Abstract
This study aimed at obtaining empirical evidence regarding the influence of strategic entrepreneurship on SMEs’ performance under the mediation of competitive advantage in the welding industry in Tanzania. Guided by the resource-based theory, this study adopted learning orientation, strategic resource management, and entrepreneurial orientation as strategic entrepreneurship components. Survey method with cross-sectional design was used to collect data from 300 owners-managers of welding industry SMEs located in Dar es Salaam, Morogoro, and Mbeya urban centers. Structural equation modelling technique was used to develop measurement and structural models. Findings suggest that learning orientation influences entrepreneurial orientation which influences strategic resource management to create competitive advantage that promotes SMEs’ performance. Findings of this study imply that the resource-based theory holds a better chance to describe the influence of strategic entrepreneurship components on SMEs’ performance under the mediation of competitive advantage than the individual resource-based view and knowledge-based view. It has been empirically demonstrated that knowledge is a unique resource that enables the acquisition of other resources and strategies. SMEs are urged to embrace learning orientation to create competitive advantage that leads to superior performance. The study has empirically verified that learning orientation, strategic resource management, and entrepreneurial orientation constructs adopted from entrepreneurship and strategic management literature are components of strategic entrepreneurship. Inclusion of strategic entrepreneurship components, competitive advantage, and SMEs’ performance with their composite measures in a single model distinguishes this study from past studies.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
The Tanzania Development Vision 2025 targets inter alia creation of a strong and competitive economy by developing a mind-set which nurtures entrepreneurial culture through creative and innovative hard work, and improving societal learning to create capabilities that enable individuals and organizations to respond to threats and exploit opportunities for wealth creation (United Republic of Tanzania [URT], 1999). The Small and Medium Enterprises Development Policy 2003 aims at the establishment of new SMEs and improving the performance and competitiveness of the existing ones (United Republic of Tanzania [URT], 2003).
However, performance of Tanzanian SMEs for a long time has been poor leading to the closure of business and thus suppressing the potential benefits of SMEs to the socio-economic development of the entrepreneurs and the nation at large. Lack of entrepreneurial culture has been identified as one of the critical problems facing SMEs in Tanzania (Mashenene & Rumanyika, 2014; Kazimoto, 2014).
According to Isaga (2012), several interventions have been put in place to support the growth of SMEs in Tanzania, such interventions include establishment of Small Industries Development Organization in 1973, establishment of Vocational Education Training Authority in 1994, establishment of the University of Dar es Salaam entrepreneurship center in 2001, development of SME policy in 2003, establishment of SME department in the ministry responsible for industry and trade in 2003, and establishment of SME credit guarantee scheme managed by the Bank of Tanzania in 2005. Commissioning of National SMEs Baseline Survey in 2010 to 2012 is another intervention that aimed at improving SMEs’ performance (United Republic of Tanzania [URT], 2012).
Despite the interventions, performance of SMEs has continued to deteriorate and closure of businesses has remained high. For example, 2 years before the National Baseline Survey, the percentages of SMEs which closed businesses were 31.4% in Dar es Salaam city, 24.9% in other urban centers, 13.6% in rural areas, 55.5% in Zanzibar, and on average 18.1% countrywide (URT, 2012). Prevalence of the problem has also been reflected in Mwapachu (2012) who argued that the high mortality rate of SMEs hinders the provision of loans from financial institutions in developing countries like Tanzania.
Literature has shown that entrepreneurial culture may be promoted through the adoption of strategic entrepreneurship approach, the synergy of entrepreneurship, and strategic management which involves both opportunity-seeking and advantage-seeking actions (Dogan, 2015; Hitt et al., 2001, Kraus & Kauraren, 2009). Based on extensive literature review, this study adopted learning orientation, strategic resource management, and entrepreneurial orientation as components of strategic entrepreneurship (Ireland et al., 2003; Herath & Mahmood, 2013; Chai & Sa, 2016) and competitive advantage was adopted as a mediating variable (Mahmood & Hanafi, 2013a; Mahmood & Hanafi, 2013b).
This study employed quantitative research paradigm with cross-sectional design to determine the extent strategic entrepreneurship influences SMEs’ performance under the mediation of competitive advantage in the welding industry in Tanzania. Specifically, this study intended to (1) determine the influence of learning orientation on SMEs’ performance, (2) determine the influence of learning orientation through entrepreneurial orientation on SMEs’ performance, (3) determine the influence of learning orientation through strategic resource management on SMEs’ performance, (4) determine the influence of entrepreneurial orientation through strategic resource management on SMEs’ performance, and (5) determine the mediating effect of competitive advantage on the influence of learning orientation, strategic resource management, and entrepreneurial orientation on SMEs’ performance.
Literature Review
Theoretical Review
This study used the resource-based theory, a composite theory derived from the resource-based view and the knowledge-based view (Theriou et al., 2009) to describe the influence of strategic entrepreneurship on SMEs’ performance under the mediation of competitive advantage.
Resource-Based View
The resource-based view has been in existence since its introduction by Penrose in 1959 (Curado, 2006). The resource-based view suggests that a firm’s competitive advantage and superior performance emanate from firm-specific resources and capabilities that are costly to be copied by rivals and indeed such resources are valuable, rare, imperfectly imitable, and non-substitutable (Barney, 1991). The strategy of the firm to carry out its business depends on the available resources. Despite the importance of the resource-based view in strategic management (Akio, 2005; Barney et al., 2011; Connor, 2005), it falls victim of three weaknesses: (1) the resource-based view does not explain the importance of entrepreneurial strategies and abilities as one of the sources of competitive advantage (Akio, 2005; Priem & Butler, 2001), (2) the resource-based view does not broadly explain the creation or acquisition of strategic assets (Connor, 2002), and (3) the resource-based view is silent on how and why certain firms have competitive advantage in dynamic environment (Teece et al., 1997). In order to reinforce the resource-based view, the knowledge-based view has been introduced as its extension (Curado, 2006).
Knowledge-Based View
According to Pemberton and Stonehouse (2000) cited in Theriou et al. (2009), the knowledge-based view postulates that competitive advantage is governed by the capability of firms to develop new knowledge-based assets that create core competencies. Therefore, the strategy of the firm depends on the available knowledge capabilities. The knowledge-based view assumes that knowledge is the critical input in production and the primary source of value (Grant, 1996). However, building of distinctive capabilities and core competencies within firms calls for knowledge management processes of creating, acquiring, storing, sharing, and deploying knowledge; thus, firms should first build knowledge management capabilities so as to gain abilities of creating other necessary distinct capabilities and core competencies (Pemberton and Stonehouse, 2000 cited in Theriou et al., 2009). Literature has demonstrated that there is a growing consensus that competitive advantage can be obtained through knowledge management capabilities (Halawi et al., 2005).
