Abstract
Using a center etched single mode optical fiber, a simple vibration senor is designed to monitor the vibrations of a simply supported beam. The sensor has high linear response to the axial displacement of about 0.8 mm with a sensitivity of 32 mV/10 μm strain. The sensor is tested for periodic and suddenly released forces, and the results are found to coincide with the theoretical values. This simple design, small in size and low cost sensor may find applications in industry and civil engineering to monitor the vibrations of the beam structures and bridges.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. D. Yau, “Vibration of simply supported compound beams to moving loads,” Journal of Marine Science and Technology, vol. 12, no. 4, pp. 319–328, 2004.
D. Wang, T. Li, and Z. Yuan, “The simulated analysis based on EMD and shape factor to identify damage location of a simple supported beam steel bridge,” in International Conference on Digital Manufacturing & Automation, Qinhuangdao, China, Dec. 18–20, pp. 808–810, 2010.
L. Meirovitch, Elements of vibration analysis, Second edition. New York, USA: McGraw-Hill, 1986.
K. S. C. Kuang, W. J. Cantwell, and P. J. Scully, “An evaluation of a novel plastic optical fiber sensor for axial strain and bend measurements,” Measurement Science and Technology, vol. 13, no. 10, pp. 1523–1534, 2002.
C. H. Chen, Y. L. Shen, and C. S. Shin, “Using distributed Brillouin fiber sensor to detect the strain and cracks of steel structures,” Journal of Mechanics, vol. 26, no. 4, pp. 547–551, 2010.
M. Zhang, X. Ma, L. Wang, S. Lai, H. Zhou, H. Zhao, et al., “Progress of optical fiber sensors and its application in harsh environment,” Photonic Sensors, vol. 1, no. 1, pp. 84–89, 2011.
W. R. Habel and K. Krebber, “Fiber-optic sensor applications in civil and geotechnical engineering,” Photonic Sensors, vol. 1, no. 3, pp. 268–280, 2011.
P. Roriz, A. Ramos, J. L. Santos, and J. A. Simoes, “Fiber optic intensity-modulated sensors: a review in biomechanics,” Photonic Sensors, vol. 2, no. 4, pp. 315–330, 2012.
J. F. Murphy, “Transverse vibration of a simply supported beam with symmetric overhang of arbitrary length,” Journal of Testing and Evaluation, vol. 25, no. 5, pp. 552–524, 1997.
S. M. J. Ali and Z. S. Al-Sarraf, “Study the transverse vibration of beam with different length,” Al-Rafidain Engineering Journal, vol. 17, no. 1, pp. 83–91, 2009.
S. Timoshenko and D. H. Young, Vibration problems in engineering, Third edition. New Delhi: East-West Press Pvt. Ltd., 1964.
W. A. Nash, Schaum's outline of theory and problems of strength of materials, Fourth edition. New York, USA: McGraw-Hill, 1998.
S. M. Abdullah, “Free vibration of simply supported beams using Fourier series,” Al-Rafidain Engineering Journal, vol. 14, no. 2, pp. 51–67, 2006.
S. G. Kelly, Fundamentals of mechanical vibrations, International editions. New York, USA: McGraw-Hill, 1993.
M. Vaziri and C. L. Chen, “Etched fibers as strain gauges,” Journal of Lightwave Technology, vol. 10. no. 6, pp. 836–841, 1992.
Y. Zaatar, D. Zaouk, J. Bechara, A. Khoury, C. Llinaress, and J. P. Charles, “Fabrication and characterization of an evanescent wave fiber optic sensor for air pollution control,” Materials Science and Engineering: B, vol. 74, no. 1, pp. 296–298, 2000.
X. Tian, X. Cheng, W. Qiu, Y. Luo, Q. Zhang, B. Zhu, et al., “Optically tunable polarization state of propagating light at 1550 nm in an etched single-mode fiber with azo-polymer overlay,” IEEE Photonics Technology Letters, vol. 23, no. 3, pp. 170–172, 2011.
P. Wang, Q. Wang, G. Farrell, G. Rajan, T. Frier, and J. Cassidy, “Investigation of macro bending losses of standard single mode fiber with small bend radii,” Microwave and Optical Technology Letters, vol. 49, no. 9, pp. 2133–2138, 2007.
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is published with open access at Springerlink.com
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Putha, K., Dantala, D., Kamineni, S. et al. Etched optical fiber vibration sensor to monitor health condition of beam like structures. Photonic Sens 3, 124–130 (2013). https://doi.org/10.1007/s13320-013-0106-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13320-013-0106-7