Abstract
This review is devoted to the study of charm production in ep and pp collisions. The total set of measurements obtained by the two collaborations H1 and ZEUS from HERA and their combination is outlined, as well as complementary data obtained by the LHCb Collaboration at the LHC. After fitting the parton distribution functions the charm-production cross sections are predicted within perturbative QCD at next-to-leading order using the fixed-flavour-number scheme. Agreement with the data is found. The combined HERA charm data are sensitive to the c-quark mass and enabled its accurate determination. The predictions crucially depend upon the knowledge of the gluon distribution function. It is shown that the shape of the gluon distribution based on the HERA data is considerably improved by adding the measurements from LHCb and applicable down to values x of about \(10^{-6}\), where x is the proton momentum fraction carried by a parton.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
The HERA collider was the first and unique machine in which electrons and protons were collided. It emerged from a series of earlier lepton–nucleon accelerator studies as the highest energy electron–proton collider to investigate simultaneously neutral and charged current reactions and their electroweak unification. The pointlike electron serves as probe to study the internal structure of the proton governed by strong interactions, i.e. quantum chromodynamics (QCD). The generic electron–proton scattering process occurs via the exchange of an electroweak boson. The uniqueness of HERA consists in the clean distinction between electroweak and strong processes. The precise knowledge of electroweak interactions makes HERA ideal for investigation of QCD.
Measurements of deep inelastic scattering (DIS) at HERA have been the central topic in the investigation of the proton structure for the two collider experiments, H1 and ZEUS [1, 2]. Such measurements are the core data to determine the proton structure in terms of parton distribution functions (PDFs). The inclusive cross section at HERA contains contributions from all active quark and antiquark flavours. It is remarkable that a large contribution, up to one third, is coming from events with charm. This necessitates the understanding of heavy-flavour production for global QCD analyses of HERA data and is the main subject of the present review.
The tests of perturbative QCD depend on phenomenological input, in particular on the knowledge of the gluon distribution function. For this reason an additional piece has been included in the analysis coming from charm production in the LHCb experiment at the large hadron collider (LHC).
This review describes various aspects of heavy-flavour physics at HERA and LHC. It presents one new measurement of charm production at HERA, which is further combined with other precise H1 and ZEUS charm measurements in order to obtain the most precise charm dataset from HERA. These combined data are extensively used in a comparison of data and theory and in a QCD analysis to extract the c-quark mass. Another combination is performed at the more exclusive level of \(D^{*+}\) visible cross sections. In contrast to the inclusive one, it does not include theory-related uncertainties. Furthermore, charm and beauty measurements from LHCb are considered and included in a QCD analysis. They provide sensitivity to the gluon distribution at low values of fractions of the proton momenta carried by a parton. This is a kinematic range that is currently not covered by other input data, and therefore improves the PDF fits.
The review is organised in the following way. Section 2 introduces the theoretical concepts, relevant for the subsequent contents. Section 3 gives a description of the HERA experimental set-up, while Sect. 4 describes tagging techniques used to measure charm production at HERA and presents existing measurements. Section 5 deals with the new physics results, the measurement of \(D^{+}\)-meson production performed with the ZEUS detector at HERA. Section 6 describes a combination of charm measurements from H1 and ZEUS, performed at the two levels: for \(D^{*+}\) visible cross sections and for inclusive reduced charm cross sections. Section 7 switches to the LHC: it introduces measurements of heavy-flavour productions at the LHCb experiment and discusses the impact of the phase-space coverage which is comprementary to the one from HERA. Section 8 presents a QCD analysis including the LHCb heavy-flavour data. Finally, Sect. 9 summarises the results.
This review is based on the Ph.D. thesis of the author [3]. The physics results presented in detail in Sects. 5–8 were part of the work for the thesis, and later on most of them were published [4,5,6].
2 Theoretical overview of heavy-flavour production in QCD
Section 2.1 gives a short introduction to perturbative calculations in QCD. Section 2.2 discusses ways of treating of heavy-quark production and focuses on the fixed-flavour-number scheme, the preferred scheme in this review. In Sect. 2.3 various defintions of the heavy-quark mass are given. Sections 2.4 and 2.5 are the central part of this theoretical overview: they provide information on the current status of the calculations for heavy-quark production in different schemes in \(ep\) and \(pp\) collisions, respectively. Section 2.6 reviews an important non-perturbative aspect of heavy-flavour production: the fragmentation process of partons into hadrons. Finally, Sect. 2.7 gives a summary.
2.1 Perturbative calculations
In the approach of perturbative QCD (pQCD), any physical quantity, \(\varGamma \), is given as a power series in the strong coupling constant, \(\alpha _s=g^2/4\pi \), where g is the constant representing the coupling strength in the QCD Lagrangian:
where n is the order of the calculation and the coefficients \(c_i\) are determined using the Feynman rules. Contributions to the perturbative expansion of scattering amplitudes beyond the leading order (LO) are usually formally divergent. In order to regularise these divergences, different renormalisation schemes exist. Moreover, in subtracting the divergences in any renormalisation scheme, an arbitrary mass scale is introduced, known as the renormalisation scale, \(\mu _r\). Most commonly the modified minimal subtraction scheme, \(\overline{\mathrm{MS}}\), is used [7]. The renormalised coupling, \(g_r\), turns out to be scale dependent; keeping only the one-loop order, the running coupling is given by
where the constant of integration \(\varLambda _\mathrm{QCD}\) is a dimensionful quantity, known as the QCD scale, \(\beta _0=(33-2n_f)/(48\pi ^2)\) is the one-loop beta-function coefficient with \(n_f\) being the number of massless quark flavours. The strong coupling can be determined through experimental observables, e.g. jet-production cross sections, event shapes, \(\tau \) decay width etc. The measurements of \(\alpha _s\) as a function of the energy scale are shown in Fig. 1 [8]. The running of \(\alpha _s\) agrees with the expectation from pQCD.
The renormalised coupling decreases as the relevant momentum scale grows. This behaviour is known as asymptotic freedom; it enables perturbative calculations at large momentum scales (short distances). On the other hand, the perturbative approach breaks down at \(\varLambda _\mathrm{QCD}\) (long distances) as the coupling gets too large. This phenomenon is known as confinement. Quarks and gluons are not observed as free particles, because, with increasing distance between them, the production of a new quark–antiquark pair instead is energetically preferred.
Because of confinement hadrons are considered to be made up of massless constituents, known as partons, held together by their mutual interactions. Application of perturbative calculations to any process involving hadrons requires factorisation of short- and long-distance effects [9]. To define the separation, an arbitrary mass scale appears, known as the factorisation scale, \(\mu _f\). It is introduced in a way similar to the way the renormalisation scale \(\mu _r\) appears in renormalisation, although it serves different purposes. In the factorisation approach hadrons are described by parton distribution functions (PDFs), which are not perturbatively calculable and must be extracted from data; however, pQCD predicts their evolution with \(\mu _f\) (see Sect. 2.4.2 for more details).
Thus the region where pQCD calculations are reliable is given by \(\mu _r,\mu _f \gg \varLambda _\mathrm{QCD}\). One usually chooses the two scales to be of the order of the energy involved in the hard process; e.g. for the inclusive production of heavy quarks \(\mu _r^2=\mu _f^2= m_Q^2\) is a possible choice, where \(m_Q\) denotes the heavy-quark mass (see e.g. [10] for an exhaustive discussion).
2.2 Treatment of heavy flavours in pQCD
The masses of the heavy quarks satisfy \(m_Q\gg \varLambda _\mathrm{QCD}\) (\(m_c \approx {1.5}~\mathrm{GeV}\), \(m_b \approx {4.5}~\mathrm{GeV}\), \(m_t \approx {170}~\mathrm{GeV}\)) and then provide a hard scale for pQCD calculations. At the same time they complicate calculations, since the new hard scale leads to the appearance of terms proportional to \(\ln (\frac{p_T^2}{m_Q^2})\), where \(p_T\) is the transverse momentum of the produced heavy quark, known as the multi-scale problem. One has the freedom to treat the heavy quarks either as massive or massless in perturbative calculations; both choices have their advantages and disadvantages at different phase-space regions, as discussed below. The PDF evolution and \(\alpha _s\) running depend on the number of quark flavours assumed to be massless and appearing in loops and legs. Several schemes exist for the treatment of heavy flavours in pQCD.
In the present review in most cases the fixed-flavour-number scheme (FFNS) is used in comparisons of theory with the data, since it provides most reliable predictions in the phase space of existing experimental data. In this scheme, heavy quarks are treated as massive at all energy scales, thus they do not enter the PDF evolution of massless quarks and gluons and \(\alpha _s\) running.Footnote 1 One has to specify which particular quark flavours are treated as massless, e.g. the number of flavours \(n_f = 3\) for massless u, d and s. The FFNS is expected to be most precise in the threshold region \(p_T^2 \sim m_Q^2\), while at high \(p_T\) terms proportional to \(\ln (\frac{p_T^2}{m_Q^2})\) may spoil the convergence of the perturbative series.
Other schemes are known as variants of the variable-flavour-number scheme (VFNS), in which heavy quarks are treated as massive or massless depending on the energy scale:
-
In the zero-mass variable-flavour-number scheme (ZM-VFNS) [14], heavy flavours are treated as infinitely massive (and thus completely vanishing) below a certain threshold and as massless above it. This scheme is expected to be appropriate at high energy scales, since the PDF evolution of the heavy quarks and the renormalisation of collinear and infrared singularities provides a resummation of terms proportional to \(\ln \frac{p_T^2}{m_Q^2}\).
-
In the general-mass variable-flavour-number scheme (GM-VFNS), an interpolation is made between the FFNS and the ZM-VFNS, avoiding double counting of common terms in the PDF evolution and coefficient functions. This scheme is expected to combine the advantages of the FFNS and ZM-VFNS, although some level of arbitrariness is unavoidably introduced in the treatment of the interpolation. Therefore, different variants of the GM-VFNS are available [15,16,17,18,19,20,21,22]. Moreover, this arbitrariness prevents a clear interpretation of the heavy-quark masses in terms of a specific scheme; therefore the heavy-quark masses in GM-VFNS must be treated as effective mass parameters.Footnote 2
In the context of VFNS many non-perturbative models, particularly those based on the light-cone wave-function picture, expect an “intrinsic-charm” component of the nucleon at an energy scale comparable to the c-quark mass. This intrinsic-charm component, if present at a low-energy scale, will participate fully in QCD dynamics and evolve along with the other partons as the energy scale increases; for more details see, e.g. [24] and the references therein. Such models predict a sizeable intrinsic-charm contribution to heavy-flavour production, but in the phase-space regions which are difficult to probe with currently available experimental data [25] (see Sect. 7.2.1). In the recent analysis [26] some evidence was found that the intrinsic charm PDF at large parton momentum and low-energy scale carries about 1% of the total momentum of the proton. Future LHC data are expected to further constrain a possible intrinsic-charm component of the proton.
2.3 Quark masses
Since free quarks are unobservable, one can consider different definitions of the quark mass \(m_Q\). One of the most popular choices is the pole quark mass, \(m_Q^\mathrm{pole}\), defined as the mass at the position of the pole in the quark propagator in perturbation theory. This quantity is introduced in a gauge invariant way and is well defined in each finite order of perturbation theory. This convenient feature has made it very popular and widely used in perturbative calculations, although it has an important drawback: any definition of this quantity suffers from an intrinsic uncertainty of order \(\frac{\varLambda _\mathrm{QCD}}{m_Q}\). The problem arises for the reason that the pole mass is sensitive to large-distance dynamics (infrared contributions).Footnote 3
Alternative mass definitions avoid this problem. The most prominent example is the \(\overline{\mathrm{MS}}\) mass, \(m_Q(\mu _r)\), which is to be evaluated at the renormalisation scale \(\mu _r\), where \(\mu _r\gg \varLambda _\mathrm{QCD}\), and which is free of ambiguities of order \(\varLambda _\mathrm{QCD}\). One benefit of theoretical predictions using the \(\overline{\mathrm{MS}}\) mass is improved stability of the perturbative series with respect to scale variations as compared with the result in the pole-mass scheme [28]. The scale dependence of the running mass at LO is given by
Here \(m_Q(m_Q)\) denotes the \(\overline{\mathrm{MS}}\) running mass evaluated at the scale \(\mu _r=m_Q\).
The scale dependence of the charm and beauty running masses has been measured at LEP and HERAFootnote 4 [29,30,31] and is shown in Fig. 2. It is found to be consistent with the QCD expectation.
The relation between the pole mass \(m_Q^\mathrm{pole}\) and the \(\overline{\mathrm{MS}}\) running mass \(m_Q(m_Q)\) is known to three loops [32,33,34,35]; at one-loop order it is given by
2.4 Heavy-quark production in \(ep\) collisions
Heavy-quark production in deep inelastic \(ep\) scattering collisions serves as a test of pQCD (see Sects. 5 and 6); moreover, it is directly sensitive to the gluon density of the proton and to the heavy-quark masses (see Sect. 6.5.3). The charm contribution to the inclusive cross section at HERA reaches \(30\%\) [36], thus necessitating its understanding for any global QCD analysis based on HERA data. The contents of this Section is partially based on [37], where more details can be found.
2.4.1 Kinematics of \(ep\) collisions and heavy-flavour structure functions
The generic electron–protonFootnote 5 scattering process, \(ep \rightarrow l^{\prime }X\), where \(l^{\prime }\) is the scattered lepton and X is the hadronic final state, is shown in Fig. 3. It occurs via the exchange of an electroweak boson \(V^{*}\) (the superscript \({}^{*}\) denotes an intermediate vector boson) of two types:
-
a neutral \(\gamma \) or \(Z^{0}\) boson; these reactions are called neutral current (NC);
-
a charged \(W^{\pm }\) boson; these reactions are called charged current (CC).
Denoting the incoming electron and proton four-momenta with k and p, respectively, and the scattered-lepton four-momentum with \({k^{\prime }}\), the event kinematics can be described by the following Lorentz invariant variables:
\(Q^2\) is the virtuality of the exchanged boson, \(W^2\) is the boson–proton energy squared, x and y are Bjorken scaling variables. The y variable is also referred to as inelasticity. The variables x, y and \(Q^2\) are related by
with \(s = 2 k \cdot p \approx s_\mathrm{tot}\) approximately equal to the centre-of-mass energy \(s_\mathrm{tot}\) of the experiment.
The virtuality \(Q^2\) can be interpreted as the power with which the exchanged boson can resolve the proton structure. Depending on \(Q^2\), the \(ep\) scattering phase space is divided into two regions:
-
deep inelastic scattering (DIS), if \(Q^2 \gtrsim {1 }\, {\mathrm{GeV}^2}\);
-
photoproduction (PHP), if \(Q^2 \approx {0 } \, {\mathrm{GeV}^2}\).
The inelasticity y defines the relative fraction of the electron energy transferred to the hadronic system in the proton rest frame, while the Bjorken variable x determines the relative fraction of the proton energy involved in the partonic subprocess. More details as regards \(ep\) scattering physics, including description of the quark-parton model (QPM), can be found for instance in [38].
2.4.2 Factorisation approach
The inclusive differential cross section of heavy-flavour production in DIS, \(\frac{\text {d}^2\sigma ^{Q\bar{Q}}}{\text {d}x \text {d}Q^2}\), where \(Q\bar{Q}\) stands for c or b quark–antiquark pairs (top production is not accessible at HERA), is expressed in terms of the dimensionless reduced cross sections:
where \(\alpha \) is the running electromagnetic coupling. The reduced cross sections can be expressed in terms of the heavy-flavour structure functions \(F_2^{Q\bar{Q}}\), \(F_L^{Q\bar{Q}}\):
Here the term proportional to the parity-violating structure function, \(xF_3\), is neglected since \(Q^2 \ll M^2_Z\), where \(M_Z\) is the \(Z^0\)-boson mass. Conventionally the structure functions \(F_2^{Q\bar{Q}}\), \(F_L^{Q\bar{Q}}\) are defined at the Born level without QED and electroweak radiative corrections, except for the running electromagnetic coupling \(\alpha =\alpha (Q^2)\). The heavy-flavour structure functions are predicted in the FFNS using light-flavour PDFs as input and the factorisation approach, which gives the field-theory realisation of the parton model in the form of the theorem of the separation of the long-distance from the short-distance dependence for DIS [9]. This theorem states that the sum of all the diagrammatic contributions to the structure functions is a direct generalisation of the parton-model results, given by
where i denotes the sum over all partons (massless quarks, antiquarks and gluons), \(\xi \) is the momentum fraction of the parton i, which goes from \(x / x_\mathrm{max}\) to 1, \(x_\mathrm{max} = \frac{1}{1 + 4M^2/Q^2}\), \(M = m_Q^\mathrm{pole}\) is the heavy-quark pole mass, \(C^{Q\bar{Q}~i}_{2,L}\) are the heavy-flavour coefficient functions (known also as the hard-scattering functions, or Wilson coefficients, or matrix elements) and \(f_i\) are the massless PDFs. The factorisation scale \(\mu _f\) serves to define the separation of short-distance from long-distance effects: any propagator that is off-shell by \(\mu _f^2\) or more will contribute to \(C^{Q\bar{Q}~i}_{2,L}\), while below this scale it will be absorbed into \(f_i\). Note that the left-hand side of Eq. (2.9), which is an observable quantity, does not depend on arbitrary scales \(\mu _r\) and \(\mu _f\) by definition. This is a requirement of the factorisation theorem. However, if the right-hand side of Eq. (2.9) is expressed as a perturbative series truncated at a certain order, the calculated value for the observable turns out to be scale dependent due to the neglected orders. For the actual calculation of \(F^{Q\bar{Q}}_{2,L}(x,Q^2)\) one sets the two scales to some fixed values and varies them within a certain range to estimate the effect of the missing higher-order corrections. The \(C^{Q\bar{Q}~i}_{2,L}\) are calculated in perturbation theory (see Sect. 2.4.3) but the \(f_i\) must be extracted by comparing Eq. (2.9) with some standard set of cross sections.
The factorisation prescription is not unique and allows different choices. A set of rules that defines these choices is called a factorisation scheme. Common factorisation schemes are \(\overline{\mathrm{MS}}\) [7] or DIS [39, 40]. Within such a scheme the PDFs have no physical meaning, since they are dominated by infrared effects and thus by infrared parameters that cannot be measured, although they can be extracted from data by comparing the theoretical calculation of Eq. (2.9) with measured cross sections. The factorisation theorem ensures that the hard-scattering functions determined in this calculation are insensitive to infrared scales and parameters, and are applicable to cross sections calculated with phenomenologically determined PDFs.
A remarkable consequence of factorisation is that measuring PDFs for one scale \({\mu _f}_1\) allows their prediction for any other scale \({\mu _f}_2\), as long as both \({\mu _f}_1\) and \({\mu _f}_2\) are large enough which means both \(\alpha _s({\mu _f}_1)\) and \(\alpha _s({\mu _f}_2)\) are small. The evolution of PDFs in \(\mu _f\) is most often, and most conveniently, described in terms of the integro-differential Dokshitzer–Gribov–Lipatov–Altarelli–Parisi (DGLAP) equations [41,42,43,44,45,46,47]:
The evolution kernels \(P_{ij}(x)\), or the splitting functions, are given by perturbative expansions, beginning with \(O(\alpha _s)\); they represent the probability of a parton i to emit a parton j carrying a fraction \(z=\frac{x}{\xi }\) of the momentum of the parton i.
Note that the integral on the right-hand side of Eq. (2.10) begins at x. Thus, it is only necessary to know \(f_i(\xi ,{\mu _f}_1^2)\) for \(\xi > x\) at some starting value of the scale \({\mu _f}_1\), in order to derive \(f_i(x,{\mu _f}_2^2)\) at a higher value \({\mu _f}_2 > {\mu _f}_1\). This is a great simplification, since data at small x are hard to obtain at moderate energies.
At very low values of x, terms proportional to \(\alpha _s \ln (\frac{1}{x})\) may spoil the accuracy of the DGLAP approach; there other evolution schemes, e.g. BFKL [48,49,50] or CCFM [51,52,53,54], might be more appropriate to use. The difference between the schemes comes from the ordering of the emitted partons before entering the hard-scattering process.
Since the perturbative series is truncated at a certain order, the approximation is \(\mu _f\) dependent due to neglected orders. In practice the two scales are often set to be equal, although it is not a requirement. To estimate the perturbative uncertainties of the neglected higher orders, the \(\mu _r\) and \(\mu _f\) scales are varied around the central values, simultaneously or independently.
2.4.3 Calculations in FFNS
In the FFNS with \(n_f=3\) there are no c and b quarks in the proton at any scale, therefore the leading-order (LO) process (\(\mathcal{O}(\alpha _s)\)) for heavy-flavour production in DIS is the boson–gluon-fusion (BGF) process [55,56,57,58,59], \(g\gamma ^{*} \rightarrow Q\bar{Q}\), shown in Fig. 4. The corresponding hard-scattering functions \(C^{g\gamma ^{*} \rightarrow Q\bar{Q}~(0)}_{2,L}\) are given by
where \(e_c = +2/3\) is the c-quark charge in units of the proton charge, \(\epsilon = \frac{{M}^2}{Q^2}\), \(M = m_Q^\mathrm{pole}\) is the heavy-quark pole mass, \(\nu = \sqrt{1 - 4\epsilon \frac{z}{1-z}}\) and \(z \equiv \frac{x}{\xi }\) running from x to \(\frac{1}{1+4\epsilon }\). Note that the LO hard-scattering functions in Eq. (2.11) do not depend on the factorisation and renormalisation scales (the dependence on the latter appears only via the strong coupling), therefore the structure functions in Eq. (2.9), calculated at LO, necessarily turn out to be dependent on these arbitrary scales. For higher-order calculations this dependence partially cancels in the convolution of the hard-scattering functions, PDFs and running strong coupling. The two scales are chosen to be of the order of \(Q^2\) or \(M^2\); a typical choice is \(\mu _r^2=\mu _f^2= Q^2 + 4M^2\) [60].
Next-to-leading-order (NLO) corrections (\(O(\alpha _s^2)\)) were calculated in [61, 62]. They can be classified into three groups:
-
1.
real corrections to the BGF process, i.e. all processes containing an extra gluon in the final state \(g\gamma ^{*} \rightarrow Q\bar{Q}g\);
-
2.
virtual corrections to the BGF process coming from the interference of \(O(\alpha _s)\) and \(O(\alpha _s^3)\) terms;
-
3.
a new process, when the virtual photon interacts with a light quark q in the proton: \(\gamma ^{*}q(\bar{q}) \rightarrow Q\bar{Q}q(\bar{q})\).
The NLO predictions [61, 62] are available in the HVQDIS program [63], which calculates fully differential double-particle inclusive cross sections. The pole-mass definition is used in these calculations. The NLO corrections for charm production are important as they change both the shape and normalisation of the transverse momentum, pseudorapidity, and x distributions, while the \(Q^2\) distribution only receives a shift in normalisation [63]. In the kinematic region of HERA, the scale dependence of the NLO calculations for charm production is moderate: it varies from \(10\%\) at high \(Q^2\) to \(30\%\) at low \(Q^2\) (see Sects. 5.8, 6.4.1 and 6.5.3).
In a recent variant of the FFNS from the ABM group the running-mass definition in the \(\overline{\mathrm{MS}}\) scheme is used [28]. This scheme has the advantage of improving the convergence of the perturbative series (see Sect. 2.3). These predictions are provided for inclusive quantities only, i.e. at the \(F_{2,L}^{Q\bar{Q}}\) level.
At next-to-next-to-leading order (NNLO) (\(O(\alpha _s^3)\)) only approximate calculations are available. For \(F_2\), four out of the five massive Wilson coefficients are known at large scales \(Q^2\) [64,65,66,67,68], and an estimate has been made for the remaining coefficient [69] based on the anticipated small-x behavior, a series of moments [70], and two-loop operator matrix elements [71, 72]. e.g. in Ref. [69] combined approximate expressions for three kinematic limits are given: in the limit of high partonic centre-of-mass energy squared, \(\hat{s} \gg m_Q^2\), in the threshold region, \(\hat{s} \gtrsim 4m_Q^2\), and in the high-scale region \(Q^2 \gg m_Q^2\).
2.4.4 Calculations in VFNS
In the VFNS, the LO process for heavy-flavour production in \(ep\) collisions is the QPM scattering. At NLO, fully differential calculations exist only in the ZM-VFNS [73,74,75].
The main difference between the FFNS and ZM-VFNS mechanisms can be attributed to the fact that, for heavy-quark production in the FFNS, two heavy particles appear in the final state instead of one as in the case of the intrinsic heavy-quark approach.Footnote 6 This reveals itself in the \(p_T\)-distribution where for the FFNS the quark and antiquark appear back to back in the Breit frame. The heavy-flavour data from HERA [76, 77] clearly prefer the \(p_T\)-spectrum predicted by the FFNS production mechanism (see Fig. 13 in Sect. 4.1).
Calculations in the GM-VFNS for heavy-flavour production in DIS exist only at the inclusive \(F_2^{Q\bar{Q}}\) level. Some of the most popular GM-VFNS are the Thorne–Roberts (RT) [21, 78, 79], Aivazis–Collins–Olness–Tung (ACOT) [16] and FONLL [22] schemes. The calculations are available at NLO and (approximate) NNLO orders. Predictions from various variants of GM-VFNS were compared to the combined HERA charm data in [60]; they are generally found to describe the data well in the region \(Q^2 \gtrsim {5}\, \mathrm{GeV^2}\).
2.5 Heavy-quark production in \(pp\) collisions
Similar to the case of \(ep\) collisions, heavy-quark production in hadronic collisions is interesting either as a benchmark process for the study of pQCD or as a probe of the nucleon structure [80]. Most important examples of the latter are:
-
inclusive heavy-flavour production at high energy mostly probes the gluon density of the proton, since the leading process is \(gg \rightarrow Q\bar{Q}\) [6, 81, 82]. This covers a wide kinematic range, because a hard scale provided by the mass of heavy quarks allows applicability of pQCD even at low transverse momentum \(p_T \sim \varLambda _\mathrm{QCD}\);
-
\(W^{\pm }+c\) final states probe the strange-quark content of the proton, since the LO production mechanism is \(gs \rightarrow W^{\pm }c\) [83].
The understanding of heavy-quark production is also important in searches for possible new physics, where QCD-initiated heavy-quark final states cause large backgrounds for such analyses. The contents of this section is partially based on [80, 84], where more details can be found.
The cross sections for heavy-flavour production in \(pp\) collisions are calculated in pQCD using the factorisation approach, similar to Eq. (2.9):
Here the sum in i, j goes over all relevant partons, \(\hat{\sigma }_{ij \rightarrow Q\bar{Q}}\) is the perturbatively calculated partonic cross section, \(x_1\), \(x_2\) are momentum fractions carried by the two incoming partons, and \(f_i\), \(f_j\) are the PDFs, introduced in Sect. 2.4.2, for the two incoming protons \(p_1\) and \(p_2\). Note that similarly to Eq. (2.9) the left-hand side of Eq. (2.12) is an observable quantity and does not depend on scales \(\mu _r\) and \(\mu _f\) by definition.
In the FFNS at LO (\(O(\alpha _s^2)\)) two processes are responsible for heavy-quark production:
The diagrams are shown in Fig. 5 and the corresponding differential partonic cross sections are [56, 85,86,87,88,89]
where \(N=3\) is the number of colours, \(V=N^2-1=8\) is the dimension of the \(\mathrm{SU}(3)\) gauge group, i.e. the number of gluons, \(\hat{s} = (x_1 p_1 + x_2 p_2)^2\) is the squared partonic centre-of-mass energy, \(\tau _{1,2} = (1 \mp \beta \mathrm{cos}\theta )/2\), \(\theta \) is the partonic scattering angle, \(\rho = 4M^2/\hat{s}\), \(\beta = \sqrt{1-\rho }\), \(M = m_Q^\mathrm{pole}\) is the heavy-quark pole mass, and \(\mathrm{d}\phi _{(2)}\) is the two-body phase-space element given by
The total production cross section for heavy quarks is finite at LO, owing to the fact that M is the minimum virtuality exchanged in the t-channel, therefore no poles can develop in the intermediate propagators. This is not the case for light quarks: the total production cross section for u or d quarks is not calculable in pQCD [80]. Note that the LO partonic cross sections in Eq. (2.14), similarly to the LO hard-scattering functions in Eq. (2.11), do not depend on the factorisation and renormalisation scales, except for the \(\alpha _s^2(\mu _r^2)\) dependence. The scales are chosen to be of the order of the energy involved in the hard process. A typical choice is \(\mu _r^2=\mu _f^2= M^2\) or \(\mu _r^2=\mu _f^2= M^2 + \langle p_T^2 \rangle \), where \(\langle p_T^2 \rangle \) is the average squared transverse momentum of the produced heavy quark and antiquark. Other possible choices are the off-shell of the internal lines in the diagrams in Fig. 5 \(\mu _r^2=\mu _f^2=\hat{s}\), \(\mu _r^2=\mu _f^2=M^2-(g-c)^2\) or \(\mu _r^2=\mu _f^2=M^2-(g-\bar{c})^2\) (see e.g. [86]).
The total partonic cross section can be obtained by integrating over the partonic scattering angle:
where \(L(\beta )=\frac{1}{\beta }\mathrm{log}\left( \frac{1+\beta }{1-\beta }\right) - 2\).
At large \(\hat{s}\) the \(q\bar{q}\) rate drops more quickly than gg, as can be seen from Eq. (2.16) (this remains true also when NLO effects are considered). In addition, threshold effects for the \(q\bar{q}\) channel vanish very quickly as soon as \(\hat{s} > 4m_Q^2\); this is related to the spin 1/2 of quarks [80].
To calculate the differential hadronic cross section of Eq. (2.12), the partonic cross section in Eq. (2.14) needs to be convoluted with the PDFs in the hadrons. The kinematics of the final state can be parametrised in terms of the transverse momenta \({p_T}_1\), \({p_T}_2\) and rapidities \(y_1\), \(y_2\) of the produced quark and antiquark, which are related at LO to the parton momentum fractions \(x_1\), \(x_2\):
where \(\epsilon = \sqrt{s}/M_{T}\), \(M_{T} = \sqrt{M^2+p_T^2}\), \(p_T = {p_T}_1 = {p_T}_2\) and s is the squared hadron centre-of-mass energy. The resulting phase-space element is
and the differential cross section at LO is
As can be seen from Eq. (2.19), for a fixed value of \(p_T\) the rate is suppressed when \(|y_1-y_2|\) becomes large, therefore the quark and antiquark tend to be produced with the same rapidity. At the LHC the bulk of the contribution to heavy-flavour production directly probes the gluon content of the proton and serves to improve its knowledge over the HERA determination (see Sect. 8).
2.5.1 MNR calculations
NLO corrections come from two sources of \(O(\alpha _s^3)\) diagrams: real- and virtual-emission diagrams. In the first case, the corrections come from the square of the real-emission matrix elements; in the second case, from the interference of the virtual matrix elements (of \(O(\alpha _s^4)\)) with the tree-level ones (of \(O(\alpha _s^2)\)). Ultraviolet divergences in the virtual diagrams are removed by the renormalisation process. Infrared and collinear divergences, which appear both in the virtual diagrams and in the integration over the emitted parton in the real-emission processes, cancel each other or are absorbed in the PDFs. The complete calculations of NLO corrections to the production of heavy-quark pairs in hadro- and in photoproduction were done in [90, 91] (total hadroproduction cross sections), [92, 93] (one-particle inclusive distributions in hadroproduction), [94, 95] (total and one-particle inclusive distributions in \(ep\) photoproduction) [96] (two-particle inclusive distributions in hadroproduction) and [97] (two-particle inclusive distributions in \(ep\) photoproduction). They are known as Mangano–Nason–Ridolfi (MNR) calculations and are available in the MNR program [98], which calculates double- or single-particle inclusive or total cross sections. The pole-mass definition is used in the calculations.
There are a few important remarks concerning the NLO calculations:
-
no collinear singularities appear when gluons are emitted from the final-state heavy quarks, since they are screened by the heavy-quark mass. Therefore, contrary to the case of a light parton, the \(p_T\) distribution for a heavy quark is a well-defined quantity in NLO. For light partons, a collinear singularity would be encountered that requires the introduction of a fragmentation function, not calculable from first principles (see also Sect. 2.6);
-
at large \(p_T\), nevertheless, large \(\ln (p_T/m_Q)\) factors appear, signalling the increased probability of collinear gluon emission. At large \(p_T\), the massive quark behaves similar to a massless particle. These logarithms can be resummed using the fragmentation-function formalism (see Sect. 2.5.2);
-
new processes appear at NLO which drastically change the \(\hat{s}\) dependence of the cross sections and/or the kinematic distributions;
-
there is evidence, however, that NLO is not sufficient to get accurate estimates, since a large scale dependence is still present. This is demonstrated in Fig. 6, which shows as an example the scale dependence of the inclusive \(p_T\) distribution of b quarks at the Tevatron. At the LHC, the estimated uncertainty is of the order of \(50\%\) for b-quark production, and it is even larger for c-quark production, owing to the smaller value of the c-quark mass. Large scale dependence is a symptom of large NNLO corrections.Footnote 7
For an extensive and a more quantitative analysis of the NLO corrections, as well as a general discussion of the corrections beyond the Born level, see Ref. [80].
2.5.2 FONLL calculations
The fixed-order plus next-to-leading-logarithms (FONLL) calculations [101] were developed for improving the large-\(p_T\) differential cross section for heavy-quark production in hadron–hadron collisions and then were extended to photoproduction in \(ep\) collisions [102]. This approach is a variant of GM-VFNS, based on the matching of NLO massive and massless calculations according to the prescription [84]:
Here FO denotes the massive NLO cross section, where a heavy quark enters only in the partonic scattering through the flavour-creation processes, but not in the PDFs, and its mass is kept as a non-vanishing parameter. This part, which is singular in the massless limit, and the finite parts related to its different definition in dimensional and mass regularisation are denoted FOM0 and therefore resummed to next-to-leading-logarithm order in the contribution denoted RS. The RS contribution is then added to the FO calculation, while the overlap FOM0 is subtracted to avoid double counting. This is controlled by the matching function \(G(m_Q,p_T)\), which must tend to unity in the massless limit \(p_T \gg m_Q\), where FO approaches FOM0 and the mass logarithms must be resummed. In FONLL its functional form is
with an ad hoc constant \(a = 5\).
A comparison of the NLO and FONLL calculations for beauty production at the Tevatron is shown in Fig. 7, where uncertainty bands obtained from the scale variations are shown. The resummation procedure indicates the presence of a small enhancement in the intermediate-\(p_T\) region, followed by a reduction of the cross section (and of the uncertainty band) at larger \(p_T\) [101]. Both uncertainty bands fully overlap in a wide \(p_T\) range. FONLL predictions for LHC data are given in [103]; they can also be obtained using the public web interface [104].
2.5.3 Other GM-VFNS calculations
Other GM-VFNS calculations [105] were originally performed in the massless limit, valid at high \(p_T\), and therefore include flavour-creation, gluon-splitting and flavour-excitation processes [84]. Subsequently the calculations were improved by identifying the previously omitted finite-mass terms through a comparison with the massive NLO calculation, where together with the mass logarithms, finite terms were also subtracted in such a way that in the limit \(m_Q \rightarrow 0\) the correct massless \(\overline{\mathrm{MS}}\) result was recovered, since the PDFs and perturbative fragmentation functions that are convoluted with the partonic cross sections are defined in the ZM-VFNS.
2.6 Fragmentation of heavy quarks
The production of hadrons in QCD can only be described by taking into account a non-perturbative hadronisation phase, i.e. the processes which transform objects amenable to a perturbative description (quarks and gluons) into real particles (see Fig. 19 in Sect. 5). The contents of this section is partially based on [106], where more details can be found.
In the case of light hadrons, the QCD factorisation theorem [9, 107,108,109,110,111] allows for factorisation of these non-perturbative effects into universal (but factorisation-scheme dependent) fragmentation functions:
In this equation, valid up to higher-twist corrections of order \(\frac{\varLambda _\mathrm{QCD}}{p_T}\), the partonic cross sections \(\frac{\text {d}\sigma _h}{\text {d}p_T}\) for production of the hadron h are calculated in pQCD, while the fragmentation functions, \(D_{i \rightarrow h}(z,\mu )\), are usually extracted from fits to experimental data (not to be confused with the heavy-quark perturbative fragmentation functions, introduced for the GM-VFNS calculations, which initial values at the starting scale are calculable perturbatively [112]). The fragmentation function \(D_{i \rightarrow h}(z,\mu )\) describes the probability that a parton i fragments into a hadron h carrying a fraction z of the momentum of the parton i. Due to their universality they can be used to make predictions for different processes. The factorisation scale \(\mu \) is a reminder of the non-physical character of both the partonic cross sections and the fragmentation functions: it is usually taken of the order of the hard scale of the process (\(p_T\)), and \(D_{i \rightarrow h}(z,\mu )\) are evolved from a low scale up to \(\mu \) by means of the DGLAP evolution equations.Footnote 8
This general picture becomes different for the production of heavy-flavoured hadrons. NLO QCD calculations describe the production of an on-shell heavy quark. Still, mimicking the factorisation theorem given above, the quark-to-hadron transition can be described by convoluting the heavy-quark production cross section with a suitable scale-independent non-perturbative fragmentation function, \(D^\mathrm{np}_{Q \rightarrow H}(z)\), describing the hadronisation of the heavy quark:
It is worth noting that at this stage this formula is not the result of a rigorous theorem but is used on a purely phenomenological basis. Moreover, it will in general fail (or at least be subject to large uncertainties) in the region where the mass \(m_Q\) of the heavy quark is not much smaller than its transverse momentum \(p_T\), since the choice of the scaling variable, z, is no longer unique, and \(O(m_Q/p_T)\) corrections cannot be neglected. This leads to a modelling uncertainty which is, however, small compared to the perturbative uncertainty at NLO.
An important characteristic of the non-perturbative fragmentation function is that the average fraction of momentum lost by the heavy quark when hadronising into a heavy-flavoured hadron, \({\langle z \rangle }^\mathrm{np}\), is given by [113, 114]
Since (by definition) the mass of a heavy quark is much larger than the scale \(\varLambda _\mathrm{QCD}\), this amounts to saying that the non-perturbative fragmentation function for a heavy quark from Eq. (2.23) is very hard, i.e. the quark loses very little momentum when hadronising. This can also be seen by noting that a fast massive quark will lose very little speed (and hence momentum) when picking up a light quark of mass \(\varLambda _\mathrm{QCD}\) from the vacuum to form a heavy meson.Footnote 9
This basic behaviour is to be found as a common feature in all the non-perturbative heavy-quark fragmentation functions, derived from various phenomenological models. Among the most commonly used are the Kartvelishvili–Likhoded–Petrov [118], Bowler [119], Peterson–Schlatter–Schmitt–Zerwas [120] and Collins–Spiller [121] functions. These models all provide some functional form for the \(D^\mathrm{np}_{Q \rightarrow H}(z)\) function and one or more free parameters that control its hardness. Such parameters are usually not predicted by the models (or only very roughly), and must be fitted to experimental data.
There are two important aspects concerning the fragmentation of heavy quarks:
-
1.
A non-perturbative fragmentation function is designed to describe the transition from the heavy quark to the hadron, involving many soft gluons with energies of the order of \(\varLambda _\mathrm{QCD}\). However, if a heavy quark is produced in a high-energy event, it will initially be far off-shell: hard gluons will be emitted to bring it on-shell, reducing the heavy-quark momentum and yielding in the process large collinear logarithms. The amount of gluon radiation is related to the distance between the heavy-quark mass scale and the hard scale of the interaction, and is therefore process dependent. To account for this dependence, different free parameters of the non-perturbative fragmentation function are used at different centre-of-mass energies or transverse momenta (see, e.g. [122]).
-
2.
Since only the final heavy-flavoured hadron is observed, both the non-perturbative fragmentation function and the perturbative cross section for producing heavy quarks must be regarded as non-physical objects. The details of the fitted non-perturbative fragmentation function [e.g. the precise value(s) of its free parameter(s)] depend on those of the perturbative cross sections: different perturbative calculations (LO, NLO, FONLL etc.) and different perturbative parameters (heavy-quark masses, strong coupling etc.) lead to different non-perturbative fragmentation functions. These in turn will have to be used only with a perturbative description similar to the one within which they have been determined [123].