Application of the Resource-Based Theory in This Study
The resource-based theory advocates that firms should obtain competitive advantage to promote performance. The strategy employed by a firm depends on the resources owned and controlled by that firm for better performance, such resources include but not limited to assets, capabilities, organizational processes, firm attributes, the information, and knowledge (Barney, 1991). While the resource-based view recognizes resources as a source of competitive advantage and that knowledge is treated as a generic resource, the knowledge-based view recognizes knowledge as a unique resource and a critical input in production and the primary source of value (Grant, 1996); thus, knowledge management capabilities stand as a source of competitive advantage as well. The resource-based theory thus recognizes that both resources and knowledge management capabilities are sources of competitive advantage of a firm and that the strategy employed by the firm depends on both resources and knowledge management capabilities for superior firm performance.
Figure 1 (researchers’ construct based on Bengesi, 2013; Calantone et al., 2002; Grinstein, 2008; Herath & Mahmood, 2013; Ireland et al., 2003, Theriou et al., 2009; Ramaswami et al., 2006) presents the conceptual framework for this study.
Learning orientation, strategic resource management, and entrepreneurial orientation are independent variables, and SMEs’ performance is the dependent variable. Competitive advantage is a mediator between the independent and dependent variables. Since this study aimed at determining the influence of strategic entrepreneurship on SMEs’ performance, learning orientation, strategic resource management, and entrepreneurial orientation were adopted as components of strategic entrepreneurship. While learning orientation and entrepreneurial orientation reflect firm’s intangible resources (Barney, 1991), strategic resource management reflects the firm’s strategy (Ireland et al., 2003). SMEs’ performance measured by financial indicators reflects the market performance and profitability (Theriou et al., 2009).
Empirical Review
Influence of Strategic Entrepreneurship Components on SMEs’ Performance
A firm that embraces learning orientation is likely to promote performance through the use of knowledge-based assets. The influence of learning orientation on SMEs’ performance has been reported by some researchers (Amin, 2015; Calantone et al., 2002; Eshlaghy & Maatofi, 2011; Mahmood & Hanafi, 2013a; Yeni, 2015). However, some studies have reported no significant influence of learning orientation on SMEs’ performance like in the work of Nybakk (2012). Mixed results in SMEs’ performance studies are inter alia triggered by heterogeneous performance measures (Shepherd & Wiklund, 2009). Despite the mixed results, the direct influence of learning orientation and SMEs’ performance is hereby hypothesized that:
H1: Learning orientation has a positive influence on SMEs’ performance.
Possession of valuable, rare, imperfectly imitable, and non-substitutable resources (Barney, 1991) without effective management of such resources is likely to suppress the creation of competitive advantage which could lead to SMEs’ performance. In order to benefit from such resources, there is a need for a firm to adopt a strategic resource management approach. Although it is not well articulated in literature, the strategic resource management construct (a firm’s strategy) has been identified as a component of strategic entrepreneurship (Ireland et al., 2003; Dogan, 2015; Foss & Lyngsie, 2011). According to the resource-based theory, the firm’s strategy has both direct and indirect effects on SMEs’ performance (Theriou et al., 2009); hence, it is hereby hypothesized that:
H2: Strategic resource management has a positive influence on SMEs’ performance.
Although some past studies have found partial influence of entrepreneurial orientation on SMEs’ performance like in the works of Chenuos and Maru (2015) and Okangi and Letmathe (2015), most researchers tend to agree that entrepreneurial orientation influences SMEs’ performance (Amin, 2015; Amin et al., 2016; Bengesi, 2013; Campos & Valenzuela, 2013; Fatoki, 2012; Mahmood & Hanafi, 2013a; Mata & Aliyu, 2014; Rauch et al., 2009; Yeni, 2015; Zehir et al., 2015). Based on these findings, the direct influence of entrepreneurial orientation on SMEs’ performance is hypothesized that:
H3: Entrepreneurial orientation has a positive influence on SMEs’ performance.
The strategy of the firm to carry out its business depends on the firm resources which are valuable, rare, imperfectly imitable, and non-substitutable (Barney, 1991). Learning orientation and entrepreneurial orientation are intangible firm resources in the form of knowledge management capabilities and organization processes respectively (Barney, 1991; Grant, 1996). Strategic resource management is one of the strategies that can be implemented by the firm to create competitive advantage and eventually promote SMEs’ performance (Ireland et al., 2003). The influence of learning orientation through entrepreneurial orientation on SMEs’ performance has been reported in the works of Wang (2008), Petty and Wolff (2016) and Ma’toufi and Tajeddini (2015). Although literature is in deficit of studies regarding the indirect influence of learning orientation and entrepreneurial orientation through strategic resource management on SMEs’ performance, the resource-based theory (Theriou et al., 2009) suggests the indirect influence of knowledge management capabilities through strategy and resources on SMEs’ performance. Furthermore, the theory suggests the indirect influence of resources through strategy on SMEs’ performance. Based on this discussion, it is hereby hypothesized that:
H4: Learning orientation has a positive influence on strategic resource management.
H5: Entrepreneurial orientation has a positive influence on strategic resource management.
H6: Learning orientation has a positive influence on entrepreneurial orientation.
Mediating Effect of Competitive Advantage
The resource-based theory suggests that knowledge management capabilities and resources are the primary source of competitive advantage which eventually promotes firm performance (Theriou et al., 2009). Learning orientation and entrepreneurial orientation are intangible resources in the form of knowledge management capabilities and organizational processes respectively (Barney, 1991; Grant, 1996); strategic resource management is the strategy that is centered on the effective utilization of resources (Ireland et al., 2003). Literature has shown that the competitive advantage of a firm is influenced by entrepreneurial orientation (Mustafa et al., 2015) and learning orientation (Martinette & Obenchain-Leeson, 2012). It has also been suggested that competitive advantage is influenced by strategic resource management (Ireland et al., 2003; Dogan, 2015; Foss & Lyngsie, 2011). Based on these findings, it is hereby hypothesized that:
H7: Learning orientation has a positive influence on competitive advantage.
H8: Strategic resource management has a positive influence on competitive advantage.
H9: Entrepreneurial orientation has a positive influence on competitive advantage.
However, the effect of competitive advantage on SMEs’ performance is not yet extensively studied (Mahmood & Hanafi, 2013a; Mahmood & Hanafi, 2013b). Some studies which have attempted to study the influence of competitive advantage on SMEs’ performance have been facing a challenge of using diverse measures. Although past studies have been using non-uniform measures of competitive advantage and SMEs’ performance, some studies have demonstrated that SMEs’ performance is positively influenced by the firm’s competitive advantage (Ismail et al., 2010; Majeed, 2011; Muafi & Roostika, 2014; Wijetunge, 2016; Zhou et al., 2009). Based on these findings, it is hereby hypothesized that:
H10: Competitive advantage has a positive influence on SMEs’ performance.
