Abstract
Streptococcus mutans SpaP mediates the binding of this cariogenic bacteria to tooth surfaces. It was reported that the SpaP of S. mutans clinical isolates could be classified to 2 genotypes, type A and B. Our aims are to examine spaP genotypes in often-used S. mutans laboratory strains as well as clinical isolates and to explore the relationship between the genotypes of S. mutans strains and their adherence to salivary-agglutinin (SAG). The sequences of SpaP of 11 S. mutans strains were analyzed with alignment tools. Out of these strains, 9 strains were examined for their adherence to SAG-coated surfaces. The SpaP expression on the cell surfaces and in the spent media of 9 strains were examined by a dot-blot assay. Based on the alignment of the variable V region of SpaP, 9 strains were classified as previously-defined type-A and 3 strains type-B. Among type-B strains, the SpaPs of GS5 and HG723 contain a premature stop codon which resulted in loss of adherence and absence of SpaP expression on the cell surfaces. However, clear SpaP expression was observed in the spent media of both strains. The type-B strain UA159 demonstrated low SpaP expression on the cell surface, but it showed similar adherence ability as the type-A strains. In conclusion, the presence of SpaP on the cell surface determines the adherence of S. mutans to SAG. No difference in SAG-mediated adherence could be seen between type A and B strains, probably due to the limited number of type B strain tested.
Similar content being viewed by others
Introduction
Streptococcus mutans has been recognized as the principal bacterial agent of dental caries1. Next to its acidogenic potential, its ability to adhere to teeth and form a biofilm contributes to its cariogenicity2. One crucial adhesion and colonization factor of S. mutans is a conserved sucrose-independent adhesin, SpaP3,4. SpaP is also named P1, Antigen I/II or Pac3. It mediates the adherence of S. mutans to the saliva-coated tooth surface by interacting specifically with a salivary component, salivary agglutinin (SAG)5. SAG, also known as glycoprotein-340 (gp 340) or SALSA, is encoded by the gene Deleted in Malignant Brain Tumours 1 (DMBT1)6. The protein is characterized by multiple scavenger receptor cysteine rich (SRCR) domains separated by scavenger interspersed domains with potential O-glycosylation sites. SpaP recognizes conserved peptide sequences of the SRCR domain and possibly carbohydrates3,7,8.
Previous studies on the structure of the S. mutans SpaP protein revealed that this protein comprises a leader peptide (aa residues 1–38) adjacent to a series of alanine-rich (A) repeats (aa residues 186–464), a variable (V) region (aa residues 465–839), a series of proline-rich (P) repeats (aa residues 840–963) and an LPXTG cell-wall anchor motif 9. Larson et al.10 reported the crystal structure of the A3VP1 (a stalk-like structure formed by the third A region repeat and the first P region repeat while presenting a V region head) fragment of S. mutans SpaP representing a functional structure for adherence. Due to the critical role of SpaP in the SAG-mediated S. mutans adherence, this protein has become a promising candidate for developing protective immunization strategies against Streptococcus infection3.
SpaP is widely distributed throughout the streptococci. Although the orthologous proteins generally have a conserved primary structure with 70–90% sequence similarity3, the function of the protein can vary in different streptococci4,11. This variation is possibly caused by the multi-functional nature of the SpaP protein family. The SpaP protein consists not only of the binding site for SAG, but also sites with affinities for fibronectin, collagen and other bacterial species like P. gingivalis3. Hence, the combination of functions of SpaP can be different in different streptococci11.
However, the sequences of S. mutans SpaPs are highly conserved with around 90% sequence similarity12. It is believed that the variable V-region determines the diversity of SpaP among S. mutans strains. Recent studies reported that S. mutans SpaPs can be grouped into two types (A and B) based on the variable V-region segments12,13. S. mutans strains with SpaP type B showed a much stronger binding to SAG than those with type-A13 and the presence of the type-B strains could be associated with an increase in caries over a 5-year period12.
