Abstract
The possibility to predict, characterize and minimize the presence of spurious harmonic content in the longitudinal profile of high brightness electron beams, namely the microbunching instability, has become vital to ensure accurate modeling and reliable operation of radiofrequency and plasma-based linear accelerators such as those driving free-electron lasers. Recently, the impact of intrabeam scattering (IBS) on the instability has been experimentally demonstrated by the authors. This work complements that experimental study by extending existing theories in a self-consistent, piece-wise calculation of IBS in single pass linacs and multi-bend transfer lines. New expressions for the IBS are introduced in two different semi-analytical models of microbunching. The accuracy of the proposed models and the range of beam parameters to which they apply is discussed. The overall modeling turns out to be a fast comprehensive tool for the optimization of linac-driven free-electron lasers.
Similar content being viewed by others
Introduction
Modern science found its fortune in the disposal of high brightness charged particles and photon beams to advance its frontiers. In particular, electron beams have become crucial for several operations, ranging from X-ray free-electron lasers1,2,3,4 (FELs) and plasma accelerators5,6,7 to coherent electron cooling8 and generation of high power THz broadband radiation9. A common need of all these initiatives is preservation and control of the electron beam quality, commonly parametrized by brightness. For instance, matter exploration benefits from stable narrow spectral lines of FELs, granted by longitudinal coherence. However, to date its extension to the water window (from 300 to 500 eV) and higher photon energy results uncertain because of apparently partial understanding and not reproducible evidence of microbunching instability (MBI)10,11,12,13. As the name suggests, this phenomenon is a cascade process that enhances initial non-uniformities of the charge distribution. Because of its broadband gain, it is able to capture and amplify modulations from several \(\upmu \)m to few 100’s of \(\upmu \)m wavelength. Bunch length compression blueshifts these wavelengths by a factor 10–100, reaching the scale of the FEL cooperation length14. The large amplitude \(\upmu \)m-scale modulations in the final electron beam longitudinal phase space translate into large slice energy spread15, causing the reduction of photon brilliance. Moreover, the mixing of MBI-frequencies and FEL coherent emission generates shot-to-shot fluctuations of the multiline FEL, leading to the appearance of sidebands at specific frequencies16,17.
The instability is usually mitigated by Landau Damping18, phase mixing19 or a combination of both20. The first approach makes use of a laser heater (LH)21 in the low energy region of the linac; the second one is implemented via linear optics control through dispersive regions.
The standard analysis of MBI relies on the linearization of Vlasov–Maxwell equation for the electrons distribution \(f(\vec {X})\)22,23 passing through a magnetic bunch length compressor24. The 1-D bunching factor b, defined as the Fourier transform of the bunch longitudinal charge distribution,
is a broadband shot-noise-like spectral distribution. This is amplified by longitudinal space charge (LSC) along accelerating sections and coherent sinchrotron radiation (CSR) in dispersive regions. The effect of LSC and CSR on the formation of microbunches results in an integral equation with specific initial condition23:
Hereafter we call this ensemble of assumptions and expressions Huang–Kim model (HK). Together with density and energy modulations, the formalism allows one to determine the instability gain G, defined as the ratio between final and initial bunching factor. The dominant terms of the expression are
and the effective energy spread induced by energy modulations15
\(R_{56}\) is the element of the transfer matrix that couples the longitudinal coordinates \((z,\delta )\), \(\Delta p(k_0;0)\) is an initial energy modulation and \(\Delta \gamma (k)\) is the energy modulation in Lorentz unit per unit bunching factor, C is the bunch length compression factor implemented at a 4-dipoles magnetic chicane, k is the modulation wave number, \(\sigma _{\delta }\) is the relative energy spread at the entrance of the compressor. The complete expression for the gain can be found in the reference23.
