Abstract
Optimization problems concerning complex structures with many design variables may entail an unacceptable computational cost. This problem can be reduced considerably with a multilevel approach: A structure consisting of several components is optimized as a whole (global) as well as on the component level. In this paper, an optimization method is discussed with applications in the assessment of the impact of new design considerations in the development of a structure. A strategy based on fully stressed design is applied for optimization problems in linear statics. A global model is used to calculate the interactions (e.g., loads) for each of the components. These components are then optimized using the prescribed interactions, followed by a new global calculation to update the interactions. Mixed discrete and continuous design variables as well as different design configurations are possible. An application of this strategy is presented in the form of the full optimization of a vertical tail plane center box of a generic large passenger aircraft. In linear dynamics, the parametrization of the component interactions is problematic due to the frequency dependence. Hence, a modified method is presented in which the speed of component mode synthesis is used to avoid this parametrization. This method is applied to a simple test case that originates from noise control.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Berke L (1992) Structural optimization of large structural systems by optimality criteria methods. NASA STI/Recon Technical Report N
Chen D, Hagan MT (1999) Optimal use of regularization and cross-validation in neural network modelling. International Joint Conference on Neural Networks. Neural Netw 2:1275–1280
Coello CA (2002) Theoretical and numerical constraint-handling techniques used with evolu- tionary algorithms: a survey of the state of the art. Comput Methods Appl Mech Eng 191:1245–1287
Craig JRR Jr. (1981) Structural dynamics: an introduction to computer methods. Wiley, New York, 1981
Demuth MB, Hagan MT (1996) Neural network design. PWS Publishing Company
Entzinger JO (2004) Multilevel distributed structure optimization. In: Proceedings of ICAS2004, Yokohama, Japan
Haftka RT, Gürdal Z (1992) Elements of structural optimization. Kluwer, Dordrecht, The Netherlands
Hornik K (1989) Multilayer feedforward networks are universal approximators. Neural Netw (2):359–366
Jin R, Chen W, Simpson T (2001) Comparative studies of metamodelling techniques under multiple modelling criteria. Struct Multidisc Optim 23:1–13
Kirsch U, Bogomolni M, van Keulen F (2005) Efficient finite difference design sensitivities. AIAA J 43(2):399–405
Mackay DJC (1992a) A practical framework for backprop networks. Neural Comput (4):448–472
Mackay DJC (1992b) Bayesian interpolation. Neural Comput (4):415–447
Menhaj MB, Hagan MT (1994) Training feedforward networks with the marquardt algorithm. IEEE Transac Neural Netw 5(6):989–993
Ong YS, Nair PB, Keane AJ, Wong KW (2004) Surrogate-assisted evolutionary optimization frameworks for high-fidelity engineering design problems. In: Jin Y (ed) Knowledge incorporation in evolutionary computation. Springer, pp 307–332 (Studies in Fuzziness and Soft Computing 167)
Oude Nijhuis MHH (2003) Analysis tools for the design of active structural control systems. PhD dissertation, University of Twente
Ruijter W, Spallino R, Warnet L, Boer A de (2003) Optimization of composite panels using neural networks and genetic algorithms. In: Proceedings of the 2nd MIT conference on computational fluid and solid mechanics, Cambridge, MA
Ruijter W, Spallino R (2003) Feedback-based neural networks in the structural optimization of aerospace structures. In: Proceedings of CC2003, Warsaw, Poland
Simpson T, Peplinski J, Koch P, Allen J (2001) Metamodels for computer-based engineering design: survey and recommendations. Eng Comput 17:129–150
Sobieszczanski J, Loendorf D (1972) A mixed optimization method for automated design of fuselage structures. J Aircr 9(12):805–811
Uri K (2004) Design-oriented analysis of structures, vol 95. E-book. Springer, The Netherlands, pp 187–205
Wind JW (2005) Silent components fast, a global–local optimization method for dynamic problems. Graduate thesis, University of Twente
Wind JW (2006) A global–local optimization method for problems in structural dynamics. In: Proceedings of ICAS 2006, Hamburg, Germany
Yates K, Gürdal, Thangjitham S (1994) Multilevel optimization of space trusses using continuum modelling. Struct Multidisc Optim 7:176–183
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License ( https://creativecommons.org/licenses/by-nc/2.0 ), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
About this article
Cite this article
Wind, J.W., Akçay Perdahcıoğlu, D. & de Boer, A. Distributed multilevel optimization for complex structures. Struct Multidisc Optim 36, 71–81 (2008). https://doi.org/10.1007/s00158-007-0173-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-007-0173-8