Until now, laboratory strains of S. mutans have been used to examine the function of SpaP14, while their spaP genotypes were unknown. In order to better understand the involvement of SpaP in the virulence of S. mutans, it is important to know the spaP genotypes of both well-known laboratory strains and clinical isolates. Hence, the aims of our study are to examine the spaP genotypes in the known S. mutans laboratory strains as well as our own clinical isolates and to explore the relationship between the genotypes and S. mutans adherence to SAG-coated surfaces.
Results
Comparison of SpaP protein sequences among S. mutans strains
The alignment of the 11 complete protein sequences are shown in Fig. 1a). The SpaP sequences of strains HG723 and GS-5 are identical. Both terminate after 1158 amino acids: in their corresponding nucleotide acid sequences, a single base (adenine) was inserted at position 3470, which resulted in the frame shift and premature stop codon. Figure 1a) shows the corresponding region of the complete alignment. Consequently, the length of the proteins in these two strains is 1158 amino acids, much shorter than those of the other 9 S. mutans strains. Among 9 strains, the length of SpaP of strains UA159 and Nicklas Stromberg 40 is 1562, 4 amino acids shorter than that of the other 7 strains (1566). The spaP nucleotide acid sequence of strain UA159 fully matches the published spaP sequence (Gene ID: 1028055).
Since the region of A3VP1 was shown to mediate the high-affinity binding of SpaP with SAG10 and this region was used by Esberg et al.13 for SpaP genotyping, we also zoomed into the amino-acid sequences of this region (residue 385–874). Figure 1b) shows the alignment of the most variable section among the 11 S. mutans strains, and Fig. 1c) shows the phylogenetic tree, based on this section. This tree indicates that 11 S. mutans strains can be grouped into two clusters. Six S. mutans strains are grouped with the type-A strain Nicklas Stromberg 20 with 99–100% sequence similarity within the group, whereas strains UA159, GS-5 and HG723 are grouped with the type-B strain Nicklas Stromberg 40 as their sequences in this region are identical.
SAG-mediated adherence of S. mutans strains
A resazurin metabolic activity assay was used to quantify the SAG-mediated adherence of S. mutans strain. A pilot study was carried out using strains UA159 and HG723 to evaluate if the fluorescence intensity (FI) values of the resazurin assay correlate with the viable cell counts of the strains. Cultures in exponential growth phase were serially diluted, and resazurin was added to these dilutions to a final concentration of 0.0016%. Next, the FI values were recorded. For both strains (UA159, HG723), a linear relationship was found between the FI values and CFU/ml counts of each dilution with good correlations (R = 0.99, p < 0.001) (Supplementary Fig. S1).
We first compared the SAG-mediated adherence between S. mutans UA159 and its isogenic spaP knock out strain. Figure 2a) clearly shows that the knockout strain lost the ability to adhere to the SAG-coated surface, as compared to the wild-type strain. This result confirmed that our assay can be used to examine the SpaP-mediated adherence. Next, we examined the adherence of 9 strains using the same protocol. Figure 2b) demonstrates that the adherence efficiency of S. mutans strains varied. Strains V403 and NG8 displayed the highest adherence efficiency, followed by strain C180-2. The adherence efficiency of strain UA140, HG982 and C67-1 was lower than that of strain UA159. The adherence efficiency of strains HG723 and GS-5 was the lowest, only 11% and 6% of the reference strain, UA159.
Figure 2c) shows representative images of the adherence of S. mutans strains to SAG-coated coverslips. The images are obtained from the strains with high (strain NG8, V403), medium (strain UA159) and low adherence (strain HG723). Next to the amounts of adhered cells, the pattern of adherence also varied between different strains. The V403 and NG8 cells were in short chains and small aggregates, whereas UA159 cells formed relatively long chains and big aggregates.
