Abstract
The prevalence of multidrug-resistant (MDR) pathogens raises public fears of untreatable infections and represents a huge health risk. There is an urgent need to exploit novel antimicrobial agents. Due to the unique mechanisms, antimicrobial peptides (AMPs) with a low probability to achieve resistance are regarded as potential antibiotic alternatives to address this issue. Herein, we develop a panel of synthetic peptide compounds with novel structures based on the database filters technology (DFT), and the lead peptide LI14 shows potent antibacterial activity against all tested drug-resistant bacteria. LI14 exhibits rapid bactericidal activity and excellent anti-biofilm and -persisters activity, simultaneously showing a low propensity to induce resistance. Moreover, LI14 shows tolerance against pH, temperatures, and pepsin treatment, and no detectable toxicity both in vitro and in vivo. Mechanistic studies revealed that LI14 induces membrane damage by targeting bacterial-specific membrane components and dissipates the proton motive force (PMF), thereby resulting in metabolic perturbations and the accumulation of toxic metabolic products. Furthermore, LI14 sensitizes clinically relevant antibiotics against MDR bacteria. In animal models of infection, LI14 or combined with antibiotics are effective against drug-resistant pathogens. These findings suggest that LI14 is a promising antibiotic candidate to tackle MDR bacterial infections.
Similar content being viewed by others
Introduction
The increasing crisis of antimicrobial resistance in pathogenic bacteria exacerbates untreatable systemic infections in the clinic, leading to high mortality in patients and economic loss1. Drug-resistant ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species) bacteria are the main causes of the majority of nosocomial infection worldwide2,3. Alarmingly, novel plasmid-encoded mobile antibiotic resistance genes (ARGs) such as blaNDM-1, mcr-1, and tet(X3/X4) were found to mediate bacterial resistance to carbapenems4, colistin5, and tigecycline6,7, respectively, which are considered the last resort for the treatment of Gram-negative bacteria relevant infections. In addition to the acquired resistance by horizontal gene transfer and chromosomal mutation, the formation of biofilm in these bacteria8, a collection of microbial communities encased in an extracellular matrix, further aggravates this crisis with a substantially reduced antibiotic susceptibility9 and leaves few choices for clinicians. Meanwhile, changes in the bacterial metabolic state also have an important impact on antibiotic potency10. For instance, bacterial persisters are a small stochastically formed subpopulation of low-energy bacterial cells and are highly tolerant to traditional antibiotics11, which are responsible for chronic and recurrent infections12. Facing these challenges, there is a dire need to identify novel and promising compounds to combat these drug-resistant or tolerant pathogens.
Antimicrobial peptides (AMPs), also recognized as host defense peptides, are bioactive small proteins produced by multicellular organisms as immune defenses to fight other harmful microorganisms13,14. As one of the most promising antibacterial agents, contrary to conventional antibiotics, the majority of AMPs act by disrupting bacterial membrane, thus usually along with a lower resistance level15,16. On account of the potent antibacterial activity, unique mechanism and rare resistant mutants, AMPs are gaining traction as potential treatment options against drug-resistant bacterial infections17,18. Usually, natural AMPs are not always well-optimized for direct antimicrobial activity, and it is possible that a variety of moderately active peptides with concomitant immunomodulatory properties act effectively when they are delivered directly to infection sites19. By contrast, some synthetic AMPs derived from computer-aided de novo creation or chemical improvement of existing natural AMPs display extremely potent activity in fighting against MDR pathogens20. For example, SAAP-148 optimized from human AMPs LL-37 showed excellent plasma stability and bactericidal activity against MDR pathogens, simultaneously could effectively combat biofilm-producing bacteria and persister cells21. Furthermore, MSI-1 was obtained by truncating MSI-78, which exhibited improved activity and safety compared to its parent AMPs22. Despite these ongoing efforts, few synthetic AMPs were approved for clinical use, partly due to the weak stability under physiological conditions or non-specific toxicity in vivo.
In this study, we performed a rational drug design using database filters technology (DFT) and obtained a novel synthetic antibacterial peptide termed LI14. Furthermore, we evaluated its systematic effectiveness against MDR pathogen in vitro and in animal models of infection, as well as its stability, safety, mechanisms of action, and synergistic activity with clinically relevant antibiotics. Our work highlights the therapeutic potential of LI14 peptide in the fight against infections caused by antibiotic-resistant bacteria.
Results
Database-guided peptide design and characterizations of designed peptides
Antibacterial peptide database (APD) includes all kinds of peptides antibiotics information, which laid the foundation for peptide screening and the development of database-filtering technology (DFT)23,24. DFT is able to utilize the most likely parameters derived from a set of preclinical- and clinical-phase AMPs to design novel and active peptides25. Here, we aimed to design a set of broad-spectrum AMPs. To identify broad-spectrum AMPs with great systemic efficacy in murine models of infection, we applied DFT to assist the design of promising AMPs. To simplify the design, seven high-frequency amino acids from broad-spectrum peptides: Glycine (G), Lysine (K), Leucine (L), Alanine (A), Isoleucine (I), Cysteine (C), and Arginine (R) were screened19. Considering that the side chain of G and A has a minimal effect on the α-helical structure of peptides, thus these two amino acids were discarded in the following design. To generate the hydrophobic core in the amphipathic α-helices, L residues are placed at the 1 and 4 positions. Compared with the LK, LR, LKR, and LRR, the combination LKK showed high frequency and priority. On the basis of the above steps, a novel heptad repeat sequence template (LKKLCRI)n (n = 1, 2, or 3) was developed and three corresponding AMPs termed LI7 (LKKLCRI-NH2), LI14 ((LKKLCRI)2-NH2), and LI21 ((LKKLCRI)3-NH2) were obtained (Fig. 1a). To improve the stability of peptides, all synthesized peptides were modified with C-termini amidation (Supplementary Table 2).
Helical wheel projections results showed that amino acids with high hydrophobicity and those with low hydrophobicity exhibited obvious bipolarity distribution, implying that these peptides may adopt a typical helical structure (Fig. 1b). Consistently, the predicted 3D structures and the surface membrane potential distribution showed that LI14 and LI21 peptides had perfect hydrophobic and cationic faces (Fig. 1c, d). Moreover, the results from physiological properties calculation (Supplementary Table 2) showed that LI14 and its derivatives showed typical cationic and high hydrophobicity, and all the purity of them were greater than 95%, manifesting that they were all obtained precisely.
As shown in Table 1, LI14 and LI21 displayed superior antibacterial activity against both Gram-positive and Gram-negative bacteria, whereas LI7 showed weak bacteriostatic activity against all test strains. Considering that L17 is only made up of seven amino acids, we speculate that it was too short to form the specific secondary structures, which may hinder its activity. Interestingly, LI14 showed broad-spectrum and strong antibacterial activity against all MDR pathogens with MIC values ranging from 1 to 64 μg/mL, involving methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant Enterococci (VRE), carbapenem-resistant Enterobacteriaceae (CRE), MCR-positive E. coli (MCRPEC) and tigecycline-resistant pathogen, which was comparable to that of some antibiotics used clinically. To better assess the impact of clinically important resistance determinants on the activity of LI14, we determined the antibacterial activity of LI14 against a series of engineered bacteria, which carries blaNDM, mcr, or tet(X4) and confers resistance to carbapenems, colistin or tigecycline, respectively. Excitingly, LI14 displayed equivalent activity for E. coli DH5α and engineered resistant bacteria, indicating that the known resistance genes had no effect on the action of LI14.
