Abstract
A polarization independent holographic beam splitter that generates equal-intensity beams based on geometric metasurface is demonstrated. Although conventional geometric metasurfaces have the advantages of working over a broad frequency range and having intuitive design principles, geometric metasurfaces have the limitation that they only work for circular polarization. In this work, Fourier holography is used to overcome this limitation. A perfect overlap resulting from the origin-symmetry of the encoded image enables polarization independent operation of geometric metasurfaces. The designed metasurface beam splitter is experimentally demonstrated by using hydrogenated amorphous silicon, and the device performs consistent beam splitting regardless of incident polarizations as well as wavelengths. Our device can be applied to generate equal-intensity beams for entangled photon light sources in quantum optics, and the design approach provides a way to develop ultra-thin broadband polarization independent components for modern optics.
Similar content being viewed by others
Introduction
Metasurfaces composed of miniaturized antenna arrays provide an approach to flat optics that uses ultrathin optical components instead of conventional bulky components. A primary challenge of metasurfaces is to design a system that converts a certain incident optical wave to a desired output, and most effort focuses on wave-front manipulation due to its versatile applications such as beam steering devices1,2, achromatic lenses3,4,5,6, optical skin cloaks7, holographic devices8,9,10,11, and others12,13,14,15. In addition, the light controllability of metasurfaces can be further improved by combining them with dynamically-tunable mechanisms16,17,18,19,20,21 or nonlinear optical effects22,23,24,25.
Most metasurfaces operate for linearly or circularly polarized light. The antenna design principle for the linear polarization relies on resonance tuning of each antenna by controlling its physical shape. V-shaped and elliptical antennas can be used for this purpose1,26. The polarization-dependence can be removed by using a circular antenna rather than the elliptical one27,28,29. Circular antennas can operate for any kind of polarization, but they are highly resonant, so metasurfaces composed of circular antennas have only narrow working frequencies. Geometric metasurfaces (GEMs) that operate for the circular polarization have a broad range of working frequency because they generate phase delay by rotating the antennas, which is less resonant than the resonance tuning method. If we consider each rotating antenna as a one-dimensional dipole oscillator, the rotation angles of the antennas impart an initial phase difference to outgoing circularly polarized light. The outgoing wave from the GEM can be decomposed into co-polarized and cross-polarized light. Co-polarized beam retains its original phase distribution, so the propagation of the co-polarized beam does not change, i.e. it produces a zeroth-order beam. Only the cross-polarized beam follows the phase distribution of the metasurface. GEMs have an intuitive design principle so that we can easily determine phase variance by choosing an appropriate rotation angle for each antenna.
A beam splitter is an optical component that can divide one incident light into several beams, and there are many ways to realize such component. Typically, we can make cube-shaped beam splitters by attaching two trigonal prisms, and its functionality can be controlled by changing properties of the interface. In contrast to the conventional beam splitters, metasurfaces can serve similar functions with ultra-thin thickness by managing specific designs of metasurfaces. Typical metasurface beam splitters have a linear phase distribution consist of unit structures which cause opposite phase variation for orthogonal linear or circular polarizations30,31,32,33,34. Therefore, incident beam can be separated after passing through the metasurface as in typical Wollaston prisms. In this case, power ratio of diffracted beams is not identical, i.e. it depends on the incident polarization state. The Rochon prism which leaves ordinary ray undeviated can also be realized by controlling both propagation and geometric phase of each unit structure35, but its working frequency is strictly limited to a narrow band.
In modern optics such as quantum communication, equal-intensity coherent beams are usually required to generate entangled photon light sources36,37,38,39. Some of related works on metasurfaces to generate equal-intensity beams at NIR wavelengths regardless of incident polarization are reported40,41, but their working frequencies are limited to NIR region. In addition, the number of generated beams is not controllable, i.e. they always generate two diffracted beams. By attaching two equivalent metasurfaces with opposite linear phase gradient, equal-intensity beams can also be generated42. However, its functionality is highly affected by alignment of light source and the metasurface.
