Abstract
While two-dimensional (2D) topological insulators (TI’s) initiated the field of topological materials, only very few materials were discovered to date and the direct access to their quantum spin Hall edge states has been challenging due to material issues. Here, we introduce a new 2D TI material, Sb few layer films. Electronic structures of ultrathin Sb islands grown on Bi2Te2Se are investigated by scanning tunneling microscopy. The maps of local density of states clearly identify robust edge electronic states over the thickness of three bilayers in clear contrast to thinner islands. This indicates that topological edge states emerge through a 2D topological phase transition predicted between three and four bilayer films in recent theory. The non-trivial phase transition and edge states are confirmed for epitaxial films by extensive density-functional-theory calculations. This work provides an important material platform to exploit microscopic aspects of the quantum spin Hall phase and its quantum phase transition.
Similar content being viewed by others
Introduction
Topological insulators (TI’s) possess distinct properties, among which most important is the existence of spin helical Dirac fermions on their edges protected robustly. Such topological edge states (TES’s) have been fully demonstrated through experimental studies1,2,3,4,5,6 and grant attractive applications in transporting spin current for spintronic devices and in providing key elements of topological quantum computers7,8. Two-dimensional (2D) TI’s are particularly interesting in applications because of their merits in fabricating electronic or spintronic device structures with their intrinsically localized edge channels. Their TES’s represent two spin polarized channels, which correspond to quantum spin Hall (QSH) edge states. The 2D TI phase was established in HgTe/CdTe and InAs/GaSb quantum well structures through transport measurements9,10,11,12 and ultrathin films of a 3D TI Sb2Te3, Bi2Te3, and Bi2Se3 were suggested to fall into the 2D TI phase13,14,15,16,17,18,19,20. Edge channels of 2D TI’s were accessed microscopically for quantum well structures with scanning SQUID but with only micrometer resolution21,22. More recently, scanning tunneling microscopy/spectroscopy (STM/STS) studies23,24,25,26,27,28,29 claimed the truly microscopic and direct observation of a nanometer scale TES of a 2D TI for a Bi single bilayer (BL) film in which the QSH phase was predicted earlier30,31. However, these Bi single layer films were realized on substrates with strong interactions, which leaves large ambiguity in the topological nature of their edge states26,31,32,33,34,35,36.
In this work, we report the realization of the 2D QSH phase in another material based on epitaxially grown thin films and demonstrate its merit in the unambiguous microscopic observation of a TES. We note on the recent theoretical prediction of a series of topological quantum phase transitions in ultrathin Sb films, particularly that from trivial to the semi-metallic QSH phase between 3 and 4 BL thickness37. We investigate local electronic structures of ultrathin Sb films grown on Bi2Te2Se by STM/STS and ab initio calculations. The initial growth of Sb on Bi2Te2Se exhibits islands of various heights with well-ordered zigzag edges. Our spatially resolved dI/dV (STS) measurements clearly identify strong and robust edge electronic states for 4 and 5 BL films in contrast to 3 BL films. Our calculations clearly indicate the topological phase transition between 3 and 4 BL’s and the topologically non-trivial edge states for 4 BL’s both without and with the interaction of the substrate. A thin film based 2D TI with a well resolved TES is thus established.
Results
Sb film growth on Bi2Te2Se
Figure 1a presents topographic STM image of Bi2Te2Se where Sb islands of 1–5 BL heights are formed. At this growth condition, single BL islands are rare and the portions of 2, 3, 4, and 5 BL areas are about 18, 18, 8, and 2%, respectively. In particular, islands of 3, 4, and 5 BL heights have compact (Fig. 1b,c) and atomically well ordered structures as shown in Fig. 1d,e. The surface of 2 BL films is rather disordered with vacancies and clusters. These close-up images show unambiguously that the islands are (111) oriented with a lattice constant of about 4.0 Å, being consistent with the previous report38. Their well defined edges are perpendicular to the direction (parallel to direction in the k space) and have the zigzag atomic structure.
