6.541 × 107 m−1. That is to say, the transmission efficiency will deviate by 0.3271 even when the detection wavelength changes by less than 5 nm. Compared with the single stub in Fig. 3(a) and (b), the stub-pair apparently brings an order of magnitude enhancement in sensitivity.
Figure 4(a) shows the transmission spectra versus refractive index of surrounding medium, in which the Fano resonance shifts towards long-wavelength direction with the increase of refractive index, whereas the intensities of Fano resonance peak and resonance dip keep constant. To better characterize the performance of sensing system, the figure of merit (FOM) is one of the key parameters, which can be expressed as FOM = [T(n + Δn) − T(n)]/[T(n)Δn] = ΔT/(TΔn) at fixed wavelength40,41,42. ΔT denotes the transmission intensity variation, and Δn stands for the change of surrounding refractive index. T(n + Δn) and T(n) are transmission rate in nanoplasmonic structure. As refractive index increases from 1.00 to 1.01, in Fig. 4(b), we plot the FOM for plasmonic stub-pair system and two corresponding single stub structures. For the single stub case with L 1 = 493 nm (L 2 = 144 nm), the maximum FOM is about 4871 (1289); for the stub-pair system, the left and right maximum FOMs (labeled as P1 and P2, respectively) approach 4218 and 9673, respectively. The results indicate that coupled-cavity offers a method to improve the FOM for refractive index sensing.
In order to investigate the FOM more thoroughly, for the stub-pair structure, Fig. 4(c) shows the maximum of FOM (FOMmax) versus refractive index n. According to the definition of FOM, as refractive index n increases from 1.00 to 1.03 with a step of 0.005, T(n) corresponds to T(1.00), and T(n + Δn) corresponds to T(1.005), T(1.01), T(1.015), T(1.02), T(1.025) and T(1.03), respectively. As shown in Fig. 4(c), when refractive index n increases from 1.00 to 1.03, P1 increases linearly, but P2 increases first and then decreases, which means that FOMmax is dependent on the increment of refractive index Δn. In Fig. 4(d), we present the FOM for different ranges of surrounding refractive index, such as 1.01–1.02, 1.02–1.03, 1.03–1.04, 1.04–1.05, and 1.05–1.06. In this case, the change of refractive index Δn equals 0.01, and T(n + Δn) corresponds to T(1.01), T(1.02), T(1.03), T(1.04), T(1.05) and T(1.06), respectively. It can be obtained that the maximum of P1 increases and decreases alternately, while P2 approaches 1.6 × 104 in the ranges of 1.02–1.03 and 1.03–1.04. That is to say, the sensing performances are also related to the range of refractive index. These results may lay a basis for fundamental research of ultra-compact plasmonc sensor applications.
It is well known that spectral asymmetry plays a critical role in applications of Fano resonance. Therefore, the control of Fano line shape has been a topic of investigations. Because the Fano resonance arises from the interference between dark mode (narrowband resonant mode) and bright mode (broadband resonant mode), independent control of resonant mode is useful for precise control of Fano resoance in highly integrated optical circuits. In Fig. 5(a) and (b), we present the transmission spectra versus L 1 for the plasmonic stub-pair system. The other constructive parameters are fixed as w = 100 nm, L 1 + L 2 = 637 nm. Obviously, the asymmetry of Fano resonance line shape can be adjusted by L 1. To better investigate the evolution of spectral asymmetry versus L 1, we display the wavelengths of bright mode (black line), dark mode (red line), and Fano peak (blue line) as a function of L 1 in Fig. 5(c). As can be clearly seen, when L 1 increases from 463 nm to 528 nm, the Fano peak wavelength is nearly unchanged; when L 1 increases from 463 nm to 493 nm, the wavelength gap between bright mode (dark mode) and Fano peak is nearly constant (becomes smaller); when L 1 increases from 493 nm to 528 nm, the wavelength gap between bright mode (dark mode) and Fano peak becomes larger (is unchanged). As mentioned above, with constant sum of L 1 and L 2 in the plasmomic stub-pair structure, the wavelengths of bright mode and dark mode can be adjusted independently by L 1, which provides an additional degree of freedom to control the slope of Fano resonance spectra and, thus, indicates the tunability of detection sensitivity in the plasmonic nanostructure.
Conclusion
In summary, we have analytically and numerically investigated tunable and high-sensitivity sensing performances based on Fano resonance in plasmonic coupled cavities system. Based on the CMT, the coupled cavities can be taken as a composite cavity. Using the plasmonic stub-pair structure as an example, the analytical spectral responses are consistent with the FDTD simulations, which confirms our theoretical model, and implies that Fano resonance line shape in plasmonic stub-pair system results from the interference between composite cavity modes through MDM bus waveguide19, 20, 33. The detection sensitivity factor in coupled cavities approaches 6.541 × 107 m−1, and is an order of magnitude larger than single stub case. Moreover, the effects of structure parameters and surrounding medium play important roles on sensing performances. In particular, the wavelengths of bright mode and dark mode in the plasmomic stub-pair structure can be adjusted independently, which may open up avenues for improving detection sensitivity. These results may be helpful for realizing high-sensitivity sensor in integrated optical circuits.