2.7 Concluding remarks
QCD provides robust predictions for heavy-flavour production, owing to the presence of the finite heavy-quark mass which provides a hard scale for perturbative calculations. However, application of perturbative calculations to any process involving hadrons requires a priori knowledge of proton PDFs which are not calculable perturbatively, but must be extracted from data. In addition to describing the transition of heavy quarks into colourless heavy-flavoured hadrons phenomenological fragmentation functions have to be used. Alternative treatments of the heavy-quark mass effects in perturbative calculations lead to several schemes. In the phase space of currently available experimental data the most rigorous calculations are performed in the FFNS, when mass effects of heavy quarks are fully taken into account in all parts of calculations at the price that this potentially may spoil the convergence of the perturbative series at high energy scales.
The dominant heavy-flavour production process at HERA is the boson–gluon-fusion process and at the LHC it is gluon–gluon fusion. Therefore at both colliders the gluon distribution is an essential ingredient to predict the production rate. In other words existing precise heavy-flavour data help to pin down the gluon distribution (see Sect. 8).
Currently exact pQCD calculations exist at NLO for heavy-flavour production both in ep and pp collisions; but only approximate NNLO calculations are available. Since the calculations depend on non-perturbative input (PDFs and fragmentation), it is important to remember that a careful treatment of the latter is crucial for a meaningful comparison of data and theory. Uncertainties in the predictions come from missing higher orders (known as scale uncertainties), QCD parameters (the heavy-quark masses and strong coupling constant), input PDFs and phenomenological fragmentation functions; in the bulk of the available phase space, even at NLO, they are dominated by scale uncertainties (especially in the case of \(pp\) collisions, where these uncertainty are of the order of factor 2 for charm production at the LHC). Therefore progress in theoretical calculations is crucial for performing strong tests of QCD. Nevertheless already with currently available calculations one cannot only test QCD but also use experimental data for significant improvement in the precision of parameters of QCD (mainly the heavy-quark masses) and the gluon content of the proton, and leading to an improved predictive power of the Standard Model.
3 HERA collider, H1 and ZEUS experiments
3.1 HERA collider
HERA played a prominent role in the exploration of the proton structure. It emerged from a series of electron–proton accelerator studies in the 1970s as the highest energy \(ep\) collider possible, which made it possible to produce both NC and CC reactions simultaneously and study electroweak unification. The description below is partially based on [124].
HERA (German: Hadron-Elektron Ring Anlage), at DESY, Hamburg, was the first, and so far the only, accelerator complex in which electrons and protons were collided [125]. It was built in the 1980s with the capability to scatter polarised electrons and positrons off protons, at an energy of the proton beam of initially 820 GeV until it was increased to 920 GeV, in 1998. Together with an electron energy of 27.5 GeV, this resulted in a centre-of-mass energy, \(\sqrt{s}\), of about 320 GeV. The energy was high enough to probe the phase space in x down to \(10^{-6}\) and \(Q^2\) up to 30, 000 GeV\(^2\). The protons were accelerated and stored in a ring of superconducting magnets. The electron ring was normal conducting. A schematic view of the HERA accelerator ring and preaccelerators is shown in Fig. 8.
Two general-purpose detectors with nearly \(4\pi \) acceptance were proposed in 1985, H1 [127] and ZEUS [128]. They were operated over the 16 years of HERA operation. Two further experiments at HERA were built and run in the fixed-target mode. The HERMES experiment [129] (1994–2007) used the polarised electron beam to study spin effects in lepton–nucleon interactions using a polarised nuclear target. The HERA-B experiment [130] (1998–2003) was designed to investigate B-meson physics and nuclear effects in the interactions of the proton-beam halo with a nuclear wire target.
The first HERA data were taken in Summer 1992. HERA had its first phase of operation (referred to as HERA-I) from 1992 through 2000. In this period, the collider experiments H1 and ZEUS each recorded data corresponding to integrated luminosities of approximately \({120}~{\mathrm{pb}^{-1}}\) of \(e^{+}p\) and \({15}~{\mathrm{pb}^{-1}}\) of \(e^{-}p\) collisions. The HERA collider was then upgraded to increase the specific luminosity by a factor of about four, as well as to provide longitudinally polarised lepton beams to the collider experiments [131]. The second data-taking phase (referred to as HERA-II) began in 2003, after completion of the machine and detector upgrades, and ended in 2007. The H1 and ZEUS experiments each recorded approximately \({200}~{\mathrm{pb}^{-1}}\) of \(e^{+}p\) and \({200}~{\mathrm{pb}^{-1}}\) of \(e^{-}p\) data with electron (positron) energy of approximately 27.5 GeV and proton energy of 920 GeV. The lepton beams had an average polarisation of approximately ±30% with roughly equal samples of opposite polarities recorded. In the last three months of HERA operation, data with lowered proton-beam energies of 460 GeV (referred to as LER, Low Energy Run) and 575 GeV (referred to as MER, Middle Energy Run) were taken; each experiment recorded approximately 13 and \({7}~{\mathrm{pb}^{-1}}\) of the LER and MER data, respectively. The primary purpose of the LER and MER data was the measurement of the longitudinal proton structure function \(F_L\).
HERA ceased operations in June 2007 after a long, successful data-taking period of 16 years. A wealth of results have been published. The studies have considerably enlarged the knowledge on the proton structure and provided tests of the Standard Model. There are still ongoing analyses.
3.2 H1 and ZEUS experiments
The collider detectors H1 [127, 132, 133] and ZEUS [128] were designed primarily for deep inelastic scattering (DIS) at large virtuality \(Q^2\) and large final-state energies. Thus, much attention was paid to the electromagnetic and hadron calorimeters. The H1 Collaboration chose liquid argon as active material for their main calorimeter to maximise long-term reliability. The ZEUS Collaboration chose scintillator active media and depleted uranium as the absorber material with the property of equal “\(e\pi \)” response to electrons and hadrons. The calorimeters were complemented by large-area wire chamber systems to measure muon momentum and the tail of hadron-shower energy. Because the electron- and proton-beam energies were very different, the detectors were asymmetric, with extended coverage of the forward (proton-beam) direction. Drift chambers inside the calorimeters, both in H1 and in ZEUS, were segmented into a forward and a central part. Later, in H1 starting in 1996 and in ZEUS from 2003 onwards, silicon detectors near the beampipe were installed for precision vertexing and tracking. Both apparatus were complemented with detector systems positioned near the beam axis in the accelerator tunnel, to measure backward photons and electrons, mainly for the determination of the beam interaction luminosity, and to tag leading protons and neutrons in the forward direction. Both experiments took data over the entire time of HERA’s operation with efficiency of 70–80%. The main components of the H1 and ZEUS detectors are briefly described below with the main emphasis on the components most relevant for studies of heavy-flavour production: the tracking systems for the precise reconstruction of tracks and vertices, which is crucial for the identification of heavy-flavoured hadrons, and the calorimeters, needed for the identification of the scattered electron and for the reconstruction of event kinematical variables.
3.2.1 H1 detector
A schematic view of the H1 detector [127, 132, 133] along the beampipe and the main detector components are shown in Fig. 9. The coordinate system is a right-handed Cartesian system, with the Z axis in the proton-beam direction, referred to as the “forward direction”, and the X axis pointing towards the centre of HERA. The coordinate origin is at the nominal interaction point. The pseudorapidity is defined as \(\eta =-\ln (\tan \frac{\theta }{2})\), where the polar angle, \(\theta \), is measured with respect to the Z axis. The azimuthal angle, \(\phi \), is measured with respect to the X axis.
Charged particles were measured within the Central Tracking Detector (CTD) in the pseudorapidity range \(-1.85< \eta < 1.85\). The CTD consisted of two large cylindrical jet chambers (CJCs), surrounding a system of three silicon detectors consisting of the Central Silicon Tracker (CST) [134], and the forward and backward silicon trackers [135]. The CJCs were separated by a drift chamber which improves the z-coordinate reconstruction. A multi-wire proportional chamber [136], which was mainly used in the trigger, is situated inside the inner CJC. These detectors are arranged concentrically around the interaction region in a magnetic field of 1.16 T. The trajectories of charged particles were measured with a transverse momentum resolution of \(\sigma (p_T)/p_{T} = 0.005 \cdot p_{T}/{}~\mathrm{GeV} \oplus {0.015}{}\) [137].Footnote 10 The interaction vertex was reconstructed from CTD tracks. The CTD also provided triggering information based on track segments measured in the CJCs [138,139,140] and a measurement of the specific ionisation energy loss, \(\mathrm{d}E/\mathrm{d}x\), of charged particles. The Forward Silicon Tracker measured tracks of charged particles at smaller polar angles (\(1.5< \eta < 2.8\)) than the central tracker.
Charged and neutral particles were measured in the liquid argon (LAr) calorimeter, which surrounded the tracking chambers and covers the range \(-1.5< \eta < 3.4\) with full azimuthal acceptance [141]. Electromagnetic shower energies were measured with a precision of \(\sigma (E)/E = 12\%/\sqrt{E}/\)GeV \(\oplus 1\%\) and hadronic energies with \(\sigma (E)/E = 50\%\sqrt{E}/\)GeV \(\oplus 2\%\), as determined in test-beam measurements [142, 143]. A lead-scintillating fibre calorimeter, also referred to as the Spaghetti Calorimeter (SpaCal), [133] covered the backward region \(-4.0< \eta < -1.4\) (the region of high \(Q^2\)) completed the measurement of charged and neutral particles. For electrons the SpaCal had a relative energy resolution of \(\sigma (E)/E = 7\%/\sqrt{E}/\)GeV \(\oplus 1\%\), as determined in test-beam measurements [144]. The SpaCal provided energy and time-of-flight information used for triggering purposes. Because the LAr calorimeter was non-compensating and had on average a larger response to electromagnetic than to hadron energy depositions, a software weighting method had to be applied for the energy reconstruction. The hadronic final state was reconstructed using an energy flow algorithm which combines charged particles measured in the CTD and the forward tracking detector with information from the SpaCal and LAr calorimeters.
The luminosity determination was based on the measurement of the Bethe–Heitler process [145] where the photon was detected in a calorimeter located at \(Z = {-103}~\mathrm{m}\) downstream of the interaction region in the electron beam direction. Additionally, the overall integrated luminosity normalisation was determined using a precision measurement of the QED Compton process [146] with the best achieved relative uncertainty on the measured luminosity was 2.3%.
To reduce the event rate to technically acceptable, \(\approx {10}~\mathrm{Hz}\), a sophisticated multilevel trigger system was used at H1 [147, 148]. The first trigger level was supposed to stop the pipeline. The decision was based on special trigger signals from various detector components. The second trigger level started the readout and used neural networks and topological triggers. The third trigger level was placed into operation in 2005 and was mainly used for heavy-quark decays identification. It used time-optimised routines for the reconstruction of decay resonances and event properties, therefore event building was started on this level. On the fourth trigger level an on-line event reconstruction was performed.
3.2.2 ZEUS detector
A schematic view of the ZEUS detector [128] along the beampipe and the main detector components are shown in Fig. 10. The ZEUS coordinate system is the same as for the H1 detector. The main detector components are briefly described below.
The momenta of charged particles were measured by the Central Tracking Detector (CTD) [149,150,151] in the \({1.43}~\mathrm{T}\) magnetic field of the solenoid [152]. The CTD was a cylindrical drift chamber measuring the direction, momentum and energy loss (\(\mathrm{d}E/\mathrm{d}x\)). It was filled with a gas mixture of argon, carbon dioxide and ethane. The CTD was made of 72 layers of wires, which were grouped in 9 superlayers. The angular coverage of the CTD was \({15}^{\circ }<\theta <{164}^{\circ }\) and the momentum resolution for the full-length tracks in the HERA-I period was determined to be \(\sigma (p_T)/p_T = {0.0058}{} \cdot p_T/{}\mathrm{GeV} \oplus {0.0065}{} \oplus {0.0014}~\mathrm{GeV}/p_T\).
At the time of the HERA luminosity upgrade during the shutdown period 2000–2001, the tracking system of the ZEUS detector was upgraded with the Microvertex Detector (MVD) [153] (Fig. 11). The MVD was a silicon-strip vertex detector, mainly supposed to allow reconstruction of secondary vertices and track impact parameters from heavy-quark decays. The MVD consisted of two sections: barrel (BMVD) with an angular coverage \({30}{^{\circ }}<\theta <{150}{^{\circ }}\) and forward (FMVD), which extended the coverage to \({7}{^{\circ }}\). The momentum resolution of the combined tracking system MVD+CTD for full-length tracks in the HERA-II period was determined to be \(\sigma (p_T)/p_T = {0.0029}{} \cdot p_T/{}\mathrm{GeV} \oplus {0.0081}{} \oplus {0.0012}~\mathrm{GeV}/p_T\), indicating an improved transverse momentum resolution, although the MVD material between the interaction point and the CTD increases the probability for multiple scattering.
The forward region of the ZEUS detector required enhanced tracking and particle identification capabilities due to the asymmetric beam energies. It consisted of the Forward Tracking Detector (FTD) and the Transition Radiation Detector (TRD). The purpose of the FTD was to reconstruct low-angle tracks of ionising particles whereas the TRD separated electrons from hadrons. During the HERA luminosity upgrade programme the TRD was replaced by the Straw Tube Tracker (STT) [154], which improved the tracking efficiency in events with high multiplicities. In the rear direction the Rear Tracking Device (RTD) was located. To determine the position of the scattered electron near the beampipe, the small-angle rear tracking detector (SRTD) [155] was used.
The most important sub-detector that measured energies was the calorimeter (CAL) [156,157,158,159]. The CAL was mechanically subdivided in three parts:
-
the Barrel Calorimeter (BCAL) covering polar angles from \({36.7}{^{\circ }}<\theta <{129.1}{^{\circ }}\);
-
the Forward Calorimeter (FCAL) covering polar angles from \({2.2}{^{\circ }}<\theta <{39.9}{^{\circ }}\);
-
the Rear Calorimeter (RCAL) covering polar angles from \({128.1}{^{\circ }}<\theta <{176.5}{^{\circ }}\).
The CAL was a sampling calorimeter consisting of plates of depleted uranium interleaved with plastic scintillator as active material. The ratio of absorber and scintillator thickness had been chosen to achieve equal signals from hadrons and electromagnetic showers, thereby producing the best possible resolution for hadrons. The CAL provided precise energy measurements for hadrons and jets, an angular resolution for jets better than \({10}~\mathrm{mrad}\), the ability to discriminate between hadrons and electrons using their different energy depositions, and a time resolution of \({1 }\, \mathrm{ns}\). The energy resolution for electrons and hadrons as determined under test-beam conditions was \(18\%/\sqrt{E/{}\mathrm{GeV}}\) and \(35\%/\sqrt{E/{}\mathrm{GeV}}\), respectively.
The Backing Calorimeter (BAC) was built to fulfill two tasks: to achieve a hermetic hadron jet-energy measurement and to aid the tracking of muons passing through the iron yoke of the detector. To measure the energy of hadron-shower leakages out of the CAL and to correct jet-energy measurements, the BAC was equipped with an analog readout, giving precise information on the deposited energy but only approximate information on the deposit position. To enable muon tracking in the iron yoke, a complementary digital readout was designed, giving basically no information about the deposited energy, but exact position in two dimensions. This information was used for better positioning of shower leakages and for discrimination between leaking hadron cascades and muons. To identify muons, the forward muon detector (FMUON) was located in front of the magnet yoke and the barrel and rear muon detectors (BMUON, RMUON) [160] inside and outside the iron yoke. Note that one of techniques used at HERA to measure the production of charmed and beauty hadrons is to identify their decays into muons (see Sect. 4).
The luminosity was measured at ZEUS using the bremsstrahlung reaction \(ep \rightarrow e^{\prime }\gamma p\) by a lead-scintillator calorimeter (PCAL) [161], located at \(Z={-107}\) m, and (after the HERA upgrade) an independent magnetic spectrometer (SPEC) [162], located at \(Z={-104}\) m. The best achieved relative uncertainty on the measured luminosity was 1.8%.
To reduce the event rate from the highest collision rate \(\approx {10}\) MHz to technically acceptable \(\approx {10}\) Hz, a three-level trigger system was used at ZEUS. The first level trigger (FLT) [163, 164] consisted of hardware trigger systems in individual sub-detectors, which sent the information to the global first level trigger (GFLT) to perform the decision. Events that passed the GFLT were processed further by the second level trigger (SLT), based on software triggers, which used information on charged-particle tracks, the interaction vertex, calorimeter timing and global energy sums [165]. Events that passed the SLT were processed by the third level trigger (TLT) [166], which took the decision based on the global information from an event. Finally, events that passed the TLT were written to tape to be fully reconstructed offline.
4 Overview of existing measurements of charm production at HERA
This section describes tagging techniques used to measure openFootnote 11 charm production at HERA and gives an overview of the measurements in deep inelastic scattering (DIS) done by the H1 and ZEUS Collaborations. This overview is restricted to those measurements which are later (see Sect. 6) used for their combination; the measurements are listed in Table 1. A detailed description of event reconstruction and inclusive DIS selection can be found in next Sect. 5, where the ZEUS measurement of \(D^{+}\) production [4] is outlined, whereas the present section merely discusses techniques used to identify charm production.
4.1 Reconstruction of \(D^{*+}\) mesons in the “golden” decay channel
\(D^{*+}\) mesons are reconstructed in the “golden” decay channel \({D^{*+} \rightarrow D^{0} \pi _s^{+}}\) and subsequently \({D^{0} \rightarrow K^{-}\pi ^{+}}\). The \(\pi _s^{+}\) denotes a “slow” pion with a low momentum in the \(D^{*+}\) centre-of-mass frame, since the mass of \(D^{*+}\) is only slightly above the sum of the masses of \(D^{0}\) and \(\pi ^{+}\). This results in a narrow peak for the mass difference \(\varDelta M = M(K^{-}\pi ^{+}\pi _s^{+})- M(K^{-}\pi ^{+})\) near the threshold, accompanied with a not too large combinatorial background and hence the best signal-to-background ratio. The smallness of the mass difference in a charmed hadron decay with emission of a low momentum pion was first observed in a bubble chamber event at BNL [173]. It was proposed for charmed mesons in [174] and widely used in various experiments (e.g. [36, 168, 175,176,177]). The main shortcoming is that in practice \(D^{*+}\) mesons can be measured in the limited kinematic space \(p_T(D^{*+}) \gtrsim {1.25}~\mathrm{GeV}\) only, otherwise the transverse momentum of the slow pion is too small and its track cannot be reconstructed. Another limitation comes from the fact that all decay products have to be reconstructed in the tracking system, thus the production of \(D^{*+}\) mesons can be measured in the central region only, typically \(|\eta (D^{*+})| \lesssim 1.8\). Also, the product of the branching ratios for the decay channels \(D^{*+} \rightarrow D^{0} \pi _s^{+}\) and \(D^{0} \rightarrow K^{-}\pi ^{+}\) is about \(3\%\) only [8]. However still the most precise measurements of open charm production at HERA were obtained using this technique.
Both the H1 and the ZEUS Collaborations have measured the production of \(D^{*+}\) mesons using the “golden” decay channel using the HERA-I and HERA-II data [36, 76, 77, 168, 169, 172] (see Table 1). The best phase-space coverage was achieved in the HERA-II H1 measurement [77]: \(p_T(D^{*+})>{1.25}~\mathrm{GeV}\), \(|\eta (D^{*+})|<1.8\).
Distributions of the reconstructed mass difference \(\varDelta M\) for the most precise H1 and ZEUS HERA-II measurements [77, 172] are shown in Fig. 12. Note that these measurements are performed in slightly different ranges of \(p_T(D^{*+})\) and \(\eta (D^{*+})\), therefore the ZEUS measurement has a better signal-to-background ratio and narrower peak at the cost of two times smaller statistics. Both experiments performed a subtraction of the background using the wrong-sign combinations, obtained by forming “\(D^0\) candidates” by combining two tracks with the same sign.
The measured cross sections of \(D^{*+}\) production as a function of \(Q^2\), y, x, \(p_T(D^{*+})\), \(\eta (D^{*+})\) and \(z(D^{*+})= (E(D^{*+})-p_Z(D^{*+}))/(2E_e y)\), with \(E_e\) being the incoming electron energy, \(E(D^{*+})\) and \(p_Z(D^{*+})\) the energy and longitudinal momentum of \(D^{*+}\), respectively, are shown in Fig. 13 and compared to the NLO predictions, obtained in the ZM-VFNS and FFNS (see Sects. 2.2 and 2.4). The dominant experimental uncertainty is the systematic uncertainty on the tracking efficiency (\(\approx 4\%\)); in most of the bins the statistical uncertainty is smaller than the total systematical one. The FFNS predictions describe the data reasonably well within uncertainties, with a possible exception for the shape of the \(z(D^{*+})\) distribution. The ZM-VFNS predictions describe the data significantly less well; in particular, they fail to describe the shape of \(p_T(D^{*+})\), y and x distributions.
4.2 Reconstruction of weakly decaying D mesons
The exploitation of the long lifetime of weakly decaying charmed hadrons allows their identification. All final decay products must be charged particles reconstructed in the tracking system. Examples of such decay channels are \(D^{+} \rightarrow K^{-}\pi ^{+}\pi ^{+}\) and \(D^{0} \rightarrow K^{-}\pi ^{+}\). Large combinatorial background can be significantly suppressed by applying a cut on lifetime information (e.g. track impact parameters or decay-length significance), although since the background rises steeply towards lower values of \(p_T(D)\), a lower cut on \(p_T(D)\) has to be applied; a cut on transverse momentum also improves the efficiency of the lifetime information. It should be noted that there are limitations of this technique, which are similar to those of the previous one: a measurement can be performed only in a fiducial transverse-momentum and pseudorapidity phase-space region and the branching ratios are small.
ZEUS measured the production of \(D^{0}\) [170] and \(D^{+}\) [4] mesons using the weak decays \(D^{0} \rightarrow K^{-}\pi ^{+}\) and \(D^{+} \rightarrow K^{-}\pi ^{+}\pi ^{+}\), respectively. The measurement of \(D^0\) production was based on the \({134}~\mathrm{pb^{-1}}\) of data from 2005 only, while the measurement of \(D^{+}\) production used the full HERA-II data of \({354}~\mathrm{pb^{-1}}\).Footnote 12 Both measurements were performed in the phase-space region \(p_T(D^{+},D^0)>{1.5}~\mathrm{GeV}\), \(|\eta (D^{+},D^0)|<1.6\), \(5<Q^2<{1000}~{\mathrm{GeV}^2}\), \(0.02<y<0.7\). Lifetime information was used to reduce combinatorial background substantially, applying a cut on the decay-length significance of the secondary vertex. This technique benefits from the MVD tracking and vertexing, which is not feasible using the HERA-I data. The measurement of \(D^{+}\) production is one of the important results further described in detail in Sect. 5, where also an example of an event with a selected \(D^{+}\) candidate can be seen in Fig. 22.
4.3 Usage of semi-leptonic decays
Charmed particles with semi-leptonic decays can be identified using discriminating variables, e.g. the missing transverse momentum caused by a neutrino or the impact parameter of the lepton track. The measurements benefit from large branching ratios and a better pseudorapidity coverage at the cost of a worse signal-to-background ratio.
ZEUS measured charm and beauty production exploiting their decays into muons [171]. The measurement was based on the \({134}~{\mathrm{pb}^{-1}}\) of data from 2005. The measured observables were cross sections of muons originating from charm and beauty decays. The fractions of muons originating from charm, beauty and light flavours were extracted by using three discriminating variables: the muon impact parameter, the muon momentum component transverse to the associated jet axis, and the missing transverse momentum, which is sensitive to the neutrino from semi-leptonic decays. The kinematic region of the measurement was \(p_T(\mu )>{1.5}~\mathrm{GeV}\), \(-1.6<\eta (\mu )<2.3\), \(Q^2>{20}~{\mathrm{GeV}^2}\) and \(0.01<y<0.7\) (note the extended coverage of the forward region compared to D measurements).
Distributions of the discriminating variables are shown in Fig. 14. Contributions from charm and beauty production are separated from light flavours and from each other by using a global template fit to the Monte Carlo (MC) expectation. The measured muon differential cross sections as a function of \(p_T(\mu )\), \(\eta (\mu )\), \(Q^2\) and x are shown in Fig. 15 and compared to the NLO predictions, obtained in the FFNS, and RAPGAP MC, normalised according to the result of the global fit. The NLO FFNS predictions describe the data well. The RAPGAP MC gives a good description of the shape of all the differential cross sections. Since MC was normalised according to the result of the fit, this can be considered as a verification of the validity of the fit results.
4.4 Fully inclusive analyses based on lifetime information
Events with charmed particles are identified by reconstruction of displaced secondary vertices based on the lifetime information. The measurement results benefit from the larger phase-space coverage and largest statistics, since they are not limited by any particular branching ratio, although the signal-to-background ratio is usually worst.
H1 measured inclusive charm and beauty cross sections using variables reconstructed by the vertex detector, including the impact parameter of tracks to the primary vertex and the position of the secondary vertex [167]. The measurement was based on the \({189}~\mathrm{pb^{-1}}\) of data from 2006–2007. The phase space of the measurement was \(5<Q^2<{2000}~{\mathrm{GeV}^2}\) and \(0.0002<x<0.05\). Similar to the technique used for measurements with semi-leptonic decays, described in Sect. 4.3, this measurement was based on the discrimination of charm and beauty contributions, performed with a neural network, using long-lifetime discriminating variables. Figure 16 shows the distributions of the discriminating variables, used as input for the neural network. The measured quantities were the charm and beauty reduced cross sections as a function of \(Q^2\) and x in the full \(p_T\) and \(\eta \) range. The measurement [167] was then combined with previous H1 measurements [178, 179] based on HERA-I data.
ZEUS measured the production of charm and beauty with at least one jet using the invariant mass of the charged tracks associated with secondary vertices and the decay-length significance of these vertices [30]. The measurement was based on the full HERA-II data of \({354}~{\mathrm{pb}^{-1}}\). The kinematic phase space of the charm measurement was \(E_T^\mathrm{jet}>{4.2}~\mathrm{GeV}\), \(-1.6<\eta ^\mathrm{jet}<2.2\), \(5<Q^2<{1000}~{\mathrm{GeV}^2}\) and \(0.02<y<0.7\), where \(E_T^\mathrm{jet}\) is the transverse energy of the jet. Contributions from charm and beauty production were separated from light flavours and from each other by using a global template fit to the MC expectation. Figure 17 shows the distributions of the decay-length significance for different bins of the secondary-vertex mass, \(m_\mathrm{vtx}\). All MC samples were normalised according to the scaling factors obtained from the fit. A good agreement between data and MC is observed. The first two mass bins corresponding to the region \(1< m_\mathrm{vtx} < {2}~\mathrm{GeV}\) are dominated by charm events. In the third mass bin, \(2< m_\mathrm{vtx} < {6}~\mathrm{GeV}\), beauty events are dominant at high values of the decay-length significance. The measured differential cross sections for inclusive jet production in charm events as a function of \(E_T^\mathrm{jet}\), \(\eta ^\mathrm{jet}\), \(Q^2\) and x are shown in Fig. 18 and compared to the NLO predictions obtained in the FFNS with different proton PDFs and to the predictions from the RAPGAP MC, scaled to the ratio of the measured visible cross section to the RAPGAP prediction. All measured cross sections are better described by the NLO FFNS, while RAPGAP provides a worse description of the shape of the charm cross sections than the NLO FFNS calculations. The data are typically 20–30% above the NLO predictions, but in agreement within uncertainties. The differences between the NLO predictions using different proton PDFs are mostly very small.
4.5 Concluding remarks
Different tagging techniques have been used to measure open charm production in DIS at HERA. The most precise results were obtained in measurements of \(D^{*+}\) production using the “golden” decay channel. In all cases (except for the H1 vertex measurement [167]) the measured quantities were visible cross sections in a limited \(p_T\) (\(E_T^\mathrm{jet}\)) and \(\eta \) phase-space region. The largest phase-space coverage was obtained in fully inclusive analyses based on lifetime information. Techniques based on the usage of semi-leptonic decays and fully inclusive analyses are often used for a simultaneous measurement of charm and beauty production, while in measurements using the full reconstruction of D mesons usually the sum of heavy-flavoured hadron production of charm and beauty processes are measured (dominated by charm). Techniques that rely on the usage of lifetime information require precise tracking and vertexing, thus can be fully exploited only with the data taken with the silicon detectors near the beampipe.
Results of precise charm measurements, which provide a double-differential cross section, are used to extract the inclusive cross section, i.e. the charm structure function \(F_2^{c\bar{c}}\) or the reduced cross section \(\sigma _\mathrm{red}^{c\bar{c}} \). The extraction is based on the extrapolation procedure, which used the shape of theoretical predictions, thus measurements with larger transverse-momentum and pseudorapidity phase-space coverage are preferable (more details as regards the extrapolation procedure are provided in Sect. 6.2.3 in the context of charm data combination).
All measured cross sections were compared to the theoretical predictions obtained in different schemes. The NLO FFNS predictions provide a good description of the data within uncertainties in all cases, while the NLO ZM-VFNS predictions do not describe the shape of some kinematic variables well. A direct comparison of measured visible cross sections to the GM-VFNS predictions is not possible, since the GM-VFNS calculations were done only for inclusive cross sections. Comparisons to MC predictions did not aim to check theory, since in these cases MC simulations were LO and parton showers, renormalised to the data (more details as regards the technique of MC simulations are provided in Sect. 5.3). These comparisons mainly aimed at justifying the validity of the template fit procedure or the acceptance corrections, which exploited MC.
In general, measurements performed using different methods are complementary to each other and thus can be combined to achieve the best precision. This is presented in Sect. 6.5. Such combination requires an extrapolation of the visible cross sections to the full phase space using the shape of some theoretical calculations. Since the FFNS predictions are consistent with the data in all kinematic regions (including high \(Q^2\)), the NLO FFNS is considered to be the best and presently the only practically available theoretical calculation for this extrapolation.
5 Measurement of \(D^{+}\) production
Among the charm-tagging techniques, described in Sect. 4, measurements of \(D^{+}\)-meson production are based on the full reconstruction of final-state charmed hadrons and crucially depend on the precise tracking and vertexing near the beampipe. This section describes the measurement of \(D^{+}\)-meson production with the ZEUS detector, using the full HERA-II dataset. Combinatorial background can be significantly suppressed by applying a cut on lifetime information. The earlier ZEUS measurement of \(D^{+}\) production [170] was performed using \({134}~{\mathrm{pb}^{-1}}\) of data from 2005. It has demonstrated the high potential of this tagging method, although was not really competitive in precision to other ZEUS charm measurements, e.g. [169]. The present measurement is based on about 2.5 times larger data sample and improved tracking alignment. The results were published by the ZEUS Collaboration [4]. The H1 measurement of \(D^{+}\)-meson production [180] is based on the HERA-I data.
Section 5.1 explains general aspects of the event reconstruction in ZEUS, relevant for the present analysis; it is partially based on [181]. Section 5.2 describes the selection of DIS events. Section 5.3 introduces the technique of MC simulations and provides information on MC samples, used in the analysis. Section 5.4 describes the reconstruction and selection of \(D^{+}\) candidates, while Sect. 5.5 explains the procedure of attributing these candidates to \(D^{+}\) and background. Section 5.6 describes the cross-section determination procedure and corrections applied. Details of the theoretical calculations are given in Sect. 5.7. Finally, results are reported and summarised in Sect. 5.8.
5.1 Event reconstruction
Each single \(ep\) collision is referred to as an event. Events selected by the third level trigger (TLT) were written to tape as raw data in the form of signals from all sub-detectors (see Sect. 3.2.2 for the description of the ZEUS detector). These data were used offline to reconstruct general characteristics of events which correspond to signatures of physical objects (particles, jets etc.). Subsequently, the reconstruction of tracks (Sect. 5.1.1), vertices (Sect. 5.1.2), hadronic final-state system (Sect. 5.1.3) and DIS kinematic variables (Sect. 5.1.4) is briefly described.
5.1.1 Tracking
A charged particle is identified through the trajectory it leaves in the detector. This trajectory is referred to as a track. It depends not only on the inhomogeneous magnetic field, but also on energy loss and multiple scattering in the material; thus the reconstruction of tracks is a complicated task. The approach adopted in ZEUS made use of the Kalman filter [182] and ensured a rigorous treatment of all factors which affect particle trajectories. For the most precise reconstruction of tracks the information from the CTD and MVD was used.
The Kalman filter algorithm [182] is an iterative procedure for the reconstruction of tracks from the measured hits. It reconstructs tracks from the outermost point of the tracking system to the origin. Unlike other global methods which fit all the measurements to a single set of track parameters, the Kalman filter causes the track to “follow the measurements” through the detector [183]. A detailed description of the procedure can be found in [182] and an extended review of its properties and advantages can be found in [183].
Tracks were reconstructed in two stages:
-
pattern recognition. The first stage was performed in multiple steps by the VCTRACK package. It started from the outermost tracking detector layer, which was the ninth CTD superlayer for the central region, where the track density was lower than close to the interaction point. Combinations of three CTD hits from axial CTD superlayers formed the tracking seeds. A track seed was extrapolated inward, gathering additional hits with increasing precision as the trajectory parameters were updated. A very broad “fictitious” hit was added at the beam line to guide the trajectory. After a “road” of hits from the CTD through the MVD to the interaction point has been created, a least-squares fit of the track was performed using the selected hits on the road in order to determine the helix parameters at the beginning of the helix. In general the tracking reconstruction was not restricted to tracks with hits in all tracking devices; the so-called CTD-only and MVD-only tracks have hits in only one sub-detector;
-
trajectory refinement. A track fit was performed with the Kalman filter to improve the precision of the helix parameters in the vicinity of the interaction point. As input it took the fit output from the pattern recognition stage. The track fit was applied recursively in three steps: prediction, filtering and smoothing. At the prediction step, the present state i hits (i.e. hits that have already been used for the trajectory estimation) was used to predict the position of the next \((i+1)\mathrm{th}\) hit on the next detector sensor (which could be a CTD wire or an MVD sensor). At the following filtering step the predicted and the measured values for the \((i+1)\mathrm{th}\) hit positions were combined. At the last step a smoothing of the whole trajectory was performed and the covariance matrix was updated.
5.1.2 Vertexing
A vertex is the position where an interaction or decay happened. The evaluation of vertices serves two purposes [184]. The first is to evaluate the position of the primary \(ep\) interaction point and to calculate the appropriate track momenta at that point with improved precision due to the vertex constraint. The second purpose of using vertices is to estimate the probability that the tracks originate from a certain vertex. This probability might be estimated from the vertex fit quality (e.g. the \(\chi ^{2}\) of the vertex fit) and used for the event selection. The essential information that is used in the fit consists of track parameters and their covariance matrices.
Proper identification of both the primary point of interaction and the \(D^{+}\) decay vertex in an event was of particular importance for this analysis. Their position was reconstructed first with the VCTRACK package and further refinement was applied later [181].
The vertex pattern recognition started with a loose constraint that the primary vertex must be found along the proton-beam line. Track pairs, which were compatible with this soft constraint as well as with a common vertex, were combined with other track pairs. The final choice of the primary-vertex position after the pattern recognition stage was the vertex with the best overall \(\chi ^{2}\). To improve the precision of the vertex-position measurement, the Deterministic Annealing Filter (DAF) [185] was used. The main feature of the DAF algorithm is that tracks with the best quality get the largest weight in the fit, while tracks that are far from the vertex get the smallest weight in the fit [184]. In the chosen approach the vertex position was measured iteratively by calculating a weighted sum of the \(\chi ^{2}\) contributions from individual tracks to the vertex [181].
For the primary-vertex fit, an important further improvement in precision was possible by the introduction of a constraint on the vertex position to be close to the averaged interaction point, the beamspot. The beamspot was defined as the overlap region of the colliding beams. It had a width of roughly \(80 \times {20}~\upmu \)m in the XY plane, but it was too large in the Z direction to use this information as a constraint [181].
In the case of secondary vertices, e.g. the \(D^{+}\)-decay vertex, the fit was made with the same algorithm skipping the step of the pattern recognition, since the combination of tracks was chosen based on its compatibility with the \(D^{+}\) mass. For each secondary vertex, the corresponding reduced primary vertex was recalculated removing the secondary-vertex tracks and repeating the standard primary-vertex fit [181].
5.1.3 Hadronic final states
To get the most precise hadron energy measurement, information from the calorimeter and the tracking detectors was combined into the so-called ZEUS Unidentified Flying Objects (ZUFOs) [186].Footnote 13 Ideally each ZUFO was supposed to represent one final-state particle. The energy resolution of the CAL developed for higher particle energies as \(\sigma (E)/E \sim 1/E\), while the tracking momentum resolution, parametrised by \(\sigma (p_T)/p_T = a p_T \oplus b \oplus c/p_T\), gave a better energy estimate for lower particle momenta (see Sect. 3.2.2). For neutral particles, only CAL information could be used, whereas for charged particles the tracking information was mainly used below \({10}~\mathrm{GeV}\) while calorimeter energy was used for higher energies.
ZUFOs were constructed in the following steps:
-
CAL cells were clustered into two-dimensional cell islands;
-
the cell islands from the previous stage were used as input to clustering in (\(\theta \), \(\phi \)) space to form three-dimensional energy clusters called cone islands;
-
tracks that have been fitted to a vertex and passed certain requirements, were extrapolated to the surface of the CAL taking into account the magnetic field; as a result of this procedure, groups of cone islands and tracks—ZUFOs—were formed;
-
the combination of the information from the CAL and the tracking system was carried out in the following way:
-
if one track has been matched to one cone island, the ZUFO energy was taken either from the CAL cluster or from the matched track momentum, depending on which measurement had better resolution;
-
for tracks that have not been associated to islands, the energy was derived from the momentum measurement with the assumption that the particle was a charged pion;
-
cone islands that have not been matched to any track were treated as neutral particles and the CAL energy was used;
-
cone islands with more than three associated tracks were treated as jets and the energy was taken from the CAL;
-
if a track has been matched to multiple islands or two tracks have been matched to one or two islands, the algorithm was similar to the one-to-one matching, but using the sum of energies or momenta instead.
Additional corrections were applied to account for the material of the detector, the inefficiency in the regions of cracks between the CAL sections, the presence of muonsFootnote 14 and the imbalance in the compensation effect for low momentum (\(\sim \)1 GeV) hadrons. In this analysis the reconstructed ZUFOs have been used to determine the kinematics of the hadronic system as well as DIS kinematic variables (see Sect. 5.1.4).
5.1.4 Scattered-electron identification and reconstruction of kinematic variables
The identification of the scattered electron is essential for the NC DIS event selection. The scattered electron leaves a signature in the detector which differentiates the NC DIS events from the CC DIS, where the neutrino escapes undetected, and photoproduction (PHP), where the scattered electron escapes through the beam hole. There have been two main electron finders developed in ZEUS: the neural-network-based SINISTRA95 (also referred to just as SINISTRA) [187] and the probabilistic EM [188]. The former was tuned for the kinematic region of the \(D^{+}\) measurement, whereas the latter was better for the high-\(Q^2\) region, where the electron was reconstructed in the BCAL.
A scattered electron passing through the CAL created an electromagnetic shower, therefore most of its energy was measured in the EMC with a small leakage in the HAC. SINISTRA started from the search of the cells with maximum energy deposits to form candidate clusters. These clusters were formed using the next-to-nearest neighbour algorithm on CAL towers to produce islands and then merging the islands from different CAL sections. This information was passed to the neural network, which had been trained using MC simulated hadronic and electromagnetic clusters in the RCAL. As an output SINISTRA returned a number between 0 and 1, which represents the probability of the cluster to be the scattered electron. In the following only the candidate with the highest probability was considered. The identified electron was assigned the energy of the reconstructed CAL cluster.