Similarly, the beam harmonic content can be obtained following the Bosch–Kleman (BK) formalism25. Differently from the HK model, whose results are derived for magnetic bunch length compressors only, the BK allows the description of MBI in linear regime along dispersive sections of arbitrary geometry, such as multi-bend transfer lines. The theory treats a 2-dimensional vector space of longitudinal modulations of electrons bunches. All the collective phenomena, namely LSC, CSR and coherent edge radiation (CER), possibly including the effect of vacuum chamber shielding, are introduced by means of impedances \(Z(\lambda )\)26, as a function of the modulation wavelength \(\lambda \). The contribution to beam modulations are expressed via matrix multiplication. Although we limit our discussion to LSC, CSR and CER, it is always possible to add piece-wise other longitudinal collective effects, as long as they can be described by impedances. This makes the model highly adaptable to any kind of section and to any degree of accuracy in the description of the beam line.
Given the integrated impedance \(Z_{col}(\lambda )\) of a specific collective effect along a section of length L, the corresponding matrix acting on the modulations space is
where E(z) is the energy value along the section, with \(0<z<L\).
When the section is energy-dispersive, the effect of longitudinal Landau Damping can be included through the following matrix
where \(C = (1 - hR_{56})^{-1}\) and the functions F and G are
These quantities embody the suppression of gain due to uncorrelated energy spread and they depend on the slice energy profile. Authors considered \(f(\delta )\) as a normalized Gaussian function with rms energy spread \(\sigma _{E}\). More precisely, the dynamics of microbunching inside a dispersive region is regulated by the harmonic content of the slice energy distribution, i.e. by its Fourier transform.
This paper concerns the theoretical description of intrabeam scattering (IBS)27 and its integration in a comprehensive MBI model. Recently, the accelerator community shows a renewed interest in IBS effect in linear accelerators and linac-driven X-ray FELs28,29,30,31. When the study involves a careful characterization of the electron beam longitudinal phase space, IBS cannot be considered as a minor effect. In a previous work30, we demonstrated experimentally the need of inclusion of IBS to correctly understand the development of MBI, especially at high gain values. To do so we used the HK formalism for MBI and a set of equations semi-analytically solved for the IBS. In this paper, we derive completely analytic expressions for the slice energy spread induced by IBS. These results are inserted in both HK and BK models, keeping track of the IBS-induced energy spread and updating piece-wisely the beam slice energy distribution. Starting with a specific but arbitrary profile for \(f(\delta )\) and associated energy spread \(\sigma _{E}(0)\), this value will be increased after a L-long section by the collisions between particles, resulting in an enlargement of the distribution width. To quantify \(\sigma _{E}(L)\), or equivalently the relative uncorrelated energy spread \(\sigma _{\delta }(L)\), we recall an expression for the energy spread growth rate and integrate it. In addition to this, the LH modeling is upgraded with respect to the 1-D approximation adopted in BK25. In order to consider the spatial superposition of laser and electrons32, we treat the whole 3-D configuration space, for arbitrary beam energy distributions.
Results
IBS growth rate
Historically, there are two consistent approaches to characterize the growth rate of transverse and longitudinal emittances. The first one, due to Piwinski33, is based on Analytical Mechanics; the second one, due to Bjorken and Mtingwa34, is based on Quantum Field Theory. These formalisms coincides in the high energy approximation35. In the framework of beam-driven light sources, we are particularly interested to the growth rate of the relative energy spread, whose differential equation is35:
where c is the speed of light, \(r_e\) is the classical electron radius, \(N_e\) is the number of electrons, \(\sigma _{\delta } = \sigma _{E}/E\), \(\gamma = E/mc^2\), \(\epsilon _n\) is the normalized emittance, \(\sigma _{x,y}\) are the beam’s rms sizes, \(\beta _{x,y}\) are the betatron functions, \(\sigma _z\) is the bunch length,
in which \(\eta \) is the dispersion lattice function, and finally
Both the Piwinski33 and Bjorken-Mtingwa34 theory includes the so-called Coulomb logarithm:
with \(b_{max}\) and \(b_{min}\) the maximum and minimum impact parameter of IBS scattering events, \(\theta _{max}\) and \(\theta _{min}\) the maximum and minimum scattering angle. Equation (11) inherits the logarithmic behaviour from the phase space divergence in the presence of long-range interactions; the divergence can be avoided by imposing a cutoff. This procedure is mandatory not only to normalize the integration in the phase space, but also to discard hard scattering events, which may heavily bias IBS contributions in the bunch core.
