Abstract
In non-centrosymmetric metals, spin-orbit coupling induces momentum-dependent spin polarization at the Fermi surfaces. This is exemplified by the valley-contrasting spin polarization in monolayer transition metal dichalcogenides with in-plane inversion asymmetry. However, the valley configuration of massive Dirac fermions in transition metal dichalcogenides is fixed by the graphene-like structure, which limits the variety of spin-valley coupling. Here, we show that the layered polar metal BaMnX2 (X = Bi, Sb) hosts tunable spin-valley-coupled Dirac fermions, which originate from the distorted X square net with in-plane lattice polarization. We found that BaMnBi2 has approximately one-tenth the lattice distortion of BaMnSb2, from which a different configuration of spin-polarized Dirac valleys is theoretically predicted. This was experimentally observed as a clear difference in the Shubnikov-de Haas oscillation at high fields between the two materials. The chemically tunable spin-valley coupling in BaMnX2 makes it a promising material for various spin-valleytronic devices.
Similar content being viewed by others
Introduction
In crystals with broken inversion symmetry, the spin–orbit coupling (SOC) results in a spin- and momentum-dependent splitting of the energy bands. In 2D electron gases with structural inversion asymmetry, this leads to spin-momentum locking on the Fermi surface whose type is determined by the relative direction between the 2D plane and the internal electric field due to the asymmetric potential gradient. At surfaces and interfaces of heterostructures, for instance, the electric field is generated perpendicular to the 2D plane. This results in Rashba-type spin splitting and leads to a momentum-dependent in-plane helical spin polarization1,2,3,4. More recently, giant Rashba-type spin splitting was also found in bulk materials, such as th`e layered polar semiconductors BiTeI5 and GeTe6, in which novel transport7 and optical properties8 associated with spin-momentum locking have been experimentally observed.
In 2D systems with in-plane inversion asymmetry, on the other hand, an out-of-plane Zeeman-like field is induced by the SOC, the sign of which switches depending on the position in momentum space. When the Fermi pockets (i.e., electronic valleys) are centered at low-symmetry points, spin-valley coupling occurs and provides a platform for exploring the novel spin physics and spintronic applications associated with the valley degree of freedom. A promising system for this is the family of monolayer transition metal dichalcogenides (TMDCs) such as MoS2, which has been attracting significant interest. The trigonal prismatic layer of a TMDC consists of a transition metal plane sandwiched between two chalcogen planes9. The prismatic layer is regarded as a graphene-like material with different A- and B-site atoms that break the inversion symmetry. Therefore, the electron and hole valleys located at the K and K′ points are well described by massive Dirac fermions exhibiting valley-contrasting spin polarization perpendicular to the 2D plane10,11,12,13. Such spin-valley coupling has indeed been demonstrated through its distinctive optical and transport properties, such as valley-dependent circular dichroic photoluminescence14,15,16 and nonreciprocal charge transport17.
To further explore these novel physical properties, it is necessary to control a variety of spin-valley-coupled states. For this, it is important to realize the states in the bulk form of the TMDCs as well as in the thin film form. In the former, chemical substitution can be used to tune the physical parameters determining the spin-valley coupling such as the magnitudes of the SOC and internal electric field. However, the spin-valley coupling is suppressed in the most common bulk phase of MoS2 (so-called 2H polytype) because the inversion symmetry is restored9. Instead, another polytype (so-called 3R) with a non-centrosymmetric layer stacking needs to be stabilized by carefully optimizing the crystal growth18. Furthermore, in principle, the valley positions in the TMDCs are fixed at the corners of the hexagonal Brillouin zone (the K and K′ points)12,13, reflecting the graphene-like structure. Such structural restrictions may hamper the wide-range control of the spin-valley coupling in TMDC-related materials.
Recently, the layered Dirac material BaMnSb2 was found to have a polar structure with broken in-plane inversion symmetry in the bulk form19,20. BaMnSb2 belongs to the AMnX2 (A: alkaline earth, X: Bi, Sb) series of compounds21,22,23,24,25,26,27, in which each compound consists of a A2+-Mn2+-X3− blocking layer and a X− Dirac fermion layer (see Fig. 1a). Since the former layer is an antiferromagnetic insulator with a Néel temperature around room temperature21,22,23,26,27,28,29,30, the quasi-2D Dirac fermion states are formed in the bulk form. For the layer stacking with a coincident arrangement of the A-sites above and below the X− layer, the X− layer tends to form a square net, leading to a non-polar tetragonal structure21,22,23,24,25. However, in BaMnSb2, the Sb− layer is slightly distorted to an orthorhombic one with zig-zag chains, leading to lattice polarization along the plane. Together with the SOC of Sb, this results in the formation of two Dirac valleys with valley-contrasting out-of-plane spin polarizations around the Y point, as was revealed by first-principles calculation and angle-resolved photoemission spectroscopy19.