After the reconstruction of the scattered electron and the hadronic system in an event, the kinematic variables \(Q^2\), x and y, introduced in Sect. 2.4.1, can be calculated. There were several methods:
-
the electron method used only the electron energy and scattering angle. The kinematic variables were calculated as follows:
$$\begin{aligned}&Q^2_\mathrm{el}=2E_eE_e^{\prime }(1+\cos \theta _e),\nonumber \\&y_\mathrm{el}=1-\frac{E_e^{\prime }}{2E_e}(1-\cos \theta _e),\nonumber \\&x_\mathrm{el}=\frac{Q^2_\mathrm{el}}{sy_\mathrm{el}}, \end{aligned}$$(5.1)where \(E_e\) is the incoming electron energy (which is known a priori), \(E_e^{\prime }\) and \(\theta _e\) are the scattered-electron energy and angle, respectively, and s is the centre-of-mass energy squared. This method relies strongly on the measurement of the electron energy and position. Because of the characteristics of the ZEUS detector it is more precise in the rear region, therefore it is optimal at low \(Q^2\). In addition this method is strongly affected by initial- and final-state photon radiation, which spoils the measurement of the lepton energy and leads to deterioration of the results.
-
The Jacquet–Blondel method (JB) relied exclusively on the reconstruction of the hadronic final state [189]. The kinematic variables were calculated as follows:
$$\begin{aligned}&y_\mathrm{JB}=\frac{\delta _\mathrm{had}}{2E_e},\nonumber \\&Q^2_\mathrm{JB}=\frac{P^2_{T~\mathrm{had}}}{1-y_\mathrm{JB}},\nonumber \\&x_\mathrm{JB}=\frac{Q^2_\mathrm{JB}}{sy_\mathrm{JB}}, \end{aligned}$$(5.2)where \(P_{T~\mathrm{had}}\) and \(\delta _\mathrm{had}\) are given by
$$\begin{aligned}&P_{T~\mathrm{had}}=\sqrt{\sum _i (P^i_{x~\mathrm{had}})^2+(P^i_{y~\mathrm{had}})^2},\nonumber \\&\delta _\mathrm{had}=\sum _i (E^i_\mathrm{had}-P_{z~\mathrm{had}}^i), \end{aligned}$$(5.3)where (\(E^i_\mathrm{had}\), \(P^i_{x~\mathrm{had}}\), \(P^i_{y~\mathrm{had}}\), \(P^i_{z~\mathrm{had}}\)) is the four-momentum of each hadron final state and the sum goes over all hadronic energy, excluding the scattered electron, if any. The advantage of this method is that it does not require the scattered electron to be detected and thus can be used in PHP or CC events, although it has poor \(Q^2\) resolution in DIS events.
-
The double-angle method (DA) combined information from the scattered electron and the hadronic system [190, 191]. The kinematic variables were calculated as follows:
$$\begin{aligned}&Q^2_\mathrm{DA}=4E_e^2\frac{\cot (\theta _e/2)}{\tan (\theta _e/2)+\tan (\theta _\mathrm{had}/2)},\nonumber \\&y_\mathrm{DA}=\frac{\tan (\theta _\mathrm{had}/2)}{\tan (\theta _e/2)+\tan (\theta _\mathrm{had}/2)},\nonumber \\&x_\mathrm{DA}=\frac{Q^2_\mathrm{DA}}{sy_\mathrm{DA}}, \end{aligned}$$(5.4)where \(\theta _\mathrm{had}\) is the hadronic angle, defined as
$$\begin{aligned}&\mathrm{tan} (\theta _\mathrm{had}/2)=\frac{\delta _\mathrm{had}}{P_{T~\mathrm{had}}}. \end{aligned}$$(5.5)This method exploits the fact that the angular resolution for the hadronic system is usually better than the angular resolution for the scattered electron, while for energy it is vice versa. Thus the DA method leads to a more precise measurement of the kinematic variables in a large part of the phase space and was chosen as the main one for the present analysis [181].
5.2 DIS event selection
The analysis used the full HERA-II data with an integrated luminosity \({354}~{\mathrm{pb}^{-1}}\). Both electron–proton and positron–proton events were used, because the charm NC DIS cross sections at not too high \(Q^2\) are invariant with respect to the lepton charge. The DIS kinematic region of the measurement was restricted to \(5<Q^2<{1000}~{\mathrm{GeV}^2}\) and \(0.02<y<0.7\), where reliable reconstruction of the scattered electron was possible with the ZEUS detector after the HERA-II high-luminosity upgrade [131].
The selected events had to be triggered online by one of the inclusive DIS third level trigger slots (see [181] for the description of these slots):
-
SPP02 for the 2004–2005 data period, or
-
SPP09, or HFL17, or HPP31 for the 2006–2007 data period.
Furthermore to ensure selection of good DIS events, the following cuts were applied offline:
-
\(5<Q^2_\mathrm{DA}<{1000}~{\mathrm{GeV}^2}\), \(0.02<y_\mathrm{DA}<0.7\). These criteria selected the considered DIS phase-space region.
-
\(E_e^{\prime }>{10}~\mathrm{GeV}\). The requirement ensured high efficiency of SINISTRA and rejected possible background PHP events with “fake” scattered electrons.
-
\(E^\mathrm{cone}_{\mathrm{non}~e}<{5}~\mathrm{GeV}\), where \(E^\mathrm{cone}_{\mathrm{non}~e}\) is the energy deposit in the CAL in the cone centered around the scattered electron with a radius of 0.8 in the (\(\eta \), \(\phi \)) plane, not originating from it. This cut is known as the electron isolation and was supposed to improve further the quality of the scattered-electron reconstruction.
-
\(\mathrm{prob}_\mathrm{SINISTRA}>0.9\), where \(\mathrm{prob}_\mathrm{SINISTRA}\) is the output of the SINISTRA neural network.Footnote 15 This selection further ensured high efficiency in SINISTRA.
-
\(y_\mathrm{JB}>0.02\). This requirement rejected events with the poorly reconstructed hadronic system, for which the DA method was not precise.
-
\(40<\delta _\mathrm{had}<{65}~\mathrm{GeV}\). The lower cut reduced the PHP contamination (when the scattered electron was not detected) and the upper cut rejected events initiated by cosmic-ray particles.Footnote 16
-
\(-30<Z_\mathrm{vtx}<{30}~\mathrm{cm}\), where \(Z_\mathrm{vtx}\) is the Z coordinate of the primary vertex. This requirement rejected events initiated by beam-gas and satellite-bunch interactions.
-
A set of cuts on the geometric position of the scattered electron in the CAL (\(x_{e^{\prime }}\), \(y_{e^{\prime }}\), \(z_{e^{\prime }}\)), to remove events in which the scattered electron passed through the regions of the CAL poorly simulated in Monte Carlo; note that these cuts are quoted as exclusion cuts, i.e. the events were removed if they satisfied any of the criteria:
-
\(|x_{e^{\prime }}|<{13}~\mathrm{cm}\) and \(|y_{e^{\prime }}|<{13}~\mathrm{cm}\). This requirement is known as the box cut and removed the edges of the CAL.
-
\(\sqrt{x_{e^{\prime }}^2+y_{e^{\prime }}^2}>{175}\) cm. This cut rejected the region between the RCAL and BCAL.
-
\(-104<z_{e^{\prime }}<{-98.5}\) cm or \(164<z_{e^{\prime }}<{174}\) cm. This requirement is known as the super-crack cut and removed the regions of cracks between the RCAL, BCAL and FCAL.
-
\(6.5<x_{e^{\prime }}<{12}\) cm and \(y_{e^{\prime }}>0\), or \(-14<x_{e^{\prime }}<{-8.5}\) cm and \(y_{e^{\prime }}<0\). This requirement is known as the module-gap cut and removed the region of gaps between halves of the RCAL.
-
\(|x_{e^{\prime }}|<{12}\) cm and \(y_{e^{\prime }}>{80}\) cm. This requirement is known as the chimney cut and removed the region of the RCAL where cooling tubes and supply cables for the solenoid were mounted.
-
In addition, for a subset of the data with the run ranges 59,600–60,780, 61,350–61,580, 61,800–6,3000 the region \(11<x_{e^{\prime }}<{27}\) cm and \(10.5<y_{e^{\prime }}<{27}\) cm was removed, which was not described by the Monte Carlo simulations.
5.3 Monte Carlo simulations
The complexity of the HERA experiments makes it necessary to apply Monte Carlo (MC) methods for their evaluation. The two tasks are:
-
the description of all relevant physics processes with their complete final state using available MC generators, and
-
the simulation of the detector response, i.e. the account of the effects as the final state particles pass through the various detector components.
5.3.1 Simulation of physics processes
In the generation of MC events the QCD factorisation theorem [9, 107,108,109,110,111] is exploited to separate short- and long-distance effects. Figure 19 illustrates the case for different phases in the boson-gluon fusion process (see also Fig. 4 for the corresponding diagram):
-
The hard scattering process is usually calculated at LO.
-
Radiation corrections (referred to also as parton showers) are modelled using some phenomenological models. The difference between the fixed-order NLO calculation and LO accompanied by parton showers is that the latter is better reproducing the whole final state (the event shape), which is important for the correct simulation of the detector response, while the former gives a better description of inclusive quantities.Footnote 17
-
Hadronisation is the non-perturbative QCD process of the formation of colourless hadrons from coloured partons. It is performed by using some phenomenological models.
-
Decays of unstable particles are simulated accordingly to available decay tables.Footnote 18
Examples of event generators commonly used in ZEUS are PYTHIA [192], ARIADNE [193], RAPGAP [194] etc.
5.3.2 Simulation of detector response
After the simulation of underlying physics processes, final-state particles are passed through a simulated detector. Simulation of the ZEUS detector was performed in the MOZART program, which is based on GEANT 3.21 [196]. Furthermore, generated events were passed through the simulated ZEUS trigger system and the reconstruction program ZEPHYR. More details as regards the ZEUS MC production system can be found in [181]. Finally, MC events were written to tape as regular data and processed by the same reconstruction and selection algorithms, although they contain additional information on generated particles, referred to as generated, or true information. However, the procedure of matching between generated particles and reconstructed ones has some complications (see Sect. 5.6.3).
5.3.3 MC samples
In the present analysis the following MC samples have been used:
-
The RAPGAP charm DIS MC sample, \(ep \rightarrow e' c\bar{c}X\), was the main sample used to determine acceptance corrections. MC events were simulated with the RAPGAP 3.00 [194] program, interfaced with HERACLES 4.6.1 [197] to incorporate first-order electroweak corrections. The CTEQ5L [198] PDFs were used for the proton.
-
The RAPGAP beauty DIS MC sample, \(ep \rightarrow e' b\bar{b}X\), similar to the previous one, was used to estimate the contribution to \(D^{+}\) production from decays of beauty hadrons.
-
The RAPGAP charm DIS MC sample without QED radiation, \(ep \rightarrow e' c\bar{c}X\), was used to correct the measured cross sections to the QED Born level.
-
The ARIADNE inclusive MC sample, \(ep \rightarrow e' X\), was used for simulation of combinatorial background and optimisation of selection cuts.
-
The PYTHIA PHP charm MC sample, \(ep \rightarrow e' c\bar{c}X\), was used to estimate the contribution from PHP events.
5.4 Reconstruction and selection of \(D^{+}\) candidates
The \(D^{+}\) mesons were reconstructed in the decay channel \(D^{+} \rightarrow K^{-}\pi ^{+}\pi ^{+}\). The full final-state particle reconstruction consists in making combinations of all tracks with proper charges, if possible followed by the reconstruction of the secondary vertex (the place where the decay happened) and re-fitting of the considered tracks to this vertex, thus improving their reconstruction. The invariant mass, \(M(K\pi \pi )\), is calculated using the energy and momentum conservation rules, and the masses of the daughter particles. If the reconstructed invariant mass is found to be close to the mass of the hadron under consideration, the combination is considered as a candidate. The tracks from the selected combinations are referred to as daughter tracks.
Inherently such a method leads to a large combinatorial background, which is due to combinations of tracks not originating from the analysed hadron decay channel or from wrongly combined daughter tracks. In order to suppress this background, additional cuts on the parameters of the daughter tracks and the quality of the secondary-vertex reconstruction have been applied.
The measurement was performed in the \(D^{+}\) phase-space region \(1.5<p_T(D^{+})<{15}\) GeV, \(|\eta (D^{+})|<1.6\). At lower values of \(p_T(D^{+})\) the combinatorial background increases drastically, making the measurement impossible, while at higher values of \(p_T(D^{+})\) the production cross section becomes too small to be measured with the available integrated luminosity. The \(\eta (D^{+})\) range is determined by the coverage of the tracking system, since all daughter tracks have to be detected and well reconstructed.
5.4.1 Selection of secondary vertices
The large lifetime of \(D^{+}\) mesons, \(c\tau (D^{+})=311.8\pm {2.1}~\upmu \)m [199], makes it possible to reconstruct their secondary vertices with the microvertex detector (MVD). Important characteristics of the reconstructed secondary vertices (Fig. 20) include:
-
\(\chi ^{2}\) of the secondary-vertex fit, \(\chi ^{2} _\mathrm{sec~vtx}\);
-
the decay length, defined as the distance between the primary and secondary vertices;
-
the uncertainty on the decay length;
-
the collinearity of the directions from the primary to the secondary vertex and the \(D^{+}\) momentum.
The most efficient way of using the lifetime information is to combine the last three quantities into the projected decay-length significance (for simplicity referred to as just the decay-length significance), \(S_l\), defined as the ratio of the decay length, projected on the XY plane and on the \(D^{+}\) momentum, to the uncertainty on this quantity:
where \(l_{\text {XY}}\) is the projected decay length, defined as
and \(\sigma _{l_{{XY}}}\) is the uncertainty on \(l_{{XY}}\). Here \(\varvec{P}_{{XY}}\) and \(\varvec{S}_{{XY}}\) are the vectors pointing to the primary and secondary vertices, respectively, and the \(\cdot \) sign denotes a scalar product. The projection on the XY plane was used because the resolution of the vertex position was most precise in the transverse plane.
The optimal cuts on \(S_l\) and \(\chi ^{2} _\mathrm{sec~vtx}\) were determined by maximising the statistical significance of the mass peak, \(S_P\), defined as the ratio of the signalFootnote 19 to its statistical uncertainty, assuming a Poisson distribution:
where S is the number of candidates in the signal peak and Bg is the number of candidates in the background, where the region of the signal peak is defined within three standard deviations. The study was performed on the inclusive ARIADNE MC sample. The dependence of \(S_P\) on a lower cut on \(S_l\) and an upper cut on \(\chi ^{2} _\mathrm{sec~vtx}\) is shown in Fig. 21. The optimal cuts are:
-
\(S_l>4\),
-
\(\chi ^{2} _\mathrm{sec~vtx}<10\).
5.4.2 Selection of \(D^{+}\) candidates
To ensure the selection of well-reconstructed \(D^{+}\) candidates and to improve the signal-to-background ratio, the following cuts were applied:
-
\(1.5<p_T(D^{+})<{15}~\mathrm{GeV}\), \(|\eta (D^{+})|<1.6\), to select the \(D^{+}\) phase-space region;
-
\(S_l>4\), \(\chi ^{2} _\mathrm{sec~vtx}<10\), to reduce the combinatorial background, as explained in Sect. 5.4.1;
-
\(l_{\text {XY}}<{1.5}\) cm, to ensure that selected secondary vertices were inside the beampipe, thus did not originate from interactions with the beampipe or detector material;
-
\(p_T(K)>{0.5}\) GeV, \(p_T(\pi )>{0.35}\) GeV, to further reduce combinatorial background while still keeping the detector acceptance at a reasonable level at low \(p_T(D^{+})\);
-
\(|\eta (K,\pi )|<1.75\), to ensure the selection of well-reconstructed daughter tracks;
-
each track should have at least two MVD hits in both the \(\text {Z}\) and the \(\phi \) directions and pass through at least three CTD superlayers, to improve further the quality of the daughter tracks;
-
the mass difference \(\varDelta M =M(K\pi \pi )-M(K\pi )\) should not be within \(0.143< \varDelta M <{0.148}\) GeV, which is the difference between the \(D^{*+}\) and \(D^{0}\) masses, to reduce background from \(D^{*+}\) mesons decaying in the “golden” channel \({D^{*+} \rightarrow D^{0} \pi _s^{+}}\), \({D^{0} \rightarrow K^{-}\pi ^{+}}\) (see Sect. 4.1), which result in identical final states;
-
the invariant mass of a combination of the kaon and any of two pion daughter tracks assuming that they are kaons, M(KK), should not be within \(1.0115< M(KK) <{1.0275}\) GeV. This cut reduced background from \(D_s^{+}\) mesons decaying in the channel \(D_S^{+}\rightarrow \phi \pi ^{+}\) with subsequent \(\phi \rightarrow K^{-}K^{+}\), which result in similar final states with an asymmetric mass peak (a so-called reflection).
An example of an event with a selected \(D^{+}\) candidate, displayed in the ZEUS Event Display program, is shown in Fig. 22.
5.5 Extraction of \(D^{+}\) signal
Figure 23 shows the invariant mass distribution \(M(K\pi \pi )\) of the selected \(D^{+}\) candidates. For comparison, the same distribution selected without the cuts on the decay-length significance and \(\chi ^{2}\) of the secondary vertex is also shown. The cuts applied on \(S_l\) and \(\chi ^{2} _\mathrm{sec~vtx}\) improved the statistical significance by a factor of 3 (a similar conclusion can also be drawn from Fig. 21). To extract the number of reconstructed \(D^{+}\) mesons, the mass distribution was fitted to a function
where the signal component, \(F_\mathrm{signal}(M)\), is given by a modified Gaussian function:
and the background component, \(F_\mathrm{background}(M)\), is given by a second-order polynomial. The signal position, \(M_0\), the peak width, \(\sigma _M\), as well as the signal normalisation parameter, C, and parameters of the background component were free parameters in the fit. The parameter \(\beta \) of the modified Gaussian function controls the deviation of its tails from the normal distribution (\(\beta =0\)); the central value \(\beta =0.5\) was chosen to get the best description of the peak, while it has been varied in order to estimate the systematic uncertainty (see Sect. 5.6.6). The fit was performed using the least-squares method as implemented in the MINUIT package [200]. As the expectation values in the \(\chi ^{2}\)-function, the integrals of the fit function within each bin of M were used. To account for possible non-linearities, the fit uncertainty was calculated as the average of the positive and negative fit uncertainty, obtained with the MINOS algorithm [201].
The number of \(D^{+}\) mesons yielded by the fit is \(N(D^{+})={8356\pm 198}{}\). The fitted position of the peak is \(M_0=1868.97\pm {0.26}\) MeV, where only the statistical uncertainty is quoted, and is consistent with the PDG value of \(1869.62\pm {0.15}\) MeV [199]. The peak width is \(\sigma =12.2\pm {0.3}\) MeV, driven by the momentum resolution of the detector.
5.6 Cross-section determination
The differential cross section as a function of a given observable Y in the ith bin was determined as
where \(\varDelta Y_i\) is the width of the \(i^\mathrm{th}\) bin, \(N_\mathrm{DATA}^{}\) is the number of the reconstructed \(D^{+}\) mesons in the data and \(N_{\mathrm{MC}~b}^\mathrm{reco}\) is the number of \(D^{+}\) mesons from beauty-hadron decays, as predicted by RAPGAP. The latter was additionally scaled by 1.6 according to previous ZEUS measurements [202,203,204] of beauty production in DIS. The determination of the cross section accounts for the branching ratio, \(\mathcal {B}(D^{+} \rightarrow K^{-}\pi ^{+}\pi ^{+})=9.13 \pm 0.19\%\) [199], the acceptance correction, \(\mathcal {A}\), the radiative correction, \(\mathcal {C^\mathrm{rad}}\), and the contribution from beauty-hadron decays. The radiative corrections were applied to correct the measured cross sections corresponding to the QED Born level; more details as regards their calculations can be found in [181]. The determination of the acceptance corrections is described in Sect. 5.6.1.
5.6.1 Acceptance correction
MC simulations were used to determine efficiency, \(\mathcal {E}\), purity, \(\mathcal {P}\), and acceptance \(\mathcal {A}\). For the ith bin these quantities are defined as
where \(N_i^\mathrm{gen}\) and \(N_i^\mathrm{rec}\) are the numbers of the signal events, generated and reconstructed in the \(i\mathrm{th}\) bin, respectively. The notation \(N_i^\mathrm{gen}\bigcap N_i^\mathrm{rec}\) in the numerators means that events must be generated and reconstructed in the same bin. Therefore, the efficiency is the portion of events generated in a given bin that were also reconstructed in the same bin; it determines the dependence of the measurement on the MC simulations. The purity is the portion of events reconstructed in a given bin that were also generated in the same bin; it determines the level of migrations of events to different bins. The purity plots for \(p_T(D^{+})\), \(\eta (D^{+})\), \(Q^2\) and y are provided in Appendix A; the purity values are typically above 80%. Finally, the acceptance determines the correction from detector to generator level required to calculate the cross section.
5.6.2 Comparison of data and MC
To get the correct acceptance, the MC simulations must describe the shapes of all kinematic variables in the data. The acceptance determined from the MC and integrated over some variable, x, is given by
where the integration is performed over the full range of the variable x, \(\mathcal {A}(x)\) is the acceptance at a fixed value of x and \(\frac{\text {d}\sigma }{\text {d}x}\) is the differential cross section as a function of x, used in the MC simulations. The correct detector simulation guarantees the correct value of \(\mathcal {A}(x)\), although \(\frac{\text {d}\sigma }{\text {d}x}\) is the generator-level cross section, thus even for correct \(\mathcal {A}(x)\) at all x, incorrect \(\frac{\text {d}\sigma }{\text {d}x}\) will lead to an incorrect total acceptance \(\mathcal {A}\).
Therefore the differential distributions of kinematic variables from the MC simulations and from the data were compared with each other; these comparison plots are referred to as control plots. Since the MC simulations usually describe the shapes of kinematic distributions, but not the normalisation, and, moreover, the acceptance does not depend on the MC normalisation, the MC distributions are renormalised to the data. To estimate the goodness of the description, for each control plot the \(\chi ^{2}/n_{\text {dof}}\) were calculated as follows:
where the sum goes over all bins, \(N_i^\mathrm{DATA}\) and \(N_i^\mathrm{MC}\) are the number of signal events in the \(i\mathrm{th}\) bin in the data and MC, respectively, \(\sigma _i^\mathrm{DATA}\) and \(\sigma _i^\mathrm{MC}\) are the corresponding statistical uncertainties on \(N_i^\mathrm{DATA}\) and \(N_i^\mathrm{MC}\), respectively, and \(n_{\text {dof}} \) is the number of bins minus one.Footnote 20
Figure 24 shows the control plots for \(p_T(D^{+})\), \(\eta (D^{+})\), \(Q^2\) and y. The data are compared to the sum of charm and beauty MC; the beauty contribution was scaled by 1.6 [202,203,204], while the charm contribution was renormalised to the difference between the data and re-scaled MC beauty.Footnote 21 The beauty contribution is shown separately; typically it is below \(5\%\). More control plots can be found in Appendix A (Fig. 78). The MC does not describe well the shapes of \(p_T(D^{+})\), \(\eta (D^{+})\) and \(Q^2\), thus the generator-level MC cross sections had to be reweighted.Footnote 22 The reweighting procedure is described later in this section.
Figure 25 shows control plots for \(S_l\) and \(\chi ^{2} _\mathrm{sec~vtx}\), obtained before applying the cuts on these quantities. MC simulations describe these distributions well. This fact is of crucial importance, because the detector acceptance strongly depends on the cuts applied on \(S_l\) and \(\chi ^{2} _\mathrm{sec~vtx}\), so that an incorrect simulation of their shape would lead to large systematic uncertainties; this was the dominant systematic uncertainty in the previous analysis [170], performed with an inferior tracking alignment and calibration.
5.6.3 Data to MC matching
A general rule of the MC reweighting approach is that the kinematic weights must be applied at the generator level only. This is straightforward for reweighting in inclusive event quantities, e.g. \(Q^2\), although it becomes complicated if the shapes of \(D^{+}\) kinematic variables should be corrected (namely \(p_T(D^{+})\) and \(\eta (D^{+})\)), because:
-
in each MC event there may be more than one generated \(D^{+}\) mesons;
-
the efficiency of the \(D^{+}\) reconstruction in the present analysis is not very high (\(\mathcal {E}=1.5\)–\(15\%\) depending on \(p_T(D^{+})\); see Fig. 77 in Appendix A), thus for a large fraction of events, the reweighting of all generated \(D^{+}\) mesons will result in a reweighting of the combinatorial background, which does not make sense and potentially may introduce an additional systematic uncertainty.
These complications arise from the fact that according to the general rule weights must be applied for events, while the control plots allow their determination for candidates for \(D^{+}\) only. If applied for events, weights are unique for both generator and reconstructed level, while if applied for candidates, the uniqueness is lost.
Therefore in the present analysis a procedure of matching between true and reconstructed \(D^{+}\) candidates was developed. It contained two steps:
-
1.
for each daughter track the corresponding generator-level particle was matched, if the following criteria (motivated by the resolution of the tracking system) were fulfilled:
-
\(|\varDelta p_T|=|p_T^\mathrm{gen}-p_T^\mathrm{rec}|<{0.2}\) GeV, where \(p_T^\mathrm{gen}\) and \(p_T^\mathrm{rec}\) are the transverse momenta of the generated and reconstructed particles, respectively, and
-
\(\varDelta R=\sqrt{(\phi ^\mathrm{gen}-\phi ^\mathrm{rec})^2+(\eta ^\mathrm{gen}-\eta ^\mathrm{rec})^2}<0.035\), where \(\phi ^\mathrm{gen}\) and \(\phi ^\mathrm{rec}\) are the azimuthal angles of the generated and reconstructed particles, respectively, and \(\eta ^\mathrm{gen}\) and \(\eta ^\mathrm{rec}\) are the pseudorapidities of the generated and reconstructed particles, respectively;
-
-
2.
if all daughter tracks were successfully matched to generator-level particles and if the generator-level particles originated from a \(D^{+}\) meson in the considered decay channel,Footnote 23 the reconstructed \(D^{+}\) candidate was considered to be successfully matched to the generator-level one.
The efficiency of this matching procedure was found to be very close to 100% [205].Footnote 24 Note that the matching procedure is needed also to determine purity and efficiency [the numerators in (5.12)], although it is not needed for the accpetance determination.
5.6.4 MC reweighting
Since transverse momentum \(p_T(D^{+})\) and virtuality \(Q^2\) are significantly correlated, reweighting in these two variables was performed simultaneously, while the cross section in pseudorapidity \(\eta (D^{+})\) was reweighted independently. In both cases step functions determined from the control plots as the ratios of the number of signal events in the data to the number of signal events in the charm MC were used as reweighting functions. The beauty MC contribution was subtracted from the data and reweighting was applied only to the charm MC. The reweighting functions are shown in Fig. 26. For the reweighting in \(p_T(D^{+})\) and \(\eta (D^{+})\) only the matched \(D^{+}\) candidates, as explained in Sect. 5.6.3, were reweighted at the reconstruction level, because the reweighting of non-reconstructed \(D^{+}\) effectively would result in a meaningless reweighting of combinatorial background, thus producing additional statistical fluctuations. For the acceptance calculation according to Eq. (5.12), all \(D^{+}\) were reweighted at the generator level (for the \(N_i^\mathrm{gen}\) calculation).Footnote 25
The control plots for \(p_T(D^{+})\), \(\eta (D^{+})\) and \(Q^2\) after reweighting are shown in Fig. 27. The reweighted MC simulations describe the data well and were used to determine acceptance corrections. The acceptance as a function of \(p_T(D^{+})\), \(\eta (D^{+})\), \(Q^2\) and y is shown in Fig. 28. It is not high, mainly because of the strong cut applied on the decay-length significance in order to reduce combinatorial background, varying from \(1.5\%\) at low \(p_T(D^{+})\) to \(15\%\) at high \(p_T(D^{+})\). The same plots for purity and efficiency are provided in Appendix A (Figs. 76, 77).
5.6.5 Additional corrections
Additional corrections were applied in the MC simulations:
-
trigger-inefficiency correction. Most of the First Level Trigger bits (see Sect. 3.2.2) used in this analysis had some requirements on the track multiplicity in the events. The efficiency of these criteria was measured [181] using a trigger without track requirements and the detector simulation was tuned to match the data. The trigger-inefficiency corrections for the MC simulations were between 1–10% for different tracking requirements. The corrections changed the overall efficiency of the triggers used in the analysis by a negligible amount for medium-\(Q^2\) values and up to \(\sim \)2% for the low- and high-\(Q^2\) regions. More details as regards this study can be found in [181].
-
Tracking-inefficiency correction. A special study [206] was performed to assess the tracking inefficiency for charged pions due to hadronic interactions in the detector material and how well the MC simulations reproduce these interactions. The MC simulations were found to underestimate the interaction rate by about 40% for \(p_T < {1.5} \, \mathrm{GeV}\) and to agree with the data for \(p_T > {1.5}\, \mathrm{GeV}\); more details can be found in [206] and the references therein. A corresponding correction was applied to the MC simulations. The effect of the correction on the \(D^{+}\)-production cross section was found to be about 3%. The effect of the correction on the \(D^{+}\) differential cross sections is provided in Appendix A (Fig. 79).
-
Decay-length smearing. The \(S_l\) distribution was found to be asymmetric [181] with respect to zero, with charmed mesons dominating in the positive tail. Detector resolution effects cause the negative tail, which is dominated by light-flavour events. A smearing was applied to the decay length of a small fraction of the MC events in order to reproduce the negative decay-length data. The parameters of the smearing had to be tuned to describe the data. The effect of the smearing is typically below 3%. More details as regards this correction can be found in [181].
5.6.6 Systematic uncertainties
The systematic uncertainties were determined by changing the analysis procedure or varying parameter values within their estimated uncertainties and repeating the extraction of the signals and the cross-section calculations. The following sources of systematic uncertainties were considered with the impact on the cross sections given in parentheses:
-
The cut on the positions \(|x_{e^{\prime }}|\) and \(|y_{e^{\prime }}|\) of the scattered electron in the RCAL was varied by \({\pm 1}\) cm in both the data and the MC simulations, to account for potential imperfections of the detector simulation near the inner edge of the CAL (±1%).
-
The reconstructed electron energy was varied by \(\pm 2\%\) in the MC only, to account for the uncertainty in the electromagnetic energy scale (<1%).
-
The energy of the hadronic system was varied by ±3% in the MC only, to account for the uncertainty in the hadronic energy scale (<1%).
-
The FLT tracking-efficiency corrections for the MC were varied within their estimated uncertainties (<1%) [181].
-
Uncertainties due to the signal-extraction procedure were estimated by repeating the fit in both the data and the MC using:
-
An exponential function for the background parametrisation (<1%).
-
A signal parametrisation changed by simultaneously varying the \(\beta \) parameter of the modified Gaussian function (see Eq. (5.10)) in the data and MC by \({}^{+0.1}_{-0.2}\) from the nominal value 0.5. The range was chosen to cover the values which give the best description of the mass peaks in the data and MC simulations in bins of the differential cross sections (\({}^{+0.7\%}_{-1.5\%}\)).
-
-
Uncertainties due to the decay-length smearing procedure were estimated by varying its parameters by \(\pm 50\%\) (\(\pm 1\%\)) [181]. As a further cross check, the cut on the decay-length significance was varied between 3 and 5. The resulting variations of the cross sections were compatible with the variation of the decay-length smearing and were therefore omitted to avoid double counting.
-
The scaling factor for the MC beauty-production cross sections was varied by \(\pm 0.6\) from the nominal value 1.6. This was done to account for the range of the RAPGAP beauty-prediction normalisation factors extracted in various analyses [202,203,204] (\(\pm 2\%\)).
-
The uncertainties due to the model dependence of the acceptance corrections were estimated by varying the shapes of the kinematic distributions in the charm MC sample in a range of good description of the data:
-
The shape of the \(\eta (D^{+})\) reweighting function (\(\pm 2\%\)).
-
The shape of the \(p_T(D^{+})\)–\(Q^2\) reweighting function (\(\pm 4\%\)).
-
-
The uncertainty of the pion track inefficiency due to nuclear interactions was evaluated by varying the correction applied to the MC by its estimated uncertainty of \(\pm 50\%\) of its nominal size (\(\pm 1.5\%\)).
-
The contribution from the PHP processes was estimated using the PYTHIA MC sample and found to be <0.5%, therefore it was neglected.
-
Overall normalisation uncertainties:
-
The simulation of the MVD hit efficiency (\(\pm 0.9\%\)) [181].
-
The effect of the description of \(\chi ^{2} _\mathrm{sec~vtx}<10\) was checked by multiplying \(\chi ^{2} _\mathrm{sec~vtx}\) for \(D^{+}\) candidates in the MC simulations by a factor 1.1 to match the distribution in the data (\(+2\%\)) [181].
-
The branching-ratio uncertainty (\(\pm 2.1\%\)).
-
The measurement of the luminosity (\(\pm 1.9\%\)).
The size of each systematic effect was estimated bin-by-bin except for the overall normalisation uncertainties. The overall systematic uncertainty was determined by adding the above uncertainties in quadrature. The normalisation uncertainties due to the luminosity measurement and that of the branching ratio were not included in the systematic uncertainties on the differential cross sections.
-
5.7 Theoretical calculations
NLO QCD predictions were obtained in the FFNS with the HVQDIS program [63] (see Sect. 2.4.3). The renormalisation and factorisation scales were set to \(\mu _r = \mu _f = \sqrt{Q^2+4 m_c^2}\) and the c-quark pole mass to \(m_c = {1.5}~\mathrm{GeV}\). The FFNS variant of the ZEUS-S NLO QCD PDF fit [207] to inclusive DIS data was used as the parametrisation of the proton PDFs. The same charm mass and choice of scales were used in the fit as in the HVQDIS calculation. The strong coupling constant was set to \(\alpha _s^{n_f=3}(M_Z) = 0.105\), corresponding to \(\alpha _s^{n_f=5}(M_Z) = 0.116\).
To calculate \(D^{+}\) observables, events at the parton level were interfaced with a fragmentation model based on the Kartvelishvili function [118]. The fragmentation was performed in the \(\gamma ^{*}p\) centre-of-mass frame. The Kartvelishvili parameter, \(\alpha _K\), was parametrised [181] as a smooth function of the invariant mass of the \(c \bar{c}\) system, \(M_{c \bar{c}}\), to fit the measurements of the \(D^{*+}\) fragmentation function by ZEUS [208] and H1 [122]: \(\alpha _K (M_{c \bar{c}}) = 2.1 + 127/(M_{c \bar{c}}^2 - 4 m_c^2)\), with \(m_c\) and \(M_{c \bar{c}}\) in \(\mathrm{GeV}\). In addition, the mean value of the fragmentation function was scaled down to 0.95 since kinematic considerations [209] and direct measurements [210] show that, on average, the momentum of \(D^{+}\) mesons is 5% lower than that of \(D^{*+}\) mesons; this is due to some of the \(D^{+}\) mesons originating from \(D^{*+}\) decays. For the fragmentation fraction, \(f(c \rightarrow D^{+})\), the value \(0.2297 \pm 0.0078\) was used [211].
The uncertainties on the theoretical predictions were estimated as follows:
-
the renormalisation and factorisation scales were independently varied up and down by a factor of 2;
-
the c-quark mass was consistently changed in the PDF fits and in the HVQDIS calculations by \(\pm {0.15}~\mathrm{GeV}\);
-
the proton PDFs were varied within the total uncertainties of the ZEUS-S PDF fit;
-
the fragmentation function was varied by changing the functional dependence of the parametrisation function \(\alpha (M_{c \bar{c}})\) within uncertainties [181];
-
the fragmentation fraction was varied within its uncertainties.
The total theoretical uncertainty was obtained by summing in quadrature the effects of the individual variations. The dominant contributions originate from the variations of the c-quark mass and the scales. In previous studies [60] the uncertainty due to the variation of \(\alpha _s^{n_f=3}(M_Z)\) was found to be insignificant and neglected here.
5.8 Results
The production of \(D^{+}\) mesons in the process \(ep \rightarrow e' c \bar{c} X \rightarrow e' D^{+} X\) (i.e. not including \(D^{+}\) mesons from beauty decays) was measured in the kinematic range:
The differential cross sections are defined according to Eq. (5.11). The measured cross sections in bins of \(p_{T}(D^{+})\), \(\eta (D^{+})\), \(Q^{2}\) and y are listed in Table 2 and shown in Fig. 29. The cross section falls by about three orders of magnitude over the measured \(Q^2\) range and one order of magnitude in y; it also falls with the transverse momentum \(p_{T}(D^{+})\), but is only mildly dependent on the pseudorapidity \(\eta (D^{+})\). The measured cross sections are compared to the results of the previous ZEUS \(D^+\) measurement [170],Footnote 26 based on a subset of the HERA-II data. The present measurement has significantly smaller uncertainties and supersedes the previous results. The NLO QCD predictions, calculated in the FFNS, provide a good description of the data. The experimental uncertainties are smaller than the theoretical uncertainties, apart from the high-\(Q^2\) region, where statistics is limited.
The measured cross sections as a function of y in five \(Q^2\) bins are listed in Table 3 and shown in Fig. 30. The data are well reproduced by the HVQDIS calculation. The effects of individual sources of systematic uncertainties (described in Sect. 5.6.6) on the cross sections in bins of \(Q^2\) and y can be found in [4]. The measured double-differential cross section as a function of \(Q^2\) and y has been used to extract the charm contribution \(F_2^{c\bar{c}}\) to the proton structure function; the results can be found in [4].
In summary, the present results supersede the previous ZEUS \(D^{+}\) measurement, based on a subset of the data, and exhibit significantly better precision. The improvement in precision comes from the larger data sample, used in the present analysis and from a better control of experimental systematic uncertainties, owing to improved tracking alignment and calibration. Predictions from NLO QCD in the FFNS describe the measured cross sections well. The results presented here are of similar or higher precision than measurements of charm production, previously published by ZEUS.Footnote 27 The new precise data provide an improved check of pQCD and provide further constrains on the PDFs in the proton. Section 6.5 uses these data for the HERA charm combination.
6 Combination of the HERA charm measurements
This section is devoted to the combination of the open charm measurements at HERA in DIS. Measurements of open charm production at HERA provide an important input for tests of QCD. As outlined in Sect. 2.4, c quarks in \(ep\) collisions are predominantly produced by the boson–gluon-fusion process, \(\gamma g \rightarrow c \bar{c}\), thus charm production is sensitive to the gluon distribution in the proton, and charm measurements are a valuable input for studies of the proton structure and for the extraction of the c-quark mass.
Section 6.1 explains the motivation and gives an overview of general aspects of the procedure. Section 6.2 describes the procedure of cross-section averaging, the extrapolation to a common phase-space region and the treatment of experimental uncertainties. Details of the theoretical calculations in the FFNS, which were used in the combination procedure for phase-space corrections and for the comparison with the combined data, are given in Sect. 6.3. In Sects. 6.4 and 6.5 the main results are presented: a combination of visible \(D^{*+}\) cross sections and reduced charm cross sections, respectively. Finally, Sect. 6.6 gives a summary of the results.
6.1 Introduction
The main goal of a data combination is to obtain a single consistent dataset for a given physical process. State-of-the-art QCD analysis procedures use data from a number of individual experiments. The data points are correlated through common systematic uncertainties, within and also across the publications. The procedure can be significantly simplified by averaging the input data in a model-independent way before performing a QCD analysis of that data [212]: e.g. combined into a single dataset DIS charm cross-section measurements are much easier to handle than a scattered set of individual experimental measurements, reviewed in Sect. 4, while retaining the full correlations between data points. Also, a combination serves as a consistency cross check of the input data: a study of the global \(\chi ^{2}/n_{\text {dof}}\) of the average and the distribution of the pulls allows a model-independent consistency examination between the measurements. Although a combination is not supposed to provide new information, it is possible that a combination will give an extra reduction of correlated uncertainties due to usage of information from the phase-space corners which normally would not be used in analyses or theory fits.
A combination requires input data in the same bins covering the same phase-space region. Considering the existing charm measurements at HERA, there are two strategies for the combination:
-
to combine a limited number of measurements that closely fulfill the above requirement;
-
to combine all relevant measurements extrapolated to a common phase-space region and common bins.
The former provides a model-independent combination (or with minimised model dependency) which retains most of original information; this strategy is followed in the combination of the visible \(D^{*+}\) cross sections (Sect. 6.4). The latter gains from a big number of input measurements, thus it has ultimate accuracy at the cost of some model dependence and a sizeable theoretical uncertainty from the extrapolation procedure; this strategy is followed in the combination of the reduced charm cross sections (Sect. 6.5).