The minimum scattering angle is usually chosen in terms of Debye length or beam size. The lower limit is taken to be
choosing \(b_{max} = \sigma _x\), (see30), and p is the momentum in the C.o.M. system. We propose a new estimate for the maximum scattering angle30, inspired to the strategy proposed for synchrotrons36. The upper limit is given in terms of the momentum transfer in the collision, q, calculated as the boundary beyond which the integrated scattering rate matches a characteristic time \(\tau \). In the absence of equilibrium conditions, as they commonly happen to be in a storage ring, \(\tau \) becomes here the time the beam takes to travel along the accelerator.
We start from36
where the relation between q and \(\theta \) is33
and \(\bar{\beta }\) is the average normalized velocity in the C.o.M. system and the coefficients u, v and w are36
For a round (\(\epsilon _x = \epsilon _y\), \(\beta _x = \beta _y\)) and ultra-relativistic electron beam in a straight section, the polynomial’s coefficients reduce to:
and the integral can be rewritten in the simpler form
We now apply a change of variable of the form \(x = \chi /(z-1)\), we get
where \(\delta = u/\chi = \gamma \epsilon _n/\beta _x\sigma _{\delta }^2\). We note that in high brightness electron beams, and even for multi-GeV beam energies, \(\delta \) is a small quantity, of the order of \(10^5\)–\(10^6\). This allows us to take into account only terms of the order of \({\mathcal {O}}(1/\sqrt{\delta })\). We therefore rewrite Eq. (13) as:
The mean value of the electron velocity in the C.o.M. frame is \(\bar{\beta } = \frac{\gamma \sigma _{x'}}{\sqrt{2}}\)30. This is substituted in the expression for the angles in (11), getting
Differently from our first extimation30, we can conclude that, at first order in \(\delta \), the Coulomb logarithm does not depend on \(\sigma _{\delta }\), but it does depend upon \(\gamma \). The implication of our new findings compared to our first estimates are illustrated and discussed below.
For an ultra-relativistic beam in a dispersive section, instead36,
Again, the integral can be rewritten in the simpler form
Since \(\alpha u /\zeta \approx 1\) and defining the coefficient \(\omega = \zeta /\alpha ^2\), we obtain
Notice that \(\alpha \) plays the role of \(\chi \) in the non-dispersive case, but now u depends on \(\sigma _H\). As a consequence, the Coulomb logarithm has the same formal expression of the non-dispersive case, but now \(q_{max}\) is the expression (13) times the ratio \(\sigma _{H}/\sigma _{\delta }\).
Again, it is important to underline that these integrals at first order in \(\delta \) are analytically exact, differently from the numerical one used so far30. On top of the higher precision reached in the determination of the Coulomb logarithm, which was still ambiguous in dispersive regions, its functional dependence from the beam energy and from the energy spread is now explicit, leading to new expressions for the induced energy spread.
IBS-induced energy spread
With the proposed expression for the Coulomb logarithm in Eq. (22), we can proceed and solve Eq. (8). We discriminate two cases: dispersive section at constant energy and straight (or non-dispersive) section, in the presence or absence of acceleration. In the latter configuration, the beam energy is assumed to grow linearly along the section with a null dispersion (\({\mathcal {H}}_{x,y} = 0\)) and a gradient \(G = [E(L) - E(0)]/L\), i.e.
Straight section with varying energy
For the moment, we simplify the math by assuming a round beam. Thus, the function in (10) becomes \(g(1) = 2\) and the growth rate differential equation is simplified:
where we make explicit the dependence from \(\gamma \) of the terms. Eq. (8) can be recast in the following form
Using the Fourier Method we get
where q is the part of the argument of the Coulomb logarithm which does not depend on \(\gamma \).
Straight section with constant energy
In this case the separation of variables is immediate, leading to
This expression can also be derived by looking at certain limits of the previous solutions. In fact, this results coincides with the first case, if \(d\gamma \) tend to zero, since the ratio \(d\gamma /G\) reduces to \(L/mc^2\).
Dispersive section
The differential equation to be solved has the form:
The equation can be integrated separating the variables,
in which Ei stands for the exponential integral37.
