Abstract
Allografts eliminate the disadvantages associated with autografts and synthetic scaffolds but are associated with a disease-transmission risk. Therefore, allograft sterilisation is crucial. We aimed to determine whether polyvinylpyrrolidone-iodine (PVP-I) can be used for sterilisation and as a new wet-preservation method. PVP-I–sterilised and preserved allografts demonstrated improved mechanical property, osteogenesis, and excellent microbial inhibition. A thigh muscle pouch model of nude mice showed that PVP-I–preserved allografts demonstrated better ectopic formation than Co60-sterilised allografts (control) in vivo (P < 0.05). Furthermore, the PVP-I–preserved group showed no difference between 24 h and 12 weeks of allograft preservation (P > 0.05). PVP-I–preserved allografts showed more hydrophilic surfaces and PVP-I–sterilised tendons showed higher mechanical strength than Co60-sterilised tendons (P < 0.05). The level of residual PVP-I was higher without washing and with prolonged preservation (P < 0.05). In vitro cellular tests showed that appropriate PVP-I concentration was nontoxic to preosteoblast cells, and cellular differentiation measured by alkaline phosphatase activity and osteogenic gene markers was enhanced (P < 0.05). Therefore, the improved biological performance of implanted allografts may be attributable to better surface properties and residual PVP-I, and PVP-I immersion can be a simple, easy method for allograft sterilisation and preservation.
Similar content being viewed by others
Introduction
In cases of vital damages, allografting of tissues such as bone, tendon, and meniscus is currently an alternative to autografting, as the former has several advantages including lower surgical morbidity, less surgical time, and better cosmetic appearance1. Its utilisation for orthopaedic procedures has increased steadily over the past decade, with approximately one million allografts transplanted annually2. This number is estimated to increase more dramatically in in the near future3. Allografts eliminate the disadvantages associated with autografts and synthetic scaffolds such as secondary surgery and uncertain quality and quantity of the graft material. However, a major drawback of allografts is its potential risk for disease transmission4. Therefore, the sterilisation process is the focus of allograft transplantation.
Allograft sterilisation aims to eradicate the survival of harmful organisms while maintaining important biological and structural properties of the grafts. Usually, tissue banks rely on aseptic procurement and processing that involves removal of debris and organic matter, soaking in various disinfectant solutions, and monitoring for microbes at various stages of processing. In addition, pretreatment including decellularisation to remove cellular antigens and reduce immunogenicity has the potential to eliminate the need for autologous or patient-matched grafts for direct clinical use5,6. However, terminal sterilisation is a critical step used to eliminate bacteria and viruses5,7. Currently, there is no general consensus on the method for terminal sterilisation of allografts. Some tissue banks have implemented secondary sterilisation methods such as low-to-moderate dose of gamma irradiation (GI).
Sterilisation of biological tissues can be problematic because these processes typically have an aggressive mechanism of action that can adversely affect the natural tissue properties. Alteration of the natural properties such as biomechanics, physical structure, and surface chemistry potentially mitigate the benefits of using naturally derived materials for tissue regeneration by modifying intrinsic factors that direct cell adhesion and tissue regeneration8,9,10,11.
In the current decade, GI is the most prevalent method of sterilisation used by tissue banks12. It is used as a gold standard to provide safety against disease transmission and is beneficial in eradicating human immunodeficiency virus and hepatitis C in bone allografts at a radiation level of 25–35 kGy13,14,15. However, the irradiation dose needed to achieve a sterility-assurance level of 10−6 is 89 kGy13. Sterilisation by GI occurs through the formation of free radicals through radiolysis of the water present in collagen, which can lead to post-implantation difficulties such as prefailure and/or secondary fractures of bone allografts16. Furthermore, higher doses of radiation can result in modifications of the microscopic and ultrastructural appearance of tendons and ligaments17. As such, it can result in a significant decrease in the mechanical strength of the graft, rendering it unsuitable for implantation18.
Some studies have reported that allografts become less efficacious following GI19,20,21. Several studies have also focused on the effect of GI on osteoinductive activities of allografts. Although GI has not been associated with chemical changes in soft tissue, it has been shown to produce structural and mechanical changes that may affect cellular interactions22,23. Bone allografts should be defatted to prevent cell death induced by peroxidised lipids. These peroxidised lipids are formed from lipids present in the medullary spaces and can release compounds toxic to osteoblast-like cells24. Various studies have assessed how sterilisation affects the biomechanical properties of tissue grafts. The effects of radiation on collagen fibres include direct scission of alpha polypeptide chains or crosslinking of polypeptide chains in the presence of free radicals25,26.
It is often necessary for the tissue to be stored for extended periods of time prior to the commencement of tests or applications27,28,29. Because maintenance of biomedical products in aqueous solution can cause significant product deterioration, preserved tissues are commonly dehydrated or frozen30. However, allografts are better preserved in solution before use, because organs of the human body have a high water content. Therefore, it is important to identify a method better than GI, which will not affect the biological and mechanical properties of the sterilised tissue and maintain the wet state of the allografts.
Polyvinylpyrrolidone-iodine (PVP-I) is an iodine-containing antiseptic compound used for a long time as a mucosal skin disinfectant31. It has useful properties for local anti-infective treatment, in particular, surface decontamination and has a broad microbicidal action spectrum including bacteria, fungi, protozoans, and viruses32. Furthermore, it can kill microbes in seconds with nearly no resistance and has minimal allergic and toxic potential33,34. Therefore, PVP-I is a promising candidate for many new applications such as wound healing, ocular treatment, inhalative treatment of the respiratory tract, intra-articular infections, and prophylaxis after joint surgery.