Taking advantage of the bulk layered structure, it is anticipated that the spin-valley-coupled Dirac fermion states in BaMnSb2 can be widely tuned by chemical substitution. In particular, control of the SOC magnitude is most important as the primary determinant of the spin-valley coupling. For this purpose, the substitution of Sb with Bi in the Dirac fermion layer is a promising approach. However, it has been reported in the literature31 that BaMnBi2 has a non-polar tetragonal structure (I4/mmm) on the basis of powder X-ray diffraction. In contrast, by performing synchrotron X-ray diffraction and optical measurements on BaMnBi2 single crystals, we find here that BaMnBi2 has a polar orthorhombic structure similar to that of BaMnSb2. Reflecting the large difference in the orthorhombicity and SOC between the two materials, our first-principles calculation predicts that the configurations of the spin-polarized Dirac valleys are totally different between the two materials; BaMnBi2 has multiple valleys around the X and Y points. This is consistent with the complicated behavior of the Shubnikov–de Haas (SdH) oscillation observed at high fields in BaMnBi2.
Results
Polar crystal structure
The crystal structure of BaMnBi2 (Fig. 1a) was determined by single-crystal X-ray structural analysis (for details see Methods, Supplementary Methods, and Supplementary Table 1). The obtained result shows that BaMnBi2 has a polar orthorhombic structure with the same space group as BaMnSb2 (Imm2), whereas the orthorhombicity (c − a)/a is estimated to be ~0.15%, which is only 1/10 that of BaMnSb2 (~1.3%)19. Despite such a small orthorhombicity, twin domains are clearly observed with a polarized microscope at room temperature (>290 K), as shown in Fig. 1b. Therefore, the polar structure is stable irrespective of the antiferromagnetic order of Mn sublattice, which sets in at TN = 290 K31. Among the X = Bi compounds, all of which are known to have the Bi square-net structure21,22, BaMnBi2 is the only exception that has Bi zig-zag chains accompanied by in-plane lattice polarization along the c-axis.
To verify the polar lattice structure directly, we measured the optical second harmonic generation (SHG), i.e., the frequency doubling of the probing light wave (Fig. 1c), in BaMnBi2 single crystals at room temperature. SHG is particularly useful for detecting polar states because, to leading order, SHG occurs only in non-centrosymmetric media. Figure 1d shows the rotational anisotropy of the SHG intensity from a nearly single-domain region on a cleaved surface. The rotational anisotropy was obtained by projecting the component of the SHG light oriented parallel to the polarization ϕ of the incident fundamental light while ϕ was rotated over 360∘. A clear twofold rotation anisotropy with peaks at ϕ ~90∘ and 270∘ was observed despite the small orthorhombicity. The data is well fitted by assuming the mm2 symmetry with in-plane lattice polarization along the c-axis (solid curve in Fig. 1d, see Supplementary Methods, and Supplementary Fig. 1 for details), which is consistent with the results of the structural analysis.
Similar optical properties associated with polar lattice distortions have also been observed in BaMnSb220. However, it should be noted that the orthorhombicity of BaMnBi2 is much smaller than that of BaMnSb2 (~1/10) while the SOC of Bi is stronger than that of Sb. Because the spin-splitting of the Dirac bands depends on the magnitudes of the polar lattice distortion and the SOC, the spin-valley coupling may significantly differ between these two materials. To demonstrate this, we calculated the band structure of BaMnBi2 based on the experimentally obtained crystal structure.