6.2 Combination procedure
In this section common aspects of the combination procedure are described: the combination method, needed to average quantities given in a common phase-space region (Sect. 6.2.1), the treatment of uncertainties of input quantities in the combination method (Sect. 6.2.2), and phase-space corrections, needed to translate the input quantities to a common phase-space region (Sect. 6.2.3).
6.2.1 Combination method
The HERAverager package [213]Footnote 28 is used for the combination of the charm data. It is an averaging tool developed for the H1 and ZEUS data combination. The combination method is based on the minimisation of the \(\chi ^{2}\)-function which includes correlated systematic uncertainties using the nuisance-parameter technique, also known as the Hessian method [214].
\(\chi ^{2}\) definition
Consider \(N_e\) sets of measurements of \(N_m\) quantities \(\mu _i\) (e.g. from different experiments or from one experiment, but obtained in different analyses), \(\mu _i^e\). Each measurement has one uncorrelated uncertainty, \(\sigma _i^e\), and \(N_s\) correlated, \(\varGamma _i^{e,j}\): \(\mu _i^e \pm \sigma _i^e \pm \sum _{j=1}^{N_s}\varGamma _i^{e,j}\) (\(1 \le i \le N_m\), \(1 \le e \le N_e\), \(1 \le j \le N_s\)).
All correlated uncertainties are assumed to be Gaussian. Thus each measurement can be written as
where \(a_i^e\) and \(b^{e,j}\) are independent variables distributed according to the unit Gaussian distribution around zero. Note that \(b^{e,j}\) are independent of i; that is, the uncertainties \(\varGamma _i^{e,j}\) are \(100\%\) correlated for all data points denoted with the same e. The \(b^{e,j}\) are called nuisance parameters of correlated uncertainties. Then the generalised \(\chi ^{2}\) can be written as
where the vectors \(\mathbf {m}\) and \(\mathbf {b}\) denote the true parameters \(m_i\) and nuisance parameters \(b^{e,j}\), respectively. Here the first term takes into account the effects of the shifts of the correlated uncertainties, and the second term is a penalty for the correlated uncertainty shifts from their nominal (zero) values. The uncorrelated uncertainties \(\sigma _i^e\) are the total uncorrelated uncertainties which may consist of several independent components (e.g. a statistical uncertainty and several different systematic ones, assumed to be uncorrelated between the data points) added in quadrature, according to the law of combination of errors [215, 216]. Note that some of \(\varGamma _i^{e,j}\) may be equal to 0 if the measurement \(\mu _i^e\) is insensitive to the systematic source j. A formal derivation of the \(\chi ^{2}\) expression (6.2) from the assumption (6.1) can be found in [217]. The averaging problem is solved by minimising \(\chi ^{2} (\mathbf {m},\mathbf {b})\) w.r.t. \(\mathbf {m}\) and \(\mathbf {b}\), providing the average values \(\overline{\mathbf {\mathbf {m}}}\) and the fitted nuisance parameters \(\overline{\mathbf {b}}\); a variation of \(\chi ^{2} (\mathbf {m},\mathbf {b})\) by 1 provides the uncertainties on these values. The formulae for these quantities are provided in Appendix B.1.
The Hessian method usually leads to a reduction of correlated uncertainties in the combination procedure. This is a considerable advantage compared to the more conservative offset method [218], when error propagation is based on shifting the data by the systematic errors and adding the deviations in quadrature, therefore the size of the correlated uncertainties remains unchanged.
So far the form of the correlated uncertainties \(\varGamma _i^{e,j}\) was not specified. It is useful to define the relative correlated systematic uncertainties by the ratio
Usually the relative, not absolute, systematic uncertainties are provided by the measurements. Several types of uncertainty treatment can be considered:
-
the multiplicative treatment, when the systematic uncertainties are proportional to the true values:
$$\begin{aligned} \varGamma _i^{e,j}=m_i \gamma _i^{e,j}; \end{aligned}$$(6.4) -
the additive treatment, when the systematic uncertainties are independent of the true value; then they are considered to be proportional to the measured values, i.e. by the definition (6.3), or independent of either:
$$\begin{aligned} \varGamma _i^{e,j}=\mu _i \gamma _i^{e,j} \end{aligned}$$(6.5)(in other words they are constant and not changed in the combination procedure);
-
a mixed case is the signal-dominated statistical uncertainties, which obey the Poisson statistics; their values are scaled with the square root of \(m_i\):
$$\begin{aligned} \varGamma _i^{e,j}=\sqrt{\mu _i m_i} \gamma _i^{e,j}. \end{aligned}$$
The same options exist for the treatment of the uncorrelated uncertainties in the denominator of Eq. (6.2). The additive treatment is appropriate for background-dominated uncertainties, which do not depend on the true value \(\mathbf {m}\), while the multiplicative treatment is appropriate for all others.
For the charm measurements at HERA the statistical uncertainties are mainly dominated by background, so in the combination they were treated additively. The systematic uncertainties are predominantly proportional to the central values and thus treated multiplicatively. So the \(\chi ^{2}\)-function, used in the present combination, is given by
where in the denominator the statistical and uncorrelated systematic uncertainties are added in quadrature; \(\delta _{\mathrm{stat},i}^e\) and \(\delta _{\mathrm{uncor},i}^e\) are the relative statistical and uncorrelated systematic uncertainties, respectively, defined similar to (6.3):
where \(\sigma _{\mathrm{stat},i}^{e}\) and \(\sigma _{\mathrm{uncor},i}^{e}\) are the absolute statistical and uncorrelated systematic uncertainties, respectively. In the previous combination of the reduced charm cross sections [60] the sensitivity of the result to the treatment of the uncertainties was studied and procedural uncertainties were assigned; however, they turned out to be much smaller than the other ones (on average below 0–10% of the total uncertainty, reaching up to 40% only at few combined points [60]) and are neglected in the present combination.
6.2.2 Treatment of systematic uncertainties
As explained in Sect. 6.2.1, in the combination procedure uncertainties are treated either as fully uncorrelated or fully correlated between the data points of certain measurements. Neither of these is conservative in general. Experimental uncertainties of the input measurements consist of statistical and systematic uncertainties. The statistical component of uncertainties was always treated as uncorrelated between all data points.Footnote 29
The systematic component of uncertainties, in general, may have mixed nature: it may be partially correlated between the data points; moreover, the level of correlation may differ in different phase-space regions. In the current combination procedure the following “common sense” strategy was applied:
-
normalisation uncertainties (reported as a single number) were treated as correlated (e.g. luminosity and branching ratios); they are marked as ‘N’;
-
those uncertainties that have smooth behaviour in the phase space of the measurement were also treated as correlated (typically these are different kinds of corrections, reweightings, inefficiencies etc., evaluated using studies based on MC); they are marked as ‘S’;
-
theory-related uncertainties that arose from the phase-space corrections (see Sect. 6.2.3) were treated as correlated; they are marked as ‘T’;
-
all other uncertainties were treated as uncorrelated (typically these are uncertainties estimated using cut variations in data, which are subject to statistical fluctuations).
Explicit information on the sources that were treated as correlated is given in Sects. 6.4.1, 6.4.3 and 6.5.1.
Many of the experimental systematic uncertainties are quoted as asymmetric and have been symmetrised before performing a combination. For the measurements [4, 30, 172], which have not been included in the previous charm combination [60], symmetrisation consisted in taking the largest deviation; no corrections to the central values were applied. For those measurements that have been included in the previous charm combination [60], the symmetrisation remains the same as in [60].Footnote 30
6.2.3 Phase-space correction
Whenever the quantities to be averaged are measured in different phase-space regions, they have to be corrected before performing a combination. Assume that there is a measured quantity (e.g. a cross section) in the phase-space region 1, \(\sigma ^\mathrm{meas}_1\), which needs to be shifted into the phase-space region 2. The correction procedure is called extrapolation and relies on usage of theoretical calculations:
Here \(\sigma ^\mathrm{th}_1\) and \(\sigma ^\mathrm{th}_2\) are the predicted quantities in the phase-space regions 1 and 2, respectively. The closer the phase-space regions 1 and 2 (in particular, the more they overlap), the less model dependency the extrapolated quantity, \(\sigma ^\mathrm{extr}_2\), has. In order to estimate the remaining model dependence, the parameters of the theoretical calculations are varied; the resulting uncertainty is called the extrapolation uncertainty. In addition to the extrapolation uncertainty the extrapolated quantity \(\sigma ^\mathrm{extr}_2\) has an original uncertainty of \(\sigma ^\mathrm{meas}_1\) (which, for instance, may consist of statistical and systematic uncertainties of the experimental measurement).
It is important to distinguish between “small” extrapolations to another region of a measured phase-space region (these can be thought of rather as interpolations), referred to in the future as swimming, e.g. when a quantity is translated into a different binning scheme, and actual extrapolation to an unmeasured phase-space region, referred to in the future just as extrapolation. In the first case it is important that the original measurement in general covers all the phase-space region where the swimming is performed, so the predictions can be compared to the measurements in order to check the adequacy of the swimming. In contrast, in the second case the results of the extrapolation depend on theoretical predictions in unmeasured phase-space corners; thus in general the adequacy of the results cannot be verified unless there are other measurements in the uncovered regions. Note that in both cases the corrections do not depend on common normalisation factors. For the combinations presented in this review, the combination of \(D^{*+}\) cross sections requires only swimming, while the combination of reduced charm cross sections requires genuine extrapolation.
For the charm combination presented here, phase-space corrections were always done using the theory outlined in Sect. 2.4.3: the NLO QCD calculations (\(O(\alpha _s^2)\)) in the 3-flavour FFNS. Details of the theoretical calculations (including the variations which are used to estimate the extrapolation uncertainties) are given in Sect. 6.3.
6.3 Theoretical calculations in FFNS
The FFNS theoretical calculations were used for two purposes:
-
for the extrapolation and swimming corrections (Sects. 6.4.1, 6.4.3, 6.5.1);
-
for the comparison of theory to the combined data and QCD analyses (Sects. 6.4.1, 6.4.3, 6.5.3).
NLO QCD predictions in the FFNS were obtained with the HVQDIS program [63]. The parameters used in the calculations, together with the corresponding variations which were used to estimate the uncertainties, are described below.Footnote 31 In the combination procedure each extrapolation uncertainty was treated as correlated between all points and all measurements. Most of the extrapolation uncertainties were originally asymmetric and have been symmetrised before performing the combination. Symmetrisation was performed by taking the largest deviation; no corrections to the central values were applied. For the data to theory comparison, to obtain total theoretical uncertainties, all the variations were added in quadrature and the summation was performed separately for positive and negative variations.
6.3.1 Parton-level cross sections
The parton-level cross sections were calculated using the following settings:
-
The renormalisation and factorisation scales were set to \(\mu _r=\mu _f=\sqrt{Q^2+4m_c^2}\) and varied up and down by a factor of two. The variations were performed independently if the theoretical predictions were used for comparison to the data, or simultaneously if they were used for extrapolation or swimming corrections (which are sensitive only to the shape of the predictions).
-
The pole mass of the c quark \(m_c=1.50 \pm 0.15\) GeV [60]; since the renormalisation and factorisation scale definitions include the c-quark mass, varying this also slightly affected the two scales.
-
The strong coupling constant \(\alpha _s^{n_f=3}(M_Z) = 0.105 \pm 0.002\), corresponding to the value \(\alpha _s^{n_f=5}(M_Z) = 0.116 \pm 0.002\).
-
The PDFs were described by a series of 3-flavour FFNS variants of the HERAPDF1.0 set [2] at NLO, similar to those used for the cross-section extrapolations in the previous charm combination [60], evaluated for \(m_c=1.5 \pm 0.15\) GeV, for \(\alpha _s^{n_f=3}(M_Z) = 0.105 \pm 0.002\), and for different scales. Charm measurements were not included in the determination of these PDF sets. For each of the parameter variations (the scales, mass and \(\alpha _s\)), a different respective PDF set was used. By default, the scales for the charm contribution to the inclusive data in the PDF determination were chosen to be consistent with the factorisation scale used in HVQDIS, while the renormalisation scale in HVQDIS was decoupled from the PDF scales, except in the cases where the factorisation and renormalisation scales were varied simultaneously. As a cross check, instead of fitting the PDFs from inclusive data, 3-flavour NLO variants of the ABM [219] and MSTW [220] PDFs were also used to evaluate the cross sections. For MSTW, the variant with \(m_c=1.5\) GeV was chosen. The differences were found to be much smaller than those from other parameter variations, therefore the PDF uncertainties are neglected; the plots are provided in Appendix C (Fig. 85).
6.3.2 Fragmentation
The fragmentation model described in the previous publication [60] was used to provide hadron-level cross sections, if needed. It is based on the measurements by H1 [122] and ZEUS [208] using the production of \(D^{*+}\) mesons, with and without associated jets, in DIS and PHP. This model uses the fragmentation function of Kartvelishvili et al. [118], controlled by the parameter \(\alpha _K\), to describe the longitudinal fraction of the c-quark momentum transferred to the \(D^{*+}\) mesons. The fragmentation was performed in the photon-proton centre-of-mass frame by rescaling the quark three-momentum, then the energy of the produced hadron was calculated and the hadron was boosted to the lab frame. The calculation of the hadron energy and the Lorentz boost were done by using the hadron mass.Footnote 32 Different values of \(\alpha _K\) [60] were used for different bins in the photon–parton centre-of-mass-frame squared energy, \(\hat{s}\), and for different hadrons. Since ground-state D mesons partly originate from decays of \(D^{*+}\) and other excited mesons, the corresponding c-quark fragmentation function is softer than that measured using \(D^{*+}\) mesons. From kinematic considerations [209], supported by experimental measurements [210], the expectation value for the fragmentation function of c quarks into \(D^{0,\text { not }D^{*+}}\),Footnote 33 \(D^+\) and in the mix of charmed hadrons decaying into muons, has to be reduced by \(\approx 5\%\) with respect to that for \(D^{*+}\) mesons. The values of \(\alpha _K\) for the fragmentation into ground-state hadrons, used for the \(D^{0,\text { not }D^{*+}}\), \(D^+\) and \(\mu \) measurements, have been re-evaluated accordingly [60] and are reported in Table 4. The model also implements a transverse fragmentation component by assigning to the charmed hadron a transverse momentum, \(k_T\), with respect to the c-quark direction, with \(\langle k_T \rangle =0.35 \pm 0.15\) GeV. If needed (for the phase-space corrections for the ZEUS muon measurement [171]), the charm-hadron cross sections were accompanied by the semi-leptonic decays from [221]. Fragmentation fractions were taken from [199, 211] and are listed in Table 5.
In total, the following uncertainties were assigned to the fragmentation:
-
the variation of \(\alpha _K\) (the upward and downward variations were performed simultaneously for all \(\hat{s}\) bins and for all hadrons);Footnote 34
-
the variation of \(\hat{s}_1\);Footnote 35
-
the variation of \(\langle k_T \rangle \);Footnote 36
-
the uncertainties on the fragmentation fractions.
6.3.3 Beauty contribution
In most of the analyses the cross sections of charmed hadrons either produced directly or in decays of beauty hadrons were measured. For the combination of reduced charm cross sections the beauty contribution needed to be subtracted, while for the data to theory comparison for \(D^{*+}\)-production cross sections it must be added to the charm theoretical predictions. In previous H1 and ZEUS charm analyses the beauty contribution had been obtained using the RAPGAP MC [194], with the normalisation rescaled to dedicated beauty measurements. Typical normalisation factors vary from 1.0 to 2.0 [30, 202,203,204, 222], thus an uncertainty \(\sim \)50% has to be assigned to the beauty contribution. Propagated to the uncertainty on charm and beauty production, this results in an uncertainty up to \(\sim \)5% and thus becomes a dominant uncertainty at high \(Q^2\), where the perturbative calculations are quite accurate. Moreover, this approach provides predictions at LO accompanied by parton showers, renormalised to measured data.
In the present study the beauty contribution was obtained at NLO: from the NLO QCD predictions for beauty hadrons with subsequent decays into charmed hadrons. A non-trivial ingredient of these calculations is the decay kinematics of beauty to charmed hadrons, which, since many individual decay channels are involved, has to be obtained from some MC generator. In Fig. 31 the distributions of D-meson momenta in the B-hadron rest frame as obtained from the PYTHIA [192] and EvtGen [223] MC generators are compared to the data from CLEO [176] and ARGUS [224]. The shape from EvtGen describes the data reasonably well, therefore it was used for the predictions.
The parameters for the beauty contribution calculations and uncertainties were:
-
The renormalisation and factorisation scales \(\mu _r=\mu _f=\sqrt{Q^2+4m_b^2}\), varied as for charm. The variations for charm and beauty were applied simultaneously.
-
The pole mass of the b quark \(m_b=4.75 \pm 0.25\) GeV.
-
The fragmentation model for b quarks based on the Peterson et al. [120] parametrisation with \(\epsilon _{b}=0.0035 \pm 0.0020\) [225].
-
The fraction of beauty hadrons decaying into charmed hadrons was taken from [199] and listed in Table 5.
-
The PDFs, described by the same set (the 3-flavour FFNS) as the one used for the corresponding charm prediction.
The dominant uncertainty comes from the variation of the fraction of beauty hadrons decaying into \(D^{*+}\) mesons; although it reaches only \(\approx \)2% in the highest \(Q^2\) bins. Since the beauty contribution itself is small (varies from \(1\%\) at low \(Q^2\) to \(7\%\) at high \(Q^2\)), all other uncertainties are negligible.
6.4 Combination of visible \(D^{*+}\) cross sections
Among all techniques used at HERA to measure open charm production (see Sect. 4), measurements of \(D^{*+}\) production have the best signal-to-background ratio and are the most precise. ZEUS and H1 have recently published single- and double-differential \(D^{*+}\) cross sections for inclusive \(D^{*+}\)-meson production in DIS from their respective final HERA-II datasets [76, 77, 172]. The measurements have been performed in similar phase-space regions and used similar binning schemesFootnote 37 thus fulfilling the requirement for a combination with minimised theory dependence.
The phase-space region of HERA-II measurements in DIS is restricted compared to that of HERA-I measurements. Due to beam-line modifications related to HERA-II high-luminosity running [131] the visible phase space of these \(D^{*+}\) cross sections at HERA-II is restricted to virtualities \(Q^2 > {5}~\mathrm{GeV}^2\). This fact prevents straightforward combination with HERA-I measurements for most of the single-differential \(D^{*+}\) cross sections, although in the case of the single- or double-differential \(D^{*+}\) cross sections as a function of \(Q^2\), the above restriction does not apply and the kinematic range can be extended to lower \(Q^2\) using earlier HERA-I measurements. In fact only the double-differential \(D^{*+}\) cross sections as a function of \(Q^2\) and y can be combined with HERA-I measurements without applying extensive swimming corrections.Footnote 38 For this reason the treatment of the visible \(D^{*+}\) cross section combination consists of two parts: a combination of single-differential \(D^{*+}\) cross sections, described in Sect. 6.4.1, and a combination of the double-differential cross section, described in Sect. 6.4.3. While the common method and strategy for both parts remain the same, the input measurements and phase-space regions differ. All measurements to be combined for the single- and double-differential \(D^{*+}\) cross sections are already corrected to the QED Born level with a running fine-structure constant and include both the charm and the beauty contributions to \(D^{*+}\) production. The results reported in this section have been published by the H1 and ZEUS Collaborations [5].
6.4.1 Combination of single-differential cross sections
First the input measurements, combination phase-space region and details of the combination procedure are given, which includes all necessary corrections needed to transform the input data to the common phase-space region. Then the results of the combination are presented and discussed. Afterwards the combined data are compared to NLO QCD predictions. As a result of a detailed comparison of data and theory a ‘customised’ theoretical calculation is introduced.
Input measurements, phase-space region and combination details
Table 6 presents the datasets used for the combination together with their visible phase-space regions and integrated luminosities. Note that the H1 Collaboration has published \(D^{*+}\) cross-section measurements separately for \(5<Q^2<100\) GeV\(^2\) (dataset I) [77]Footnote 39 and for \(100<Q^2<1000\) GeV\(^2\) (dataset II) [76] because different sub-detectors had to be employed for the detection and measurement of the scattered electron in these two regions. Thus the overall phase-space region for the combined \(D^{*+}\) cross sections is given by
The combination was done for single-differential \(D^{*+}\) cross sections as a function of the \(D^{*+}\) transverse momentum, \(p_T(D^{*+})\), pseudorapidity, \(\eta (D^{*+})\), and inelasticity, \(z(D^{*+})= (E(D^{*+})-p_Z(D^{*+}))/(2E_e y)\), with \(E_e\) being the incoming electron energy, \(E(D^{*+})\) and \(p_Z(D^{*+})\) the energy and longitudinal momentum of \(D^{*+}\), respectively, as well as of the DIS kinematic variables \(Q^2\) and y.Footnote 40
Since the H1 datasets I and II are complementary to each other and give the phase-space region of the combination (6.9), their differential \(D^{*+}\) cross sections are summed up on a bin-by-bin basis and enter the combination as a single dataset. However, due to the limited statistics at high \(Q^2\) a coarser binning scheme in \(p_T(D^{*+})\), \(\eta (D^{*+})\), \(z(D^{*+})\) and y had to be used in dataset II than in dataset I. This made a straightforward summation of the differential \(D^{*+}\) cross sections from the two measurements complicated. Therefore the cross section in a bin i of a given observable integrated in the range \(5<Q^2<1000\) GeV\(^2\) was calculated according to
Here \(\sigma _\mathrm{int}\) denotes the integrated visible cross section and NLO stands for the NLO predictions obtained from HVQDIS.Footnote 41 In this calculation both the experimental uncertainties of the visible cross section at high \(Q^2\) and the theoretical uncertainties (described in Sect. 6.2.3) were included. The contribution from the region \(100<Q^2<1000\) GeV\(^2\) to the full \(Q^2\) range amounts to 4% on average and reaches up to 50% at the highest \(p_T(D^{*+})\); the extrapolation uncertainty is negligible in most of the bins compared to the corresponding experimental uncertainty; only at the two highest \(p_T(D^{*+})\) bins it approaches 35% of the experimental uncertainty. Thus in the combination procedure the extrapolation uncertainties from all theoretical parameter variations were added in quadrature and treated as an uncorrelated uncertainty. The sensitivity of the shape to the beauty contribution was found to be negligible and therefore was ignored.
For the single-differential \(D^{*+}\) cross sections as a function of \(Q^2\), the procedure described above was not needed. However, the binning schemes used for these \(D^{*+}\) cross sections differ between datasets I–II and dataset III. At low \(Q^2\) this was solved by combining the cross-section measurements of the first two bins of dataset I into a single bin. For \(Q^2>100\) GeV\(^2\) no consistent binning scheme could be defined from the single-differential cross-section measurements \(\mathrm{d}\sigma /\mathrm{d}Q^2\) itself. However, the measurements of the double-differential \(D^{*+}\) cross section \(\mathrm{d}^2\sigma /\mathrm{d}y\mathrm{d}Q^2\) have been performed in a common binning scheme. By integrating these \(D^{*+}\) cross sections in y, single-differential \(D^{*+}\) cross sections in \(Q^2\) were obtained at \(Q^2>100\) GeV\(^2\) from datasets II, III which were used directly in the combination. The contribution to dataset III from the range \(p_T(D^{*+})>{20}~\mathrm{GeV}\) was found to be negligible (\(\ll 1\%\)).
Applying the procedure described above provided exactly two input measurements for each combined bin: one from H1 (datasets I–II) and one from ZEUS (dataset III). Thus \(n_{\text {dof}}\) is equal to the number of combined bins. Since the data are statistically correlated between the different distributions, each distribution was combined separately.
The branching ratios for datasets I, II were updated to the PDG value [199]. A full list of considered correlated sources is provided in Appendix C (Table 17). All systematic uncertainties were treated as uncorrelated between the H1 and ZEUS measurements, except for the branching-ratio uncertainty; since the latter is fully correlated between all datasets, it is not changed in the combination and was not included in the combination but applied as an external uncertainty on the results.
6.4.2 Combined \(D^{*+}\) cross sections
The results of combining the HERA-II measurements [76, 77, 172] as a function of \(p_T(D^{*+})\), \(\eta (D^{*+})\), \(z(D^{*+})\), \(Q^2\) and y are given in Table 7, together with their uncorrelated and correlated uncertainties. The total uncertainties were obtained by adding the uncorrelated and correlated uncertainties in quadrature. A detailed breakdown of the correlated uncertainties is provided in Appendix C (Table 18).
The individual datasets as well as the results of the combination are shown in Fig. 32. The consistency of the datasets as well as the reduction of the uncertainties are illustrated further for the steeply falling \(D^{*+}\) cross sections as a function of \(p_T(D^{*+})\) and \(Q^2\) in the bottom parts. The input H1 and ZEUS datasets are similar in precision. The values of \(\chi ^{2}\), \(n_{\text {dof}}\) and the corresponding \(\chi ^2\)-probabilities for the combinations of the different distributions are reported in Table 8. The combinations in the different variables have \(\chi ^2\)-probability varying between 15 and 87%, i.e. the datasets are consistent. The pull distributions are shown in Fig. 33. Although Fig. 32 indicates that the H1 data points lie on average below the ZEUS points, the pulls in Fig. 33 show an overall symmetric spread of the H1 and ZEUS input data around the combined results; this is explained by taking into account shifts of the correlated systematic uncertainties. The shifts and reductions of the correlated sources are consistent for the combinations of the \(D^{*+}\) cross sections in different variables; they are provided in Appendix C (Table 17).
The combined \(D^{*+}\) cross sections exhibit significantly reduced uncertainties. While the effective doubling of the statistics of the combined result reduces the uncorrelated uncertainties (inner error bars in Fig. 32), the correlated uncertainties (quadratic difference of the outer and inner error bars) of the combined \(D^{*+}\) cross sections are significantly reduced through cross-calibration effects between the two experiments. Typically, the two effects contribute about equally to the reduction of the total uncertainty.
Comparison with theoretical predictions
The combined \(D^{*+}\) cross sections as a function of \(p_T(D^{*+})\), \(\eta (D^{*+})\), \(z(D^{*+})\), \(Q^2\) and y are compared to the NLO QCD predictions in the FFNS (described in Sect. 6.3) in Fig. 34; there is also a dotted line referred to as ‘customised’ NLO QCD predictions shown there, which will be discussed below. In general the predictions describe the data well. The uncertainties of the data are as small as 5% over a large fraction of the measured phase-space region, while the typical theory uncertainty ranges from 30% at low \(Q^2\) to 10% at high \(Q^2\). The data points between the different distributions are statistically and systematically correlated, so they can be quantitatively compared to theory only on a one-by-one basis.
The theoretical predictions describe the combined data well within the corresponding uncertainty band, however the central theoretical curves underestimate the data normalisation. The central theoretical prediction shows a somewhat softer y distribution than the data. The central prediction for \(z(D^{*+})\) is slightly wider than the measured distribution.
‘Customised’ theoretical predictions
As stated above, in overall the theoretical uncertainties are larger than the experimental uncertainties of the combined data. Since the theoretical uncertainties depend on several correlated sources, it is rather difficult to make a strong statement about agreement between the theory and the data from Fig. 34 itself.
In order to study the impact of the current theory uncertainties in more detail, the effect of each theoretical uncertainty on the predictions was studied. The most conclusive variations on the predictions are shown separately in Fig. 35, compared with the same data as in Fig. 34. Plots with all the variations are available in Appendix C (Figs. 80, 81, 82, 83, and 84).
The NLO prediction as a function of \(p_T(D^{*+})\) (Fig. 35a) describes the data better if either
-
the c-quark pole mass is reduced to 1.35 GeV; or
-
the renormalisation scale is reduced by a factor 2; or
-
the factorisation scale is increased by a factor 2.
Simultaneous variation of both scales will largely compensate and will therefore result in a much smaller effect.
The prediction for the \(z(D^{*+})\) distribution (Fig. 35d) describes the shape of the data noticeably better if the fragmentation parameters are adjusted such that the bin boundary \(\hat{s}_1\) between the two lowest fragmentation bins [60] is set to 30 GeV\(^2\) (see Table 4). This also slightly improves the shape of the y distribution (Fig. 35b).
The preference for a reduced renormalisation scale already observed for \(p_T(D^{*+})\) is confirmed by the \(z(D^{*+})\) distribution (Fig. 35c). However, the shape of the \(z(D^{*+})\) distribution rather favours variations of the charm mass and the factorisation scale in the opposite direction to those found for the \(p_T(D^{*+})\) distribution. The other kinematic variables do not contribute any additional information to these findings.
As stated before, within the large uncertainties indicated by the theory bands in Fig. 34, all distributions are reasonably well described. However, the above study shows that the different contributions to these uncertainties do not only affect the normalisation but also change the shape of different distributions in various ways. It is therefore not a priori expected that a variant of the prediction which gives a good description in one variable will also give a good description in another.
Based on the above study, a ‘customised’ calculation was hence performed with the goal to demonstrate that it is possible to obtain an acceptable description of the data in all variables at the same time, for both shape and normalisation, within the theoretical uncertainties quoted in Sect. 6.3.Footnote 42 For this calculation:
-
The renormalisation scale was reduced by a factor 2, with the factorisation scale unchanged.
-
The change of the fragmentation parameter \(\hat{s}_1 = 30\) GeV\(^2\) was applied.
-
At this stage, the resulting distributions were still found to underestimate the data normalisation. As the renormalisation and factorisation scales are recommended to differ by at most a factor of two [106], the only significant remaining handle is the c-quark pole mass. This mass was set to \({1.4}~\mathrm{GeV}\), a value which was also found to be compatible with the partially overlapping data used for a previous dedicated study [60] of the c-quark mass.
-
All other parameters, which were found to result in a much smaller effect than those treated above, were left at their central settings as described in Sect. 6.3.
The result of this customised calculation is indicated as a dotted line in Fig. 34. Indeed a reasonable agreement with the data is achieved in all variables at the same time. This a posteriori adjustment of theory parameters may be taken as a hint in which direction theoretical and phenomenological developments might need to move:
-
the strong improvement of the description of the data relative to the central prediction through the customisation of the renormalisation scale indicates that NNLO calculations, which might reduce the scale-related uncertainties to a level which matches the data precision, are needed to obtain a more stringent statement concerning the agreement of the pQCD predictions with the data;
-
the improvement from the customisation of one of the fragmentation parameters and the still not fully satisfactory description of the \(z(D^{*+})\) distribution indicate that further dedicated experimental and theoretical studies of the fragmentation treatment will be helpful.
In general, the precise single-differential distributions resulting from the combination, in particular those as a function of \(p_T(D^{*+})\), \(\eta (D^{*+})\) and \(z(D^{*+})\), are sensitive to theoretical and phenomenological parameters in a way which complements the sensitivity of more inclusive variables like \(Q^2\) and y.
6.4.3 Combination of double-differential cross section
This section continues the \(D^{*+}\) cross-section combination and presents a combination of double-differential cross section as a function of \(Q^2\) and y.
Input measurements, phase-space region and combination details
Since for the combination of the double-differential cross section as a function of \(Q^2\) and y the restriction to the same phase-space region in \(Q^2\) does not apply, HERA-I \(D^{*+}\) measurements can be included in the combination.
Table 9 presents the datasets considered for the combination of the visible \(D^{*+}\) double-differential cross section.Footnote 43 Compared with Table 6, Table 9 contains also three most precise HERA-I measurements; it also has an additional column which reports the centre-of-mass energy, since the latter differs for one of the HERA-I measurements.
Inclusion of HERA-I measurements in the combination allows an extension of the kinematic range down to lower \(Q^2\). Although all three HERA-I measurements have different lower \(Q^2\) boundaries, a reasonable compromise between them was to choose the lower \(Q^2\) equal to \(Q^2={1.5}~\mathrm{GeV}^2\). Thus the overall phase-space region for the combined \(D^{*+}\) cross sections is given by
Some of the HERA-I measurements from Table 9 have a slightly different phase-space region and are performed at a different centre-of-mass energy. Moreover, their binning schemes for the double-differential cross section significantly differ from that which has been used for datasets I–III; dataset VI reports the double-differential cross section not as a function of \(Q^2\) and y but as a function of \(Q^2\) and x. Thus inclusion of HERA-I measurements in the combination necessarily required applying swimming corrections.
A dedicated study was performed to select those HERA-I measurements which are reasonably compatible with the HERA-II ones. At first a common binning scheme had to be chosen. Since the HERA-II measurements still remain the most precise in the combination, the double-differential cross section as a function of \(Q^2\) and y was selected with the binning scheme which is based on datasets I–III (although slightly revised to improve consistency with the HERA-I measurements). It was extended at low \(Q^2\) with the binning scheme based on the most precise HERA-I dataset IV. The new binning will be given together with the combined \(D^{*+}\) cross sections in Table 11. \(D^{*+}\) cross sections in the new bins (also referred to as destination, or output, bins) were obtained from the original bins (referred to also as input bins) using the swimming procedure described in Sect. 6.2.3. For each swum bin the following quantities were calculated:
-
the fraction of the cross section of the original bin contained in the new one, efficiency, E;
-
the fraction of the cross section of the new bin contained in the original one, purity, P;
-
the ratio of the swimming uncertainty to the experimental uncorrelated uncertainty in the corresponding bin, R.
The definitions of purity, efficiency, and swimming factor, \(F_\mathrm{sw}\), which were used to translate the differential cross section from the original bin to the destination one, are illustrated in Fig. 36. Note that in some cases for a given original bin there can be several candidates for destination bins; in this case a destination bin with maximum P, E, and minimum R was chosen. Sometimes it was advantageous to combine two input bins before swimming.
-10pt
The overlap of the binning schemes for the double-differential cross section from all input measurements and the new binning scheme is shown in Fig. 37. Figure 38 shows P vs. E, and R vs. its denominator, the experimental uncorrelated uncertainty, for all considered datasets. Since the binning scheme was chosen to be based on the HERA-II measurements, for all bins from datasets I–III purity, efficiency and the ratio satisfy \(P,E>80\%\) and \(R<10\%\) (note that in most bins \(P=E=100\%\) and \(R=0\%\), since the original and destination bins exactly coincide).
Since the purpose of the combination is to provide the visible \(D^{*+}\) cross sections, P and E should not be too low and R not too large. Thus it is natural to introduce cuts on these quantities. Several possible values for the cuts on P and E are presented in Table 10 together with the numbers of input bins which survive the cuts. A reasonable cut was chosen to be \(P,E>50\%\). Then most of the input bins from dataset IV (29 of 31) survive this selection, although it eliminates most of the bins from datasets V and VI.Footnote 44 Therefore a decision was taken to include in the combination from the HERA-I measurements only dataset IV. In addition the cut \(R<30\%\) was introduced. This eliminated three other input bins from dataset IV, so finally 26 of 31 original bins were kept. The data points removed from dataset IV mainly correspond to the low-y region where larger bins were used for the HERA-I data; additionally they suffer more from the swimming uncertainties, since the NLO QCD predictions at low y have a large mass dependence. All input bins from datasets I–III survived the above cuts on P, E and R and were kept. The swimming procedure includes the contribution to dataset IV from the range \(p_T(D^{*+})>{15}~\mathrm{GeV}\). Similar to the case of the single-differential cross-section combination (Sect. 6.4.1), the sensitivity of the shape to the beauty contribution was found to be negligible and thus was ignored.
The branching ratios for datasets I, II and IV were updated to the PDG value [199]. A full list of considered correlated sources is provided in Appendix C (Table 17). Similar to the case of the single-differential \(D^{*+}\) cross sections, all systematic uncertainties were treated as uncorrelated between H1 and ZEUS measurements, except for the branching-ratio uncertainty; although since the latter is fully correlated between all datasets, it is not changed in the combination and was not included in the combination but applied as an external uncertainty on the results.
Combined \(D^{*+}\) cross sections
The combined double-differential cross section with the uncorrelated, correlated and total uncertainties as a function of \(Q^2\) and y is given in Table 11. The total uncertainties were obtained by adding the uncorrelated and correlated uncertainties in quadrature. A detailed breakdown of the correlated uncertainties are provided in Appendix C (Table 19).
The individual datasets as well as the results of the combination are shown in Fig. 39. The combined \(D^{*+}\) cross sections exhibit significantly reduced uncertainties. The input HERA-II H1 and ZEUS datasets are similar in precision. The precision of the ZEUS HERA-I data is smaller; however, this sample also provides valuable input in some bins. In the first two \(Q^2\) bins, the combination is based on the HERA-I data only; note that the uncertainty on the combined data in these bins is a bit reduced comparing with the original one because of a reduction of the correlated systematic uncertainties.
The combination has \(\chi ^{2}/n_{\text {dof}} =38/48\); the corresponding probability is \(85\%\), indicating consistency of the input measurements and, possibly, some overestimation of the experimental systematic uncertainties. The pull distribution is shown in Fig. 40. It is close to a unit Gaussian distribution. As was seen in the results of the single-differential cross section combination (Sect. 6.4.2), although Fig. 39 indicates that the H1 data points lie on average below the ZEUS points, the pull distribution in Fig. 40 shows an overall symmetric spread of all input data around the combined results. The shifts and reductions of the correlated sources are provided in Appendix C (Table 17).
The combined cross section is compared to the NLO QCD predictions in the FFNS (described in Sect. 6.3) in Fig. 41. The customised calculation (see Sect. 6.4.1) is also shown. In general the predictions describe the data well. As seen before from the single-differential y cross section, the central theory prediction shows a somewhat softer y distribution than the data, in particular at low \(Q^2\). The data reach a precision of about 5–10% over a large fraction of the measured phase space, while the typical theory uncertainty ranges from 30% at low \(Q^2\) to 10% at high \(Q^2\), so higher-order calculations would be very helpful to match the data precision. As well as the single-differential distributions, the double-differential distribution gives additional input to test further theory improvements.
6.5 Combination of reduced charm cross sections
This section describes the combination of HERA charm-production measurements in DIS at the level of the reduced cross sections (see Eq. (2.7)). The information on charm production in DIS can be collected in a single dataset in the full phase space, integrated over \(p_T\) and \(\eta \) of the c quark, because most theoretical predictions exist only for this inclusive quantity. Since all methods used to measure charm production at HERA, introduced in Sect. 4, have limited phase-space coverage and thus must be corrected to the full phase space using theory, there are no reasons to restrict this combination to a specific phase-space region and binning scheme, and all datasets from H1 [76, 77, 167, 168] and ZEUS [4, 30, 36, 169,170,171,172] were included for which the necessary information on systematic uncertainties needed for the combination is available and which have not been superseded by later measurements up to November 2016.
The results reported in this section extend the previous combination of H1 and ZEUS charm measurements [60] by including three recent ZEUS datasets [4, 30, 172] which appeared after the combination [60] (referred to as ‘HERA 2012’) has been performed. The combination procedure was kept as close as possible to [60] to allow for a consistent comparison with the published results.
Section 6.5.1 introduces the combination details: the input datasets and treatment of their experimental uncertainties, definition of the reduced cross sections and the combination \(Q^2-x\) grid and extraction of the reduced cross sections from the visible ones, needed to put the input measurements into the common grid. In Sect. 6.5.2 the results of the combination are presented and compared with the results from [60]. In Sect. 6.5.3 the combined data are compared to the theoretical predictions in the FFNS and the running and pole charm masses are extracted from the data.
6.5.1 Combination details
Input data samples
The datasets included in the combination are listed in Table 12 and correspond to 209 individual cross-section measurements.Footnote 45 The combination includes measurements of charm production performed using different tagging techniques: the reconstruction of particular decays of D-mesons (datasets 2–7, 9, 10), the inclusive analysis of tracks exploiting lifetime information (datasets 1, 11) and the reconstruction of muons from charm semi-leptonic decays (dataset 8).
Datasets 1–8 have been used in the previous ‘HERA 2012’ combination, while datasets 9–11 were newly included. Note that dataset 9 replaced one of the datasets from ‘HERA 2012’, which is its subset.
Correlations between systematic uncertainties of different measurements were accounted for as explained in Sect. 6.2.2. All experimental systematic uncertainties were treated as independent between H1 and ZEUS. A full list of correlated sources is provided in Appendix D (Table 20). The total uncorrelated systematic uncertainties were obtained by adding individual ones in quadrature.Footnote 46
Reduced cross sections and common \(Q^2-x\) grid
The quantities to be combined are the reduced charm cross sections, defined as follows:
The cross section \({\mathrm{d}^2 \sigma ^{c\bar{c}}}/{\mathrm{d}x \mathrm{d}Q^2}\) is given at the Born level without QED and electroweak radiative corrections, except for the running electromagnetic coupling \(\alpha \).