Expression of SpaP on the surface of S. mutans cell and in the spent medium
A dot-blot assay was performed with anti-SpaP monoclonal antibodies 1-6F, 4-10A, 5-5D of which the approximate binding sites are known (Supplementary Fig. S2)15. Neither the cell surface nor the spent media of S. mutans UA159 ΔspaP and A. naeslundi cultures showed antigenicity to the monoclonal antibodies (mAbs). The cell pellets of all (tested) S. mutans strains, except HG723 and GS-5, displayed comparable reactivity with mAbs 1-6F that recognizes epitopes within the globular apical head of the molecule16 (Fig. 3). Similar to mAb 1-6F, the cell pellets of HG723 and GS-5 did not appear to be reactive to mAb 4-10A and mAb 5-5D (Fig. 3), which map to the helical stalk and the A/P interaction at the base the stalk of the molecule17. The cell pellets of strain UA159 shows low antigenicity to the mAbs. In contrast, the spent media of UA159, HG723 and GS-5 displayed a notable reactivity in the antigenicity with 1-6F, 4-10A as well as 5-5D, while the spent media of the other strains showed low antigenicity to these three antibodies.
Cell surface hydrophobicity of S. mutans
The hydrophobicity of mid-log phase cultures of S. mutans was determined using hexadecane. Strains HG723, GS-5 and UA159 were considerably less hydrophobic than the other strains (Table 1). Strain UA159 (about 14%) has the lowest hydrophobicity among all tested strains.
Discussion
S. mutans is implicated as a major etiologic agent of dental caries1. The interaction between S. mutans adhesin SpaP with SAG determines its initial adherence in the oral cavity. Recent studies indicated that S. mutans clinical isolates containing spaP type-B adhered better to a SAG-coated surface and were associated with a higher caries risk12,13. In the current study, we both analyzed the SpaP protein sequences of several known laboratory strains together with our own S. mutans clinical isolates and studied the adherence properties of these strains. Based on the sequence of A3VP1 region of SpaP, we confirmed the previous finding that S. mutans strains could be classified into two groups. However, we did not observe any association between the spaP genotype and the ability of S. mutans to adhere to SAG. In addition, we discovered that besides strain GS-5, strain HG723 also contains a premature stop codon at the C-terminal of SpaP which leads to the loss of adherence to SAG-coated surface of this strain.
In this study, we included a few S. mutans laboratory strains, such as the well-known NG8, GS-5 and UA159, because previous knowledge on the structure and functions of SpaP has mostly been obtained from these strains. In addition, these strains have been used for the development and validation of vaccines against S. mutans18,19,20. Our data clearly demonstrated that all our strains tested could indeed be classified into the two groups (type-A and type-B) based on the variable V region, which supports the classification of clinical isolates by Esberg et al.13. Actually, in 1991, Brady et al.21 already reported that there were two variants of V regions in S. mutans SpaP proteins. However, this finding was based on restriction fragment length polymorphism (RFLP) analysis. Different from Esberg et al.13, we did not observe the enhanced SAG-dependent adherence of the SpaP type B strain as compared to those of the type A strains. Since 2 of the 3 S. mutans type B strains showed very low SAG-dependent adherence due to the truncated SpaP proteins, it should be kept in mind that the adherence data in type B group were obtained from one strain (UA159) only. Future studies are needed to screen more S. mutans isolates and obtain more type B strains, in order to establish the association between S. mutans SpaP genotype and SAG-mediated adherence.
In addition, both this study and the studies of Esberg et al.12,13. examined the association between SpaP genotypes and the SAG-mediated adherence by analyzing the gene sequences and testing the adherence of the strain on the SAG coated surfaces. With this design, it is impossible to discover if the type of SpaP protein affects its affinity to SAG. Further research is needed to explore this possibility.
Our finding that 2 of the 3 S. mutans type B strains showed low SAG-dependent adherence and no SpaP expression on the cell surface indicates that the adherence capability of S. mutans depends on the SpaP cell surface expression rather than the genotype of SpaP. Back in 1987, Ayakawa et al.22 have reported that S. mutans strains could be grouped as SpaP retainer and nonretainer strains. In the later studies, it became clear that the SpaP could be retained via different mechanism. The SpaP nonretainer strain NG 5 failed to anchor SpaP to the cell surface due to a point mutation within the srtA gene23, whereas the other nonretainer strain Ingbritt 162 lost the surface SpaP due to a premature stop codon in SpaP protein. The strain GS-5 was classified to the “others” group in Ayakawa’s study22. However, the exact same mutation was discovered in the SpaP of GS-524. It was believed by most researchers that frequent laboratory culturing of the strains led to mutations in an environment lacking appropriate selective pressures11. In our study, strain HG723 is our own clinical isolate and has not been cultured frequently. The discovery of the same adenine insertion in this clinical isolate HG723, as in the laboratory strains GS5 and Ingbritt 162, indicates that this mutation may be more frequently present in S. mutans strains than previously thought11. To exclude the potential contamination of strain HG723 by strain GS-5, we also compared the colony morphology of these two strains on BHI agar (data not shown). They are completely different: the colonies of strain GS-5 are smooth and flat, whereas those of strain HG723 were structured and with flower shape.