To elucidate the structure-activity relationship and active center of LI14 peptide, we conducted an alanine scanning library and obtained 14 Ala substitutes (Supplementary Table 2). Interestingly, we found that LI14-A6 almost lost activity against four tested bacteria (Supplementary Table 3), suggesting the Arg at position 6 was necessary for the antibacterial activity of LI14 peptide. The following helical wheel projection (Supplementary Fig. 1) and CD spectrum in different solutions (Supplementary Fig. 2) results indicated that Ala substitution of Arg at position 6 of LI14 strongly disrupted its secondary structure. Besides, our results indicated that the cyclic peptides LI14 (S-S) showed comparable antibacterial activity with linear LI14, suggesting that the cyclization of LI14 (S-S) via disulfide bond did not affect its antibacterial activity. To reduce the production costs, linear LI14 was selected as the lead peptide for further studies.
Rapid bactericidal and anti-biofilm activity of LI14 peptide
In light of the growth inhibition properties of LI14 peptide against both standard and clinical strains (Fig. 2a), we further performed the time-killing curves to evaluate whether LI14 peptide is a bactericidal compound26. In a nutrient-rich MHB broth with an initial cell density of ~105 CFUs/mL for Gram-positive bacteria, and ~106 CFUs/mL for Gram-negative bacteria, we found that LI14 induced obvious bacterial cell death with a time- and concentration-dependent manner (Fig. 2b–e). Specifically, 32 μg/mL LI14 could elucidate all E. coli strains during 0.5 h, and 8 μg/mL LI14 could completely eliminate the three tested strains at 12 h, except for MRSA T144. In the following study, we evaluated whether LI14 has bactericidal activity against bacteria under growth-metabolic inhibition, which displayed high tolerance to antibiotic treatment27. Interestingly, we observed that LI14 conserved bactericidal activity in nutrient-depleted buffer (PBS), and it is almost as effective as in nutritional conditions (Fig. 2f). This is in distinct contrast to the conventional bactericidal antibiotic ampicillin, which possesses strong bactericidal activity in nutritional conditions but is incapable of eradicating bacteria in metabolically suppressed states26. Resistance development to new antibacterial agents has been a major concern, thus we assessed the ability of Gram-positive and Gram-negative pathogens to develop resistance to LI14 peptide. As shown in Supplementary Fig. 3, after 80 serial passages in the presence of sub-inhibitory concentrations of LI14, the relative MIC values of LI14 against S. aureus ATCC 29213 and E. coli ATCC 25922 were only enhanced by 8-fold, while exposure to the rifampicin or ciprofloxacin resulted in a rapid increase in MIC by 1024- and 256-fold, respectively, indicating that LI14 is less prone to developing resistance compared to conventional antibiotics.
Bacterial biofilms play a vital role in the development of their pathogenicity and drug resistance, and are usually associated with chronic infections28. We next evaluated the anti-biofilm activity of LI14 peptide using crystal violet staining. As shown in Fig. 2g and h, LI14 dose-dependently restrained the generation of biofilms at the sub-inhibitory concentrations and almost eradicated all established biofilms at 128 μg/mL. We further evaluated the bactericidal activity of LI14 to persisters, which can withstand the killing of high-concentrations of antibiotics. Results indicated that LI14 concentration-dependently eliminated persisters, especially for E. coli B2 persisters, and the removal rate of the persisters reached more than 99% at 128 μg/mL of LI14 (Fig. 2i). Altogether, these data suggest that LI14 is a potent bactericidal peptide antibiotic for both drug-resistant pathogens, biofilms and persisters.
Desirable stability of LI14 peptide
The stability of AMPs is one of the decisive factors accounting for its in vivo effectiveness29, thus we tested the stability of LI14 peptide under the circumstances of salt ions, serum, DMEM medium, and proteases. As shown in Supplementary Table 4, the addition of monovalent cations (Na+ and K+) did not influence the activity of LI14, while the addition of divalent cation Mg2+, 10% DMEM and serum slightly impaired the activity of LI14 with MIC values increased by 4–8-fold. Divalent ions such as Mg2+ can form a salt ion bridge of lipid A through electrostatic interaction, which plays a role in outer membrane stabilization. Thus, we reasoned that the molecular mechanism of LI14 might be linked to bacterial membrane disruption30. Furthermore, thermal, pH and protease stability studies showed that LI14 was stable in the 40–100 °C and pH from 2 to 12, while at 121 °C, its antibacterial activity decreased by 4-fold (Supplementary Table 4). Interestingly, LI14 conserved full activity after incubation with pepsin, while trypsin and papain abolished the activity of LI14 peptide (Supplementary Table 4), indicating LI14 had a strong resistance to the proteolytic effect of pepsin. This may be relevant to amino acid compositions of LI14, as pepsin usually hydrolyzed aromatic amino acids, trypsin and papain usually hydrolyzed arginine, lysine, etc. Overall, these data suggest that LI14 peptide shows great thermal, pH and pepsin stability.
LI14 peptide has no detectable toxicity both in vitro and in vivo
Hemolysis and cytotoxicity to mammalian cells are severe barriers to prevent the translational application of peptides31, we sought to evaluate the safety of LI14 peptide both in vitro and in vivo. We first evaluated the in vitro toxicity of LI14 and its derivatives to mammalian red blood cells (RBCs). We found that LI14 had a dispensable and the lowest hemolytic activity (lower than 5% at 128 µg/mL), while LI21, LI14-A3, and LI14-A13 showed moderate hemolytic activity with 10–40% at 128 µg/mL (Supplementary Fig. 4). These results implied that LI14 had lower toxicity to mammalian cells. Then, we assessed the in vivo toxicity of LI14 peptide in mice through daily intraperitoneal injection of LI14 peptide for 6 days at a dose of 10 mg/kg (Supplementary Fig. 5a). During one week of intraperitoneal injection, we did not observe murine behavior changes or body weight loss (Supplementary Fig. 5b). Whole-blood cell profiles and serum biochemical index detection showed no significant difference compared with the control group (Supplementary Fig. 5c, d). Moreover, after one week of intraperitoneal injection, the mouse organs including the heart, liver, spleen, lung, and kidney were taken for H.E. staining, and the results showed that there was no significant difference in histological morphology (Supplementary Fig. 5e). These data indicate that LI14 peptide is a safe and potent antibacterial compound.
LI14 peptide targets multiple components of bacterial membrane
In view of the strong antibacterial activity of LI14 peptide, we intend to investigate its molecular mechanisms. First, in consideration of Mg2+, a stabilizer of the outer membrane, has an obvious influence on the activity of LI14, we speculated that LI14 may target bacterial membrane32,33,34. To test this hypothesis, we first determined the surface morphologies and internal alterations in bacteria cells following treatment by LI14 by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). As demonstrated in Fig. 3a, compared with the intact surface of the control bacteria, substantial bacterial cytolysis in MRSA T144 and distinct membrane damage, such as membrane rupture and pore formation on the surface of E. coli B2 were observed. Furthermore, we found remarkable leakage of intracellular contents or concentrated cytoplasm after treatment with LI14 by TEM analysis. Next, considering that LI14 induced evident damage to the membrane of MRSA T144 and E. coli B2, we wonder whether LI14 targets certain bacterial membrane components. To this goal, the antibacterial activity changes of LI14 peptide in the presence of exogenous lipopolysaccharide (LPS) or phospholipids were determined. Interestingly, the addition of LPS, phosphatidylglycerol (PG) and cardiolipin (CL) drastically weakened the antibacterial activity of LI14 against MRSA T144 and E. coli B2 in a manner of dose-dependent (Fig. 3b–d), implying that LI14 can specifically bind to the LPS located on the bacterial outer membrane and bacterial-specific phospholipids in the inner membrane, thereby inducing the membrane disruption. Subsequently, a hydrophobic fluorescent probe 1-N-phenylnaphthylamine (NPN) was utilized to assess the impact of LI14 peptide on the outer membrane permeability in E. coli B2. Results showed that LI14 dose-dependently increased the outer membrane permeability of E. coli B2 (Fig. 3e). Moreover, the propidium iodide (PI) assay revealed that LI14 also increased inner membrane permeability both in MRSA T144 and E. coli B2 (Fig. 3f, g), indicating remarkable damage to the bacterial membrane. Consistently, flow cytometry analysis further demonstrated that LI14 dose-dependently induced the damage of bacteria cell membrane as PI is a nucleic acid-type dye that only crosses damaged cell membranes and binds to DNA to increase red fluorescence35 (Fig. 3h). All these findings suggest that LI14 disrupts membrane integrity by targeting bacterial cell membrane-specific components.