Here we propose and experimentally demonstrate GEM-based holographic beam splitter that always generates equal-intensity beams regardless of incident polarization at visible wavelengths. In principle, the number of generated beams which have equal-intensity from our device is controllable. Our device achieves both broadband characteristics and the polarization-independence by using Fourier holography on GEMs. The term of ‘broadband’ in this work does not mean consistent efficiency. Instead, it means that our device functionality can be maintained in a certain wavelength range because phase distribution of our metasurface does not change by incident wavelengths. We notice that a reversed conjugate image of Fourier hologram appears at the same image plane as the original image43. If the original image has origin-symmetry, the original and conjugate images can overlap exactly. Right circular polarization (RCP) and left circular polarization (LCP) generate the conjugate images each other from GEMs encoded by Fourier hologram, so we can realize GEMs that produce exactly the same outputs in any kind of polarization states by encoding an origin-symmetric image. The proposed device is experimentally demonstrated using hydrogenated amorphous silicon (a-Si:H), and diffracted beam power of the outgoing optical wave is symmetric regardless of polarization. The efficiency of our device can be further improved by using low loss materials in visible region such as crystalline silicon (c-Si)44,45,46, titanium dioxide (TiO2)47,48 and gallium nitride (GaN)49,50,51 without changing our fundamental design principle. Our device and design approach can be applied to interferometry in classical optics as well as generation of entangled photon light sources in quantum optics.
Results
Our device belongs to the GEM; nevertheless, it exhibits consistent functionality regardless of the incident polarization (Fig. 1a,b). Conventional beam splitters based on the GEM has been designed by linear phase gradient which leads to separation depending on the circular polarization direction31,32,34. Rotating antennas of GEMs generate opposite phase delays against a pair of orthogonal circular polarizations, i.e. RCP and LCP, so the optical response of the conventional GEM varies depending on the incident polarizations. Therefore, the power ratio between diffraction beams varies depending on the incident polarization states. To remove the polarization-dependence, Fourier holography is employed to exploit the conjugate functionality of RCP and LCP. The conjugate image of Fourier hologram appears in reverse at the same position as the original image. Nanoantennas based on the geometric phase generate opposite phase variation against RCP and LCP. When circularly polarized plane wave is incident to the GEM, complex amplitudes of transmitted cross-polarized light which are RCP and LCP immediately after the metasurface are given by
where x and y represent the coordinate of the metasurface. A(x, y) is the amplitude of the transmitted cross-polarized light, and ϕ(x, y) indicates the phase distribution of the metasurface. Amplitude variation by the metasurface can be ignored because all the nanoantennas in it are designed to induce the same amplitude change. The only difference between the complex amplitude of RCP and LCP is the sign of the imaginary part, so they have a conjugate relation as
Intensity distributions at the image plane can be expressed as
where x′ and y′ indicate the coordinate at the image plane, and F{∙} denotes the two-dimensional Fourier transformation operator. The conjugate symmetry of the Fourier transformation yields
Finally, the intensity distributions of RCP and LCP are related as
Therefore, if the encoded image is origin-symmetric, the generated images by RCP and LCP exactly overlap each other.
The origin-symmetric image of two white spots with a black background is encoded in our metasurface based on computer-generated phase-only Fourier holography (Fig. 1c). The original image has a size of 800 × 200 pixels, which is expanded to 1250 × 1250 pixels by using zero padding to increase the image fidelity. We use the Gerchberg-Saxton (GS) algorithm52 to derive a desired phase distribution from the enlarged image by two hundred iterative processes combined with the initial random phase mask. The random phase mask is employed to the original image for easy convergence of the algorithm. It is usually attached to the object image to spread the energy over a wide spectrum to ignore the amplitude of a complex Fourier hologram53. Otherwise, most of the energy concentrates in the zeroth order beam and the effective dynamic range is reduced. The Fourier hologram can be represented in the complex form of H(x, y) = A(x, y)exp[−jφ(x, y)]. If we can ignore the amplitude A(x, y), a gray-tone image can be generated by controlling φ(x, y) only, which refers to the phase-only hologram. The derived phase distribution is discretized into eight uniform phase steps from 0 to 2π. The arrangement of the metasurface elements according to the hologram corresponds to the discrete phase distribution from the GS algorithm. Eight uniform phase steps match eight uniform rotation steps of nanoantennas from 0 to π in our metasurface.
