Abstract
It is costly and time consuming to use machining processes, such as grinding, polishing and lapping, to produce optical glass lenses with complex features. Precision glass molding (PGM) has thus been developed to realize an efficient manufacture of such optical components in a single step. However, PGM faces various technical challenges. For example, a PGM process must be carried out within the super-cooled region of optical glass above its glass transition temperature, in which the material has an unstable non-equilibrium structure. Within a narrow window of allowable temperature variation, the glass viscosity can change from 105 to 1012 Pa$s due to the kinetic fragility of the super-cooled liquid. This makes a PGM process sensitive to its molding temperature. In addition, because of the structural relaxation in this temperature window, the atomic structure that governs the material properties is strongly dependent on time and thermal history. Such complexity often leads to residual stresses and shape distortion in a lens molded, causing unexpected changes in density and refractive index. This review will discuss some of the central issues in PGM processes and provide a method based on a manufacturing chain consideration from mold material selection, property and deformation characterization of optical glass to process optimization. The realization of such optimization is a necessary step for the Industry 4.0 of PGM.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Fischer R E, Tadic-Galeb B, Yoder P R. Optical System Design. New York: McGraw-Hill, 2008
Erdenebat M U, Kwon K C, Dashdavaa E, et al. Advanced 360-degree integral-floating display using a hidden point removal operator and a hexagonal lens array. Journal of the Optical Society of Korea, 2014, 18(6): 706–713
Li J, Hu S, Zhao L. Study of the influence of the shape of projection lens focal plane on the focus control of advanced lithography. Optik—International Journal for Light and Electron Optics, 2014, 125(22): 6775–6777
Tsai C M, Fang Y C, Hsiang C Z. A study of optical design and optimization applied to lens module of laser beam shaping of advanced modern optical device. Laser Beam Shaping XII, 2011, 81300W
Zhang Y, Milster T D, Kim J S, et al. Advanced lens design for bitwise volumetric optical data storage, Japanese Journal of Applied Physics, 2004, 43(7): 4929–4936
Harriott L R. Limits of lithography. Proceedings of IEEE, 2001, 89 (3): 366–374
Kneer B, Migura S, Kaiser W, et al. EUV lithography optics for sub-9 nm resolution. Extreme Ultraviolet (Euv) Lithography VI, 2015, 94221G
Jia Y, Li Y, Liu L, et al. A method for compensating the polarization aberration of projection optics in immersion lithography. In: Proceedings of 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro-and Nano-Optical Devices and Systems. 2014, 928309
Voelkel R. Micro-optics: Enabling technology for illumination shaping in optical lithography. Optical Microlithography XXVII, 2014, 90521U
Wagner C, Harned N. EUV lithography: Lithography gets extreme. Nature Photonics, 2010, 4(1): 24–26
Yumoto H, Mimura H, Koyama T, et al. Focusing of X-ray freeelectron laser pulses with reflective optics. Nature Photonics, 2013, 7(1): 43–47
Strelkov V V. High-order optical processes in intense laser field: Towards nonperturbative nonlinear optics. Physical Review A, 2016, 93(5): 053812
Dong B, Wang R. Laser beam cleanup using improved model-based wavefront sensorless adaptive optics. Chinese Optics Letters, 2016, 14(3): 031406–031409
Holly C, Traub M, Hoffmann D, et al. Monocrystalline CVDdiamond optics for high-power laser applications. High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications, 2016, V, 974104
Clampin M. Recent progress with the JWST observatory. Space Telescopes and Instrumentation 2014: Optical, Infrared, and Millimeter Wave, 2014, 914302
Rao C, Zhu L, Rao X, et al. Second generation solar adaptive optics for 1-m new vacuum solar telescope at the Fuxian solar observatory. Chinese Optics Letters, 2015, 16(2): 1–3
Hashiguchi D H, Murder J M, Paquin R A. The evolution of beryllium space telescope optics. SAMPE Journal, 2015, 51(6): 40–48
Lousberg G P, Moreau V, Schumacher J M, et al. Design and analysis of an active optics system for a 4-m telescope mirror combining hydraulic and pneumatic supports. Optical Systems Design 2015: Optical Design and Engineering VI, 2015, 962624
Matsusaka K, Ozawa S, Yoshida R, et al. Ultracompact optical zoom lens for mobile phone. Digital Photography III, 2007, 650203