LI14 peptide dissipates the ΔΨ component of the proton motive force
Insertion of specific membrane disrupting compounds into lipid bilayers usually causes dramatic changes in membrane fluidity, which usually results in loss of membrane protein, leakage of cellular compounds, and bacterial death36,37. Thus, we further evaluated the fluidity of MRSA T144 and E. coli B2 under exposure to LI14 peptide by using a membrane-sensitive dye Laurdan. Results showed that LI14 induced a significant increase in Laurdan GP in a manner of concentration-dependent, indicating the decreased membrane fluidity in the presence of LI14 (Fig. 4a). The changes in membrane rigidity would affect bacterial homeostasis, thereby resulting in fundamental metabolic disorders such as the dissipation of proton motive force (PMF).
PMF is essential for the survival of bacteria and is produced by bacterial transmembrane potential, which is composed of the electric potential (ΔΨ) and the transmembrane proton gradient (ΔpH) together38. We first assessed the impact of LI14 peptide on the membrane potential using a fluorescent dye DiSC3(5), which could accumulate in the cytoplasmic membrane in response to the ΔΨ component of bacterial PMF. When the ΔΨ is disrupted, the probe would be released into the extracellular milieu and resulting in increased fluorescence, and the disruption of ΔΨ would be compensated by increasing ΔpH. Our results showed that DiSC3(5) fluorescence intensity was remarkably increased in MRSA T144 and E. coli B2 after treatment with the increasing concentrations of LI14 peptide, indicating that LI14 disrupted the ΔΨ component of the PMF (Fig. 4b). Moreover, we selected another fluorescence probe BCECF-AM to evaluate the influence of LI14 on the ΔpH. Interestingly, we found that LI14 induced distinctly increased fluorescence tensity in the tested strains, which is more evident in E. coli B2, indicating that LI14 upregulated the ΔpH (Fig. 4c). To prove the above findings, we determined the antibacterial activity of LI14 in different pH conditions ranging from 5.5 to 9.5. Consistent with the above findings, LI14 displayed improved antibacterial activity under alkaline conditions (Fig. 4d). As PMF is composed of ΔΨ and ΔpH, we next analyzed the ultimate effect of LI14 on PMF by swimming motility test. As shown in Fig. 4e, LI14 markedly inhibited bacterial motility at subinhibitory concentrations, indicating the disruption of PMF39,40. Consistently, the addition of exogenous glucose partially abolished the antibacterial activity of LI14 peptide, because glucose could supplement PMF (Fig. 4f). These findings indicate that the ΔΨ component of PMF is a potential target of LI14 peptide.
Bacterial metabolism perturbation contributes to the bactericidal activity of LI14 peptide
We next performed transcription analyses of MRSA T144 and E. coli B2 to acquire a better understanding of the underlying molecular mechanisms of the LI14 peptide. It revealed that there were 231 differentially expressed genes (DEGs) in MRSA T144 and 165 DEGs in E. coli B2 (Supplementary Fig. 6). The representative DEGs with larger expression changes were presented in Fig. 5a and b. We found that these upregulated DEGs were associated with energy metabolism and oxidative phosphorylation, while ribosomal protein-related genes were substantially downregulated by LI14 in MRSA T144 (Fig. 5a). In addition, DEGs associated with membrane damage (e.g., mgtA, mgtL, and mgtS) were substantially upregulated in E. coli B2 (Fig. 5b), which were consistent with our previous findings (Fig. 3). To verify the transcriptome results, we first analyzed the changes in bacterial respiration levels after LI14 treatment using the oxygen-sensitive dye resazurin. In agreement with transcriptome results, we found that LI14 distinctly improved bacterial respiration levels in MRSA T144, while there was no significant change in E. coli B2 (Fig. 5c, d). A dose-dependently increase of intracellular ATP levels in bacteria after exposure to LI14 was also found (Fig. 5e, f). These findings are supported by a recent study, which reported that the efficiency of bactericidal agents is usually linked to bacterial cellular respiration and the over-production of ATP levels41. Accelerated respiration and enhanced metabolism will inevitably lead to the accumulation of toxic products, so we further analyzed the production of ROS, which is an important indicator of bactericidal antibiotics42,43. Like many bactericidal antibiotics, LI14 dose-dependently promoted the accumulation of intracellular ROS (Fig. 5g, h), thereby exacerbating membrane damage. By contrast, the supplementation of ROS scavenger N-acetyl-L-cysteine (NAC)44 drastically abolished the antibacterial activity of LI14, indicating that the formation of ROS by LI14 is an important factor for its bactericidal activity (Supplementary Fig. 7). To further verify these findings, we conducted gene knockout on metabolism-related genes using a reference strain E. coli MG1655 that is easily genetically manipulated. Interestingly, we found that the citrate synthase (gltA)-deficient and cytochrome bd-I ubiquinol oxidase subunit II (cydB)-deficient MG1655 displayed increased susceptibility to LI14 peptide (Fig. 5i), implying that the antibacterial activity of LI14 is associated with bacterial metabolism. In addition, the deletion of katE, an antioxidant gene required for catalase activity (Fig. 5i), improved the inhibitory effect of LI14, highlighting the important role of oxidative damage. Taken together, our results suggest that LI14 peptide triggers membrane damage, dissipates PMF, and perturbs bacterial metabolism, thereby resulting in the accumulation of toxic products and bacterial death (Fig. 5j).
LI14 peptide sensitizes clinically relevant antibiotics and is efficacious in vivo
Recently, combination therapy, especially antibiotic adjuvants, has been widely studied to alleviate the crisis of antibiotic resistance45,46,47. We evaluated the potential synergistic activity of LI14 peptide with a set of clinically relevant antibiotics. Interestingly, we found that LI14 effectively potentiated multi-classes of antibiotics including ciprofloxacin, doxycycline, vancomycin, rifampicin against MDR E. coli B2 (FICI, 0.078 to 0.25), and tigecycline against tet(X4)-positive E. coli B3-1 with a FICI of 0.125 (Supplementary Fig. 8 and Supplementary Table 5). Similar potentiating effects were also observed in sensitive E. coli ATCC 25922 (Supplementary Fig. 9 and Supplementary Table 6). For notorious MRSA T144, LI14 peptide remarkably enhanced the activity of ampicillin and doxycycline with a FICI of 0.078 and 0.188, respectively (Supplementary Fig. 10 and Supplementary Table 7). The strong synergistic effect with ampicillin was consistent with transcriptome results, which showed that LI14 supplementation markedly reduced beta-lactam resistance (Supplementary Fig. 6). These results highlight the potency of LI14 as a novel broad-spectrum antibiotic synergist.
