Abstract
Leaf flattening influences plant photosynthesis, thereby affecting product yield and quality. Here, we obtained a stably inherited leaf crinkled mutant (lcm), derived from the Chinese cabbage doubled haploid (DH) ‘FT’ line using EMS mutagenesis combined with isolated microspore culture. The crinkled phenotype was controlled by a single recessive nuclear gene, namely Bralcm, which was preliminarily mapped to chromosome A01 by bulked segregant analysis RNA-seq, and further between markers SSRS-1 and IndelD-20 using 1,575 recessive homozygous individuals in F2 population by a map-based cloning method. The target region physical distance was 126.69 kb, containing 23 genes; the marker SSRMG-4 co-segregated with the crinkled trait. Further, we found SSRMG-4 to be located on BraA01g007510.3C, a homolog of AHA2, which encodes H+-ATPase2, an essential enzyme in plant growth and development. Sequence analysis indicated a C to T transition in exon 7 of BraA01g007510.3C, resulting in a Thr (ACT) to Ile (ATT) amino acid change. Genotyping revealed that the leaf crinkled phenotype fully co-segregated with this SNP within the recombinants. qRT-PCR demonstrated that BraA01g007510.3C expression in lcm mutant leaves was dramatically higher than that in wild-type ‘FT’. Thus, BraA01g007510.3C is a strong candidate gene for Bralcm, and AHA2 is possibly associated with leaf flattening in Chinese cabbage.
Similar content being viewed by others
Introduction
The leaf is a vital vegetative organ that provides energy for plant growth and development through photosynthesis, respiration, and by storing nutrients1,2. Leaf morphology is an important feature of plant architecture that significantly affects yield performance3,4,5. The control of leaf morphology is a complex physiological and biochemical process, regulated by the expression of many functional genes and transcriptional regulatory factors6.
Numerous genes involved in leaf morphology have recently been identified. YABBY genes were first identified by Siegfried et al.7. YABBY members are involved in the promotion of abaxial fate in Arabidopsis. WOX genes have several members including WOX1 and WOX3/PRS, which play a major role in leaf development8. HD-ZIP III family members have an important role in leaf adaxial fate determination9,10,11. The LATERAL ORGAN BOUNDARIES DOMAIN (LBD) family genes participate in the morphogenesis of plant lateral organs12,13, such as AtLBD6, which control cell proliferation on the adaxial surfaces of leaves, leading to the development of flat leaves with bilateral symmetry14. H+-ATPase 2 (AHA2) is an essential enzyme for plant growth, which is involved in the transmembrane transport, the elongation and growth of cells, the opening and closing of stomata, the response of plants to environmental stress and other physiological processes. It is auto-regulatory and affects gene expression through a variety of regulatory systems to adapt to the changes in the environment during the development process of plants15. Leaves with different morphologies have different light energy utilization efficiencies, which may result in yield differences. Therefore, it is important to study the genes which affect the development of leaf morphology.
Appropriate leaf rolling is an important element in the ideotype model of plant breeding, as it can increase yield by improving photosynthetic efficiency and reducing leaf transpiration under drought stress. However, excessive leaf rolling can lead to growth retardation and yield reduction16. In plants, many mutants associated with leaf flatness have been found. Fang et al.17 obtained the rumpled and twisted leaf 1 (rtl1) mutant using the ethyl methanesulfonate (EMS) treatment in rice. The rtl1 locus with the phenotype of rumpled and twisted leaf was mapped to chromosome 4 using Bulked Segregant Analysis (BSA) sequencing, with a genetic distance of 1.47 cM. In upland cotton, a wrinkled leaf mutant (wr3) was identified and found to be controlled by a recessive gene, and the wr3 gene was mapped on chromosome 21 using BSA sequencing18. A dwarf cucumber mutant (scp-2) with dark green wrinkled leaves was obtained and the scp-2 gene was mapped to a 30.75 kb region on chromosome 3 using map-based cloning; CsDET2, which is involved in brassinosteroid (BR) synthesis, was identified as a candidate gene19. A mutation in the crinkled leaves 8 gene (cls8) was acquired by EMS treatment in Arabidopsis thaliana, and the cls8 gene was mapped to a region of 39.2 kb on chromosome 2. The candidate gene identified was At2g21790, which encodes the large subunit of ribonucleotide reductase (RNR1)20,21,22. Hsieh et al.23 found an Arabidopsis SLOW GROWTH3 (slo3) mutant, which had an obvious phenotype with severe growth retardation and curled or crinkled rosette leaves, which may be due to uneven growth of the leaf surface. The candidate gene identified was At3g61360, which encodes a pentatricopeptide repeat (PPR) protein. These mutants are the ideal materials for studying the regulatory mechanism of maintaining leaf flattening.
Chinese cabbage is an economically and nutritionally important vegetable crop, and is widely cultivated in Eastern Asia24. The leaf is the main product organ of Chinese cabbage. The size and shape of the leaf directly affects its attraction to consumers. In this study, a stably inherited leaf crinkled mutant (lcm) was derived in Chinese cabbage by EMS treatment combined with isolated microspore culture. We performed phenotypic characterization, genetic analysis, and fine mapping of lcm, and a high-resolution genetic map was constructed using simple sequence repeats (SSR) and insertion/deletion (indel) molecular markers. In the target region, the BraA01g007510.3C was the most likely candidate gene. This study lays the foundation for elucidating the molecular mechanism of leaf flattening in Chinese cabbage.