Local electronic structure of Sb(111) films on Bi2Te2Se
In order to reveal electronic structures of ultrathin Sb films, we performed dI/dV measurements on Sb islands, for example, for an island with 3, 4, and 5 BL height films together (Fig. 2a). We take detailed dI/dV curves along a line crossing two neighboring edges (the arrow within Fig. 2a). The result of this scan is shown in Fig. 2d. The notable features are strong spectral intensities at about −0.5 and +0.1 ~ 0.25 eV in filled and empty states, respectively (horizontal dashed lines). These energies correspond well to the valence band edges of the substrate and the hybridized state between conduction bands of the substrate and the Sb film, respectively (Supplementary Fig. 1). The gradual downshift of these features evidences the charge transfer between the film and the substrate, which depends on the film thickness. The n-type doping of the Bi2Te2Se substrate was also observed for the Bi film growth19. Between −0.5 and +0.1 eV, 2D valence states of the Sb film appear as weak spectral features (more details found in Supplementary Fig. 1). Even within this line scan, one can notice the rather regular spatial modulation of these 2D electronic states of Sb films (and also for those at +0.1~0.25 eV) due to the quasi-particle interference induced by the presence of step edges (Supplementary Fig. 2). The interference pattern analysis, data not shown here, supports their origin in valence states of the Sb film.
In addition to the spectral features within flat parts of Sb films, one can easily notice that electronic states are substantially modulated on step edges (blue and green rectangles in Fig. 2d), in particular in empty states as indicated by arrows. As detailed in Fig. 2e,f, there exist unique electronic states on the edge sites at about +0.36 and +0.28 eV for 4 and 5 BL films, respectively. In the 2D lateral map of dI/dV intensities at these energies, one can clearly see that these electronic states are strongly confined along the edges (Fig. 2b,c) within a width of 2 nm (Supplementary Fig. 3). This edge state cannot be explained by the energy shift of the neighboring state at +0.1 ~ 0.25 eV within the interior of islands since those states do not merge into the edge state and no band bending toward the edge is noticed for all the other spectral features (Supplementary Fig. 4).
We performed similar experiments for islands of 3 BL films on the same substrate. The edge-crossing dI/dV line scan for a 3 BL film is shown in Fig. 3. The 2D plot of this measurement is depicted on Fig. 3b. Even though the dI/dV spectra show rich spectroscopic features, the edge spectrum does not change drastically without a strong edge-localized feature (arrow in Fig. 3b,c). This indicates unambiguously that the edges of 3 BL and thicker films have distinct electronic properties (Supplementary Fig. 5) as discussed further below.
Topological nature of ultrathin Sb films
According to the previous theoretical work for Sb films37, the bands of ultrathin Sb film undergo the band inversion between 3 and 4 BL’s, which indicates a topological phase transition. We detailed this result with our own calculation. We studied the band structure of free standing Sb films of various thickness as a function of the strength of the spin-orbit interaction. As shown in Fig. 4a, above the thickness of 4 BL’s, the band gap at the Brillouin zone center closes and reopens as the spin-orbit interaction is increased. This is directly related to the band inversion; the detailed band dispersion analysis shown in Fig. 4b,c indicates that the bonding and anti-bonding characters of the corresponding bands are switched at the full strength of the spin-orbit interaction. This topological phase transition changes the characteristics of edge states too. In Fig. 4g, we show the electronic band dispersion calculated for a 4 BL film. This film has the nanoribbon geometry for the top layer to feature step edges as shown in Fig. 4f. This geometry mimics well the island and edge structure of the experiment. At the step edge of the top layer of a 4 BL film, we can identify the edge state band. This band has a Dirac dispersion with its Dirac point at the point, where the band gap is largest, and with its spin-split branches dispersing into valence and conduction bands separately at . This clearly evidences the nontrivial TES character (Fig. 4g and Supplementary Fig. 5). Comparing with the STS spectra, we related the edge state peak of the experiment to the top of the edge state band (arrow in Fig. 4g) while there is some energy difference (about 0.12 eV) (Fig. 2e). The calculated LDOS for a TES has another strong peak at a lower energy near Fermi level. This comes from the degenerate TES bands around the K point, which are not easily probed by tunneling spectroscopy probing preferentially electronic states with small in-plane momenta. We prove further that the topological nature of the 4 BL film does not change upon the interaction with the substrate (Fig. 4h,i,e) and the epitaxial case is equivalent to the film under an electric field (Fig. 4d and Supplementary Fig. 6). For a thinner film, the edge state of 2 BL’s branches are spin-split but merge at forming topologically trivial Rashba spin-split bands for both floating and epitaxial films (Supplementary Fig. 5).