Considering that the LI14 peptide exhibited potent antibacterial and synergistic activity in vitro, we next evaluated the in vivo efficacy of LI14 alone or in combination with ampicillin/rifampicin in various animal infection models. In the Galleria mellonella infection model, the larvae in the control group all died during 48–72 h, while the survival rate of the larvae was significantly improved with the increasing doses of LI14 (Fig. 6a, b). In particular, the survival rate of larvae was 100% and 75%, respectively, in MRSA T144 and E. coli B2 infected groups at 50 mg/kg of LI14. Moreover, compared with the antibiotic administration alone group, the survival of larvae in combination groups was remarkably enhanced to 50% in two bacterial infected groups. Next, we verified the in vivo efficacy of LI14 by constructing a neutropenic mouse thigh infection model infected with MRSA T144 or E. coli B248. Encouragingly, in both MRSA T144 and E. coli B2 infected mice, we observed that LI14 significantly decreased bacterial loads in the thigh of mice, with ~2-log10 at 10 mg/kg and 4-log10 at 20 mg/kg reductions in CFUs compared with vehicles (Fig. 6c, d). Also, the combinations of LI14 with ampicillin or rifampicin exhibited more potent CFUs reduction of two pathogens compared with the antibiotic alone group. Last, the efficacy of LI14 was assessed using an ex vivo wounded mouse skin infection model. As shown in Supplementary Fig. 11, either MRSA T144 or E. coli B2 induced infections, LI14 all distinctly improved wound closure and decreased the number of colonies in a dose-dependent manner during 8 days. Furthermore, H.E. staining showed that the granulation tissues were much thicker in the LI14 or combination group, and LI14 also attenuated the congestion and inflammatory cell infiltration, indicating that LI14 may decrease the systemic inflammatory response induced by local infection. Together, these results indicate that LI14 peptide is highly effective against in vivo bacterial infections caused by MDR pathogens.
Discussion
Antibiotics, as one of the highly successful drugs, have saved millions of lives in the past decades. However, due to their long-term and extensive use, there is a rapid rise in bacterial resistance to existing antibiotics, especially for the Gram-negative members of the ESKEPE panel. There is an urgent need for the development of new antibiotic candidates with new scaffolds, unique mechanisms of action, and low propensity to develop resistance. Here, we reported a panel of new peptide compounds with heptapeptide repeat sequence and its derivatives. Interestingly, we found that LI14 with a novel lead structure was highly effective against all tested MDR Gram-positive and Gram-negative pathogens, including MRSA and E. coli B2 co-harboring mcr-1 and blaNDM-5, implying the broad-spectrum bactericidal activity of LI14. Moreover, LI14 showed tolerance against high concentrations of serum and pepsin, and displayed low toxicity both in vitro and in vivo. Mechanistic studies indicated that LI14 was a bacterial membrane-targeted compound, which induced membrane damage, dissipated membrane potential and led to bacterial metabolism perturbation. Most importantly, LI14 peptide was efficacious in multiple animal models of infections caused by MDR pathogens, indicating that LI14 is a promising candidate for further development as a novel antibiotic.
Amphiphilicity, ɑ-helicity and appropriate peptide chain length are key factors for AMP activity49. In our study, LI7 showed very weak antibacterial activity against most of tested strains, which may be due to the short length of peptide chains that can not to form a secondary structure. Compared with LI7 and LI21, LI14 exhibited the best antibacterial activity. Furthermore, LI14-A6 was modified by substituting Arg with Ala at position 6, and had a lower ɑ-helicity proportion and displayed no antibacterial activity, which was consistent with the previous notion that ɑ-helicity is one of the prerequisites for the activity of AMPs50. Moreover, stability and safety are also the prerequisites for the application of AMPs51,52. Our data showed that LI14 was still effective under different physiological conditions, such as acid and alkali conditions, serum and pepsin, and had no detectable toxicity. This is in stark contrast to some previously reported peptide antibiotics, for example, LL-37 displayed strong activity in MHB broth medium whereas serum fully abolished its activity with a greater than 128-fold change of MIC value28.
Biofilms and persister cells are important causes of chronic and recurrent infections53,54, yet are usually overlooked in the screening of new antibiotics. We found that LI14 was able to inhibit the formation of biofilms and eliminate the mature biofilms. Furthermore, persister cells are usually in a dormant status and highly resistant to antibiotics, which poses a serious challenge to antibiotic therapy. It was reported that acyldepsipeptide 4 (ADEP4) could effectively eliminate persister cells but along with rapid resistance development in S. aureus55. Here, we showed that LI14 had an above 99% clearance rate against MRSA T144 and E. coli B2 persisters within 2 h.
Screening of novel antibacterial agents that target bacterial membranes is a very promising strategy, as membrane-targeting antibiotics usually have rapid bactericidal activity56,57 and have less prone to develop antibiotic resistance as bacterial membrane can hardly spontaneous mutation without loss of function58. For example, the broad-spectrum adjuvant SLAP-S25 exhibited synergistic activity by targeting the PG in the membrane30. In our study, we found that LI14 could target the LPS of the outer membrane and PG of the inner membrane, and finally induce membrane damage. The damage of biophysical integrity by LI14 was accompanied by a series of physiological changes, including increased membrane permeability, disrupted PMF, bacterial metabolic disorder and the leakage of cytoplasmic contents. It is noteworthy that the dissipation of PMF plays an important role in the lethality of LI14, which impairs the basic functions of bacteria and accelerates its death. A new broad-spectrum antibiotic termed halicin was recently identified utilizing a deep learning method, which selectively disrupts the ΔpH component of the PMF26. Furthermore, as potential modulators of PMF, compounds I1-I3 and D1-D3 showed a lethal effect against MRSA T144 by inhibiting electron transport and ATP production38. In our study, we found that LI14 dissipated the ΔΨ component of PMF in both Gram-positive and Gram-negative bacteria. These findings underscore that bacteria PMF can serve as a potential target for the development of novel antimicrobial agents. Furthermore, LI14 resulted in metabolic perturbations, increased ATP levels and the accumulation of toxic products. There is growing evidence that bacterial metabolism is linked to antibiotic efficacy10,59. For instance, a recent study revealed that stress-induced changes in ATP utilization and demand, as a homeostatic response, severely drive lethal metabolic alterations60.
In conclusion, we report that LI14 peptide is an excellent membrane-targeted antibiotic candidate to combat recalcitrant infections elicited by MDR pathogens because of its broad-spectrum antibacterial, anti-biofilms and persisters activity; its low resistance development and toxicity, high stability, as well as its systemic efficacy in animal models of infection. In addition, our study highlights the importance of PMF disruption and metabolic perturbation, providing new insights into the mechanisms of action of AMPs.
Methods
Peptide synthesis and validation
In this study, solid-phase methods were used to synthesize the engineered peptides by GL Biochem (Shanghai, China). We determined the molecular weights of peptides using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). In addition, reversed-phase high-performance liquid chromatography (RP-HPLC) was used to assess peptide purity and retention time. Using the HeliQuest website (www.heliquest.ipmc.cnrs.fr/cgi-bin/ComputParamsV2.py), the hydrophobic moment and charge of all peptides were calculated.
Bacterial strains and chemical reagents
Supplementary Table 1 contains a list of all strains used in this study. By using suicide plasmid pLP12 and homologous recombination, deletion mutants of Escherichia coli MG1655 were obtained followed by PCR confirmation. The bacterial strains were cultured on Mueller-Hinton Broth (MHB) or Mueller-Hinton Agar plates (MHA) at 37 °C, unless otherwise noted. The antibiotics used in this study were obtained from China Institute of Veterinary Drug Control. Other chemical compounds were obtained from TCI. (Shanghai, China).
