Abstract
In this paper, one kind of novel non-periodic spoof surface plasmon polaritons (SSPPs) with H-shaped cells is proposed. As we all know, the cutoff frequency exists inherently for the conventional comb-shaped SSPPs, which is a kind of periodic groove shape structures and fed by a conventional coplanar waveguide (CPW). In this work, instead of increasing the depth of all the grooves, two H-shaped cells are introduced to effectively reduce the cutoff frequency of the conventional comb-shaped SSPPs (about 12 GHz) for compact design. More importantly, the guide waves can be gradually transformed to SSPP waves with high efficiency, and better impedance matching from 50 Ω to the novel SSPP strip is achieved. Based on the proposed non-periodic SSPPs with H-shaped cells, a wideband bandpass filter (the 3-dB fractional bandwidths 68%) is realized by integrating the spiral-shaped defected ground structure (DGS) etched on CPW. Specifically, the filter shows high passband selectivity (Δf3 dB/Δf20 dB = 0.91) and wide upper stopband with −20 dB rejection. A prototype is fabricated for demonstration. Good agreements can be observed between the measured and simulated results, indicating potential applications in the integrated plasmonic devices and circuits at microwave and even THz frequencies.
Similar content being viewed by others
Introduction
In nature, surface plasmon polaritons (SPPs) only exists at optical frequencies, in which special surface electromagnetic waves modes can propagate on the interface between metal and dielectric1,2. SPPs are highly bound at the metal- dielectric interface and the normal components of electric fields decay exponentially in the transverse direction in near-infrared and visible frequencies. However, in microwave, THz and far-infrared frequency bands, metals behave like perfectly electrical conductors (PECs) without negative permittivity so that they cannot support SPP modes. To overcome the drawback, the concept of spoof SPP metamaterials has been proposed to propagate the plasmonic waves by etching metal surface with periodic subwavelength grooves or holes3,4,5,6,7. As we all know, excellent physical characteristics of the so-called SSPPs can be realized by adjusting the geometrical parameters conveniently. Nevertheless, the efficient conversion and transition between the conventional spatial modes and SPP modes is still a challenge. In recent years, several valuable works have been reported to solve the problem in which the matched momentum and impedance can be achieved between common planar transmission lines (such as CPW7,8,9,10,11, microstrip line12,13,14, slot line15,16,17) and SSPP waveguide.
The design of microwave devices and circuits is becoming more and more diverse based on different theories, materials, technologies, forms of transmission lines and so on18,19,20,21. For further study of SSPPs, it is promising to realize plasmonic functional integrated circuits at microwave and even THz frequencies. Lots of researches have been focused on the SSPPs-based devices, including filters16,22,23,24,25,26, directional couplers27,28, power dividers29,30, antennas31,32,33 etc. As we all know, filters are basic and key components in microwave and wireless communication systems, some filters based on SSPPs have also been investigated in recent years. For instance, an ultra-wideband filter with high performance was realized by etching double gratings16. However, it was fed by a transducer consisting of step slot lines and gradient corrugated grooves, the port matching for simulation and actual test are thus complex and difficult. Band-pass characteristic was obtained by combining the low-pass feature of the SSPP transmission line with the high-pass feature of substrate integrated waveguide (SIW)22. Unfortunately, the additional structures cause more bulky and larger circuit size. In addition, a flexible dielectric film was introduced to produce frequency-selective SSPPs23. The structure is composed of two oppositely oriented single-side corrugated strips coupled to two double-side corrugated strips. Another coupled structure constructed by asymmetric grooved strips can also achieve broadband band-pass response24, while its out-of-band suppression was further improved. Besides, the frequency-spectrum-controllable SSPPs were proposed by utilizing coupled SRR particles loaded varactor-diodes25. The SSPP fields are cut off at the places where the corresponding SRRs are resonant so that multiple controllable rejection bands can be realized. Recently, a compact wideband plasmonic filter with flat-top transmission response has been proposed26, however, its upper stopband rejection level needs to be further improved. Most of above proposed filters feature good in-band transmission characteristic but ignore other important performance indexes such as out-of-band rejection and passband selectivity. Therefore, further performance improvement of the filters based on SSPPs is still required.