Methodology
Research Design
Cross-sectional design was adopted in this study; it involves collecting data at a point once in time as opposed to longitudinal study design which involves multiple data collection at a point at different times (Creswell, 2012; Kothari, 2004; Singh, 2006). On the one hand, longitudinal study design is suitable when complete information of a phenomenon from its genesis up to its maturity is required and on the other hand, cross-sectional design is suitable when information of any phenomenon in the existing situation is required (Singh, 2006). Since this study aimed at studying the influence of strategic entrepreneurship and SMEs’ performance under the mediation of competitive advantage in the existing situation and not from its genesis to its maturity, cross-sectional design was considered applicable to this study. In addition, cross-sectional study design has advantages of collecting data promptly and is less expensive (Cooper & Schindler, 2011; Singh, 2006; Zikmund, 2003).
Research Area
Three urban centers in Tanzania including Dar es Salaam, Mbeya, and Morogoro were purposively selected as a geographical research area. Dar es Salaam is the business city located along the Indian Ocean coastline comprises about one-third of the SMEs located in urban centers in Tanzania (URT, 2012). Mbeya city located in the southern highlands is ranked the first urban center with the highest density (46%) of households owning SMEs in Tanzania (URT, 2012). Morogoro municipality located in the eastern part of the country has been a hub of industries in Tanzania since independence hosting inter alia the manufacturing industries (Lundqvist & Bjelkevic, 1973). In addition, Morogoro is a busy urban center connecting Dar es Salaam and Mbeya via Tanzania – Zambia highway thus it was economical to select it.
Sample Size, Sampling Technique, and Data Collection
The sample size was determined by the rule of thumb based on the requirements of factor analysis and structural equation modelling techniques. According to Hair et al. (2010) factor analysis requires a minimum sample size of 120 subjects for factor loadings ± 0.5 or above which are considered practically significant and structural equation modelling requires 15–20 observations for each independent variable or predictor. This study has four predictors (with the number of observations in brackets) viz. learning orientation (17), strategic resource management (11), entrepreneurial orientation (14), and competitive advantage (12). The highest number of observations among predictors is 17, taking 15 as appropriate minimum observations, minimum sample size was found to be 255. Structural equation modelling requires sample size ranging between 100 and 400 subjects (Hair et al., 2010); thus, a sample size of 300 subjects was considered adequate for this study. A survey method with structured questionnaire was employed to collect data from owners-managers of welding SMEs. Data collection commenced on 01 November 2017 and ended on 31 January 2018.
Measurements of Model Variables
Learning orientation (LO), strategic resource management (SRM), entrepreneurial orientation (EO), competitive advantage (CA), and SMEs’ performance (PER) constructs were measured using various items adopted from past studies as shown in Table 1.
Owners-managers of welding SMEs in the research area were asked to rank their agreement or disagreement to questions on a structured questionnaire using five-point Likert scale (from “strongly disagree” = 1 to “strongly agree” = 5) to all items consisted in LO, SRM, EO, and CA constructs.
Furthermore, owners-managers were asked to respond to the extent PER indicators have changed for the past five years with reference to December 2016 as a base year using five-point Likert scale (from “a lot less” = 1 to “a lot more” = 5).
Data Analysis
By the aid of Statistical Package for Social Sciences computer software, descriptive statistics for describing firm owner-manager viz. gender, age, and level of education were determined. Descriptive statistics for firm characteristics viz. firm age, number of employees, and amount of capital investment in machinery were also determined. Aided by the Analysis of Moment Structures computer software, inferential statistics were determined using structural equation modelling technique which consisted of confirmatory factor analysis and latent variable path analysis. Confirmatory factor analysis was used to develop a measurement model, while latent variable path analysis was used to develop a structural model that facilitated the testing of research hypotheses.
Confirmatory Factor Analysis
Confirmatory factor analysis is an iterative process, it was used to identify and thus make decisions on the deletion of items with low factor loadings and redundant ones. Retained items were then assessed for construct reliability and validity. Before conducting confirmatory factor analysis to develop a measurement model, it was necessary to compute the total score for all first-order factors (dimensions as shown in Table 1) forming up learning orientation, strategic resource management, entrepreneurial orientation, and competitive advantage constructs. Total score converted ordinal scores into continuous scores, and thus the maximum likelihood method of approximation could appropriately be used (Kline, 2011; Pallant, 2005). However, total score is valid only when factors are proved to be unidimensional (Kline, 2011). Prior to the computation of total scores, each factor was tested for unidimensionality using exploratory factor analysis technique. A factor is said to be unidimensional when all items have factor loading greater than 0.5 (Zainudin, 2015). Results for unidimensional test revealed that all factors were unidimensional and thereafter confirmatory factor analysis proceeded.
Testing of Research Hypotheses
Based on the valid confirmatory factor analysis model, the structural model was developed using latent variable path analysis. Covariance arrows (curved double-headed arrows) on the confirmatory factor analysis model were removed and replaced by regression arrows (straight single-headed arrows) between the factors to convert the measurement model into a structural model. The structural model indicated the influence of one variable to the other using regression coefficients. The model was used to test the research hypotheses (Suhr, 2006) at 5% level of significance.
Results
Owner-Manager Characteristics
Ownership and management of SMEs in the welding industry are dominated by males who represent 97.3% of all surveyed owners-managers (Table 2). Female firm owners-managers are represented by only 2.7%. These findings are close to the findings of Isaga (2012) who found that males dominated firm ownership and management of the Tanzanian furniture industry by 99.0% compared with only 1.0% for females. Comparison of these two studies conducted in the Tanzanian manufacturing industry indicates that the industry is dominated by male firm owners-managers.
Table 2 describes that welding industry SMEs in Tanzania are dominantly owned and managed by entrepreneurs having the age between 18–49 years who represent 91.7% of all surveyed entrepreneurs. The remaining 8.3% informs that ownership and management of SMEs are under the entrepreneurs aged 50 years and above. It is interesting to note that 53.3% viz. more than half of the welding industry SMEs owners-managers are aged below 40 years implying that entrepreneurship is in the heart of young people. Formal education equips entrepreneurs with knowledge for efficient and effective undertaking of their daily activities. Most welding industry SMEs are owned by entrepreneurs with ordinary level secondary education (55.5%), and 30.4% owners-managers of welding SMEs have primary education indicating that 86.0% owners-managers of welding SMEs have the highest level of education not more than ordinary level secondary education. The remaining 14.0% of welding SMEs owners-managers have advanced level secondary education and above (Table 2).
These findings imply that the welding industry does not attract many people with higher education above ordinary level education. Exploration of the welding industry has shown that people with ordinary level education or below face difficulty in securing formal employment and thus decide to establish their own welding workshops as alternatives to employment (Key Informant Interviews, personal communication, September 6–30, 2017).