Discussion
The QSH edge state is claimed to be directly accessible in nanometer scale for Bi single BL films25,26. However, on the substrate like Bi2Te3 and Bi2Te2Se, the interaction with the substrate is strong enough to close the band gap and the topological nature of the edge state is not clear enough. On the other hand, the step edge state of the Bi surface layer39 was also claimed as the QSH edge state. However, the 2D TI phase of the Bi(111) surface layer cannot be justified and the observed edge state corresponds to the trivial Rashba spin-split state32. In the present case, the edge enhancement of the spectral feature is very much clear and the interfacial interaction is largely diminished for the top layer of 4 or 5 BL films (Supplementary Fig. 5). The robustness of the edge state over defects such as kinks is remarkable in the LDOS maps and spectra (Fig. 2 and Supplementary Fig. 2). Moreover, the absence of the edge state in thinner films corroborates the relationship of the edge state with the 2D topological phase transition. That is, while 2 and 3 BL films feature spin polarized Rashba-type edge states similar to a TES, it is not clearly observed in the experiment in clear contrast to the TES’s of 4 and 5 BL films. We believe that this reflects the susceptibility of a trivial edge state to defects and structural imperfections and, on the other hand, the robustness of a TES. These two facts, the great sensitivity to the film thickness and the total insensitivity to defects, manifest the non-trivial nature of the edge states observed here. The present observation is parallel to a largely different and very recent approach to the QSH edge state, the STM study of the step edge of a weak 3D TI, which corresponds to a stack of 2D TI layers39. This and the present work would uniquely make it possible to investigate microscopic details of a 2D QSH edge state. A controlled experiment with magnetic and nonmagnetic impurities would be helpful to reveal the topological nature of these states more clearly and would open a way to control them. In addition, the present system would make it possible to investigate the 2D topological quantum phase evolution from trivial to nontrivial 2D and 3D phases, which occur as a function of the film thickness.
Methods
STM/STS measurements
The STM/STS experiments were performed in ultrahigh vacuum better than 5 × 1011 Torr, using a commercial low temperature STM (Unisoku, Japan) at ~78 K. STM topographic images were obtained using the constant current mode. The STS spectra (dI/dV curves) were acquired using the lock-in technique with a bias-voltage modulation of 1 kHz at 10–30 mVrms and a tunneling current of 500–800 pA.
Sample growth
Bi2Te2Se single crystals were used as the substrate, which were grown using the self-flux method26,32. The single crystals were cleaved in vacuo at room temperature. Ultrathin Sb islands were grown by a thermal effusion cell at room temperature.
Theory
Ab initio calculations were carried out in the plane-wave basis within the generalized gradient approximation for the exchange-correlation functional40,41. A cut-off energy of 400 eV was used for the plane-wave expansion and the k-points of 11 × 11 × 1 for the Brillouin zone sampling. In order to investigate edge states, we carried out calculations for a single BL nanoribbons of 15 Sb zigzag chains on top of flat and infinite 1 and 3 BL slabs. This reproduces step edges with the zigzag structure of 2 and 4 BL films. The Sb slabs and the nanoribbons were fully relaxed until the Helmann-Feynman forces were less than 0.01 eV/Å.
Additional Information
How to cite this article: Kim, S. H. et al. Topological phase transition and quantum spin Hall edge states of antimony few layers. Sci. Rep. 6, 33193; doi: 10.1038/srep33193 (2016).
References
Hsieh, D. et al. A topological Dirac insulator in a quantum spin hall phase. Nature (London) 452, 970–974 (2008).
Chen, Y. L. et al. Experimental realization of a three-dimensional topological insulator, Bi2Te3 . Science 325, 178–181 (2009).
