Abstract
Purpose
In this study, we performed identification and physicochemical characterization of two cathinone derivatives, 4-FPD and 4-MEAP, found in market-available materials.
Methods
The compounds were characterized by electrospray ionization ion trap mass spectrometry (MS) in MS2 and MS3 modes, gas chromatography–MS, infrared, Raman and ultraviolet-visible spectroscopies, X-ray crystallography, differential scanning calorimetry and nuclear magnetic resonance spectroscopy.
Results
We could obtain detailed and comprehensive physicochemical characterization of 4-FPD and 4-MEAP—new cathinone derivatives available on the designer drugs market.
Conclusions
Dynamic growth in the number of psychoactive substances available on the designer drug markets makes it compulsory to obtain analytical data allowing unequivocal identification of these drugs in the fastest possible way. In this study we presented analytical data useful in quick identification of the investigated compounds.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
New psychoactive substances (NPS) have been progressively replacing classical narcotics on the illegal drug market. Among most prominent compounds of this type are synthetic cathinones and synthetic cannabinoids. Because of widespread abuse of such designer drugs (“legal highs”), the associated health risks and high frequency of novel drug variants constantly emerging on the market, numerous studies of these psychoactive substances were undertaken in recent years [1,2,3,4,5,6,7].
Synthetic cathinones are a broad group of “designer drugs“. Biological effects of their action are similar to those caused by amphetamine or cocaine [8, 9]. They are marketed either as collectibles (“not suitable for human consumption”) or as “research chemicals”. Synthetic cathinones are akin to amphetamines, and the only difference between synthetic cathinones and the respective amphetamines is the presence of a carbonyl group in the β-position with respect to the amino group in cathinone derivatives. For this reason, synthetic cathinones are called bk-amphetamines. Since cathinone is a β-keto derivative of amphetamine, it stimulates and shows sympathomimetic action upon the central nervous system. The action of cathinone and its derivatives relies mainly on inhibiting reuptake of neurotransmitters; this results in their increased concentration in the inter-synaptic space and stronger activation of cathinone-sensitive receptors. Additionally, relatively strong inhibitory actions of cathinone derivatives towards monoamine oxidase (MAO) and higher selectivity of the cathinone derivatives toward MAO-B isoenzyme have been reported [10]. Inhibition of the isoenzyme, normally metabolizing dopamine, prevents degradation of the important neurotransmitter. It can be assumed that synthetic cathinones show affinity towards monoamine transporters responsible for endogenous amines, such as serotonin or dopamine, by increasing their concentration in inter-synaptic space [11, 12]. Health effects of various market-available synthetic cathinones can differ. Peripheral nervous system effects of cathinone derivative abusers include dilated pupils, elevated blood pressure or hyperthermia. Psychoactive effects of these compounds include states of increased excitement, elevated assertiveness, euphoria, better concentration, anxiety, restlessness or hallucinations. Withdrawal symptoms include sleeplessness, irritability, concentration problems, depression and various psychoses. Long-term abuse of cathinone derivatives may be destructive for both nervous as well as blood vascular systems and may result in irreversible mental disorders. The literature reports and subjective accounts of cathinone derivative abusers have cited occurrence of panic attacks, convulsions, hallucinations, aggressive behavior, chest pain, hypothermia and many other symptoms, which are sometimes life-threatening [1, 13,14,15,16,17,18].
In this study, we performed identification and physicochemical characterization of two cathinone derivatives, 4-FPD and 4-MEAP (Fig. 1), found as market-available materials. To characterize both substances, data were obtained by electrospray ionization/ion trap mass spectrometry (MS) in MS2 and MS3 modes, gas chromatography–mass spectrometry (GC–MS), infrared (IR), Raman and ultraviolet-visible (UV-VIS) spectroscopies, X-ray crystallography, differential scanning calorimetry (DSC) and nuclear magnetic resonance (NMR) spectroscopy. To our knowledge, this is the first comprehensive report detailing identification and characterization of 4-FPD and 4-MEAP, two cathinones available on the NPS market, though some selected data for 4-MEAP have been available previously [19, 20].
Materials and methods
Chemicals
All reagents used were of the HPLC and MS grade. Water (Chromasolv), methanol, deuterated dimethyl sulfoxide (DMSO-d 6 for NMR analysis) were purchased from Sigma-Aldrich (Poznań, Poland).