Animal studies and ethical statement
We obtained female CD-1 mice (aged 8 weeks; 20–25 g) and rats (6–8-week-old) from Comparative Medicine Center of Yangzhou University. Prior to infection studies, all the mice were fed under standardized environmental conditions for one week. In this research, all animal experiments were carried out according to the guidelines of Jiangsu Laboratory Animal Welfare and Ethical of Jiangsu Administrative Committee of Laboratory Animals. Each animal study was approved by Jiangsu Laboratory Animals Administrative Committee, and all protocols were accompanied by a permission number (SYXKSU-2007-0005). The laboratory animal usage license number is SCXK-2017-0044, certified by the Jiangsu Association for Science and Technology.
Antibacterial and bactericidal activity tests
Broth microdilution assay
An antimicrobial activity study was conducted on all peptides against a panel of laboratory bacteria, including ATCC source and clinical isolates with resistance determinants. According to CLSI2021 guidelines, we tested the minimum inhibitory concentrations (MICs) of peptides using standard broth micro-dilutions. Briefly, bacteria grown to exponential phase were diluted in 1:1000 to MHB, subsequently, equivalent amounts of bacterial suspension (1.5 × 106 CFUs/mL) were mixed with different concentrations of peptides in a sterilized 96-well microtiter plate (Corning). MIC values were calculated after 16 to 18 h of incubation at 37 °C based on the lowest concentrations of peptides that did not show visible bacterial growth37.
Checkerboard assays
Through checkerboard assay using two-fold serially diluted drugs (8 × 8 matrix), we evaluated the synergistic effects of LI14 with different mechanisms of antibiotics. The absorbance of cultures at 600 nm was determined by a Microplate reader after 18 h of incubation with (1.5 × 106 CFUs/mL) bacterial suspension. The FIC index (FICI) was calculated by performing two biological replicates for each combination. The formula is as follows: FIC index = FICIa + FICIb = MICab/MICa + MICba/Mb. An FIC index of ≤0.5 indicates synergy48.
Time-killing assay
Bacteria from the exponential phase were diluted into MHB at 1:1,000, and bacteria suspensions (~105 CFUs/mL for Gram-positive bacteria, ~106 CFUs/mL for Gram-negative bacteria) were mixed with various concentrations of LI14 peptide and incubated at 37 °C for 0.5, 1, 2, 4, and 12 h, respectively26. At intervals, samples were serially diluted ten-fold and plated on MHA plates. The amount of primary CFUs/mL was determined after overnight incubation of bacterial colonies.
Prevention of biofilm formation
LI14 peptide was tested for its effect on biofilm formation as previously described61. Briefly, 106 CFUs/mL bacteria suspension was incubated with sub-MIC concentrations of LI14 (0–4 μg/mL) for 36 h under 37 °C. Next, planktonic bacteria were removed, and biofilms were first fixed with methanol for 15 min and then stained with 0.1% crystal violet for 15 min, followed by washing, and 33% acetic acid was applied to solubilize the biofilms. At 570 nm, the absorbance of cell cultures was measured to determine biofilm creation.
Treatment of established biofilms
In MHB medium, a mid-logarithmic growth-phase culture was diluted to 106 CFUs/ml. A 96-well flat bottom plate was filled with 100 μL of this bacterial suspension per well, which was cultured at 37 °C for 36 h to create mature biofilms62. The planktonic bacteria were then discarded, and the remaining biofilm cells were cultured at 37 °C for 2 h with escalating doses of LI14 (0–128 μg/mL). Plates were sonicated for 10 min after incubation to remove adhering bacteria, and the number of live bacteria was counted microbiologically.
Bactericidal activity against persisters
Briefly, the bacteria suspensions after washing were exposed to 50-fold MIC concentrations of vancomycin and tigecycline, respectively, and co-incubation for 4 h to obtain persister cells61. After the removal of planktonic bacteria, the bacterial solution was exposed to different concentrations of LI14 peptide (0–128 μg/mL) for another 6 h incubation. Subsequently, the primary CFUs/mL were calculated.
Resistance development study
The ability of LI14 peptide to induce resistance was studied as previously described63. Resistance to the therapeutically important drugs rifampicin and ciprofloxacin was measured using S. aureus ATCC 29213 and E. coli ATCC 25922 as test strains. The middle and final MICs were monitored after eighty such serial passages exposed to the tested medicines (0.5-fold MIC), and the fold change in MIC increase was recorded.
Stability analysis
Salt and serum stability
MRSA T144 and E. coli B2 in the exponential growth phase were incubated with LI14 peptide supplemented with 10 mM Na+, K+, Mg2+, 10% Dulbecco’s modified Eagle medium (DMEM), and 10% fetal bovine serum (FBS) for 16–18 h. The stability of LI14 was evaluated by the change of its antibacterial activity under different conditions.
Thermal, pH, and proteolytic stability
LI14 were preincubated for 1 h at various temperatures (40–121 °C), pH (2–12), and proteases (pepsin, trypsin, and papain, final concentration 1 mg/mL). After pH treatment, samples were adjusted to pH = 7.2 and MIC assays were used to detect the residual antibacterial activity. Following the incubation with the proteases, the leftover protease was precipitated with acetonitrile and removed by centrifugation at 3000 × g, followed by a MIC test.
Safety evaluation
Hemolysis activity
The hemolytic rate of LI14 peptide was examined using sterile defibrated sheep erythrocytes in line with a preceding study40. Simply speaking, 8% sheep erythrocytes were prepared and incubated with serial-concentration of LI14 peptide (0–128 μg/mL) under 37 °C for 1 h, sterile PBS serving as blank control and ddH2O serving as a positive control. After incubation, an Infinite M200 Microplate reader (Tecan) was used to detect the absorbance of the supernatant at 576 nm, and the hemolysis rate was estimated based on the controls.
Acute toxicity in mice
LI14 (10 mg/kg, body weight) was intra-peritoneally injected into CD-1 mice (n = 4 biologically independent animals per group) every day for 6 days64. Mice were weighed daily and the behaviors of the mice were inspected for one week. Blood from mice was collected on the seventh day for whole-blood cell analysis and kidney chemistry profile. At the same time, the heart, liver, spleen, lung, and kidney of mice were collected for H.E. staining.
CD spectrum assay
Peptides at a final concentration of 0.1 mg/mL were respectively dissolved in 0.01 M PBS (pH = 7.2), 50 μM LPS, 50 mM SDS, and 50% trifluoroethanol (TFE). J-810 spectropolarimeter (Jasco, Tokyo, Japan) was used to measure CD values with a spectrum of from 190 to 300 nm at 25 °C.
Antibacterial mechanisms experiment
SEM and TEM assay
The surface morphology alterations of bacterial cells treated by LI14 peptide were evaluated by scanning electron microscope (SEM). Briefly, overnight cultured bacteria suspensions were cleaned twice and incubated with LI14 peptide (10-fold MIC) at 37 °C for 1 h. The cell pellets were extracted after incubation, washed twice in PBS, and fixed overnight at 4 °C with 2.5% glutaraldehyde. Next, samples were dehydrated by gradient ethanol (30%, 50%, 70%, 90%, and 100%)25. The specimens were then dried, gold-coated, and detected with GeminiSEM 300 (ZEISS, Germany).
The morphological and intracellular changes of bacterial cells following LI14 treatment were examined using a transmission electron microscope (TEM).
Phospholipid inhibition analysis
The impact of exogenous LPS and various kinds of lipids on the activity of LI14 peptide were assessed by the checkerboard microdilution assay. Briefly, lipopolysaccharide (0–128 μg/mL), phosphatidylglycerol (0–16 μg/mL), phosphatidylethanolamine (0–16 μg/mL), cardiolipin (0–16 μg/mL), phosphatidylcholine (0–16 μg/mL) and LI14 peptide were co-incubation with bacterial suspensions in 96-well plate. After 16–18 h incubation, to assay the MICs of LI14 in the presence of LPS and different lipids were recorded.