Our dot-blot data showed that the cell pellets of strain GS-5 and HG723 did not react with any of SpaP monoclonal antibodies tested, including 1-6F (the globular apical head of the molecule), 4-10A (helical stalk) and 5-5D (A/P region interaction)17, whereas the spent medium of these two strains clearly reacted with all tested antibodies. This suggests that the premature termination of SpaP translation in GS-5 and HG723 led to truncated SpaPs, which lack of the C-terminal cell-wall spanning region and the secretion of the protein into the culture medium. Our results were in line with the finding of Jakubovics et al.11 where the western immunoblot was used to detect the SpaP polypeptides in the spent-medium of strain Ingbritt 162.
It is interesting to observe that the dot-blot expression of the SpaP type-B strain UA159 in spent medium was rather similar to the other two type-B strains (GS-5 and HG723), even though the SpaP of UA159 is complete. The SpaP of strain UA159 in spent-medium seemed to react stronger to the tested antibodies than those on the cell surfaces, whereas the reverse was observed for the type-A strains. Likewise, the SpaP expression on the cell surface of UA159 was much lower than those of the type-A strains. However, the adherence ability of strain UA159 to SAG-coated surfaces was average when compared to other type-A strains. Further research is required to understand the relation between cell-wall localization of SpaP and SAG-mediated adherence in strain UA159.
Cell-surface hydrophobicity was thought to mediate bacterial adherence to teeth and other mucosal surfaces25. In our study, the low hydrophobicity of strain GS-5 and HG723 is probably due to the loss of SpaP on their cell surfaces. The hydrophobicity of strain UA159 did not seem to correlate with its adherence to SAG. Its hydrophobicity was the lowest among all tested strains, whereas its adherence ability to SAG was average among all strains. Russell and Smith26 found the hydrophobicity of S. mutans is associated not only with SpaP, but also with other surface proteins and lipoteichoic acid. Therefore, beside hydrophobic forces, other factors may also contribute to the adherence of S. mutans.
In conclusion, the presence of SpaP on the cell surface determined the adherence of S. mutans to SAG. With the limited numbers of strains we tested, no relation was found between the genotypes of SpaP and the adherence capability of S. mutans strains. Nevertheless, future clinical studies are needed to investigate not only the association between S. mutans SpaP genotype and SAG-mediated adherence but also the relationship between the genotype and the caries risk.
Methods
Bacterial strains and growth condition
Nine S. mutans strains were cultured in this study, including strain UA159 (ATCC 700610, laboratory strain)27, UA140 (clinical isolate)28, V403 (clinical isolate)29, GS-5 (laboratory strain)24, NG8 (laboratory strain)30, C180-2 (our own clinical isolate), HG723 (our own clinical isolate), HG982 (our own clinical isolate) and C67-1 (our own clinical isolate). All strains were routinely grown on Brain Heart Infusion (BHI) agar or in BHI broth at 37 °C under anaerobic condition (80% N2, 10% CO2, 10% H2). When indicated, erythromycin (Em) was included at 10 μg/ml.