Results
Morphological characterization of lcm mutant
The leaves of the lcm mutant were crinkled and developed slowly at all stage compared with ‘FT’ (Fig. 1a–c). However, at the heading stage, the crinkled phenotype of leaves in lcm mutant was the most obvious and the leafy head was remarkably smaller than ‘FT’ (Fig. 1c,d, Table S1). The flow cytometry results indicated that the lcm mutant was diploid (Fig. S1). The growth curve showed that the difference in leaf length, leaf width, and plant width were significant at 9–15 days after the third true leaf appeared (Fig. S2a–c), and the dry weight and fresh weight were all significantly reduced in lcm compared to the wild-type ‘FT’ (Fig. S2d,e).
The scanning electron microscopy (SEM) (Hitachi, Japan) result revealed that at the site of the leaf folds in lcm mutant, the cells were squashed into longer and thinner than in ‘FT’ (the red arrow) (Fig. 2a,b), and in the leaf crinkled part of lcm mutant, the cells also became crinkled (the blue arrow) (Fig. 2c,d). The paraffin section showed that the number of palisade cell was increased in the crinkled part of the mutant leaf than ‘FT’ (Fig. 3).
Genetic analysis
The reciprocal cross F1 plants exhibited the same phenotype as ‘FT’, suggesting that the phenotype of lcm mutant is controlled by a recessive gene. Among 137 F2 individuals, 34 plants showed the mutant phenotype, whereas the others were the wild-type phenotype. The segregation ratio of the lcm phenotype corresponded to the expected ratio of 3:1 for ‘FT’ and lcm mutant (χ2 < χ0.052 = 3.84) (Table 1). A total of 24 lcm phenotype individuals were shown in 50 BC1 individuals, the others were the wild-type. The segregation ratio was corresponded to the expected ratio of 1:1 between lcm mutant and ‘FT’ (χ2 < χ0.052 = 3.84) (Table 1). These results indicated that the mutant character was controlled by a single recessive nuclear gene, namely Bralcm.
Preliminary mapping of Bralcm by bulked segregant RNA-seq (BSR-Seq)
Bralcm was preliminarily mapped using BSR-Seq. A total of 49,089,636 and 53,868,502 clean reads were obtained from mutation pool and normal pool, respectively, and the Q20 (those reads with an average quality score > 20) was > 93% and GC content was approximately 48%, suggesting that the sequencing was highly accurate (PRJNA565107) (Table S2). The clean reads were aligned to reference genome and a total of 38,792,091 and 42,976,949 single-nucleotide variants (SNVs) were obtained from the mutation and normal pools, respectively. Mutant loci with sequencing coverage depth greater than 3X were screened and the Euclidean distance5 (ED5) value of SNV was calculated. Based on the distribution of SNV, the linkage of ED5 value was plotted (Fig. S3). Bralcm was located on chromosome A01, using the top 1% of ED5 values as the correlation threshold, the target region was identified as chromosome A01 1016464–9172697 (Table S3).
A total of 200 F2 recessive homozygous individuals with the mutant phenotype and by two parental lines (‘FT’ and lcm) were used to validate the result of BSR-Seq. The result showed that two SSR markers SSRHG-1 and SSRG-9 were in linkage with Bralcm (Table S4, Fig. S4), and Bralcm was mapped between markers SSRHG-1 and SSRG-9 on the chromosome A01 (Fig. 4a), with genetic distances of 2.6 cM and 3.81 cM, respectively.
Fine mapping of Bralcm
New SSR and indel markers were designed between markers SSRHG-1 and SSRG-9. Six polymorphic markers SSRHG-7, IndelD-14, SSRS-1, IndelD-20, SSRMG-5, and SSRMG-4 were screened (Table S4). A total of 1,575 F2 plants with the mutant phenotype were used as the mapping population. The label of recombinants indicated that SSRHG-7, IndelD-14, SSRS-1were located on one side, and IndelD-20, SSRMG-5, and SSRMG-4 were located on the other side of Bralcm gene. Bralcm was mapped between SSRS-1 and IndelD-20. SSRS-1 had seven recombinants with Bralcm, the genetic distance was 0.22 cM, and twelve recombinants were different from SSRS-1 were detected between IndelD-20 and Bralcm, the genetic distance was 0.38 cM. The physical distance was approximately 126.69 kb (Fig. 4b). However, no recombinant was found in SSRMG-4, which is between SSRS-1 and IndelD-20 (Fig. 4b).
Candidate gene analysis
According to the result of fine mapping and the Brassica database (https://brassicadb.org/brad/index.php), there were 23 genes in the target region (Fig. 4c, Table S5). Among them, the marker SSRMG-4 was co-segregation with the mutant trait and contained in BraA01g007510.3C, a homolog of AHA2 which encodes an H+-ATPase2 (AHA2) and is one of the vital enzymes in plant growth and development. Therefore, seven pairs of primers were designed along the full length of BraA01g007510.3C for cloning in ‘FT’ and lcm mutant (Table S4). Cloning and sequencing results showed one SNP present in the lcm mutant, a C to T missense transition, leading to an amino acid codon to change from Thr (ACT) to Ile (ATT) (Fig. 5a,b, Fig. S5).