The reduced cross sections (and not the structure functions \(F_2^{c\bar{c}}\)) were chosen for the combination because they are proportional to the directly measured double-differential cross sections. \(F_2^{c\bar{c}}\) and \(F^{c\bar{c}}_L\) depend only on \(Q^2\) and x. The presence of y in definition (6.12) leads to a dependence of \(\sigma _\mathrm{red}^{c\bar{c}} \)on the centre-of-mass energy, \(\sqrt{s}\). The combined reduced cross sections are provided at the centre-of-mass energy \(\sqrt{s}={318}~\mathrm{GeV}\).
The values of \(\sigma _\mathrm{red}^{c\bar{c}} \) for individual measurements were determined at the 52 (\(Q^2, x\)) points of a common grid, chosen such that they are close to the centre-of-gravity in \(Q^2\) and x of the corresponding bins, taking advantage of the fact that the binning schemes used by the H1 and ZEUS experiments are similar (the grid points were kept the same as in the ‘HERA 2012’ combination). For all but three grid points, at least 2 measurements entered into the combination; for points in the medium \(Q^2\) bins, the number of input measurements is as much as 7. The phase-space region of the combined cross sections is determined as
Extrapolation and corrections
The results of the inclusive lifetime analysis (dataset 1) were directly taken from the original measurement in the form of \(\sigma _\mathrm{red}^{c\bar{c}} \). For all other measurements the inputs to the combination were visible cross sections, \(\sigma _\mathrm{vis, bin}\), defined as the D-, \(\mu \)- or jet-production cross sections in a particular \(p_T\) and \(\eta \) range, in bins of \(Q^2\) and y or x.
The reduced cross sections \(\sigma _\mathrm{red}^{c\bar{c}} \)were obtained from the visible cross sections \(\sigma _\mathrm{vis, bin}\) measured in a limited phase-space region using theoretical predictions according to the procedure described in Sect. 6.2.3: the reduced charm cross section at a reference (\(x, Q^2\)) point is given by
To calculate \(\sigma _\mathrm{red}^{c\bar{c}, \mathrm{th}}(x,Q^2)\) and the visible cross sections \(\sigma ^\mathrm{th}_\mathrm{vis, bin}\), the NLO QCD FFNS theory set-up was used, consistent with the previous ‘HERA 2012’ combination.Footnote 47 This set-up is almost identical to the one described in Sect. 6.3, except for the following minor changes:
-
1.
in the fragmentation process, calculation of the hadron energy and Lorentz boost were performed by using the mass of the c quark rather than the charmed hadron;Footnote 48
-
2.
if it needed to be subtracted, the beauty contribution was evaluated using the estimates of the corresponding publications (based on MC renormalised to data).
The extrapolation factors, \(R=\sigma ^\mathrm{th}_\mathrm{bin} / \sigma ^\mathrm{th}_\mathrm{vis, bin}\), where \(\sigma ^\mathrm{th}_\mathrm{bin}\) is the cross section in the full (\(p_T\), \(\eta \)) phase-space region, vary in a wide range: from \(R \gtrsim 1\) at high \(Q^2\) to \(R \sim 5\) at low \(Q^2\). For dataset 5 the extrapolation procedure includes also the centre-of-mass energy correction.
The extrapolation uncertainties were estimated from the variations described in Sect. 6.3, and were treated as correlated between datasets 2–11.Footnote 49 For dataset 1 the extrapolation uncertainties (except for the longitudinal fragmentation) do not appear explicitly and were covered by the experimental systematic uncertainties. The dominant contributions arise from the variation of the renormalisation and factorisation scales (average 5–6%, reaching \(15\%\) at lowest \(Q^2\)) and from the variation of the fragmentation function (average 3–5%).
Prior to the combination, datasets 1 and 11 were corrected, when needed, from the grids used in the original publications to the common grid using the NLO FFNS calculation. The corrections were always smaller than \(25\%\) and the associated uncertainties, obtained by varying the charm mass, the scales and the PDFs, were negligible. All D-meson cross sections were updated using the most recent branching ratios [199].
6.5.2 Combined charm cross sections
In total, 209 measurements were combined to 52 reduced cross-section measurements. The combination has \(\chi ^{2}/n_{\text {dof}} =117/157\); the corresponding probability is \(99.3\%\), indicating conservative estimation of the experimental systematic uncertainties of the input measurements. The pull distribution is shown in Fig. 42.
The values of the combined cross section \(\sigma _\mathrm{red}^{c\bar{c}} \)together with uncorrelated, correlated and total uncertainties are given in Table 13. A detailed breakdown of the correlated uncertainties is provided in Appendix D (Table 21).
The individual datasets as well as the results of the combination are shown in Fig. 43.Footnote 50 The combined cross sections exhibit significantly reduced uncertainties. The input H1 and ZEUS data in total are similar in precision and contribute roughly equally to the averaged results. The combined data are significantly more precise than any of the individual input datasets. The uncertainty of the combined results is about \(8\%\) on average and reaches \(4\%\) in the region of small x and medium \(Q^2\). This is an improvement of about a factor of 2.5 with respect to each of the most precise datasets in the combination.
There are in total 78 sources of correlated systematic uncertainty, including global normalisations, characterising the separate datasets. The shifts and the reduction of the correlated uncertainties are provided in Appendix D (Table 20). None of these shifts exceeds 1.3 standard deviation. The influence of several correlated systematic uncertainties was reduced by more than a factor of two, while on average the reduction factors are about 20% of the nominal standard deviation. The reductions are due to the different charm-tagging methods, and to the requirement that different measurements probe the same cross section at each (\(x,Q^2\)) point. The reduction of systematic uncertainties propagated to the other average points, including those which are based solely on the less precise measurements. Due to this propagation the uncertainty on the combined data in the points, to which only one input measurement contributes, was also reduced compared with the original one.
Comparison with previous combination
Comparing \(\chi ^{2}/n_{\text {dof}} =117/157\) to the ‘HERA 2012’ result, \(\chi ^{2}/n_{\text {dof}} =62/103\), the individual contributions from the newly included measurements are 11/14, 30/31 and 18/18 for datasets 9, 10 and 11, respectively, and the total contribution from all three datasets is 59/63, thus the new measurements are consistent.
The combined data are compared to the ‘HERA 2012’ results in Fig. 44; for a more detailed comparison Fig. 45 shows the same results normalised to the ‘HERA 2012’ and Fig. 46 shows the comparison of the relative uncertainties. The new results are consistent with the previously published ones, although on average they lie slightly above. This is explained by taking into account the changes in the shifts of correlated systematic uncertainties, which affect all points simultaneously (mainly the theory-related sources and luminosity uncertainties; see Table 20 in Appendix D).
The new combined cross sections exhibit reduced uncertainties. Typically, the reduction of the uncorrelated and correlated uncertainties contribute about equally to the total improvement. At medium \(Q^2\), where new datasets 9, 10 and 11 contribute directly, the improvement is on average of the order of 20% of the ‘HERA 2012’ uncertainties, reaching 35% in several points, and in the low and very high \(Q^2\) bins the improvement is 5–15% owing to the reduction of the correlated uncertainties only.
6.5.3 Comparison to theoretical predictions and QCD analysis
Figure 47 presents a comparison of the NLO QCD predictions in the FFNS, calculated as described in Sect. 6.3, to the combined data. This is more clearly seen in the ratio to the theoretical predictions, shown in Fig. 48. The predictions describe the data well within the uncertainties in the whole kinematic range of the combination, although the central theoretical curve underestimates the data normalisation, as observed also in the combination of the \(D^{*+}\) cross sections (Sect. 6.4). The ‘customised’ NLO calculation (Sect. 6.4.1), while it was determined mainly from the exclusive \(D^{*+}\) quantities in the restricted phase-space region, provides an improved description of the reduced cross-section normalisation, although it does not improve the description of the x shape.
In Fig. 49 the data are compared to the predictions by the ABM group in the FFNS at NLO and NNLO, based on the running-mass scheme [28, 226]. The uncertainties on the predictions include the uncertainties on the charm mass, which dominate at small \(Q^2\). The predictions at NLO and NNLO are very similar and describe the data well in the whole kinematic range of the measurement.
The sensitivity of the theoretical predictions to the charm mass allows for the determination of its best value from the data in a QCD fit. The analysis was performed with the HERAFitter program [227, 228], which is based on the NLO DGLAP evolution scheme [41,42,43,44,45,46,47] as implemented in QCDNUM [13]. The strategy of the HERAPDF1.0 fit [2, 60] was followed. The combined H1 and ZEUS inclusive ep NC and CC DIS cross sections [2] were used to constrain the PDFs. The analysis was restricted to the inclusive data with \(Q^2>Q^2_\mathrm{min}=3.5\) GeV\(^2\) to ensure the applicability of pQCD calculations; for the charm data this cut was not applied.Footnote 51 Theoretical predictions were obtained at NLO using the ‘FF ABM’ and ‘FF ABM RUNM’ scheme for the heavy-quark pole- and running-mass treatment, respectively, as implemented in OPENQCDRAD [229]. The factorisation and renormalisation scales were set to \(\mu _f=\mu _r=Q\) for the light quarks and to \(\mu _f=\mu _r=\sqrt{Q^2+4m_Q^2}\) for the heavy quarks. The number of active flavours in PDFs and \(\alpha _s\) evolution was set to \(n_f=3\). The strong coupling constant was set to \(\alpha _s^{n_f=3}(M_Z)=0.105\), corresponding to the value \(\alpha _s^{n_f=5}(M_Z) = 0.116\). The beauty mass was set to \(m_b^\mathrm{pole}={4.75}~\mathrm{GeV}\) and \(m_b(m_b)={4.18}~\mathrm{GeV}\) [199] for the pole- and running-mass treatments, respectively.Footnote 52
The following combinations of PDFs were chosen in the fit procedure at the initial scale of the QCD evolution \(Q^2_0= 1.4\) GeV\(^2\): the valence-quark distributions \(xu_{{v}}(x)\), \(xd_{{v}}(x)\), the gluon distribution xg(x) and the u-type and d-type antiquark distributions (note that they are identical to the sea-quark distributions), \(x\overline{{U}}(x)\), \(x\overline{{D}}(x)\), where \(x\overline{{U}}(x) = x\overline{u}(x)\) and \(x\overline{{D}}(x) = x\overline{d}(x) + x\overline{s}(x)\). At the scale \(Q_0\), the PDFs are parametrised by
The normalisation parameters \(A_{u_{\text {v}}}\), \(A_{d_\text {v}}\), \(A_g\) were determined by the QCD sum rules, the B parameters determine the PDFs at small x, and the C parameters describe the shape of the distributions as \(x \rightarrow 1\). A flexible form for the gluon distribution was adopted with the choice of \(C'_g=25\) motivated by the approach of the MSTW group [21, 230]. The s-quark distribution is expressed as x-independent strangeness fraction, \(f_s\), of the d-type sea, \(x\overline{s} = f_sx\overline{D}\) at \(Q^2_0\), where \(f_s=0.31\) as in the analysis of [230]. Additional constraints \(B_{\overline{\text {U}}} = B_{\overline{\text {D}}}\) and \(A_{\overline{\text {U}}} = A_{\overline{\text {D}}}(1 - f_s)\) were imposed, with \(x\bar{u} \rightarrow x\bar{d}\) as \(x \rightarrow 0\). The parameters \(D_{u_v}\), \(D_{\bar{U}}\) and \(D_{\bar{D}}\) were set to 0 for the nominal variant of the fit. In a compact way, these constraints can be summarised as
The analysis was performed by fitting the remaining 13 free parameters in (6.15).Footnote 53 The charm mass was left free in the fit.
The free parameters are determined in HERAFitter by minimisation of a \(\chi ^2\)-function as implemented in the MINUIT package [200]. The \(\chi ^2\) function is similar to that described in Sect. 6.2.1
where the notation is equivalent to that in Eq. (6.6). The parameters \(m_i\) are theoretical predictions which depend on the fitted parameters. Systematic uncertainties are assumed to be proportional to the central prediction values, whereas statistical uncertainties scale with the square root of the predictions. Correlated uncertainties are treated using nuisance-parameter representation [228]. The \(\chi ^2\)-function includes an additional logarithmic term which is relevant when the estimated statistical and uncorrelated systematic uncertainties of the data are rescaled during the fit [231].
The uncertainties were evaluated following the strategy of [2, 60]. These include:
-
the fit uncertainty was evaluated [214, 228, 232, 233] from a \(\chi ^2\) variation of 1;Footnote 54
-
the model uncertainties from variation of theory model parameters:
-
\(f_s\) was varied in the range \(0.23<f_s<0.38\);
-
\(m_b^\mathrm{pole}\) and \(m_b(m_b)\) were varied in the ranges \(4.5<m_b^\mathrm{pole}<{5.0}~\mathrm{GeV}\) and \(4.0<m_b(m_b)<{4.4}~\mathrm{GeV}\) for the pole- and running-mass treatments, respectively;
-
\(Q^2_\mathrm{min}\) was varied in the range \(2.5<Q^2_\mathrm{min}<{5.0}~{\mathrm{GeV}^2}\);
-
\(\alpha _s^{n_f=3}(M_Z)\) was varied in the range \(0.103<\alpha _s^{n_f=3}(M_Z)<0.107\), corresponding to \(0.114<\alpha _s^{n_f=5}(M_Z)<0.118\);
-
\(\mu _f\) and \(\mu _r\) for heavy-flavour production were varied simultaneously by a factor of two (the framework allows only their simultaneous variation); the largest differences in this range were taken;
-
the parametrisation uncertainties:
-
\(Q^2_0\) was varied in the range \(1.0<Q^2_0<{1.9}~{\mathrm{GeV}^2}\);
-
the parameter \(D_{u_v}\) was released;Footnote 55
-
the parameter \(D_{\overline{U}}\) was released;
-
the parameter \(D_{\overline{D}}\) was released.
The fitted values of the pole and running charm masses are
For the model uncertainties the \(f_s\), \(m_b\) and \(Q^2_\mathrm{min}\) variations were added in quadrature, while the \(\alpha _s\) and scale uncertainties are quoted separately. For the parametrisation uncertainties, the largest differences of all variations was taken. The \(\chi ^{2}/n_{\text {dof}}\) values are \(\chi ^{2}/n_{\text {dof}} =656/630\) and \(\chi ^{2}/n_{\text {dof}} =653/630\) for the pole- and running-mass treatments, respectively; the partial contribution from the combined charm data is \(\chi ^{2}/n_{\text {dof}} =66/52\) in both fits. These values indicate a good consistency of the fit, although they are slightly larger than obtained in the previous analysis [60] with the ‘HERA 2012’ combined data (total \(\chi ^{2}/n_{\text {dof}} =628/626\) and charm \(\chi ^{2}/n_{\text {dof}} =44/47\) for the running-mass treatment). This might indicate that the more precise charm data require a somewhat more flexible PDF parametrisation.
The determined \(m_c(m_c)\) value is consistent with the ‘HERA 2012’ result \(m_c(m_c)=1.26~\pm 0.05\mathrm{(fit)} ~\pm 0.03\mathrm{(mod)} ~\pm 0.02\mathrm{(par)} ~\pm 0.02({\alpha _s})\) GeV and has a better accuracy owing to the more precise combined charm data used in the fit and to the usage of all \(Q^2\) bins.Footnote 56 The improvement of the model, \(\alpha _s\) and scale uncertainties is attributed partially to the usage of all \(Q^2\) bins and partially to better constraints on the gluon distribution coming from more accurate charm data, which stabilise the fit results against variations of external parameters. This value is in agreement with the other analyses of the ‘HERA 2012’ charm data performed at NLO and partial NNLO [234, 235]:Footnote 57
Some differences between the results are attributed to different theoretical settings and procedures of uncertainty estimation (for more details see [234, 235] and the references therein). The \(m_c(m_c)\) value is also consistent with the world average of \(m_c(m_c)=1.275\pm 0.025\) GeV [199] defined at two-loop QCD, based on lattice calculations and measurements of time-like processes.
Finally, note that the fitted running-mass value \(m_c(m_c)={1.225}~\mathrm{GeV}\) corresponds to \(m_c^\mathrm{pole}=m_c(m_c)(1+4\alpha _s(m_c)/3\pi )={1.417}~\mathrm{GeV}\), calculated using the appropriate one-loop relation (2.4), which is consisted with the fitted value for \(m_c^\mathrm{pole}={1.334}~\mathrm{GeV}\), but the latter differs significantly from the world-average pole mass \(m_c^\mathrm{pole}=1.67 \pm {0.07}~\mathrm{GeV}\) [199], calculated from the world-average running mass using the two-loop relation. This illustrates one of the possible caveats in the determination and usage of the pole mass in applications of pQCD, mentioned in Sect. 2.3. Since no attempt has been made to estimate the non-perturbative theoretical uncertainty on \(m_c^\mathrm{pole}\), the presented result should not be considered as a measurement, but rather as extraction of the value, which is optimal for these particular data. In order to show alternative ways to calculate predictions for charm production, Appendix D.2 presents a comparison with the theoretical predictions in different VFNS and a determination of optimal c-quark mass parameters for these schemes.
6.6 Summary
Measurements of charm production by the H1 and ZEUS experiments were combined. The combination was done separately for the single- and double-differential visible \(D^{*+}\) cross sections, and for all available measurements of open charm production extrapolated to the full phase space. The combination was performed in the kinematic region \(1.5<Q^2<{1000}~{\mathrm{GeV}^2}\) (\(5<Q^2<{1000}~{\mathrm{GeV}^2}\) for the single-differential cross sections), \(0.02<y<0.7\), \(p_T(D^{*+})>{1.5}~\mathrm{GeV}\) and \(|\eta (D^{*+})|<1.5\) for the visible \(D^{*+}\) cross sections, and in the region \(2.5 \le Q^2 \le {2000}~{\mathrm{GeV}^2}\) and \(3 \times 10^{-5}\le x \le 5 \times 10^{-2}\) for the reduced charm cross sections. The procedure takes into account detailed information on correlations of the systematic uncertainties. For both combinations, the data were found to be consistent, and the combined sets exhibit significantly reduced uncertainties. The combination of visible \(D^{*+}\) cross sections does not induce significant theory-related uncertainties, while the combination of the reduced charm cross sections presents the most precise charm dataset from HERA, however is affected by the theory-related uncertainties in the extrapolation procedure.
For the visible \(D^{*+}\) cross sections, the combination was performed separately for the single-differential cross sections using the HERA-II data only, and for the double-differential cross section using the HERA-I and HERA-II data. Inclusion of the HERA-I data allowed an extension of the kinematic region in \(Q^2\). NLO QCD predictions in the FFNS were compared to the combined \(D^{*+}\) data. The predictions describe the data well within their uncertainties. Because the uncertainties of the combined data are smaller than the theoretical uncertainties, higher-order calculations and an improved treatment of the fragmentation process is needed to reduce the theory uncertainty to a level comparable to the data precision. The \(D^{*+}\) combined data can be used further as the most precise purely experimental charm measurement from HERA for tests of pQCD and phenomenological approaches, e.g. of the fragmentation process.
The combined reduced charm cross sections are consistent with the previous H1 and ZEUS charm combination and have an improved precision owing to the inclusion of new ZEUS measurements. The combined data were compared to NLO QCD predictions in the FFNS and various VFNS. Most of the predictions describe the data well within their uncertainties. Similar to the \(D^{*+}\) combination, the uncertainties of the combined data are smaller than the theoretical uncertainties, thus further improvement in the theoretical calculations is required to match the data precision. The best description of the data in the whole kinematic range is provided by the approximate NNLO FFNS predictions of the ABM group. The combined reduced charm cross sections were also used as input for the QCD analysis to determine the optimal values of the \(\overline{\mathrm{MS}}\) running charm mass and c-quark mass parameters in different VFNS. The extracted value of the \(\overline{\mathrm{MS}}\) running charm mass is consistent with the world-average value and has competitive precision to other individual determinations in pQCD. These data can be used further as the most precise inclusive charm measurement from HERA for tests of pQCD and in QCD analyses to constrain the gluon distribution and to determine the c-quark mass.
7 Heavy-flavour production at LHCb
This section provides an overview of measurements of heavy-flavour production at the LHCb experiment. This overview is restricted to the selected measurements that are used for the QCD analysis presented in Sect. 8, and describes their comparison to theoretical predictions, including a discussion of the theoretical uncertainties.
7.1 Introduction
As outlined in Sect. 2.4.2, PDFs are a necessary ingredient for QCD predictions in any process with incoming hadrons. Since they are not currently calculable from first principles, they must be extracted from data. At the present time several groups determine PDFs (for latest results see, e.g. [1, 236,237,238,239,240,241], and for a recent review see [242, 243]).
In Fig. 50 the gluon distributions from several PDF sets [219, 220, 244, 245] are compared at the scale \(Q^2={10}~{\mathrm{GeV}^2}\).Footnote 58 The FFNS variants of the fits with the number of active flavours \(n_f=3\) were chosen. While being consistent with each other and well constrained in the region of medium x, the distributions have a significant spread between the central values and also large uncertainties in the low-x region,Footnote 59 since presently no data constraining gluons in this region are included in the PDF fits. Note also that within the uncertainty bands, some of the sets predict a negative gluon distribution in the region \(x \lesssim 5 \times 10^{-5}\). This comparison illustrates that, in spite of using similar input data, depending on the assumptions made for a PDF extraction and the methods used to estimate the uncertainties a variety of predictions in the unmeasured region exist and this demonstrates the need of further experimental input.
Such data exist from the LHCb Collaboration, which has measured charm and beauty production in the forward-rapidity region \(2.0<y<4.5\) at the centre-of-mass energy \(\sqrt{s}={7}~\mathrm{TeV}\) [177, 247].Footnote 60 The measured quantities are one-particle inclusive charm- and beauty-hadron production cross sections in the \(p_T\) ranges \(0<p_T<{8}~\mathrm{GeV}\) and \(0<p_T<{40}~\mathrm{GeV}\) for the charm and beauty measurements, respectively. Since the dominant process for heavy-flavour production in \(pp\) collisions at these energies is gluon–gluon fusion (see Sect. 2.5), these data are sensitive to gluons at low x. Indeed, the x-range can be estimated (neglecting quark-to-hadron fragmentation effects) using the LO formulae of Eq. (2.17). For given values of \(p_T\) and y, e.g. \(y_1\) in Eq. (2.17), of one of the produced heavy quarks, the probed ranges of the two proton momentum fractions \(x_1\) and \(x_2\) are:
For the other momentum fraction \(x_1\) the range is \(\frac{\mathrm{e}^{y_1}}{\epsilon - \mathrm{e}^{-{y_1}}} \le x_1 \le 1\). Thus the lowest x values probed by the LHCb charm data are \(x \approx {\mathrm{e}^{-4.5}}/{(7000/1.4 - \mathrm{e}^{4.5})} \approx 2 \times 10^{-6}\). Equation (2.19) shows that the cross section is suppressed when \(|y_{1}-y_{2}|\) becomes large, implying that the quark and antiquark tend to be produced with the same rapidity. Assuming \(y_1=y_2=y\) (\(p_z=0\) of the produced heavy quark in the parton rest frame) in Eq. (2.17), the probed ranges of \(x_1\) and \(x_2\) become
This estimation gives the lowest x values probed by the LHCb charm data \(x \approx 2e^{-4.5} \times {1.4}/{7000} \approx 4 \times 10^{-6}\). The low-x data in the LHCb experiment provide new information to pin down the gluons in the region unconstrained by HERA. The corresponding LO theoretical predictions can be obtained by using Eq. (2.19) (Sect. 2.5) and integrating over the rapidity of the unmeasured produced heavy quark over its kinematically allowed range \(-\mathrm{ln}(\epsilon - \mathrm{e}^{-y_1}) \le y_2 \le \mathrm{ln}(\epsilon - \mathrm{e}^{y_1})\). The actually effective \((x_1,x_2)\) region probed by these data is presented in Sect. 7.3.2 using NLO calculations.
In Fig. 51 the kinematic regions which are covered by different HERA and LHCb data are plotted. The precise HERA DIS data [2] are only indirectly sensitive to gluons, so they constrain the gluon distribution well only in the region \(10^{-3} \lesssim x \lesssim 10^{-1}\). The HERA heavy-flavour data [30, 60] cover the region \(10^{-4} \lesssim x \lesssim 10^{-2}\), while the LHCb data extend the coverage up to \(x \lesssim 5 \times 10^{-6}\) (low-\(p_T\) forward charm) and up to \(x \lesssim 1\) (high-\(p_T\) forward beauty).Footnote 61 Note that the LHCb data are sensitive to the product of gluon densities in two non-overlapping regions: forward and medium; since the latter is already well constrained by other data, the LHCb data will have an impact mainly on the low-x region. It is worth noting that using PDFs with a strongly negative values of the gluon distribution at low x results in negative and thus unphysical predicted cross sections for the forward region of the LHCb charm data. This emphasises the inclusion of the LHCb data in a PDF fit to constrain gluons at low x.
7.2 Measurements of charm and beauty production at LHCb
The large hadron collider (LHC) is the world’s largest and most powerful particle collider; its description can be found elsewhere [255]. The LHCb detector at the LHC provides unique information to the forward-rapidity region with a detector that is tailored for flavour physics, therefore LHCb heavy-flavour data provide a unique access to the gluon distribution in the proton at very low values of the partonic momentum fraction x. In this review LHCb data published up to August 2014 are included.
The LHCb detector [256] (Fig. 52) is a single-arm forward spectrometer covering the pseudorapidity range \(2<\eta <5\), designed for the study of particles containing b or c quarks. The right-handed coordinate system adopted has the Z axis along the beam. The detector has a high-precision tracking system consisting of a silicon-strip vertex detector surrounding the \(pp\) interaction region, a large-area silicon-strip detector located upstream of a dipole magnet with a bending power of about \({4}~\mathrm{Tm}\), and three stations of silicon-strip detectors and straw drift-tubes placed downstream. The combined tracking system has a momentum resolution (\(\delta p/p\)) that varies from 0.4% at \({5}~\mathrm{GeV}\) to 0.6% at \({100}~\mathrm{GeV}\) and an impact-parameter resolution of \({20}~\upmu \)m for tracks with high transverse momentum. Charged hadrons are identified using two ring-imaging Cherenkov detectors (RICH). The RICH system [257] of the LHCb experiment provides charged-particle identification over a wide momentum range, from 2 to \({100}~\mathrm{GeV}\).Footnote 62 It consists of two RICH detectors that cover between them the angular acceptance of the experiment, 15–\({300}~\mathrm{mrad}\) with respect to the beam axis. Photon, electron, and hadron candidates are identified by a calorimeter system consisting of scintillating-pad and pre-shower detectors, an electromagnetic calorimeter, and a hadronic calorimeter. Muons are identified by a system composed of alternating layers of iron and multi-wire proportional chambers.
7.2.1 Measurement of prompt charm production
LHCb measured \(D^0\), \(D^{+}\), \(D_s^{+}\), \(D^{*+} \) and \(\varLambda _c^{+}\) production using data corresponding to an integrated luminosity of \({15}~{\mathrm{nb}^{-1}}\) in the region of rapidity \(2.0< y < 4.5\) and transverse momentum \(0<p_T<{8}~\mathrm{GeV}\) in \(pp\) collisions at a centre-of-mass energy of \({7}~\mathrm{TeV}\) [177]. The analysis was based on fully reconstructed decays of charmed hadrons in the following decay modes (Fig. 53): \(D^0 \rightarrow K^{-}\pi ^{+}\), \(D^{+} \rightarrow K^{-}\pi ^{+}\pi ^{+}\), \(D^{*+} \rightarrow D^0(K^{-}\pi ^{+})\pi ^{+}\), \(D_s^{+} \rightarrow \phi (K^{-}K^{+})\pi ^{+}\) and \(\varLambda _c^{+} \rightarrow pK^{-}\pi ^{+}\).
Charmed hadrons may be produced at the \(pp\) collision point either directly or as feed-down from the instantaneous decays of excited resonances. They may also arise in decays of beauty hadrons. The first two sources (direct production and feed-down) are referred to as prompt. Charmed particles from beauty-hadron decays are called secondary charmed hadrons. The result of the measurement is reported as the production cross sections of prompt charmed hadrons; secondary charmed hadrons were treated as background. The measurement was performed in two-dimensional bins of \(p_T\) and y. For the \(\varLambda _c^{+}\) measurement, only single-differential cross sections as a function of \(p_T\) and y were measured. The prompt signal yields were selected using multi-dimensional extended maximum likelihood fits to the mass and \(\log _{10}(\mathrm{IP}~\chi ^{2})\), where \(\mathrm{IP}~\chi ^{2} \) is defined as the difference between the \(\chi ^{2}\) of the primary vertex, reconstructed with and without the considered particle [177] (Fig. 53). The dominant systematic uncertainty is the uncertainty on the tracking efficiency, which is 3–4% per one final-state track, thus resulting in 6–10% for the measured cross sections.
The measured double-differential cross sections of \(D^0\), \(D^{+}\), \(D_s^{+}\) and \(D^{*+} \) production are shown in Fig. 54 and compared to the theoretical predictions as provided by external groups at NLO in the FONLL [101, 103, 209, 258] and other GM-VFNS approach [259,260,261,262,263,264] (see Sects. 2.5.2 and 2.5.3). The GM-VFNS predictions are shown for \(p_T>{3}~\mathrm{GeV}\). Predictions for \(D^0\) mesons are also compared with the GM-VFNS calculations using PDFs with intrinsic charm [24]. As shown in Fig. 54, in the phase space of the present measurement the effect of intrinsic charm is predicted to be small. All theoretical calculations describe the data well, although their uncertainties of the order of a factor 2 significantly exceed the experimental uncertainties of the data.
7.2.2 Measurement of beauty production
LHCb measured \(B^{+}\), \(B^{0}\) and \(B_s^{0}\) production using data corresponding to an integrated luminosity of \({0.36}~{\mathrm{fb}^{-1}}\) in the region of rapidity \(2.0< y < 4.5\) and transverse momentum \(0<p_T<{40}~\mathrm{GeV}\) in \(pp\) collisions at a centre-of-mass energy of \({7}~\mathrm{TeV}\) [247]. The analysis was based on fully reconstructed decays of beauty hadrons in the following decay modes: \(B^{+} \rightarrow J/\psi K^{+}\), \(B^{0} \rightarrow J/\psi K^{*0}\) and \(B_s^{0} \rightarrow J/\psi \phi \), with \(J/\psi \rightarrow \mu ^{+}\mu ^{-}\), \(K^{*0} \rightarrow K^{+}\pi ^{-}\) and \(\phi \rightarrow K^{+}K^{-}\). Similar to the case of the charm measurement [177], also the beauty measurement was performed in two-dimensional bins of \(p_T\) and y.
The mass distributions of the selected candidates for one of the \(p_T\) and y bins are shown in Fig. 55. The dominant systematic uncertainty comes from the tracking (2–\(9\%\)) and trigger (2–\(8\%\)) efficiencies and finite size of the bins (0–\(19\%\)); for \(B^0\) and \(B_s^0\) the branching-ratio uncertainties are also sizeable (\(\approx \)10%).
The measured cross sections, integrated over \(p_T\) and y, are compared to the FONLL theoretical predictions in Fig. 56 and 57, respectively. Similar to the results of the charm measurement [177], the FONLL calculations describe the data well, albeit within large uncertainties.
7.3 Comparison with theoretical predictions
Theoretical predictions for the charm and beauty data were obtained using the massive NLO \(O(\alpha _s^3)\) calculations in the FFNS [90, 92, 96] (see Sect. 2.5.1) using the MNR code [98], implemented in the HERAFitter package [227, 228] for this purpose. Technical details of the implementation are described in Appendix E.1. The parameters used in the calculations and the corresponding variations used to estimate the uncertainties are described below in Sect. 7.3.1.
7.3.1 Details of MNR calculations
Parton-level cross sections
The parton-level cross sections were calculated using the one-particle inclusive option of the MNR calculations [92] with the following settings:
-
The factorisation and renormalisation scales were parametrised as \(\mu _f{=}A^c_f\sqrt{p_T^2+m_c^2}\), \(\mu _r{=}A^c_r\sqrt{p_T^2+m_c^2}\) for charm production and similarly \(\mu _f=A^b_f\sqrt{p_T^2+m_b^2}\), \(\mu _r=A^b_r\sqrt{p_T^2+m_b^2}\) for beauty, where \(m_c\) and \(m_b\) refer to the c- and b-quark pole masses, respectively. The conventional choice for the coefficients \(A^{c,b}_{f,r}\) is \(A^c_f=A^b_f=A^c_r=A^b_r=1\) and the variations within the range [0.5; 2] (independently or simultaneously). Since the scale dependence of the predictions is of the order of a factor of 2 (see Fig. 6 in Sect. 2.5.1), the choice of the coefficients \(A^{c,b}_{f,r}\) is crucial for a reliable data description and has to be carefully studied; the explicit details are given in Sect. 8.1.
-
The pole mass of the c and b quarks were set to \(m_c = 1.4\) GeV, \(m_b = 4.5\) GeV, or left free in the fit.
-
The strong coupling constant \(\alpha _s^{n_f=3}(M_Z) = 0.1059 \pm 0.0005\), corresponding to the PDG value \(\alpha _s^{n_f=5}(M_Z) = 0.1185 \pm 0.0006\) [199].
-
The PDFs were 3-flavour FFNS variants of HERAPDF1.0 [2] or other global PDF groups, as specified later, or left free in the fit.
Fragmentation
Non-perturbative fragmentation functions for charm and beauty were extracted from \(e^{+}e^{-}\) and \(ep\) data (see, e.g. [122, 208, 209, 225, 265]). So far no fragmentation measurements were done in \(pp\) collisions. Universality of the fragmentation is often assumed; however, it holds only if the perturbative part of the calculations is the same (see Sect. 2.6). Moreover, e.g. in [122] the fragmentation-function parameters were shown to be different for two different kinematic regions.
Since the kinematic region of the LHCb charm measurement is close to the HERA region where measurements were done by H1 [122] and ZEUS [208], the Kartvelishvili function [118] with \(\alpha _k=4.4 \pm 1.7\) was used for the charm fragmentation, which covers the spread of the measurements [122, 208]. The fragmentation was performed in the laboratory frame by rescaling the quark three-momentum, then the energy of the produced hadron was calculated using the hadron mass. The prescription for the fragmentation described above was used for \(D^{*+} \), \(D_s^{+}\) mesons and \(\varLambda _c^{+}\) hadrons, while for \(D^0\) and \(D^{+}\) mesons the contribution from \(D^{*+}\) and \(D^{*0}\) mesons was treated as described in [258]. For beauty no fragmentation measurements at HERA exist; therefore the value \(\alpha _k=11 \pm 4\) was used, extracted from measurements at LEP [225]. All beauty hadrons were treated equally. The fragmentation fractions for charmed hadrons were taken from [211]. Their values are consistent with the recent determination from ee, ep and pp data [266]. The fragmentation fractions for beauty hadrons are taken from [247].
7.3.2 Kinematics of low-\(p_T\) region
The dominant channel for heavy-flavour production at LHC is \(gg \rightarrow Q\bar{Q}\) (see Fig. 59, left). Fig. 58 shows the two-dimensional x distribution of the two incoming gluons, as predicted for the LHCb data by the calculations described above. This more complete evaluation confirms qualitatively the rough LO estimation (see Fig. 51): the main contribution comes from the two separated regions \(x_1 \approx 10^{-4.5}\), \(x_2 \approx 10^{-1.5}\) for charm and \(x_1 \approx 10^{-4.0}\), \(x_2 \approx 10^{-1.2}\) for beauty; although for charm an additional concentrated region is observed at \(x_1 \approx x_2 \approx 10^{-2.0}\)–\(10^{-1.5}\). The enhancement at medium x comes from a class of \(O(\alpha _s^3)\) corrections, given by the flavour-excitation diagrams (an example is given in Fig. 59, right), which can be thought of as initial-state gluon-splitting processes [80]. The relevant region of the phase space in this case is the one with the heavy-quark propagator close to the mass shell (the low-\(p_T\) region). In GM-VFNS approaches these effects are reabsorbed in the evolution of the PDFs by defining a heavy-quark density inside a proton. The inclusion of the \(gQ \rightarrow gQ\) process allows accounting for the higher-order effects in the evolution equations, while the inclusion of the NLO flavour-excitation diagrams reproduces instead more faithfully the exact kinematics and correlations of the flavour-creation process in the region close to the threshold [80].
The corrections from the flavour-excitation diagrams should in no way be thought of as a problem of the FFNS calculations, but rather as an important correction to the LO kinematics of the process. In order to demonstrate this, Fig. 60 shows the median of the centre-of-mass energy in the parton–parton rest frame, \(\sqrt{\hat{s}}\), vs. transverse momentum and rapidity of the heavy quark for the charm and beauty LHCb data. While in the case of beauty, the \(\sqrt{\hat{s}}\) median smoothly increases with increasing \(p_T\) almost independently of y, for charm in the threshold region \(0 < p_T \lesssim {2}~\mathrm{GeV}\) a strong increase of the \(\sqrt{\hat{s}}\) median with increasing y is observed. This increase is correlated with the concentrated region at medium x in Fig. 58. The results shown in Figs. 58 and 60 indicate that the statement about the sensitivity of charm production at low \(p_T\) and forward y to the low-x gluon region should be taken with some caution: in fact, about 50% of contribution in the corner region \(p_T \lesssim {2}~\mathrm{GeV}\), \(y \gtrsim 3.5 \) does not come from low-x gluons; instead it comes from the medium-x region, and this particular contribution is described in the \(O(\alpha _s^3)\) calculations at LO.
7.3.3 Comparison to FONLL calculations
As mentioned in Sect. 2.5, one of the state-of-the-art calculations for heavy-flavour production in hadron collisions is the FONLL approach [101]. Let us briefly recall that the FONLL approach merges the massive NLO calculations (MNR) with massless ones using a phenomenologically chosen matching function. Owing to resummation of the NLL part the FONLL calculations are expected to have improved convergence of the perturbative expansion at high \(p_T\).
In Fig. 61 the NLO predictions obtained with MNR as described in Sect. 7.3.1 are compared with the FONLL ones obtained using the public web interface [104]Footnote 63 for parton-level charm and beauty cross sections at LHCb. For the relevant regions of transverse momentum in the charm and beauty data, \(0<p_T(c) \lesssim {8}~\mathrm{GeV}\), \(0<p_T(b) \lesssim {40}~\mathrm{GeV}\) Footnote 64 the maximum deviations of the order of 20% in the region \(p_T \approx 3m_Q \) are observed. Note that these changes are well within the uncertainties from the scale variations.
It is also instructive to look at Fig. 7 (Sect. 2.5.2), taken from the original FONLL paper [101], which shows the bands obtained from the scale variations for the NLO and FONLL calculations for beauty production at the Tevatron. The behaviour of the bands in Fig. 7 is very similar to the change of the central values shown in Fig. 61. Note that in Fig. 7 a significant reduction of the uncertainty band starts only at \(p_T \gtrsim {40}~\mathrm{GeV}\). Since the considered \(p_T\) ranges of the LHCb data are not the high-\(p_T\) region where the effects of the FONLL calculations become relevant, the usage of the NLO FFNS calculations as one of the currently best available theories for the LHCb kinematic region in the present study is justified.Footnote 65
7.3.4 Predictions based on PDFs from HERA
In Fig. 62 (left) the measured \(D^0\) cross sections [177] are compared to the NLO predictions.Footnote 66 For these calculations the FFNS variant of the HERAPDF1.0 set [2] was used, when charm is treated as massive and does not present in the proton at all energy scales. The factorisation and renormalisation scale were set to \(\mu _f=\mu _r=\sqrt{m_Q^2+p_T^2}\) and varied independently up and down by a factor of 2, and the heavy-quark masses chosen to be \(m_c={1.4 \pm 0.15}~\mathrm{GeV}\), \(m_b={4.50 \pm 0.25}~\mathrm{GeV}\). The fragmentation functions were chosen and their uncertainties evaluated as described in Sect. 7.3.1. The theoretical uncertainties denoted ‘MNR’ in Fig. 62 include uncertainties from scale, heavy-quark mass and fragmentation function variations, while the total theoretical uncertainties include also those arising from the PDFs. The latter are dominant in the lowest \(p_T\) bin \(0<p_T<1\) GeV, as well as in the next one \(1<p_T<2\) GeV for the highest y values \(3.5<y<4.5\). Although the ‘MNR’ uncertainties are of the order of factor \(\gtrsim 2\) and exceed experimental data uncertainties in all bins. In overall, the predictions based on PDFs from HERA describe the LHCb data well within very large theoretical uncertainties. The right-hand side of Fig. 62 shows the same measurement, but normalised in y: each cross section is divided by the corresponding value in the central y bin \(3.0<y<3.5\). Such normalisation leads to a great reduction of the ‘MNR’ uncertainties of the theoretical predictions (discussed in detail later in Sect. 8.1.2), making them of the same order or below the experimental uncertainties, and enables the PDF uncertainties being visible in all bins. Note that the PDF uncertainties for the cross sections in the lowest \(p_T\) bins of Fig. 62 extend to unphysical values below zero (although not appearing on the left-hand side of Fig. 62 because of the logarithmic scale) due to the usage of PDFs with a negative gluon distribution at low x.