Shieh H P D, Huang Y P, Chien KW. Micro-optics for liquid crystal displays applications. Journal of Display Technology, 2005, 1(1): 62–76
Fang Y C, Tsai H L, Chien Y H, et al. 2X optical digital zoom lens with short total length and extremely small front aperture for twomillion-pixel CMOS on mobile phones. In: Proceedings of SPIE International Optical Design Conference 2006. 2006, 6342: I3421–I3421
Brinksmeier E, Mutlugunes Y, Klocke F, et al. Ultra-precision grinding. CIRP Annals—Manufacturing Technology, 2010, 59(2): 652–671
Cheung C F, Ho L T, Charlton P, et al. Analysis of surface generation in the ultraprecision polishing of freeform surfaces. In: Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture. 2010, 224(1): 59–73
Komanduri R, Lucca D A, Tani Y. Technological advances in fine abrasive processes. CIRP Annals—Manufacturing Technology, 1997, 46(2): 545–596
Suzuki H, Hamada S, Okino T, et al. Ultraprecision finishing of micro-aspheric surface by ultrasonic two-axis vibration assisted polishing. CIRP Annals—Manufacturing Technology, 2010, 59(1): 347–350
Doetsch R N. History of Microscope. Science, 1961, 133(3456): 946–947
Herzberg M. History of Image of Microscope. Optik (Stuttgart), 1973, 39: 93–98
Cohen I B. The History of the Telescope. Henry C. King. Isis, 1957, 48(3): 357–358
Gonick L, Alschuler W. A brief history of the telescope. Science, 2009, 323(5912): 330–331
Warner D J. An acre of glass: A history and forecast of the telescope. Technology and Culture, 2007, 48(1): 231–232
Konig W, Koch N. Aspherical glass surfaces and options for their production. Feinwerktechnik & Messtechnik, 1990, 98: 254–258
Nicholas D J, Boon J E. The generation of high precision aspherical surfaces in glass by CNC machining. Journal of Physics D: Applied Physics, 1981, 14(4): 593–600
Optics J D R P. Precision Glass Molding Technical Brief. Rochester Precision Optics, 2007, 1–17
Lkawa N, Donaldson R R, Komanduri R, et al. Ultraprecision metal cutting—The past, the present and the future. CIRP Annals —Manufacturing Technology, 1991, 40(2): 587–594
Nakasuji T, Kodera S, Hara S, et al. Diamond turning of brittle materials for optical components. CIRP Annals—Manufacturing Technology, 1990, 39(1): 89–92
Fang F, Liu X, Lee L C. Micro-machining of optical glasses—A review of diamond-cutting glasses. Sadhana, 2003, 28: 945–955
Yi A Y, Jain A. Compression molding of aspherical glass lenses—A combined experimental and numerical analysis. Journal of the American Ceramic Society, 2005, 88(3): 579–586
Aono Y, Negishi M, Takano J. Development of large-aperture aspherical lens with glass molding. Advanced Optical Manufacturing and Testing Technology, 2000, (4231): 16–23
Muranaka M, Noro Y, Takagi M, et al. Precise aspherical plastic lens for electronic appliances—Molding technology and applications. In: Lemstra P J, Kleintjens L A, eds. Integration of Fundamental Polymer Science and Technology. 1991, 5: 385–389
Liu W, Zhang L. Thermoforming mechanism of precision glass moulding. Applied Optics, 2015, 54(22): 6841–6849
Schaub M, Schwiegerling J, Fest E C, et al. Molded Optics Design and Manufacture. New York: CRC Press, 2011
Thorlabs. https://www.thorlabs.hk/navigation.cfm, 2016 (in Chinese)
Nelson J, Scordato M, Schwertz K, et al. Precision lens molding of asphero diffractive surfaces in chalcogenide Materials. Optifab 2015, 2015, 96331L
Mahajan P, Dora P T, Sandeep T S, et al. Optimized design of optical surface of the mold in precision glass molding using the deviation approach. International Journal for Computational Methods in Engineering Science and Mechanics, 2015, 16(1): 53–64
Su L J, Chen Y, Yi A Y, et al. Refractive index variation in compression molding of precision glass optical components. Applied Optics, 2008, 47(10): 1662–1667
Su L J, Wang F, He P, et al. An integrated solution for mold shape modification in precision glass molding to compensate refractive index change and geometric deviation. Optics and Lasers in Engineering, 2014, 53: 98–103
Tseng S F, Lee C T, Huang K C, et al. Mechanical properties of Pt-Ir and Ni-Ir Binary alloys for glass-molding dies coating. Journal of Nanoscience and Nanotechnology, 2011, 11(10): 8682–8688
Bernhardt F. Faster mold coating tests make glass processing more efficient. Photonics Spectra, 2013, 47(8): 36–39
Zhao W, Chen Y, Shen L G, et al. Refractive index and dispersion variation in precision optical glass molding by computed tomography. Applied Optics, 2009, 48(19): 3588–3595
Fotheringham U, Baltes A, Fischer P, et al. Refractive index drop observed after precision molding of optical elements: A quantitative understanding based on the Tool-Narayanaswamy-Moynihan model. Journal of the American Ceramic Society, 2008, 91(3): 780–783