Electronic structure
The calculated band structure of BaMnBi2 is shown in Fig. 2a. Two sharp Dirac-like bands accompanied by significant spin splitting are formed near the X and Y points (shaded regions in Fig. 2a). We show in Fig. 2b, the spin-resolved Fermi surfaces at the Fermi energy ϵF = 0 eV. All the Fermi surfaces are 2D cylindrical, consistent with the large resistivity anisotropy ρzz/ρxx ~100 observed over the measured temperatures (see Supplementary Fig. 2), where ρxx and ρzz are the in-plane and interlayer resistivities, respectively. Dirac bands form two- and four-electron valleys (named β and α) around the X and Y points, respectively. Each valley is spin-polarized because one of the spin-split Dirac bands crosses ϵF. Because of the lattice polarization along the c-axis, the spin polarization of sz switches sign with respect to the Γ-Y line32; up-spin (red) and down-spin (blue) occur kx > 0 and kx < 0, respectively. This kx-dependent sz polarization (so called Zeeman-type spin splitting) is qualitatively explained by the SOC Hamiltonian HSOC ∝ σ ⋅ (k × E) = σzkxEy, where σ = (σx, σy, σz) is the vector of spin Pauli matrices and E = (0, Ey, 0) is the internal electric field. In Fig. 2d, f, we show the detailed band dispersion along the ky = 0.8π/c and the ky = 0 lines that are located at the centers of the α and β valleys, respectively. In both valleys, the magnitude of the spin-splitting (typically 200–300 meV as indicated by vertical arrows) is much larger than the energy gap at the Dirac points (~50 meV), resulting in spin-polarized nearly-massless Dirac bands. From the calculation, it is predicted that hole valleys also appear on the Γ-M line in a similar fashion to the Bi square-net analogs33,34,35. However, in BaMnBi2, the corresponding bands have a large band gap (~250 meV) due to the lattice distortion (Fig. 2e). Furthermore, in experiments, the Hall resistivity ρyx has a negative slope with respect to the field, indicating that electron-type carriers are dominant in BaMnBi2 (Fig. 3c). Therefore, it is plausible that the valence bands along the Γ-M line do not cross ϵF in reality. Thus, the obtained Dirac valleys (α and β) for BaMnBi2 are totally different from those for BaMnSb2; the latter hosts only two equivalent valleys near the Y point along each M-Y line19,20. This suggests that the spin-valley coupling of the Dirac fermions in BaMnX2 is highly sensitive to the lattice distortion and the SOC.
Quantum oscillation reflecting spin-polarized Dirac fermions
To reveal this unique spin-valley coupling through the transport properties, we performed magnetoresistivity measurements with pulsed high magnetic fields of up to ~56 T. ρzz (Fig. 3a) and ρxx (Fig. 3b) exhibit positive magnetoresistance, on which clear SdH oscillations are superimposed at low temperatures (below ~70 K). To clarify the Landau level (LL) structure, we here analyze the SdH oscillation in the conductivity tensors. In the inset to Fig. 3d, we plot the in-plane conductivity \({\sigma }_{{\mathrm{xx}}}={\rho }_{{{{\mathrm{xx}}}}}/({\rho }_{{\mathrm{xx}}}^{2}+{\rho }_{{\mathrm{yx}}}^{2})\) and interlayer conductivity σzz = 1/ρzz as a function of BF/B, where BF is the SdH frequency and BF/B corresponds to the filling factor normalized by the spin-valley degeneracy factor19,36. Importantly, the SdH oscillations of σxx and σzz resemble each other well, including the fine structures at high fields (BF/B < 0.5). Therefore, both SdH oscillations directly reflect the density of states in the LLs. In the following, we use σzz for the detailed analysis owing to the higher S/N ratio and clearer oscillations even at low fields.
In Fig. 3d, we plot −d2σzz/d(1/B)2 vs 1/B, where the oscillation nearly consists of a single frequency at 1/B ≥ 0.05 T−1. From the Lifshitz–Kosevich equation, the oscillation component is given by37,38
where γ is the Berry phase. Following this equation, we obtained the linear fan diagram (Fig. 3e) by indexing the integer (half-integer) N to the peaks (dips). The gradient corresponds to the frequency BF1 ( = 12.9 T). The vanishing N-intercept ( = 0.01) indicates the non-trivial Berry phase γ = π consistent with the nearly massless Dirac bands (Fig. 2d, f). Note that at 1/B < 0.05 T−1 corresponding to the zeroth LL, additional structures (vertical arrows in Fig. 3d) appear, which cannot be explained by the extrapolation of the low-field LLs (N > 1). We will discuss the origin of these complicated LLs in the quantum limit later.