The phase profile of our metasurface is not equivalent of two diffraction grating placed next to each other. The phase profile retrieved from the GS algorithm is not origin symmetric because the random phase mask is attached to the original origin symmetric image of two spots. The value of each pixel of the image with the random phase mask becomes complex number which is no more origin symmetric. The phase profile of our metasurface looks linear, but one can easily notice that it is not exactly linear (Supplementary Fig. S1). Orientation of the nanorods varies not only horizontally, but also vertically. The vertical variation results from the GS algorithm with the random phase mask. If our device has origin symmetric phase profile, the orientation of the nanorods should not be changed in vertical direction.
The Fourier hologram uses a Fourier-transformed image to encode the hologram, so the outgoing optical wave from the hologram should be Fourier transformed again to recover the original image. A convenient way to conduct Fourier transformation of optical waves is to let the wave propagate to an infinitely-distant plane; this process works the same as a thin optical lens. Although an infinitely-distant plane does not exist in the real world, our metasurface is small enough, i.e. 300 μm × 300 μm, so an image plane a few centimeters away from the metasurface can be regarded as infinitely distant without causing significant error. The generated holographic image only experiences magnification without change of overall configuration along the distance from the hologram consistently maintaining two circular spots; hence, it works as a beam splitter generating equal-intensity beams.
The most attractive advantage of our device is that it can generate two or more equal-intensity beams simply by changing the encoded image. In this work, we use two point image with origin symmetry for the hologram encoding. If we use four point image with origin symmetry, we can obtain four equal-intensity beams. Theoretically, any even numbers of equal-intensity beams are possible while odd numbers are impossible due to the origin symmetry condition. The metasurface beam splitters based on one dimensional binary phase profile can also increase the number of beams by arranging two dimensional binary phase profile, but controllability is not as high as our approach because our device can use eight or more phase steps.
The a-Si:H as structuring material for our metasurface achieves a broadband functionality in visible wavelengths (Fig. 2a,b). The a-Si:H refers to amorphous silicon which has hydrogen impurities. The impurities decrease the defect density of amorphous silicon, so a-Si:H has a much lower extinction coefficient than typical amorphous silicon in visible wavelengths54 (Fig. 2c). We also calculate the cross-polarization transmittance (CPT) of the unit cell made of the a-Si:H (Fig. 2d). The CPT is defined as the ratio of the power of the transmitted cross-polarized light to the total incident optical power, and the calculated CPT reaches up to 50% at the wavelength λ = 550 nm. The size and pitch of nanoantennas are determined based on the calculated CPT. The conversion efficiency increases as the CPT increases, so they are designed to maximize the CPT minimizing the reflectance (Supplementary Fig. S2). If we exploit other materials such as c-Si, TiO2 and GaN whose extinction coefficient is lower than a-Si:H, the CPT of the metasurface can be further improved.