Outer membrane and cell membrane permeability
The permeability of the bacterial outer membrane and cell membrane was measured using the fluorescent dyes 1-N-phenylnaphthylamine (NPN) and propidium iodide (PI), respectively. Briefly, final concentrations of NPN (10 μM) and PI (5 μM) were incubated with bacterial suspensions for 30 min, subsequently, treated by LI14 (0–128 μg/mL) for 1 h. Then the outer/cell membrane permeability was then measured using an Infinite M200 Microplate reader (Tecan) with excitation/emission wavelengths of 350 nm/420 nm (NPN) and 535 nm/615 nm (PI).
Flow cytometry assay
Bacterial suspensions (106 CFUs/mL) were incubated with LI14 peptide (0–64 μg/mL) for 1 h at 37 °C. Then, PI (5 mM, 3 μL) and SYTO 9 (0.835 mM, 3 μL) were added to the mixture of bacteria and LI14 peptide and incubated for 15 min at room temperature in dark. About 100,000 ungated events were measured by CytExpert Flow Cytometer (Beckman, USA) and analyzed by CytExpert 2.0 software (Beckman, USA)35.
Membrane fluidity assay
The exponential bacterial suspensions were centrifuged and washed with PBS, then bacterial suspensions were incubated with 10 µM Laurdan in dark for 30 min at 37 °C. The stained cell cultures were washed with PBS two times and concentrated. Next, different concentrations of LI14 were mixed with the stained bacterial cells to incubate for another 1 h at 37 °C. The Laurdan fluorescence levels were measured using a Microplate reader (Tecan, Männedorf, Switzerland) with emission wavelengths of 435 nm and 490 nm upon excitation at 350 nm after 1 h incubation in the dark. GP = (I435 – I490)/(I435 + I490)37 was used to determine the Laurdan GP. All experiments were conducted in biological triplicate.
Cytoplasmic membrane potential
The changes of membrane potential treated by LI14 were evaluated using 3,3’-dipropylthiadicarbocyanine iodide (DiSC3(5), 0.5 μM)65. Briefly, bacterial samples were first cultured for 30 min with (DiSC3(5), 0.5 μM) before being treated for 1 h with various doses of LI14 peptide. The excitation wavelength of 622 nm and the emission wavelength of 670 nm was used to detect the bacteria’s dissipated membrane potential.
ΔpH measurement
The exponential bacterial suspensions were centrifuged and washed with PBS, then bacterial suspensions were incubated with a pH-sensitive fluorescence probe BCECF-AM (1 µM)66 in dark for 30 min at 37 °C. Following treated with different concentrations of LI14 peptide for 1 h at 37 °C. The excitation/emission wavelength of 488 nm/535 nm was detected to calculate the fluorescence value.
Swimming motility experiment
0.3% (w/v) agar media containing trypticase peptone (10 g/L), NaCl (10 g/L), and yeast extract (5 g/L) was used to evaluate bacterial swimming motility. Wait until the temperature drops to 50 °C, subinhibitory concentrations of LI14 were added (final concentrations, 0, 1, and 2 μg/mL). In the center of each plate, a volume of 2 μL of bacterial suspensions (106 CFUs/mL) was deposited and allowed it to dry. The swimming motility of the bacteria was evaluated by measuring the microsphere diameter after incubation at 37 °C for 48 h.
Transcriptomic analysis
Early-exponential bacteria (MRSA T144 and E. coli B2) were treated by LI14 peptide (8-fold MIC) for 4 h at 37 °C. The total RNA of samples was extracted using an EASYspin Plus kit (Aidlab, Beijing, China), quantified with a Nanodrop spectrophotometer (Thermo Scientific, MA, USA), and sequenced using the Illumina Hiseq 2000 system (Majorbio, Shanghai, China) after incubation.
Bacterial respiration analysis
The influence of LI14 peptide on bacterial respiration was evaluated by oxygen-sensitive dye resazurin67. In brief, the exponential bacterial suspensions were centrifuged and washed with PBS, then added different concentrations of LI14 peptide (0–128 µg/mL) and constant resazurin (0.1 µg/mL), then dynamically monitored fluorescence change for 1 h with excitation/emission wavelength of 550/590 using the Infinite M200 Microplate reader (Tecan).
Intracellular ATP determination
Using an Enhanced ATP Assay Kit (Beyotime, Shanghai), the intracellular ATP concentrations of MRSA T144 and E. coli B2 were measured. Briefly, the exponential bacterial suspensions were incubated with LI14 peptide ranging from 0 to 16 µg/mL for 1 h. Bacterial centrifugal cleaning and the bacterial pellet were collected. Then, lysis solution was added to lysate bacterial cells. Using the Infinite M200 Microplate reader (Tecan), intracellular ATP levels were calculated from luminescence signals.
ROS measurements
The amounts of ROS in MRSA T144 and E. coli B2 treated with LI14 peptide were measured using 2’,7’-Dichlorodihydrofluorescein diacetate (DCFH-DA, 10 µM). Briefly, bacteria were firstly incubated with a fluorescent probe DCFH-DA (10 µM) at 37 °C for 30 min and then washed with PBS to reduce the influence of extracellular fluorescence, next probed cells were treated with LI14 peptide (0–128 µg/mL) for 1 h. The levels of ROS were evaluated using a Microplate reader (Tecan, Männedorf, Switzerland) to measure fluorescence intensity (λexcitation = 488 nm, λemission = 525 nm).
NAC assay
The significance of ROS in the function of the LI14 peptide was investigated using N-acetyl-L-cysteine (NAC). Briefly, NAC (1, 5, and 10 mM) was added to the mixture of LI14 and bacterial culture. The effects of different concentrations of NAC on bacterial growth exposed to LI14 peptide were analyzed by monitoring bacterial growth curves.
In vivo efficiency
Galleria mellonella infection model
Galleria mellonella larvae (supplied by Huiyude Biotech Company, Tianjin, China) were separated into six groups (n = 8 biologically independent animals per group) and infection models by injecting MRSA T144 and E. coli B2 cultures, respectively (10 µL, 1.0 × 105 CFUs per larvae) into the right posterior gastropoda42,48. The infected larvae were treated by giving LI14 peptide (10, 20, 50 mg/kg), ampicillin/rifampicin (10 mg/kg) or a mixture of LI14 with ampicillin/rifampicin (10 + 10 mg/kg) in the left posterior gastropoda after 1 h infection, with the PBS injection group serving as a control treatment. Within 7 days, survival rates of Galleria mellonella larvae were inspected and recorded.
Neutropenic mouse thigh infection model
Female CD-1 mice (n = 6 biologically independent animals per group) were first given cyclophosphamide (two consecutive injections of 150 and 100 mg kg−1 at 4 and 1 day before infection) to construct neutropenia models. The mice’s right thighs were then injected with 100 μL MRSA T144 or E. coli B2 suspensions (105 CFUs per mouse). Post-infection of 1 h, 100 μL LI14 peptide (10 or 20 mg/kg), ampicillin/rifampicin (20 mg/kg) or a combination of LI14 with ampicillin/ rifampicin (10 + 20 mg/kg) were given by intraperitoneal injection. All mice were euthanized 48 h after drug administration, and right thigh muscle tissue was removed aseptically, homogenized, serially diluted, and plated on MHA to qualify bacterial loads after overnight incubation at 37 °C.