The application of magnetic fields should lift the degeneracy of the equivalent valleys with opposite spin polarizations because of the Zeeman energy ϵZ = g*μBB, where g* is the effective g factor and μB is the Bohr magneton. However, no clear splitting is observed in the SdH oscillation for N ≥ 1 (Fig. 3d). In 2D systems, the ratio of ϵZ to the cyclotron energy \({\epsilon }_{{\mathrm{c}}}=e\hslash B\cos \theta /{m}_{{\mathrm{c}}}\) is given by \({\epsilon }_{{\mathrm{Z}}}/{\epsilon }_{{\mathrm{c}}}={g}^{* }({m}_{{\mathrm{c}}}/2{m}_{0})\cos \theta\), where mc is the cyclotron mass, m0 is the bare electron mass, and θ is the tilt angle from the normal to the 2D plane. This shows that the spin splitting is enhanced by increasing θ, which leads to the variation of the amplitude and phase of the SdH oscillation with θ. However, this is not the case in BaMnBi2. Figure 4 shows σzz plotted against \(1/B\cos \theta\). The oscillation period is almost constant for all values of θ up to 77∘ (as shown by vertical dotted lines), reflecting the cylindrical quasi-2D Dirac valleys. In addition, the amplitude and phase of the SdH oscillation are almost unchanged upon θ without any enhancement of the splitting, indicating that ϵZ/ϵc independent of θ, i.e., \({\epsilon }_{{\mathrm{Z}}}\propto B\cos \theta\) (not ∝ B). This reflects that the spins of the Dirac bands are almost fixed along the sz direction even under the tilted fields owing to the SOC, providing firm evidence for the spin-valley coupling. For BaMnBi2, as shown in Fig. 2d, f, the magnitude of the SOC-induced spin splitting is theoretically estimated to be 200–300 meV at each valley. This corresponds to the effective Zeeman field of 1700–2500 T, which is much higher than the applied field. The similar tilt angle dependence has also been observed in other spin-valley-coupled systems, such as BaMnSb219 and monolayer MoS211.
Discussion
In spite of the small orthorhombicity of (c − a)/a ~0.15% in BaMnBi2, it is surprising that the Dirac bands around the X and Y points show the large spin splitting of 200–300 meV (Fig. 2d, f), which is comparable to that for BaMnSb219,20. We estimate the magnitude of the in-plane lattice polarization by calculating the off-center displacement of the Bi− layer relative to the Ba2+ layer. Note that the off-center displacement of the [MnBi]− layer relative to the Ba2+ layer is negligibly small compared to that of the Bi− layer. The unit cell of the Bi− layer together with the Ba2+ ion is shown in Fig. 2c. Two inequivalent Bi− ions (Bi1 and Bi2) exist because of the zig-zag chain structure. From the structural analysis, the center position of Bi1 (GBi1) is estimated to be GBi1 = (0, −0.008(3)c) by taking the Ba2+ ion as the origin, while the center position of Bi2 GBi2 = (0, 0.029(3)c). The total displacement of the Bi− layer is given by GBi = (GBi1 + GBi2)/2 = (0, 0.011(4)c), and reaches ~1% of the c-axis length. This value is roughly an order of magnitude larger than the orthorhombicity.
We also estimate the magnitude of the in-plane lattice polarization in BaMnSb2, which has a larger orthorhombicity of (c − a)/a ~1.3%19. From the structural data in ref. 19, it is estimated that GSb1 = (0, −0.0082(2)c) and GSb2 = (0, 0.0693(3)c). Note here that ∣GSb1∣ is similar to ∣GBi1∣, while ∣GSb2∣ is ~2.4 times as large as ∣GBi2∣, which suggests that the magnitude of the lattice polarization is determined by the displacement of Bi2 and Sb2. The resultant total displacement of the Sb− layer is given by GSb = (GSb1 + GSb2)/2 = (0, 0.0305(3)c). Compared to BaMnBi2, although the orthorhombicity differs by approximately an order of magnitude, the off-center displacement differs only by approximately three times. Considering the stronger SOC in Bi− than in Sb−, it is natural that the spin splitting of the Dirac bands in BaMnBi2 is comparable to that in BaMnSb2. Nevertheless, the valley configuration sensitively depends on each parameter of the lattice polarization and SOC and hence is totally different between the two compounds.