The fabricated metasurface shows the consistent beam-splitting regardless of the incident polarizations (Fig. 3). The diffraction angle increases as incident λ increases, but is not affected by the incident polarization. The powers of diffracted beams are characterized by diffraction orders, incident polarizations and wavelengths. As a result, the power of each diffraction order of m = +1 and m = −1 is always equal for RCP and LCP as well as wavelengths. Arbitrary polarization states can be decomposed into the combination of RCP and LCP, so our device functionality is valid for the arbitrary polarization states. The normalized intensity difference is originated from the instability of the laser power; nevertheless, measured values by each polarization can be supposed to be equal within the error range. Total efficiency which is defined by the ratio of the sum of diffraction beam powers (m = +1, −1) to the incident beam power is 18.3% at λ = 532 nm and 9.1% at λ = 635 nm. This difference agrees with the fact that the CPT is higher at λ = 532 nm than at λ = 635 nm wavelength. Diffraction efficiency which is defined by the ratio of the sum of diffraction beam powers to the total transmitted beam power at λ = 532 nm is 10 times higher than at λ = 635 nm. The difference of the diffraction efficiency mainly comes from the incident beam size and shape. In the case of 635 nm, we use a laser diode which has elliptical beam shape (Fig. 4). If we use this source to cover the square shaped metasurface, considerable amount of incident light does not pass the metasurface resulting diffraction efficiency decrease. It causes the difference as well as the discrepancy with the simulation. However, it does not affect our device functionality because our device still generates same powered diffraction beams.
The intensity distributions of each diffracted beam are also measured using a charge-coupled device (CCD) (Fig. 4). Regarding of the saturation, a power meter is used to measure the beam powers while the CCD is used to capture the intensity profiles. The CCD is saturated to clearly show the beam profiles and sizes, but the power meter is not saturated because the incident beam power is less than the measurement limit of the power meter. Optical power is limited to a certain boundary, but randomly distributed due to the appearance of laser speckles. The strong coherence of the laser source causes the speckles, and this disturbance can be reduced using a diffuser48 or Dammann grating9,55.
The broadband polarization independent beam splitting can be realized by using circular pillar based metasurfaces which does not belong to the GEM56. However, our approach as a GEM has advantages of robustness to the fabrication error as well as intuitive design process to achieve broadband functionality. Phase variation from the circular pillar based metasurfaces is strongly affected by the size of structures which always has discrepancy with the design due to the perturbation in fabrication conditions. In contrast, phase variation from the GEM is determined by the orientation of the nanorods which is less sensitive to the fabrication error. This is a general advantage of GEMs. In addition, by using GEM we can achieve broadband characteristics without any further algorithm.
In summary, we investigate and experimentally demonstrate a holographic beam splitter that generates equal-intensity beams with incidence of any polarization at visible wavelengths. In contrast to conventional metasurface beam splitters of linear phase gradient, Fourier holography is exploited to maintain the consistent functionality for incident polarization. A perfect overlap of an original and a conjugate image of Fourier hologram is a key concept of our device principle. Theoretically, the number of the generated beams can be controlled by replacing the two point image into others, e.g. four point and eight point images. The fabricated metasurface based on a-Si:H performs consistent beam splitting regardless of incident polarizations as well as wavelengths, and the efficiency can be improved by using low loss materials. Our device can be exploited to generate two or more entangled photon light sources in quantum optics, and design approach provides a platform for broadband polarization independent optical components of modern optics.
Methods
Sample Fabrication
Plasma-enhanced chemical vapor deposition (HiDep-SC, BMR Technology) was used for deposition of 300-nm-thick a-Si:H thin film on a fused silica substrate. Deposition rate was 1.3 nm/s under the temperature of 300 °C with 10 sccm flow rate of SiH4 gas and 75 sccm flow rate of H2 gas. A chromium (Cr) hard mask was defined on the a-Si:H by using conventional electron beam lithography (ELS-7800, Elionix) with electron beam evaporation (KVE-E4000, Korea Vacuum Tech). Inductively-coupled plasma reactive ion etching was employed to etch the a-Si:H film along the Cr mask. 80 sccm flow rate of Cl2 gas and 120 sccm flow rate of HBr gas were used as etching gas resulting the etching speed of 4 nm/s. The remaining mask was removed using Cr etchant.