In this paper, a kind of novel non-periodic SSPPs loaded with two H-shaped cells in the center of the conventional comb-shaped structure is proposed. The cutoff frequency of the new structure decreases a lot and can be adjusted by changing the parameters of H-shaped cells flexibly. More importantly, the proposed structure not only has wide adjustable frequency range but also can realize better impedance matching. Based on the above design ideas, the spiral-shaped DGS etched on CPW is used to feed the proposed non-periodic SSPPs for filter design. A very narrow stopband response can thus be generated at the edge of the passband at the low frequency, while high selectivity of the wideband bandpass filter can be achieved. The proposed structure is compact without adding other components and has good filtering characteristic, indicating potential applications in the plasmonic integrated circuits and communication systems in the future.
Analysis and Results
Novel non-periodic SSPPs
As shown in Fig. 1(a), a new structure consisting of the traditional comb-shaped SSPPs and two loaded H-shaped cells is proposed and fabricated on the Rogers 4003 with relative permittivity of 3.38, electric loss tangent of 0.0027. The yellow part is metal (copper) with thickness of 0.018 mm and the grey part is the substrate with thickness of 1.016 mm. The parameters in Fig. 1(a) are set as: l1 = 18 mm, l2 = 25 mm, l3 = 22 mm, and wg = 25 mm. To realize the 50-Ω characteristic impedance at the port, the CPW parameters in Fig. 1(b) are determined as: w0 = 4.6 mm, and g = 0.3 mm. Here, the conversion part from CPW to the traditional comb-shaped SSPPs is composed of the gradient groove and the optimized curve of flaring ground. To obtain the broadband momentum matching, the depth of gradient grooves varies from 0 to 2.1 mm. The function expression of the optimized curve in part II can be described as:
where r = y1 − y0 = wg. P0(x0, y0), P1(x1, y1) in Fig. 1(a) are established coordinates of the start and the end point of function curve. As shown in Fig. 1(c), for the traditional comb-shaped SSPPs, the total width d, the period p, the width of metallic grooves a, and the depth h are chosen as 2.5 mm, 2.5 mm, 1.8 mm, 2.1 mm, respectively. In addition, two loaded H-shaped cells are symmetrically distributed on both sides at the center of the structure. The cutoff frequency of the new non-periodic SSPPs thus decreases a lot with good transmission characteristics in the passband. The parameters of every H-shaped cell in Fig. 1(d) are set as: h1 = 1.8 mm, h2 = 2.1 mm, and wt = 0.7 mm.
Figure 2(a) gives the simulated comparison results between the proposed structure with two symmetrical H-shaped cells and the traditional structure without two H-shaped cells. Obviously, it can be seen that the cutoff frequency decreases about 12 GHz (from 17.3 GHz to 5.3 GHz). Remarkably, the return loss is less than −20 dB in the passband for the proposed structure, implying that better impedance matching is achieved. Figure 2(b) shows that the depth of H-shaped cells h2 can control the cutoff frequency of the proposed novel non-periodic SSPPs and has little influence on the reflection coefficient |S11|. When h2 uniformly varies from 1.1 mm to 3.1 mm, the cutoff frequency moves to lower frequency. The 3-dB passband bandwidths are 3.62 GHz, 3.32 GHz, 3.02 GHz, 2.72 GHz, and 2.46 GHz, respectively, with the maximum transmission coefficients as −1.09 dB, −1.12 dB, −1.18 dB, −1.34 dB, and −1.52 dB. To obtain flatter in-band return loss, h2 can be determined as 2.1 mm. Besides the good passband performance, the wide and flexible cutoff frequency range is realized by loading compact H-shaped cells instead of increasing the depth of all the grooves.
To further verify the accuracy in the microwave frequency, the fabricated novel non-periodic SSPPs with two symmetrical H-shaped cells is shown in Fig. 3(a) for demonstration. The simulated and measured results are illustrated in Fig. 3(b) with a great agreement. The measured 3-dB passband bandwidth is 73.7% from 2.64 GHz to 5.72 GHz with the operating frequency at 4.18 GHz. The proposed novel structure only has around 1.4 dB transmission loss with the return loss |S11| less than −20 dB in the passband, which indicate a good impedance matching between the CPW and the SSPPs. The group delay is less than 0.9 ns in the whole passband. Furthermore, the fabricated non-periodic SSPPs structure has a wideband out-of-band 18-dB rejection from 6.4 GHz to 10.3 GHz.