In order to find the value of \(\sigma _{\delta }(s)^2\), we need to find numerically the zero of the function F, written as
If we take the limit for h that tends to zero, Eq. (33) coincide with (30).
Laser heater
As indicated by Eqs. (3) and (7), the MBI can be damped by a large uncorrelated energy spread. The effect, however, depends on the specific beam energy distribution. Such energy Landau damping is in most cases obtained via the LH. The functionality of a LH has been succesfully tested already at several FEL facilities. Its positive effects on both coherent optical transition radiation and FEL performances are widely known32,38,39.
LH consists of an undulator placed at the center of a chicane in which the electron beam interacts with an external laser. The ongoing process is the formation of modulations at the laser wavelength. The chicane’s dispersion is arranged to smear the phase space structure, leaving the beam with an higher uncorrelated energy spread.
Following the standard procedure to characterize the interaction of the laser with the electron bunch, the process can be described as a shaping of the electron energy distribution32.
where \(\Delta \gamma _{LH}(r)\) is the amplitude of the modulation induced by the resonant interaction32
\(\Delta \gamma = \Delta \gamma _{LH}(0)\) and, assuming a round beam, we’re using cylindrical coordinates to describe the transverse part of the distribution. To obtain the energy distribution, it is sufficient to integrate \(\rho \) over the spatial coordinates
In the original BK formalism, a simpler expression for F and G is given25 and the dependence of \(\rho \) from the transverse coordinates is neglected. Here, we derive fully three-dimensional expressions for Landau damping terms, plugging \(f(\Delta \gamma )\) in Eq. (7), to obtain
These expressions allow to model the superposition of laser and electrons in the BK model and take into account the finite sizes of both laser spot and bunch transverse dimensions together with their eventual mismatch.
Simulations
As a case of study, HK and BK models are implemented to study the microbunching instability gain at the FERMI40 linear accelerator. We use broadband shot-noise density modulation as initial condition for \(b_0(\lambda )\) and compute the bunching evolution along each section of the beam line. In dispersive regions, for the first formalism we apply equation (3), while for the second we build the Landau damping matrix (7). Parameters used for each section are shown in Table 1. The FERMI linac is made of a photo-injector followed by two magnetic compressors (chicanes), and interleaved by accelerating sections. The model starts being applied to the beam at the injector exit, at the beam energy of approximately 100 MeV.
Figure 1 shows the spectral gain obtained for HK and BK model, without the introduction of IBS (blue lines), with IBS given by the approximated Coulomb logarithm30 (red lines) and with the new formulas (magenta lines), as in Eqs. (29), (30) and (33). Since our script uses mean values for \(\beta \) functions and it is not able to reproduce possible strongly non-periodic behaviour along an accelerator section, we used shaded areas to take into account uncertainties on the optics modelling. Taking into account variation of the \(\beta \)s respect to their mean values up to 30% or so we observe a variation of \(\sim 25\%\) of the gain peak in both HK and BK formalisms. This variation corresponds to an errorbar for \(\sigma _{E}^{(MBI)}\) at the end of the linac of approximately \(\pm \,30\) keV with the parameters in Table 1.
The overlapping region between the gain curves obtained with different IBS approaches, namely the numerical one30 and the one presented here, demonstrates the overall consistency of the two approaches. Still, the calculation of the Coulomb logarithm with the new expression tends to provide slightly larger growth rates of the energy spread and instability gain reduction. The comparison between plots in Fig. 1 underlines also a good agreement between the two models for the range of parameters considered here, and, in particular, a comparable reduction under the new IBS addition.
Bosch–Kleman formalism and the new expressions for IBS are also implemented to characterize microbunching instability at the end of the multi-bend transfer line (spreader) of FERMI. To authors’ best knowledge, this is the only way to describe in a semi-analytical manner the contribution of IBS to MBI in dispersive regions that are not chicanes. Parameters used for the linac are shown in Table 1, for the spreader in Table 2.