Comparison of SpaP protein sequences among S. mutans strains
Genomic DNA (gDNA) was extracted from overnight culture of 8 out of the cultured 9 S. mutans strains using the Genejet Genomic DNA purification kit (Thermo Scientific, MA, USA). The spaP gene of an individual S. mutans strain was amplified by PCR from the extracted gDNA using a primer set (Supplementary Table S1). The PCR products were purified with a PCR purification kit (Thermo Scientific, MA, USA) and sequenced by Sanger sequencing (GATC Biotech, Constance, Germany). The SpaP amino-acid sequence of S. mutans strain NG8 was directly downloaded from NCBI database (accession ACV69919.1). In addition, the sequences of 2 S. mutans clinical isolates from Esberg et al.12 were downloaded (strain Nicklas Stromberg 20; accession MF959050.1 and strain Nicklas Stromberg 40; accession MF959070.1). These two strains belong to type-A and type-B, respectively.
The complete SpaP amino-acid sequences and the A3VP1-region (residue 385-874) of 11 S. mutans strains were aligned in MEGA version 7, using ClustalW with default settings. The phylogenetic trees based on the A3VP1-region10 were also constructed, using the Neighbor-Joining method and 1000 bootstrap replications31. Protein similarities were calculated using sequence identity matrix in BioEdit version 7.0.432 using the full SpaP protein alignment.
SAG-mediated adherence of S. mutans
Parotid saliva was collected from healthy volunteers. All volunteers were informed about the objectives and procedure of the study and have signed informed consents before the start of the study. The study was approved by the ACTA ethical review board (201962) and all experiments were carried out in accordance with the guidelines of ACTA. The parotid saliva was collected with a Lashley cup while chewing the sugar-free chewing gum. After collection, the parotid saliva samples were kept on ice for 30 min followed by centrifugation at 4000 × g at 4 °C for 10 min. Subsequently, the supernatant was discarded and the pellets were resuspended with sterile Milli-Q water (crude SAG) by vortexing and pipetting to an equal volume as the original parotid saliva sample.
Crude SAG was diluted 4 times with 0.1 M sodium carbonate (pH = 9.2) and added into the wells of a non-affinity 96-well plate (200 μL/well). This plate was then covered with a lid containing polystyrene pegs (NuncTM, Roskilde, Denmark) overnight at 4 °C to allow the surfaces of pegs to be coated with crude SAG. The pegs were washed on the next day with Phosphate Buffer Saline (PBS) containing 0.1% Tween 20 to remove non-specifically bound proteins.
The individual S. mutans strain (9 strains in total) at mid-log phase was used to test adherence to the SAG coated pegs. In detail, S. mutans were grown till an OD600 of 0.5 in BHI broth and harvested by centrifugation at 5000 × g for 10 min. The cell pellets were washed with adherence buffer (0.05 M KCl, 1 mM CaCl2, 1 mM potassium phosphate, 0.1 mM MgCl2, pH = 6.0) and adjusted the cell density to 3 × 109 CFU/ml. These S. mutans resuspensions were dispensed into a new 96-well plate (200 μL/well). The plate was covered by the lid containing SAG-coated pegs and incubated for 1 h anaerobically at 37 °C. The pegs with adhered S. mutans cells were then washed once with PBS and transferred to 0.0016% resazurin solution for 3 h at 37 °C. The metabolic activity of the cells was measured by the changes in fluorescence intensity (FI) of resazurin solutions. The FI was recorded in a spectrofluorometer (Spectramax M2, Molecular Device) with a 485 nm excitation wavelength and 580 nm emission wavelength. For all resazurin measurements, a resazurin solution alone (negative control) was included. The average FI value of the negative control was subtracted from the FI values of the experimental groups before further calculation. The adherence efficiency of each strain was calculated as the percentage relative to the adherence of S. mutans UA159. A spaP clean knockout strain was constructed. The adherence of S. mutans UA159 and the isogenic ΔspaP strains (see Supplementary material and Table S1) to SAG-coated surfaces was examined as described above.
In addition, the SAG-mediated adherence of S. mutans strain was evaluated with a fluorescence microscope. The Amsterdam Active Attachment (AAA) model33,34 containing round glass coverslips (10 mm diameter) was used for the evaluation. Similarly, the coverslips were first coated with crude SAG (1.6 ml/well) overnight at 4 °C and were then washed and transferred to a 24-well plate containing S. mutans suspension (1.5 ml/well). The S. mutans suspensions were prepared in the same way as above mentioned. After 1 h, the coverslips were washed with PBS and fixed with 4% formaldehyde for 2 h. After fixation, all coverslips were washed twice with PBS and stained with 2 μM SYTO 13 fluorescent nucleic acid staining solution (Invitrogen, Leiden, Netherlands). The images of S. mutans adherence were taken with a Zeiss fluorescence microscope (Zeiss, Jena, Germany) with a 40x lens.