Finally, we discuss the anomaly in the SdH oscillation at 1/B < 0.05 T−1 (Fig. 3d). As denoted by triangles in Fig. 4, the position (\(1/B\cos \theta\) value) of the additional structure in the SdH oscillation is unchanged by θ, suggesting it is related to the cyclotron motion. Furthermore, because such an additional oscillation has not been reported in BaMnSb219,20, it is characteristic of BaMnBi2. Considering that BaMnBi2 has two inequivalent Dirac valleys (α and β in Fig. 2b), the additional oscillation may arise from another SdH oscillation superimposed on the main one (BF1 = 12.9 T, see Fig. 3e). By the analysis based on this assumption, we obtain the frequency of BF2 = 61(2) T from the oscillatory component at high fields (1/B < 0.05 T−1, see Supplementary Note, Supplementary Figs. 4a–d and 5, and Supplementary Table 2). Importantly, the Fermi surfaces corresponding to BF1 and BF2 are semi-quantitatively reproduced by the first-principles calculation taking account of a slight shift in ϵF (by ~30 meV, see Supplementary Fig. 4e). We also note that such multiple carriers in BaMnBi2 are also consistent with the non-linear ρyx at low fields (Fig. 3c and Supplementary Fig. 3). For these reasons, it is likely that the anomaly at 1/B < 0.05 T−1 originates from the SdH oscillation of another Dirac valley. However, to clarify the precise origin, further investigations on the Fermi surface, such as photoemission spectroscopy, will be necessary as a future work.
In conclusion, we have revealed the crystal and electronic structure of the layered Dirac material BaMnBi2. From the single-crystal X-ray diffraction and the SHG measurement, we found that the Bi− square-net is slightly distorted to form a zig-zag chainlike structure with in-plane lattice polarization. The first-principles calculation predicts that as a result of the broken inversion symmetry together with the SOC, the Dirac valleys show valley-contrasting spin polarization along the sz direction. Such spin-valley coupling is indeed supported by the peculiar dependence of the SdH oscillation on the tilt angle of the field. Interestingly, it is also predicted that the valley configuration in BaMnBi2 (four and two valleys around the X and Y points, respectively) is totally different from that in the Sb analog BaMnSb2 (two valleys around the Y point). This difference originates from the differing magnitudes of the lattice polarization and the SOC; the experimentally obtained lattice distortion in BaMnBi2 is ~1/10 of that in BaMnSb2, while the SOC in Bi is larger than that in Sb. Our results demonstrate that the spin-valley coupling of Dirac fermions in BaMnX2 is finely tunable by chemical substitution and is promising for a variety of novel applications, including electronic and optoelectronic devices utilizing the spin and valley degrees of freedom. Furthermore, the high sensitivity of BaMnX2 to lattice distortions may be taken advantage of to control spin-valley-coupled phenomena using mechanical stimuli, such as strain39.
Methods
Crystal growth
Single crystals of BaMnBi2 were grown by the Bi self-flux method. 99.99% Ba, 99.9% Mn, and 99.999% Bi metal ingots were mixed in an alumina or carbon crucible at a ratio of Ba:Mn:Bi = 1: 1: 4 and sealed in an evacuated quartz tube. The ampoule was heated at 1000 ∘C for 1 day and cooled down to 400 ∘C at a 2 ∘C/h cooling rate. After the ampoule was turned upside down, the flux and single crystals were separated by centrifugation. The synthesized crystals have a plate-like shape with the typical size of 2 mm × 2 mm × 1 mm.
Single crystal X-ray diffraction
A block-shaped pale black single crystal with the dimensions of 0.15 × 0.15 × 0.12 mm was mounted on a loop and set on a RIGAKU 1/4chi goniometer with PILATUS3 X CdTe 1M in SPring-8 BL02B1. The diffraction data were collected using synchrotron radiation (λ = 0.4121 Å) monochromated by Si(311) at T = 100 K. The diffraction data from 7570 data points within 3.954∘ ≤ 2θ ≤ 59.298∘ were collected and merged to give 3236 unique reflections with the Rint of 0.049. The structure was solved by a dual-space method and refined on F2 by a least-squares method using the programs SHELXS40 and SHELXL-2018/341, respectively. The anisotropic atomic displacement parameters were applied for all atoms. The final R values from 3236 unique reflections (2θmax = 59.298∘) with I > 2σ(I) are 0.0659 and 0.1759 for R(F) and wR(F2), respectively. The Flack parameter (χ = 0.39(2))42,43 from anomalous scattering suggests that two types of absolute structures ( + P and − P) are mixed at a ratio of 0.39:0.61. For further details, see the Supplementary information.