Co-segregation analysis
The nineteen recombinants were further cloned between the two closest markers, SSRS-1 and InDelD-20. As shown in Fig. 5c, the sequences of the nineteen recombinants were in line with lcm, verifying the co-segregation of this SNP and the leaf crinkled trait. Therefore the BraA01g007510.3C was identified as the strongest candidate gene for the lcm mutant.
Expression of candidate gene BraA01g007510.3C
Expression levels of BraA01g007510.3C was examined in the lcm mutant and ‘FT’ by quantitative reverse transcription PCR (qRT-PCR). The results showed that the expression of BraA01g007510.3C in leaves were dramatically higher in the lcm mutant than in ‘FT’ (Fig. 6a). To further analyze gene expression patterns, the expression of BraA01g007510.3C in leaves at different periods was analyzed in both the lcm mutant and ‘FT’. The qRT-PCR results showed that, compared to ‘FT’, the expression of BraA01g007510.3C in lcm mutant was up-regulated the third true leaf, in the sixth true leaf, rosette leaf and head leaf (Fig. 6b), and notably as the expression level of lcm mutant was highest in the head leaf and was consistent with the phenotype, the leaf was the most crinkled at heading stage.
Enzyme activity and bioinformatics analysis of AHA2
No significant difference was observed between the enzyme activity of AHA2 in lcm and ‘FT’ (Table S6). The TMHMM result showed that AHA2 had eight transmembrane regions comprising amino acids at positions 242–264, 277–299, 644–666, 671–690, 710–732, 753–770, 785–807, and 814–833 (Fig. S6). The mutation site was present in the extracellular region. The SWISS-MODEL results showed that the protein tertiary structure was altered which amino acid residue of mutation site was changed, the spatial structure of AHA2 did not change as illustrated in Fig. S7. To understand the phylogenetic relationship between AHA2 and other species, a phylogenetic tree was constructed based on an NCBI BLAST search. According to the amino acid sequence, ten other homologous proteins were selected from other species as follows: Raphanus sativus, Brassica oleracea var. oleracea, Brassica napus, Arabidopsis thaliana, Camelina sativa, Tarenaya hassleriana, Capsicum annuum, Solanum lycopersicum, Musa acuminata subsp. malaccensis, Trema orientale (Fig. 7). The result indicated that AHA2 demonstrated the highest homology with Raphanus sativus and a homology rate was up to 98.52%.
Discussion
In this study, the lcm mutant was obtained by EMS mutagenesis combined with isolated microspore culture, from the wild type ‘FT’, a DH line in Chinese cabbage. The phenotype of the lcm mutant was controlled by a single recessive nuclear gene, which was preliminarily mapped to chromosome A01 by BSR-Seq, and ultimately mapped to the region between markers SSRS-1 and IndelD-20. The physical distance was approximately 126.69 kb, containing twenty-three genes. The result of cloning and co-segregation verification revealed an SNP in BraA01g007510.3C where a C to T transition caused an amino acid codon to change from Thr (ACT) to Ile (ATT). Therefore, the BraA01g007510.3C was identified as the most likely candidate gene for Bralcm. These findings provide a solid foundation for functional analysis of Bralcm and promote the understanding of the molecular mechanism of leaf flattening in Chinese cabbage.
Some known genes, which are involved in the development of leaf morphology, can affect leaf flattening. For example, the KNOX gene was over-expressed in the cotyledons and leaves of transgenic plants with a wrinkled phenotype25,26,27,28. OsAS2 in rice showed high homology with Arabidopsis ASYMMETRIC LEAVES2 (AS2) which belongs to the LBD gene family, and the over-expression of OsAs2 in rice caused aberrant twisted leaves with abnormal structure which lacked auricles14. Both RNA interference (RNAi) of YAB3 and over-expression of WOX3 showed a twisted leaf phenotype in rice29. Ren et al.30 found that leaf flattening is related to miRNA levels. Over-expression of miR166 can cause rosette leaves to change from flat to downward curving, and over-expression of miR319 can cause wavy leaf in Chinese cabbage. Mao et al.31 verified that over-expression of miR319a can silence the miR319a-targeted Transcription factor (TCP) gene and lead to wavy leaf in Chinese cabbage, which results from excess cell divisions in the leaf margins. In this study, the BraA01g007510.3C was the strongest candidate gene, which had a base substitution resulting in a missense mutation. BraA01g007510.3C encodes a homolog of AHA2, one of the key enzymes in plant growth and development, which can regulate enzyme activity, is involved in cellular transmembrane transport, and the response of plants to environmental stress32,33. For the first time, we discovered that AHA2 is associated with leaf flattening in Chinese cabbage. It is important to study the function and regulatory role of AHA2 in leaf flattening.