PVP-I solution enhances osteogenic differentiation in an osteoblast-like cell line, MC3T3-E135. More recently, the biocompatibility and biological effects of PVP-I on cells from joint tissue were examined, and the results indicated the potential of PVP-I for osteochondral defect repair36. The main component of PVP-I is iodine and poly (N-vinyl-2-pyrrolidone) (PVP). PVP is a water soluble and low cytotoxic organic polymer, as well as a hydrophilic polymer excipient. As reported previously, osteogenic differentiation of BM-MSC was enhanced by PVP-I, but not by PVP, thus implying that the iodine molecule is the active ingredient36.
In our previous study, by in vitro and in vivo tests showed that demineralised bone matrix (DBM) sterilised by PVP-I could achieve enhanced osteogenesis compared with irradiated DBM37. Therefore, taking these findings forward, in this study, we aimed to determine whether PVP-I can be used for sterilisation, in particular, terminal sterilisation. Additionally, we assessed whether it can be used as a new wet-preservation method capable of maintaining the mechanical properties of tissue grafts while enhancing their osteogenesis as well as tried to identify its underlying mechanism of action.
Results
PVP-I has effective antimicrobial efficacy
In order to use PVP-I as a sterilising and preservation agent, we first tested its efficacy to inhibit microbial growth. Contamination was indicated by the growth of microbial colonies. The colony-counting method was used, and each result is presented as the average of 5 replicate assays. Numeration on model agar medium showed 100% inhibition of the growth of selected gram-positive bacteria (Staphylococcus aureus), fungus (Monilia albicans), and bacterial endospores (Bacillus subtilis) and 91% inhibition of the growth of gram-negative bacteria (Escherichia coli) (Fig. 1). PVP-I did not show 100% inactivation of gram-negative bacteria after 24 h of sterilisation of porous DBM contaminated in microbial/Dulbecco’s modified Eagle’s medium (DMEM) media. However, it showed excellent pathogen-inactivation ability and inactivated all the selected gram-positive bacteria, fungi, and bacterial endospores.
PVP-I–preserved allografts enhance osteogenesis in vivo
We found in a preliminary study that implantation of PVP-I–preserved DBM induced better bone regeneration compared to Co60-irradiated ones in a mouse model (Fig. 2). Therefore, we aimed to analyse this finding in the current study. Compared with the Co60-irradiated DBM group, the new bone area was significantly larger in the PVP-I–sterilised DBM group (P = 0.000, P < 0.05). To test the effects of preservation time on osteogenesis, we extended the preservation time from 24 h to 12 weeks. There was no difference in the osteogenic properties of PVP-I–preserved DBM between these two time points (P = 0.618, P > 0.05), but both PVP-I–preserved DBM showed better results than Co60-DBM (P = 0.000, P < 0.05).
The immunohistochemistry assay (preservation time of 12 weeks) suggested that COL-1α and OCN expression was significantly higher in the PVP-I group than in the Co60-irradiated group (P = 0.000, P < 0.05), which explains the better bone regeneration in the former group (Fig. 3). The images of preservation time 24 h were not shown because there was no difference between 24 h and 12 weeks.
PVP-I–preserved allografts have better surface properties
Wettability was determined by contact angle measurements. Hydration with α- minimum essential medium (α-MEM) demonstrated that both irradiated and PVP-I preserved samples (preservation time of 24 h) were hydrophilic as defined by a contact angle <90°. PVP-I preserved samples with contact angles averaging 36.4°were significantly more hydrophilic than irradiated ones that averaged 62.6° (P = 0.000, P < 0.05) (Fig. 4).
Scanning electron microscope (SEM) micrographs and energy-dispersive X-ray spectroscopy (EDS) results of the samples are shown in Fig. 5. The surface morphology of PVP-I preserved DBM (preservation time of 24 h) is clearly different from Co60 irradiated one. The former one has a rougher surface with many open pores, similar to the morphology before sterilization, while the latter exhibits a smooth and flattened surface. EDS measurements were performed to determine the elemental composition of the surface, with a particular focus on iodine content. The results indicated that the three groups generally share a similar composition. However, trace amount of iodine can be detected on the surfaces of PVP-I preserved DBM.
Protein adsorption behaviour onto the samples is plotted in Fig. 6. The results showed that PVP-I group (preservation time of 24 h) had a significant effect on protein adsorption. Its values were significantly higher than irradiation group (n = 6, P = 0.0015, P < 0.05).
PVP-I–preserved allografts maintain better mechanical strength
To clarify the effects of PVP-I preservation on the biomechanical properties of tendon, stress–strain measurements were conducted. The tensile strength of the tendons was 278.71 ± 66.01 N for the Co60-irradiated group (25 kGy) and 402.83 ± 46.90 N for the PVP-I group (preservation time of 12 weeks) (P = 0.009, P < 0.05). We found that PVP-I–preserved tendons showed higher tensile strength than the Co60-irradiated tendons (Fig. 7).
PVP-I–preserved allografts contains residual iodine
Residual iodine was detected in all groups in this study and its content was highest in the 12-week group and lowest in the 24 h + wash group (12 w > 12 w + wash > 24 h > 24 h + wash) (Fig. 8). Significant differences were noted between any two of the four groups (P = 0.002 for (12 w) and (12 w + wash), P = 0.003 for (24 h) and (24 h + wash), P = 0.000 for comparison between any two of the rest groups, P < 0.05).
Appropriate concentration of PVP-I is cytocompatible and can stimulate osteogenic differentiation in vitro
Cell tests were used to verify the effects of PVP-I on pre-osteoblast cells, including their cytotoxicity and osteogenic properties. The Cell Counting Kit-8 (CCK-8) showed reduced proliferation of MC3T3-E1 cells when the concentration of PVP-I was >80 ng/mL (P = 0.043, P = 0.000, P < 0.05). This effect was eliminated and even slightly promoted when the concentration of PVP-I was ≤80 ng/mL (Fig. 9). However, this result was not significant (P = 0.787, P = 1.000, P > 0.05). Therefore, 80 ng/mL was chosen as the appropriate concentration for further differentiation tests.