Firm Characteristics
Based on their age, Ismail et al. (2010) divided firms into two categories viz. young firms with the age of 15 and below and old firms with the age of 16 and above. Table 3 shows that a large number (68.6%) of the surveyed welding SMEs had age between 5 and 14 years, by considering the Ismail et al.’s (2010) firm categorization, the findings imply that the sample was dominated by young firms.
Using the criterion of number of employees to categorize SMEs, the sample comprised micro and small enterprises. A micro enterprise employs one to four employees, while the small enterprise employs five to 49 employees (URT, 2003). Table 3 shows that as of December 31, 2016, a total of 129 (43.0%) firms had employees between one and four and the remaining 170 firms (56.7%) had employees between five and 49. One firm had missing data. Another criterion of categorizing SMEs is the capital investment in machinery. The sample comprised micro, small, and medium enterprises. Micro, small, and medium enterprises invest Tanzanian Shillings (TZS) up to 5 million, above 5 million to 200 million and above 200 million to 800 million respectively (URT, 2003). It was found that 99 (33.0%) firms were micro enterprises, 198 (66.0%) were small enterprises, and three (1.0%) were medium enterprises (Table 3). These statistics inform that the sample comprised micro, small, and medium enterprises.
Confirmatory Factor Analysis
A total of 18 items were used to develop the measurement model. Model constructs and the corresponding abbreviations for each item are shown in Table 1.
Assessment of Factor Loadings
Factor loadings for all items in each construct except the differentiated product (total DPR) item of competitive advantage construct were found to be greater than 0.5 and significant. Total DPR item of competitive advantage construct had a factor loading of 0.2. Since the factor loading of the total DPR item was less than 0.5, the item was deleted from the measurement model (Fig. 2).
Assessment of Model Fit Indices
After the deletion of the total DPR item, model goodness of fit was assessed. Model goodness of fit is normally assessed using various fit indices which are divided into three main categories viz. absolute, incremental, and parsimonious fits as shown in Table 4. Hair et al. (2017) urged researchers to avoid dump of all fit indices; they recommended the use of minimum chi-square statistic, number of degrees of freedom, p value, comparative fit index (CFI), and root mean square error of approximation (RMSEA) to fully report the CFA model goodness of fit. Pursuant to Hair et al.’s (2017) recommendations, this study assessed model goodness of fit using minimum chi-square statistic, number of degrees of freedom, p value, CFI, RMSEA, and the ratio of minimum chi-square over degrees of freedom (Cmin/df). Assessment of model goodness of fit revealed that model fit indices were not acceptable thus assessment and identification of pairs of items with high modification indices values proceeded. During the development of the measurement model, total CLE item of LO construct and total INN item of EO construct were deleted because they had modification index values greater than 15 with other items. However, deletion of the aforesaid items did not render the model acceptable; model goodness of fit indices were still not acceptable; thus, total CAG item of EO construct and total IOR item of LO construct were also deleted from the model.
Having deleted the aforementioned items (Table 5), model goodness of fit indices were found to be acceptable. In order to further improve the measurement model, total BRE and total LCA items of SRM construct were covaried.
Referring to Table 4 and Fig. 2, Cmin/df, CFI, and RMSEA values were found to be within the acceptable range indicating that the observed covariance matrix is closer to the theory implied covariance matrix. Minimum chi-square statistic (67.674, p = 0.100) was found to be insignificant at 0.05 level of significance indicating that the model is acceptable.
Assessment of Construct Reliability and Validity
Construct reliability was assessed using composite reliability (CR) values. Construct convergent validity was assessed based on factor loading statistical significance of measured variables and average variance extracted (AVE) values (Zainudin, 2015, Hair et al., 2010). Assessment of construct reliability for financial performance for five years period revealed that all constructs viz. LO, SRM, EO, CA, and PER constructs had CR values higher than 0.6 (Table 6). These findings inform that construct reliability for financial performance for the past five-year period was achieved.
Construct convergent validity was assessed using factor loadings and AVE values. All factor loadings for all items in each construct (LO, SRM, EO, CA, and PER) were found to be higher than 0.5 and were statistically significant confirming that construct convergent validity using factor loadings criterion was achieved. AVE values for all model constructs in the exception of EO were found to be greater than 0.5. Although AVE value for EO was found to be 0.426 which is less than 0.5, since all factor loadings for EO were greater than 0.5 and significant, the convergent validity for EO was achieved.
Construct discriminant validity was assessed by comparing correlation values among a pair of independent variables (constructs) with the square root of AVE values. By the aid of the SmartPLS 3 computer software, construct discriminant validity was determined using the Fornell-Larcker criterion. The criterion requires all square root of AVE values to be higher than all correlation values viz. Square root of AVE value higher than correlation value indicates good evidence of construct discriminant validity. Results for construct discriminant validity are shown in Table 7. Smart PLS 3 software was used due to the fact that Analysis of Moment Structures software is incapable of determining construct discriminant validity among constructs.
The italicized numbers on the diagonal are the square root of AVE values while other values are correlation values. Since the square root of AVE values are higher than correlation values in both row and column of each construct (Zainudin, 2015), discriminant validity for LO, SRM, EO, and CA constructs for financial performance for the past five years period was achieved viz. the factors under assessment are unique or distinct.
Testing Research Hypotheses
Prior to hypotheses testing, the structural model was developed using latent variable path analysis. The model (Fig. 3) comprised learning orientation, strategic resource management, entrepreneurial orientation, competitive advantage, and performance constructs. Abbreviations for all model constructs and the corresponding items are shown in Table 1.
This study hypothesized that learning orientation, strategic resource management, and entrepreneurial orientation have a positive and significant influence on SMEs’ performance. Findings revealed that learning orientation does not significantly influence SMEs’ performance (β = 0.01, p = 0.964), strategic resource management does not significantly influence SMEs’ performance (β = − 0.20, p = 0.493), and entrepreneurial orientation does not significantly influence SMEs’ performance (β = − 0.19, p = 0.297). These findings confirm that hypotheses H1, H2, and H3 are not supported by the collected data.
The study also hypothesized that strategic resource management is influenced by learning orientation and entrepreneurial orientation. Findings from this study informed that learning orientation positively and significantly influences strategic resource management (β = 0.64, p < 0.001) and entrepreneurial orientation positively and significantly influences strategic resource management (β = 0.30, p = 0.045). These findings are in line with the hypothesized relationships; thus, hypotheses H4 and H5 are supported by the collected data.
Learning orientation was hypothesized to influence entrepreneurial orientation, findings confirm that learning orientation positively and significantly influences entrepreneurial orientation (β = 0.79, p < 0.001); hence, hypothesis H6 is supported by the collected data.
