Abstract
Numerical simulations for blood flows related to cardiovascular diseases are presented. Differences in vessel morphologies produce different flow characteristics, stress distributions, and ultimately different outcomes. Some examples illustrating the effects of curvature and torsion on blood flows are presented both for simplified and patient-specific simulations. The goal of this study is to understand relationships between geometrical characteristics of blood vessels and blood flow behaviors.
You have full access to this open access chapter, Download conference paper PDF
Similar content being viewed by others
1 Introduction
In aging societies, cardiovascular conditions such as aortic aneurysms and aortic dissections persist as life-threatening diseases. Moreover, congenital diseases such as hypoplastic left heart syndrome constitute an important issue for our society. In recent years, patient-specific simulations have become common in the biomedical engineering field. Several mathematical viewpoints are expected to be added and to play important roles in this context. For instance, geometrical characterization of blood vessels, which vary widely among individuals, provides useful information to medical sciences. Differences in blood vessel morphology give rise to different flow characteristics, which cause different stress distributions and outcomes. Therefore, characterization of these vessels’ respective morphologies represents an important clinical question. Our objective in this study is to understand possible mechanisms connecting geometrical characteristics and stress distributions through flow behaviors. The studies presented in this paper are parts of a CREST [1] framework supported by the Japan Science and Technology Agency in a strategic area for promoting collaboration between mathematical science and other scientific fields.
2 Numerical Methods and Results
2.1 Governing Equations
We adopted incompressible Navier–Stokes equations as governing equations.
In those equations, \(t, u_i \, (i=1,2,3),\, p,\, \rho ,\) and \(\nu \) respectively represent time, velocity, pressure, density, and the kinematic viscosity of blood. We assumed that blood can be regarded as a Newtonian fluid in large arteries. Several numerical results with different numerical methods are presented in the following subsections. Finite difference method is used in Sect. 2.2, applied for blood flows in a thoracic aorta and for flows in simple spiral tubes to examine torsion effects. Then, finite element method is applied in Sect. 2.3 where fluid structure interaction (FSI) is considered and some flow mechanisms in a configuration after Norwood surgery are examined.
2.2 Finite Difference Approximation
2.2.1 Visualization of Flows in a Thoracic Aorta
Effects of curvature on flows in curved tubes have been discussed extensively in earlier studies [2,3,4]. When a tube has curvature, centrifugal force acts in the opposite direction, depending on the axial component of the velocity. Subsequently, secondary flow occurs on the cross-section and forms a set of twin vortices called Dean’s vortices, thereby playing an important role in blood flow through the aortic arch where a strong curvature exists.
Figure 1 presents streamlines that can be visualized based on numerical results obtained through an earlier study [5]. We assumed a blood vessel as a rigid body and applied finite-difference method on a centerline-fitted curvilinear coordinate system, where the centerlines and cross-sections were extracted from patient-specific CT scans of patients with aortic aneurysms. Incompressible Navier–Stokes equations were solved numerically with a boundary condition for the inflow velocity profile given by a phase-contrast MRI measurement.
Figure 1a presents streamlines through the whole thoracic aorta at peak systolic phase. Circulation in the aneurysm is apparent. Figure 1b shows the Dean’s vortices on the aortic arch superimposed to the main axial flow. In Fig. 1c, a spiral flow is apparent in the descending aorta.
Helicity, \(\boldsymbol{u}\cdot \left( \nabla \times \boldsymbol{u}\right) \), represents swirling flow regions of opposite signs. Figure 2a depicts helicity isosurfaces of a positive and a negative values, which shows Dean’s vortices generated at the aortic arch and subsequently flowing down to the descending aorta. In Fig. 2b, an isosurface of the second largest eigenvalue \(\lambda _2\) of \(S^2 + \Omega ^2\), where S and \(\Omega \) respectively represent symmetric and antisymmetric parts of the velocity gradient tensor, also shows a swirling flow region [6]. Enstrophy, \(\left| \nabla \times \boldsymbol{u}\right| ^2\), exhibits the strength of vorticity in Fig. 2c. In Fig. 2b, c, colors of isosurfaces show \(\lambda _2\) values.
2.2.2 Effects of Torsion in Simple Spiral Tubes
We also examined the effects of torsion using a pulsating flow in simple spiral tubes, as shown in [5]. Torsion of a three-dimensional curve is defined through the Frenet–Serret formula shown below.
Therein, \(\chi \) and \(\tau \) respectively represent curvature and torsion, where \(\boldsymbol{t}\), \(\boldsymbol{n}\), and \(\boldsymbol{b}\) respectively denote the tangential, normal, and bi-normal vectors.
Figures 3 and 4 portray secondary flows, which are obtainable by subtracting the main axial flow from the total flow velocities at peak systolic, late systolic, and late diastolic phases, respectively, for zero-torsion and nonzero-torsion cases. When the torsion is zero, the secondary flow is invariably symmetric. However, when the torsion is not zero, merging phenomena occur; one large vortex persists in a diastolic phase. Such difference brings about differences in torque exerted on vessel walls.
2.3 Finite Element Approximation
2.3.1 Torsion Effects on Flows in the Thoracic Aorta
Next we consider fluid–structure interaction (FSI) to examine torsion effects using patient-specific morphologies [7]. Here, FSI analysis is handled with the Sequentially-Coupled Arterial FSI (SCAFSI) technique [8] because the class of an FSI problem here has temporally–periodic FSI dynamics. Fluid mechanics equations are solved using Space–Time Variational Multiscale (ST-VMS) method [9,10,11]. First, we carry out structural mechanics computation to assess arterial deformation under an observed blood pressure profile in a cardiac cycle. Then we apply fluid mechanics computation over a mesh that moves to follow the lumen as the artery deforms. These steps are iterated where the stress obtained in fluid mechanics computation is used for the next structural mechanics computation. To assess torsion effects, the torsion-free model geometry is generated by projecting the original centerline to its averaged plane of curvature, as presented in Fig. 5.
