Abstract
In high precision equipment, the use of compliant mechanisms is favourable as elastic joints offer the advantages of low friction and no backlash. If the constraints in a compliant mechanism are not carefully dealt with, even small misalignments can lead to changes in natural frequencies and stiffnesses. Such unwanted behaviour can be avoided by applying exact constraint design, which implies that the mechanism should have exactly the required degrees of freedom and non-redundant constraints so that the system is kinematically and statically determinate. For this purpose, we propose a kinematic analysis using a finite element based multibody modelling approach. In compliant mechanisms, the system’s degrees of freedom are presented clearly from the analysis of a system in which the deformation modes with a low stiffness are free to deform while the deformation modes with a high stiffness are considered rigid. If the Jacobian matrix associated with the dependent coordinates is not full column or row rank, the system is under-constrained or over-constrained. The rank of this matrix is calculated from a singular value decomposition. For an under-constrained system, any motion in the mechanism that is not accounted for by the current set of degrees of freedom is visualised using data from the right singular matrix. For an over-constrained system, a statically indeterminate stress distribution is derived from the left singular matrix and is used to visualise the over-constraints. The analysis is exemplified for the design of a straight guiding mechanism, where under-constrained and over-constrained conditions are visualised clearly.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Angeles, J., Gosselin, C.: Détermination du degré de liberté des chaînes cinématiques. Trans. Can. Soc. Mech. Eng. 12(4), 219–226 (1988)
Besseling, J.F.: Finite element methods. In: Besseling J., van der Heijden A. (eds.) Trends in Solid Mechanics—Proceedings of the Symposium Dedicated to the 65th Birthday of W.T. Koiter, pp. 53–78. Delft University Press, Delft (1979)
Blanding, D.L.: Exact Constraint: Machine Design Using Kinematic Principles. ASME Press, New York (1999)
Boer, S.E., Aarts, R.G.K.M., Brouwer, D.M., Jonker, J.B.: Multibody modelling and optimization of a curved hinge flexure. In: The 1st Joint International Conference on Multibody System Dynamics, Lappeenranta, Finland (2010)
Bottema, O.: On Grübler’s formulae for mechanisms. Appl. Sci. Res., Sect. A A2, 162–164 (1951)
Aarts, R.G.K.M., Boer, S.E., Meijaard, J.P., Brouwer, D.M., Jonker, J.B.: Analyzing overconstrained design of compliant mechanisms. Paper no. DETC2011-48548. In: Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2011), Washington, DC, USA, August 28–31, 2011 (2011)
Golub, G.H., Reinsch, C.: Singular value decomposition and least squares solutions. Numer. Math. 14(5), 403–420 (1970)
Grübler, Martin: Allgemeine Eigenschaften der zwangläufigen ebenen kinematischen Ketten. Der Civil. 29, 167–200 (1883)
Jonker, J.B.: A finite element dynamic analysis of flexible spatial mechanisms and manipulators. Comput. Methods Appl. Mech. Eng. 76, 17–40 (1989)
Jonker, J.B., Meijaard, J.P.: spacar—computer program for dynamic analysis of flexible spatial mechanisms and manipulators. In: Schiehlen W. (ed.) Multibody Systems Handbook, pp. 123–143. Springer, Berlin (1990)
Jonker, J.B., Meijaard, J.P.: Definition of deformation parameters for the beam element and their use in flexible multibody system analysis. In: ECCOMAS Thematic Conference Multibody Dynamics 2009. Warsaw University of Technology, Warsaw (2009)
Jonker, J.B., Aarts, R.G.K.M., van Dijk, J.: A linearized input-output representation of flexible multibody systems for control synthesis. Multibody Syst. Dyn. 21(2), 99–122 (2009)
Meijaard, J.P., Brouwer, D.M., Jonker, J.B.: Analytical and experimental investigation of a parallel leaf spring guidance. Multibody Syst. Dyn. 23(1), 77–97 (2010)
Pellegrino, S., Calladine C.R.: Matrix analysis of statically and kinematically indeterminate frameworks. Int. J. Solids Struct. 22(4), 409–428 (1986)
Soemers, H.M.J.R.: Design Principles for Precision Mechanisms. T-point Print, Enschede (2010)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License (https://creativecommons.org/licenses/by-nc/2.0), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
About this article
Cite this article
Aarts, R.G.K.M., Meijaard, J.P. & Jonker, J.B. Flexible multibody modelling for exact constraint design of compliant mechanisms. Multibody Syst Dyn 27, 119–133 (2012). https://doi.org/10.1007/s11044-011-9272-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11044-011-9272-9