Furthermore, the study hypothesized that learning orientation, strategic resource management, and entrepreneurial orientation influence competitive advantage which also influences SMEs’ performance. Findings from this study disclosed that leaning orientation does not significantly influence competitive advantage (β = − 0.35, p = 0.143), strategic resource management positively and significantly influences competitive advantage (β = 0.88, p = 0.001), entrepreneurial orientation does not significantly influence competitive advantage (β = 0.24, p = 0.139), and competitive advantage positively and significantly influences SMEs’ performance (β = 0.45, p = 0.003). These findings confirm that hypotheses H7 and H9 are not supported while hypotheses H8 and H10 are supported by the collected data.
Discussion
The findings from the tested ten hypotheses are discussed in this chapter. Five hypotheses were supported and five hypotheses were not supported by the collected data. Learning orientation, strategic resource management, and entrepreneurial orientation were hypothesized to have a positive influence on SMEs’ performance. Findings have shown that learning orientation has no significant influence on SMEs’ performance. Although some past studies (Amin, 2015; Calantone et al., 2002; Eshlaghy & Maatofi, 2011; Mahmood & Hanafi, 2013a; Yeni, 2015) have reported positive and significant influence of learning orientation on SMEs’ performance, other studies such as Nybakk (2012) and Suliyanto and Rahab (2012) have reported insignificant influence of learning orientation on SMEs’ performance similar to the findings of this study.
Similarly, strategic resource management has no significant influence on SMEs’ performance. Despite the recognition of strategic resource management construct as a component of strategic entrepreneurship (Ireland et al., 2003; Dogan, 2015; Foss & Lyngsie, 2011), this study was unable to compare these findings from past studies due to lack of literature investigating the direct influence of strategic resource management on SMEs’ performance. Likewise, this study found that entrepreneurial orientation has no significant influence on SMEs’ performance. Although some past studies have found positive and significant influence of entrepreneurial orientation on SMEs’ performance (Amin, 2015; Amin et al., 2016; Bengesi, 2013; Campos & Valenzuela, 2013; Fatoki, 2012; Mahmood & Hanafi, 2013a; Mata & Aliyu, 2014; Rauch et al., 2009; Yeni, 2015; Zehir et al., 2015), the insignificant influence of entrepreneurial orientation on SMEs’ performance may be attributed to the fact that welding industry SMEs in Tanzania are unwilling to invest financial resources in risky projects are not extensively involved in innovative works as product designs depend on the customers’ instructions (Key Informant Interviews, personal communication, September 6–30, 2017).
It was also hypothesized that learning orientation, strategic resource management, and entrepreneurial orientation have a positive influence on competitive advantage. The influences of learning orientation and entrepreneurial orientation on competitive advantage were found to be insignificant. Although the resource-based theory suggests that knowledge management capabilities and firm resources are key elements in creating competitive advantage (Theriou et al., 2009), this study has provided empirical evidence that learning orientation and entrepreneurial orientation alone cannot create a competitive advantage for SMEs. However, the study has found a positive and significant influence of strategic resource management on competitive advantage; this implies that the firm’s strategy is important in creating a competitive advantage (Ireland et al., 2003; Barney, 1991). These findings imply that knowledge management capabilities and firm resources create a competitive advantage through strategic resource management.
This study further hypothesized that learning orientation and entrepreneurial orientation have a positive influence on strategic resource management. Findings have confirmed that learning orientation and entrepreneurial orientation positively and significantly influence strategic resource management. These findings are in line with the resource-based theory which suggests that knowledge management capabilities determine the firm’s strategy (Curado, 2006; Theriou et al., 2009) and firm resources determine the firm’s strategy (Barney, 1991; Theriou et al., 2009). Past studies by Ireland et al. (2003) and Ireland and Webb (2007) describe that firm resources especially intangible resources are important determinants of the way the firm manages resources strategically.
In another instance, learning orientation was hypothesized to have a positive influence on entrepreneurial orientation. This hypothesis has been confirmed as findings from this study inform that learning orientation positively and significantly influences entrepreneurial orientation similar to findings of Pett and Wolff (2016) and Vasconcelos et al. (2016). These findings comply with the resource-based theory which suggests that knowledge management capabilities are the source of firm resources (Curado, 2006; Theriou et al., 2009).
Lastly, it was hypothesized that competitive advantage has a positive influence on SMEs’ performance. This study has empirically proved that competitive advantage has a positive and significant influence on SMEs’ performance. These findings are in line with the resource-based theory which suggests that competitive advantage promotes SMEs’ performance (Theriou et al., 2009).
Conclusions, Implications, and Recommendations
Conclusions
Learning orientation, strategic resource management, and entrepreneurial orientation constructs represented the knowledge management capabilities, strategy, and resources components of the resource-based theory respectively. Taking into account that strategic entrepreneurship is composed of these constructs, the mediating effect of competitive advantage was assessed on the influence of strategic entrepreneurship on SMEs’ performance. Three paths on the structural model were found to be mediated by competitive advantage. First, competitive advantage mediates the indirect influence of learning orientation through strategic resource management on SMEs’ performance; second, competitive advantage mediates the indirect influence of entrepreneurial orientation through strategic resource management on SMEs’ performance; and third, competitive advantage mediates the indirect influence of learning orientation through entrepreneurial orientation and strategic resource management on SMEs’ performance.
The indirect influence of learning orientation on SMEs’ performance through entrepreneurial orientation and strategic resource management as mediated by competitive advantage confirms that learning orientation, strategic resource management, and entrepreneurial orientation constructs adopted from entrepreneurship and strategic management literature are empirically verified components of strategic entrepreneurship.
Since learning orientation, strategic resource management, and entrepreneurial orientation constructs represented knowledge management capabilities, strategy, and resources components of the resource-based theory respectively, it is hereby concluded that the possession of knowledge management capabilities, strategy, and resources alone cannot promote SMEs’ performance unless such resources are managed strategically. Thus, superior SMEs’ performance is obtained through the creation of competitive advantage emanating from adopting a strategic entrepreneurship approach that combines altogether learning orientation, strategic resource management, and entrepreneurial orientation.
Contributions of the Study
The study has contributed to existing strategic entrepreneurship literature in five grounds; first, it has introduced strategic resource management construct as a firm’s strategy (Ireland et al., 2003) to be combined with learning orientation and entrepreneurial orientation constructs which are intangible resources (Barney, 1991) to form strategic entrepreneurship. A composite measure has been developed describing strategic resource management as a unidimensional second-order factor consisting of three first-order factors viz. structuring resource portfolio, bundling resources, and leveraging capabilities.
Second, this study has created a composite measure of SMEs’ performance for financial performance measures as suggested by Shepherd and Wiklund (2009). It has been found that SMEs’ performance is a unidimensional first-order factor composed of three items viz. growth in assets, sales, and number of employees as financial performance measures. Past studies have not paid proper consideration on the dimensionality of SMEs’ performance (Santos & Brito, 2012).