Rat skin wound infection model
The rats (n = 4 biologically independent animals per group) were anesthetized and a 2 cm wound model was constructed on their back. Then, 100 μL of MRSA T144 or E. coli B2 cultures were dropped on the wounds (106 CFUs per mouse), respectively. At 1 h post-infection, 100 μL of LI14 peptide (5 or 10 μg), or the combination of LI14 peptide with ampicillin/rifampicin (5 + 5 μg) were gently inoculated over the scar with a pipette tip, respectively. Wound size was recorded for 8 days, and on the 8th day, the rats were euthanized, and wound tissue was removed aseptically to measure CFUs and for following hematoxylin and eosin (H&E) staining.
Statistics and reproducibility
Statistical analysis was performed using GraphPad Prism version 9.0. All experiments were performed with at least three independent biological replicates and data are presented as mean ± standard deviation (SD). Unless otherwise noted, unpaired t-test between two groups or one-way ANOVA among multiple groups were used to calculate P-values. Significance levels are presented by numbers of asterisks: *P < 0.05, **P < 0.01, ***P < 0.001, and ****P < 0.0001.
Reporting summary
Further information on research design is available in the Nature Research Reporting Summary linked to this article.
Data availability
RNA-sequencing data have been deposited in the National Center for Biotechnology Information (NCBI) Sequence Read Archive (SRA) database (PRJNA825494 and PRJNA825633). Source data for the main figures are provided in Supplementary Data 1. All other data are available from the corresponding authors.
References
O’neill, J. Tackling Drug-resistant Infections Globally: Final Report And Recommendations (Review on Antimicrobial Resistance, 2016).
Ma, Y.-X. et al. Considerations and caveats in combating ESKAPE pathogens against nosocomial infections. Adv. Sci. 7, 1901872 (2020).
De Oliveira, D. M. P. et al. Antimicrobial resistance in ESKAPE pathogens. Clin. Microbiol. Rev. 33, e00181-19 (2020).
Walsh, T. R., Weeks, J., Livermore, D. M. & Toleman, M. A. Dissemination of NDM-1 positive bacteria in the New Delhi environment and its implications for human health: an environmental point prevalence study. Lancet Infect. Dis. 11, 355–362 (2011).
Liu, Y.-Y. et al. Emergence of plasmid-mediated colistin resistance mechanism MCR-1 in animals and human beings in China: a microbiological and molecular biological study. Lancet Infect. Dis. 16, 161–168 (2016).
Sun, J. et al. Plasmid-encoded tet(X) genes that confer high-level tigecycline resistance in Escherichia coli. Nat. Microbiol. 4, 1457–1464 (2019).
He, T. et al. Emergence of plasmid-mediated high-level tigecycline resistance genes in animals and humans. Nat. Microbiol. 4, 1450–1456 (2019).
Donlan, R. M. & Costerton, J. W. Biofilms: survival mechanisms of clinically relevant microorganisms. Clin. Microbiol. Rev. 15, 167–193 (2002).
Koo, H., Allan, R. N., Howlin, R. P., Stoodley, P. & Hall-Stoodley, L. Targeting microbial biofilms: current and prospective therapeutic strategies. Nat. Rev. Microbiol. 15, 740–755 (2017).
Stokes, J. M., Lopatkin, A. J., Lobritz, M. A. & Collins, J. J. Bacterial metabolism and antibiotic efficacy. Cell Metab. 30, 251–259 (2019).
Gollan, B., Grabe, G., Michaux, C. & Helaine, S. Bacterial persisters and infection: past, present, and progressing. Annu. Rev. Microbiol. 73, 359–385 (2019).
Fisher, R. A., Gollan, B. & Helaine, S. Persistent bacterial infections and persister cells. Nat. Rev. Microbiol. 15, 453–464 (2017).
Lazzaro, B. P., Zasloff, M. & Rolff, J. Antimicrobial peptides: application informed by evolution. Science 368, eaau5480 (2020).
Mookherjee, N., Anderson, M. A., Haagsman, H. P. & Davidson, D. J. Antimicrobial host defence peptides: functions and clinical potential. Nat. Rev. Drug Discov. 19, 311–332 (2020).
Magana, M. et al. The value of antimicrobial peptides in the age of resistance. Lancet Infect. Dis. 20, e216–e230 (2020).
Spohn, R. et al. Integrated evolutionary analysis reveals antimicrobial peptides with limited resistance. Nat. Commun. 10, 4538 (2019).
Mahlapuu, M., Björn, C. & Ekblom, J. Antimicrobial peptides as therapeutic agents: opportunities and challenges. Crit. Rev. Biotechnol. 40, 978–992 (2020).
Wang, J. et al. Antimicrobial peptides: Promising alternatives in the post feeding antibiotic era. Med. Res. Rev. 39, 831–859 (2019).
Liu, Y. et al. The revitalization of antimicrobial peptides in the resistance era. Pharmacol. Res. 163, 105276 (2021).
Tan, P., Fu, H. & Ma, X. Design, optimization, and nanotechnology of antimicrobial peptides: From exploration to applications. Nano Today 39, 101229 (2021).
De, A. B. et al. The antimicrobial peptide SAAP-148 combats drug-resistant bacteria and biofilms. Sci. Transl. Med. 10, eaan4044 (2018).
Ma, L. et al. Potent antibacterial activity of MSI-1 derived from the magainin 2 peptide against drug-resistant bacteria. Theranostics 10, 1373–1390 (2020).
Wang, G., Watson, K. M., Peterkofsky, A. & Buckheit, R. W. Jr. Identification of novel human immunodeficiency virus type 1-inhibitory peptides based on the antimicrobial peptide database. Antimicrob. Agents Chemother. 54, 1343–1346 (2010).
Wang, G., Li, X. & Wang, Z. APD3: the antimicrobial peptide database as a tool for research and education. Nucleic Acids Res. 44, D1087–1093 (2016).
Dou, X., Zhu, X., Wang, J., Dong, N. & Shan, A. Novel design of heptad amphiphiles to enhance cell selectivity, salt resistance, antibiofilm properties and their membrane-disruptive mechanism. J. Med. Chem. 60, 2257–2270 (2017).
Stokes, J. M. et al. A deep learning approach to antibiotic discovery. Cell 180, 688–702 e613 (2020).
Balaban, N. Q. et al. Definitions and guidelines for research on antibiotic persistence. Nat. Rev. Microbiol. 17, 441–448 (2019).
de Breij, A. et al. The antimicrobial peptide SAAP-148 combats drug-resistant bacteria and biofilms. Sci. Transl. Med. 10, eaan4044 (2018).
Shi, J. et al. Amphipathic peptide antibiotics with potent activity against multidrug-resistant pathogens. Pharmaceutics 13, 438 (2021).
Song, M. et al. A broad-spectrum antibiotic adjuvant reverses multidrug-resistant Gram-negative pathogens. Nat. Microbiol. 5, 1040–1050 (2020).
Hancock, R. E. & Sahl, H. G. Antimicrobial and host-defense peptides as new anti-infective therapeutic strategies. Nat. Biotechnol. 24, 1551–1557 (2006).
Song, M. et al. Plant natural flavonoids against multidrug resistant pathogens. Adv. Sci. 8, e2100749 (2021).
Lee, E. Y., Fulan, B. M., Wong, G. C. & Ferguson, A. L. Mapping membrane activity in undiscovered peptide sequence space using machine learning. Proc. Natl Acad. Sci. USA 113, 13588–13593 (2016).
Wong, F. et al. Cytoplasmic condensation induced by membrane damage is associated with antibiotic lethality. Nat. Commun. 12, 2321 (2021).
Martin, J. K. 2nd et al. A dual-mechanism antibiotic kills gram-negative bacteria and avoids drug resistance. Cell 181, 1518–1532 e1514 (2020).
Saeloh, D. et al. The novel antibiotic rhodomyrtone traps membrane proteins in vesicles with increased fluidity. PLoS Pathog. 14, e1006876 (2018).