This illustrates the power of the LHCb charm data to eventially constrain existing PDFs. The quantitative analysis follows in Sect. 8.
8 QCD analysis of HERA and LHCb heavy-flavour data
This section describes a QCD analysis, extending the HERA fit by including the LHCb data presented in Sect. 7. The general strategy of the study was to perform first a PDF fit with the HERA-only data, which is close to HERAPDF1.0 [2], and then repeat the fit with the LHCb data included. In this way the net effect of the additional information is becoming obvious. Results presented in this section have been published by the PROSA Collaboration [6].
8.1 PDF fitting framework
The datasets used in the PDF fit are listed in Table 14:
-
the combined HERA-I inclusive ep NC and CC DIS cross sections [2] (datasets 1–4) serve to constrain the core of the PDFs; the analysis is restricted to the inclusive data with virtuality \(Q^2>Q^2_\mathrm{min}={3.5}~{\mathrm{GeV}^2}\) to ensure the applicability of pQCD;
-
the combined HERA charm data [60] and ZEUS beauty [30] data (datasets 5–6) were used to constrain the gluon PDF and the charm and beauty masses;
-
the LHCb charm [177] and beauty [247] data (datasets 7–14) – the new ingredients of the study – serve to constrain the gluon PDF at low x.
The HERA data (datasets 1–6) were treated in the same way as in the original papers [2, 30, 60].Footnote 67
For the LHCb data (datasets 7–14), the double-differential cross sections as a function of \(p_T\) and y, \({\frac{\mathrm{d}^2 \sigma (pp \rightarrow H_c X)}{\mathrm{d}p_T\mathrm{d}y}}\), were used as published in [177, 247].Footnote 68 The correlations between the systematic uncertainties were taken into account as described in Sect. 3.3 of [177] and Sect. 4 of [247], treating as correlated those which are reported as single values for all (\(p_T\), y) bins.Footnote 69 The 3.5% luminosity uncertainty was treated as correlated between the charm and beauty measurements. In addition to the experimental uncertainties, the correlated fragmentation-fraction uncertainties were assigned to the data.
8.1.1 Details of PDF fit
The PDF fitting framework is the same as has been used for the FFNS fit with the HERA charm combined data, described in Sect. 6.5.3. The charm and beauty masses were left free in the fit and determined in HERAFitter by minimisation of a \(\chi ^2\)-function. In variants of the fit with the LHCb heavy-flavour data additional uncertainties were evaluated, which are related to the uncertainties of the respective theoretical calculations; they are referred to as the ‘MNR uncertainties’:
-
variations of the fragmentation and renormalisation scales, as described later in Sect. 8.1.2, and
-
variations of the fragmentation parameters \(\alpha _k=4.4 \pm 1.7\) for charm and \(\alpha _k=11 \pm 4\) for beauty.
The MNR uncertainties were obtained by adding these variations in quadrature.
8.1.2 Strategy of QCD analysis
The strategy of the QCD analysis was to perform several PDF fits, with and without the LHCb data, and then compare the results. Two approaches of fitting the LHCb data were studied: fitting the absolute cross section or the cross section normalised as described below.
Fitting absolute LHCb cross sections
The absolute double-differential cross sections \(\frac{\mathrm{d}^2\sigma }{\mathrm{d}p_T\mathrm{d}y}\) measured by LHCb were fitted. These quantities contain the maximum information; they are therefore sensitive to all physical and non-physical parameters of the theoretical calculations: the PDFs, heavy-quark mass, fragmentation function and especially factorisation and renormalisation scales. The scale dependence of the predictions is of the order of a factor of 2, thus much exceeding the experimental data uncertainties, although the PDF uncertainties from the available PDF sets at very low x and low \(Q^2\) are even larger (see Fig. 62). This fact makes the study rather complicated: in order to account for the uncertainties of the perturbative predictions, the scales should be varied, but these external variations change the description of the data and the fit results drastically, and thus are hard to control.
For this variant of the fit, the scale parameters \(A_f^c\), \(A_r^c\), \(A_f^b\) and \(A_r^b\) were therefore included in the fit, while for the estimation of the scale uncertainties the following procedure was used: the factorisation and renormalisation scales were varied independently one at a time in the ranges [0.50; 2.00] and [0.25; 1.00],Footnote 70 respectively, while the other scale was being refitted. To be specific, the scale uncertainties include the following four variations:
-
\(A^c_f=A^b_f=2.00\) with \(A^c_r\), \(A^b_r\) free;
-
\(A^c_f=A^b_f=0.50\) with \(A^c_r\), \(A^b_r\) free;
-
\(A^c_r=A^b_r=1.00\) with \(A^c_f\), \(A^b_f\) free;
-
\(A^c_r=A^b_r=0.25\) with \(A^c_f\), \(A^b_f\) free.
In addition, for the variation \(A^c_f=A^b_f=0.50\), the cut \(p_T>{2}~\mathrm{GeV}\) was applied for the charm LHCb data to ensure that the factorisation scale is above \({1}~{\mathrm{GeV}^2}\), since this is technically required in the framework. This sophisticated procedure for the treatment of the scale variations was necessary to give a reasonable description of the data for all variations of the fit.
Fitting normalised LHCb cross sections
The y shape of the cross-section ratio \(\frac{\mathrm{d}\sigma }{\mathrm{d}y} / \frac{\mathrm{d}\sigma }{\mathrm{d}y_0}\) in each \(p_T\) bin was fitted, where \(\frac{\mathrm{d}\sigma }{\mathrm{d}y_0}\) is the cross section in the central rapidity bin \(3.0<y_0<3.5\). The virtue is that the observable defined in this way has a much reduced scale dependence, while it still remains sensitive to the PDFs, namely to their x shape. This can be understood easily: the change in the production rate in neighbouring bins of y is driven mainly by the change in the input PDFs, while the hard-scattering process remains essentially the same. Hence the \(\mu _r\) dependence is reduced to \(\sim \)1% and the \(\mu _f\) to \(\sim 5\)–\(10\%\) (the renormalisation scale affects the matrix elements only, while the factorisation scale affects both the matrix elements and the PDFs). Reduction of the scale dependence is illustrated in Figs. 63 and 64. In addition, the dependence on the heavy-quark mass and the fragmentation function is also significantly reduced. For the mass, it is reduced almost to zero, while the fragmentation effects are still sizeable at low transverse momentum, since the fragmentation is performed by rescaling the quark three-momentum and thus it changes the rapidity of a massive particle.
Owing to the greatly reduced dependence on the scales, in this variant of the fit the ‘common’ scale choice and variations were used: the scale parameters were fixed to \(A^c_f=A^b_f=A^c_r=A^b_r=1\) and for the estimation of the scale uncertainties they were varied independently one at a time in the range [0.5; 2.0]. Explicitly, the scale uncertainties include the following four variations:
-
\(A^c_f=A^b_f=2.0\), \(A^c_r=A^b_r=1.0\);
-
\(A^c_f=A^b_f=0.5\), \(A^c_r=A^b_r=1.0\);
-
\(A^c_f=A^b_f=1.0\), \(A^c_r=A^b_r=2.0\);
-
\(A^c_f=A^b_f=1.0\), \(A^c_r=A^b_r=0.5\).
Similar to the previous approach, for the variation \(A^c_f=A^b_f=0.50\), the cut \(p_T>{2}~\mathrm{GeV}\) was applied for the charm LHCb data to ensure that the factorisation scale is above \({1}~{\mathrm{GeV}^2}\).
All correlated experimental systematic uncertainties and the fragmentation fractions cancel for the normalised cross sections, while for a given \(p_T\) bin the uncorrelated uncertainty of the central \(\frac{\mathrm{d}\sigma }{\mathrm{d}y_0}\) bin was treated as correlated between the remaining y bins (because the cross sections in the remaining y bins were divided by the same \(\frac{\mathrm{d} \sigma }{\mathrm{d}y_0}\)).
8.2 Fit results
The results of three fits are presented and discussed:
-
the fit with the HERA-only data, referred to as ‘HERA only’ (Sect. 8.2.1);
-
the fit with the HERA and LHCb data using the absolute LHCb cross sections, referred to as ‘LHCb Abs’ (Sect. 8.2.2);
-
the fit with the HERA and LHCb data using the normalised LHCb cross sections, referred to as ‘LHCb Norm’ (Sect. 8.2.3).
The direct comparison of all fitted PDFs follows in Sect. 8.3.
8.2.1 ‘HERA only’
Here the results of the fit with the HERA-only data (datasets 1–6) are presented. The total \(\chi ^2\) per degree of freedom for the fit is \(\chi ^{2}/n_{\text {dof}} =647/646\) yields a good consistency of the data. All individual \(\chi ^2\) contributions (see Eq. (6.17) in Sect. 6.5.3) are given in Table 15. For reference, Table 16 lists the fitted parameters (see Eq. (6.15)) with their fit uncertainties only, while the total PDF uncertainties are discussed below in Figs. 65, 65, 66, 67, 68, 69, 70, 71 and 72.
The fit, model and parametrisation uncertainties of the gluon, seaFootnote 71 and valence-quark distributions at the scale \(Q^2={10}~{\mathrm{GeV}^2}\) are shown in Fig. 65. Note the gluon uncertainties in the low-x region: since this region is not covered directly by the HERA data, the dominant uncertainties are the parametrisation ones, namely those which arise from releasing the \(D_{\bar{U}}\) parameter. This is illustrated in Fig. 66, where all parametrisation variations are shown separately. At low values \(x \lesssim 10^{-4}\) the gluon distribution is not directly constrained by the HERA data and should be considered as an extrapolation which relies on PDF parametrisation assumptions. Qualitatively it can be understood in the following way: since gluons in this region are not constrained by the data, they are indirectly constrained via the sum rules for certain distributions of all other partons. When the parametrisation for other partons (in particular, for sea quarks) is changed, new parameter values via the sum rules necessarily result in a different distribution for gluons in the low-x region. However, the parametrisation variations do not result in a significant difference in the x region constrained by the HERA data. This also explains the large spread of the results obtained by the different PDF groups, which was observed in Fig. 50: since the different groups use different parametrisations and none of them uses data which constrain gluons at low x, they all obtain different gluon distributions in this region.
8.2.2 ‘LHCb Abs’
Here the results of the fit with the HERA and LHCb data (datasets 1–14) using the ‘LHCb Abs’ approach are presented. The total \(\chi ^{2} \) per degree of freedom is \(\chi ^{2}/n_{\text {dof}} =1073/1087\). The partial \(\chi ^{2}/n_{\text {dof}}\) for all datasets are given in Table 15. For the LHCb charm and beauty datasets they vary from 0.9 to 1.8 and from 0.7 to 1.0, respectively, indicating an overall reasonable description of the charm and beauty data. The inclusion of the LHCb data does not change significantly the quality of the description of the HERA datasets compared to the ‘HERA-only‘ fit, ensuring consistency between HERA and LHCb data.Footnote 72 As an example of the data description in the fit, in Fig. 67 the cross sections for \(D^{0}\) and \(B^{+}\) mesons for one of the y bins are shown.
Adjusting the scales in the fit results in the following fitted values for the scale parameters (see Table 16):
Note that all values are within the range [0.25;1.00]; also note the significant difference between the fitted scales for charm and beauty. Additionally, as expected, a positive correlation was found between \(A^c_f\), \(A^c_r\) and \(A^b_f\), \(A^b_r\), respectively. The fitted pole masses of the c and b quarks are consistent with the ones obtained in the ‘HERA-only’ fit within the intrinsic theoretical systematic uncertainty of the pole mass definition (see Sect. 2.3).
The parametrisation variations are shown in Fig. 68 (top left). As expected, in contrast to the results obtained with the HERA-only data, gluons are now strongly constrained in the low-x region. The fit uncertainties for the parameters of the gluon distribution are significantly reduced, as can be seen from Table 16. Note that Table 16 list only the fit uncertainties of the PDF parameters, while the other components of the PDF uncertainties are shown in Fig. 69.
The effect of scale variations on the predictions in the fit is shown in Fig. 67 and their effect on the fitted PDFs is shown in Fig. 68 (top right). The scale uncertainties are much larger than the parametrisation uncertainties, however, compared to the fit with the HERA-only data they are a factor of 3 smaller than the total uncertainties. Another interesting observation from Figs. 67 and 68 (top right) is that the changes for the predictions from the scale variations are predominantly changes in their normalisation (see also Figs. 63, 64); the fit handles them by adjusting the other scale and making large shifts for the correlated uncertainties of the data. It shows up in a formally bad \(\chi ^2\) value, however, the PDFs are less affected and remain reasonable, compared to the huge total ‘HERA-only’ uncertainty at low x.
In addition, variations of the fragmentation-function parameters were performed, as described in Sect. 7.3.1. The effect on the fitted PDFs is shown in Fig. 68 (bottom). All fragmentation variations yield in a good description of the data, since relatively small changes of the \(p_T\) shape are easily compensated by adjusting the scales. The resulting uncertainties are much smaller than the scale variations. However, for charm a strong tendency was observed: the LHCb charm data favour a harder fragmentation function; this is discussed in more detail in Appendix E.2.
Finally, all individual contributions to the uncertainties are shown in Fig. 69. The dominant uncertainties on the gluon distribution in the low-x region become the MNR ones, in particular coming from the scale variations.
8.2.3 ‘LHCb Norm’
Here the results of the fit with the HERA and LHCb data (datasets 1–14) using the ‘LHCb Norm’ approach are presented. The total \(\chi ^{2} \) per degree of freedom is \(\chi ^{2}/n_{\text {dof}} =958/994\). The partial \(\chi ^{2}/n_{\text {dof}}\) for all datasets are given in Table 15. For the LHCb charm and beauty datasets they vary from 0.4 to 0.9,Footnote 73 indicating description of the data and possible overestimation of the uncorrelated experimental uncertainties for the y shape (this can be thought of rather as an underestimation of correlations of the systematics). Similar to the ‘LHCb Abs’ fit, the inclusion of the LHCb data do not change significantly the quality of the description of the HERA datasets compared to the ‘HERA-only‘ fit, assuring consistency between HERA and LHCb data. As an example of the data description in the fit, in Fig. 70 the cross sections for \(D^{0}\) and \(B^{+}\) mesons for one of the y bins are shown.
The parametrisation variations are shown in Fig. 71 (top left). The gluon distribution in the low-x region is constrained considerably compared to the ‘HERA-only’ results, although somewhat weaker than in the ‘LHCb Abs’ approach.
The effect of the scale variations on the predictions in the fit is shown in Fig. 70 and their effect on the fitted PDFs is shown in Fig. 71 (top right). The effect of the fragmentation variations on the PDFs is shown in Fig. 71 (bottom). Note that fragmentation uncertainties obtained in this approach are larger than in the ‘LHCb Abs’ one, since the fragmentation effects are not reabsorbed in the refitted scales. All these variations result in a reasonable data description.
Finally, all individual contributions to the uncertainties are shown in Fig. 72. The dominant uncertainties in the low-x and low-\(Q^2\) region still remain the MNR ones, although they are comparable in size with the uncertainties from other sources.
8.3 Impact of LHCb heavy-flavour data on PDFs
The main results of this study can be seen in Figs. 73 and 74: the PDFs obtained in the ‘HERA-only’, ‘LHCb Abs’ and ‘LHCb Norm’ fits are compared at the scale \(Q^2={10}~{\mathrm{GeV}^2}\) in Fig. 73, while their relative uncertainties are compared in Fig. 74.Footnote 74
The two approaches of fitting the LHCb data result in strong and consistent constraints on the gluon distribution at low x. Improvement is also observed for the sea density, while the valence-quark distributions, which are decoupled in the evolution, remain essentially the same. Improvement of the sea distribution comes mainly from the correlation of gluons and sea quarks via the PDF evolution equations. Quantitatively, on average, the reduction of the total uncertainty for gluons and sea quarks in the region \(10^{-6}<x<10^{-4}\), observed up to the scales \(Q^2 \sim {1000}~{\mathrm{GeV}^2}\), is of the order of a factor of 1.5–4. The gluon distribution is now positive in the region directly covered by the data \(x \gtrsim 4 \times 10^{-6}\), \(Q^2 \gtrsim m_c^2 \approx {2}~{\mathrm{GeV}^2}\). Compared to the gluon distributions provided by several modern PDF sets, shown in Fig. 50, the shape of the gluon distribution favoured by the LHCb data is close to that in the ABM PDFs. The distributions at medium x mainly remain unchanged, although in the ‘LHCb Abs’ approach some enlargement of the uncertainty is observed, explained by the inclusion of the scale uncertainties for the LHCb data. No such effect is observed in the ‘LHCb Norm’ approach, where all variations describe the data well.
In addition, a noticeable improvement is observed for all partons in the region of high x also. This is presumably due to the constraints of the beauty LHCb data (see Fig. 51) which cover this region, as well as a side effect of the improvement at low x, imposed via the momentum sum rule.
Obviously, in the fit with the absolute cross sections, more information is available to constrain the gluons: the absolute cross sections constrain the normalisation of the product of the gluon PDFs at low and medium x, leading to the correlation between the low-x region and the medium one. However, the uncertainty of this calibration is of the order of a factor 2, propagated from the scale uncertainties of the absolute cross sections.
In the fit with the normalised cross sections only the information of the y distribution of the cross sections was used, which is sensitive to the slope of the gluon distribution. In this approach therefore, the final impact of the LHCb data crucially depends on the presence of any x region where the absolute values of the gluon distribution must be constrained by other data (preferably at \(x \sim 10^{-4}\)–\(10^{-3}\)). Despite the reduced sensitivity, significantly smaller theoretical uncertainties are resulting owing to the reduced scale dependence of the normalised cross sections, so the final results are more precise than in the ‘LHCb Abs’ approach. As opposed to the absolute case, the theoretical calculations are data independent in this case. In Fig. 75 the measured \(D^0\) cross sections [177] are compared to the NLO predictions obtained using the fitted ‘LHCb Norm’ PDFs. The theoretical uncertainties denoted ‘MNR’ in Fig. 62 include uncertainties from scale, heavy-quark mass and fragmentation function variations, while the total theoretical uncertainties include also those arising from the PDFs. Compared to the predictions obtained using the PDFs from HERA only (see Fig. 62), the PDF uncertainties are barely visible in this comparison, as expected, since PDFs are constrained by the data. It is important to note that the PDFs determined using the y shape of the LHCb data provide a good description of the absolute cross sections, within large theoretical ‘MNR’ uncertainties for the latter.
8.4 Concluding remarks
The observed strong impact of the charm and beauty LHCb measurements demonstrates that these data are a powerful addition to the existing global PDF fits. Quantitatively the reduction of the gluon and sea-quark distribution uncertainties in the x range \(x \lesssim 10^{-4}\), not probed by HERA, is of the order of a factor of 1.5–4. The inclusion of the LHCb data results in a positive definite gluon distribution in the full phase space covered by the data.
The study indicates that the provided constraints are subject to sizeable theoretical uncertainties. Currently none of the PDF fitting groups estimate perturbative uncertainties of theoretical predictions (e.g. uncertainties from scale variations), therefore the ‘LHCb Norm’ approach should look more attractive since the uncertainties from the scale variations are not crucial, while in the ‘LHCb Abs’ approach results without the scale uncertainties will not be trustworthy.
Furthermore the inclusion of perturbative theoretical uncertainties in the PDF fits is becoming a pressing issue. Once an improved strategy is developed, both considered approaches of fitting the LHCb heavy-flavour data can be used in the future global fits. Having the scale uncertainties under control will provide a possibility to exploit the LHCb heavy-flavour data also for a precise measurement of the charm and beauty masses, using the absolute cross sections.
Improved precision of the gluon distribution at low x has implications in the physics of atmospheric showers, being important for calculations of prompt lepton fluxes in the atmosphere; see e.g. for recent studies [268,269,270,271]. At some point astrophysical measurements of high-energy neutrinos may provide an upper limit on charm hadroproduction in the atmosphere and complement collider-based measurements.
The final remark concerns the ‘LHCb Norm’ approach. As previously mentioned, the constraints at low x obtained in this approach crucially depend on the presence of any medium-x region already constrained by other data. In this context, the inclusion in the PDF fit of further datasets sensitive to gluons, e.g. jet measurements, should be very interesting. Another possible improvement may come from precise heavy-flavour measurements at the LHC near the kinematic threshold in the complementary rapidity region, which will extend the fitted y shape to the central region \(0<y<2\) and therefore to the medium range of gluon x.
9 Conclusions and outlook
In this review the total set of charm-production measurements in deep inelastic scattering at HERA, both inclusive and exclusive, has been presented and analysed. The data were obtained by the two Collaborations H1 and ZEUS with their multipurpose detectors during the two operation phases of HERA and constitute an essential achievement of the HERA program. The measurements rely on several techniques and exploit specially developed detector components. All individual datasets were shown to be consistent with each other and could therefore be combined into a precise common set. The experimental uncertainty of the combined results reaches 4% in the region of medium \(Q^2\), and is about 8% on average. Also theoretical uncertainties entered, when extrapolations in unmeasured regions of phase space had to be performed.
Together with the HERA ep data also the LHCb pp data were included, since they provide complementary information about charm production. The constraining power of the precise double-differential LHCb data may be further improved by including in the QCD analysis also measurements of charm and beauty production at the LHC in the central rapidity phase-space region near the kinematic threshold, which can be obtained with the ATLAS and CMS detectors.
The theoretical framework for predicting the charm cross sections has been outlined. An essential feature is the heavy mass of the c-quark and thus the presence of a hard scale such that the application of perturbative calculations is justified in the whole kinematic range. In the phase space of currently available experimental data the most rigorous theoretical calculations are performed in the fixed-flavour-number scheme (FFNS). In this scheme the u, d, s quarks are massless, while the mass effects of heavy quarks (c, b) are fully accounted for. Heavy-flavour production at HERA and LHC are dominated by processes involving gluons in the initial state. Therefore the investigation of the gluon distribution was a central issue in this review and showed the importance of the LHCb data.
Quantitative predictions of charm productions were possible once the parton distribution functions had been extracted from experimental data. The NLO QCD predictions were shown to agree in the whole phase space with the data on charm production. The sensitivity of the predictions to the mass of the c-quark made it possible to determine from the HERA data the optimal value of the c-quark \(\overline{\mathrm{MS}}\) mass with a precision of about 3%. The extracted mass is consistent with the world-average value and has competitive precision to other individual determinations in perturbative QCD. The inclusion of the LHCb data to the HERA data improved considerably the accuracy of the gluon distribution at low x. The usage of the fixed-flavour-number scheme is of crucial importance in this analysis because it fully accounts for mass effects near the kinematic threshold without additional non-physical tunable parameters.
It turned out that the experimental precision of the data exceeds the precision of the theoretical calculations. Uncertainties in the perturbative QCD predictions arise from missing higher orders, QCD parameters, and non-perturbative parton distribution functions and fragmentation functions which must be extracted from data. Dominant theoretical uncertainties of the NLO calculations for charm production in the bulk of the available phase space come from missing higher orders. Higher-order calculations are needed in order to reduce the theoretical uncertainty to the level of the current data precision and thus enabling stronger tests of QCD. New measurements, e.g. those from the LHC or future collider experiments, with better precision or being performed in new regions of phase space, are expected to further improve the understanding of QCD and development of high-energy physics.
Notes
Although at a certain order of pQCD a VFNS can be converted to use other heavy-quark mass definition, for example see [23] for FONLL structure functions with \(\overline{\mathrm{MS}}\) running masses.
In other words, the pole mass is unobservable, because of confinement no free coloured quarks exist. Perturbation theory itself produces clear evidence for this non-perturbative correction to \(m_Q^\mathrm{pole}\): the signal is the peculiar factorial growth of the high-order terms in the \(\alpha _s\) expansion corresponding to a renormalon; for more details see, e.g. [27] and the references therein.
As of November 2016 only preliminary data from HERA on charm-mass running is available, i.e. only the most important figures have been publicly released by the H1 and ZEUS Collaborations, while the complete publication of the results is expected soon.
Both electrons and positrons are referred to as electrons, unless explicitly stated otherwise.
In this case the other heavy quark belongs to the proton remnant and thus is effectively integrated over.
Note that this scale \(\mu \) it is not the \(\mu _f\), which was introduced in Sect. 2.4.2, although the argument for its introduction is the same: to separate long-distance effects. This scale may be called the fragmentation scale.
The \(\oplus \) sign indicates that the terms are added in quadrature.
When the measured final state contains a charmed hadron.
ZUFOs are also referred to as energy flow objects (EFOs) in ZEUS publications.
Muons did not release all their energy in the CAL, thus if the CAL information was used the energy would be underestimated.
Despite the notation, it is not the probability in its mathematical meaning.
For a fully contained NC event, \(\delta _\mathrm{had}=2E_e={55}~\mathrm{GeV}\).
NLO calculations are much more complicated to be matched with parton showers.
Some relatively long-lived particles (typically pions, kaons, muons) are usually considered as stable in an MC generator, since they interact with a detector directly.
Genuine \(D^{+} \rightarrow K^{-}\pi ^{+}\pi ^{+}\) decays are referred to as signal.
Because of renormalisation of MC to the data.
This procedure corresponds to the measurement of charm production, when the beauty contribution is assumed to be known a priori.
For a single correction one should say rather “weighting”, but the term “reweighting” is much more convenient and will be used in this work. Moreover, this is not a single correction applied to MC in the analysis.
The indirect decay channel \(D^{+} \rightarrow \tilde{K}^{*0}(892)\pi ^{+}\) with subsequent \(\tilde{K}^{*0}(892) \rightarrow K^{-}\pi ^{+}\) was simulated in the MC and considered in the matching procedure.
The efficiency of the matching procedure is defined as the ratio of the number of matched particles to the number of candidates in the fitted signal. This quantity is not to be confused with the efficiency defined in Eq. (5.12).
Note that this procedure does not guarantee that the same weights have been applied at both levels (generator and reconstruction), and therefore cannot a priori guarantee consistency for the determined acceptance. In order to check it, the \(p_T(D^{+})\)–\(Q^2\) reweighting was performed by applying the same weight, derived from the “best” \(D^{+}\) (with highest \(p_T(D^{+})\)), on both levels. The difference between the two procedures was found to be less than \(0.5\%\).
At the moment when the results were being published (February 2013); later on the most precise ZEUS charm measurement became the measurement of \(D^{*+}\) production using the full HERA-II dataset [172].
In fact small correlations exist between inclusive measurements and those where full final states were reconstructed (e.g. between the measurement [30], where information from secondary vertices from all charm-hadron decays was used, and [172], where \(D^{*+}\) mesons were reconstructed in the \(D^{*+} \rightarrow D^{0}(K^{-}\pi ^{+})\pi ^{+}_{s}\) decay channel), but since the corresponding branching ratios are much smaller than 1, phase-space cuts differ and statistical uncertainties in heavy-flavour measurements are usually dominated by background, such correlations have been neglected.
It was found in [60] that the results are insensitive to the details of the symmetrisation procedure.
\(D^{0,\text { not }D^{*+}}\) refers to \(D^{0}\) that do not originate from decays of \(D^{*+} \).
In the case of extrapolation uncertainties, \(\alpha _K\) and \(\hat{s}_1\) variations were added in quadrature and treated as one source, referred to as ‘longitudinal fragmentation’.
In the case of extrapolation uncertainties this source is referred to as ‘transverse fragmentation’.
An agreement on the phase-space region and binning schemes was achieved between the H1 and ZEUS Collaborations before performing the measurements.
Although the single-differential \(D^{*+}\) cross sections as a function of \(Q^2\), in principle, also can be combined with HERA-I measurements without applying swimming corrections, this combination is not provided,
-
because information on the single-differential \(D^{*+}\) cross sections as a function of \(Q^2\) can be obtained from the double-differential \(D^{*+}\) cross sections as a function of \(Q^2\) and y, provided in Sect. 6.4.3;
-
to keep consistency between all the combined single-differential \(D^{*+}\) cross sections, which requires the same input data.
-
Although all input measurements from Table 6 give also the single-differential cross section as a function of the Bjorken variable x, the binning differs significantly, preventing a combination without large swimming corrections.
Since the normalisation was taken from another measurement, not from theory predictions, this is swimming, as explained in Sect. 6.2.3.
Since several of the theory parameters (e.g. the renormalisation and factorisation scales) are not physical parameters, and hence their “uncertainties” have no physical relevance, a demonstration rather than a detailed fit will suffice to clarify this point. Another reason not to perform a detailed fit is that the data are statistically correlated between the different distributions, therefore all the distributions must not be fitted simultaneously.
For dataset V the input bins are too large, while for dataset VI the main difficulty is the original differential cross section as a function of \(Q^2\) and x.
For dataset 11 an additional uncorrelated systematic uncertainty was considered: an uncertainty of 100% on \(\varDelta _\mathrm{had} = C_\mathrm{had} - 1\) (Table 6 of [30]).
The fully consistent theory set-up allowed for using existing input tables for \(\sigma _\mathrm{red}^{c\bar{c}} \)for datasets 1–8, available from [60], and straightforward comparison of new results of the combination with the ‘HERA 2012’ results; also note that two of three newly included ZEUS measurements (datasets 10 and 11) already published \(\sigma _\mathrm{red}^{c\bar{c}} \)extracted from the visible cross sections using exactly this theoretical set-up.
Except for dataset 8.
The PDF uncertainties were neglected for the newly included datasets 9–11, since for the other ones they were found to be negligibly small (1% on average) [60].
For the charm data the applicability of pQCD calculations is ensured by the presence of a massive c quark–antiquark pair in the final state; see also the scale choices.
For the calculation of the beauty contribution to the inclusive cross sections.
Note that a negative gluon distribution was allowed at the parametrisation scale.
For the c-quark mass, the fit uncertainty was determined with the MINOS algorithm [201].
I.e. the fit was performed with 14 free parameters.
Note that for the previous ‘HERA 2012’ result the lowest \(Q^2\) bin of the charm data has not been included in the fit; repeating the fit with the ‘HERA 2012’ data with the lowest \(Q^2\) bin gives the closer value \(m_c(m_c)=1.228 \begin{array}{c} +0.048\\ -0.038 \end{array}\mathrm{(fit)}~\begin{array}{c} +0.024\\ -0.000 \end{array}\mathrm{(mod)} ~\begin{array}{c} +0.022\\ -0.006 \end{array}(\alpha _s)\begin{array}{c} +0.025\\ -0.010 \end{array}(\mathrm{scale}) ~\begin{array}{c} +0.015\\ -0.000 \end{array}\mathrm{(par)}~\mathrm{GeV}\).
One of the four variants of the fitted \(m_c(m_c)\) from [234] is quoted.
Note that in this and the next sections \(Q^2\) denotes the PDF factorisation scale and not the virtuality of \(ep\) scattering, x denotes the longitudinal fraction of the proton momentum and not the Bjorken variable, y denotes rapidity and not inelasticity, unless otherwise stated explicitly.
The region \(x \lesssim 10^{-4}\) will be referred to as low x.
The quoted regions are qualitatively determined in the following way: for the HERA DIS data, the x range is indicated, where the gluon HERAPDF1.0 [2] uncertainty at \(Q^2={10}~{\mathrm{GeV}^2}\) is less than 10%. For the HERA charm and beauty data, the LO formula \(x=x_\mathrm{bj}(1+4m_Q^2/Q^2)\) is used, where \(x_\mathrm{bj}\) is the Bjorken variable, \(Q^2\) is boson virtuality and \(m_Q\) is the heavy-quark pole mass. For the LHCb charm and beauty data, the LO estimation is used as described above.
The typical momentum (in the laboratory frame) of the decay products in two-body B decays is about \({50}~\mathrm{GeV}\). The requirement of maintaining a high efficiency for the reconstruction of these decays leads to the need for particle identification up to at least \({100}~\mathrm{GeV}\). The lower momentum limit of about \({2}~\mathrm{GeV}\) follows from the need to identify decay products from high-multiplicity B decays and also from the fact that particles below this momentum will not pass through the dipole magnetic field (\({4}~\mathrm{Tm}\)) of the LHCb spectrometer [257].
The ‘FONLL’ option of the FONLL program was used; the settings consistently used in MNR and FONLL calculations were: PDFs set is MSTW2008nlo68cl [220], \(\mu _f=\mu _r=\sqrt{m_Q^2+p_T^2}\), \(m_c={1.5}~\mathrm{GeV}\), \(m_b={4.75}~\mathrm{GeV}\).
The fragmentation effects do not change significantly \(p_T\) regions, since the heavy-flavour fragmentation functions are peaked near the scaling variable \(z=1\) and the cross sections are steeply falling with increasing \(p_T\).
Theorists are continuously making progress, and the approximate NNLO \(O(\alpha _s^4)\) predictions in the gg and \(q\bar{q}\) channels for differential cross sections for heavy-flavour production at hadron colliders became available recently [267].
The restriction to the \(D^0\) final state for this comparison is motivated by the best experimental precision of the LHCb data [177] owing to the presence of two charged daughter tracks only and therefore the smallest systematic uncertainties on the tracking efficiency.
Except that for dataset 5 in contrast to [60] all \(Q^2\) bins were used including the lowest one \(Q^2={2.5}~{\mathrm{GeV}^2}\); the applicability of pQCD for the charm data is ensured by the presence of a massive c quark–antiquark pair in the final state.
For the \(\varLambda ^{+}_c\) measurement from [177], where no double-differential distribution is available, the single-differential cross sections \({\frac{\mathrm{d} \sigma (pp \rightarrow \varLambda ^{+}_c X)}{\mathrm{d}p_T}}\) and \({\frac{\mathrm{d} \sigma (pp \rightarrow \varLambda ^{+}_c X)}{\mathrm{d}y}}\) were used for the ‘LHCb Abs’ and ‘LHCb Norm’ approaches (see Sect. 8.1.2), respectively.
Except that for the sources ‘Bin size’, ‘Trigger efficiency’, ‘Tracking efficiency’, ‘Muon identification’ and ‘Angular distribution’ from the beauty measurement the lowest boundaries from the respective ranges reported in Table 1 of [247] were taken as a correlated part of the uncertainties.
The ‘common’ range for the variations [0.50; 2.00] for \(\mu _r\) is ignored, since the \(\chi ^{2}/n_{\text {dof}} \) for \(A^c_r=A^b_r=2.00\) variation was found to be unacceptably large (\(\chi ^{2}/n_{\text {dof}} =2497/1089\)).
The sea-quark distribution is defined as \(\Sigma = \overline{u} + \overline{d} + \overline{s}\).
With the only exception of the worsening of the HERA charm data description due to the value of \(m_c\), which is in a tension with that preferred by the HERA charm data (see Table 16), if only the criterion of a \(\chi ^2\) variation of 1 is considered.
Except for the low-statistics \(\varLambda ^{+}_c\) dataset, where \(\chi ^{2}/n_{\text {dof}} =4.9/3\).
From a calculation point of view, the theoretical model consists of the numerical integration of an integro-differential equation and multiple convolution integrals that are evaluated mostly by adaptive algorithms (K-factors). Change of a parameter (\(M_c\) in this case) results in the appearance of an uncontrolled numerical noise. Some details can be found also in [232].
The timing depends on the number of bins, desired accuracy of the predictions and CPU; the quoted one is for 40 bins from [177], 1% inaccuracy and Intel Core i7-3520M.
The ‘NLO’ option of the FONLL program was used.