A total of 11 H+-ATPase homologous genes (AHA1–11) have already been identified in A. thaliana34. Further, an Arabidopsis homozygous loss-of-function mutant of the AHA2 gene has been isolated and identified. The homozygous loss-of-function mutants grow normally; however, the proton secretion activity of the roots in the aha2 mutant is decreased. Reduced membrane potential (high exogenous potassium) or pH gradient (high exogenous pH) leads to decreased growth of aha2 mutant compared to the wild-type35. The present study shows that AHA2 is associated with leaf flattening and the mutation resulted in a crinkled leaf phenotype. Previous studies showed that AHA2 affects the growth and development of roots in A. thaliana, and the root phenotype of the loss-of-function mutants of aha2 was remarkably shorter than that of the wild-type36,37. We observed the root phenotype at different periods as shown in Fig. S8 and expression of BraA01g007510.3C was analyzed by qRT-PCR. The result showed that the length of mutant root was significantly shorter than the ‘FT’, along with significantly down-regulated expression levels of BraA01g007510.3C compared to ‘FT’. This result is consistent with a previous study36 (Fig. S9). Our findings revealed that AHA2 may affect root development in the lcm mutant, and a correlation may exist between root and leaf development. The electrochemical gradient generated by proton pump is the main factor affecting plant nutrient absorption, nutrient status, and root biomass38. The Thr586 mutation in extracellular region was near the Asp588, which is an ATP binding site. Previous study reported that the mutation near the binding site could affect the ability of binging site39. Therefore, we hypothesized that AHA2 mutation may influence the ability of ATP binding, thus, affecting the development of root, thereby affecting the absorption of nutrients, eventually leading to the crinkled phenotype. Correlation of the growth of aerial and underground plant portions prompted us to analyze the expression of BraA01g007510.3C in leaves, thus revealing that the leaf expression levels of BraA01g007510.3C in the mutant were up-regulated. Thus, we hypothesize that AHA2 may directly influence the leaf flattening and the regulatory mechanism needs to be clarified in the future. Furthermore, the relationship between AHA2 and root and leaf development requires further investigation.
The results of the study indicated that the expression levels of BraA01g007510.3C were up-regulated in lcm mutant. SNP variations in the intron or promoter regions may lead to changes in expression levels in mutant40. However, sequencing results showed that the sequences of BraA01g007510.3C in the intron or promoter regions did not have any differences between ‘FT’ and lcm mutant. However, we found an SNP variation in the seventh exon of BraA01g007510.3C, and the expression levels were increased. AHA2 gene was responsible for adaptation of plants to different environments. The activity and expression levels of the protein were modulated through a variety of regulatory mechanisms to adapt to the environment during the development process of plants15. Previous studies reported that with the changes in external environmental conditions, the levels of plant mRNA will change40. Mito et al.40 reported that pma2 gene was homologous to AHA2 in tomato, and the expression of pma2 was activated when the root was exposed to adverse environmental conditions. Therefore, we speculated that when lcm mutant and wild-type were grown in the same environment, due to the mutation of Bralcm gene, the roots of the lcm mutant grew weaker and the ability to absorb nutrients may be weakened, resulting in less nutrients being transported to the aerial part. The aerial part may adapt to the nutrient starving conditions by improving the expression of AHA2.
Previous studies have shown that proton dynamics generated by H+-ATPase directly affect cell expansion41. Cellular shape is supported by the cell wall42. The acid growth theory was put forward to explain the cellular expansion43,44,45. Cell acidification activates expansions and other cell wall remodeling enzymes, resulting in loosening of the cell wall components and cell expansion45,46,47. However, these studies could not fully clarify the reason behind the crinkled phenotype. Therefore, SEM and paraffin sections were employed to observe the form of leaf cells. Results showed that the epidermis of leaf cells was crinkled and irregular, and the number of palisade cells was higher than that in ‘FT’. Therefore, we hypothesized that the crinkled phenotype is a result of the changes involving the epidermis and palisade cells. The leaf expression levels of BraA01g007510.3C in the mutant was up-regulated and resulted in the increased secretion of H+, and led to acidification outside the cell wall and activation of the cell wall remodeling enzymes. This resulted in a loosened cell wall, disintegration of cellulose and other components, irregular epidermis, and an increase in the number of palisade cells, ultimately, causing a crinkled phenotype. To clarify whether changes in enzyme activity were responsible for the phenotype, we measured the enzyme activity using the H+-ATPase ELISA kit. The result showed that the enzyme activity of the mutant and ‘FT’ was typically unchanged (Table S6). Previous study reported that the H+-ATPase activity is regulated by domains, such as the C-terminal domain, which played a key role in the regulation of enzyme activity through phosphorylation statua and bound effector proteins48. Removal of the C-terminal domain resulted in a significantly increased enzyme activity48. In this study, however, the mutant locus was not present in the domain. Therefore, we speculated that the unaltered enzyme activity might be due to the absence of mutations in the domains that affect enzyme activity. The reason for crinkled leaf may be due to the changes in the expression of AHA2 gene, which affected the cell numbers without changing its enzyme activity in mutant.
In conclusion, Bralcm was mapped to a region of approximately 126.69 kb on chromosome A01, and BraA01g007510.3C was predicted to be the most likely candidate gene. BraA01g007510.3C encodes a homolog of AHA2, a vital enzyme involved in plant growth and development. For the first time, we discovered that AHA2 could be associated with leaf flattening in Chinese cabbage. Our findings will contribute to further research on the molecular mechanism of leaf flattening in Chinese cabbage.
Materials and methods
Plant material
The mutant lcm was derived from ‘FT’, a Chinese cabbage doubled haploid (DH) line, by isolated microspore culture combined with EMS mutagenesis. The isolated microspores were treated with 0.16% EMS solution for 15 min, according to the method of Huang et al.49. The lcm mutant exhibited stable inheritance after multiple generations.