The alkaline phosphatase (ALP) concentration detected by the p-nitrophenyl phosphate (pNPP) method showed a significant increase in the PVP-I group compared with complete culture medium group (P = 0.000, P < 0.05) (Fig. 10a). Moreover, real-time quantitative polymerase chain reaction (RT-qPCR) showed upregulation of osteogenic gene markers including COL-1α, ALP, and RUNX2 in the PVP-I group (P = 0.044, 0.020, and 0.016, respectively; P < 0.05) (Fig. 10b). However, the expression of OCN did not significantly increase on day 3 (P = 0.782, P > 0.05).
Discussion
The basis of this study was the preliminary finding that in vivo bone formation of PVP-I–preserved allografts was better than Co60-irradiated allografts. Combined with the results reported previously, we hypothesised that PVP-I preservation may be a terminal method for sterilisation and preservation of allografts. This is the first study to report excellent performance of PVP-I–preserved allografts in tissue engineering and to explore its underlying mechanisms.
In order to prove the abovementioned hypothesis, we performed 4 steps. First, microbial inactivation tests were performed to determine the sterilisation efficacy of PVP-I. Second, an in vivo mice model was prepared to confirm bone formation in the PVP-I–preserved allografts. Third, we explored the underlying mechanism of action of PVP-I preservation. We thought the excellent osteogenic performance may come from different surface properties and residual iodine in PVP-I–preserved allografts. Therefore, surface morphology was observed. Contact angles and protein adsorption abilities were examined. And the content of the residual iodine was measured. Finally, we performed in vitro cell assays to detect the effects of PVP-I on cell proliferation and osteogenic differentiation.
PVP-I is widely used for lavation and irrigation during open joint surgery to prevent surgical site infection38,39,40. Its sterilisation efficacy is closely related to its concentration and can be increased with time32. Recently, Soyer J et al. have successfully used a 10% povidone-iodine solution to decontaminate inoculated bone grafts41. PVP-I used here is a commercially available product, which makes it easy for future clinic applications. To confirm the consistency between different manufacturers, we tested several different brands. The effective iodine concentration of all these products is 0.5% ± 0.05% (w/v). Its applications include to hand brushing before operation, skin disinfection before surgery and injection, mucous disinfection; and wound disinfection, etc. This is the only formula of PVP-I we used for sterilization and preservation DBM.
The inactivation of four kinds of microbes was investigated in this study. The pathogens tested included bacterial spores, fungi, and gram-negative and gram-positive bacteria with aerobic and anaerobic growth characteristics. The microorganisms were selected on the basis of clinical importance and occurrence as a contaminant in tissue products. We achieved complete inactivation of gram-positive bacterium, a spore, and a fungus as well as less-than-ideal, but acceptable, inhibition of gram-negative bacterium. These differences in inhibition performance may be a result of differences in cell membrane properties. We expected greater inactivation of gram-negative bacterium with a thorough rinse to remove the residual organic media in the porous DBM and a longer sterilisation time. However, as a terminal sterilisation method, the antibacterial ratio obtained was sufficient to achieve a sterility assurance level of 10−6. Therefore, PVP-I can be used as a terminal sterilisation method and produce safe allografts.
In the current study, PVP-I showed additional benefits besides excellent pathogen inactivation. We evaluated the mechanical properties of biological tissue, which is important for improving the standard of healthcare. PVP-I–treated and Co60-irradiated tendon allografts were prepared in similar size and shape, following which their mechanical properties were compared. Our results showed that the PVP-I–treated tendons were stronger. The difference in maximal load to failure was statistically significant and demonstrated that the PVP-I–treated tendon allografts were stronger than the Co60-irradiated allografts.
The biomechanical parameter of Co60-irradiated tendons showed a significant decline after irradiation, making it unsuitable for clinical application. This finding also validates the concern regarding the use of irradiated tendon allografts with decreased mechanical properties. There is a significant amount of literature documenting a dose-dependent, deleterious effect of conventional GI on the biomechanical properties of tissues42,43. Consequently, there is a general negative perception that high doses of GI adversely affect graft integrity and efficacy. Bone loses a significant amount of strength during compression, bending, and torsion when exposed to >30 kGy doses of conventional irradiation42,43,44. We used tendons for the test instead of bone grafts, because the strength of the former is more important in determining postoperative management. Our results proved that PVP-I is a better choice than GI for maintaining the mechanical properties of tendons. However, our study does not clarify whether the allograft ever attains the strength of non-treated or fresh allografts. Nevertheless, long-term studies are needed to identify the changes in the strength of PVP-I–preserved allografts and determine whether their strength is maintained after treatment with PVP-I or increases/decreases over time.
Then, we used in vivo mice model to detect the osteogenic properties of PVP-I. The nude mouse model was selected to prevent the immune system reaction of the animal, which will increase the likelihood that an observed response is not derived from the implants but immunogenic. Therefore, athymic animals are typically used by industry to assay osteoinduction ability of commercial human DBM products for this reason45. The only difference in the PVP-I treatment is the sterilization/preservation time. Currently, we tested two time points, 24 h and 12 weeks. We found that both PVP-I–preserved DBM induced better bone regeneration than Co60-irradiated DBM, which is consistent with the finding of Jiang YZ et al.36 who concluded that an appropriate concentration of PVP-I is good for bone regeneration. Our in vivo results also suggested that the activity of DBM is enhanced by PVP-I.
Quantitative comparison of new bone formation by assessment of haematoxylin-eosin (H&E)-stained images confirmed that there were no differences between the PVP-I–preserved allografts at 24 h and 12 weeks, indicating that PVP-I can be used to preserve allografts. Therefore, allografts preserved in PVP-I can be sterilised while achieving higher osteogenic bioactivity.
Immunohistochemical staining showed that expression of CoL-1α and OCN was upregulated in the PVP-I group compared with the Co60-irradiated group. This in vivo result is consistent with previously reported in vitro study results36, indicating the enhanced expression of the same osteogenic gene markers.
