Abstract
In transferring the beam from one accelerator to another, preservation of the beam properties is essential. Injection should be accomplished with minimum beam loss and often minimal emittance dilution. Single-turn injection, in which a single bunch of particles is injected into a single empty rf bucket, is usually straightforward. In many cases, however, to attain higher bunch currents, one may also wish to accumulate beam in a storage ring by reinjecting different beam pulses into the same rf bucket. This is called multi-turn injection. In addition to conventional schemes, there are several new or more exotic injection techniques, devised to control and improve the properties of the stored beam.
Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
G.H. Rees: Injection. In: Proc. CERN Accelerator School, Gif-sur-Yvette, Paris, France, CERN 85–19, 1985 p. 331
G.H. Rees: ‘Extraction’. In: Proc. CERN Accelerator School, Gif-sur-Yvette, Paris, France, CERN 85–19, 1985 p. 346 (1985)
A. Piwinski: IEEE Tr. NS-24(3), 1364 (1977)
C. Gonzales, M. Morvillo, M. D’yachkov: Impedance Measurements on the LHC Dump Kicker Prototype. LHC Project Note 151 (1998)
M. Minty, R.H. Siemann: Nucl. Instr. Meth. A 376, 301 (1996)
The PEP-II Design Group: PEP-II An Asymmetric B Factory. SLAC-418 (1993)
Ch. Carli, S. Maury, D. Möhl: Combined Longitudinal and Transverse Multiturn Injection in a Heavy Ion Accumulator. In: Proc. of 1997 IEEE PAC, Vancouver, 1997 ( IEEE, Piscataway 1997 )
P. Baudrenghien, P. Collier: Double Batch Injection into LEP. In: Proc. of EPAC 96, Sitges, 1996 ( IOP, Bristol 1996 ) p. 415
E. Gianfelice, H. Schönauer: Strategies for Longitudinal Painting in the EHF Booster at Injection. In: Proc. of EPAC 1988, Rome, 1988 (IOP, 1989 )
G.H. Rees: Injection and Painting. In: Proc. of the Summer Study on High Energy Physics in the 1990s, Snowmass, 1988
G.I. Budker, G.I. Dimov. In: Proc. Int. Conf. on High-Energy Accelerators, Dubna 1963, Conf. 114, 1963, p. 1372
E. Crosbie, A. Gorka, E. Parker, C. Potts, L. Ratner: IEEE Tr. NS-22(3), 1056 (1975)
C.D. Moak: IEEE Tr. NS-23(2), 1126 (1976)
R.T. Free, J.S. Fraser, C.D.P. Levy: Laser Stripping of the Triumf H- Beam. In: Proc. of 1989 IEEE PAC, Chicago, 1989 ( IEEE, Piscataway 1989 ) p. 414
T.K. Khoe, R.J. Lari. In: Proc. Conf. on High-Energy Accelerators, Geneva, 1971, p. 98
J.T. Seeman: Injection Issues of Electron-Positron Storage Rings. In: Proc. of B factories: The State of the Art in Acclerators, Detectors and Physics, Stanford, April 6–10, 1992
M.G. Minty, R. Brown, F.-J. Decker et al.: ‘Using a Fast-Gated Camera for Measurements of Transverse Beam Distributions and Damping Times’. In: J.A. Hinkson, G. Stover (eds.): Proc. Accelerator Instrumentation Workshop, Berkeley AIP Conf. Proc. 281, 1992, p. 158
M.G. Minty, W.L. Spence: Injection Envelope Matching in Storage Rings. In: Proc. of 1995 IEEE PAC, Dallas, 1995 ( IEEE, Piscataway 1995 ) p. 536
M. Sands: A Beta Mismatch Parameter. SLAC internal report SLAC-AP-85 (1991)
T.O. Raubenheimer, L.Z. Rivkin, R.D. Ruth: Damping Ring Designs for a TeV Linear Collider. In: Proc. of the DFP Summer Study Snowmass’88, 1988
The NLC Design Group: Zeroth Order Design Report for the Next Linear Collider. SLAC-Report 474 (1996)