Third, the study has operationalized the resource-based theory, into a workable model (Fig. 1) that represents the direct and indirect influence of learning orientation, strategic resource management, and entrepreneurial orientation on SMEs’ performance and competitive advantage as a mediating variable.
Fourth, the study has introduced competitive advantage as a mediating variable between strategic entrepreneurship and SMEs’ performance in accordance with the resource-based theory (Theriou et al., 2009). It has been found that competitive advantage is a second-order factor composed of two first-order factors viz. market sensing and market responsiveness.
Fifth, the study has obtained empirical evidence on the influence of strategic entrepreneurship components on SMEs’ performance under the mediation of competitive advantage in Tanzanian welding industry SMEs.
Inclusion of learning orientation, strategic resource management, entrepreneurial orientation, competitive advantage and SMEs’ performance constructs in a single model with direct and indirect influence among the constructs coupled with the development of composite measures of these constructs distinguishes this study from past studies.
Implications of the Findings
Theoretical Implications
Despite the applicability of the resource-based view and the knowledge-based view in describing SMEs’ performance, isolation of these views diminishes the potential benefits offered by the strategic entrepreneurship approach. In supporting this argument, Pemberton and Stonehouse (2000) cited in Theriou et al. (2009) explained that knowledge is a primary source of all other resources and strategies and that competitive advantage and firm performance are governed by knowledge management capabilities; thus, the knowledge-based view strengthens the resource-based view. The findings of this study imply that the resource-based theory, the composite theory derived from the resource-based view and the knowledge-based view, holds a better chance to explain the influence of strategic entrepreneurship components on SMEs’ performance under the mediation of competitive advantage than the individual views when used in isolation.
Policy Implications
Findings of this study inform that welding SMEs are owned and managed by individuals with low levels of both formal and technical education. The current Tanzanian SME policy inter alia advocates for the provision of education, training, and other programs that are conducive to the development of entrepreneurship (URT, 2003). Since it has been found that SMEs’ performance can better be promoted by adopting strategic entrepreneurship approach, the findings of this study encourage the need for advocating design of training and other education programs to equip SMEs with knowledge that will lead to the acquisition of appropriate resources and the strategic management of such resources.
Limitations of the Study
This study has four limitations that require attention when using the findings of this study: First, the sample was drawn from a single industry viz. the welding industry. The decision to use a single industry was reached in a bid to obtain deep insights into the relationship of strategic entrepreneurship, competitive advantage, and SMEs’ performance. By using a single industry, one may be confident in the research findings as opposed to those obtained from multiple industries where one industry may severely dictate the overall findings. This study therefore admits that the generalization of the research findings cannot be extended beyond the welding industry. Second, although SMEs’ performance was measured using a five-year period, data collection was conducted using a survey method with a cross-sectional design; thus, the findings reflect only the performance for the past five years with reference to December 2016 as a base year. The findings do not fit in describing trends regarding the relationship of strategic entrepreneurship, competitive advantage, and SMEs’ performance over different periods, i.e., time series. Third, strategic entrepreneurship is a new field of research (Dogan, 2015; Foss & Lyngsie, 2011; Gelard & Ghazi, 2014); it can be defined using several constructs from entrepreneurship and strategic management fields. The definition of strategic entrepreneurship in this study is limited to a synergy of learning orientation, strategic resource management, and entrepreneurial orientation. Fourth, SMEs’ performance may be measured using various indicators. Measurement of SMEs’ performance in this study is limited to financial performance consisting of growth in assets, sales, and number of employees.
Recommendations
Recommendations for Practice
SMEs eager to obtain and sustain competitive advantage that leads to superior performance are urged to embrace learning orientation which influences entrepreneurial orientation and strategic resource management. Through continuous learning, SMEs may be in good positions to understand the environment in which they are operating; necessary actions may be competently taken to improve performance. Continuous learning may also facilitate the acquisition of appropriate resources and strategies necessary to carry out daily undertakings of SMEs in the welding industry under a dynamic environment.
Recommendations for Further Research
Based on the research findings, this study puts forth four recommendations; first, the structures of some model variables were found to deviate from the original scales, i.e., two items of learning orientation viz. commitment to learning and intra-organizational knowledge sharing were deleted, two items of entrepreneurial orientation viz. innovation and pro-activeness were deleted, and one item of competitive advantage viz. differentiated products was also deleted. It is strongly recommended to replicate this study in other industries in a bid to establish the applicable scales of the research variables.
Second, the direct influences of learning orientation, strategic resource management, and entrepreneurial orientation on SMEs’ performance were unexpectedly found to be non-significant; future studies may supplement quantitative paradigm with qualitative paradigm to explore the reasons for such insignificant influence.
Third, future studies may select and use other constructs from entrepreneurship and strategic management literature to describe strategic entrepreneurship in lieu of learning orientation, strategic resource management, and entrepreneurial orientation and thereafter compare the findings to the findings of this study.
Fourth, the developed conceptual framework is recommended for use in future studies to ascertain its applicability in other industries.
Availability of Data and Materials
Datasets for this study are available and the same can be obtained from a corresponding author on reasonable request.
Abbreviations
- AGFI:
-
Adjusted goodness of fit index
- AST5:
-
Assets growth for the past 5 years
- AVE:
-
Average variance extracted
- Cmin:
-
Minimum chi-square statistic
- CR:
-
Composite reliability
- df:
-
Degrees of freedom
- EMP5:
-
Growth in the number of employees for the past 5 years
- EO:
-
Entrepreneurial orientation
- GFI:
-
Goodness of fit index
- MI:
-
Modification index
- NFI:
-
Normed fit index
- SAL5:
-
Sales growth for the past 5 years
- TLI:
-
Tucker-Lewis index
- Total AUT:
-
Total score for autonomy construct
- Total BRE:
-
Total score for bundling resources construct
- Total CAG:
-
Total score for competitive aggressiveness construct
- Total CLE:
-
Total score for commitment for learning construct
- Total DPR:
-
Total score for differentiated products construct
- Total INN:
-
Total score for innovation construct
- Total IOR:
-
Total score for intra-organizational knowledge sharing construct
- Total LCA:
-
Total score for leveraging capabilities construct
- Total MRE:
-
Total score for market responsiveness construct
- Total MSE:
-
Total score for market sensing construct
- Total OMI:
-
Total score for open-mindedness construct
- Total PRO:
-
Total score for pro-activeness construct
- Total RTA:
-
Total score for risk-taking construct
- Total SRE:
-
Total score for structuring resources construct
- Total SVI:
-
Total score for shared vision construct
- URT:
-
United Republic of Tanzania
- USD:
-
US dollar
References
Akio, T. (2005). The critical assessment of the resource-based view of strategic management: the source of heterogeneity of the firm. Ritsumeikan International Affairs, 3, 125–150.
Amin, M. (2015). The effect of entrepreneurship orientation and learning orientation on SMEs’ performance: an SEM – PLS approach. Journal of International Business and Entrepreneurship Development, 8(3), 215–230.