The gain is shown in Figs. 2 and 3 as a function of modulations uncompressed wavelength and of the energy modulation induced by the laser heater (using expressions (37) and (38)) at the end of the linac and at the end of the transfer line respectively. From these maps, it is possible to extract gain curves at different values of laser heater induced energy modulation. In particular, we show the results in two cases: absence of laser heater and 10 keV of induced energy modulation. Clearly, due to the presence of a long dispersive region, the gain blows up, but it is still kept under control by the effect of IBS, even in the presence of laser heater.
Discussion
We discuss here the assumptions of our expressions. The proposed energy spread growth rate (29), (30) and (33), requires two conditions: ultra-relativistic energies and roundness of the transverse distribution. The first of this requirement is clearly fulfilled in each simulated section and can be used whenever the electrons kinetic energy is much greater than \(m_e c^2\). The second, in general, is not always true. What is true, indeed, is that Twiss parameters in x and y tend to be of comparable magnitude when averaged over tens of meters long sections, but not locally equal. It is easy to show that our approximation leads to an overestimation of IBS effect: the function g(x) has a maximum when its argument is equal to 1. The eventual overestimated contribution, however, lies inside the error-bar due to the optics uncertainties.
The numerical and analytical treatments of Coulomb logarithm gives comparable results in the range of parameters considered here, and typical at short wavelength FELs. The consistency of the two approaches and the fact that the numerical one has been already benchmarked experimentally30 prove the validity of our formulas. Still, it is worth reminding that in the numerical strategy the integration of Eq. (8) is done discarding the functional dependence of the Coulomb logarithm from \(\gamma \) and \(\sigma _{\delta }\). The similarity between the two treatments, in the range of parameter of Table 1, can be interpreted considering that, at first order in \(\delta \), the dependence of \([\log {}]\) from the energy spread disappears along straight sections, see Eq. (21). In spite of this, we believe that, in general, the analytical method is preferable to the other one: while the numerical approach uses a mean value for \(\gamma \) and ignores its variation, our model keeps track of \(\gamma (s)\) and is capable of more accurate predictions.
As for the assumption of linear gain of the instability, we admit that our model is not able to uniquely identify a gain threshold over which the linear regime is not valid anymore. Nonetheless, we can demonstrate that, for the range of parameters considered here, the presence of IBS guarantees the assumption to be valid. This fact is proved by the omnipresent factor 2 (or even higher) of gain reduction in our new model and, at the same time, by the consistency of the analytical results with experimental data presented elsewhere30. This analysis demonstrates once again that a proper inclusion of IBS in the MBI modelling is crucial to a faithfull description of MBI in linear regime.
As a final point, we discuss under which circumstances the growth of uncorrelated energy spread due to IBS can be neglected. Since the energy distribution and the bunching factor are updated step-wisely, by discretizing the curvilinear coordinate along the simulated beamline, the BK model is not able to fully couple the dynamics of MBI, as instead permitted by massive numerical calculations by Vlasov solvers22,31. To give a quantitative answer, we look at the microbunching gain as defined in HK model, Eq. (3), and plug in the analytically derived IBS terms (see Supplementary Material. Doing so, we derive explicit conditions under which the collisions can be neglected. To this purpose, it is easier to simplify Eq. (32), assuming that the uncorrelated energy spread remains small and keeping only the linear terms in s, obtaining
Considering this formula in the derivation of the gain, following the strategy and the assumptions of HK model23, we find that IBS term can be neglected for
where \(\nu \) is the chicane bending angle.
For the parameters in Table 1, \(\lambda _{crit} \approx 2\times 10^{-9}\) m and since the FEL process is affected by modulations at the micron scale, we are legitimized to neglect all the contributions. This result justifies the partial decoupling of MBI and IBS in our model.