Sample preparation
The analyzed samples were purchased in Poland in mid-2017 from an Internet vendor. Both samples were delivered in powdered forms, which were found pure without any additive by some spectroscopies and chromatographies. The samples were sold as “4-FPD” (compound 1) and “4-methyl pentedrone” (compound 2) and were thus analyzed without any purification. For gas chromatography studies, a 10-mg aliquot of each sample was dissolved in 1 mL methanol by ultrasonication (10 min). Each 10 µL aliquot of such solution was collected and diluted 100-fold with methanol and analyzed. For NMR spectroscopic analysis, 10 mg of the powder sample was dissolved in 0.6 mL DMSO-d 6. For DSC, IR, Raman and UV-VIS studies, 5 mg of each sample was taken. The DSC, IR and Raman analyses were performed without any further sample treatment, and for the UV-VIS analysis the samples were dissolved in methanol, diluted tenfold with methanol before analysis.
GC–MS analysis
For GC–MS analysis, the Thermo Trace Ultra chromatograph was used, coupled with the Thermo DSQ mass spectrometer (Thermo Scientific, Warsaw, Poland). The analyses were carried out using the Rxi®-5Sil MS column (30 m × 0.25 mm i.d., 0.25 μm film thickness; Restek, Bellefonte, PA, USA). The following working parameters were employed: injector temperature, 260 °C; oven temperatures, 100 °C for 2 min, ramp at 20 °C/min to 260 °C; carrier gas (helium) flow rate, 1.2 mL min−1; MS transfer line temperature, 250 °C; MS source temperature, 250 °C; injection volume, 1 μL in the splitless mode. For structural confirmation, electron ionization (EI) mass spectra were matched to an EI-MS library [21].
Electrospray ionization–mass spectrometryn
A Varian MS-500 mass spectrometer with electrospray ionization source (Varian Inc., Palo Alto, CA, USA) was used. The obtained data were processed using MS Workstation software (Varian Inc.). The analytes were electrosprayed in the positive mode (ESI(+)-MS). Fragmentation in the ESI-MS2 and ESI-MS3 mode was carried out in the scanning range of m/z 50–500. The source temperature was 350 °C, and the carrier and ionizing gases were nitrogen and helium, respectively.
NMR spectroscopy
The NMR spectra were recorded using UltraShield 400 MHz apparatus (Bruker, Bremen, Germany) with DMSO-d 6 as solvent. The data were collected with the chemical shifts referenced to a residual solvent signal.
Fourier transform infrared, Raman and UV-VIS spectroscopies
Each IR spectrum (wavenumber range 3500–400 cm−1) of each evidence material was acquired using a Nicolet iS50 FT-IR spectrometer (Thermo Scientific) and the attenuated total reflectance technique. Raman measurements were performed using a Thermo Scientific™ DXR™2xi Raman imaging microscope equipped with a 780 nm laser (Thermo Scientific). UV-VIS absorption spectra of methanol-dissolved samples were recorded using the PerkinElmer Lambda Bio 40 UV-Vis spectrometer (λ = 200–1000 nm) (PerkinElmer, Kraków, Poland).
Differential scanning calorimetry
DSC was performed with a TA-DSC 2010 apparatus (TA Instruments, New Castle, DE, USA) under nitrogen using aluminum sample pans in a temperature range from 20 °C to over the clearing point.
X-ray spectroscopy
The single crystal X-ray experiments for both compounds were performed at 100 K. The data were collected using a SuperNova kappa diffractometer with Atlas CCD detector (Agilent Technologies, Santa Clara, CA, USA). For the integration of the collected data, the CrysAlisPro software (version 1.171.38.41q, 2015; Rigaku Oxford Diffraction, Sevenoaks, UK) was used. The solving and refining procedures were similar for both compounds. The structures were solved using direct methods with the SHELXS97 software, and the solutions were refined using SHELXL-2014/7 program [22]. CCDC 1573894-1573895 contains supplementary crystallographic data for this paper. These data can be obtained free of charge from The Cambridge Crystallographic Data Centre via: http://www.ccdc.cam.ac.uk/data_request/cif.
Results and discussion
GC–MS and ESI-MSn
The samples were analyzed by GC–MS, and the resulting mass spectra of compounds 1 and 2 are shown in Fig. 2. The spectra were subjected to examination whether they hit specific compounds in the EI-MS library; as results compounds 1 and 2 were found to be possibly 4-FPD and 4-MEAP, respectively.