Amin, M., Thurasamy, R., Mohamad, A., Aznur, A. & Kaswuri, H. (2016). The effect of market orientation as a mediating variable in the relationship between entrepreneurial orientation and SMEs performance. Nankai Business Review International, 7.
Barney, J. (1991). Firm resources and sustained competitive advantage. Journal of Management, 17(1), 99–120.
Barney, J. B., Ketchen Jr., D. J., & Wright, M. (2011). The future of resource-based theory: revitalization or decline? Journal of Management, 37(5), 1299–1315.
Bengesi, K. M. K. (2013). Strategic entrepreneurial response of small and medium enterprises. University of Pretoria: Unpublished doctoral thesis.
Calantone, R. J., Cavusgila, S. T., & Zhao, Y. (2002). Learning orientation, firm innovation capability, and firm performance. Industrial Marketing Management, 31(6), 515–524.
Campos, H. M., & Valenzuela, F. A. A. (2013). The relationship between entrepreneurial orientation, time orientation and small business performance: an evidence from Mexico. Revista da Micro e Pequena Empresa, Campo Limpo Paulista, 7(1), 48–63.
Campos, H. M., Nuno de la Parra, J. P. and Parellada, F. S. (2012). The entrepreneurial orientation-dominant logic-performance relationship in new ventures: An exploratory quantitative study. BAR, Rio de Janeiro, 9(4), 60–77.
Chai, Y. M., & Sa, M. L. L. (2016). Strategic entrepreneurship and performance of small and medium enterprises of Malaysia. The International Journal of Business & Management, 4(2), 116–122.
Chenuos, N. G., & Maru, L. C. (2015). Entrepreneurial orientation and firm performance: evidence from small and micro-enterprises in Kenya. European Journal of Business and Management, 7(27), 187–196.
Connor, T. (2002). The resource-based view of strategy and its value to practising managers. Strategic Change, 11, 307–316.
Cooper, D. R., & Schindler, P. S. (2011). Business research method. New York: McGraw-Hill.
Creswell, J. W. (2012). Educational research: planning, conducting, and evaluating quantitative and qualitative research. Boston: Pearson Education, Inc..
Curado, C. (2006). The knowledge based-view of the firm: from theoretical origins to future implications. Working Paper 1, ISEG – Universidade Técnica de Lisboa.
Dogan, N. (2015). The intersection of entrepreneurship and strategic management: strategic entrepreneurship. Procedia - Social and Behavioural Sciences, 195, 1288–1294.
Eshlaghy, A. T., & Maatofi, A. (2011). Learning orientation, innovation and performance: evidence from small-sized business firms in Iran. European Journal of Social Sciences, 19(1), 114–122.
Fatoki, O. (2012). The impact of entrepreneurial orientation on access to debt finance and performance of small and medium enterprises in South Africa. Journal of Social Sciences, 32(2), 121–131.
Foss, N. J., & Lyngsie, J. (2011). The emerging strategic entrepreneurship field: origins, key tenets and research gaps. In Working Paper 7, Frederiksberg: Department of Strategic Management and Globalization. Copenhagen Business School: January.
Gelard, P., & Ghazi, E. (2014). Strategic entrepreneurship element from theory to practice. International Journal of Business and Technopreneurship, 4(2), 205–219.
Grant, R. M. (1996). Toward a knowledge-based theory of the firm. Strategic Management Journal, 17 (winter special issue), 109-122.
Grinstein, A. (2008). The relationships between market orientation and alternative strategic orientations: a meta-analysis. European Journal of Marketing, 42 No. (1/2), 115-134.
Hair Jr., J. F., Babin, B. J., & Krey, N. (2017). Covariance-based structural equation modeling in the Journal of Advertising: Review and recommendations. Journal of Advertising, 46(1), 163–177.
Hair Jr., J. F., Black, W. C., Babin, B. J., & Anderson, R. E. (2010). Multivariate data analysis: global perspective. New Jersey: Pearson Prentice Hall.
Halawi, L. A., Aronson, J. E., & McCarthy, R. V. (2005). Resource-Based View of knowledge management for competitive advantage. The electronic journal of knowledge management, 3(2), 75–86.
Herath, H. M. A., & Mahmood, R. (2013). Strategic orientation based research model of SME performance for developing countries. Review of Integrative Business and Economics Research, 2(1), 430–440.
Hitt, M. A., Ireland, R. D., Camp, S. M. & Sexton, D. L. (2001). Strategic entrepreneurship: Integrating entrepreneurial and strategic management perspectives. Strategic Management Journal, (January), 1-16.
Ireland, R, D. & Webb, J. W. (2007). Strategic entrepreneurship: creating competitive advantage through streams of innovation. Business Horizons, 50, 49-59.
Ireland, R. D., Hitt, M. A., & Sirmon, D. G. (2003). A model of strategic entrepreneurship: the construct and its dimensions. Journal of Management, 29(6), 963–989.
Isaga, N. (2012). Entrepreneurship and the growth of SMEs in the furniture industry in Tanzania. Vrije Universiteit: Unpublished doctoral thesis.
Ismail, A. I., Rose, R. C., Abdullah, H., & Uli, J. (2010). The relationship between organisational competitive advantage and performance moderated by the age and size of firms. Asian Academy of Management Journal, 15(2), 157–173.
Kazimoto, P. (2014). Assessment of challenges facing small and medium enterprises towards international marketing standards: a case study of Arusha region Tanzania. International Journal of Academic Research in Accounting, Finance and Management Sciences, 4(2), 303–311.
Kline, R. B. (2011). Principles and Practice of Structural Equation Modelling. New York: The Guilford.
Kothari, C. R. (2004). Research methodology. New Age: New Delhi.
Kraus, S., & Kauranen, I. (2009). Strategic management and entrepreneurship: friends or foes? International Journal of Business Science and Applied Management, 4(1), 37–50.
Lundqvist, J. & Bjelkevic, B. (1973). The economic structure of Morogoro town: some sectoral and regional characteristics of a medium-sized African town. https://www.files.ethz.ch/isn/97123/17.pdf. .
Ma’toufi, A. R., & Tajeddini, K. (2015). The impact of learning orientation on entrepreneurial orientation and innovation in small-sized business firms. Middle East J. Management, 2(3), 252–267.
Mahmood, R., & Hanafi, N. (2013a). Entrepreneurial orientation and business performance of women-owned small and medium enterprises in Malaysia: competitive advantage as a mediator. International Journal of Business and Social Science, 4(1), 82–90.
Mahmood, R., & Hanafi, N. (2013b). Learning orientation and business performance of women-owned SMEs in Malaysia: the mediating effect of competitive advantage. British Journal of Arts and Social Sciences, 11(2), 150–161.