Ploidy determination
The ploidy level of the lcm mutant was determined by FACSCalibur Flow Cytometer, according to the method of Huang et al.24. Three biological replicates were performed for each sample.
Morphological observation of lcm mutant
Five consistent lcm mutant and wild-type ‘FT’ plants were selected for investigation. When the third true leaf appeared, the leaf length, leaf width, and plant width were measured every 3 days for a total of 22 days. Three lcm mutants and three ‘FT’ plants were randomly selected every 6 days to measure dry weight and fresh weight for a total of 31 days. At the heading stage, five plants were selected to measure the length, width and weight of the leafy head between lcm mutant and ‘FT’.
Observation of leaf cell
To observe the shape of a leaf cell, the third true leaves with the same part from lcm mutant and ‘FT’ were examined by SEM as previously described by Lin et al.50. A fresh leaf of lcm mutant and ‘FT’ with the same part was fixed in FAA (50% ethanol, 5% glacial acetic, 10% formalin) for 24 h at room temperature (25 °C), dehydrated with different concentrations of alcohol (50–100%) and then permeated in xylene. Finally, the sample was embedded in paraffin. The paraffin section was processed by a microtome (LeicaRM2016, Germany); after staining, the leaf was observed using an optical microscope (Nikon ECLIPSE 80i, Japan).
Genetic analysis of lcm mutant
To confirm the genetic analysis of the leaf crinkled phenotype, the lcm mutant was crossed with ‘FT’ to construct F1, F2, and BC1 generations. The separation ratio of the F2 and BC1 generations was determined using a chi-squared (χ2) test.
BSR-Seq analysis
The lcm mutant was crossed with ‘701’, a cabbage Sprouts DH line, whose genetic background was very different from the lcm mutant, to obtain an F2 segregation population for BSR-Seq and fine mapping. Fifty mutant and fifty normal phenotypes were selected from the F2 population, and sampled at the same part and stage to construct two mixed pools. Total RNA was extracted using RNApure Total RNA Kit (Aidlab, Beijing, China).
Approximately 5 GB of raw reads were obtained from the transcriptome sequencing on an Illumina HiSeq platform GENEWIZ (Suzhou, China). Clean reads were obtained by filtering low quality data and removing contamination and adaptors. The clean reads were aligned to the reference genome (https://brassicadb.org/brad/datasets/pub/Genomes/Brassica_rapa/V3.0/) using HISAT software (v2.0.14) with the default parameters51. By comparing the results of each sample with the reference genome, mpileup processing was carried out with samtools (v0.1.18) software to obtain the single nucleotide variants (SNVs)52. ANNOVAR (v2013.02.11) was used for SNV annotation. ED was calculated to estimate the genetic distance between the SNVs and the target trait: the larger the ED value, the closer the SNV is to the target trait53. To eliminate background noise, the ED value of each SNV was processed to the power of 5 (ED5). All ED5 values were ranked, the SNV corresponding to the top 1% of ED5 values were screened, and the specific chromosome regions related to the target trait were further located according to the distribution of these SNV.
Development of molecular markers
The SSR molecular markers were designed according to the result of BSR-Seq. The polymorphic markers were screened between lcm and ‘701’, after linkage markers were identified, new SSR and indel markers were designed using Primer Premier 5.0 software for fine mapping. The genetic linkage map was constructed with Map-Makerv3.054 and genetic map distances (cM) of recombination frequencies were transformed using Kosambi’s mapping function55.
Candidate gene analysis
Primers were designed to amplify the candidate gene in lcm and ‘FT’. The amplified products were purified using a Gel Extraction Kit (Omega, USA). Then the purified products were inserted into the pGEM-T Easy Vector (Promega, USA) and transformed into Top10 competent cell (CWBIO, Beijing, China). The sequences were compared using DNAMAN software.
Expression analysis by qRT-PCR
To analyze the expression pattern of the candidate gene, total RNA was extracted from roots and leaves at different periods, and from stems, flowers, and flower buds in mutant lcm and wild-type ‘FT’. First-strand cDNA was synthesized using the FastQuant RT Super Mix (TIANGEN, Beijing, China). The cDNA was used as a template for qRT-PCR with the SYBR Green PCR Master Mix (TaKaRa, Dalian, China). The qRT-PCR primers are shown in Table S5. The reaction volume and PCR program were as described by Huang et al.49. The melting curves were established to detect primer dimers. The relative gene expression data were calculated using the 2−ΔΔCt method56. All reactions were performed using three biological replicates and the data were analyzed using the Bio-Rad IQ5 Manager software.
Enzyme activity assay
The plant H+-ATPase level was measured by an ELISA Kit (Meimian Biotech Co, Ltd, Yancheng, China). Leaves and roots (1 g) were cut into pieces and added to 9 ml PBS (pH 7.2–7.4), followed by centrifugation and collection of the supernatant. The experimental process was conducted according to the manufacturer instructions of H+-ATPase kits57,58.
Bioinformatics analysis of AHA2
The transmembrane domain of AHA2 was predicted by TMHMM Server v.2.0 online software (https://www.cbs.dtu.dk/services/TMHMM-2.0/). The protein tertiary structure of AHA2 was predicted by SWISS-MODEL software (https://swissmodel.expasy.org/). The phylogenetic tree of AHA2 was constructed by MEGA X 10.0.5 software with Clustal W and neighbor-joining based on 1,000 bootstrap replications.