Material Characterization
The a-Si:H thin film was characterized using ellipsometry (M-2000, J.A. Woollam). The incident beam angle was 65°. The Tauc-Lorentz model developed by Jellison and Modine was employed because this model generally works well with the absorptive amorphous material57. The imaginary part of the dielectric function of the Tauc-Lorentz model is given by
where A is the strength of the absorption peak, B is the broadening term, E0 is the energy position of the absorption peak, and E G is the optical band gap energy. The fitting parameters for our material were A = 93.974 eV, B = 2.339 eV, E0 = 4.128 eV, and E G = 1.271 eV. The mean square error between the fitting curve and the measured data was 11.123.
References
Yu, N. et al. Light propagation with phase discontinuities: generalized laws of reflection and refraction. Science 334, 333–337 (2011).
Huang, L. et al. Dispersionless phase discontinuities for controlling light propagation. Nano Lett. 12, 5750–5755 (2012).
Aieta, F., Kats, M. A., Genevet, P. & Capasso, F. Multiwavelength achromatic metasurfaces by dispersive phase compensation. Science 347, 1342–1345 (2015).
Wang, S. et al. Broadband achromatic optical metasurface devices. Nat. Commun. 8, 187 (2017).
Khorasaninejad, M. et al. Achromatic metalens over 60 nm bandwidth in the visible and metalens with reverse chromatic dispersion. Nano Lett. 17, 1819–1824 (2017).
Chen, W. T. et al. A broadband achromatic metalens for focusing and imaging in the visible. Nat. Nanotech. 13, 220–226 (2018).
Ni, X., Wong, Z. J., Mrejen, M., Wang, Y. & Zhang, X. An ultrathin invisibility skin cloak for visible light. Science 349, 1310–1314 (2015).
Huang, L. et al. Three-dimensional optical holography using a plasmonic metasurface. Nat. Commun. 4, 2808 (2013).
Zheng, G. et al. Metasurface holograms reaching 80% efficiency. Nat. Nanotech. 10, 308–312 (2015).
Balthasar Mueller, J. P., Rubin, N. A., Devlin, R. C., Groever, B. & Capasso, F. Metasurface polarization optics: independent phase control of arbitrary orthogonal states of polarization. Phys. Rev. Lett. 118, 113901 (2017).
Li, Z. et al. Dielectric meta-holograms enabled with dual magnetic resonances in visible light. ACS Nano 11, 9382–9389 (2017).
Cai, T., Wang, G.-M., Xu, H.-X., Tang, S.-W. & Liang, J.-G. Polarization-independent broadband meta-surface for bifunctional antenna. Opt. Express 24, 22606 (2016).
Babocký, J. et al. Quantitative 3D phase imaging of plasmonic metasurfaces. ACS Photonics 4, 1389–1397 (2017).
Liu, Z. et al. Single-layer plasmonic metasurface half-wave plates with wavelength-independent polarization conversion angle. ACS Photonics 4, 2061–2069 (2017).
Arbabi, A., Arbabi, E., Horie, Y., Kamali, S. M. & Faraon, A. Planar metasurface retroreflector. Nat. Photon. 11, 415–420 (2017).
Yao, Y. et al. Electrically tunable metasurface perfect absorbers for ultrathin mid-infrared optical modulators. Nano Lett. 14, 6526–6532 (2014).
Borisenko, K. B. et al. Photo-induced optical activity in phase-change memory materials. Sci. Rep. 5, (2015).
Ee, H.-S. & Agarwal, R. Tunable metasurface and flat optical zoom lens on a stretchable substrate. Nano Lett. 16, 2818–2823 (2016).
Zhu, H., Yi, F. & Cubukcu, E. Plasmonic metamaterial absorber for broadband manipulation of mechanical resonances. Nat. Photon. 10, 709–714 (2016).
Duan, X., Kamin, S. & Liu, N. Dynamic plasmonic colour display. Nat. Commun. 8, 14606 (2017).
Makarov, S. V. et al. Light-induced tuning and reconfiguration of nanophotonic structures: light-induced tuning and reconfiguration of nanophotonic structures. Laser Photonics Rev. 11, 1700108 (2017).
