Abstract
The acoustic emission signal of laser plasma shock wave, which comes into being when femtosecond laser ablates pure Cu, Fe, and Al target material, has been detected by using the fiber Fabry-Perot (F-P) acoustic emission sensing probe. The spectrum characters of the acoustic emission signals for three kinds of materials have been analyzed and studied by using Fourier transform. The results show that the frequencies of the acoustic emission signals detected from the three kinds of materials are different. Meanwhile, the frequencies are almost identical for the same materials under different ablation energies and detection ranges. Certainly, the amplitudes of the spectral character of the three materials show a fixed pattern. The experimental results and methods suggest a potential application of the plasma shock wave on-line measurement based on the femtosecond laser ablating target by using the fiber F-P acoustic emission sensor probe.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. I. Anisimov, B. L. Kapeliovich, and T. L. Perelman, “Electron emission from metal surfaces exposed to ultrashort laser pules,” Zhurnal Eksperimentalnoi I Teroreticheskoi Fiziki, 1974, 66(776): 776–781.
A. Rosencwaig and A. Gersho, “Theory of the photo acoustic effect with solids,” Photoacoustic Effect: Vieweg, 1984, 1(6): 631–636.
J. S. Lv and H. Qi. “Multi-wavelength narrow line width fiber laser based on distributed feed back fiber lasers,” Photonic Sensors, 2016, 6(3): 256–260.
V. Blonskij, V. A. Thaoryk, and M. L. Shendeleva, “Thermal diffusivity of solids determination by photo acoustic piezoelectric technique,” Journal of Applied Physics, 2003, 93(1): 790.
P. Sprangle, J. R. Penano, B. Hafizi, R. F. Hubbard, A. Ting, D. F. Gordon, et al., “Propagation of ultra-short, intense laser pulses in air,” Physics of Plasmas, 2004, 11(5): 2865–2874.
J. K. Chen, J. E. Beraun, L. E. Grimes, and D. Y. Tzou, “Modeling of femtosecond laser-induced non-equibrium deformation in metal films,” International Journal of Solids and Structures, 2002, 39(12): 3199–3216.
W. P. Leemans, B. Nagler, A. J. Gonsalves, C. Toth, K. Nakamura, C. G. R. Geddes, et al., “GeV electron beams from a centimetre-scale accelerator,” Nature Physics, 2006, 2(10): 696–699.
S. V. Garnov, V. V. Bukin, A. A. Malyutin, and V. V. Strelkov, “Ultra fast space time and spectrum time resolved diagnostics of multicharged femtosecond laser micro plasma,” in AIP Conference Proceedings, Hawaii, vol. 1153, pp. 37–48, 2009.
H. Ditlbacher, J. R. Krenn, G. Schider, A. Leitner, and F. Aussenegg, “Two-dimensional optics with surface plasmon polaritons,” Applied Physics Letters, 2002, 81(10): 1762–1764.
D. Zhong and X. Tong. “Application research on hydraulic coke cutting monitoring system based on optical fiber sensing technology,” Photonic Sensors, 2014, 4(2): 147–151
A. Y. Basharin, V. S. Dozhdikov, V. T. Dubinchuk, A. V. Kirillin, I. Y. Lysenko, and M. A. Turchaninov, “Phases formed during rapid quenching of liquid carbon,” Technical Physics Letters, 2009, 35(5): 428–431.
J. Chen, G. Conache, M. Pistol, S. Gray, M. T. Borgström, H. Xu, et al., “Probing strain in bent semiconductor nanowires with Raman spectroscopy,” Nano Letters, 2010, 10(10): 1280–1286.
X. L. Tong, D. S. Jiang, W. B. Hu, Z. M. Liu, and M. Z. Luo, “The comparison between CdS thin films grown on Si (111) substrate and quartz substrate by femtosecond pulsed laser deposition,” Applied Physics A, 2006, 84(1–2): 143–148.
M. Beresna, P. G. Kazansky, Y. Svirko, M. Barkauskas, and R. Danielius, “High average power second harmonic generation in air,” Applied Physics Letters, 2009, 95(12): 121502-1–121502-3.
T. Maede, E. Ohmura, and I. Miyamoto, “Analysis of key hole behavior in laser welding,” in Proceeding of 6th International Symposium of Japan Welding Society, Nagoya, pp. 104–105, 1998.
M. Nikoufard, M. K. Alamouti, and A. Adel, “Ultra-compact photonic crystal based water temperature-sensor,” Photonic Sensors, 2016, 6(3): 274–278.
Acknowledgments
The authors gratefully acknowledge the financial support for this work provided by the Dr. Start-up Fund of Hubei University of Science and Technology under Grant No. BK1524 and the Science Research Project in Hubei Province Department of Education under Grant No. B2015077, the National Natural Science Foundation of China (NSFC) under Grant No. 61575148, the Colleges and Universities of Hubei Province Innovation and Entrepreneurship Training Plan under Grant No. 201510927017, No. 201510927018, and the Teaching Reform Program of Hubei University of Science and Technology under Grant No. 2015-XA-007.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/ licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Zhong, D., Li, Z. Material measurement method based on femtosecond laser plasma shock wave. Photonic Sens 7, 1–10 (2017). https://doi.org/10.1007/s13320-016-0340-x
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13320-016-0340-x