High selectivity wideband bandpass filter
In microwave circuits design, DGS is usually applied to change the distributed inductance and capacitance of the transmission line so that the band-stop responses and slow-wave characteristics can be obtained34. To improve the passband selectivity of the proposed novel non-periodic SSPPs, the spiral-shaped DGS for CPW is firstly introduced to SSPPs filter design. As shown in Fig. 4, a high selectivity wideband bandpass filter is proposed and fabricated on Rogers 4003 with thickness of 1.016 mm. Compared with the structure in Fig. 1(a), only four symmetrical spiral-shaped DGS are added at the input port and output port of the new structure. According to the enlarged view in Fig. 4, the distance between the first spiral-shaped DGS and the port lp is 8 mm and the distance between two spiral-shaped DGS lg is 3.5 mm. The parameters of every DGS are set as: w1 = 0.25 mm, w2 = 0.25 mm, la = 3.25 mm, and lb = 4 mm. In addition, some original parameters are changed: wg = 30 mm, l1 = 31 mm, l2 = 28. 5 mm, and l3 = 9 mm, while other parameters of comb-shaped SSPPs and H-shaped cells in Fig. 4 are the same as those in Fig. 1. The function expression of the optimized curve in part II can be described as:
where k is the exponential factor of the curve and here we choose k = 3.2. P0(x0, y0) and P1(x1, y1) in Fig. 4 are established coordinates of the start and the end point of function curve, the following conditions should be satisfied: x1 − x0 = l2, y1 − y0 = wg.
The band-stop effect of the proposed spiral-shaped DGS resonator can be modelled as a parallel RLC resonance circuit shown in Fig. 5(a). As we all known, changing topologies and geometrical dimensions of the DGS can easily control the equivalent inductance and capacitance of the resonator. Based on transmission line theory and utilization of simulated scattering parameters, the parameters of the resonance circuit for the resonator can be extracted as:
where w0i is the angular resonance frequency, wci is the 3 dB angular cutoff frequency and Z0 is the characteristic impedance of the microstrip line. According to the above formulas, the values of the circuit elements are: R1 = 6.8 kΩ, L1 = 1.7427 nH, C1 = 2.566 pF, R2 = 7.6 kΩ, L2 = 0.5126 nH, and C2 = 1.459 pF. As shown in Fig. 5(b), the two resonance frequency f01 and f02 of the equivalent circuit agree well with the two transmission zeros near the passband of the proposed wideband bandpass filter. To show the transmission characteristic intuitively, the simulated near-electric-field distributions of the proposed structure at different frequencies are given in Fig. 6. The frequency points are chosen as 2.4, 4, 5.8 and 9 GHz, which represent the stopband near the first transmission zero, the passband, the stopband near the second transmission zero and the upper stopband, respectively. We can notice that for the stopband shown in Fig. 6(a),(c) and (d), the energy cannot propagate through the center SSPPs structure, while in Fig. 6(b), the energy can propagate intensively and steadily in the passband.
The photograph of the fabricated high selectivity wideband bandpass filter and its simulated and measured results of S-parameters are shown in Fig. 7. Obviously, the measured results agree well with the simulated results in Fig. 7(b). The measured 3-dB passband bandwidth is 68% from 2.72 GHz to 5.52 GHz with the operating frequency at 4.12 GHz. The reflection coefficient is less than −9 dB with the transmission loss around 2.5 dB in the passband. The group delay is less than 0.9 ns in the whole passband. Most importantly, two transmission zeros near the passband at 2.42 and 6.06 GHz lead to high passband selectivity (Δf3 dB/Δf20 dB = 0.91). It is widely known that Δf3 dB/Δf20 dB is named as square ratio, and it is closer to one, the passband selectivity is better. Meanwhile, the fabricated filter has a wide upper stopband with −20 dB rejection from 5.7 GHz to 10.8 GHz. In addition, the comparison of measured results of our work with previously published reports have been carried out and listed in Table 1. Compared with other wideband bandpass filters based on SSPPs, the passband selectivity of the proposed filter is especially excellent, and more transmission zeros have been realized to improve the upper stopband rejection.