Majeed, S. (2011). The impact of competitive advantage on organizational performance. European Journal of Business and Management, 3(4), 191–196.
Martinette, L. A., & Obenchain-Leeson, A. (2012). The relationship between learning orientation and business performance and the moderating effect of competitive advantage: a service organization perspective. Journal of Service Science, 5(1), 43–58.
Mashenene, R. G., & Rumanyika, J. (2014). Business constraints and potential growth of small and medium enterprises in Tanzania: a review. European Journal of Business and Management, 6(32), 72–79.
Mata, B. A. K., & Aliyu, M. S. (2014). The relationship between some determinants of SME performance in Nigeria: a qualitative approach. European Journal of Business and Management, 6(2), 107–114.
Muafi, P., & Roostika, R. (2014). Organizational performance and competitive advantage determinants of creative SMEs. European Journal of Economics and Management, 1(2), 7–25.
Mustafa, H., Rehman, K. U., Zaidi, S. A. R., & Iqbal, F. (2015). Studying the phenomenon of competitive advantage and differentiation: market and entrepreneurial orientation perspective. Journal of Business and Management Sciences, 3(4), 111–117.
Mwapachu, J. V. (2012). SMEs as strategic drivers of African socio-economic transformations: challenges and policy prescriptions. https://www.sidint.net/content/smes-strategic-drivers-african-socio-economic-transformations-challenges-and-policy. .
Nybakk, E. (2012). Learning orientation, innovativeness and financial performance in traditional manufacturing firms: a higher order structural equation model. International Journal of Innovation Management, 16(5), 1–33.
Okangi, F. P. & Letmathe, P. (2015). Measuring entrepreneurial orientation of the local tanzanian construction firms. Paper presented at a meeting of the Annual Paris Business Research Conference, 13 – 14 August, Paris.
Pallant, J. (2005). SPSS survival manual: a step guide to data analysis using SPSS for Windows (Version 12). Allen & Unwin: Sydney.
Petty, T., & Wolff, J. A. (2016). Entrepreneurial orientation and learning in high and low-performing SMEs. Journal of Small Business Strategy, 26(2), 71–86.
Priem, R. L., & Butler, J. E. (2001). Is the resource-based “view” a useful perspective for strategic management research? Academy of Management Review, 26(1), 22–40.
Ramaswami, S. N., Srivastava, R., & Bhargava, M. (2006). Market-based assets and capabilities, business processes, and financial performance. Working paper: Emory University.
Rauch, A., Wiklund, J., Lumpkin, G. T., & Frese, M. (2009). Entrepreneurial orientation and business performance: an assessment of past research and suggestions for the future. Entrepreneurship Theory and Practice, 33(3), 761–787.
Santos, J. B., & Brito, L. A. L. (2012). Toward a subjective measurement model for firm performance. BAR, Rio de Janeiro, 9(6), 95–117.
Shepherd, D., & Wiklund, J. (2009). Are we comparing apples with apples or apples with oranges? Appropriateness of knowledge accumulation across growth studies. Entrepreneurship Theory and Practice, 33(1), 105–123.
Singh, Y. K. (2006). Research methodology and statistics. New Age: New Delhi.
Suhr, D. (2006). The basics of structural equation modeling. http://www.lexjansen.com/wuss/2006/tutorials/TUT-Suhr.pdf. .
Suliyanto, & Rahab. (2012). The role of market orientation and learning orientation in improving innovativeness and performance of small and medium enterprises. Asian Social Science, 8(1).
Teece, D. J., Pisano, G., & Shuen, A. (1997). Dynamic capabilities and strategic management. Strategic Management Journal, 18(7), 509–533.
Theriou, N. G., Aggelidis, V., & Theriou, G. N. (2009). A theoretical framework contrasting the resource-based perspective and the knowledge-based view. European Research Studies, 12(3), 177–190.
United Republic of Tanzania [URT] (1999). Tanzania development vision 2025. Dar es Salaam, Tanzania. Government Printer.
United Republic of Tanzania [URT]. (2003). Small and medium enterprise development policy. In Dar es Salaam, Tanzania. Government: Printer.
United Republic of Tanzania [URT]. (2012). National baseline survey report: micro, small and medium enterprises in Tanzania. Ministry of Trade and Industry: Dar es Salaam.
Vasconcelos, V. N. S. A., Silveira, A., & Bizarrias, F. S. (2016). The relations between entrepreneurial orientation, organizational learning and organizational performance of small enterprises. International Journal of Professional Business Review, 1(2), 1–14.
Wang, C. L. (2008). Entrepreneurial orientation, learning orientation, and firm performance. Entrepreneurship Theory and Practice, 32(4), 635–656.
Wijetunge, W. A. D. S. (2016). Service quality, competitive advantage and business performance in service providing SMEs in Sri Lanka. International Journal of Scientific and Research Publications, 6(7), 720–728.
Yeni, Y. H. (2015). The influence of entrepreneurial orientation and learning orientation on firm performance of MSMEs in west Sumatra. Sydney: Paper presented at the Australasian conference on business and social sciences.
Zainudin, A. (2015). SEM made simple: a gentle approach to learning structural equation modeling. Bhd: MPWS Rich Publication Sdn.
Zehir, C., Can, E., & Karaboga, T. (2015). Linking entrepreneurial orientation to firm performance: the role of differentiation strategy and innovation performance. Procedia - Social and Behavioural Sciences, 210, 358–367.
Zhou, K. Z., Brown, J. R., & Dev, C. S. (2009). Market orientation, competitive advantage, and performance: a demand-based perspective. Journal of Business Research, 62(11), 1063–1070.
Zikmund, W. G. (2003). Business research methods. New York: Thomson South-western.
Acknowledgement
The authors extend acknowledgement to Dr. George Mofulu of Mzumbe University in Tanzania who rendered useful contributions from research proposal preparation to the final production of this paper.
Funding
The study received no funds from any individual or organization other than the authors.
Author information
Authors and Affiliations
Contributions
KK designed and conducted the study under the supervision of NI. Specifically, KK designed a research proposal, collected and analyzed the data, and prepared a draft version of this paper. In all stages, NI read the work and accordingly raised some comments which were incorporated to address the observed weaknesses in this study. Finally, all authors approved the submission of the paper to the Journal of Global Entrepreneurship Research to be considered for publication. All authors read and approved the final manuscript.
Authors’ Information
Kibeshi Kiyabo (MSc) is a PhD candidate at Mzumbe University in Tanzania. Dr. Nsubili Isaga (PhD) is a lecturer at School of Business, Mzumbe University, Tanzania.
Corresponding author
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Kiyabo, K., Isaga, N. Strategic entrepreneurship, competitive advantage, and SMEs’ performance in the welding industry in Tanzania. J Glob Entrepr Res 9, 62 (2019). https://doi.org/10.1186/s40497-019-0188-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s40497-019-0188-9