Li, G. et al. Continuous control of the nonlinearity phase for harmonic generations. Nat. Mater. 14, 607–612 (2015).
Almeida, E., Bitton, O. & Prior, Y. Nonlinear metamaterials for holography. Nat. Commun. 7, 12533 (2016).
Ye, W. et al. Spin and wavelength multiplexed nonlinear metasurface holography. Nat. Commun. 7, 11930 (2016).
Walter, F., Li, G., Meier, C., Zhang, S. & Zentgraf, T. Ultrathin nonlinear metasurface for optical image encoding. Nano Lett. 17, 3171–3175 (2017).
Arbabi, A., Horie, Y., Bagheri, M. & Faraon, A. Dielectric metasurfaces for complete control of phase and polarization with subwavelength spatial resolution and high transmission. Nat. Nanotech. 10, 937–943 (2015).
Yu, Y. F. et al. High-transmission dielectric metasurface with 2π phase control at visible wavelengths: high-transmission dielectric metasurface with 2π phase control at visible wavelengths. Laser Photonics Rev. 9, 412–418 (2015).
Chong, K. E. et al. Efficient polarization-insensitive complex wavefront control using Huygens’ metasurfaces based on dielectric resonant meta-atoms. ACS Photonics 3, 514–519 (2016).
Yoon, G., Lee, D., Nam, K. T. & Rho, J. Pragmatic metasurface hologram at visible wavelength: the balance between diffraction efficiency and fabrication compatibility. ACS Photonics 5, 1643–1647 (2018).
Farmahini-Farahani, M. & Mosallaei, H. Birefringent reflectarray metasurface for beam engineering in infrared. Opt. Lett. 38, 462 (2013).
Khorasaninejad, M. & Crozier, K. B. Silicon nanofin grating as a miniature chirality-distinguishing beam-splitter. Nat. Commun. 5, 5386 (2014).
Liu, C. et al. Fully controllable Pancharatnam-Berry metasurface array with high conversion efficiency and broad bandwidth. Sci. Rep. 6, (2016).
Guo, Z., Zhu, L., Shen, F., Zhou, H. & Gao, R. Dielectric metasurface based high-efficiency polarization splitters. RSC Adv. 7, 9872–9879 (2017).
Lee, W. S. L. et al. Broadband terahertz circular-polarization beam splitter. Adv. Opt. Mater. 6, 1700852 (2018).
Wang, B. et al. Rochon-prism-like planar circularly polarized beam splitters based on dielectric metasurfaces. ACS Photonics 5, 1660–1664 (2018).
Bouwmeester, D. et al. Experimental quantum teleportation. Nature 390, 5 (1997).
Duan, L.-M., Lukin, M. D., Cirac, J. I. & Zoller, P. Long-distance quantum communication with atomic ensembles and linear optics. Nature 414, 413–418 (2001).
O’Brien, J. L., Pryde, G. J., White, A. G., Ralph, T. C. & Branning, D. Demonstration of an all-optical quantum controlled-not gate. Nature 426, 264–267 (2003).
Ursin, R. et al. Entanglement-based quantum communication over 144 km. Nat. Phys. 3, 481–486 (2007).
Wang, Z.-H., Jiang, S.-C., Xiong, X., Peng, R.-W. & Wang, M. Generation of equal-intensity coherent optical beams by binary geometrical phase on metasurface. Appl. Phys. Lett. 108, 261107 (2016).
Zhang, D. et al. Nanoscale beam splitters based on gradient metasurfaces. Opt. Lett. 43, 267 (2018).
Wei, M. et al. Broadband non-polarizing terahertz beam splitters with variable split ratio. Appl. Phys. Lett. 111, 071101 (2017).
Goodman, J. W. Introduction to Fourier Optics. (Roberts and Company Publishers, 2005).
Sell, D., Yang, J., Doshay, S., Zhang, K. & Fan, J. A. Visible light metasurfaces based on single-crystal silicon. ACS Photonics 3, 1919–1925 (2016).