References
Ichihashi, Y. & Tsukaya, H. Behavior of leaf meristems and their modification. Front. Plant Sci 6, 1060. https://doi.org/10.3389/fpls.2015.01060 (2015).
Li, Z. X. et al. Developmental changes in carbon and nitrogen metabolism affect tea quality in different leaf position. Plant Physiol. Biochem 106, 327–335. https://doi.org/10.1016/j.plaphy.2016.06.027 (2016).
Yuan, L. P. Super-high yield hybrid rice breeding. Hybrid Rice 12, 1–6. https://doi.org/10.16267/j.cnki.1005-3956.1997.06.001 (1997).
Chen, Z. X., Pan, X. B. & Jun, H. U. Relationship between rolled-leaf and ideal plant type of rice (Oryza sativa L.). Jiangsu Agric. Res 22, 88–91. https://doi.org/10.16872/j.cnki.1671-4652 (2001).
Tsukaya, H. Leaf shape: Genetic controls and environmental factors. Int. J. Dev. Biol. 49, 547–555. https://doi.org/10.1387/ijdb.041921ht (2005).
Chai, L. et al. Advances in plant leaf development and morphogenesis research. Seed 37, 1001–4705. https://doi.org/10.16590/j.cnki.1001-4705 (2018).
Siegfried, K. R., Eshed, Y., Baum, S. F., Otsuga, D. & Bowman, J. L. Members of the YABBY family specify abaxial cell fate in Arabidopsis. Development 126, 4117–4128. https://doi.org/10.1021/ie020097t (1999).
Nakata, M. & Okada, K. The three-domain model: A new model for the early development of leaves in Arabidopsis thaliana. Plant Signal. Behav. 7, 1423–1427. https://doi.org/10.4161/psb.21959 (2012).
Mcconnell, J. R., Emery, J. F., Eshed, Y., Bao, N. & Barton, M. K. Role of PHABULOSA and PHAVOLUTA in determining radial patterning in shoots. Nature 411, 709–713. https://doi.org/10.1038/35079635 (2001).
Wenkel, S., Emery, J., Hou, B. H., Evans, M. M. S. & Barton, M. K. A Feedback regulatory module formed by LITTLE ZIPPER and HD-ZIPIII genes. Plant Cell Online 19, 3379–3390. https://doi.org/10.1105/tpc.107.055772 (2007).
Kim, Y. S. et al. HD-ZIP III activity is modulated by competitive inhibitors via a feedback loop in Arabidopsis shoot apical meristem development. Plant Cell Online 20, 920–933. https://doi.org/10.1105/tpc.107.057448 (2008).
Thatcher, L. F., Kazan, K. & Manners, J. M. Lateral organ boundaries domain transcription factors: New roles in plant defense. Plant Signal. Behav 7, 1702–1704. https://doi.org/10.4161/psb.22097 (2012).
Gombos, M. et al. Characterization of the LBD gene family in Brachypodium: A phylogenetic and transcriptional study. Plant Cell Rep. 36, 61–79. https://doi.org/10.1007/s00299-016-2057-0 (2017).
Ma, Y., Wang, F., Guo, J. & Zhang, X. S. Rice OsAS2 gene, a member of LOB domain family, functions in the regulation of shoot differentiation and leaf development. J. Plant Biol. 52, 374–381. https://doi.org/10.1007/s12374-009-9048-4 (2009).
Portillo, F. Regulation of plasma membrane H+-atpase in fungi and plants. Biochem. Biophys. Acta. 1469(1), 31–42. https://doi.org/10.1016/s0304-4157(99)00011-8 (2000).
Liu, X. et al. A novel antisense long noncoding RNA, TWISTED LEAF, maintains leaf blade flattening by regulating its associated sense R2R3-MYB gene in rice. New Phytol 218, 774–788. https://doi.org/10.1111/nph.15023 (2018).
Fang, Y. X. et al. Genetic analysis and molecular mapping of a rice rumpled and twisted leaf mutant (rtl1). Chin. J. Rice Sci. 25, 261–266. https://doi.org/10.3724/SP.J.1011.2011.00353 (2011).
Li, F. L., Di, J. C., Zhao, L. & Chen, X. S. Mapping of a new wrinkled leaf (wr3) gene in upland cotton. Hereditas 36, 1256–1260. https://doi.org/10.3724/SP.J.1005.2014.1256 (2014).
Hou, S. S. et al. A mutant in the CsDET2 gene leads to a systemic brassinosteriod deficiency and super compact phenotype in cucumber (Cucumis sativus L.). Theor. Appl. Genet 130, 1693–1703. https://doi.org/10.1007/s00122-017-2919-z (2017).
Warren, G. Isolation of mutations affecting the development of freezing tolerance in Arabidopsis thaliana (L.) Heynh. Plant Physiol. 111, 1011–1019. https://doi.org/10.1104/pp.111.4.1011 (1996).
Warren, G.J., Thorlby, G.J. & Bramke, I. Mutants deficient in cold hardiness. In: Plant Cold Hardiness. https://doi.org/10.1007/978-1-4615-0711-6_2 (Springer, Boston, 2002).