Different sterilization methods result in variations of the scaffold ultrastructure, mechanics, and chemistry that affected its performance in vitro and in vivo. Contact angle was tested by α-MEM to enhance the visibility. According to our SEM images, contact angle and protein adsorption ability results, the surface properties of PVP-I preserved allografts and Co60 irradiated ones were significantly different. The PVP-I method can preserve the original morphology of the allografts with hydrophilic surfaces. It showed a decrease in contact angle compared with irradiated ones. In contrast, irradiation made changes to the original surfaces by flattening them. The current results are consistent with previous report that radiation can result in modifications of the microscopic and ultrastructural appearance of allografts17. Hydrophilicity and wettability are closely related and an important parameter for adhesion of proteins and cells. Adsorption of protein to biomaterial surfaces may precede and facilitate adhesion of cells to implanted materials. The protein study results confirmed what was shown in SEM images that PVP-I preserved allografts had an increased surface area when compared with irradiated ones. So, we have good reasons to assume that there is a similarity to adhesive proteins like fibronectin, and thus imply the possible differences in adhesive protein adsorptions and the resultant initial cellular events. In all, the inferior performance of irradiated ones may partly come from the poor surface properties compared with PVP-I preserved ones.
Surface property is one of the most implant factors in scaffold bioactivities. Another is the incorporation of bioactive element. The iodine molecule is the active ingredient in PVP-I36. As indicated by EDS detection, there was a little iodine on the surfaces of PVP-I preserved allografts. Therefore, we further quantitatively measured the residual iodine concentration. It was suggested that a prolonged preservation with PVP-I can increase the residual iodine content and washing can decrease this content. However, the highest content in this study was still far below the safety concentration stipulated by the Chinese Standard GB 5461–2000, indicating that the iodine content of PVP-I–preserved allografts is safe for the human body.
The bioactive properties of DBM originate from bone morphogenetic protein (BMP). The effect of GI on the osteoinductivity of DBM is controversial, because gamma-irradiated DBM samples can also release BMP46. Therefore, BMP is not the main reason for enhanced osteogenesis of PVP-I compared to GI. In other words, the effect of iodine outweighs the effects of released BMP.
As expected, residual iodine was detected in PVP-I–preserved allografts. However, its concentration was very low, i.e., below micromolar level. When used as a sterilisation and preservation agent, a small amount of PVP-I remains in the grafts after thorough washing with saline. Moreover, the presence of blood and exudate can further dilute the concentrations of these antiseptics in an in vivo microenvironment. Thus, the real PVP-I concentration in the implanted grafts must be much lower than the concentration used. Care must be taken with the use of PVP-I, as it can have negative effects such as cytotoxicity. PVP-I has been used to disinfect zebrafish embryo47, but it is toxic to brain tissues48. Furthermore, exposure to PVP-I, the concentrations of which are even lower than those used clinically, is toxic to epithelial cells49.
A cytocompatibility assay was performed to determine the appropriate PVP-I concentration for preservation and sterilisation of the allografts. Given the dose-dependent effects of PVP-I on cellular behaviour, the balance of negative effects on the proliferation and positive effects on osteogenic differentiation need to be optimised. Within the limits of the current study, we found that PVP-I at a concentration of 80 ng/L did not inhibit the proliferation of pre-osteoblast cells. However, it inhibited cell proliferation at higher concentrations, and this finding is consistent with that of Yang ZJ et al.36 moreover, our working concentration (80 ng/L) for osteogenic detection was lower than that used in their study, indicating that PVP-I can enhance osteogenic differentiation at lower concentrations as well.
The ALP and type I collagen concentrations in cultured MC3T3 cells notably increased in the PVP-I group in a similar pattern; however, the concentrations of OCN did not increase. A previous study reported that expression of OCN is induced only after expression of ALP and type I collagen50.
Iodine is known to be an essential micronutrient that plays a crucial role in the healthy development of animals51. It is a bioactive element and can benefit osteogenesis by producing thyroid hormone. Therefore, the initiation of osteogenesis in the PVP-I–preserved grafts may be attributed to both systemic and local effects, which together result in the upregulation of RUNX2, OCN, ALP, and CoL-1α expression, presenting as enhanced osteogenesis.
It is important that any pathogen-inactivation method for allografts provide the greatest possible reduction in infectivity while preserving the biophysical integrity of the tissue. Aseptic processing in the tissue-bank industry is both expensive and prone to failure52, and gamma irradiation is associated with significant compromises in the biomechanical properties of tissue allografts as well as the generation of toxic lipid compounds53. In comparison, PVP-I is a relatively simple material that can be directly obtained from a drug store without prescription. Therefore, PVP-I may emerge as a more compatible option for increasing the bioactivity of human allograft tissue, which will increase the use of human allograft tissue in orthopaedic surgeries. Thus, the industry can benefit from new sterilisation technologies including preservation of the meniscus, tendon, and osteochondral allografts.
In our future studies, we plan to explore the detailed mechanism of this action of PVP-I and extend the preservation time. And we are planning to use in vivo bone defect model to confirm the osteogenesis of PVP-I treated DBM. The data obtained in the present study may serve as a baseline to illustrate the use of PVP-I as a method for tissue sterilisation and preservation.
In conclusion, allografts preserved in PVP-I solution present with improved mechanical property and osteogenesis. PVP-I does not do hamper the biological and mechanical properties of sterilised tissue and maintains the wet state of the allografts. The improved biological performance of PVP-I preserved allografts may be attributable to better surface properties and residual PVP-I. The current findings suggest that PVP-I immersion can be used as a simple and easy method for sterilisation and preservation of a variety of allografts.