Conclusion
In this paper, a novel non-periodic SSPPs structure is proposed and used for high selectivity wideband bandpass filter design. The non-periodic SSPPs structure is composed of traditional comb-shaped metal strip, two loaded H-shaped cells and CPW transition. Good passband response and impedance matching can be obtained directly, meanwhile its cutoff frequency can be adjusted by the parameters of H-shaped cells flexibly. In addition, the spiral-shaped DGS for CPW is firstly introduced to realize band-stop response on both side of the former passband in the SSPPs structure, and the high selectivity (Δf3 dB/Δf20 dB = 0.91) wideband passband filter can be achieved due to the transmission zeros nearby. Both simulation and measurement results have demonstrated the excellent filtering performance for the wideband bandpass filter with the 3-dB bandwidths 68% and wide upper stopband rejection (2.62f0). The proposed novel non-periodic SSPPs and filter provide application potentials to advanced plasmonic functional devices and integrated circuits in both microwave and terahertz frequencies.
References
Maier, S. A. Plasmonics: Fundamentals and Applications (Springer 2007).
Barnes, W. L., Dereux, A. & Ebbesen, T. W. Surface plasmon subwavelength optics. Nature 424(6950), 824–830 (2003).
Pendry, J. B., Martin-Moreno, L. & Garcia-Vidal, F. J. Mimicking surface plasmons with structured surfaces. Science 305(5685), 847–848 (2004).
Maier, S. A., Andrews, S. R., Martin-Moreno, L. & Garcia-Vidal, F. Terahertz surface plasmon-polariton propagation and focusing on periodically corrugated metal wires. Phys. Rev. Lett. 97(17), 176805 (2006).
Jiang, T. et al. Realization of tightly confined channel plasmon polaritons at low frequencies. Appl. Phys. Lett. 99(26), 261103 (2011).
Shen, X., Cui, T. J., Martin-Cano, D. & Garcia-Vidal, F. J. Conformal surface plasmons propagating on ultrathin and flexible films. Proc. Nat.l Acad. Sci. 110(1), 40–45 (2013).
Ma, H. F., Shen, X., Cheng, Q., Jiang, W. X. & Cui, T. J. Broadband and high-efficiency conversion from guided waves to spoof surface plasmon polaritons. Laser Photonics Rev. 8(1), 146–151 (2014).
Pan, B. C., Liao, Z., Zhao, J. & Cui, T. J. Controlling rejections of spoof surface plasmon polaritons using metamaterial particles. Opt. Exp. 22(11), 13940–13950 (2014).
Liu, L. et al. Multi-channel composite spoof surface plasmon polaritons propagating along periodically corrugated metallic thin films. J. Appl. Phys. 116(1), 013501 (2014).
Xu, B. et al. Tunable band-notched coplanar waveguide based on localized spoof surface plasmons. Opt. Lett. 40(20), 4683–4686 (2015).
Yin, J. Y., Ren, J., Zhang, H. C., Zhang, Q. & Cui, T. J. Capacitive-coupled series spoof surface plasmon polaritons. Sci. Rep. 6, 24605 (2016).
Liao, Z., Zhao, J., Pan, B. C., Shen, X. P. & Cui, T. J. Broadband transition between microstrip line and conformal surface plasmon waveguide. J. Phys. D: Appl. Phys. 47(31), 315103 (2014).
Liu, L. et al. Dual-band trapping of spoof surface plasmon polaritons and negative group velocity realization through microstrip line with gradient holes. Appl. Phys. Lett. 107(20), 201602 (2015).
Liu, L. et al. Fishbone-like high-efficiency low-pass plasmonic filter based on double-layered conformal surface plasmons. Plasmonics. 12(2), 439–444 (2017).
Zhou, Y. J. & Yang, B. J. A 4-way wavelength demultiplexer based on the plasmonic broadband slow wave system. Opt. Exp. 22(18), 21589–21599 (2014).
Gao, X., Zhou, L., Liao, Z., Ma, H. F. & Cui, T. J. An ultra-wideband surface plasmonic filter in microwave frequency. Appl. Phys. Lett. 104(19), 191603 (2014).
Gao, X., Zhou, L. & Cui, T. J. Odd-mode surface plasmon polaritons supported by complementary plasmonic metamaterial. Sci. Rep. 5, 9250 (2015).
Wu, Y. L., Zhuang, Z., Deng, L. & Liu, Y. A. Three-dimensional multiway power dividers based on transformation optics. Sci. Rep. 6, 24495 (2016).