In every experiment, each group generally contains 2 replicates and the experiment was repeated 2 times.
Surface expression of SpaP proteins
A dot-blot assay was used to examine the antigenicity of SpaP protein in the spent-media and on the cell surfaces of 9 S. mutans strains. To this end, S. mutans overnight cultures were adjusted to a cell density of 3 × 109 CFU/ml and centrifuged at 4000 × g at 4 °C for 10 min. The spent-media and the cell pellets were stored and processed separately. For the spent-medium, protein precipitation was carried out following the method developed by Damerval et al.35. Four times volume of pre-cooled acetone was added to the spent-medium and kept at −20 °C for 60 min. The precipitated protein was obtained by centrifugation at 12000 × g at 4 °C. The protein pellets were washed and resuspended in PBS to 10 x the initial culture volume. As for the S. mutans cell pellets, they were washed and resuspended in PBS.
To carry out the dot-blot assay, the spent-medium protein precipitates or S. mutans cell resuspensions (50 μL/sample) were spotted onto a nitrocellulose membrane using Bio-Dot apparatus (Bio-Rad, Hercules, California). The samples were allowed to settle for 30 min before the membrane was removed from the apparatus. The membrane was washed with PBST and probed with mouse anti-SpaP mAb 1-6Fab IgG, 4-10A, 5-5D6b22 (Kindly provided by Professor L. J. Brady, University of Florida, Gainesville, USA) diluted 1:500 in PBST containing 2% albumin, followed by alkaline phosphatase conjugated goat anti-mouse (1:1000) antibody (Dako, Denmark). The binding sites of anti-SpaP monoclonal antibodies mapped on the tertiary structure of SpaP are shown in Supplementary Fig. S2. For visualization blots with alkaline phosphatase were stained with 5-bromo-4-choro-3 indolyl phosphate (Roche Diagnostics, Mannheim, Germany). S. mutans UA159 ΔspaP strain and Actinomyces naeslundi ATCC12104 which do not contain the SpaP protein were used as negative control strains.
Hydrophobicity of S. mutans
The hydrophobicity of S. mutans strains was evaluated with hexadecane, as described by Rosenberg et al.36. In brief, S. mutans cells grown till mid-log phase were harvested and resuspended in PBS to a final OD600 of 0.5. To every 3 ml resuspension, a volume of 150 μl hexadecane (Sigma, Damstadt, Germany) was added. The mixture was vortexed for 10 s and then settled for 20 min at room temperature before the OD600 value of the aqueous layer was determined. Hydrophobicity was expressed as the percentage of reduction in OD600 of the aqueous phase relative to that of the initial resuspension.
Statistical analysis
The data were analyzed with the Statistical Package for Social Science (SPSS, Version 23.0, Chicago, IL, USA). Student’s t-test was applied to examine the difference of adhered bacterial metabolic activity between S. mutans UA159 and S. mutans UA159 ΔspaP. One-way ANOVA was used to evaluate the difference in adherence and hydrophobicity among the S. mutans strains, followed by Student-Newman-Keuls post-hoc test. Differences were considered statistically significant at p < 0.05.
References
Loesche, W. J. Role of Streptococcus mutans in human dental decay. Microbiol Rev 50, 353–380 (1986).
Rosan, B. & Lamont, R. J. Dental plaque formation. Microbes Infect 2, 1599–1607 (2000).
Brady, L. J. et al. The changing faces of Streptococcus antigen I/II polypeptide family adhesins. Mol Microbiol 77, 276–286 (2010).
Jenkinson, H. F. & Demuth, D. R. Structure, function and immunogenicity of streptococcal antigen I/II polypeptides. Mol Microbiol 23, 183–190 (1997).