References
H. Abramowicz et al., Combination of measurements of inclusive deep inelastic \({e}^\pm p\) scattering cross sections and QCD analysis of HERA data. Eur. Phys. J. C 75(12), 580 (2015). doi:10.1140/epjc/s10052-015-3710-4. arXiv:1506.06042 [hep-ex]
F. Aaron et al., Combined measurement and QCD analysis of the inclusive \({e}^\pm p\) scattering cross sections at HERA. JHEP 1001, 109 (2010). doi:10.1007/JHEP01(2010)109. arXiv:0911.0884 [hep-ex]
O. Zenaiev, Charm Production and QCD Analysis at HERA and LHC. Ph.D. thesis, Hamburg University (2015)
I. Abt et al., Measurement of \(D^\pm \) production in deep inelastic ep scattering with the ZEUS detector at HERA. JHEP 1305, 023 (2013). doi:10.1007/JHEP05(2013)023. arXiv:1302.5058 [hep-ex]
H. Abramowicz et al., Combination of differential \(D^{*\pm }\) cross-section measurements in deep-inelastic \(ep\) scattering at HERA. JHEP 09, 149 (2015). doi:10.1007/JHEP09(2015)149. arXiv:1503.06042 [hep-ex]
O. Zenaiev et al., Impact of heavy-flavour production cross sections measured by the LHCb experiment on parton distribution functions at low \(x\). Eur. Phys. J. C 75(8), 396 (2015). doi:10.1140/epjc/s10052-015-3618-z. arXiv:1503.04581 [hep-ph]
W.A. Bardeen et al., Deep inelastic scattering beyond the leading order in asymptotically free gauge theories. Phys. Rev. D 18, 3998 (1978). doi:10.1103/PhysRevD.18.3998
K. Olive et al., Review of particle physics. Chin. Phys. C 38, 090001 (2014). doi:10.1088/1674-1137/38/9/090001
J.C. Collins, D.E. Soper, G.F. Sterman, Factorization of hard processes in QCD. Adv. Ser. Direct. High Energy Phys. 5, 1–91 (1988). arXiv:hep-ph/0409313
O. Behnke, A. Geiser, M. Lisovyi, Charm, beauty and top at HERA. Prog. Part. Nucl. Phys. 84, 1–72 (2015). doi:10.1016/j.ppnp.2015.06.002. arXiv:1506.07519 [hep-ex]
M. Gluck, E. Reya, M. Stratmann, Heavy quarks at high-energy colliders. Nucl. Phys. B 422, 37–56 (1994). doi:10.1016/0550-3213(94)00131-6
O. Kuprash, QCD analysis of isolated photon and jet data from \(ep,pp,\) and \(p\bar{p}\) collisions and tests of \(\alpha _s\) running. Ph.D. thesis, Hamburg University (2014)
M. Botje, QCDNUM: fast QCD evolution and convolution. Comput. Phys. Commun. 182, 490–532 (2011). doi:10.1016/j.cpc.2010.10.020. arXiv:1005.1481 [hep-ph]
J.C. Collins, W.-K. Tung, Calculating heavy quark distributions. Nucl. Phys. B 278, 934 (1986). doi:10.1016/0550-3213(86)90425-6
M. Aivazis, F.I. Olness, W.-K. Tung, Leptoproduction of heavy quarks. 1. General formalism and kinematics of charged current and neutral current production processes. Phys. Rev. D 50, 3085–3101 (1994). doi:10.1103/PhysRevD.50.3085. arXiv:hep-ph/9312318
M. Aivazis et al., Leptoproduction of heavy quarks. 2. A unified QCD formulation of charged and neutral current processes from fixed target to collider energies. Phys. Rev. D 50, 3102–3118 (1994). doi:10.1103/PhysRevD.50.3102. arXiv:hep-ph/9312319
M. Buza et al., Heavy quark coefficient functions at asymptotic values \(Q^2 \gg m^2\). Nucl. Phys. B 472, 611–658 (1996). doi:10.1016/0550-3213(96)00228-3. arXiv:hep-ph/9601302
J.C. Collins, Hard scattering factorization with heavy quarks: a general treatment. Phys. Rev. D 58, 094002 (1998). doi:10.1103/PhysRevD.58.094002. arXiv:hep-ph/9806259
M. Kramer, F.I. Olness, D.E. Soper, Treatment of heavy quarks in deeply inelastic scattering. Phys. Rev. D 62, 096007 (2000). doi:10.1103/PhysRevD.62.096007. arXiv:hep-ph/0003035
W.-K. Tung, S. Kretzer, C. Schmidt, Open heavy flavor production in QCD: conceptual framework and implementation issues. J. Phys. G 28, 983–996 (2002). doi:10.1088/0954-3899/28/5/321. arXiv:hep-ph/0110247
R. Thorne, A variable-flavor number scheme for NNLO. Phys. Rev. D 73, 054019 (2006). doi:10.1103/PhysRevD.73.054019. arXiv:hep-ph/0601245
S. Forte et al., Heavy quarks in deep-inelastic scattering. Nucl. Phys. B 834, 116–162 (2010). doi:10.1016/j.nuclphysb.2010.03.014. arXiv:1001.2312 [hep-ph]
V. Bertone et al., A determination of \(m_c(m_c)\) from HERA data using a matched heavy-flavor scheme. JHEP 08, 050 (2016). doi:10.1007/JHEP08(2016)050. arXiv:1605.01946 [hep-ph]
J. Pumplin, H. Lai, W. Tung, The charm parton content of the nucleon. Phys. Rev. D 75, 054029 (2007). doi:10.1103/PhysRevD.75.054029. arXiv:hep-ph/0701220
G. Lykasov et al., Forward heavy flavour production in \(p\)-\(p\) collisions at LHC and intrinsic quark components in proton. Europhys. Lett. 99, 21002 (2012). doi:10.1209/0295-5075/99/21002. arXiv:1205.1131 [hep-ph]
R. D. Ball et al., A determination of the charm content of the proton. Eur. Phys. J. C 76(11), 647 (2016), arXiv:1605.06515 [hep-ph]
I.I. Bigi et al., The pole mass of the heavy quark. Perturbation theory and beyond. Phys. Rev. D 50, 2234–2246 (1994). doi:10.1103/PhysRevD.50.2234. arXiv:hep-ph/9402360
S. Alekhin, S. Moch, Heavy-quark deep-inelastic scattering with a running mass. Phys. Lett. B 699, 345–353 (2011). doi:10.1016/j.physletb.2011.04.026. arXiv:1011.5790 [hep-ph]
J. Abdallah et al., Study of \(b\)-quark mass effects in multijet topologies with the DELPHI detector at LEP. Eur. Phys. J. C 55, 525–538 (2008). doi:10.1140/epjc/s10052-008-0631-5. arXiv:0804.3883 [hep-ex]
H. Abramowicz et al., Measurement of beauty and charm production in deep inelastic scattering at HERA and measurement of the beauty-quark mass. JHEP 1409, 127 (2014). doi:10.1007/JHEP09(2014)127. arXiv:1405.6915 [hep-ex]
Determination of charm mass running from an analysis of combined HERA charm data. H1-prelim-14-071, ZEUS-prel-14-006
N. Gray et al., Three loop relation of quark \(\overline{\rm MS}\) and pole masses. Z. Phys. C 48, 673–680 (1990). doi:10.1007/BF01614703
D.J. Broadhurst, N. Gray, K. Schilcher, Gauge invariant on-shell \(Z_2\) in QED, QCD and the effective field theory of a static quark. Z. Phys. C 52, 111–122 (1991). doi:10.1007/BF01412333
K. Chetyrkin, M. Steinhauser, Short distance mass of a heavy quark at order \(\alpha _s^3\). Phys. Rev. Lett. 83, 4001–4004 (1999). doi:10.1103/PhysRevLett.83.4001. arXiv:hep-ph/9907509
K. Melnikov, T.V. Ritbergen, The three loop relation between the \(\overline{\rm MS}\) and the pole quark masses. Phys. Lett. B 482, 99–108 (2000). doi:10.1016/S0370-2693(00)00507-4. arXiv:hep-ph/9912391
J. Breitweg et al., Measurement of \(D^{*\pm }\) production and the charm contribution to \(F_2\) in deep inelastic scattering at HERA. Eur. Phys. J. C 12, 35–52 (2000). doi:10.1007/s100529900244. arXiv:hep-ex/9908012
W.L. van Neerven, Production of heavy quarks in deep inelastic lepton hadron scattering AIP Conf. Proc. 601(40), 40–59 (2001). doi:10.1063/1.1435523. arXiv:hep-ph/0107193
A.M. Cooper-Sarkar, R. Devenish, A. De Roeck, Structure functions of the nucleon and their interpretation. Int. J. Mod. Phys. A 13, 3385–3586 (1998). doi:10.1142/S0217751X98001670. arXiv:hep-ph/9712301
M. Diemoz et al., Parton densities from deep inelastic scattering to hadronic processes at super collider energies. Z. Phys. C 39, 21 (1988). doi:10.1007/BF01560387
J.V. Allaby et al., Parametrization of proton structure functions. Phys. Lett. B 197, 281–284 (1987). doi:10.1016/0370-2693(87)90384-4
V. Gribov, L. Lipatov, Deep inelastic \(ep\) scattering in perturbation theory. Sov. J. Nucl. Phys. 15, 438–450 (1972)
Y.L. Dokshitzer, calculation of the structure functions for deep inelastic scattering and \(e^{+}e^{-}\) annihilation by perturbation theory in quantum chromodynamics. Sov. Phys. JETP 46, 641–653 (1977) [Zh. Eksp. Teor. Fiz. 73, 1216 (1977)]
G. Altarelli, G. Parisi, Asymptotic freedom in parton language. Nucl. Phys. B 126, 298 (1977). doi:10.1016/0550-3213(77)90384-4
G. Curci, W. Furmanski, R. Petronzio, Evolution of parton densities beyond leading order: the nonsinglet case. Nucl. Phys. B 175, 27 (1980). doi:10.1016/0550-3213(80)90003-6
W. Furmanski, R. Petronzio, Singlet parton densities beyond leading order. Phys. Lett. B 97, 437 (1980). doi:10.1016/0370-2693(80)90636-X
S. Moch, J. Vermaseren, A. Vogt, The three-loop splitting functions in QCD: the nonsinglet case. Nucl. Phys. B 688, 101–134 (2004). doi:10.1016/j.nuclphysb.2004.03.030. arXiv:hep-ph/0403192
A. Vogt, S. Moch, J. Vermaseren, The three-loop splitting functions in QCD: the singlet case. Nucl. Phys. B 691, 129–181 (2004). doi:10.1016/j.nuclphysb.2004.04.024. arXiv:hep-ph/0404111
E.A. Kuraev, L.N. Lipatov, V.S. Fadin, Multi-reggeon processes in the Yang–Mills theory. Sov. Phys. JETP 44, 443–450 (1976)
E. Kuraev, L. Lipatov, V.S. Fadin, The Pomeranchuk singularity in nonabelian gauge theories. Sov. Phys. JETP 45, 199–204 (1977)
I. Balitsky, L. Lipatov, The Pomeranchuk singularity in quantum chromodynamics. Sov. J. Nucl. Phys. 28, 822–829 (1978)
M. Ciafaloni, Coherence effects in initial jets at small \(Q^2/s\). Nucl. Phys. B 296, 49–74 (1988). doi:10.1016/0550-3213(88)90380-X
S. Catani, F. Fiorani, G. Marchesini, QCD coherence in initial state radiation. Phys. Lett. B 234, 339 (1990). doi:10.1016/0370-2693(90)91938-8
S. Catani, F. Fiorani, G. Marchesini, Small \(x\) behavior of initial state radiation in perturbative QCD. Nucl. Phys. B 336, 18 (1990). doi:10.1016/0550-3213(90)90342-B
G. Marchesini, QCD coherence in the structure function and associated distributions at small \(x\). Nucl. Phys. B 445, 49–80 (1995). doi:10.1016/0550-3213(95)00149-M. arXiv:hep-ph/9412327
E. Witten, Heavy quark contributions to deep inelastic scattering. Nucl. Phys. B 104, 445–476 (1976). doi:10.1016/0550-3213(76)90111-5
J. Babcock, D.W. Sivers, S. Wolfram, QCD estimates for heavy particle production. Phys. Rev. D 18, 162 (1978). doi:10.1103/PhysRevD.18.162
V.A. Novikov et al., Charm photoproduction and quantum chromodynamics. Nucl. Phys. B 136, 125 (1978). doi:10.1016/0550-3213(78)90019-6 [Yad. Fiz. 27, 771 (1978)]
J.P. Leveille, T.J. Weiler, Characteristics of heavy quark leptoproduction in QCD. Nucl. Phys. B 147, 147–173 (1979). doi:10.1016/0550-3213(79)90420-6
M. Gluck, E. Reya, Deep inelastic quantum chromodynamic charm leptoproduction. Phys. Lett. B 83, 98–102 (1979). doi:10.1016/0370-2693(79)90898-0
H. Abramowicz et al., Combination and QCD analysis of charm production cross section measurements in deep-inelastic \(ep\) scattering at HERA. Eur. Phys. J. C 73, 2311 (2013). doi:10.1140/epjc/s10052-013-2311-3. arXiv:1211.1182 [hep-ex]
E. Laenen et al., Complete \(O(\alpha _s)\) corrections to heavy flavor structure functions in electroproduction. Nucl. Phys. B 392, 162–228 (1993). doi:10.1016/0550-3213(93)90201-Y
E. Laenen et al., \(O(\alpha _s)\) corrections to heavy flavor inclusive distributions in electroproduction. Nucl. Phys. B 392, 229–250 (1993). doi:10.1016/0550-3213(93)90202-Z
B. Harris, J. Smith, Charm quark and \(D^{*\pm }\) cross-sections in deeply inelastic scattering at HERA. Phys. Rev. D 57, 2806–2812 (1998). doi:10.1103/PhysRevD.57.2806. arXiv:hep-ph/9706334
J. Ablinger et al., The 3-loop pure singlet heavy flavor contributions to the structure function \(F_2(x,Q^2)\) and the anomalous dimension. Nucl. Phys. B 890, 48–151 (2014). doi:10.1016/j.nuclphysb.2014.10.008. arXiv:1409.1135 [hep-ph]
A. Behring et al., The logarithmic contributions to the \(O(\alpha _s^3)\) asymptotic massive Wilson coefficients and operator matrix elements in deeply inelastic scattering. Eur. Phys. J. C 74(9), 3033 (2014). doi:10.1140/epjc/s10052-014-3033-x. arXiv:1403.6356 [hep-ph]
J. Ablinger et al., The \(O(\alpha _s^3)\) massive operator matrix elements of \(O(n_f)\) for the structure function \(F_2(x,Q^2)\) and transversity. Nucl. Phys. B 844, 26–54 (2011). doi:10.1016/j.nuclphysb.2010.10.021. arXiv:1008.3347 [hep-ph]
J. Blumlein et al., The \(O(\alpha _s^3 n_f T_F^2 C_{A,F})\) contributions to the gluonic massive operator matrix elements. Nucl. Phys. B 866, 196–211 (2013). doi:10.1016/j.nuclphysb.2012.09.001. arXiv:1205.4184 [hep-ph]
J. Ablinger et al., The 3-loop non-singlet heavy flavor contributions and anomalous dimensions for the structure function \(F_2(x,Q^2)\) and transversity. Nucl. Phys. B 886, 733–823 (2014). doi:10.1016/j.nuclphysb.2014.07.010. arXiv:1406.4654 [hep-ph]
H. Kawamura et al., On the next-to-next-to-leading order QCD corrections to heavy-quark production in deep-inelastic scattering. Nucl. Phys. B 864, 399–468 (2012). doi:10.1016/j.nuclphysb.2012.07.001. arXiv:1205.5727 [hep-ph]
I. Bierenbaum, J. Blumlein, S. Klein, Mellin moments of the \(O(\alpha _s^3)\) heavy flavor Contributions to unpolarized deep-inelastic scattering at \(Q^2 \gg m^2\) and anomalous dimensions. Nucl. Phys. B 820, 417–482 (2009). doi:10.1016/j.nuclphysb.2009.06.005. arXiv:0904.3563 [hep-ph]
I. Bierenbaum, J. Blumlein, S. Klein, Two-Loop massive operator matrix elements and unpolarized heavy flavor production at asymptotic values \(Q^2 \gg m^2\). Nucl. Phys. B 780, 40–75 (2007). doi:10.1016/j.nuclphysb.2007.04.030. arXiv:hep-ph/0703285
I. Bierenbaum et al., Two-loop massive operator matrix elements for unpolarized heavy flavor production to \(O(\epsilon )\). Nucl. Phys. B 803, 1–41 (2008). doi:10.1016/j.nuclphysb.2008.05.016. arXiv:0803.0273 [hep-ph]
G. Heinrich, B.A. Kniehl, Next-to-leading-order predictions for \(D^{*\pm }\) plus jet photoproduction at DESY HERA. Phys. Rev. D 70, 094035 (2004). doi:10.1103/PhysRevD.70.094035. arXiv:hep-ph/0409303
C. Sandoval, Inclusive single hadron production in neutral current deep-inelastic scattering at next-to-leading order. in Proceedings, 17th International Workshop on Deep-Inelastic Scattering and Related Subjects (DIS 2009): Madrid, Spain, 26–30 April 2009 (2009). arXiv:0908.0824 [hep-ph]
C. Sandoval, Inclusive production of hadrons in neutral and charged current deep inelastic scattering. Ph.D. thesis, Hamburg University (2009)
F. Aaron et al., Measurement of the \(D^{*\pm }\) meson production cross section and \(F_2^{c\bar{c}}\), at High \(Q^2\), in \(ep\) scattering at HERA. Phys. Lett. B 686, 91–100 (2010). doi:10.1016/j.physletb.2010.02.024. arXiv:0911.3989 [hep-ex]
F. Aaron et al., Measurement of \(D^{*\pm }\) meson production and determination of \(F_2^{c\bar{c}}\) at low \(Q^2\) in deep-inelastic scattering at HERA. Eur. Phys. J. C 71, 1769 (2011). doi:10.1140/epjc/s10052-011-1769-0. doi:10.1140/epjc/s10052-012-2252-2. arXiv:1106.1028 [hep-ex]
R.S. Thorne, R.G. Roberts, An Ordered analysis of heavy flavor production in deep inelastic scattering. Phys. Rev. D 57, 6871–6898 (1998). doi:10.1103/PhysRevD.57.6871. arXiv:hep-ph/9709442
R. Thorne, Effect of changes of variable flavor number scheme on parton distribution functions and predicted cross sections. Phys. Rev. D 86, 074017 (2012). doi:10.1103/PhysRevD.86.074017. arXiv:1201.6180 [hep-ph]
M.L. Mangano, Two lectures on heavy quark production in hadronic collisions in Proceedings of 137th Course of the International School of Physics ‘Enrico Fermi’, Varenna, Italy, July 8–18, 1997 (1997). arXiv:hep-ph/9711337
M. Guzzi, K. Lipka, S.-O. Moch, Top-quark pair production at hadron colliders: differential cross section and phenomenological applications with DiffTop. JHEP 1501, 082 (2015). doi:10.1007/JHEP01(2015)082. arXiv:1406.0386 [hep-ph]
R. Gauld et al., Charm production in the forward region: constraints on the small-\(x\) gluon and backgrounds for neutrino astronomy. JHEP 11, 009 (2015). doi:10.1007/JHEP11(2015)009. arXiv:1506.08025 [hep-ph]
S. Alekhin et al., Determination of strange sea quark distributions from fixed-target and collider data. Phys. Rev. D 91(9), 094002 (2015). doi:10.1103/PhysRevD.91.094002. arXiv:1404.6469 [hep-ph]
M. Klasen et al., NLO Monte Carlo predictions for heavy-quark production at the LHC: \(pp\) collisions in ALICE. JHEP 1408, 109 (2014). doi:10.1007/JHEP08(2014)109. arXiv:1405.3083 [hep-ph]
M. Gluck, J.F. Owens, E. Reya, Gluon contribution to hadronic J/psi production. Phys. Rev. D 17, 2324 (1978). doi:10.1103/PhysRevD.17.2324
B.L. Combridge, Associated production of heavy flavor states in \(pp\) and \(\bar{p}p\) interactions: some QCD estimates. Nucl. Phys. B 151, 429–456 (1979). doi:10.1016/0550-3213(79)90449-8
K. Hagiwara, T. Yoshino, Hadroproduction of heavy quark flavors in QCD. Phys. Lett. B 80, 282–285 (1979). doi:10.1016/0370-2693(79)90217-X
L.M. Jones, H.W. Wyld, On hadronic charm production by gluon fusion. Phys. Rev. D 17, 1782 (1978). doi:10.1103/PhysRevD.17.1782
H.M. Georgi et al., Charmed particles from two-gluon annihilation in proton proton collisions. Ann. Phys. 114, 273 (1978). doi:10.1016/0003-4916(78)90270-1
P. Nason, S. Dawson, R.K. Ellis, The total cross-section for the production of heavy quarks in hadronic collisions. Nucl. Phys. B 303, 607 (1988). doi:10.1016/0550-3213(88)90422-1
W. Beenakker et al., QCD corrections to heavy quark production in \(p\bar{p}\) collisions. Phys. Rev. D 40, 54–82 (1989). doi:10.1103/PhysRevD.40.54
P. Nason, S. Dawson, R.K. Ellis, The one particle inclusive differential cross-section for heavy quark production in hadronic collisions. Nucl. Phys. B 327, 49–92 (1989). doi:10.1016/0550-3213(89)90286-1
W. Beenakker et al., QCD corrections to heavy quark production in hadron–hadron collisions. Nucl. Phys. B 351, 507–560 (1991). doi:10.1016/S0550-3213(05)80032-X
R.K. Ellis, P. Nason, QCD radiative corrections to the photoproduction of heavy quarks. Nucl. Phys. B 312, 551 (1989). doi:10.1016/0550-3213(89)90571-3
J. Smith, W. van Neerven, QCD corrections to heavy flavor photoproduction and electroproduction. Nucl. Phys. B 374, 36–82 (1992). doi:10.1016/0550-3213(92)90476-R
M.L. Mangano, P. Nason, G. Ridolfi, Heavy quark correlations in hadron collisions at next-to-leading order. Nucl. Phys. B 373, 295–345 (1992). doi:10.1016/0550-3213(92)90435-E
S. Frixione et al., Heavy quark correlations in photon–hadron collisions. Nucl. Phys. B 412, 225–259 (1994). doi:10.1016/0550-3213(94)90501-0. arXiv:hep-ph/9306337
A package of FORTRAN routines for the computation of heavy quark cross sections and distributions in hadron–hadron collisions in QCD at next-to-leading order. http://www.ge.infn.it/~ridolfi/hvqlibx.tgz. Accessed 20 Feb 2017
M. Czakon, D. Heymes, A. Mitov, High-precision differential predictions for top-quark pairs at the LHC. Phys. Rev. Lett. 116(8), 082003 (2016). doi:10.1103/PhysRevLett.116.082003. arXiv:1511.00549 [hep-ph]
M. Czakon, D. Heymes, A. Mitov, Dynamical scales for multi-TeV top-pair production at the LHC. Submitted to JHEP. (2016). arXiv:1606.03350 [hep-ph]
M. Cacciari, M. Greco, P. Nason, The \(p_T\) spectrum in heavy flavor hadroproduction. JHEP 9805, 007 (1998). doi:10.1088/1126-6708/1998/05/007. arXiv:hep-ph/9803400
M. Cacciari, S. Frixione, P. Nason, The \(p_T\) spectrum in heavy flavor photoproduction. JHEP 0103, 006 (2001). doi:10.1088/1126-6708/2001/03/006. arXiv:hep-ph/0102134
M. Cacciari et al., Theoretical predictions for charm and bottom production at the LHC. JHEP 1210, 137 (2012). doi:10.1007/JHEP10(2012)137. arXiv:1205.6344 [hep-ph]
Program to calculate heavy quark transverse momentum and rapidity distributions in hadron–hadron and photon–hadron collisions. http://cacciari.web.cern.ch/cacciari/fonll. Accessed 20 Feb 2017
B. Kniehl et al., Collinear subtractions in hadroproduction of heavy quarks. Eur. Phys. J. C 41, 199–212 (2005). doi:10.1140/epjc/s2005-02200-7. arXiv:hep-ph/0502194
J. Baines et al., in Heavy Quarks (Working Group 3): Summary Report for the HERA-LHC Workshop Proceedings” (2006). arXiv:hep-ph/0601164
A.H. Mueller, Cut vertices and their renormalization: a generalization of the Wilson expansion. Phys. Rev. D 18, 3705 (1978). doi:10.1103/PhysRevD.18.3705
J.C. Collins, G.F. Sterman, Soft partons in QCD. Nucl. Phys. B 185, 172 (1981). doi:10.1016/0550-3213(81)90370-9
J.C. Collins, D.E. Soper, G.F. Sterman, Factorization for short distance hadron–hadron scattering. Nucl. Phys. B 261, 104 (1985). doi:10.1016/0550-3213(85)90565-6
J.C. Collins, D.E. Soper, G.F. Sterman, Soft gluons and factorization. Nucl. Phys. B 308, 833 (1988). doi:10.1016/0550-3213(88)90130-7
G.T. Bodwin, Factorization of the Drell–Yan cross-section in perturbation theory. Phys. Rev. D 31, 2616 (1985). doi:10.1103/PhysRevD.34.3932. doi:10.1103/PhysRevD.31.2616
B. Mele, P. Nason, The fragmentation function for heavy quarks in QCD. Nucl. Phys. B 361, 626–644 (1991). doi:10.1016/0550-3213(91)90597-Q
J. Bjorken, Properties of hadron distributions in reactions containing very heavy quarks. Phys. Rev. D 17, 171–173 (1978). doi:10.1103/PhysRevD.17.171
M. Suzuki, Fragmentation of hadrons from heavy quark partons. Phys. Lett. B 71, 139 (1977). doi:10.1016/0370-2693(77)90761-4
R. Jaffe, L. Randall, Heavy quark fragmentation into heavy mesons. Nucl. Phys. B 412, 79–105 (1994). doi:10.1016/0550-3213(94)90495-2. arXiv:hep-ph/9306201
P. Nason, B. Webber, Nonperturbative corrections to heavy quark fragmentation in \(e^+e^-\) annihilation. Phys. Lett. B 395, 355–363 (1997). doi:10.1016/S0370-2693(97)00129-9. arXiv:hep-ph/9612353
M. Cacciari, E. Gardi, Heavy quark fragmentation. Nucl. Phys. B 664, 299–340 (2003). doi:10.1016/S0550-3213(03)00435-8. arXiv:hep-ph/0301047
V. Kartvelishvili, A. Likhoded, V. Petrov, On the fragmentation functions of heavy quarks into hadrons. Phys. Lett. B 78, 615 (1978). doi:10.1016/0370-2693(78)90653-6
M. Bowler, \(e^+e^-\) production of heavy quarks in the string model. Z. Phys. C 11, 169 (1981). doi:10.1007/BF01574001
C. Peterson et al., Scaling violations in inclusive \(e^+e^-\) annihilation spectra. Phys. Rev. D 27, 105 (1983). doi:10.1103/PhysRevD.27.105
P. Collins, T. Spiller, The fragmentation of heavy quarks. J. Phys. G 11, 1289 (1985). doi:10.1088/0305-4616/11/12/006
F. Aaron et al., Study of charm fragmentation into \(D^{*\pm }\) mesons in deep-inelastic scattering at HERA. Eur. Phys. J. C 59, 589–606 (2009). doi:10.1140/epjc/s10052-008-0792-2. arXiv:0808.1003 [hep-ex]
M. Cacciari, P. Nason, Is there a significant excess in bottom hadroproduction at the Tevatron? Phys. Rev. Lett. 89, 122003 (2002). doi:10.1103/PhysRevLett.89.122003. arXiv:hep-ph/0204025
M. Klein, R. Yoshida, Collider physics at HERA. Prog. Part. Nucl. Phys. 61, 343–393 (2008). doi:10.1016/j.ppnp.2008.05.002. arXiv:0805.3334 [hep-ex]
HERA—a proposal for a large electron proton colliding beam facility at DESY. Technical report DESY-HERA-81-10 (1981)
Pictures database on the Verena Schoenberg’s ZEUS Homepage. http://www-zeus.desy.de/~vschoenb/. Accessed 20 Feb 2017
I. Abt et al., The H1 detector at HERA. Nucl. Instrum. Methods A 386, 310–347 (1997). doi:10.1016/S0168-9002(96)00893-5
ZEUS Coll., The ZEUS detector. Status report. Technical report (1993) http://www-zeus.desy.de/bluebook/bluebook.html. Accessed 20 Feb 2017
HERMES Coll., HERMES technical design report. Technical report DESY-PRC-93-06 (1993)
E.P. Hartouni et al., HERA-B: an experiment to study CP violation in the \(B\) system using an internal target at the HERA proton ring. Design report. Technical report DESY-PRC-95-01 (1995)
U. Schneekloth, The HERA luminosity upgrade. Technical report DESY-HERA-98-05 (1998)
I. Abt et al., The tracking, calorimeter and muon detectors of the H1 experiment at HERA. Nucl. Instrum. Methods A 386, 348–396 (1997). doi:10.1016/S0168-9002(96)00894-7
R. Appuhn et al., The H1 lead/scintillating fiber calorimeter. Nucl. Instrum. Methods A 386, 397–408 (1997). doi:10.1016/S0168-9002(96)01171-0
D. Pitzl et al., The H1 silicon vertex detector. Nucl. Instrum. Methods A 454, 334–349 (2000). doi:10.1016/S0168-9002(00)00488-5. arXiv:hep-ex/0002044
M. Nozicka, The forward and backward silicon trackers of H1. Nucl. Instrum. Methods A 501, 54–59 (2003). doi:10.1016/S0168-9002(02)02010-7
J. Becker et al., A vertex trigger based on cylindrical multiwire proportional chambers. Nucl. Instrum. Methods A 586, 190–203 (2008). doi:10.1016/j.nima.2007.11.024. arXiv:physics/0701002
C. Kleinwort, H1 alignment experience, in Proceedings of the First LHC Detector Alignment Workshop, CERN-2007-004, ed. by S. Blusk, et al., p. 41 (2007)
T. Wolf et al., A drift chamber track finder for the first level trigger of the H1 experiment. Nucl. Instrum. Methods A 323, 537–541 (1992). doi:10.1016/0168-9002(92)90345-5
A. Baird et al., A Fast high resolution track trigger for the H1 experiment. IEEE Trans. Nucl. Sci. 48, 1276–1285 (2001). doi:10.1109/23.958765. arXiv:hep-ex/0104010
D. Meer et al., A multifunctional processing board for the fast track trigger of the H1 experiment. IEEE Trans. Nucl. Sci. 49, 357–361 (2002). doi:10.1109/TNS.2002.1003736. arXiv:hep-ex/0107010
B. Andrieu et al., The H1 liquid argon calorimeter system. Nucl. Instrum. Methods A 336, 460–498 (1993). doi:10.1016/0168-9002(93)91257-N
B. Andrieu et al., Electron/pion separation with the H1 LAr calorimeters. Nucl. Instrum. Methods A 344, 492–506 (1994). doi:10.1016/0168-9002(94)90870-2
B. Andrieu et al., Beam tests and calibration of the H1 liquid argon calorimeter with electrons. Nucl. Instrum. Methods A 350, 57–72 (1994). doi:10.1016/0168-9002(94)91155-X
T. Nicholls et al., Performance of an electromagnetic lead/scintillating fiber calorimeter for the H1 detector. Nucl. Instrum. Methods A A374, 149–156 (1996). doi:10.1016/0168-9002(95)01443-8
H. Bethe, W. Heitler, On the stopping of fast particles and on the creation of positive electrons. Proc. R. Soc. Lond. A 146, 83–112 (1934). doi:10.1098/rspa.1934.0140
F. Aaron et al., Determination of the integrated luminosity at HERA using elastic QED Compton events. Eur. Phys. J. C 72, 2163 (2012). doi:10.1140/epjc/s10052-014-2733-6. doi:10.1140/epjc/s10052-012-2163-2. arXiv:1205.2448 [hep-ex]
R.A. Eichler, Triggering with short bunch distances: the H1 trigger at HERA as an example, in Invited talk given at 5th International Conference on Instrumentation for Colliding Beam Physics, Novosibirsk, USSR, 15–21 March 1990
E. Elsen, Aspects of the H1 trigger and data acquisition system, in Prepared for 2nd Annual Conference on Electronics for Future Colliders, Chestnut Ridge, N.Y., 19–21 May 1992
N. Harnew et al., Vertex triggering using time difference measurements in the ZEUS central tracking detector. Nucl. Instrum. Methods A 279, 290–296 (1989). doi:10.1016/0168-9002(89)91096-6
B. Foster et al., The performance of the ZEUS central tracking detector z-by-timing electronics in a transputer based data acquisition system. Nucl. Phys. Proc. Suppl. 32, 181–188 (1993). doi:10.1016/0920-5632(93)90023-Y
B. Foster et al., The design and construction of the ZEUS central tracking detector. Nucl. Instrum. Methods A 338, 254–283 (1994). doi:10.1016/0168-9002(94)91313-7
E. Acerbi et al., Thin and compensating solenoids for ZEUS detector, in Boston 1987, Proceedings, Magnet technology (1987), pp. 1354–1357
A. Polini et al., The design and performance of the ZEUS micro vertex detector. Nucl. Instrum. Methods A 581, 656–686 (2007). doi:10.1016/j.nima.2007.08.167. arXiv:0708.3011 [physics.ins-det]
S. Fourletov, Straw tube tracking detector (STT) for ZEUS. Nucl. Instrum. Methods A 535, 191–196 (2004). doi:10.1016/j.nima.2004.07.212
A. Bamberger et al., The small angle rear tracking detector of ZEUS. Nucl. Instrum. Methods A 401, 63–80 (1997). doi:10.1016/S0168-9002(97)01029-2
M. Derrick et al., Design and construction of the ZEUS barrel calorimeter. Nucl. Instrum. Methods A 309, 77–100 (1991). doi:10.1016/0168-9002(91)90094-7
A. Andresen et al., Construction and beam test of the ZEUS forward and rear calorimeter. Nucl. Instrum. Methods A 309, 101–142 (1991). doi:10.1016/0168-9002(91)90095-8
A. Caldwell et al., Design and implementation of a high precision readout system for the ZEUS calorimeter. Nucl. Instrum. Methods A 321, 356–364 (1992). doi:10.1016/0168-9002(92)90413-X
A. Bernstein et al., Beam tests of the ZEUS barrel calorimeter. Nucl. Instrum. Methods A 336, 23–52 (1993). doi:10.1016/0168-9002(93)91078-2
G. Abbiendi et al., The ZEUS barrel and rear muon detector. Nucl. Instrum. Methods 333, 342–354 (1993). doi:10.1016/0168-9002(93)91176-N
J. Andruszkow et al., Luminosity measurement in the ZEUS experiment. Acta Phys. Polon. B 32, 2025–2058 (2001)
M. Helbich et al., The spectrometer system for measuring ZEUS luminosity at HERA. Nucl. Instrum. Methods A 565, 572–588 (2006). doi:10.1016/j.nima.2006.06.049. arXiv:physics/0512153
W. Smith et al., The ZEUS calorimeter first level trigger. Nucl. Instrum. Methods A 355, 278–294 (1995). doi:10.1016/0168-9002(94)01163-X
G. Heath et al., The ZEUS first level tracking trigger. Nucl. Instrum. Methods A 315, 431–435 (1992). doi:10.1016/0168-9002(92)90741-L
A. Quadt et al., The design and performance of the ZEUS central tracking detector second level trigger. Nucl. Instrum. Methods A 438, 472–501 (1999). doi:10.1016/S0168-9002(99)00826-8
S. Bhadra et al., The ZEUS third level trigger system. Comput. Phys. Commun. 57, 321–324 (1989). doi:10.1016/0010-4655(89)90236-1
F. Aaron et al., Measurement of the charm and beauty structure functions using the H1 vertex detector at HERA. Eur. Phys. J. C 65, 89–109 (2010). doi:10.1140/epjc/s10052-009-1190-0. arXiv:0907.2643 [hep-ex]
A. Aktas et al., Production of \(D^{*\pm }\) mesons with dijets in deep-inelastic scattering at HERA. Eur. Phys. J. C 51, 271–287 (2007). doi:10.1140/epjc/s10052-007-0296-5. arXiv:hep-ex/0701023
S. Chekanov et al., Measurement of \(D^{*\pm }\) production in deep inelastic \(e^\pm p\) scattering at HERA. Phys. Rev. D 69, 012004 (2004). doi:10.1103/PhysRevD.69.012004. arXiv:hep-ex/0308068
S. Chekanov et al., Measurement of \(D^\pm \) and \(D^0\) production in deep inelastic scattering using a lifetime tag at HERA. Eur. Phys. J. C 63, 171–188 (2009). doi:10.1140/epjc/s10052-009-1088-x. arXiv:0812.3775 [hep-ex]
S. Chekanov et al., Measurement of charm and beauty production in deep inelastic ep scattering from decays into muons at HERA. Eur. Phys. J. C 65, 65–79 (2010). doi:10.1140/epjc/s10052-009-1193-x. arXiv:0904.3487 [hep-ex]
H. Abramowicz et al., Measurement of \(D^{*\pm }\) production in deep inelastic scattering at HERA. JHEP 1305, 097 (2013). doi:10.1007/JHEP05(2013)097. arXiv:1303.6578 [hep-ex]
D.E. Andrews et al., An improved upper limit for photoproduction of psi (3105) near threshold. Phys. Rev. Lett. 34, 1134–1136 (1975). doi:10.1103/PhysRevLett.34.1134
S. Nussinov, On possible effects of decays of charmed particle resonances. Phys. Rev. Lett. 35, 1672 (1975). doi:10.1103/PhysRevLett.35.1672
G. Feldman et al., Observation of the decay \(D^{*\pm }\) \(\rightarrow \) \({D^0}{\pi ^ + }\). Phys. Rev. Lett. 38, 1313 (1977). doi:10.1103/PhysRevLett.38.1313
L. Gibbons et al., The inclusive decays \(B \rightarrow DX\) and \(B \rightarrow D^\ast X\). Phys. Rev. D 56, 3783–3802 (1997). doi:10.1103/PhysRevD.56.3783. arXiv:hep-ex/9703006
R. Aaij et al., Prompt charm production in pp collisions at \(\sqrt{s} = 7 \ {\rm TeV}\). Nucl. Phys. B 871, 1–20 (2013). doi:10.1016/j.nuclphysb.2013.02.010. arXiv:1302.2864 [hep-ex]
A. Aktas et al., Measurement of \(F_2^{c\bar{c}}\) and \(F_2^{b\bar{b}}\) at high \(Q^2\) using the H1 vertex detector at HERA. Eur. Phys. J. C 40, 349–359 (2005). doi:10.1140/epjc/s2005-02154-8. arXiv:hep-ex/0411046
A. Aktas et al., Measurement of \(F_2^{c\bar{c}}\) and \(F_2^{b\bar{b}}\) at low \(Q^2\) and \(x\) using the H1 vertex detector at HERA. Eur. Phys. J. C 45, 23–33 (2006). doi:10.1140/epjc/s2005-02415-6. arXiv:hep-ex/0507081
A. Aktas et al., Inclusive production of \(D^{+}\), \(D^0\), \(D^{+}_s\) and \(D^{*+}\) mesons in deep inelastic scattering at HERA. Eur. Phys. J. C 38, 447–459 (2005). doi:10.1140/epjc/s2004-02069-x. arXiv:hep-ex/0408149
M. Lisovyi, Measurement of charm production in deep inelastic scattering using lifetime tagging for \(D^\pm \) meson decays with the ZEUS detector at HERA. Ph.D. thesis, Hamburg University (2011)
R. Kalman, A new approach to linear filtering and prediction problems. Trans. ASME J. Basic Eng. D 82, 35 (1960)
P. Avery, Applied fitting theory V: track fitting using the Kalman filter. (1992) www.phys.ufl.edu/~avery/fitting/fitting5.pdf (unpublished)
A. Verbytskyi, Production of the excited charm mesons \(D_1\) and \(D_2^ *\) at HERA. Ph.D. thesis, Hamburg University (2013)
R. Frühwirth, A. Strandlie, Track fitting with ambiguities and noise: A study of elastic tracking and nonlinear filters. Comput. Phys. Commun. 120(2-3), 197–214 (1999). doi:10.1016/S0010-4655(99)00231-3
G.M. Briskin, Diffractive dissociation in \(ep\) deep inelastic scattering. Ph.D. thesis, Tel Aviv University (1998). http://www-library.desy.de/cgi-bin/showprep.pl?desy-thesis98-036
H. Abramowicz, A. Caldwell, R. Sinkus, Neural network based electron identification in the ZEUS calorimeter. Nucl. Instrum. Methods A 365, 508–517 (1995). doi:10.1016/0168-9002(95)00612-5. arXiv:hep-ex/9505004
A. Kappes, Measurement of \({e^ - }p \rightarrow {e^ - }X\) differential cross-sections at high \(Q^2\) and of the structure function \(xF_3\) with ZEUS at HERA. Ph.D. thesis, Bonn University (2001)
F. Jacquet and A. Blondel, in Study of an \(ep\) Facility for Europe DESY, Hamburg, 2–3 April, 1979, DESY-79-48, ed. by U. Amaldi
S. Bentvelsen et al., Physics at HERA. Proceedings, Workshop, Hamburg, Germany, 29–30 October 1991, ed. by W. Buchmuller, G. Ingelman (1992), vol. 1, p. 23
K. Hoeger, Physics at HERA. Proceedings, Workshop, Hamburg, Germany, 29–30 October 1991, ed. by W. Buchmuller, G. Ingelman, (1992), vol. 1, p. 43
T. Sjostrand, L. Lonnblad, S. Mrenna, PYTHIA 6.2: Physics and manual (2001). arXiv:hep-ph/0108264
L. Lonnblad, ARIADNE version 4: a program for simulation of QCD cascades implementing the color dipole model. Comput. Phys. Commun. 71, 15–31 (1992). doi:10.1016/0010-4655(92)90068-A
H. Jung, Hard diffractive scattering in high-energy \(ep\) collisions and the Monte Carlo generator RAPGAP. Comput. Phys. Commun. 86, 147–161 (1995). doi:10.1016/0010-4655(94)00150-Z
R. Shehzadi, Measurement of beauty production in deep inelastic scattering at HERA using decays into electrons. Ph.D. thesis, Bonn University (2011)
R. Brun et al., in GEANT3, CERN-DD-EE-84-1 (1987)
A. Kwiatkowski, H. Spiesberger, H. Mohring, Heracles: an event generator for \(ep\) interactions at HERA energies including radiative processes: version 1.0. Comput. Phys. Commun. 69, 155–172 (1992). doi:10.1016/0010-4655(92)90136-M
H. Lai et al., Global QCD analysis of parton structure of the nucleon: CTEQ5 parton distributions. Eur. Phys. J. C 12, 375–392 (2000). doi:10.1007/s100529900196. arXiv:hep-ph/9903282
J. Beringer et al., Review of particle physics (RPP). Phys. Rev. D 86, 010001 (2012). doi:10.1103/PhysRevD.86.010001
F. James, M. Roos, Minuit: a system for function minimization and analysis of the parameter errors and correlations. Comput. Phys. Commun. 10, 343–367 (1975). doi:10.1016/0010-4655(75)90039-9
F. James, CERN Program Library Long Writeup D506. MINUIT Reference Manual. Version 94.1. http://root.cern.ch/sites/d35c7d8c.web.cern.ch/files/minuit.pdf. Accessed 20 Feb 2017
S. Chekanov et al., Measurement of charm and beauty production in deep inelastic \(ep\) scattering from decays into muons at HERA. Eur. Phys. J. C 65, 65–79 (2010). doi:10.1140/epjc/s10052-009-1193-x. arXiv:0904.3487 [hep-ex]
H. Abramowicz et al., Measurement of beauty production in DIS and \(F_2^{b\bar{b}}\) extraction at ZEUS. Eur. Phys. J. C 69, 347–360 (2010). doi:10.1140/epjc/s10052-010-1423-2. arXiv:1005.3396 [hep-ex]
H. Abramowicz et al., Measurement of beauty production in deep inelastic scattering at HERA using decays into electrons. Eur. Phys. J. C 71, 1573 (2011). doi:10.1140/epjc/s10052-011-1573-x. arXiv:1101.3692 [hep-ex]
O. Zenaiev, Measurement of total and differential cross sections of \(D^+\) meson production in deep inelastic scattering with the ZEUS detector at HERA. Ukrainian, MA thesis: National Taras Shevchenko University of Kyiv (2011)
V. Libov, Measurement of charm and beauty production in deep inelastic scattering at hera and test beam studies of ATLAS pixel sensors. Ph.D. thesis, Hamburg University (2012)
