Abstract
In this chapter, we reveal that edge states are not necessarily limited to wave systems but can also exist in convection-diffusion systems that are essentially different from wave systems. For this purpose, we study heat transfer in a graphene-like (or honeycomb) lattice to demonstrate thermal edge states with robustness against defects and disorders. Convection is compared to electron cyclotron, which breaks space-reversal symmetry and determines the direction of thermal edge propagation. Diffusion leads to interference-like behavior between opposite convections, preventing bulk temperature propagation. We also display thermal unidirectional interface states between two lattices with opposite convection. These results extend the physics of edge states beyond wave systems.
You have full access to this open access chapter, Download chapter PDF
Keywords
1 Opening Remarks
Topological insulators were initially revealed in quantum mechanics systems [1, 2], which are insulated in bulk but conductive on the surface. Since the foundation of quantum physics is Schrödinger wave mechanics, there is a similarity between quantum waves and classical waves in equation forms. Therefore, the concept of topological insulators has also been extended to classical wave systems [3], including but not limited to electromagnetics [4,5,6,7,8,9,10,11] and acoustics [12,13,14,15,16,17,18,19,20,21]. The related research was commonly conducted in nonreciprocal systems with the broken time-reversal symmetry induced by an external magnetic bias for electromagnetics [4,5,6] or an external momentum bias for acoustics [12,13,14,15,16]. Regardless of the quantum or classical description, topological insulators can support edge states on the surface, with broad applications for isolators and sensors.
Although edge states have been intensively studied in wave systems, they have received almost no attention in diffusion systems. Unlike wave systems with time-reversal symmetry, diffusion systems feature space-reversal symmetry, indicating that diffusion is identical in two opposite directions. Inspired by topological wave insulators [3] with the broken time-reversal symmetry, it is natural to consider the broken space-reversal symmetry of diffusion systems. Fortunately, several methods are available to break space-reversal symmetry, such as applying asymmetric structures and nonlinear materials [22,23,24,25] and considering spatiotemporal modulations [26,27,28,29]. Besides symmetry differences, diffusion systems also lack the concept of phase because diffusion generally occurs from high to low potentials, such as from high to low temperatures for heat transfer and from high to low concentrations for mass transfer. To solve the problem, we can introduce a periodic temperature [30,31,32,33,34,35,36] for heat transfer or a periodic concentration [37] for mass transfer, which has been experimentally validated [30, 31]. We can discuss thermal edge states with these preliminary analyses by considering heat transfer with conduction and convection for breaking space-reversal symmetry.
2 Theoretical Foundation
Two basic structures with counterclockwise and clockwise convection are presented in Fig. 22.1a, b, respectively. Convection is an analog of electron cyclotron, which determines the direction of thermal edge propagation, thus called thermal spin. We regard counterclockwise convection as spin-up and clockwise convection as spin-down for brevity. The vertex regions in Fig. 22.1 are solid pumps with high thermal conductivities to drive fluids with a convective velocity of v. Besides fluids, convection can also be effectively realized with spatiotemporal modulations of thermal conductivity and density [26,27,28,29], which has been experimentally verified to break space-reversal symmetry [28]. Therefore, what we discuss is a simple and practical system of heat transfer whose governing equation is [39]
where \(\rho \), C, \(\kappa \), and \({\boldsymbol{v}}\) denote density, heat capacity, thermal conductivity, and convective velocity, respectively. T and t represent temperature and time, respectively. \(\rho C{\boldsymbol{v}}\) is the convective term that breaks space-reversal symmetry.
We then need to introduce the concept of phase. For this purpose, we consider a periodic temperature source whose temperature is
where A, \(\omega \), and B are the temperature amplitude, circular frequency, and reference temperature of the temperature source. The real part of Eq. (22.2) denotes the actual temperature. The temperature source can generate a temperature profile with spatiotemporal periodicity,
with wave vector \({\boldsymbol{\alpha }}\) and position vector \({\boldsymbol{r}}\).
To understand the broken space-reversal symmetry induced by convection, we discuss a one-dimensional case along the x axis. Since conduction has dissipation, the wave vector should be a complex number, i.e., \(\alpha =\beta +\textrm{i}\gamma \) with wave number \(\beta \) and decay rate \(\gamma \). The substitution of Eq. (22.3) into Eq. (22.1) yields
with definitions of \(\varepsilon =\sqrt{-v^2/D^2+\sqrt{v^4/D^4+16\omega ^2/D^2}}\) and \(D=\kappa /\left( \rho C\right) \). When \(v=0\), it is identical along two opposite directions. If \(v\ne 0\), a change from v to \(-v\) yields the same \(\varepsilon \) and \(\beta \) but different \(\gamma \), indicating different decay rates along two opposite directions. Therefore, nonreciprocal temperature propagation can be achieved with convection, which offers an opportunity to realize one-way temperature propagation. Generally speaking, two parameters mainly affect temperature propagation: thermal diffusivity determines the decay rate; and convective velocity determines the temperature propagation speed. The chosen parameters are based on water that has a relatively small thermal diffusivity, so dissipation is not that intense and the expected phenomena can still be observed.