Kelly, C. G., Todryk, S., Kendal, H. L., Munro, G. H. & Lehner, T. T-cell, adhesion, and B-cell epitopes of the cell surface Streptococcus mutans protein antigen I/II. Infect Immun 63, 3649–3658 (1995).
Ligtenberg, A. J., Karlsson, N. G. & Veerman, E. C. Deleted in malignant brain tumors-1 protein (DMBT1): a pattern recognition receptor with multiple binding sites. Int J Mol Sci 11, 5212–5233 (2010).
Larson, M. R. et al. Crystal structure of the C-terminal region of Streptococcus mutans antigen I/II and characterization of salivary agglutinin adherence domains. J Biol Chem 286 (2011).
Troffer-Charlier, N., Ogier, J., Moras, D. & Cavarelli, J. Crystal structure of the V-region of Streptococcus mutans antigen I/II at 2.4 A resolution suggests a sugar preformed binding site. J Mol Biol 318, 179–188 (2002).
Homonylo-McGavin, M. K. & Lee, S. F. Role of the C terminus in antigen P1 surface localization in Streptococcus mutans and two related cocci. J Bacteriol 178, 801–807 (1996).
Larson, M. R. et al. Elongated fibrillar structure of a streptococcal adhesin assembled by the high-affinity association of alpha- and PPII-helices. Proc Natl Acad Sci USA 107, 5983–5988 (2010).
Jakubovics, N. S., Stromberg, N., van Dolleweerd, C. J., Kelly, C. G. & Jenkinson, H. F. Differential binding specificities of oral streptococcal antigen I/II family adhesins for human or bacterial ligands. Mol Microbiol 55, 1591–1605 (2005).
Esberg, A. et al. Streptococcus mutans adhesin biotypes that match and predict individual caries development. Ebio Medicine 24, 205–215 (2017).
Esberg, A., Löfgren-Burström, A., Ohman, U. & Strömberg, N. Host and bacterial phenotype variation in adhesion of Streptococcus mutans to matched human hosts. Infect Immun 80, 3869–3879 (2012).
Han, J.-H., Baik, B.-J., Yang, Y.-M., Park, J.-Y. & Kim, J.-G. Generation of antibodies against N-terminus fragment of AgI/II protein from Streptococcus mutans GS-5. J Korean Acad Pediatr Dent 33, 401–410 (2006).
Brady, L. J., Piacentini, D. A., Crowley, P. J. & Bleiweis, A. S. Identification of monoclonal antibody-binding domains within antigen P1 of Streptococcus mutans and cross-reactivity with related surface antigens of oral streptococci. Infect Immun 59, 4425–4435 (1991).
McArthur, W. P. et al. Characterization of epitopes recognized by anti-Streptococcus mutans P1 monoclonal antibodies. FEMS Immunol Med Microbiol 50, 342–353 (2007).
Heim, K. P. et al. Identification of a supramolecular functional architecture of Streptococcus mutans adhesin P1 on the bacterial cell surface. J Biol Chem 290, 9002–9019 (2015).
Batista, M. T. et al. Immunogenicity and in vitro and in vivo protective effects of antibodies targeting a recombinant form of the Streptococcus mutans P1 surface protein. Infect Immun 82, 4978–4988 (2014).
Childers, N. K. et al. A controlled clinical study of the effect of nasal immunization with a Streptococcus mutans antigen alone or incorporated into liposomes on induction of immune responses. Infect Immun 67, 618–623 (1999).
Oli, M. W., Rhodin, N., McArthur, W. P. & Brady, L. J. Redirecting the humoral immune response against Streptococcus mutans antigen P1 with monoclonal antibodies. Infect Immun 72, 6951–6960 (2004).
Brady, L. J. et al. Restriction fragment length polymorphisms and sequence variation within the spaP gene of Streptococcus mutans serotype c isolates. Infect Immun 59, 1803–1810 (1991).
Ayakawa, G. Y. et al. Isolation and characterization of monoclonal antibodies specific for antigen P1, a major surface protein of mutans streptococci. Infect Immun 55, 2759–2767 (1987).