Kim, W. et al. A selective membrane-targeting repurposed antibiotic with activity against persistent methicillin-resistant Staphylococcus aureus. Proc. Natl Acad. Sci. USA 116, 16529–16534 (2019).
Farha, M. A., Verschoor, C. P., Bowdish, D. & Brown, E. D. Collapsing the proton motive force to identify synergistic combinations against Staphylococcus aureus. Chem. Biol. 20, 1168–1178 (2013).
Kurre, R., Kouzel, N., Ramakrishnan, K., Oldewurtel, E. R. & Maier, B. Speed switching of gonococcal surface motility correlates with proton motive force. PLoS ONE 8, e67718 (2013).
Liu, Y. et al. Reversion of antibiotic resistance in multidrug-resistant pathogens using non-antibiotic pharmaceutical benzydamine. Commun. Biol. 4, 1328 (2021).
Lobritz, M. A. et al. Antibiotic efficacy is linked to bacterial cellular respiration. Proc. Natl Acad. Sci. USA 112, 8173 (2015).
Liu, Y. et al. Melatonin overcomes MCR-mediated colistin resistance in Gram-negative pathogens. Theranostics 10, 10697–10711 (2020).
Liu, Y. et al. Gut microbiome alterations in high-fat-diet-fed mice are associated with antibiotic tolerance. Nat. Microbiol. 6, 874–884 (2021).
Halasi, M. et al. ROS inhibitor N-acetyl-L-cysteine antagonizes the activity of proteasome inhibitors. Biochem. J. 454, 201–208 (2013).
Liu, Y., Li, R., Xiao, X. & Wang, Z. Antibiotic adjuvants: an alternative approach to overcome multi-drug resistant Gram-negative bacteria. Crit. Rev. Microbiol. 45, 301–314 (2019).
Brochado, A. R. et al. Species-specific activity of antibacterial drug combinations. Nature 559, 259–263 (2018).
Liu, Y. et al. Drug repurposing for next-generation combination therapies against multidrug-resistant bacteria. Theranostics 11, 4910–4928 (2021).
Liu, Y. et al. Metformin restores tetracyclines susceptibility against multidrug resistant bacteria. Adv. Sci. 7, 1902227 (2020).
Fjell, C. D., Hiss, J. A., Hancock, R. E. & Schneider, G. Designing antimicrobial peptides: form follows function. Nat. Rev. Drug Discov. 11, 37–51 (2012).
Lai, Z. et al. Highly stabilized alpha-helical coiled coils kill gram-negative bacteria by multicomplementary mechanisms under acidic condition. ACS Appl. Mater. Interfaces 11, 22113–22128 (2019).
Yang, Z. et al. Rational design of short peptide variants by using Kunitzin-RE, an amphibian-derived bioactivity peptide, for acquired potent broad-spectrum antimicrobial and improved therapeutic potential of commensalism coinfection of pathogens. J. Med. Chem. 62, 4586–4605 (2019).
Zhu, Y. et al. Rational avoidance of protease cleavage sites and symmetrical end-tagging significantly enhances the stability and therapeutic potential of antimicrobial peptides. J. Med. Chem. 63, 9421–9435 (2020).
Yan, J. & Bassler, B. L. Surviving as a community: antibiotic tolerance and persistence in bacterial biofilms. Cell Host Microbe 26, 15–21 (2019).
Defraine, V., Fauvart, M. & Michiels, J. Fighting bacterial persistence: current and emerging anti-persister strategies and therapeutics. Drug Resist. Updat. 38, 12–26 (2018).
Conlon, B. P. et al. Activated ClpP kills persisters and eradicates a chronic biofilm infection. Nature 503, 365–370 (2013).
Dias, C. et al. Sugar-based bactericides targeting phosphatidylethanolamine-enriched membranes. Nat. Commun. 9, 4857 (2018).
Lewis, K. The science of antibiotic discovery. Cell 181, 29–45 (2020).
Mishra, B., Lakshmaiah Narayana, J., Lushnikova, T., Wang, X. & Wang, G. Low cationicity is important for systemic in vivo efficacy of database-derived peptides against drug-resistant Gram-positive pathogens. Proc. Natl Acad. Sci. USA 116, 13517–13522 (2019).
Liu, Y., Li, R., Xiao, X. & Wang, Z. Bacterial metabolism-inspired molecules to modulate antibiotic efficacy. J. Antimicrob. Chemother. 74, 3409–3417 (2019).
Yang, J. H. et al. A white-box machine learning approach for revealing antibiotic mechanisms of action. Cell 177, 1649–1661.e1649 (2019).
Mwangi, J. et al. The antimicrobial peptide ZY4 combats multidrug-resistant Pseudomonas aeruginosa and Acinetobacter baumannii infection. Proc. Natl Acad. Sci. USA 116, 26516–26522 (2019).
Silva, O. N. et al. Repurposing a peptide toxin from wasp venom into antiinfectives with dual antimicrobial and immunomodulatory properties. Proc. Natl Acad. Sci. USA 117, 26936–26945 (2020).
Ling, L. L. et al. A new antibiotic kills pathogens without detectable resistance. Nature 517, 455–459 (2015).
Lakshmaiah Narayana, J. et al. Two distinct amphipathic peptide antibiotics with systemic efficacy. Proc. Natl Acad. Sci. USA 117, 19446–19454 (2020).
Liu, Y. et al. Potent broad-spectrum antibacterial activity of amphiphilic peptides against multidrug-resistant bacteria. Microorganisms 8, 1398 (2020).
Jia, Y. et al. Melatonin prevents conjugative transfer of plasmid-mediated antibiotic resistance genes by disrupting proton motive force. Pharmacol. Res. 175, 105978 (2022).
Hall, C. W., Farkas, E., Zhang, L. & Mah, T.-F. Potentiation of aminoglycoside lethality by C4-dicarboxylates requires RpoN in antibiotic-tolerant Pseudomonas aeruginosa. Antimicrob. Agents Chemother. 63, e01313–01319 (2019).
Acknowledgements
This work was supported by the National Key Research and Development Program of China (2021YFD1801000 and 2018YFA0903400), National Natural Science Foundation of China (32222084, 32002331, and 32172907), Jiangsu Agricultural Science and Technology Innovation Fund (CX(21)2010), Jiangsu Postgraduates Scientific Research Innovation Project (KYCX22-3538), Yangzhou city and Yangzhou University corporation (YZ2021161), A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD), and Young Elite Scientists Sponsorship Program by CAST (2020QNRC001).
Author information
Authors and Affiliations
Contributions
Y.L. and Z.W. designed and supervised the project. J.S. performed experiment, analyzed data, and drafted the manuscript. C.C. helped perform experiments. D.W. helped analyze data. Y.L. wrote and revised the manuscript. All of the authors read and approved the final manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Communications Biology thanks the anonymous reviewers for their contribution to the peer review of this work. Primary Handling Editors: Zhijuan Qiu and Luke Grinham.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Shi, J., Chen, C., Wang, D. et al. The antimicrobial peptide LI14 combats multidrug-resistant bacterial infections. Commun Biol 5, 926 (2022). https://doi.org/10.1038/s42003-022-03899-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s42003-022-03899-4
- Springer Nature Limited
This article is cited by
-
Synergistic collaboration between AMPs and non-direct antimicrobial cationic peptides
Nature Communications (2024)
-
Expression and characterization of the new antimicrobial peptide AP138L-arg26 anti Staphylococcus aureus
Applied Microbiology and Biotechnology (2024)
-
Beta-defensin1 derived from Ctenopharyngodon idella exerts anti-Vibrio mimics effects in vitro and in vivo via a multi-target mechanism of action
Aquaculture International (2024)