Methods
Human materials
The demineralisation process of DBM was similar to that employed by Urist et al.54 with the addition of several wash steps to remove the residual chemicals. The particle size of used DBM varied from 125 to 850 microns, and the DBM underwent lyophilisation after processing to produce a dry final product. Co60-DBM was produced using 25 kGy irradiation. PVP-I–sterilised DBM was produced by immersing the DBM in PVP-I (0.5%, 40 mM).
Antimicrobial effectiveness of PVP-I
According to the requirements of Chinese Standard GB15981–1995, 4 standard strains—S. aureus (ATCC 6538), B. subtilis (ATCC 9732), E. coli (ATCC 25922), and C. albicans (ATCC 10231)—were used to determine the effectiveness of PVP-I sterilisation. Two milliliters of each microbial solution at a concentration of 107 CFU/mL was used to contaminate Co60-DBM (1 g) for 12 h at 4 °C. After a thorough rinse with sterilised saline, 2 mL of 0.5% PVP-I (ANNJET, Dezhou, China) was used to sterilise the contaminated samples at 4 °C for 24 h. The contamination controls were sterilised using phosphate-buffered saline (PBS) solution (1×) to test their initial contamination level. Thereafter, the samples were incubated with 10 mL DMEM (Gibco, Grand Island, USA) for 12 h at 37 °C under sterile conditions. At the end of the incubation period, the supernatant was collected and diluted 1,000 times for further use. Subsequently, 100 μL of diluted supernatant was mixed with 20 mL nutrient agar media at 45 °C and cooled to form solid ager on a plate (diameter, 60 mm). After culturing at 37 °C for 24 h, the colonies on the agar plate were counted by naked eye. Microbial inhibition was calculated using the formula below:
Microbial inhibition% = [(Colonies in control group − Colonies in PVP-I group)/Colonies in control group] × 100%.
Measurement of residual iodine content
The PVP-I–preserved allograft samples were categorised into four test groups: allografts preserved for 24 h (24 h), allografts preserved for 24 h and thoroughly rinsed with sterilised de-ionised water (24 h + wash), allografts preserved for 12 weeks (12 w), and allografts preserved for 12 weeks and thoroughly rinsed with sterilised de-ionised water (12 w + wash). The iodine content was detected by inductively coupled plasma mass spectrometry (n = 9).
Contact angle detection and protein adsorption ability test
The hydrophilic properties of PVP-I preserved freeze-dried allografts and Co60 irradiated ones were investigated. PVP-I preserved samples were thoroughly rinsed by 1 × PBS, and dried at 37°. The specimens (n = 9) were prepared by cutting them into strips. Surface contact angle measurements were done by dropping 10 μL α-MEM (HyClone, UT, USA) onto the top surface of each sample. A photograph was taken within 10 s. Each sample was repeated five times. Surface contact angles were measured by Image-Pro Plus 6.0, and an average value was obtained and analysed statistically.
The surface morphology was observed by a SEM (Qutan™ FEG 250, FEI, Oregon, USA). EDS was performed at the same time.
For protein adsorption, the procedure was performed as previously reported55. Briefly, samples were immersed in PBS for 2 h, and then immersed in 4.5 g/L bovine serum albumin (BSA, Sigma-Aldrich) solution at 37 °C for 24 h. Then rinsed with fresh PBS, and immersed in a solution of 1% sodium dodecylsulfate (SDS) in PBS and sonicated for 20 min to detach the BSA adsorbed on the samples. A protein analysis kit (micro BCA protein assay kit, Fisher Scientific, Pittsburgh, PA) was used to determine the BSA concentration in the SDS solution. The absorbance at 562 nm was measured via a microplate reader (Multiskan™ FC Microplate Photometer, Thermo Fisher Scientific, MA, USA). Standard curves were prepared using the BSA standard.
Cell culture and seeding
The MC3T3-E1 osteoblast-like cells (Chinese Science Academy, Shanghai, China) used in our experiments underwent 6–11 passages. Cells were seeded on the samples at densities of 2 × 104/mL in α-MEM (HyClone, UT, USA) containing 10% fetal bovine serum (FBS; HyClone) and 1% penicillin/streptomycin (Gibco, Grand Island, USA). Subsequently, the cells were cultured in an incubator at 37 °C at a humidity of 95% with 5% CO2. Totally, 100 μL/well was used for 96-well culture plates, and 2 mL/well was used for the 12-well culture plates.
Cell viability assay
Commercial PVP-I solution was diluted by complete culture medium. The effective iodine content from PVP-I was set at 320 ng/mL, 160 ng/mL, 80 ng/mL, and 40 ng/mL. Complete culture medium was used as the control. Cell viabilities were measured after culturing the cells for 48 h at 37 °C in 96-well plates using a CCK-8 (Dojindo, Japan). After 2 h, the absorbance was recorded in each well using an automatic enzyme-linked immunosorbent assay reader (Multiskan™ FC Microplate Photometer, Thermo Fisher Scientific, MA, USA) at 450 nm.
Measurement of ALP activity
MC3T3-E1 cells were incubated in a 96-well culture plate for 24 h at 37 °C. The effective iodine content from PVP-I was 80 ng/mL. Complete culture medium was used as the control. ALP activity was measured after 7 days of culture using the pNPP method (Meilun, Dalian, China) with the (Multiskan™ FC Microplate Photometer, Thermo Fisher Scientific, MA, USA). The absorbance was determined at 405 nm, and measurements were performed in triplicate and repeated at least three times. The result of ALP was normalized against total protein content measured by Bicinchoninic acid (BCA) method.