Optical measurements
Optical SHG is a nonlinear optical process in which two photons with a frequency of ω interact with the material and produce a photon with the frequency of 2ω. Under the electric dipole (ED) approximation, the SHG is given by \({P}_{i}(2\omega )={\varepsilon }_{0}{\sum }_{j,k}{\chi }_{ijk}^{(2)}{E}_{j}(\omega ){E}_{k}(\omega )\), where ε0, Ej(ω), Ek(ω), and Pi(2ω) are the permittivity of vacuum, the j- and k-polarized incident electric fields, and the induced i-polarized nonlinear polarization, respectively. The ED-type SHG is only allowed in noncentrosymmetric materials or surfaces/interfaces at which the inversion symmetry is broken. The nonlinear susceptibility \({\chi }_{ijk}^{(2)}\) is sensitive to the symmetry of the materials and its nonzero components were determined by the Neumann principle44,45. A cleaved surface of a BaMnBi2 single crystal was irradiated by light pulses from a Ti:Sapphire laser with the wavelength of 800 nm, pulse width of 100 fs, and repetition rate of 80 MHz. The reflection geometry SHG measurements were at nearly normal incidence (~1∘) with a typical laser power of 40 mW and laser beam spot size of ~250 μm. All the SHG measurements were performed in vacuum at room temperature.
First-principles band calculations
We performed first-principles band structure calculations using the density functional theory with the generalized gradient approximation46 and the projector augmented wave method47 implemented in the Vienna ab initio simulation package48,49,50,51. The plane-wave cutoff energy of 350 eV and a 12 × 12 × 12 k-mesh were used with SOC included. The experimental crystal structure determined by this study was used. We assumed the G-type antiferromagnetic order for the Mn atoms. After the first-principles calculation, we constructed the Wannier functions52,53 using the WANNIER90 software54. We did not perform the maximal localization procedure to prevent the mixture of the different spin components. We took the Mn-d and Bi-p orbitals as the Wannier basis. A 12 × 12 × 12 k-mesh was used for the Wannier construction. By using the tight-binding model consisting of these Wannier functions, we obtained the band structure and the Fermi surface colored with the spin polarization, 〈sz〉. The Fermi surface was depicted with a 140 × 140 × 140 k-mesh using the FERMISURFER software55.
Transport measurements
The temperature dependence of ρxx and ρzz was measured by a conventional four-probe DC method using a Physical Property Measurement System (Quantum Design). The field dependence of ρxx, ρyx, and ρzz up to ~56 T was measured using the non-destructive mid-pulse magnet at the International MegaGauss Science Laboratory at the Institute for Solid State Physics, University of Tokyo. In this measurement, we used a four-probe AC method with a typical current and frequency of 5 mA and 50 kHz, respectively. The typical sample sizes used in the in-plane resistivity and interlayer resistivity measurements were 1 mm × 0.3 mm × 0.1 mm (S#3) and 0.8 mm × 0.3 mm × 0.2 mm (S#1, S#2), respectively. The transport properties are almost the same among the measured samples (see Supplementary Fig. 6 and Supplementary Table 3).
Data availability
The data that support the findings of this study are available from the corresponding authors upon reasonable request.
References
Manchon, A., Koo, H. C., Nitta, J., Frolov, S. M. & Duine, R. A. New perspectives for Rashba spin-orbit coupling. Nat. Mater. 14, 871 (2015).
Koga, T., Nitta, J., Akazaki, T. & Takayanagi, H. Rashba spin-orbit coupling probed by the weak antilocalization analysis in InAlAs/InGaAs/InAlAs quantum wells as a function of quantum well asymmetry. Phys. Rev. Lett. 89, 046801 (2002).
LaShell, S., McDougall, B. A. & Jensen, E. Spin splitting of an Au(111) surface state band observed with angle resolved photoelectron spectroscopy. Phys. Rev. Lett. 77, 3419 (1996).
Hoesch, M. et al. Spin structure of the Shockley surface state on Au(111). Phys. Rev. B 69, 241401(R) (2004).
Ishizaka, K. et al. Giant Rashba-type spin splitting in bulk BiTeI. Nat. Mater. 10, 521 (2011).
Liebmann, M. et al. Giant Rashba-Type Spin Splitting in Ferroelectric GeTe(111). Adv. Mater. 28, 560 (2016).
Ideue, T. et al. Bulk rectification effect in a polar semiconductor. Nat. Phys. 13, 578 (2017).
Lee, J. S. et al. Optical response of relativistic electrons in the polar BiTeI semiconductor. Phys. Rev. Lett. 107, 117401 (2011).
Wilson, J. A. & Yoffe, A. D. The transition metal dichalcogenides discussion and interpretation of observed optical, electrical and structual properties. Adv. Phys. 18, 193 (1969).
Xu, X., Yao, W., Xiao, D. & Heinz, T. F. Spin and pseudospins in layered transition metal dichalcogenides. Nat. Phys. 10, 343 (2014).