Lee, S. F. et al. Identification of a point mutation resulting in loss of cell wall anchoring activity of srtA of Streptococcus mutans NG5. Infect Immun 72, 4314–4317 (2004).
Murakami, Y., Nakano, Y., Yamashita, Y. & Koga, T. Identification of a frameshift mutation resulting in premature termination and loss of cell wall anchoring of the PAc antigen of Streptococcus mutans GS-5. Infect Immun 65, 794–797 (1997).
Gibbons, R. J. Adherent interactions which may affect microbial ecology in the mouth. J Dent Res 63, 378–385 (1984).
Russell, R. R. B. & Smith, K. Effect of subculturing on location of Streptococcus mutans antigens. FEMS Microbiol Lett 35, 319–323 (1986).
Ajdic, D. et al. Genome sequence of Streptococcus mutans UA159, a cariogenic dental pathogen. Proc Natl Acad Sci USA 99, 14434–14439 (2002).
Qi, F., Chen, P. & Caufield, P. W. The group I strain of Streptococcus mutans, UA140, produces both the lantibiotic mutacin I and a nonlantibiotic bacteriocin, mutacin IV. Appl Environ Micro 67, 15–21 (2001).
Macrina, F. L., Jones, K. R., Alpert, C. A., Chassy, B. M. & Michalek, S. M. Repeated DNA sequence involved in mutations affecting transport of sucrose into Streptococcus mutans V403 via the phosphoenolpyruvate phosphotransferase system. Infect Immun 59, 1535–1543 (1991).
Brady, L. J., Piacentini, D. A., Crowley, P. J., Oyston, P. C. & Bleiweis, A. S. Differentiation of salivary agglutinin-mediated adherence and aggregation of mutans streptococci by use of monoclonal antibodies against the major surface adhesin P1. Infect Immun 60, 1008–1017 (1992).
Kumar, S., Stecher, G. & Tamura, K. MEGA7: Molecular Evolutionary Genetics Analysis Version 7.0 for Bigger Datasets. Mol Biol Evol 33, 1870–1874 (2016).
Hall, T. A. BioEdit: A user-friendly biological sequence alignment program for Windows 95/98/NT. Nucleic Acids Symp Ser 41, 95–98 (1999).
Deng, D. M. et al. Streptococcus mutans SMU.623c codes for a functional, metal-dependent polysaccharide deacetylase that modulates interactions with salivary agglutinin. J Bacteriol 191, 394–402 (2009).
Exterkate, R. A., Crielaard, W. & Ten Cate, J. M. Different response to amine fluoride by Streptococcus mutans and polymicrobial biofilms in a novel high-throughput active attachment model. Caries Res 44, 372–379 (2010).
Damerval, C., Vienne, D. D., Zivy, M. & Thiellement, H. Technical improvements in two-dimensional electrophoresis increase the level of genetic variation detected in wheat-seedling proteins. Electrophoresis 7, 52–54 (2010).
Rosenberg, M. Microbial adhesion to hydrocarbons: twenty-five years of doing MATH. FEMS Microbiol Lett 262, 129–134 (2006).
Author information
Authors and Affiliations
Contributions
Conceived and designed the experiments: Yang, J.M., Deng, D.M., Ligtenberg, A.J. Performed the experiments: Yang, J.M., Deng, D.M., Nazmi, K., Ligtenberg, A.J. Analyzed the data: Yang, J.M., Deng, D.M., Brandt, B.W., Crielaard, W., Ligtenberg, A.J. Contributed reagents/materials/analysis tools: Deng, D.M., Nazmi, K., Wu, Y.F., Crielaard, W., Ligtenberg, A.J. Wrote the paper: Yang, J.M., Deng, D.M., Brandt, B.W., Wu, Y.F., Ligtenberg, A.J.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Yang, J., Deng, D., Brandt, B.W. et al. Diversity of SpaP in genetic and salivary agglutinin mediated adherence among Streptococcus mutans strains. Sci Rep 9, 19943 (2019). https://doi.org/10.1038/s41598-019-56486-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-019-56486-9
- Springer Nature Limited