RT-qPCR
MC3T3-E1 cells were incubated in a 12-well culture plate for 72 h at 37 °C. The effective iodine content from PVP-I was 80 ng/mL, and the complete culture medium was used as the control. mRNA expression of CoL-1α, ALP, RUNX2, and OCN were measured. Briefly, total cellular RNA was obtained using TRIzol reagent (Invitrogen, CA, USA) following the manufacturer’s protocol. After dissolution in DEPC-treated water (Ambicon, Inc., TX, USA), the concentration and purity of the RNA samples were determined using a NanoVue Plus (GE Healthcare, NY, USA) at 230, 260, and 280 nm. Complementary DNA (cDNA) was generated from the extracted total RNA by using a PrimeScript RT Master Mix kit (Takara Bio Co., Ltd, Tokyo, Japan). The primers used were designed by Shanghai Sangon Biotech Co., Ltd., (Shanghai, China) (Table 1), and glyceraldehyde-3-phosphate dehydrogenase (GAPDH) was used as an endogenous control for calculating differences in RNA levels by the 2−ΔΔCT method. Real-time quantification of cDNA targets was performed using a RT-PCR System (7500-Fast; Applied Biosystems, CA, USA) with an UltraSYBR Mixture (Low ROX) (CWBiotech Co., Ltd., beijing, China). The reaction mix (50 μL) contained 50ng total cDNA, 0.2 μM of each primer, and appropriate amounts of enzymes and fluorescent dyes, as recommended by the supplier. The two-stage PCR program was performed as follows: 10 min at 95 °C for DNA polymerase activation, 40 cycles of 15 s at 95 °C, and a 1 min extension step at 60 °C. The PCR reaction was followed by melting-curve analysis to verify the specificity and identity of the RT-PCR products; this analysis can distinguish specific PCR products from nonspecific PCR products resulting from primer-dimer formation. The resulting data were analysed using the software provided by the manufacturer.
Surgical procedures
For the surgical studies, PVP-I DBM was immersed in PVP-I for 24 h or 12 weeks at 4 °C. Co60-irradiated DBM sterilised with 25 kGy Co60 was used as the control. The osteoinductivity of PVP-I DBM and Co60-irradiated DBM was analysed using an in vivo ectopic pouch model of anesthetised BALB/c nude mice (1.5 month, male, 21 g ± 4 g, n = 8) (Animal Center of First Affiliated Hospital of CPLA General hospital, China). Samples (0.1 g each) were implanted per animal, and the animals were anesthetised via celiac injections. After thoroughly rinsing with sterilized saline, the samples were implanted into the gastrocnemius muscle of the hind limb using nude mice. Bilateral incisions in the hind limbs were made (longitudinal and 2 mm in length). The left side was used as the control site (implant of Co60 DBM), and the right site was used as the experimental site (implant of PVP-I DBM). Muscle pouches were closed by a single suture, which also served to secure the implant and locate the implantation site at the time of sacrifice. Intramuscular injection of antibiotics was administered post-surgery until wound healing. Wound clips were used to close the skin incisions, which were removed 7–10 days later. Animals were euthanized 28 days later by excessive inhalation of carbon dioxide.
Histological and immunohistochemical analyses
The implanted DBM with its surrounding tissue was taken. The obtained samples were prepared for histological and immunohistochemical analyses.
For histological analysis, H&E staining was used to detect the host-implant reactions and new-bone formation. The samples were fixed in 4% paraformaldehyde for 24 h, decalcified in 10% EDTA for 2–4 weeks, embedded in paraffin, and cut using an RM2145 microtome (Leica, Solms, Germany) to yield 5-μm sections. The sections were then stained with H&E and evaluated under a light microscope (OLYMPUS BX50, OLYMPUS, Tokyo, Japan).
Immunohistochemical analysis of ALP and osteopontin (bone-specific protein) was performed by incubating the samples with rabbit anti-mouse COL-1α antibody and rabbit anti-mouse OCN antibody (Abcam, Cambridge, England) overnight at 4 °C. The samples were then incubated with a secondary antibody (SA1052; Boster, Beijing, China). The images were visualised using the same optical microscope.
Images were captured by Nikon DS-US camera, and analyzed by Nis-Elements. Briefly, four randomly-chosen images for each sample were analyzed with eight samples per condition, yield 32 images each group.
Biomechanical testing
Uniaxial tensile tests were performed using an all-purpose mechanical testing machine (MTS793; 0.05 mm/s, n = 5). The tested tendon was 170 mm in length and 3–5 mm in diameter.
Ethics statement
The DBM and tendon used for this study was provided by the Tissue Bank of First Affiliated Hospital of China People’s Liberation Army (CPLA) General Hospital (http://www.304guke.com/zzk/zzkjj/88.html), which has a formal consent process. The donors provided documented consent for donating the tissue samples after their death. The authors of this study had no access to the information that would identify donor patients associated with the bone tissue samples.
The animal research was approved by the Animal Care and Use Committee (IACUC) of Institute of Orthopedics, First Affiliated Hospital of CPLA General hospital. The entirety of this specific study, including all of the intervention procedures and the euthanasia, was approved by the IACUC. All procedures were carried out in accordance with the approved guidelines. Informed consent was obtained from all subjects for human tendon samples.
Statistical analysis
For quantitative tests, data are expressed as the mean ± standard deviation and were analysed using SPSS version 22 (SPSS, Chicago, IL). Tukey’s test was used for post-hoc multiple comparisons. A value of P < 0.05 was considered statistically significant.
Additional Information
How to cite this article: Zhao, Y. et al. Use of polyvinylpyrrolidone-iodine solution for sterilisation and preservation improves mechanical properties and osteogenesis of allografts. Sci. Rep. 6, 38669; doi: 10.1038/srep38669 (2016).
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
References
Chen, G. et al. Fresh-frozen complete extensor mechanism allograft versus autograft reconstruction in rabbits. Sci. Rep. 6, 22106 (2016).
Centers for Disease Control and Prevention (CDC). Invasive Streptococcus pyogenes after allograft implantation—Colorado. MMWR Morb. Mortal. Wkly. Rep. 52, 1174 (2003).
Kurtz, S. et al. Prevalence of primary and revision total hip and knee arthroplasty in the United States from 1990 through 2002. J. Bone Joint Surg. Am. 87, 1487–1497 (2005).