Hasan, M. Z. & Kane, C. L. Colloquium: Topological insulators. Rev. Mod. Phys. 82, 3045–3067 (2010).
Qi, X.-L. & Zhang, S.-C. Topological insulators and superconductors. Rev. Mod. Phys. 83, 1057–1110 (2011).
Kuroda, K. et al. Experimental realization of a three-dimensional topological insulator phase in ternary chalcogenide. Phys. Rev. Lett. 105, 146801 (2010).
Zhang, H. et al. Topological insulators in Bi2Se3, Bi2Te3 and Sb2Te3 with a single Dirac cone on the surface. Nat. Phys. 5, 438–442 (2009).
Murakami, S., Nagaosa, N. & Zhang, S.-C. Dissipationless quantum spin current at room temperature. Science 301, 1348–1351 (2003).
Sinova, J. et al. Universal intrinsic spin Hall effect. Phys. Rev. Lett. 92, 126603 (2004).
Bernevig, B. A., Hughes, T. L. & Zhang, S.-C. Quantum spin Hall effect and topological phase transition in HgTe quantum wells. Science 314, 1757–1761 (2006).
König, M. et al. Quantum spin Hall insulator state in HgTe quantum wells. Science 318, 766–770 (2007).
Liu, C., Hughes, T. L., Qi, X.-L., Wang, K. & Zhang, S.-C. Quantum spin Hall effect in inverted type-II semiconductors. Phys. Rev. Lett. 100, 236601 (2008).
Knez, I., Du, R.-R. & Sullivan, G. Evidence for helical edge modes in inverted InAs/GaSb quantum wells. Phys. Rev. Lett. 107, 136603 (2011).
Zhang, T., Ha, J., Levy, N., Kuk, Y. & Stroscio, J. Electric-field tuning of the surface band structure of topological insulator Sb2Te3 thin films. Phys. Rev. Lett. 111, 056803 (2013).
Liu, C.-X. et al. Oscillatory crossover from two-dimensional to three-dimensional topological insulators. Phys. Rev. B 81, 041307 (2010).
Lu, H.-Z., Shan, W.-Y., Yao, W., Niu, Q. & Shen, S.-Q. Massive Dirac fermions and spin physics in an ultrathin film of topological insulator. Phys. Rev. B 81, 115407 (2010).
Zhang, Y. et al. Crossover of the three-dimensional topological insulator Bi2Se3 to the two-dimensional limit. Nat. Phys. 6, 584–588 (2010).
Sakamoto, Y., Hirahara, T., Miyazaki, H., Kimura, S.-i. & Hasegawa, S. Spectroscopic evidence of a topological quantum phase transition in ultrathin Bi2Se3 films. Phys. Rev. B 81, 165432 (2010).
Förster, T., Krüger, P. & Rohlfing, M. Two-dimensional topological phases and electronic spectrum of Bi2Se3 thin films from GW calculations. Phys. Rev. B 92, 201404 (2015).
Silkin, I., Koroteev, Y. M., Eremeev, S., Bihlmayer, G. & Chulkov, E. V. Three-and two-dimensional topological insulators in Pb2Sb2Te5, Pb2Bi2Te5, and Pb2Bi2Se5 layered compounds. JETP Lett. 94, 217–221 (2011).
Singh, B., Lin, H., Prasad, R. & Bansil, A. Topological phase transition and two-dimensional topological insulators in Ge-based thin films. Phys. Rev. B 88, 195147 (2013).
Nowack, K. C. et al. Imaging currents in HgTe quantum wells in the quantum spin Hall regime. Nat. Mater. 12, 787–791 (2013).
Spanton, E. M. et al. Images of edge current in InAs/GaSb quantum wells. Phys. Rev. Lett. 113, 026804 (2014).
Murakami, S. Quantum spin Hall effect and enhanced magnetic response by spin-orbit coupling. Phys. Rev. Lett. 97, 236805 (2006).
Wada, M., Murakami, S., Freimuth, F. & Bihlmayer, G. Localized edge states in two-dimensional topological insulators: Ultrathin Bi films. Phys. Rev. B 83, 121310 (2011).
