Abstract
Rolling contact fatigue (RCF) issues, such as pitting, might occur on bevel gears because load fluctuation induces considerable subsurface stress amplitudes. Such issues can dramatically affect the service life of associated machines. An accurate geometry model of a hypoid gear utilized in the main reducer of a heavy-duty vehicle is developed in this study with the commercial gear design software MASTA. Multiaxial stress—strain states are simulated with the finite element method, and the RCF life is predicted using the Brown–Miller–Morrow fatigue criterion. The patterns of fatigue life on the tooth surface are simulated under various loading levels, and the RCF S–N curve is numerically generated. Moreover, a typical torque—time history on the driven axle is described, followed by the construction of program load spectrum with the rain flow method and the Goodman mean stress equation. The effects of various fatigue damage accumulation rules on fatigue life are compared and discussed in detail. Predicted results reveal that the Miner linear rule provides the most optimistic result among the three selected rules, and the Manson bilinear rule produces the most conservative result.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Niemann G, Rettig H, Lechner G. Scuffing tests on gear oils in the FZG apparatus. A S L E Transactions, 1961, 4(1): 71–86
Höhn B R, Michaelis K, Doleschel A. Frictional behaviour of synthetic gear lubricants. Tribology Series, 2001, 39: 759–768
He H, Liu H, Zhu C, et al. Study of rolling contact fatigue behavior of a wind turbine gear based on damage-coupled elastic-plastic model. International Journal of Mechanical Sciences, 2018, 141: 512–519
Fernandes P J L, McDuling C. Surface contact fatigue failures in gears. Engineering Failure Analysis, 1997, 4(2): 99–107
Liu H, Liu H, Zhu C, et al. Evaluation of contact fatigue life of a wind turbine gear pair considering residual stress. Journal of Tribology, 2018, 140(4): 041102
Carpinteri A, Spagnoli A, Vantadori S. A review of multiaxial fatigue criteria for random variable amplitude loads. Fatigue & Fracture of Engineering Materials & Structures, 2017, 40(7): 1007–1036
Wang W, Liu H, Zhu C, et al. Effect of the residual stress on contact fatigue of a wind turbine carburized gear with multiaxial fatigue criteria. International Journal of Mechanical Sciences, 2019, 151: 263–273
Wang W, Liu H, Zhu C, et al. Micromechanical analysis of gear fatigue-ratcheting damage considering the phase state and inclusion. Tribology International, 2019, 136: 182–195
Wu Z R, Hu X T, Song Y D. Multiaxial fatigue life prediction for titanium alloy TC4 under proportional and nonproportional loading. International Journal of Fatigue, 2014, 59: 170–175
Zhu S P, Yu Z Y, Correia J, et al. Evaluation and comparison of critical plane criteria for multiaxial fatigue analysis of ductile and brittle materials. International Journal of Fatigue, 2018, 112: 279–288
Litvin F L, Fuentes A, Hayasaka K. Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gears. Mechanism and Machine Theory, 2006, 41(1): 83–118
Sekercioglu T, Kovan V. Pitting failure of truck spiral bevel gear. Engineering Failure Analysis, 2007, 14(4): 614–619
Bhavi I, Kuppast V, Kurbet S. Experimental setup and methodology to carryout fatigue testing of spiral bevel gears used in differential gear box using NVH approach. Applied Mechanics and Materials, 2016, 852: 545–550
Ural A, Heber G, Wawrzynek P A, et al. Three-dimensional, parallel, finite element simulation of fatigue crack growth in a spiral bevel pinion gear. Engineering Fracture Mechanics, 2005, 72(8): 1148–1170
Deng S, Hua L, Han X, et al. Finite element analysis of contact fatigue and bending fatigue of a theoretical assembling straight bevel gear pair. Journal of Central South University, 2013, 20(2): 279–292
Liu F, Wu W, Hu J, et al. Design of multi-range hydro-mechanical transmission using modular method. Mechanical Systems and Signal Processing, 2019, 126: 1–20
Liu S, Song C, Zhu C, et al. Investigation on the influence of work holding equipment errors on contact characteristics of face-hobbed hypoid gear. Mechanism and Machine Theory, 2019, 138: 95–111
Medepalli S, Rao R. Prediction of road loads for fatigue design—A sensitivity study. International Journal of Vehicle Design, 2000, 23(1–2): 161–175
Liu X, Li D, Lv W, et al. Research on analysis approach of strength and fatigue life of horizontal axis wind turbine hub. Acta Energiae Solaris Sinica, 2012, 5: 18–23 (in Chinese)
Shinde V, Jha J, Tewari A, et al. Modified rainflow counting algorithm for fatigue life calculation. In: Seetharamu S, Rao K, Khare R, eds. Proceedings of Fatigue, Durability and Fracture Mechanics. Singapore: Springer, 2018, 381–387
Mayer H, Ede C, Allison J E. Influence of cyclic loads below endurance limit or threshold stress intensity on fatigue damage in cast aluminium alloy 319-T7. International Journal ofFatigue, 2005, 27(2): 129–141
Hu H, Yan Y M. Light bus drive axle design. Applied Mechanics and Materials, 2013, 380–384: 17–22
Carpinteri A, Spagnoli A. Multiaxial high-cycle fatigue criterion for hard metals. International Journal of Fatigue, 2001, 23(2): 135–145
Patra A P, Bidhar S, Kumar U. Failure prediction of rail considering rolling contact fatigue. International Journal of Reliability Quality and Safety Engineering, 2010, 17(03): 167–177
Brown M W, Miller K J. A theory for fatigue failure under multiaxial stress-strain conditions. Proceedings of Institution of Mechanical Engineers, 1973, 187(1): 745–755
Kumbhar S V, Kulkarni V, Tayade R M. Low cycle fatigue analysis of after treatment device induced due to thermal load by using finite element analysis. Applied Mechanics and Materials, 2014, 592–594: 1104–1108
Wen B Z, Li J M, Pei Z T, et al. Statistical analysis of loader’s drive axle housing random load spectrum. Advanced Materials Research, 2011, 338: 456–459
Grubisic V, Fischer G, Heinritz M. Design Optimization of Forged Wheel Hubs for Commercial Vehicles. SAE Technical Paper 841706, 1984
Batsoulas Nikolaos D. Cumulative Fatigue Damage: CDM-Based Engineering Rule and Life Prediction Aspect. Steel Research International, 2016, 87(12): 1670–1677
Rege K, Pavlou D G. A one-parameter nonlinear fatigue damage accumulation model. International Journal of Fatigue, 2017, 98: 234–246
Zhao L H, Cai H C, Wang T, et al. Durability assessment of automotive structures under random variable amplitude loading. Advances in Mechanical Engineering, 2018, 10(4): 1687814018771766
Han Q, Guo Q, Yin Y, et al. Effects of strain ratio on fatigue behavior of G20Mn5QT cast steel. Transactions of Tianjin University, 2016, 22(4): 302–307
Acknowledgements
The work was supported by the National Natural Science Foundation of China (Grant No. U1864210), the Open Foundation of the State Key Laboratory of Mechanical Transmissions (Grant No. SKLMT-KFKT-201701), and Chongqing Research Program of Basic Research and Frontier Technology (Grant No. cstc2017jcyjAX0103).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
The images or other third-party materials in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If a material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Jia, P., Liu, H., Zhu, C. et al. Contact fatigue life prediction of a bevel gear under spectrum loading. Front. Mech. Eng. 15, 123–132 (2020). https://doi.org/10.1007/s11465-019-0556-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11465-019-0556-8