Conclusion
The contribution of intrabeam scattering, taking into account the approximated functional dependence of the Coulomb logarithm from beam energy and energy spread, in arbitrary dispersive, non-dispersive and accelerating sections was analytically derived. We present here a new derivation of the expression for the maximum value of the momentum transfer in collisions, written as a function of the electron beam parameters. The expressions have been integrated into two different semi-analytical models for microbunching instability in linear regime. We have compared numerical and analytical results for IBS, finding a slightly stronger damping of the instability by IBS in the analytical model, but still compatible with experimental data presented in literature30. This envisages the need for more accurate measurements of slice energy spread along the accelerator, possibly as function of varying beam parameters, of more accurate characterization of Twiss parameters along the beam line and the development of an even more realistic 3-D modelling of the instability based on the local optics values. Our analytical model results in a more accurate description of the momentum-space cutoff with respect to the numerical one, since it keeps track of the dependence of \(q_{max}\) from \(\gamma \). The approximations adopted in our modelling are all justified, so that the proposed analytical framework for the MBI in the presence of IBS allows to rapidly characterize MBI in a wide range of accelerator parameters, given the capability of Bosch-Kleman formalism to include several collective phenomena, knowing the associated impedances, and arbitrary multi-bend lines.
References
Bonifacio, R., Pellegrini, C. & Narducci, L. Collective instabilities and high-gain regime in a free electron laser. Opt. Commun. 50, 373–8 (1984).
Allaria, E. et al. Highly coherent and stable pulses from the FERMI seeded free-electron laser in the extreme ultraviolet. Nat. Photon. 1, 699 (2012).
Allaria, E. et al. Two-stage seeded soft-x-ray free-electron laser. Nat. Photon. 7, 913 (2013).
Liu, B. et al. Demonstration of a widely-tunable and fully-coherent high-gain harmonic-generation free-electron laser. Phys. Rev. ST Accel. Beams 16, 020704 (2013).
Lu, H. et al. Laser wakefield acceleration of electron beams beyond 1 GeV from an ablative capillary discharge waveguide. Appl. Phys. Lett. 99, 091502 (2011).
Leemans, W. P. et al. Multi-GeV electron beams from capillary-discharge-guided subpetawatt laser pulses in the self-trapping regime. Phys. Rev. Lett. 113, 245002 (2014).
André, T. et al. Control of laser plasma accelerated electrons for light sources. Nat. Commun. 9, 1334 (2019).
Litvinenko, V. N. & Derbenev, Y. S. Coherent electron cooling. Phys. Rev. Lett. 102, 114801 (2009).
Tonouchi, M. Cutting-edge terahertz technology. Nat. Photon. 1, 97 (2007).
Saldin, E. L., Schneidmiller, E. A. & Yurkov, M. Klystron instability of a relativistic electron beam in a bunch compressor. Nucl. Instrum. Methods Phys. Res. A 490, 1 (2002).
Di Mitri, S. Coherent synchrotron radiation, and microbunching instability. In Proc. CERN Accelerator School: Free Electron Lasers and Energy Recovery Linacs, Hamburg, Germany (2016), , CERN Yellow Reports: School Proceedings (ed. Bailey, R.), Vol. 1/2018, CERN-2018-001-SP (CERN, 2018).
Marcus, G. et al. Experimental observations of seed growth and accompanying pedestal contamination in a self-seeded, soft x-ray free-electron laser. Phys. Rev. Accel. Beams 22, 080702 (2019).
Penco, G. et al. Enhanced seeded free electron laser performance with a cold electron beam. Phys. Rev. Accel. Beams 23, 120704 (2020).
Bonifacio, R., McNeil, B. W. & Pierini, P. Superradiance in the high-gain free-electron laser. Phys. Rev. A 40, 4467 (1989).
Ratner, D. et al. Time-resolved imaging of the microbunching instability and energy spread at the linac coherent light source. Phys. Rev. Spec. Top. Accel. Beams 18, 030704 (2015).
Zhang, Z. et al. Microbunching-instability-induced sidebands in a seeded free-electron laser. Phys. Rev. Accel. Beams 19, 050701 (2016).
Roussel, E. et al. Multicolor high-gain free-electron laser driven by seeded microbunching instability. Phys. Rev. Lett. 115, 214801 (2015).
Landau, L. On the vibration of the electronic plasma. JETP 16, 574 (1946).
Di Mitri, S. & Spampinati, S. Microbunching instability suppression via electron-magnetic-phase mixing. Phys. Rev. Lett. 112, 134802 (2014).
Perosa, G. et al. Linear optics control of sideband instability for improved free-electron laser spectral brightness. Phys. Rev. Accel. Beams 23, 110703 (2020).