Yang, F. et al. Spatial and energy distribution of topological edge states in single Bi(111) bilayer. Phys. Rev. Lett. 109, 016801 (2012).
Kim, S. H. et al. Edge and interfacial states in a two-dimensional topological insulator: Bi(111) bilayer on Bi2Te2Se. Phys. Rev. B 89, 155436 (2014).
Sabater, C. et al. Topologically protected quantum transport in locally exfoliated bismuth at room temperature. Phys. Rev. Lett. 110, 176802 (2013).
Jin, K.-H. & Jhi, S.-H. Quantum anomalous Hall and quantum spin-Hall phases in flattened Bi and Sb bilayers. Sci. Rep. 5, 8426 (2015).
Lu, Y. et al. Topological properties determined by atomic buckling in self-assembled ultrathin Bi(110). Nano Lett. 15, 80–87 (2015).
Liu, Z. et al. Stable nontrivial Z2 topology in ultrathin Bi(111) films: A first-principles study. Phys. Rev. Lett. 107, 136805 (2011).
Takayama, A., Sato, T., Souma, S., Oguchi, T. & Takahashi, T. One-dimensional edge states with giant spin splitting in a bismuth thin film. Phys. Rev. Lett. 114, 066402 (2015).
Yeom, H. W. et al. Transforming a surface state of a topological insulator by a Bi capping layer. Phys. Rev. B 90, 235401 (2014).
Yeom, H. W., Jhi, S.-H. & Jin, K.-H. Topological fate of edge states of single Bi bilayer on Bi(111). Phys. Rev. B 93, 075435 (2016).
Hirahara, T. et al. Interfacing 2D and 3D topological insulators: Bi(111) Bilayer on Bi2Te3 . Phys. Rev. Lett. 107, 166801 (2011).
Drozdov, I. K. et al. One-dimensional topological edge states of bismuth bilayers. Nat. Phys. 10, 664–669 (2014).
Kawakami, N., Lin, C.-L., Kawai, M., Arafune, R. & Takagi, N. One-dimensional edge state of Bi thin film grown on Si(111). Appl. Phys. Lett. 107, 031602 (2015).
Zhang, P., Liu, Z., Duan, W., Liu, F. & Wu, J. Topological and electronic transitions in a Sb(111) nanofilm: The interplay between quantum confinement and surface effect. Phys. Rev. B 85, 201410 (2012).
Yao, G. et al. Evolution of Topological Surface States in Antimony Ultra-Thin Films. Sci. Rep. 3, 2010 (2013).
Pauly, C. et al. Subnanometre-wide electron channels protected by topology. Nat. Phys. 11, 338–343 (2015).
Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).
Seo, J. et al. Transmission of topological surface states through surface barriers. Nature 466, 343–346 (2010).
Acknowledgements
This work was supported by Institute for Basic Science (IBS) through the Center for Artificial Low Dimensional Electronic Systems (Grant No. IBS-R014-D1), and by the National Research Foundation (NRF) through the Center for Topological Matter (Grant No. 2011-0030046 for S.H.J. and Grant No. 2011-0030785 for J.S.K.), and the Max Planck POSTECH/KOREA Research Initiative (Grant No. 2011-0031558) programs.
Author information
Authors and Affiliations
Contributions
H.W.Y. conceived the project and organized the collaboration. S.H.K. performed the STM/STS measurements. K.-H.J. and S.-H.J. carried out first-principles calculations. The substrate was made by J.P. and J.S.K. S.H.K. and H.W.Y. wrote the manuscript with the comments from the other authors.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Electronic supplementary material
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Kim, S., Jin, KH., Park, J. et al. Topological phase transition and quantum spin Hall edge states of antimony few layers. Sci Rep 6, 33193 (2016). https://doi.org/10.1038/srep33193
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep33193
- Springer Nature Limited
This article is cited by
-
The topological soliton in Peierls semimetal Sb
Scientific Reports (2024)
-
Electrical transport properties in group-V elemental ultrathin 2D layers
npj 2D Materials and Applications (2020)
-
Statics and dynamics of multivalley charge density waves in Sb(111)
npj Quantum Materials (2019)