F. Hinode, S. Kawabata, H. Matsumoto et al.: Accelerator Test Facility—Design and Study Report. KEK Internal Report 95–4 (1995)
F. Bulos: Detailed Design of PEP II Injection Kickers. SLAC PEP-II/AP Note 5–92 (1992)
B.I. Grishanov, F.V. Podgorny, J. Rümmler, V.D. Shiltsev: Nucl. Instr. Meth. A 396 (1997) 28 NIM A 396 (1997) p. 28
V.D. Shiltsev: Nucl. Instr. Meth. A 374 (1996) 137
A.I. Drozhdin, N.V. Mokhov, M. Harrison: Study of Beam Losses during Fast Extraction of 800 GeV Protons from the Tevatron. Fermilab Internal Report FN-418 (1985)
A. Drozhdin, N. Mokhov, C. Johnstone, W. Wan, A. Garren: Scraping Beam Halo in µ+µ- Colliders. In: Proc. of the 4th International Conference on Physics Potential and Development of Muon Colliders, San Francisco, 1997
G.E. Fischer: Iron Dominated Magnets. Lecture at the 1985 SLAC Summer Institute. SLAC-PUB-3726 (1985)
R. Cappi, M. Giovannozzi: Phys. Rev. Lett. 10, 104801–1 (2002)
R. Cappi, M. Giovannozzi: Adiabatic Capture of Charged Particles in Islands of Phase Space: A New Method for Multi-turn Extraction. In: Proc. EPAC 02, Paris, 2002 ( European Phys. Soc., Geneva 2002 ) 1250
G. Acquistapace, J.L. Baldy, A.E. Ball et al.: The CERN Neutrino Beam to Gran Sasso (NGS): Conceptual Technical Design, ed. by K. Elsener. CERN 98–02 (1998)
E. Keil: Beam Separation in a Very Large Lepton Collider. CERN-SL-Note2001–017 (AP)
The LEP2 Team: LEP Design Report — Vol. III: LEP2. CERN-AC/96–01 (LEP2) (1996)
A.A. Asseev, M.D. Bavishev, A.N. Vasilev et al.: Nucl. Instr. Meth. A 330, 39 (1993)
K. Elsener, G. Fidecaro, M. Gyr et al.: Nucl. Instr. Meth. B 119, 215 (1996)
K. Elsener, G. Fidecaro, M. Gyr et al.: ‘What did we Learn from the Extraction Experiments with Bent Crystals at the CERN SPS’. In: Proc. of EPAC 98, Stockholm, 1998 ( IOP, Bristol 1999 )
C.T. Murphy, R.A. Carrigan, D. Chen et al.: Nucl. Instr. Meth. B 119, 231 (1996)
S. Pape Moller: Crystal Channeling or How to Build a ‘1000 TESLA Magnet’. Ninth John Adams Memorial Lecture. CERN 94–05 (1994)
Author information
Authors and Affiliations
Rights and permissions
Open Access This chapter was originally published with exclusive rights reserved by the Publisher in 2003 and was licensed as an open access publication in November 2019 under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license if changes were made.
The images or other third party material in this chapter may be included in the chapter’s Creative Commons license, unless indicated otherwise in a credit line to the material or in the Correction Note appended to the chapter. For details on rights and licenses please read the Correction https://doi.org/10.1007/978-3-662-08581-3_13. If material is not included in the chapter’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
Copyright information
© 2003 The Author(s)
About this chapter
Cite this chapter
Minty, M.G., Zimmermann, F. (2003). Injection and Extraction. In: Measurement and Control of Charged Particle Beams. Particle Acceleration and Detection. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-08581-3_9
Download citation
DOI: https://doi.org/10.1007/978-3-662-08581-3_9
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-07914-6
Online ISBN: 978-3-662-08581-3
eBook Packages: Springer Book Archive