Garton, S., Knight, H., Warren, G. J., Knight, M. R. & Thorlby, G. J. crinkled leaves 8—A mutation in the large subunit of ribonucleotide reductase—leads to defects in leaf development and chloroplast division in Arabidopsis thaliana. Plant J. 50, 118–127. https://doi.org/10.1111/j.1365-313X.2007.03035.x (2007).
Hsieh, W. Y., Liao, J. C. & Hsieh, M. H. Dysfunctional mitochondria regulate the size of root apical meristem and leaf development in Arabidopsis. Plant Signal. Behav 10, e1071002. https://doi.org/10.1080/15592324.2015.1071002 (2015).
Huang, S. N., Liu, Z. Y., Li, D. Y., Yao, R. P. & Feng, H. Screening of Chinese cabbage mutants produced by 60Co γ-ray mutagenesis of isolated microspore cultures. Plant Breed 133, 480–488. https://doi.org/10.1111/pbr.12166 (2014).
Kano-Murakami, Y., Yanai, T., Tagiri, A. & Matsuok, M. A rice homeotic gene, OSH1, causes unusual phenotypes in transgenic tobacco. FEBS Lett. 334, 0–368. https://doi.org/10.1016/0014-5793(93)80713-5 (1993).
Sinha, N. R., Williams, R. E. & Hake, S. Overexpression of the maize homeobox gene, KNOTTED-I, causes a switch from determinate to indeterminate cell fates. Genes Dev. 7, 787–795. https://doi.org/10.1101/gad.7.5.787 (1993).
Hareven, D., Gutfinger, T., Parnis, A., Eshed, Y. & Lifschitz, E. The making of a compound leaf: Genetic manipulation of leaf architecture in tomato. Cell 84, 735–744. https://doi.org/10.1016/s0092-8674(00)81051-x (1996).
Postma-Haarsma, A. D. et al. Characterization of the KNOX class homeobox genes Oskn2 and Oskn3 identified in a collection of cDNA libraries covering the early stages of rice embryogenesis. Plant Mol. Biol. 39, 257–271. https://doi.org/10.1023/a:1006153506868 (1999).
Dai, M., Hu, Y., Zhao, Y., Liu, H. & Zhou, D. X. A WUSCHEL-LIKE HOMEOBOX gene represses a YABBY gene expression required for rice leaf development. Plant Physiol. 144, 380–390. https://doi.org/10.1104/pp.107.095737 (2007).
Ren, W. Q., Wang, H., Bai, J. J., Wu, F. J. & He, Y. K. Association of microRNAs with types of leaf curvature in Brassica rapa. Front. Plant Sci. 9, 73. https://doi.org/10.3389/fpls.2018.00073 (2018).
Mao, Y. et al. MicroRNA319a-targeted Brassica rapa ssp. pekinensis TCP genes modulate head shape in Chinese cabbage by differential cell division arrest in leaf regions. Plant Physiol. 164, 710–720. https://doi.org/10.1104/pp.113.228007 (2014).
Morsomme, P. & Boutry, M. The plant plasma membrane H+-ATPase: Structure, function and regulation. BBA Biomembr. 1465, 1–16. https://doi.org/10.1016/S0005-2736(00)00128-0 (2000).
Sondergaard, T. E., Schulz, A. & Palmgren, M. G. Energization of transport processes in plants. Roles of the plasma membrane H+-ATPase. Plant Physiol. 136, 2475–2482. https://doi.org/10.2307/4356603 (2004).
Baxter, I. et al. Genomic comparison of P-type ATPase ion pumps in Arabidopsis and rice. Plant Physiol. 132, 618–628. https://doi.org/10.1104/pp.103.021923 (2003).
Haruta, M. et al. Molecular characterization of mutant Arabidopsis plants with reduced plasma membrane proton pump activity. J. Biol. Chem. 285, 17918–17929. https://doi.org/10.1074/jbc.M110.101733 (2010).
Młodzińska, E., Kłobus, G., Christensen, M. D. & Fuglsang, A. T. The plasma membrane H+-ATPase AHA2 contributes to the root architecture in response to different nitrogen supply. Physiol. Plant. 154, 270–282. https://doi.org/10.1111/ppl.12305 (2015).
Hoffmann, R. D. et al. Roles of plasma membrane proton ATPases AHA2 and AHA7 in normal growth of roots and root hairs in Arabidopsis thaliana. Physiol Plant 166, 848–861. https://doi.org/10.1111/ppl.12842 (2019).
Fuglsang, A. T., Kristensen, A., Cuin, T. A., Schulze, W. X. & Palmgren, M. G. Receptor kinase mediated control of primary active proton pumping at the plasma membrane. Plant J 80, 951–964. https://doi.org/10.1111/tpj.12680 (2014).
Buchpedersen, M. J. & Palmgren, M.G. Conserved asp684 in transmembrane segment m6 of the plant plasma membrane p-type proton pump aha2 is a molecular determinant of proton translocation. J. Biol. Chem. 278(20), 17845–17851. https://doi.org/10.1109/90.502240 (2003)
Mito, N., Wimmers, L. E. & Bennett, A. B. Sugar regulates mRNA abundance of H(+)-atpase gene family members in tomato. Plant Physiol. 112(3), 1229–1236 https://doi.org/10.1104/pp.112.3.1229 (1996)
Haruta, M., Tan, L. X., Bushey, D. B., Swanson, S. J. & Sussman, M. R. Environmental and genetic factors regulating localization of the plant plasma membrane H+-ATPase. Plant Physiol 176, 364–377. https://doi.org/10.1104/pp.17.01126 (2017).
