Article PDF
Avoid common mistakes on your manuscript.
Reference
Gupta M K, Sood P K, Sharma V S. Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques. J Cleaner Production 135: 1276–1288 (2016)
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found at https://doi.org/10.1007/s40544-017-0141-2
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, duplication, adaptation, distribution, and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provided a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Gupta, M.K., Sood, P.K. Erratum to: Surface roughness measurements in NFMQL assisted turning of titanium alloys: An optimization approach. Friction 11, 838 (2023). https://doi.org/10.1007/s40544-022-0721-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40544-022-0721-7