Yang, W., Che, W., Jin, H., Feng, W. & Xue, Q. A polarization-reconfigurable dipole antenna using polarization rotation AMCstructure. IEEE Trans. Antennas Propag. 63(12), 5305–5315 (2015).
Feng, W., Gao, X., Che, W., Yang, W. & Xue, Q. LTCC wideband bandpass filters with high performance using coupled lines with open/shorted stubs. IEEE Trans. Compon. Packag. Manuf. Technol. 7(4), 602–609 (2017).
Wu, Y., Chen, Y., Jiao, L., Liu, Y. & Ghassemlooy, Z. Dual-band dual-mode substrate integrated waveguide filters with independently reconfigurable TE101 resonant mode. Sci. Rep. 6, 31922 (2016).
Zhang, Q., Zhang, H. C., Wu, H. & Cui, T. J. A hybrid circuit for spoof surface plasmons and spatial waveguide modes to reach controllable band-pass filters. Sci. Rep. 5, 16531 (2015).
Yin, J. Y., Ren, J., Zhang, H. C., Pan, B. C. & Cui, T. J. Broadband frequency-selective spoof surface plasmon polaritons on ultrathin metallic structure. Sci. Rep. 5, 8165 (2015).
Zhao, L. et al. A novel broadband band-pass filter based on spoof surface plasmon polaritons. Sci. Rep. 6, 36069 (2016).
Xu, J. et al. Transmission-spectrum-controllable spoof surface plasmon polaritons using tunable metamaterial particles. Appl. Phys. Lett. 108(19), 191906 (2016).
Yang, L., Zhou, Y. J., Zhang, C. & Xiao, Q. X. Compact wideband plasmonic filter with fat-top transmission response based on corrugated metal-insulator-metal ring resonator. Sci. Rep. 7, 14237 (2017).
Zhou, Y. J., Yang, B. J. & Yang, X. X. A directional coupler based on Spoof MIM plasmonic structures. In Proc. IEEE AP-S. Int. Symp. 354–355 (2014, July).
Liu, X. et al. Planar surface plasmonic waveguide devices based on symmetric corrugated thin film structures. Opt. Exp. 22(17), 20107–20116 (2014).
Gao, X. et al. Ultra-wideband surface plasmonic Y-splitter. Opt. Exp. 23(18), 23270–23277 (2015).
Wu, Y. et al. Single-conductor co-planar quasi-symmetry unequal power divider based on spoof surface plasmon polaritons of bow-tie cells. AIP Advances 6(10), 105110 (2016).
Xu, J. J., Zhang, H. C., Zhang, Q. & Cui, T. J. Efficient conversion of surface-plasmon-like modes to spatial radiated modes. Appl. Phys. Lett. 106(2), 021102 (2015).
Kianinejad, A., Chen, Z. N., Zhang, L., Liu, W. & Qiu, C. W. Spoof plasmon-based slow-wave excitation of dielectric resonator antennas. IEEE Trans. Antennas Propag. 64(6), 2094–2099 (2016).
Kianinejad, A., Chen, Z. N. & Qiu, C. W. A single-layered spoof-plasmon-mode leaky wave antenna with consistent gain. IEEE Trans. Antennas Propag. 65(2), 681–687 (2017).
Lim, J. S., Kim, C. S., Lee, Y. T., Ahn, D. & Nam, S. A spiral-shaped defected ground structure for coplanar waveguide. IEEE Microw. Wireless Compon. Lett. 12(9), 330–332 (2002).
Acknowledgements
This work was supported by the National Natural Science Foundation of China (61401206, 61571231, 61627802), “Qing Lan Project” of Jiangsu Province (2017–2020) and the Open Funding of State Key Laboratory of Millimeter Waves (K201804).
Author information
Authors and Affiliations
Contributions
W.Q.C. and X.G. provided the initial idea, W.J.F. refined the idea. X.G. is responsible for structure construction, the simulations and the measurements, and then wrote the manuscript. W.J.F. did theoretical analysis. All authors contributed to the article.
Corresponding authors
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Gao, X., Che, W. & Feng, W. Novel non-periodic spoof surface plasmon polaritons with H-shaped cells and its application to high selectivity wideband bandpass filter. Sci Rep 8, 2456 (2018). https://doi.org/10.1038/s41598-018-20533-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-018-20533-8
- Springer Nature Limited