Abstract
The aim of the process preparation in the sense of a subsequent implementation is a precise description of the process with a description of the process strategy and process logic. The preparation includes the activity bundles on the left side of the open cycle, i.e., analysis, modeling, validation and optimization (see figure below). The result of these activity bundles is a process description that is sufficiently precise for implementation. The preparation is split into the activities analysis combined with modeling, validation, and optimization. These activities are not carried out in a strict order, but rather the respective priorities can change frequently between activities. Figure 6.1 shows these various activities and their relationships
Chapter PDF
References
Seel, N. M. (2003). Model-centered learning and instruction. Technology, Instruction, Cognition and Learning, 1(1), 59–85.
Allee, V. (2003). The future of knowledge. Increasing prosperity through value networks. Amsterdam: Butterworth-Heinemann.
Senge, P. (2008). The necessary revolution: How individuals and organisations are working together to create a sustainable world. Management Today, 24(10), 54–57.
Fleischmann, A., & Stary, C. (2012). Whom to talk to? A stakeholder perspective on business process development. Universal Access in the Information Society, 11(2), 125–150.
Augl, M., & Stary, C. (2015). Communication-and value-based organizational development at the university clinic for radiotherapy-radiation oncology. In S-BPM in the Wild (pp. 35–53). Springer International Publishing.
Augl, M., & Stary, C. (2017). Stakeholders as mindful designers: Adjusting capabilities rather than needs in computer-supported daily workforce planning. In Designing healthcare that works (pp. 95–112). Elsevier.
Fleischmann, A., Schmidt, W., Stary, C., & Augl, M. (2013). Agile process management through subject orientation. HMD Practice of Business Informatics, 50(2), 64–76.
Giaglis, G. M. (2001). A taxonomy of business process modeling and information systems modeling techniques. International Journal of Flexible Manufacturing Systems, 13(2), 209–228.
Lin, F. R., Yang, M. C., & Pai, Y. H. (2002). A generic structure for business process modeling. Business Process Management Journal, 8(1), 19–41.
Pinggera, J., Soffer, P., Fahland, D., Weidlich, M., Zugal, S., Weber, B., et al. (2015). Styles in business process modeling: an exploration and a model. Software & Systems Modeling, 14(3), 1055–1080.
Recker, J., Rosemann, M., Indulska, M., & Green, P. (2009). Business process modeling-a comparative analysis. Journal of the Association for Information Systems, 10(4), 1.
Zur Muehlen, M., & Recker, J. (2013). How much language is enough? Theoretical and practical use of the business process modeling notation. In Seminal contributions to information systems engineering (pp. 429–443). Berlin: Springer.
Stary, C. (2014). Non-disruptive knowledge and business processing in knowledge life cycles–aligning value network analysis to process management. Journal of Knowledge Management, 18(4), 651–686.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
Copyright information
© 2020 The Author(s)
About this chapter
Cite this chapter
Fleischmann, A., Oppl, S., Schmidt, W., Stary, C. (2020). Preparation of Process Implementation. In: Contextual Process Digitalization. Springer, Cham. https://doi.org/10.1007/978-3-030-38300-8_6
Download citation
DOI: https://doi.org/10.1007/978-3-030-38300-8_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-38299-5
Online ISBN: 978-3-030-38300-8
eBook Packages: Computer ScienceComputer Science (R0)