Lin, J. et al. Determining interaction enhanced valley suspectibility in spin-valley-locked MoS2. Nano Lett. 19, 1736–1742 (2019).
Liu, G. B., Shan, W. Y., Yao, Y., Yao, W. & Xiao, D. Three-band tight-binding model for monolayers of group-VIB transition metal dichalcogenides. Phys. Rev. B 88, 085433 (2013).
Xiao, D., Liu, G.-B., Feng, W., Xu, X. & Yao, W. Spin and valley physics in monolayers of MoS2 and other Group-VI dichalcogenides. Phys. Rev. Lett. 108, 196802 (2012).
Wu, S. et al. Electrical tuning of valley magnetic moment through symmetry control in bilayer MoS2. Nat. Phys. 9, 149 (2013).
Zeng, H., Dai, J., Yao, W., Xiao, D. & Cui, X. Valley polarization in MoS2 monolayers by optical pumping. Nat. Nanotech. 7, 490 (2012).
Cao, T. et al. Valley-selective circular dichroism of monolayer molybdenum disulphide. Nat. Commun. 3, 887 (2012).
Wakatsuki, R. et al. Nonreciprocal charge transport in noncentrosymmetric superconductors. Sci. Adv. 3, e1602390 (2017).
Suzuki, R. et al. Valley-dependent spin polarization in bulk MoS2 with broken inversion symmetry. Nat. Nanotech. 9, 611 (2014).
Sakai, H. et al. Bulk quantum Hall effect of spin-valley coupled Dirac fermions in the polar antiferromagnet BaMnSb2. Phys. Rev. B 101, 081104(R) (2020).
Liu, J. Y. et al. Surface chiral metal in a bulk half-integer quantum Hall insulator. Preprint at https://arXiv:1907.063181 (2020).
Park, J. et al. Anisotropic Dirac fermions in a bi square net of SrMnBi2. Phys. Rev. Lett. 107, 126402 (2011).
May, A. F. et al. Effect of Eu magnetism on the electronic properties of the candidate Dirac material EuMnBi2. Phys. Rev. B 90, 075109 (2014).
Wang, J. K. et al. Layered transition-metal pnictide SrMnBi2 with metallic blocking layer. Phys. Rev. B 84, 064428 (2011).
Masuda, H. et al. Quantum Hall effect in a bulk antiferromagnet EuMnBi2 with magnetically confined two-dimensional Dirac fermions. Sci. Adv. 2, e1501117 (2016).
Kondo, M., Sakai, H., Komada, M., Murakawa, H. & Hanasaki, N. Angular dependence of interlayer magnetoresistance for antiferromagnetic Dirac semimetal AMnBi2(A = Sr, Eu). JPS Conf. Proc. 30, 011016 (2020).
Liu, J. et al. Nearly massless Dirac fermions hosted by Sb square net in BaMnSb2. Sci. Rep. 6, 30525 (2015).
Huang, S., Kim, J., Shelton, W. A., Plummer, E. W. & Jin, R. Nontrivial Berry phase in magnetic BaMnSb2 semimetal. Proc. Natl Acad. Sci. USA 114, 6256 (2017).
Guo, Y. F. et al. Coupling of magnetic order to planar Bi electrons in the anisotropic Dirac metals AMnBi2 (A = Sr, Ca). Phys. Rev. B 90, 075120 (2014).
Masuda, H. et al. Field-induced spin reorientation in the antiferromagnetic Dirac material EuMnBi2 revealed by neutron and resonant x-ray diffraction. Phys. Rev. B 101, 174411 (2020).
Zhu, F. et al. Magnetic structures, spin-flop transition and coupling of Eu and Mn magnetism in the Dirac semimetal EuMnBi2. Phys. Rev. Research 2, 043100 (2020).
Li, L. et al. Electron-hole asymmetery, Dirac fermions, and quantum magnetoresistance in BaMnBi2. Phys. Rev. B 93, 115141 (2016).
Yuan, H. et al. Zeeman-type spin splitting controlled by an electric field. Nat. Phys. 9, 563 (2013).
Lee, G., Farhan, M. A., Kim, J. S. & Shim, J. H. Anisotropic Dirac electronic structure of AMnBi2(A=Sr, Ca). Phys. Rev. B 87, 245104 (2013).
Feng, Y. et al. Strong anisotropy of Dirac cones in SrMnBi2 and CaMnBi2 revealed by angle-resolved photoemission spectroscopy. Sci. Rep. 4, 5385 (2014).
