You have full access to this open access chapter, Download chapter PDF
Similar content being viewed by others
Correction to: Chapter 5 in: D. Godec et al. (eds.), A Guide to Additive Manufacturing, Springer Tracts in Additive Manufacturing, https://doi.org/10.1007/978-3-031-05863-9_5
In the original version of the book, the co-author name “Bernardo Vicente Morell” was mistakenly omitted and has now been inserted in the Chapter “General Process Simulations”. The chapter and book have been updated with the changes.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
Copyright information
© 2022 The Author(s)
About this chapter
Cite this chapter
Nordin, A. et al. (2022). Correction to: General Process Simulations. In: Godec, D., Gonzalez-Gutierrez, J., Nordin, A., Pei, E., Ureña Alcázar, J. (eds) A Guide to Additive Manufacturing. Springer Tracts in Additive Manufacturing. Springer, Cham. https://doi.org/10.1007/978-3-031-05863-9_9
Download citation
DOI: https://doi.org/10.1007/978-3-031-05863-9_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-05862-2
Online ISBN: 978-3-031-05863-9
eBook Packages: EngineeringEngineering (R0)