Methods
The relative permittivity of silver is described by the Drude model: ε(ω) = ε ∞ − ω p 2 /(ω 2 + iωγ p ), with the dielectric constant at infinite angular frequency ε ∞ = 3.7, the bulk plasma frequency ω p = 1.38 × 1016 rad/s and the electron collision frequency γ p = 2.73 × 1013 rad/s. The spectral responses of the structure are investigated with the FDTD method using FDTD Solutions. The calculation domain is surrounded by perfectly matched layer (PML) absorbing boundary, and the simulation parameters have been given in our paper.
References
Miroshnichenko, E., Flach, S. & Kivshar, Y. S. Fano resonances in nanoscale structures. Rev. Mod. Phys. 82, 2257–2298 (2010).
Luk’yanchuk, B. et al. The Fano resonance in plasmonic nanostructures and metamaterials. Nat. Mater. 9, 707–715 (2010).
Verellen, N. et al. Fano resonances in individual coherent plasmonic nanocavities. Nano Lett. 9, 1663–1667 (2009).
Wu, C. et al. Fano-resonant asymmetric metamaterials for ultrasensitive spectroscopy and identification of molecular monolayers. Nat. Mater. 11, 69–75 (2012).
Chang, W. S. et al. A plasmonic Fano switch. Nano Lett. 12, 4977–4982 (2012).
Qiu, W. T., Ndao, A., Lu, H. H., Bernal, M. P. & Baida, F. I. Guided resonances on lithium niobate for extremely small electric field detection investigated by accurate sensitivity analysis. Opt. Express 24, 20196–20209 (2016).
Zhao, J., Zhang, C., Braun, P. V. & Giessen, H. Large-area low-cost plasmonic nanostructures in the NIR for Fano resonant sensing. Adv. Mater. 24, 247–252 (2012).
Mukherjee, S. et al. Fanoshells: nanoparticles with built-in Fano resonances. Nano Lett. 10, 2694–2701 (2010).
Hao, F., Nordlander, P., Sonnefraud, Y., Dorpe, P. V. & Maier, S. A. Tunability of subradiant dipolar and Fano-type plasmon resonances in metallic ring/disk cavities: implications for nanoscale optical sensing. ACS Nano 3, 643–652 (2009).
Wu, S. H. et al. Cell viability monitoring using Fano resonance in gold nanoslit array. Appl. Phys. Lett. 103, 133702 (2013).
Belotelov, V. I. et al. Enhanced magneto-optical effects in magnetoplasmonic crystals. Nat. Nanotechnol. 6, 370–376 (2011).
Christ, A. et al. Controlling the Fano interference in a plasmonic lattice. Phys. Rev. B 76, 201405 (2007).
Cai, W. S., Shin, W., Fan, S. H. & Brongersma, M. L. Elements for plasmonic nanocircuits with threedimensional slot waveguides. Adv. Mater. 22, 5120–5124 (2010).
Neutens, P., Van Dorpe, P., De Vlaminck, I., Lagae, L. & Borghs, G. Electrical detection of confined gap plasmons in metal-insulator-metal waveguides. Nat. Photonics 3, 283–286 (2009).
Salamin, Y. et al. Direct conversion of free space millimeter waves to optical domain by plasmonic modulator antenna. Nano Lett. 15, 8342–8346 (2015).
Han, Z. H. & Bozhevolnyi, S. I. Radiation guiding with surface plasmon polaritons. Rep. Prog. Phys. 76, 016402 (2013).
Haus, H. A. Waves and fields in optoelectronics (Prentice-Hall, New Jersey, 1984).
Min, C. & Veronis, G. Absorption switches in metal–dielectric–metal plasmonic waveguides. Opt. Express 17, 10757–10766 (2009).
Li, B. B. et al. Experimental observation of Fano resonance in a single whispering-gallery microresonator. Appl. Phys. Lett. 98, 021116 (2011).
Cao, G. T., Li, H. J., Zhan, S. P., He, Z. H. & Li, B. X. Plasmon-induced transparency in a single multimode stub resonator. Opt. Express 22, 25215–25223 (2014).
Li, J. H., Yu, R., Ding, C. L. & Wu, Y. PT -symmetry-induced evolution of sharp asymmetric line shapes and high-sensitivity refractive index sensors in a three-cavity array. Phys. Rev. A 93, 023814 (2016).
Huang, Y., Min, C. J. & Veronis, G. Broadband near total light absorption in non-PT-symmetric waveguide-cavity systems. Opt. Express 24, 22219–22231 (2016).
Lu, H., Liu, X. M. & Mao, D. Plasmonic analog of electromagnetically induced transparency in multinanoresonator-coupled waveguide systems. Phys. Rev. A 85, 053803 (2012).