Curran, A. R., Adams, D. J., Gill, J. L., Steiner, M. E. & Scheller, A. D. The biomechanical effects of low-dose irradiation on bone-patellar tendon-bone allografts. Am J Sports Med 32, 1131–1135 (2004).
Schmidt, C. E. & Baier, J. M. Acellular vascular tissues: natural biomaterials for tissue repair and tissue engineering. Biomaterials 21, 2215–2231 (2000).
Badylak, S. F. Xenogeneic extracellular matrix as a scaffold for tissue reconstruction. Transpl Immunol 12, 367–377 (2004).
Crapo, P. M., Gilbert, T. W. & Badylak, S. F. An overview of tissue and whole organ decellularization processes. Biomaterials 32, 3233–3243 (2011).
Uzarski, J. S., Van, De., Walle, A. B. & McFetridge, P. S. Preimplantation processing of ex vivo-derived vascular biomaterials: effects on peripheral cell adhesion. J Biomed Mater Res A 101, 123–131 (2013).
Goktas, S. et al. Decellularization method influences early remodeling of an allogenic tissue scaffold. J Biomed Mater Res A 102A, 8–16 (2014).
Gilbert, T. W., Sellaro, T. L. & Badylak, S. F. Decellularization of tissues and organs. Biomaterials 27, 3675–3683 (2006).
Amensag, S. & McFetridge, P. S. Rolling the human amnion to engineer laminated vascular tissues. Tissue Eng Part C Methods 18, 903–912 (2012).
Vangsness, C. T., Triffon, M. J. & Joyce, M. J. Soft tissue for allograft reconstruction of the human knee: a survey of the American Association of Tissue Banks. Am J Sports Med 24, 230–234 (1996).
Campbell, D. G. & Li, P. Sterilization of HIV with irradiation: relevance to infected bone allografts. Aust N Z J Stirg 69, 517–521 (1999).
Campbell, D. G., Li, P., Stephenson, A. J. & Oakeshott, R. D. Sterilization oTHIV by gamma irradiation. A bone allograft model. Int Orthop 18, 172–176 (1994).
Fideler, B. M., Vangsness, C. T., Moore, T., Li, Z. & Rasheed, S. Effects of gamma irradiation on the human immunodeficiency virus: a study in frozen human bone-patellar ligament-bone grafts obtained From infected cadavera. J Bone Joint Surg Am 76, 1032–1035 (1994).
Allaveisi, F., Hashemi, B. & Mortazavi, S. M. J. Radioprotective effect of N-acetyl-L-cysteine free radical scavenger on compressive mechanical properties of the gamma sterilized cortical bone of bovine femur. Cell and tissue banking 16, 97–108 (2015).
Salehpour, A. et al. Dose-dependent response of gamma irradiation on mechanical properties and related biochemical composition of goat bone-patellar tendon-bone allografts. J Orthop Res 13, 898–906 (1995).
Akkus, O. & Rimnac, C. M. Fracture resistance of gamma radiation sterilized cortical bone allografts. J Orthop Res 19, 927–934 (2001).
Salehpour, A. et al. Dose-dependent response of gamma irradiation on mechanical properties and related biochemical composition of goat bone-patellar tendon-bone allografts. J Orthop Res 13, 898–906 (1995).
Rasmussen, T. J., Feder, S. M., Butler, D. L. & Noyes, F. R. The effects of 4 Mrad of gamma irradiation on the initial mechanical properties of bone-patellar tendon-bone allografts. Arthroscopy 10, 188–197 (1994).
Fideler, B. M., Vangsness, C. T. Jr, Lu, B., Orlando, C. & Moore, T. Gamma irradiation: effects on biomechanical properties of human bone-patellar tendon-bone allografts. Am J Sports Med 23, 643–646 (1995).
Bailey, A. J. & Tromans, W. J. Effects of ionizing radiation on the ultrastructure of collagen fibrils. Radiat Res 23, 145–155 (1964).
Salehpour, A. et al. A. Dose-dependent response of gamma irradiation on mechanical properties and related biochemical composition of goat bone-patellar tendon-bone allografts. J Orthop Res 13, 898–906 (1995).
Moreau, M. F. et al. Gamma irradiation of human bone allografts alters medullary lipids and releases toxic compounds for osteoblast-like cells. Biomaterials 21, 369–376 (2000).
Dziedzic-Goclawska, A., Kaminski, A., Uhrynowska-Tyszkiewicz, I. & Stachowicz, W. Irradiation as a safety procedure in tissue banking. Cell Tissue Bank 6, 201–219 (2005).
Nguyen, H., Morgan, D. A. & Forwood, M. R. Sterilization of allograft bone: Effects of gamma irradiation on allograft biology and biomechanics. Cell Tissue Bank 8, 93–105 (2007).
Gasser, T. C. et al. Failure properties of intraluminal thrombus in abdominal aortic aneurysm under static and pulsating mechanical loads. J vas surg 48, 179–188 (2008).
Okamoto, R. J. et al. Mechanical properties of dilated human ascending aorta. Annal Biomed Eng 30, 624–635 (2002).
Hawkins, J. A. et al. Immunogenicity of decellularized cryopreserved allografts in pediatric cardiac surgery: comparison with standard cryopreserved allografts. J thorac cardiovascular surg 126, 247–252 (2003).
White, A., Burns, D. & Christensen, T. W. Effective terminal sterilization using supercritical carbon dioxide. J biotechnol 123, 504–515 (2006).
Some, S. et al. Graphene-Iodine Nanocomposites: Highly Potent Bacterial Inhibitors that are Bio-compatible with Human Cells. Sci Rep 6, (2016).
Reimer, K. et al. Antimicrobial effectiveness of povidone-iodine and consequences for new application areas. Dermatology 204, 114–120 (2002).