Borisenko, S. et al. Time-reversal symmetry breaking type-II Weyl state in YbMnBi2. Nat. Comm. 10, 3424 (2019).
Luk’yanchuk, I. A. & Kopelevich, Y. Dirac and normal fermions in graphite and graphene: implications of the quantum Hall effect. Phys. Rev. Lett. 97, 256801 (2006).
Shoenberg, D. Magnetic Oscillations in Metals (Cambridge University Press, 1984)
Ando, Y. Topological insulator materials. J. Phys. Soc. Jpn. 82, 102001 (2013).
Yu, J. & Liu, C. Piezoelectricity and topological quantum phase transitions in two-dimensional spin-orbit coupled crystals with time-reversal symmetry. Nat. Commun. 11, 2290 (2020).
Sheldrick, G. M. A short history of SHELX. Acta Crystallogr. A 64, 112 (2008).
Sheldrick, G. M. Crystal structure refinement with SHELXL. Acta Crystallogr. C 71, 3 (2015).
Flack, H. D. On enantiomorph-polarity estimation. Acta Crystallogr. A 39, 876 (1983).
Parsons, S., Flack, H. D. & Wagner, T. Use of intensity quotients and differences in absolute structure refinement. Acta Crystallogr. B 69, 249 (2013).
Becher, C. et al. Strain-induced coupling of electrical polarization and structural defects in SrMnO3 films. Nat. Nanotech. 10, 661–666 (2015).
Matsubara, M., Schmehl, A., Mannhart, J., Schlom, D. G. & Fiebig, M. Large nonlinear magneto-optical effect in the centrosymmetric ferromagnetic semiconductor EuO. Phys. Rev. B 81, 214447 (2010).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865 (1996).
Kresse, G. & Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B 59, 1758 (1999).
Kresse, G. & Hafner, J. Ab initio molecular dynamics for liquid metals. Phys. Rev. B 47, 558(R) (1993).
Kresse, G. & Hafner, J. Ab initio molecular-dynamics simulation of the liquid-metal-amorphous-semiconductor transition in germanium. Phys. Rev. B 49, 14251 (1994).
Kresse, G. & Furthmüller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput. Mater. Sci. 6, 15 (1996).
Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169 (1996).
Marzari, N. & Vanderbilt, D. Maximally localized generalized Wannier functions for composite energy bands. Phys. Rev. B 56, 12847 (1997).
Souza, I., Marzari, N. & Vanderbilt, D. Maximally localized Wannier functions for entangled energy bands. Phys. Rev. B 65, 035109 (2001).
Mostofi, A. A. et al. wannier90: a tool for obtaining maximally-localised Wannier functions. Comput. Phys. Commun. 178, 685 (2008).
Kawamura, M. FermiSurfer: Fermi-surface viewer providing multiple representation schemes. Comp. Phys. Commun. 239, 197 (2019).
Acknowledgements
We are grateful to M.Hagiwara and Y.Shimizu for fruitful discussions. We also thank H.Fujimura, and K.Nakagawa for their experimental support. This work was partly supported by the JST PRESTO (Grant No. JPMJPR16R2), the JSPS KAKENHI (Grant Nos. 19H01851, 19K21851, 19H05173, 21H00147, 17H04844, 21H04649, and 18H04226), and the IWATANI NAOJI Foundation. The synchrotron radiation experiments were performed at the BL02B1 of SPring-8 with the approval of the Japan Synchrotron Radiation Research Institute (JASRI) (Proposal No. 2019B1402).
Author information
Authors and Affiliations
Contributions
H.S. conceived the project and planned the experiments. M.K. and H.S. worked on the single crystal growth. T.K., M.K. and H.S. measured the single-crystal x-ray diffraction and T.K. analyzed the data. D.S. and M.M. performed the optical measurements. M.O. and K.K performed the first-principles calculations. M.K., H.S., R.K., A.M. and M.T. performed the high-field transport measurements. M.K., H.S., H.M. and N.H. measured the resistivity at low fields. M.K. and H.S. wrote the manuscript with the inputs from M.O., T.K., D.S., and M.M. All the authors discussed the results and commented on the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Primary handling editor: Aldo Isidori.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Kondo, M., Ochi, M., Kojima, T. et al. Tunable spin-valley coupling in layered polar Dirac metals. Commun Mater 2, 49 (2021). https://doi.org/10.1038/s43246-021-00152-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s43246-021-00152-z
- Springer Nature Limited
This article is cited by
-
High-entropy engineering of the crystal and electronic structures in a Dirac material
Nature Communications (2024)