Dünser, K. & Kleine-Vehn, J. Differential growth regulation in plants—the acid growth balloon theory. Curr. Opin. Plant Biol. 28, 55–59. https://doi.org/10.1016/j.pbi.2015.08.009 (2015).
Rayle, D. L. & Cleland, R. E. Enhancement of wall loosening and elongation by acid solutions. Plant Physiol. 46, 250–253. https://doi.org/10.2307/4262153 (1970).
Hager, A., Menzel, H. & Krauss, A. Versuche und hypothese zur primarwirkung des auxins beim streckungswachstum. Planta 100, 47–75. https://doi.org/10.1007/BF00386886 (1971).
Rayle, D. L. & Cleland, R. E. The acid growth theory of auxin-induced cell elongation is alive and well. Plant Physiol 99, 1271–1274. https://doi.org/10.1104/pp.99.4.1271 (1992).
Hager, A. Role of the plasma membrane H +-ATPase in auxin-induced elongation growth: Historical and new aspects. J. Plant Res. 116, 483–505. https://doi.org/10.1007/s10265-003-0110-x (2003).
Savaldi-Goldstein, S., Peto, C. & Chory, J. The epidermis both drives and restricts plant shoot growth. Nature 446, 199–202. https://doi.org/10.1038/nature05618 (2007).
Duby, G. & Boutry, M. The plant plasma membrane proton pump ATPase: A highly regulated P-type ATPase with multiple physiological roles. Pflugers Arch. 457, 645–655. https://doi.org/10.1007/s00424-008-0457-x (2009).
Huang, S. N. et al. Candidate gene prediction for a petal degeneration mutant, pdm, of the Chinese cabbage (Brassica campestris ssp. pekinensis) by using fine mapping and transcriptome analysis. Mol. Breed. 36, 26. https://doi.org/10.1007/s11032-016-0452-4 (2016).
Lin, S. et al. BcMF8, a putative arabinogalactan protein-encoding gene, contributes to pollen wall development, aperture formation and pollen tube growth in Brassica campestris. Ann. Bot. 113, 777–788. https://doi.org/10.1093/aob/mct315 (2014).
Kim, D., Langmead, B. & Salzberg, S. L. Hisat: A fast spliced aligner with low memory requirements. Nat. Methods 12, 357–360. https://doi.org/10.1038/nmeth.3317 (2015).
Li, H. et al. The Sequence Alignment/Map format and SAMtools. Bioinformatics 25, 1653–1654. https://doi.org/10.1093/bioinformatics/btp352 (2009).
Su, A. et al. Identification of genes potentially associated with the fertility instability of S-type cytoplasmic male sterility in maize via bulked segregant RNA-seq. PLoS ONE 11, e0163489. https://doi.org/10.1371/journal.pone.0163489 (2016).
Lander, E. S. et al. MAPMAKER: An interactive computer package for constructing primary genetic linkage maps of experimental and natural populations. Genomics 1, 174–181. https://doi.org/10.1016/0888-7543(87)90010-3 (1987).
Kosambi, D. D. The estimation of map distance from recombination values. Ann. Eugen 12, 172–175. https://doi.org/10.1111/j.1469-1809.1943.tb02321.x (1944).
Livak, K. J. & Schmittgen, T. D. Analysis of relative gene expression data using real-time quantitative PCR and the 2−ΔΔCT method. Methods 25, 402–408. https://doi.org/10.1006/meth.2001 (2001).
Nakano, Y. & Asada, K. Hydrogen peroxide is scavenged by ascorbate-specific peroxidase in spinach chloroplasts. Plant Cell Physiol. 22, 867–880. https://doi.org/10.1093/oxfordjournals.pcp.a076232 (1981).
Chen, Z. et al. The AtrbohF-dependent regulation of ROS signaling is required for melatonin-induced salinity tolerance in Arabidopsis. Free Radic. Biol. Med. 108, 465–477. https://doi.org/10.1016/j.freeradbiomed.2017.04.009 (2017).
Acknowledgements
The research was funded by the China Agriculture Research System (Grant No. CARS-23-A04). We would like to thank Editage (https://www.editage.cn) for English language editing.
Author information
Authors and Affiliations
Contributions
H.F. and S.H. conceived and designed the research. M.Z.; Y.G.; W.F. and Z.L. analyzed the data. M.Z.; G.Q.; Y.Z. and F.S. performed the experiments. M.Z. and S.H. wrote the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Zhang, M., Huang, S., Gao, Y. et al. Fine mapping of a leaf flattening gene Bralcm through BSR-Seq in Chinese cabbage (Brassica rapa L. ssp. pekinensis). Sci Rep 10, 13924 (2020). https://doi.org/10.1038/s41598-020-70975-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-020-70975-2
- Springer Nature Limited
This article is cited by
-
Identification of a candidate gene for the I locus determining the dominant white bulb color in onion (Allium cepa L.)
Theoretical and Applied Genetics (2024)