Saldin, E. L., Schneidmiller, E. A. & Yurkov, M. Longitudinal space charge-driven microbunching instability in the TESLA test facility linac. Nucl. Instrum. Methods Phys. Res. A 528, 355 (2004).
Heifets, S., Krinsky, S. & Stupakov, G. Coherent sinchrotron radiation instability in a bunch compressor. Phys. Rev. Accel. Beams 5, 064401 (2002).
Huang, Z. & Kim, K. J. Formulas for coherent synchrotron radiation microbunching in a bunch compressor chicane. Phys. Rev. Spec. Top. Accel. Beams 5, 074401 (2002).
Di Mitri, S. Bunch-length compressors. Proceedings of the CERN Accelerator School: Free Electron Lasers and Energy Recovery Linacs, Hamburg, Germany (2016), CERN Yellow Reports: School Proceedings , (ed. Bailey, R.) Vol. 1/2018, CERN-2018-001-SP (CERN, 2018).
Bosch, R. A., Kleman, K. J. & Wu, J. Modeling two-stage bunch compression with wakefields: Macroscopic properties and microbunching instability. Phys. Rev. Spec. Top. Accel. Beams 11, 090702 (2008).
Zotter, B. W. & Kheifets, S. A. Impedances and Wakes in High-Energy Particle Ac (Word Sientific Pub Co Inc., 1998).
Piwinski, A., Bjorken, J. D. & Mtingwa, S. K. Wilson prize article: reflections on our experience with developing the theory of intrabeam scattering. Phys. Rev. Accel. Beams 21, 114801 (2018).
Huang, Z. Intrabeam Scattering in an X-ray FEL Driver. LCLS-TN-02-8 (2002).
Penn, G. Intra-beam scattering for free electron lasers and its modeling in chicanes. In Lawrence Berkeley National Laboratory. LBNL Report #: LBNL-6762E.
Di Mitri, S. et al. Experimental evidence of intrabeam scattering in a free-electron laser driver. New J. Phys. 22, 083053 (2020).
Tsai, C. Y. et al. Theoretical formulation of phase space microbunching instability in the presence of intrabeam scattering for single-pass or recirculation accelerators. Phys. Rev. Accel. Beams 23, 124401 (2020).
Huang, Z. et al. Measurements of the linac coherent light source laser heater and its impact on the x-ray free-electron laser performance. Phys. Rev. Spec. Top. Accel. Beams 13, 020703 (2010).
Piwinski, A. Intra-beam scattering. In Proc. 9th Int. Conf. on High Energy Accelerators 405 (1974).
Bjorken, J. & Mtingwa, S. Intrabeam scattering. Part. Accel. 13, 115 (1983).
Bane K.L.F. An Accurate, Simplified Model of Intrabeam Scattering. SLAC-AP-141 (2002).
Raubenheimer, T. O. The core emittance with intrabeam scattering in e+/e- rings. Part. Accel. 45, 111 (1994).
Abramowitz, M. & Stegun, I. A. Handbook of Mathematical Functions (Dover, 1972).
Spampinati, S. et al. Laser heater commissioning at an externally seeded free-electron laser. Phys. Rev. Accel. Beams 17, 120705 (2014).
Lee, J. et al. PAL-XFEL laser heater commissioning. Nucl. Instrum. Methods Phys. Res. Sect. A 843, 39 (2017).
Allaria, E. et al. The FERMI@Elettra free-electron-laser source for coherent X-ray physics: Photon properties, beam transport system and applications. New J. Phys. 12, 075002 (2010).
Author information
Authors and Affiliations
Contributions
Both author contributed equally to this manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
This article is published under an open access license. Please check the 'Copyright Information' section either on this page or in the PDF for details of this license and what re-use is permitted. If your intended use exceeds what is permitted by the license or if you are unable to locate the licence and re-use information, please contact the Rights and Permissions team.
About this article
Cite this article
Perosa, G., Di Mitri, S. Matrix model for collective phenomena in electron beam’s longitudinal phase space. Sci Rep 11, 7895 (2021). https://doi.org/10.1038/s41598-021-87041-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-021-87041-0
- Springer Nature Limited