S. Chekanov et al., A ZEUS next-to-leading-order QCD analysis of data on deep inelastic scattering. Phys. Rev. D 67, 012007 (2003). doi:10.1103/PhysRevD.67.012007. arXiv:hep-ex/0208023
S. Chekanov et al., Measurement of the charm fragmentation function in \(D^{*\pm }\) photoproduction at HERA. JHEP 0904, 082 (2009). doi:10.1088/1126-6708/2009/04/082. arXiv:0901.1210 [hep-ex]
M. Cacciari, P. Nason, C. Oleari, A study of heavy flavored meson fragmentation functions in \(e^+e^-\) annihilation. JHEP 0604, 006 (2006). doi:10.1088/1126-6708/2006/04/006. arXiv:hep-ph/0510032
R. Seuster et al., Charm hadrons from fragmentation and \(B\) decays in \(e^+e^-\) annihilation at \(\sqrt{s} = 10.6{\rm GeV}\). Phys. Rev. D 73, 032002 (2006). doi:10.1103/PhysRevD.73.032002. arXiv:hep-ex/0506068
E. Lohrmann, A summary of charm hadron production fractions (2011). arXiv:1112.3757 [hep-ex]
A. Glazov, Averaging of DIS cross section data. AIP Conf. Proc. 792, 237–240 (2005). doi:10.1063/1.2122026
HERAverager: an averaging tool developed for the H1 and ZEUS data combination (version 0.0.2). https://wiki-zeuthen.desy.de/HERAverager. Accessed 20 Feb 2017
J. Pumplin et al., Uncertainties of predictions from parton distribution functions. 2. The Hessian method. Phys. Rev. D 65, 014013 (2001). doi:10.1103/PhysRevD.65.014013. arXiv:hep-ph/0101032
R. Barlow, Statistics: a guide to use of statistical methods in the physical sciences, in Manchester Physics Series (1989). ISBN: 978-0-471-92295-7
E.L.V. Blobel, in Statistical and Numerical Methods in Data Analysis (2012). ISBN 978-3-935702-66-9 (e-Buch). http://www-library.desy.de/preparch/books/BloLoBuch.pdf (in German)
D. Stump et al., Uncertainties of predictions from parton distribution functions. 1. The Lagrange multiplier method. Phys. Rev. D 65, 014012 (2001). doi:10.1103/PhysRevD.65.014012. arXiv:hep-ph/0101051
M. Botje, Error estimates on parton density distributions. J. Phys. G 28, 779–790 (2002). doi:10.1088/0954-3899/28/5/305. arXiv:hep-ph/0110123
S. Alekhin, J. Blumlein, S. Moch, Parton distribution functions and benchmark cross sections at NNLO. Phys. Rev. D 86, 054009 (2012). doi:10.1103/PhysRevD.86.054009. arXiv:1202.2281 [hep-ph]
A. Martin et al., Heavy-quark mass dependence in global PDF analyses and 3- and 4-flavour parton distributions. Eur. Phys. J. C 70, 51–72 (2010). doi:10.1140/epjc/s10052-010-1462-8. arXiv:1007.2624 [hep-ph]
N. Adam et al., Absolute branching fraction measurements for \(D^+\) and \(D^{0}\) inclusive semileptonic decays. Phys. Rev. Lett. 97, 251801 (2006). doi:10.1103/PhysRevLett.97.251801. arXiv:hep-ex/0604044
S. Chekanov et al., Measurement of beauty production in deep inelastic scattering at HERA. Phys. Lett. B 599, 173–189 (2004). doi:10.1016/j.physletb.2004.08.048. arXiv:hep-ex/0405069
D. Lange, The EvtGen particle decay simulation package. Nucl. Instrum. Methods A 462, 152–155 (2001). doi:10.1016/S0168-9002(01)00089-4
H. Albrecht et al., Two measurements of \(B^0 \bar{B}^0\) mixing using kaon tagging. Phys. Lett. B 374, 256–264 (1996). doi:10.1016/0370-2693(96)00206-7
P. Nason, C. Oleari, A phenomenological study of heavy quark fragmentation functions in \(e^+e^-\) annihilation. Nucl. Phys. B 565, 245–266 (2000). doi:10.1016/S0550-3213(99)00673-2. arXiv:hep-ph/9903541
S. Alekhin et al., The 3, 4, and 5-flavor NNLO Parton from Deep-Inelastic-Scattering Data and at Hadron Colliders. Phys. Rev. D 81, 014032 (2010). doi:10.1103/PhysRevD.81.014032. arXiv:0908.2766 [hep-ph]
HERAFitter: an open source QCD fit framework (version 1.0.0). https://wiki-zeuthen.desy.de/HERAFitter. Accessed 20 Feb 2017
S. Alekhin et al., HERAFitter. Eur. Phys. J. C 75(7), 304 (2015). doi:10.1140/epjc/s10052-015-3480-z. arXiv:1410.4412 [hep-ph]
S. Alekhin, OPENQCDRAD-1.5. http://www-zeuthen.desy.de/~alekhin/OPENQCDRAD/. Accessed 20 Feb 2017
A. Martin et al., Parton distributions for the LHC. Eur. Phys. J. C 63, 189–285 (2009). doi:10.1140/epjc/s10052-009-1072-5. arXiv:0901.0002 [hep-ph]
F. Aaron et al., Inclusive deep inelastic scattering at high \(Q^2\) with longitudinally polarised lepton beams at HERA. JHEP 1209, 061 (2012). doi:10.1007/JHEP09(2012)061. arXiv:1206.7007 [hep-ex]
J. Pumplin, D. Stump, W. Tung, Multivariate fitting and the error matrix in global analysis of data. Phys. Rev. D 65, 014011 (2001). doi:10.1103/PhysRevD.65.014011. arXiv:hep-ph/0008191
J. Pumplin et al., New generation of parton distributions with uncertainties from global QCD analysis. JHEP 07, 012 (2002). doi:10.1088/1126-6708/2002/07/012. arXiv:hep-ph/0201195
J. Gao, M. Guzzi, P.M. Nadolsky, Charm quark mass dependence in a global QCD analysis. Eur. Phys. J. C 73, 2541 (2013). doi:10.1140/epjc/s10052-013-2541-4. arXiv:1304.3494 [hep-ph]
S. Alekhin et al., Precise charm-quark mass from deep-inelastic scattering. Phys. Lett. B 720, 172–176 (2013). doi:10.1016/j.physletb.2013.02.010. arXiv:1212.2355 [hep-ph]
S. Alekhin, J. Blumlein, S. Moch, Parton distribution functions and benchmark cross sections at NNLO. Phys. Rev. D 86, 054009 (2012). doi:10.1103/PhysRevD.86.054009. arXiv:1202.2281 [hep-ph]
A. Accardi et al., Constraints on large-\(x\) parton distributions from new weak boson production and deep-inelastic scattering data. Phys. Rev. D 93(11), 114017 (2016). doi:10.1103/PhysRevD.93.114017. arXiv:1602.03154 [hep-ph]
S. Dulat et al., New parton distribution functions from a global analysis of quantum chromodynamics. Phys. Rev. D 93(3), 033006 (2016). doi:10.1103/PhysRevD.93.033006. arXiv:1506.07443 [hep-ph]
P. Jimenez-Delgado, E. Reya, Delineating parton distributions and the strong coupling. Phys. Rev. D 89(7), 074049 (2014). doi:10.1103/PhysRevD.89.074049. arXiv:1403.1852 [hep-ph]
L.A. Harland-Lang et al., Parton distributions in the LHC era: MMHT 2014 PDFs. Eur. Phys. J. C 75(5), 204 (2015). doi:10.1140/epjc/s10052-015-3397-6. arXiv:1412.3989 [hep-ph]
R.D. Ball et al., Parton distributions for the LHC Run II. JHEP 04, 040 (2015). doi:10.1007/JHEP04(2015)040. arXiv:1410.8849 [hep-ph]
J. Butterworth et al., PDF4LHC recommendations for LHC Run II. J. Phys. G 43, 023001 (2016). doi:10.1088/0954-3899/43/2/023001. arXiv:1510.03865 [hep-ph]
A. Accardi et al., A critical appraisal and evaluation of modern PDFs. Eur. Phys. J. C 76(8), 471 (2016). doi:10.1140/epjc/s10052-016-4285-4. arXiv:1603.08906 [hep-ph]
M. Gluck, P. Jimenez-Delgado, E. Reya, Dynamical parton distributions of the nucleon and very small-\(x\) physics. Eur. Phys. J. C 53, 355–366 (2008). doi:10.1140/epjc/s10052-007-0462-9. arXiv:0709.0614 [hep-ph]
R.D. Ball et al., Impact of heavy quark masses on parton distributions and LHC phenomenology. Nucl. Phys. B 849, 296–363 (2011). doi:10.1016/j.nuclphysb.2011.03.021. arXiv:1101.1300 [hep-ph]
V. Bertone, S. Carrazza, J. Rojo, APFEL: a PDF evolution library with QED corrections. Comput. Phys. Commun. 185, 1647–1668 (2014). doi:10.1016/j.cpc.2014.03.007. arXiv:1310.1394 [hep-ph]
R. Aaij et al., Measurement of B meson production cross-sections in proton–proton collisions at \(\sqrt{s} = 7 \ {\rm GeV}\). JHEP 1308, 117 (2013). doi:10.1007/JHEP08(2013)117. arXiv:1306.3663
R. Aaij et al., Measurements of prompt charm production cross-sections in \(pp\) collisions at \(\sqrt{s} = 13\,{\rm GeV}\). JHEP 03, 159 (2016). doi:10.1007/JHEP03(2016)159. arXiv:1510.01707 [hep-ex]
R. Aaij et al., Measurements of prompt charm production cross-sections in pp collisions at \(\sqrt{s} = 5\,{\rm GeV}\). Submitted to JHEP (2016). arXiv:1610.02230 [hep-ex]
G. Aad et al., Measurement of \(D^{*\pm }, D^\pm \) and \(D_s^ \pm \) meson production cross sections in pp collisions at \(\sqrt{s} = 7 \ {\rm TeV}\) with the ATLAS detector. Nucl. Phys. B 907, 717–763 (2016). doi:10.1016/j.nuclphysb.2016.04.032. arXiv:1512.02913 [hep-ex]
B. Abelev et al., Measurement of charm production at central rapidity in proton–proton collisions at \(\sqrt{s} = 7~{\rm TeV}\). JHEP 1201, 128 (2012). doi:10.1007/JHEP01(2012)128. arXiv:1111.1553 [hep-ex]
B. Abelev et al., \(D_s^ \pm \) meson production at central rapidity in proton–proton collisions at \(\sqrt{s} = 7~{\rm TeV}\). Phys. Lett. B 718, 279–294 (2012). doi:10.1016/j.physletb.2012.10.049. arXiv:1208.1948 [hep-ex]
B. Abelev et al., Measurement of charm production at central rapidity in proton-proton collisions at \(\sqrt{s} = 2.76 \ {\rm TeV}\). JHEP 07, 191 (2012). doi:10.1007/JHEP07(2012)191. arXiv:1205.4007 [hep-ex]
J. Adam et al., D-meson production in \(p\)-Pb collisions at \(\sqrt{s_{NN}} = 5.02 \,{\rm TeV}\) and in \(pp\) collisions at \(\sqrt{s} = 7~{\rm TeV}\). Phys. Rev. C 94(5), 054908 (2016). arXiv:1605.07569 [nucl-ex]
L.R. Evans, P. Bryant, LHC machine. J. Instrum. 3, 164.(2008). doi:10.1088/1748-0221/3/08/S08001 (this report is an abridged version of the LHC Design Report (CERN-2004-003) S08001)
J. Alves, A. Augusto et al., The LHCb Detector at the LHC. J. Instrum. (2008). doi:10.1088/1748-0221/3/08/S08005 (3. LHCb-DP-2008-001, CERN-LHCb-DP-2008-001, also published by CERN Geneva in 2010 S08005)
M. Adinolfi et al., Performance of the LHCb RICH detector at the LHC. Eur. Phys. J. C 73, 2431 (2013). doi:10.1140/epjc/s10052-013-2431-9. arXiv:1211.6759 [physics.ins-det]
M. Cacciari, P. Nason, Charm cross-sections for the Tevatron Run II. JHEP 0309, 006 (2003). doi:10.1088/1126-6708/2003/09/006. arXiv:hep-ph/0306212
B.A. Kniehl et al., Inclusive \(D^{*\pm }\) production in \(p\bar{p}\) collisions with massive charm quarks. Phys. Rev. D 71, 014018 (2005). doi:10.1103/PhysRevD.71.014018. arXiv:hep-ph/0410289
B.A. Kniehl, G. Kramer, \(D^0\), \(D^{+}\), \(D^{+}_s\), and \(\Lambda ^{+}_c\) fragmentation functions from CERN LEP1. Phys. Rev. D 71, 094013 (2005). doi:10.1103/PhysRevD.71.094013. arXiv:hep-ph/0504058
B.A. Kniehl et al., Reconciling open charm production at the Fermilab Tevatron with QCD. Phys. Rev. Lett. 96, 012001 (2006). doi:10.1103/PhysRevLett.96.012001. arXiv:hep-ph/0508129
T. Kneesch et al., Charmed-meson fragmentation functions with finite-mass corrections. Nucl. Phys. B 799, 34–59 (2008). doi:10.1016/j.nuclphysb.2008.02.015. arXiv:0712.0481 [hep-ph]
B.A. Kniehl et al., Open charm hadroproduction and the charm content of the proton. Phys. Rev. D 79, 094009 (2009). doi:10.1103/PhysRevD.79.094009. arXiv:0901.4130 [hep-ph]
B.A. Kniehl et al., Inclusive charmed-meson production at the CERN LHC. Eur. Phys. J. C 72, 2082 (2012). doi:10.1140/epjc/s10052-012-2082-2. arXiv:1202.0439 [hep-ph]
M. Cacciari, M. Greco, \(D^{*}\) production from \(e^+e^-\) to ep collisions in NLO QCD. Phys. Rev. D 55, 7134–7143 (1997). doi:10.1103/PhysRevD.55.7134. arXiv:hep-ph/9702389
M. Lisovyi, A. Verbytskyi, O. Zenaiev, Combined analysis of charm-quark fragmentation-fraction measurements. Eur. Phys. J. C 76(7), 397 (2016). doi:10.1140/epjc/s10052-016-4246-y. arXiv:1509.01061 [hep-ex]
The Fortran-based package, which allows the user to calculate the differential and total cross section for heavy-quark pair production at hadron colliders in one-particle inclusive kinematics. http://difftop.hepforge.org/. Accessed 20 Feb 2017
M.V. Garzelli, S. Moch, G. Sigl, Lepton fluxes from atmospheric charm revisited. JHEP 10, 115 (2015). doi:10.1007/JHEP10(2015)115. arXiv:1507.01570 [hep-ph]
A. Bhattacharya et al., Prompt atmospheric neutrino fluxes: perturbative QCD models and nuclear effects. JHEP 1611, 167 (2016). arXiv:1607.00193 [hep-ph]
R. Gauld et al., The prompt atmospheric neutrino flux in the light of LHCb. JHEP 02, 130 (2016). doi:10.1007/JHEP02(2016)130. arXiv:1511.06346 [hep-ph]
M.V. Garzelli et al., Prompt neutrino fluxes in the atmosphere with PROSA parton distribution functions. Submitted to JHEP (2016). arXiv:1611.03815 [hep-ph]
F. Aaron et al., Measurement of the inclusive \(ep\) scattering cross section at low \(Q^2\) and \(x\) at HERA. Eur. Phys. J. C 63, 625–678 (2009). doi:10.1140/epjc/s10052-009-1128-6. arXiv:0904.0929 [hep-ex]
P. Belov, Combination of the H1 and ZEUS inclusive cross-section measurements at proton beam energies of 460 GeV and 575 GeV and tests of low Bjorken-\(x\) phenomenological models. Ph.D. thesis, Hamburg University (2013)
D. Nicholass, The study of \(D^\pm \) and \(D^0\) meson production in deep inelastic scattering at HERA II with the ZEUS detector. Ph.D. thesis, University Coll. London (2008). doi:10.3204/DESY-THESIS-2008-046
V. Radescu, Combination and QCD analysis of the HERA inclusive cross sections. PoS ICHEP2010, 168 (2010). http://www.desy.de/h1zeus/combined_results/index.php?do=proton_structure
R.D. Ball et al., Unbiased global determination of parton distributions and their uncertainties at NNLO and at LO. Nucl. Phys. B 855, 153–221 (2012). doi:10.1016/j.nuclphysb.2011.09.024. arXiv:1107.2652 [hep-ph]
H.-L. Lai et al., New parton distributions for collider physics. Phys. Rev. D 82, 074024 (2010). doi:10.1103/PhysRevD.82.074024. arXiv:1007.2241 [hep-ph]
P. Nadolsky et al., Progress in CTEQ-TEA PDF analysis. in Proceedings of 20th International Workshop on Deep-Inelastic Scattering and Related Subjects (DIS 2012): Bonn, Germany, March 26–30, 2012 (2012), doi:10.3204/DESY-PROC-2012-02/301. arXiv:1206.3321 [hep-ph]
T. Kluge, K. Rabbertz, M. Wobisch, FastNLO: Fast pQCD calculations for PDF fits. in Proceedings, 14th International Workshop on Deep inelastic scattering (DIS 2006). Tsukuba, Japan, April 20–24, 2006 (2006). arXiv:hep-ph/0609285
M. Wobisch et al., Theory-data comparisons for jet measurements in hadron-induced processes (2011). arXiv:1109.1310 [hep-ph]
D. Britzger et al., New features in version 2 of the fastNLO project. in Proceedings, XX. International Workshop on Deep-Inelastic Scattering and Related Subjects (DIS 2012). Bonn, Germany, March 26–30, 2012 (2012). doi:10.3204/DESY-PROC-2012-02/165. arXiv:1208.3641 [hep-ph]
T. Carli et al., A posteriori inclusion of parton density functions in NLO QCD final-state calculations at hadron colliders: The APPLGRID Project. Eur. Phys. J. C 66, 503–524 (2010). doi:10.1140/epjc/s10052-010-1255-0. arXiv:0911.2985 [hep-ph]
V. Bertone et al., aMCfast: automation of fast NLO computations for PDF fits. JHEP 1408, 166 (2014). doi:10.1007/JHEP08(2014)166. arXiv:1406.7693 [hep-ph]
G.P. Lepage, A new algorithm for adaptive multidimensional integration. J. Comput. Phys. 27, 192 (1978). doi:10.1016/0021-9991(78)90004-9
E. Braaten et al., Perturbative QCD fragmentation functions as a model for heavy quark fragmentation. Phys. Rev. D 51, 4819–4829 (1995). doi:10.1103/PhysRevD.51.4819. arXiv:hep-ph/9409316
Acknowledgements
I would like to thank Dieter Haidt for the initiative to elaborate on my Ph.D. thesis and his invaluable help in the preparation of the review. I thank my Ph.D. supervisor Achim Geiser for several years of exciting collaboration, achieving the results described in this document. It is my pleasure to thank all members of ZEUS, H1 and PROSA Collaborations with whom I worked during these years.
Author information
Authors and Affiliations
Corresponding author
Appendices
Appendix A: Measurement of \(D^{+}\) production: additional information
In this appendix additional information on the measurement of \(D^{+}\) production (see Sect. 5) is provided.
Figure 76 shows purity as a function of \(p_T(D^{+})\), \(\eta (D^{+})\), \(Q^2\) and y.
Figure 77 shows efficiency as a function of \(p_T(D^{+})\), \(\eta (D^{+})\), \(Q^2\) and y.
Figure 78 shows control plots for \(E_e^{\prime }\), polar angle of the scattered electron, x, \(\delta _\mathrm{had}\) and \(Z_\mathrm{vtx}\).
Figure 79 shows effect of the tracking-inefficiency correction as a function of \(p_T(D^{+})\), \(\eta (D^{+})\), \(Q^2\) and y
Appendix B: Combination procedure: additional details
In this appendix additional information on the combination procedure (Sect. 6.2) is provided.
1.1 B.1. Minimisation method
The minimisation method described below [272, 273] is applicable if the uncertainties of the measurements do not depend on the central values (the additive treatment); in the case of the multiplicative treatment this method is extended with an iteration procedure described in Sect. B.2. In this case the \(\chi ^{2}\)-function (6.2) can be considered. Since \(\chi ^{2}\) in (6.2) is a quadratic form of \(\mathbf {m}\) and \(\mathbf {b}\), it may be rearranged such that it takes a simpler form. To show this explicitly, \(\chi ^{2}\) can be written as a Taylor series up to its second derivatives near the minimum, \((\mathbf {m_0},\mathbf {b_0})\):
The notation \(\left. \right| _{0}\) indicates that the expression is evaluated at \(\mathbf {m}=\mathbf {m_0}\), \(\mathbf {b}=\mathbf {b_0}\). Note that this is an exact expression, because \(\chi ^{2}\) is a quadratic form; moreover, the second derivatives are constant, i.e. \(\left. \frac{\partial ^2 \chi ^{2}}{\partial \mathbf {m}^2}\right| _{0}=\frac{\partial ^2 \chi ^{2}}{\partial \mathbf {m}^2}\), \(\left. \frac{\partial ^2 \chi ^{2}}{\partial \mathbf {b}^2}\right| _{0}=\frac{\partial ^2 \chi ^{2}}{\partial \mathbf {b}^2}\), \(\left. \frac{\partial ^2 \chi ^{2}}{\partial \mathbf {m} \partial \mathbf {b}}\right| _{0}=\frac{\partial ^2 \chi ^{2}}{\partial \mathbf {m} \partial \mathbf {b}}\).
It is useful to give explicit expressions for the second derivatives and to introduce the following matrix notations:
where \(\delta _{ij}\) is the Kronecker delta.
The minimum \(\chi ^{2} _\mathrm{min}=\left. \chi ^{2} \right| _{0}\) is found by solving a system of linear equations:
where
The system of linear equation (9.3) can be written in the form of a matrix equation:
Although solving of this system can be performed directly by inversion of the whole matrix, it is more convenient to take an advantage of the diagonal structure of the block \(\mathbf {A_M}\) and solve the system using the method of the Schur complement:
where
This method benefits from the fact that the only non-trivial inversion to be performed is the inversion of the block \(\mathbf {A_S^{\prime }}\). The size of this block is \(N_s \times N_s\) and usually much smaller than the total size of the system (9.5), \((N_m+N_s) \times (N_m+N_s)\), therefore this method is preferable for computation.
Obtained solution (\(\mathbf {m_0}\),\(\mathbf {b_0}\)) solves the minimisation problem for the central values. To find the uncertainties on (\(\mathbf {m_0}\),\(\mathbf {b_0}\)), the \(\chi ^{2} \) expansion in Eq. (9.1) can be written, taking into account that (\(\mathbf {m_0}\),\(\mathbf {b_0}\)) is its minimum,
Denoting \(\mathbf {m}-\mathbf {m_0}={\tilde{\mathbf {m}}}\), \(\mathbf {b}-\mathbf {b_0}={\tilde{\mathbf {b}}}\):
To separate contributions from \({\tilde{\mathbf {m}}}\) and \({\tilde{\mathbf {b}}}\) in the term \(2\langle {{\tilde{\mathbf {m}}}|\mathbf {A_{SM}}|{\tilde{\mathbf {b}}}}\rangle \), introduce a variable substitution \(\vert {{\tilde{\mathbf {m}}}^{\prime }}\rangle =\vert {{\tilde{\mathbf {m}}}}\rangle -\mathbf {X}\vert {{\tilde{\mathbf {b}}}}\rangle \):
thus choosing \(\mathbf {X}=-\mathbf {A_M}^{-1}\mathbf {A_{SM}}\):
Here \(\mathbf {A_M}=\mathbf {({A_M})}^T\), \(\mathbf {A_M}^{-1}=\mathbf {({A_M}}^{-1})^T\) were used.
Equation (9.11) allows for an interpretation of the matrices \(\mathbf {A_M}\) and \(\mathbf {A_S^{\prime }}\) in terms of uncertainties on \({\tilde{\mathbf {m}}}\) and \({\tilde{\mathbf {b}}}\). Since variation of \(\chi ^{2}\)-function of 1 corresponds to one standard deviation, diagonal elements of matrix \(\mathbf {A_M}\) gives the uncertainty on \({\tilde{\mathbf {m}}}^{\prime }\) and therefore the uncorrelated uncertainty on \(\mathbf {m_0}\):
and diagonal elements of matrix \(\mathbf {A_S^{\prime }}\) gives the uncertainties on the fitted values of the nuisance parameter \(\mathbf {b_0}\):
which are also referred to as the reduction factors of correlated uncertainties. Propagating them to \(\vert {{\tilde{\mathbf {m}}}}\rangle =\vert {{\tilde{\mathbf {m}}}^{\prime }}\rangle +\mathbf {X}\vert {{\tilde{\mathbf {b}}}}\rangle \) gives the correlated uncertainties on \(\mathbf {m_0}\):
In Eq. (9.11) variables \({\tilde{\mathbf {b}}}\) are still mixed because of the non-diagonal structure of matrix \(\mathbf {A_S^{\prime }}\), so the correlated uncertainties \(\delta ^{\mathrm{cor}~j} {{m_0}_i}\) are not independent. It is possible to decompose them, diagonilising this matrix
and introducing new independent (diagonalised) correlated error sources, \(\tilde{b^{\prime }}\):
Here \(\mathbf {U}\) is an orthogonal matrix, composed of the eigenvectors of \(\mathbf {A_S^{\prime }}\), and \(\mathbf {D}\) is a diagonal matrix, composed of the corresponding square roots of eigenvalues. Using (9.15) and (9.16), the \(\chi ^{2}\)-function from Eq. (9.11) can be written as
where \(\mathbf {{I}}\) is the unit matrix. Thus diagonalised correlated uncertainty sources are independent variables distributed according to the unit Gaussian distribution around zero. Propagating them to \(\mathbf {m}=\mathbf {m^{\prime }}+{\mathbf {X}\tilde{\mathbf{b}}}\) gives the correlated uncertainties on \(\mathbf {m_0}\):
Summarising results of (9.12) and (9.18), averaged quantities can be written as
with \(a_i\) and \(b_j\) being independently distributed according to the unit Gaussian distribution around zero.
1.2 B.2. Iterative procedure
If some of the uncertainties are treated multiplicatively, the extremum conditions (9.3) do not produce a system of linear equations, since \(\varGamma _i^{e,j}\) are functions of the unknown \(\mathbf {m_0}\). In this case the averaging technique described in Sect. 1 still can be used, but the average has to be found in an iterative procedure [272, 273]: first equation (6.2) is used to get an initial approximation for \({\mathbf {m_0}}\) and \({\mathbf {b_0}}\), which are used to recalculate the uncertainties as \(\varGamma _i^{e,j}=\gamma _i^{e,j}{{m_0}_i}\) and \({\sigma _i^e}^2={\delta _{i,\mathrm{stat}}^e}^2{{m_0}_i}^2+{\delta _{i,\mathrm{uncor}}^e}^2{{m_0}_i}^2\). Then the determination of \({{m_0}_i}\) is repeated. Typically convergence is observed after two iterations and the iteration procedure is terminated.
Note that this iterative procedure does not give the exact minimum of the \(\chi ^{2}\)-function (6.6). Although there are arguments [227, 231] that the exact minimum of (6.6) is biased, while the iterative procedure described above gives an unbiased result.
Appendix C: Combination of visible \(D^{*+}\) cross sections: additional information
In this appendix additional information on the combination of the visible \(D^{*+}\) cross sections (see Sect. 6.4) is provided.
Table 17 provides information on the fitted nuisance parameters.
The combined data with all correlations are provided in Tables 18 and 19.
Figures 80, 81, 82, 83 and 84 show a comparison of the combined data to the individual theoretical variations (see Sect. 6.4.1).
Figure 85 shows a comparison of the combined data to the theoretical variations obtained with different PDFs (see Sect. 6.3).
Appendix D: Combination of reduced charm cross sections
In this appendix additional information on the combination of the reduced charm cross sections (see Sect. 6.5) is provided. Section D.1 presents a comparison with the theoretical predictions in different VFNS and a determination of optimal c-quark mass parameters for these schemes.
1.1 D.1. Additional tables and plots
Table 20 provides information on the fitted nuisance parameters.
The combined data with all correlations are provided in Table 21.
Figures 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96 and 97). show the combined data with the input measurements for individual values of \(Q^2\).
1.2 D.2. Comparison to theoretical predictions and QCD analysis in VFNS
In Figs 98 and 99 the combined cross sections are compared with predictions of the MSTW group in the GM-VFNS at NLO and NNLO, respectively, using the RT-standard [21, 230] and the RT-optimised [79] interpolation procedure of the cross section at the charm-production threshold. At NLO, the optimised prediction tends to describe the data better than the standard one at lower \(Q^2\). The description of the data is improved at NNLO compared to NLO.
In Fig. 100 the data are compared to the NLO predictions based on HERAPDF1.5 [275] extracted in the RT-standard scheme using as inputs the published HERA-I [2] and the preliminary HERA-II combined inclusive DIS data. For the central PDF set a c-quark mass parameter \(M_c =1.4\) GeV is used. The uncertainty bands of the predictions reflect the full uncertainties on the HERAPDF1.5 set. They are dominated by the uncertainty on \(M_c\) which is varied between 1.35 and 1.65 GeV [2]. Within these uncertainties the HERAPDF1.5 predictions describe the data well. The central predictions are very similar to those of the MSTW group for the same scheme.
In Fig. 101 the data are compared to the predictions in the GM-VFNS by the NNPDF Collaboration. Both the NNPDF FONLL-A [22] and the FONLL-B [245, 276] predictions describe the data fairly well at higher \(Q^2\), while they fail to describe the data at lower \(Q^2\). The description of the data at lower \(Q^2\) is improved in the FONLL-C [245, 276] scheme.
In Fig. 102 the data are compared to the predictions in the GM-VFNS by the CTEQ Collaboration. The CT predictions [277, 278] are based on the S-ACOT-\(\chi \) heavy-quark scheme. The NLO prediction, which is very similar to the FONLL-A scheme, describes the data well for \(Q^2>5\) GeV\(^2\) but fails to describe the data at lower \(Q^2\). Similar to the FONNL-C case, the description of the data improves significantly at NNLO.
In summary, conclusions similar to [60] can be drawn. The best description of the data is achieved by the predictions including partial \(O(\alpha _s^3)\) corrections (MSTW NNLO), however, they do not fully describe the \(Q^2\) slope of the data at low \(Q^2\) (\(2.5<Q^2<5.0~\)GeV\(^2\)). The predictions including \(O(\alpha _s^2)\) terms in all parts of the calculation (NNPDF FONLL-C, CT NNLO) as well as the MSTW NLO optimal scheme also agree with the data reasonably well. The largest deviations are observed for predictions based on \(O(\alpha _s)\) terms only (NNPDF FONLL-A and CT NLO). As investigated below, further differences can be partially explained by the different choices for the value of the respective c-quark mass parameter \(M_c\).
Similar to the extraction of the c-quark mass in the FFNS, described in Sect. 6.5.3, the combined charm data were used to determine the effective parameters of the individual VFNS.
The following implementations of the VFNS were considered: ACOT full [15, 16] as used for the CTEQHQ releases of PDFs; S-ACOT-\(\chi \) [18,19,20] as used for the latest CTEQ releases of PDFs, and for the FONLL-A scheme [22] used by NNPDF; the RT-standard scheme [21, 230] as used for the MRST and MSTW releases of PDFs, as well as the RT-optimised scheme providing a smoother behaviour across thresholds [79]. The ZM-VFNS as implemented by the CTEQ group [15, 16] was also used for comparison. In all schemes, the onset of the heavy-quark PDFs is controlled by the parameter \(M_c\), in addition to the kinematic constraints.
The fitting procedure was the same as in the FFNS fit, described in Sect. 6.5.3, except:
-
since most of the considered VFNS at \(O(\alpha _s^2)\) fail to describe the \(Q^2\) slope of the data in the range of \(2.5<Q^2<{5.0}~{\mathrm{GeV}^2}\), the first \(Q^2\) bin was excluded from the fit;
-
the strong coupling constant was chosen \(\alpha _s^{n_f=5}(M_Z)=0.1176 \pm 0.0020\);
-
the renormalisation and factorisation scales for the heavy quarks were set to \(\mu _f=\mu _r=Q\) and not varied, since it is not technically possible in the framework;
-
the preferred mass parameters were obtained from the scan, since the implementation of the calculations does not allow for their changes in the PDF fitting procedure. The step size \({0.01}~\mathrm{GeV}\) was used.
In Fig. 103 the \(\chi ^{2} \) values as a function of \(M_c\) are shown for all schemes considered. Similar minimal \(\chi ^2\)-values are observed for the different schemes, albeit at quite different optimal values of the charm-mass parameter, \(M_c^\mathrm{opt}\). In the cases of the ACOT full and S-ACOT-\(\chi \) schemes the dependence of \(\chi ^{2}\) on \(M_c\) has small discontinuities since these schemes are implemented using K-factors.Footnote 75 A smooth curve can be obtained by fitting the points with a parabolic function, although this will not significantly change the preferred \(M_c^\mathrm{opt}\) values.
In Table 22 the resulting values of \(M_c^\mathrm{opt}\) are given together with the uncertainties and the \(\chi ^{2}/n_{\text {dof}}\) values; for comparison the ‘HERA 2012’ results are also given. For ACOT full and S-ACOT-\(\chi \) schemes the uncertainties are not evaluated, since due to the present discontinuities in the \(\chi ^{2}\) curves they can be misleading. The RT-optimised scheme yields the best global \(\chi ^2\). The fit in the S-ACOT-\(\chi \) scheme results in a very low value of \(M_c^\mathrm{opt}\) as compared to the other schemes. In general the predictions of the different schemes become very similar for \(Q^2 \ge {5}~{\mathrm{GeV}^2}\) and describe the data well, once the charm-mass parameters are set to the preferred values. Note that even the ZM-VFNS, which includes mass effects only indirectly [15, 16], yields a reasonably good description of the combined charm data for \(Q^2 \ge 5\) GeV\(^2\) (although it predicts a zero cross section in the lowest \(Q^2\) bin), however, \(\sim \)20 units of \(\chi ^{2}\) worse than the other schemes.
Similar to the fit in the FFNS, all fitted \(M_c^\mathrm{opt}\) values are consistent with those which have been determined in the previous analysis [60] with the ‘HERA 2012’ combined data. Those variants, for which the uncertainties are determined, exhibit improved precision.
Using different charm-mass parameters adjusted to the HERA data allows for a reduction of the theoretical uncertainty due to the choice of the heavy-flavour scheme for \(W^{\pm }\) and Z production at the LHC, as was demonstrated in [60].
Appendix E: PDF fit with LHCb heavy-flavour data: additional information
In this appendix additional information on the PDF fit with the LHCb heavy-flavour data (Sect. 8) is provided.
1.1 E.1. MNR calculations in HERAFitter: details of implementation
A PDF fit in the framework described in Sect. 8.1.1 typically requires several thousands of iterations to converge. In each iteration the theoretical predictions for each dataset must be recomputed. Since computation of the NLO predictions is usually very time consuming, this requires a “smart” implementation of the calculations with separating the bottleneck parts from the iterative procedure. Another popular solution is to use “fast” techniques, such as K-factors or precomputed perturbative grids (see, e.g. [279,280,281,282,283]). Although “fast” techniques are widely used by modern PDF groups, they usually have shortcomings, since they do not allow changing parameters of the calculations, like the factorisation and renormalisation scales or heavy-quark masses.
The MNR calculations (one-particle inclusive variant) as implemented originally in the FORTRAN code [98] require about several hours to calculate one set of the predictions for one of the considered LHCb datasets.Footnote 76 Numerical multi-dimensional integration over the phase space is done with the MC method using the VEGAS algorithm [284]. The main advantage of the MC integration is that it can be suitably performed for any configuration of the phase space; the only number to be adjusted to reach the desired accuracy is the total number of iterations. The disadvantage is that all parts of the calculations have to be repeated in each iteration.
Therefore in HERAFitter numerical multi-dimensional integration for the MNR calculations was implemented as nested loops using the trapezoidal rule for each one-dimensional integration. This allows for separation of the most time consuming parts in the top loop(s). The one-particle inclusive variant of the calculations was used. All flexibility of the original MNR code was retained: the factorisation and renormalisation scales, heavy-quark mass, strong coupling constant, fragmentation function and PDFs may be changed in each iteration (in other words, may be treated as fit parameters). The typical timing to calculate one set of the predictions for the considered LHCb datasets is \(\sim \)1 s and the inaccuracy of the predictions is less than 1% comparing to the results obtained with the original MNR code. This allows a PDF fit with these data to converge typically within a few hours. Additionally the results were cross checked with the NLO predictions as calculated by the (semi-) independent FONLL program, using the public web interface [104],Footnote 77 and differences were found to be within 1–3%.
However, note that the integration loops were adjusted for this particular configuration; another phase space and/or binning will need their readjustment.
1.2 E.2. Study of charm fragmentation function
In the ‘LHCb Abs’ fit the following tendency was observed: the LHCb charm data prefer a harder fragmentation function than was measured at HERA, since the variation of \(\alpha _k\) to upper values results in better \(\chi ^{2}\). This can be seen even from the nominal fit: predictions for the bins \(1<p_T<{3}~\mathrm{GeV}\) are on average above the data, while the bins with higher \(p_T\) are below; this non-perfect description of the \(p_T\) shape actually explains the somewhat large \(\chi ^{2} \) values for the LHCb charm datasets in Table 15.
In order to investigate this further the fragmentation-function parameter for charm was released in the fit. The fit converged to a very large \(\alpha _k\) value which corresponds to an almost \(z \simeq 1\) parton to hadron transition. Another check was performed by using the BCFY fragmentation function [285] with \(r=0.1\) extracted from \(e^{+}e^{-}\) colliders within the FONLL approach [209], which corresponds approximately to \(\alpha _k=12\). A much better description of the charm data was found than with the fragmentation function derived from the HERA data. This study qualitatively confirms the recipe for heavy-flavour fragmentation provided in [106]: since FONLL resummations of NLL provide evolution of the perturbative part of the fragmentation function to the scale \(\sim m_Q\), with NLO QCD predictions for hadro- and electroproduction of heavy flavours for the \(p_T\) region close to the threshold it would be more appropriate to use a fragmentation function extracted at FONLL (e.g. those from \(e^{+}e^{-}\) at the \(Z^0\) resonance), while for the high-\(p_T\) region it is more appropriate to use a fragmentation function extracted at the NLO approach. However, such a study was beyond the scope, so the QCD analysis was limited to the usage of the fragmentation function measured at HERA.
For beauty no tendencies were observed: the LHCb data clearly prefer the value \(\alpha _k \approx 11\) similar to that extracted from the LEP data.
1.3 E.3. Additional tables and plots
Figures 104, 105 and 106 show individual contributions to the uncertainties for the distributions at \(Q^2={100}~{\mathrm{GeV}^2}\), obtained in the ‘HERA-only’, ‘LHCb Abs’ and ‘LHCb Norm’ fits.
Figures 107 and 108 show the PDFs and their relative uncertainties at the scale \(Q^2={100}~{\mathrm{GeV}^2}\) obtained in the ‘HERA-only’, ‘LHCb Abs’ and ‘LHCb Norm’ fits.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Funded by SCOAP3
About this article
Cite this article
Zenaiev, O. Charm production and QCD analysis at HERA and LHC. Eur. Phys. J. C 77, 151 (2017). https://doi.org/10.1140/epjc/s10052-017-4620-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1140/epjc/s10052-017-4620-4