In the mass spectra obtained in the EI-MS mode, each main fragment ion was detected for compounds 1 and 2 at m/z 86 and 100, respectively. Other less intense fragments present in the spectra were at m/z 95 and 123 for 4-FPD (1) and at m/z 91 and 119 for 4-MEAP (2). Possible structures of the fragmentation products derived from the parent structures of compounds 1 and 2 are presented in Fig. 3, and were in accordance with reported fragmentation pathways of other cathinone derivatives [23]. The obtained spectra were almost identical with those originating from 4-FPD and 4-MEAP standards [20, 21]. Also, comparison of our data with those for a well-known stimulant pentedrone has revealed the presence of the same base peak (m/z 86) in the case of compound 1, which suggests bond cleavage between carbon atoms 1 and 2 (carbon numbering shown in Fig. 1). The difference of 14 Da between m/z 86 (4-FPD and pentedrone) and m/z 100 (4-MEAP) corresponds well with the presence of an additional methyl group in compound 2. Furthermore, other differences in m/z values seen in the mass spectra of compounds 1 and 2 result from the presence of different moieties, as compared to pentedrone, confirming validity of the proposed fragmentation pathways.
In the ESI-MS spectrum, the protonated molecule [M+H]+ was seen at m/z 210 for compound 1 (4-FPD) and at m/z 220 for compound 2 (4-MEAP). The samples were also analyzed by tandem and triple stage mass spectrometry (MS2 and MS3), using direct infusion. In the MS2 mode, elimination of a water molecule for both compounds was observed [M+H-H2O]+, which is characteristic for cathinone derivatives [24]. The probable fragmentation pathways in the MS2 and MS3 modes for 1 and 2 are presented in Fig. 4. The above analyses of the spectra by both EI-MS and ESI-MSn further support the idea that compounds 1 and 2 are 4-FPD and 4-MEAP, respectively.
1H and 13C NMR spectroscopy
NMR spectroscopy was employed to confirm the structures of investigated compounds. The data for compounds 1 and 2 are presented in Tables 1 and 2, respectively (atom numbering according to Fig. 1).
Because of interaction of protons with fluorine in the 4-FPD molecule, instead of a classical set of signals in 1H NMR spectrum in the aromatic region (i.e., dd), a number of multiplets were observed for each group of equivalent protons. Also in the 13C NMR spectrum, the coupling of carbon with the fluorine atom could be observed that explains splitting in the carbon signals (Table 1). The 1H and 13C NMR spectra for compounds 1 and 2 are available in the electronic supplementary material (Figs. S1–S4). The NMR data confirmed the identification of compounds 1 and 2 to be 4-FPD and 4-MEAP, respectively.
IR, Raman and UV-VIS spectra
IR and Raman techniques can be useful in characterizing designer cathinones, especially identifying characteristic functional groups. In the IR spectra, a strong carbonyl stretch at 1688 cm−1 was observed for both compounds. Also, the aliphatic and aromatic C–H stretching at 2700–3000 cm−1 and the amine hydrochloride salt bands can be observed for both compounds. Characteristic C–C vibrations in an aromatic ring appeared at 1598 and 1605 cm−1 for 4-FPD (1) and 4-MEAP (2), respectively. In the Raman spectroscopy, strong C=O bands were observed at 1690 cm−1 for both compounds. The C–C aromatic bands in the Raman spectra gave actually the same wavenumber values as in the IR spectra. Both IR and Raman spectra were very similar for compounds 1 and 2. This is probably due to structural similarity of the investigated compounds. The IR and Raman spectra for compounds 1 and 2 are available in the electronic supplementary material (Figs. S5–S8). The UV spectra recorded by UV-VIS spectrometry showed absorption maxima at 253 and 265 nm for the compounds 1 and 2, respectively.
Melting points
Melting points for compounds 1 (4-FPD hydrochloride) and 2 (4-MEAP hydrochloride) obtained by DSC analysis were 245 and 223 °C, respectively; those measured in the classical way were 243–245 °C and 220–222 °C, respectively. Both compounds melted with decomposition.
X-ray studies
Crystal data and structure refinements for both compounds are summarized in Table 3. The molecular structures of compounds 1 (4-FPD hydrochloride) and 2 (4-MEAP hydrochloride) are shown in Fig. 5. Packing diagrams for both compounds are shown in Fig. 6. All distances, angles and planarity of ring systems are typical. In the crystals of both compounds, a racemic mixture was present. Compounds 1 and 2 have two enantiomeric ion pairs in the unit of the crystal lattices.