Zhou, Z. et al. Efficient silicon metasurfaces for visible light. ACS Photonics 4, 544–551 (2017).
Martins, A. et al. Highly efficient holograms based on c-Si metasurfaces in the visible range. Opt. Express 26, 9573 (2018).
Devlin, R. C., Khorasaninejad, M., Chen, W. T., Oh, J. & Capasso, F. Broadband high-efficiency dielectric metasurfaces for the visible spectrum. Proc. Natl. Acad. Sci. USA 113, 10473–10478 (2016).
Khorasaninejad, M. et al. Metalenses at visible wavelengths: diffraction-limited focusing and subwavelength resolution imaging. Science 352, 1190–1194 (2016).
Chen, B. H. et al. GaN metalens for pixel-level full-color routing at visible light. Nano Lett. 17, 6345–6352 (2017).
Emani, N. K. et al. High-efficiency and low-loss gallium nitride dielectric metasurfaces for nanophotonics at visible wavelengths. Appl. Phys. Lett. 111, 221101 (2017).
Wang, S. et al. A broadband achromatic metalens in the visible. Nat. Nanotech. 13, 227–232 (2018).
Gerchberg, R. W. & Saxton, W. O. A practical algorithm for the determination of the phase from image and diffraction plane pictures. Optik 35, 237–246 (1972).
Poon, T.-C. & Liu, J.-P. Introduction to modern digital holography: with MATLAB. (Cambridge University Press, 2014).
Park, C.-S. et al. Structural color filters enabled by a dielectric metasurface incorporating hydrogenated amorphous silicon nanodisks. Sci. Rep. 7, (2017).
Dammann, H. & Görtler, K. High-efficiency in-line multiple imaging by means of multiple phase holograms. Opt. Commun. 3, 312–315 (1971).
Byrnes, S. J., Lenef, A., Aieta, F. & Capasso, F. Designing large, high-efficiency, high-numerical-aperture, transmissive meta-lenses for visible light. Opt. Express 24, 5110 (2016).
Jellison, G. E. & Modine, F. A. Parameterization of the optical functions of amorphous materials in the interband region. Appl. Phys. Lett. 69, 371–373 (1996).
Pierce, D. T. & Spicer, W. E. Electronic structure of amorphous Si from photoemission and optical studies. Phys. Rev. B 5, 3017–3029 (1972).
Acknowledgements
This work is financially supported by the National Research Foundation grants (NRF-2017R1E1A1A03070501, NRF-2015R1A5A1037668, CAMM-2014M3A6B3063708, NRF-2017R1E1A2A01076613) funded by the Ministry of Science and ICT (MSIT), Republic of Korea.
Author information
Authors and Affiliations
Contributions
G.Y. and J.R. conceived the idea and initiated the project. G.Y. designed and fabricated the devices. G.Y. and D.L. did optical experiments. K.T.N. provided the materials characterization. G.Y. and J.R. wrote the manuscript. All authors confirmed the final manuscript. J.R. guided the entire project.
Corresponding author
Ethics declarations
Competing Interests
The authors declare no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Yoon, G., Lee, D., Nam, K.T. et al. Geometric metasurface enabling polarization independent beam splitting. Sci Rep 8, 9468 (2018). https://doi.org/10.1038/s41598-018-27876-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-018-27876-2
- Springer Nature Limited
This article is cited by
-
Reconfigurable phase-change metasurfaces from efficient wavefront manipulation to perfect absorption
Journal of Materials Science (2022)
-
Nanoimprint lithography for high-throughput fabrication of metasurfaces
Frontiers of Optoelectronics (2021)
-
Top-down nanofabrication approaches toward single-digit-nanometer scale structures
Journal of Mechanical Science and Technology (2021)
-
Wavelength-decoupled geometric metasurfaces by arbitrary dispersion control
Communications Physics (2019)
-
A broadband achromatic polarization-insensitive metalens consisting of anisotropic nanostructures
Nature Communications (2019)