Yu, Z. F., Veronis, G., Fan, S. H. & Brongersma, M. L. Gain-induced switching in metal-dielectric-metal plasmonic waveguides. Appl. Phys. Lett. 92, 041117 (2008).
He, Z. et al. Theoretical analysis of ultrahigh figure of merit sensing in plasmonic waveguides with a multimode stub. Opt. Lett. 41, 5206–5209 (2016).
Cao, G. T. et al. Uniform theoretical description of plasmon-induced transparency in plasmonic stub waveguide. Opt. Lett. 39, 216–219 (2014).
Xiao, Y. F., Gaddam, V. & Yang, L. Coupled optical microcavities: an enhanced refractometric sensing configuration. Opt. Express 16, 12538–12543 (2008).
Fan, S. H. Sharp asymmetric lineshapes in side-coupled waveguide–cavity systems. Appl. Phys. Lett. 80, 908–910 (2002).
Xiao, Y. F. et al. Asymmetric Fano resonance analysis in indirectly coupled microresonators. Phys. Rev. A 82, 065804 (2010).
Lu, H., Liu, X. M., Mao, D. & Wang, G. X. Plasmonic nanosensor based on Fano resonance in waveguide-coupled resonators. Opt. Lett. 37, 3780–3782 (2012).
Chen, L. et al. Numerical analysis of a near-infrared plasmonic refractive index sensor with high figure of merit based on a fillet cavity. Opt. Express 24, 9975–9983 (2016).
Huang, Y., Min, C. J., Dastmalchi, P. & Veronis, G. Slow-light enhanced subwavelength plasmonic waveguide refractive index sensors. Opt Express 23, 14922–14936 (2015).
Xiao, Y. F., He, L., Zhu, J. & Yang, L. Electromagnetically induced transparency-like effect in a single polydimethylsiloxane coated silica microtoroid. Appl. Phys. Lett. 94, 231115 (2009).
Palik, E. D. Handbook of optical constants in solids (Academic, 1982).
Chen, J. J. et al. Tuning Fano resonances with a nano-chamber of air. Opt. Lett. 41, 2145–2148 (2016).
Wang, C. & Search, C. P. Nonlinearly enhanced refractive index sensing in coupled optical microresonators. Opt. Lett. 39, 26–29 (2014).
Tao, J., Hu, B., He, X. Y. & Wang, Q. J. Tunable subwavelength terahertz plasmonic stub waveguide filters. IEEE Trans. Nanotechnol. 12, 1191–1197 (2013).
He, G. Z. Coll. Math. 25, 196–198, (2009).
Fichtenholz, G. M. Differential and integral calculus I (Higher Education, Beijing, 2006).
Bera, M. & Ray, M. Circular phase response based analysis for swapped multilayer metallo-dilelectric plasmonic structures. Plasmonics 9, 237–249 (2014).
Ameling, R. et al. Cavity-enhanced localized plasmon resonance sensing. Appl. Phys. Lett. 97, 253116 (2010).
Roh, S., Chung, T. & Lee, B. Overview of the characteristics of micro- and nano-structured surface plasmon resonance sensors. Sensors 11, 1565–1588 (2011).
Acknowledgements
The authors acknowledge the support provided by the State Key Program for Basic Research of China (2013CB632705), the National Natural Science Foundation of China (11334008, 11447240, 11564014, 61290301 and 61521005), the Natural Science Foundation of Hunan Province (2015JJ6092, 2016JJ6123), the Fund of Shanghai Science and Technology Foundation (16JC1400400, 16ZR1445300), Research Foundation of Education Bureau of Hunan Province (15B191), Shanghai Sailing Program (16YF1413200), and Youth Innovation Promotion Association CAS (2017285).
Author information
Authors and Affiliations
Contributions
X.C. and W.L. supervised the project, Y.D. and G.C. performed numerical simulation, analyzed the data and edited the figures. H.Y. and G.L. gave some valuable suggestions on analyzing the data. All authors participated in the discussion of the project. Y.D. and G.C. wrote the manuscript with contributions from all authors.
Corresponding authors
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Deng, Y., Cao, G., Yang, H. et al. Tunable and high-sensitivity sensing based on Fano resonance with coupled plasmonic cavities. Sci Rep 7, 10639 (2017). https://doi.org/10.1038/s41598-017-10626-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-017-10626-1
- Springer Nature Limited
This article is cited by
-
A proposal for an ultra-sensitive nano-displacement sensing system based on all-dielectric metamaterials with tunable ultra-sharp Fano resonance peaks
Optical and Quantum Electronics (2024)
-
Realizing multiple Fano resonance in an end-coupled semi-ring resonator-coupled waveguide structure
Journal of Optics (2023)
-
Supercontinuum generation in a nonlinear ultra-silicon-rich nitride waveguide
Scientific Reports (2022)
-
Compact and Sensitive H-Shaped Metal–Dielectric–Metal Waveguide Plasmonic Sensor
Plasmonics (2022)
-
Plasmon-induced transparency sensor for detection of minuscule refractive index changes in ultra-low index materials
Scientific Reports (2021)