Compound 1
Two aromatic rings are laid above each other (Fig. 7) with centroid distance equal to 3.734 Å (109.22° angle), in parallel planes separated by 3.473 Å. The shortest distance between oxygen and carbon atoms in the N-methyl group of the adjacent molecule was 3.185 Å. The structure featured many other weak hydrogen interactions, for example: NH1A···O1 distance (2.554 Å); NH1B···O1 distance (2.629 Å) and C13H···O1 distance (2.719 Å), all of them shorter than the sum of the van der Waals radii. The shortest distance between the hydrogen atom of the methane group and Cl− ion was 2.606 Å, which is smaller than the sum of the van der Waals radii (2.96 Å). Equally short distances between hydrogen as well as nitrogen atoms and Cl− ions can be found in the structure of this compound (the shortest NH···Cl− = 2.240 Å and N···Cl− = 3.060 Å with the sum of van der Waals radii = 2.95 and 3.30 Å, respectively). Other short distances occurring in the structure of compound 1 are shown in Fig. S9.
Compound 2
The structure of compound 2 lacked strong hydrogen bonds. Weak hydrogen bonds occur inside the molecule in the crystal lattice: O1 ··· H13B distance was 2.825 Å; the distances between oxygen atom and two hydrogen atoms in the amine group were: O1···H1B = 2.574 Å and O1 ··· H1A = 2.576 Å, respectively. Of note, molecules of this compound can form pairs in which the CH···π, bond may occur, which is shown in Fig. 8. Lengths of these bonds were: center of aromatic ring—hydrogen in the aromatic methyl group = 2.935 Å (131.91o angle). Aromatic rings lay in parallel planes separated by a distance of 3.460 Å. Several C–H···Cl and N–H···Cl short distances testifying to the presence of interactions between molecules or their fragments are shown in Fig. S10.
Conclusions
Dynamic growth in the number of psychoactive substances available on the designer drug markets makes it compulsory to obtain analytical data allowing unequivocal identification of these drugs in the fastest possible way. This is of paramount importance for both law enforcement agencies and for forensic toxicologists. In the present paper we report physicochemical characteristics of two cathinone derivatives (4-FPD and 4-MEAP). Both compounds were characterized using an ESI/ion trap MS in MS2 and MS3 modes, GC–MS, IR, Raman and UV–VIS spectroscopies, DSC, NMR spectroscopy and X-ray crystallography. Our report is linked to the CCDC repository entry of the compound, where its characteristic data can be found, including elementary cell data particularly useful in quick analysis. Although some evidence has been available for 4-MEAP previously (GC–MS, IR and NMR) [19, 20], to our knowledge this study offers the first detailed and comprehensive data for 4-FPD and 4-MEAP.
References
Zawilska J, Wojcieszak J (2013) Designer cathinones—an emerging class of novel psychoactive substances. Forensic Sci Int 231:42–53
Adamowicz P, Geroń J, Gil D, Lechowicz W, Skulska A, Tokarczyk B (2016) The prevalence of new psychoactive substances in biological material—a three-year review of casework in Poland. Drug Test Anal 8:63–70
Nycz JE, Malecki G, Zawiazalec M, Pazdziorek T (2011) X-ray structures and computational studies of several cathinones. J Mol Struct 1002:10–18
Nycz JE, Pazdziorek T, Malecki G, Szala M (2016) Identification and derivatization of selected cathinones by spectroscopic studies. Forensic Sci Int 266:416–426
Zawilska J, Wojcieszak J (2017) α-Pyrrolidinophenones: a new wave of designer cathinones. Forensic Toxicol 35:201–216
Błażewicz A, Bednarek E, Sitkowski J, Popławska M, Stypułkowska K, Bocian W, Kozerski L (2017) Identification and structural characterization of four novel synthetic cathinones: α-methylaminohexanophenone (hexedrone, HEX), 4-bromoethcathinone (4-BEC), 4-chloro-α-pyrrolidinopropiophenone (4-Cl-PPP), and 4-bromo-α-pyrrolidinopentiophenone (4-Br-PVP) after their seizures. Forensic Toxicol 35:317–332