Sojecki A. Changes of the refractive index during the moulding process. Optical Manufacturing and Testing, 1995, 2536: 475–477
Yan J, Oowada T, Zhou T, et al. Precision machining of microstructures on electroless-plated NiP surface for molding glass components. Journal of Materials Processing Technology, 2009, 209(10): 4802–4808
Hou J, Wang C, Bai Y. Research on crafts of Ni-P-SiC electroless composite plating on surface performances of the mould. Advanced Polymer Science and Engineering, 2011, 221: 389–393
Sawa Y, Yamashita K, Kitadani T, et al. Fabrication of high hardness Ni mold with electroless nickel-boron thin layer. Microsystem Technologies, 2010, 16(8–9): 1369–1375
Chon K S, Namba Y. Single-point diamond turning of electroless nickel for flat X-ray mirror. Journal of Mechanical Science and Technology, 2010, 24(8): 1603–1609
Yamaguchi T, Higuchi M, Shimada S, et al. Tool life monitoring during the diamond turning of electroless Ni-P. Precision Engineering, 2007, 31(3): 196–201
Parkinson B R. Status of the nickel plating and electroforming industry. Transactions of the Metal Finishers Association of India, 1996, 5: 231–236
Chao C L, Chang C J, Chen C C, et al. Precision grinding of tungsten carbide mold insert for molding of sub-millimeter glass aspheric lenses. In: Proceedings of International Conference on Optics in Precision Engineering and Nanotechnology (ICOPEN2013). 2013, 87691U
Shin J, Tanaka S I, Esashi A. Nanostructured silicon carbide molds for glass press molding. In: Proceedings of 2007 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems. IEEE, 2007, 1–3: 1152–1155
Min K O, Tanaka S, Esashi M. Micro/nano glass press molding using silicon carbide molds fabricated by silicon lost molding. In: Proceedings of 18th IEEE International Conference on Micro Electro Mechanical System. IEEE, 2005, 475–478
Maehara H, Murakoshi H. Quartz glass molding by precision glass molding method. Transactions of the Institute of Electrical Engineers of Japan, 2001, 122(10): 494–497
Liu W D, Liu M, Zhang L C. Oxidation-induced mechanical deterioration and hierarchical cracks in glassy carbon. Carbon, 2016, 100: 178–186
Chang Y Y, Wu C J. Mechanical properties and impact resistance of multilayered TiAlN/ZrN coatings. Surface and Coatings Technology, 2013, 231: 62–66
Hagen J, Burmeister F, Fromm A, et al. Iridium coatings with titanium sub-layer deposited by RF magnetron sputtering: Mechanical properties and contact behavior with RoHS-compliant glass melt. Plasma Processes and Polymers, 2009, 6(S1): S678–S683
Fischbach K D, Georgiadis K, Wang F, et al. Investigation of the effects of process parameters on the glass-to-mold sticking force during precision glass molding. Surface and Coatings Technology, 2010, 205(2): 312–319
Masuda J, Yan J, Zhou T, et al. Thermally induced atomic diffusion at the interface between release agent coating and mould substrate in a glass moulding press. Journal of Physics D: Applied Physics, 2011, 44(21): 215302–215313
Zhu X, Wei J, Chen L, et al. Anti-sticking Re-Ir coating for glass molding process. Thin Solid Films, 2015, 584: 305–309
Vetter J. 60 years of DLC coatings: Historical highlights and technical review of cathodic arc processes to synthesize various DLC types, and their evolution for industrial applications. Surface and Coatings Technology, 2014, 257: 213–240
Bernhardt F, Georgiadis K, Dolle L, et al. Development of a ta-C diamond-like carbon (DLC) coating by magnetron sputtering for use in precision glass molding. Materialwiss Werkst, 2013, 44(8): 661–666
Rieser D, Spie G, Manns P. Investigations on glass-to-mold sticking in the hot forming process. Journal of Non-Crystalline Solids, 2008, 354(12): 1393–1397
Kleer G, Kaiser E, Döll W. Behaviour of Ti-Al-N coatings for tools applied in the thermoplastic moulding of inorganic glasses. Surface & Coatings Technology, 1996, 79(1–3): 95–102
Klocke F, Georgiadis K, Dambon O, et al. A complete qualification methodology for coatings of precision glass molding tools. Optical Manufacturing and Testing IX, 2011, 81260T
Bernhardt F, Georgiadis K, Dambon O, et al. Novel testing facility for investigating wear on PGM sample tools. Optifab 2013, 2013, 88841V
Ananthasayanam B. Computional modeling of precision molding of aspheric glass optics. Dissertation for the Doctoral Degree. Clemson: Clemson University, 2008
Arai M, Kato Y, Kodera T. Characterization of the thermoviscoelastic property of glass and numerical simulation of the press molding of glass lens. Journal of Thermal Stresses, 2009, 32(12): 1235–1255