Figure 6 presents secondary flows. On the left-hand side (projected shape), symmetric Dean’s vortices are apparent, although they are not visible on the right-hand side (original shape), similarly to the simple spiral tubes in Fig. 4.
Next we compare the wall shear stresses (WSS) patterns corresponding to the projected and the original geometries to examine the influence of torsion. Figure 7 presents WSS at peak systolic phase. In the projected torsion-free shape, a high WSS region is apparent at the aortic arch, which results from the strong Dean’s twin vortices, although it is not apparent in the original shape with torsion there.
2.3.2 Flow Mechanism in Morphology After Norwood Surgery
This subsection presents examples of patient-specific blood flow simulations at an anastomosis site after Norwood surgery for hypoplastic left heart syndrome. Our target is the geometry surrounding an anastomosis site of the aortic arch and pulmonary artery after Norwood surgery, which is one step taken during surgeries for hypoplastic left heart syndrome. The target geometry was extracted from a CT scan with boundary conditions obtained from ultrasound measurements. Here, we again adopt the rigid body assumption, i.e., not considering fluid–structure interactions. The SUPG/PSPG stabilized finite element formulation is used, which is solved on P1/P1 elements.
Figure 8a portrays instantaneous streamlines at the peak systolic phase, whereas Fig. 8b depicts the energy-dissipation distribution. Energy dissipation is a clinically important quantity because it imposes a load on the heart directly [12]. In Fig. 8b, high energy dissipation is apparent at the anastomosis site, which can be understood straightforwardly because the velocity is extremely high there. Although high energy dissipation is also apparent in the descending aorta, it cannot be qualified straightforwardly. This dissipation apparently derives from spiral flow there, which is generated at the aortic arch immediately after blood passes out of the thin anastomosis channel, as shown in Fig. 9. Here, a relation can be found between morphology and energy dissipation patterns through flow structures.
3 Conclusions
We have presented some relations between geometrical characteristics of blood vessels and flow behaviors. Those relations are expected to explain how and why vessel morphologies affect WSS distributions and energy dissipations. As described in Sect. 2.2, vessel curvature induces Dean’s vortices as a secondary flow by centrifugal force, thereby creating strong WSS there. Moreover, Dean’s vortices show different behaviors depending on the existence of torsion. In the example from a Norwood surgery morphology, an energy dissipation pattern on the descending aorta can be explained through flow structures. As a next step, predictions based on geometrical characteristics of blood vessels are expected to contribute to better risk assessments and surgery planning through mathematical modellings and numerical simulations.
References
Japan Science and Technology Agency website: https://www.jst.go.jp/kisoken/crest/en/
Germano, M.: On the effect of torsion on a helical pipe flow. J. Fluid Mech. 125, 1–8 (1982)
Berger, S.A., Talbot, L., Yao, L.-S.: Flow in curved pipes. Ann. Rev. Fluid Mech. 15, 461–512 (1983)
Lee, K.E., Parker, K.H., Caro, C.G., Sherwin, S.J.: The spectral/HP element modeling of steady flow in non-planar double bends. Int. J. Num. Meth. Fluids 57, 519–529 (2008)
Suito, H., Ueda, T., Sze, D.: Numerical simulation of blood flow in the thoracic aorta using a centerline-fitted finite difference approach. Jap. J. Ind. Appl. Math. 30(3), 701–710 (2013)
Jeong, J., Hussain, F.: On the identification of a vortex. J. Fluid Mech. 285, 69–94 (1995)
Suito, H., Takizawa, K., Huynh, V.Q.H., Sze, D., Ueda, T.: FSI analysis of the blood flow and geometrical characteristics in the thoracic aorta. Comput. Mech. 54(4), 1035–1045 (2014)
Tezduyar, T.E., Takizawa, K., Moorman, C., Wright, S., Christopher, J.: Multiscale sequentially-coupled arterial FSI technique. Comput. Mech. 46, 17–29 (2010)
Takizawa, K., Tezduyar, T.E.: Multiscale space-time fluid-structure interaction techniques. Comput. Mech. 48, 247–267 (2011)
Takizawa, K., Tezduyar, T.E., Buscher, A., Asada, S.: Space-time interface-tracking with topology change (ST-TC). Comput. Mech. 54(4), 955–971 (2014)
Takizawa, K., Tezduyar, T.E., Busche, A.: r and S. Asada, space-time fluid mechanics computation of heart valve models. Comput. Mech. 54(4), 973–986 (2014)
Ueda, T., Suito, H., Ota, H., Takase, K.: Computational fluid dynamics modeling in aortic diseases. Cardiovasc. Imag. Asia 2(2), 58–64 (2018)
Acknowledgements
This work was supported by JST CREST Grant Number JPMJCR15D1, Japan.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
Copyright information
© 2022 The Author(s)
About this paper
Cite this paper
Suito, H., Otera, K., Huynh, V.Q., Takizawa, K., Horio, N., Ueda, T. (2022). Numerical Study for Blood Flows in Thoracic Aorta. In: Chacón Rebollo, T., Donat, R., Higueras, I. (eds) Recent Advances in Industrial and Applied Mathematics. SEMA SIMAI Springer Series(), vol 1. Springer, Cham. https://doi.org/10.1007/978-3-030-86236-7_11
Download citation
DOI: https://doi.org/10.1007/978-3-030-86236-7_11
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-86235-0
Online ISBN: 978-3-030-86236-7
eBook Packages: Mathematics and StatisticsMathematics and Statistics (R0)