Fleischer, W. & Reimer, K. Povidone-iodine in antisepsis–state of the art. Dermatology 195, 3–9 (1997).
Niedner, R. Cytotoxicity and sensitization of povidone-lodine and other frequently used anti-infective agents. Dermatology 195, 89–92 (1997).
Schmidlin, P. R., Imfeld, T., Sahrmann, P., Tchouboukov, A. & Weber, F. E. Effect of shorttime povidone–iodine application on osteoblast proliferation and differentiation. Open Dent J 3, 208–212 (2009).
Jiang, Y. et al. Incorporation of bioactive polyvinylpyrrolidone–iodine within bilayered collagen scaffolds enhances the differentiation and subchondral osteogenesis of mesenchymal stem cells. Acta biomaterialia 9, 8089–8098 (2013).
Zhao, Y. et al. Enhanced osteogenesis of polyvinylpyrrolidone-iodine as a sterilizing agent for preservation of allografts. J Biomat Tissu Eng 5, 465–471 (2015).
Lützner, J. et al. Surgical options for patients with osteoarthritis of the knee. Nat Review Rheumat 5, 309–316 (2009).
Fournel, I. et al. Meta‐analysis of intraoperative povidone–iodine application to prevent surgical‐site infection. British J Surg 97, 1603–1613 (2010).
Brown, N. M. et al. Dilute betadine lavage before closure for the prevention of acute postoperative deep periprosthetic joint infection. J Arthroplasty 27, 27–30 (2012).
Soyer, J., Rouil, M. & Castel, O. The effect of 10% povidone–iodine solution on contaminated bone allografts. J Hospital Infection 50, 183–187 (2002).
Mardas, M. et al. Time-dependent changes in dynamic mechanical properties of irradiated bone. Bio-Med Mater Eng 25, 397–403 (2015).
Anderson, M. J., Keyak, J. H. & Skinner, H. B. Compressive mechanical properties of human cancellous bone after gamma irradiation. J Bone Joint Surg Am 74, 747–752 (1992).
Akkus, O. & Rimnac, C. M. Fracture resistance of gamma radiation sterilized cortical bone allografts. J Orthop Res 19, 927–934 (2001).
Sutha, K. et al. Osteogenic embryoid body-derived material induces bone formation in vivo. Sci Rep 11, 9960 (2015).
Sung, N. Y. & Choi, J. Enhanced release of bone morphogenetic proteins from demineralized bone matrix by gamma irradiation. Radia Phys Chem 111, 62–66 (2015).
Chang, C. T., Amack, J. D. & Whipps, C. M. Zebrafish Embryo Disinfection with Povidone–Iodine: Evaluating an Alternative to Chlorine Bleach. Zebrafish 13, S-96–S-101 (2016).
Li, S. H. et al. Experimental study on the toxicity of povidone-iodine solution in brain tissues of rabbits. Inter J Clinic Experimental Medicin 8, 14863 (2015).
Sato, S. et al. Povidone-iodine-induced cell death in cultured human epithelial HeLa cells and rat oral mucosal tissue. Drug and chemical toxicology 37(3), 268–275 (2014).
Bellows, C. G., Reimers, S. M. & Heersche, J. N. M. Expression of mRNAs for type-I collagen, bone sialoprotein, osteocalcin, and osteopontin at different stages of osteoblastic differentiation and their regulation by 1, 25 dihydroxyvitamin D3. Cell Tissu Res 297, 249–259 (1999).
Leiterer, M., Truckenbrodt, D. & Franke, K. Determination of iodine species in milk using ion chromatographic separation and ICP-MS detection. Eur Food Res Technol 213, 150–153 (2001).
Crawford, C. et al. Investigation of postoperative allograft-associated infections in patients who underwent musculoskeletal allograft implantation. Clin Infectious Diseases 41, 195–200 (2005).
Rasmussen, T. J. et al. The effects of 4 Mrad of γ irradiation on the initial mechanical properties of bone-patellar tendon-bone grafts. Arthroscopy. J Arthroscopic & Related Surg 10, 188–197 (1994).
Urist, M. R. & Dowell, T. A. Inductive substratum for osteogenesis in pellets of particulate bone matrix. Clin Orthop Relat Res 61, 61 (1968).
Zhang N. et al. Orthodontic cement with protein-repellent and antibacterial properties and the release of calcium and phosphate ions. J Dent 50, 51–59 (2016).
Acknowledgements
We thank Dr. Michael D. Weir for proof reading of the paper. This work was supported by the National Natural Science Foundation of China (81400486, 81672130 and 81371179), the Natural Science Foundation of Jiangsu Province (BK20140911 and BK20150048), the Postdoctoral Science Foundation of Jiangsu Province (1402044B), the China Postdoctoral Science Foundation (2015M571647), a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD, 2014-37), National Key Research Project (2016YFA0201704/2016YFA0201700), the Key Military Medical Projects of CPLA (13CXZ028, AWS14C007), Beijing Natural Science Foundation (7152144), Beijing Science Nova Program (Z1511000003150134), and Jiangsu Government Scholarship for Overseas Studies (JS-2014-065).
Author information
Authors and Affiliations
Contributions
Y.X., Y.Z., X.H. and Z.L. conceived the project and wrote manuscript. Y.X., H.Z., S.H., F.W. and N.G. designed the experiments. Y.Z., X.H. and Z.L. prepared the materials. Y.X., Y.Z., X.H., and Z.L. carried out the animal experiments, the cell culturing, and the measurements. F.W. and F.Z. provided advice on cell culturing and modified the manuscript. All authors have reviewed the manuscript.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Zhao, Y., Hu, X., Li, Z. et al. Use of polyvinylpyrrolidone-iodine solution for sterilisation and preservation improves mechanical properties and osteogenesis of allografts. Sci Rep 6, 38669 (2016). https://doi.org/10.1038/srep38669
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep38669
- Springer Nature Limited