Jain A, Yi A Y. Numerical modeling of viscoelastic stress relaxation during glass lens forming process. Journal of the American Ceramic Society, 2005, 88(3): 530–535
Ananthasayanam B, Joseph P F, Joshi D, et al. Final shape of precision molded optics: Part I—Computational approach, material definitions and the effect of lens shape. Journal of Thermal Stresses, 2012, 35(6): 550–578
Ananthasayanam B, Joseph P F, Joshi D, et al. Final shape of precision molded optics: Part II—Validation and sensitivity to material properties and process parameters. Journal of Thermal Stresses, 2012, 35(7): 614–636
Tsai Y C, Hung C H, Hung J C. Glass material model for the forming stage of the glass molding process. Journal of Materials Processing Technology, 2008, 201(1–3): 751–754
Sellier M, Hann C E, Siedow N. Identification of relaxation functions in glass by mean of a simple experiment. Journal of the American Ceramic Society, 2007, 90(9): 2980–2983
Richter F. Upsetting and viscoelasticity of vitreous SiO2: Experiments, interpretation and simulation. Dissertation for the Doctoral Degree. Berlin: Technical of University of Berlin, 2006
Liu W D, Ruan H H, Zhang L C. Revealing structural relaxation of optical glass through the temperature dependence of Young’s modulus. Journal of the American Ceramic Society, 2014, 97(11): 3475–3482
Dyre J C, Olsen N B, Christensen T. Local elastic expansion model for viscous-flow activation energies of glass-forming molecular liquids. Physical Review B: Condensed Matter and Materials Physics, 1996, 53(5): 2171–2174
Yi A Y, Tao B, Klocke F, et al. Residual stresses in glass after molding and its influence on optical properties. Procedia Engineering, 2011, 19: 402–406
To Q D, He Q C, Cossavella M, et al. The tempering of glass and the failure of tempered glass plates with pin-loaded joints: Modelling and simulation. Materials & Design, 2008, 29(5): 943–951
Chen Y, Yi A Y, Su L, et al. Numerical simulation and experimental study of residual stresses in compression molding of precision glass optical components. Journal of Manufacturing of Science and Engineering, 2008, 130(5): 051012
Ritland H N. Relation between refractive index and density of a glass at constant temperature. Journal of the American Ceramic Society, 1955, 38(2): 86–88
Tao B, Shen L G, Yi A, et al. Reducing refractive index variations in compression molded lenses by annealing. Optics and Photonics Journal, 2013, 3(02): 118–121
Zhu Y, Wang Y, Na J, et al. A framework of cloud supported collaborative design in glass lens moulds based on aspheric measurement. Current Developments in Lens Design and Optical Engineering XIV, 2013, 88411A
Wu T C, Tsai Y C, Hung C H. Die shape optimization on molding process of optical glass lens. Taoyuan, 2007
Sellier M. Optimal process design in high-precision glass forming. International Journal of Forming Processes, 2006, 9(1): 61–78
Sellier M, Breitbach C, Loch H, et al. An iterative algorithm for optimal mould design in high-precision compression moulding. In: Proceedings of the International of Mechanical Engineering Part B: Journal of Engineering Manufacture. 2007, 221(1): 25–33
Mahajan P, Dora P T, Sandeep T S, et al. Optimized design of optical surface of the mold in precision glass molding using the deviation approach. International Journal for Computational Methods in Engineering Science and Mechanics, 2015, 16(1): 53–64
Sellier M. Optimization in high-precision glass forming. In: Bucchianico A D, Mattheij R M M, Peletier M A, eds. Progress in Industrial Mathematics at ECMI 2004. Berlin: Springer, 2006, 8: 381–385
Kreilkamp H, Staasmeyer J H, Niendorf L. The future of glass optics replication. Optik & Photonik, 2016, 11(3): 28–31
Acknowledgements
The work presented in this paper was financially supported by the Australian Research Council. This research was undertaken with the assistance of resources provided at the NCI National Facility systems at the Australian National University and Intersect Australia Ltd. through the National Computational Merit Allocation Scheme supported by the Australian Government.
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is published with open access at springerlink.fh-diploma.de and journal.hep.com.cn
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Zhang, L., Liu, W. Precision glass molding: Toward an optimal fabrication of optical lenses. Front. Mech. Eng. 12, 3–17 (2017). https://doi.org/10.1007/s11465-017-0408-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11465-017-0408-3