Kuś P, Kusz J, Książek M, Pieprzyca E, Rojkiewicz M (2017) Spectroscopic characterization and crystal structures of two cathinone derivatives: N-ethyl-2-amino-1-phenylpropan-1-one (ethcathinone) hydrochloride and N-ethyl-2-amino-1-(4-chlorophenyl)propan-1-one (4-CEC) hydrochloride. Forensic Toxicol 35:114–124
Valente MJ, Guedes de Pinho P, de Lourdes Bastos M, Carvalho F, Carvalho M (2014) Khat and synthetic cathinones: a review. Arch Toxicol 88:15–45
Prosser JM, Nelson LS (2012) The toxicology of bath salts: a review of synthetic cathinones. J Med Toxicol 8:33–42
Osorio-Olivares M, Rezende MC, Sepúlveda-Boza S, Cassels BK, Fierro A (2004) MAO inhibition by arylisopropylamines: the effect of oxygen substituents at the β-position. Bioorg Med Chem 12:4055–4066
Liechti M (2015) Novel psychoactive substances (designer drugs): overview and pharmacology of modulators of monoamine signaling. Swiss Med Wkly 145:w14043. https://doi.org/10.4414/smw.2015.14043
Baumann MH, Solis E, Watterson LR, Marusich JA, Fantegrossi WE, Wiley JL (2014) Bath salts, spice, and related designer drugs: the science behind the headlines. J Neurosci 34:15150–15158
Baumann MH, Partilla JS, Lehner KR (2013) Psychoactive “bath salts”: not so soothing. Eur J Pharmacol 698:1–5
German CL, Fleckenstein AE, Hanson GL (2014) Bath salts and synthetic cathinones: an emerging designer drug phenomenon. Life Sci 97:2–8
Lewin AH, Seltzman HH, Carroll FI, Mascarella SW, Reddy PA (2014) Emergence and properties of spice and bath salts: a medicinal chemistry perspective. Life Sci 97:9–19
Gregg RA, Rawls SM (2014) Behavioral pharmacology of designer cathinones: a review of the preclinical literature. Life Sci 97:27–30
Glennon RA, Dukat M (2017) Synthetic cathinones: a brief overview of overviews with applications to the forensic sciences. Ann Forensic Res Anal 4(2):1040. https://www.jscimedcentral.com/Forensic/forensic-4-1040.pdf
Romanek K, Stenzel J, Schmoll S, Schrettl V, Geith S, Eyer F, Rabe C (2017) Synthetic cathinones in Southern Germany—characteristics of users, substance-patterns, co-ingestions, and complications. Clin Toxicol 55:573–578
Hamby D, Burnett A, Jablonsky M, Twamley B, Kavanagh PV, Gardner EA (2015) Identification of 2-(ethylamino)-1-(4-methylphenyl)-1-pentanone (4-MEAP), a new “legal high” sold by an Internet vendor as 4-methyl pentedrone. J Forensic Sci 60:721–726
National Forensic Laboratory, Slovenia (2016) Analytical report: 4-MEAP. http://www.policija.si/apps/nfl_response_web/0_Analytical_Reports_final/4-MEAP-ID-1696-16rpt271016.pdf. Accessed August 2017
Cayman Chemical (2016) Cayman spectral library. https://www.caymanchem.com/gcms/9002182-0464459-GCMS.pdf. Accessed August 2017
Sheldrick GM (2015) Crystal structure refinement with SHELXL. Acta Cryst C 71:3–8
Matsuta S, Katagi M, Nishioka H, Kamata H, Sasaki K, Shima N, Kamata T, Miki A, Tatsuno M, Zaitsu K, Tsuboi K, Tsuchihashi H, Suzuki K (2014) Structural characterization of cathinone-type designer drugs by EI mass spectrometry (in Japanese with English abstract). Jpn J Forensic Sci Technol 19:77–89
Fornal E (2014) Study of collision-induced dissociation of electrospray-generated protonated cathinones. Drug Test Anal 6:705–715
Acknowledgements
We wish to thank Dr. Sławomir Maślanka for DSC measurement and Dr. Barbara Hachuła for IR and Raman spectra measurement.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Ethical approval
This article does not contain any studies with human participants or animals performed by any of the authors.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Rojkiewicz, M., Kuś, P., Kusz, J. et al. Spectroscopic and crystallographic characterization of two cathinone derivatives: 1-(4-fluorophenyl)-2-(methylamino)pentan-1-one (4-FPD) hydrochloride and 1-(4-methylphenyl)-2-(ethylamino)pentan-1-one (4-MEAP) hydrochloride. Forensic Toxicol 36, 141–150 (2018). https://doi.org/10.1007/s11419-017-0393-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11419-017-0393-6