3 Finite-Element Simulation
We then design a graphene-like (or honeycomb) lattice composed of spin-up units, as presented in Fig. 22.2a. We first discuss the bulk property and put a temperature source in the center (Fig. 22.2a). Each side contains opposite convection in bulk, so temperature propagation decays far more quickly, as described by Eq. (22.4b). Therefore, the bulk cannot support temperature propagation and becomes insulated (Fig. 22.2b). We then discuss the surface property and put a temperature source at the bottom left corner (Fig. 22.2c). Each side contains only unidirectional convection on the surface, so the decay rate is far lower than the bulk. Since the graphene-like lattice is composed of spin-up units, the surface can support only counterclockwise temperature propagation (Fig. 22.2d), which is direct evidence of thermal edge states. Unlike the edge states in wave systems, those in convection-diffusion systems have diffusion-induced dissipation. A simple physical image to understand thermal edge states is that the surface decay rate is far lower than the bulk decay rate, so temperature propagation is allowed only on the surface. To confirm that thermal edge states have directionality, we further construct a graphene-like lattice with spin-down units (Fig. 22.2e). The simulation shows that thermal edge propagation still exists but with a clockwise direction (Fig. 22.2f). The results in Fig. 22.2 are in accordance with electron edge states whose propagation directions are determined by electron spins. Therefore, it is reasonable to compare convection to electron spin despite different mechanisms. In other words, the directions of thermal edge states are locked by thermal spins (i.e., convective directions).
Since edge states are unidirectional, defects and disorders cannot cause backscattering. Analogously, thermal edge states should also be robust against defects and disorders. We perform extended simulations based on the graphene-like lattice to confirm this robustness. We first change one unit from spin-up to spin-down (Fig. 22.3a). The result indicates that the thermal edge state still exists (Fig. 22.3b), but it has a slightly higher decay rate than Fig. 22.2d. We then stop one unit from rotating (Fig. 22.3c), and the result is presented in Fig. 22.3d, demonstrating that the thermal edge state remains unchanged. We finally remove six units from the graphene-like lattice, as displayed in Fig. 22.3e. Temperature propagation is still allowed only on the surface (Fig. 22.3f). Therefore, the results in Fig. 22.3 prove that thermal edge states are robust against defects and disorders. Moreover, since thermal edge states are robust, the graphene-like lattice is not mandatory, and other lattices are also applicable, such as a square lattice.
We further discuss thermal interface states. In quantum mechanics and classical wave systems, the interface between two materials with different topological phases can support topological interface states. Therefore, similar properties should also apply to convection-diffusion systems. To reveal thermal interface states, we combine two graphene-like lattices composed of spin-up and spin-down units (Fig. 22.4a, c). Since two lattices have different spin directions, unique sides exist at their interface with the same convective directions. Therefore, the decay rate at the interface is the smallest, which can support temperature propagation (Fig. 22.4b). We also prove the unidirectionality of temperature propagation by putting the temperature source at the output of Fig. 22.4b, and temperature propagation is forbidden (Fig. 22.4d). Therefore, thermal interface states exist between two lattices with different spin directions. The results in Fig. 22.4 also agree well with the understanding of electron interface states that the interface of two materials with different topological phases is conductive. The simulations in Figs. 22.2, 22.3 and 22.4 prove that the edge states in convection-diffusion systems have properties similar to wave systems.
We finally discuss the transition of thermal edge states. For this purpose, we change two parameters of the graphene-like lattice, i.e., the thermal conductivity of the fluid and the circular frequency of the temperature source (Fig. 22.5a). We first change the thermal conductivity of the fluid from 0.6 W m\(^{-1}\) K\(^{-1}\) (water) to 0.001 W m\(^{-1}\) K\(^{-1}\) and 400 W m\(^{-1}\) K\(^{-1}\), and the results are shown in Fig. 22.5b, c, respectively. Both cases become conductive in bulk, and thermal edge states no longer exist. The decay rate explains this phenomenon. When the thermal conductivity of the fluid is small (0.001 W m\(^{-1}\) K\(^{-1}\)), the heat exchange between opposite convection is insufficient. Thus, the decay rate in bulk is similar to that on the surface, and temperature propagation is allowed both in bulk and on the surface. When the thermal conductivity of the fluid is large (400 W m\(^{-1}\) K\(^{-1}\)), the convective term becomes relatively weak and can be ignored. In this way, the broken space-reversal symmetry induced by convection is not obvious, so nonreciprocal propagation almost does not exist. Therefore, the graphene-like lattice supports edge states and bulk states. We further discuss the frequency of the temperature source. The periodicity in Fig. 22.5d–f is 5, 50, and 100 s, respectively. As predicted by Eq. (22.4b), a smaller \(\omega \) (i.e., a larger periodicity) yields a lower decay rate. Therefore, as \(\omega \) decreases, the thermal edge state has a larger penetration depth. When the periodicity reaches 100 s, the bulk is almost conductive (Fig. 22.5f). It can also be imagined that when the periodicity tends to infinity (\(\omega \rightarrow 0\)), the graphene-like lattice also supports bulk states, demonstrating the necessity to consider the role of phase (or periodicity).
4 Discussion
Thermal edge states are closely related to three factors. (I) Convection strength, which should be neither too weak nor too strong. If convection is too weak, the broken space-reversal symmetry is not apparent. If convection is too strong, conduction-induced heat exchange between opposite convection is insufficient. (II) Temperature frequency. The opposite convection can prevent temperature propagation due to the interference-like behavior of two temperature waves. If a near-zero temperature frequency is applied (tending to steady states without phase features), the interference-like behavior is not obvious, and bulk states can be supported. (III) System size. Since temperature amplitude features decay along the propagation direction, a large size causes a large decay. Therefore, we should carefully design the convection strength, temperature frequency, and system size. Meanwhile, thermal edge states are based on practical materials like water and copper, which can be experimentally realized in principle.
The edge states in convection-diffusion systems are also compared with those in wave systems, and these two edge states show similar properties. Therefore, the fundamental origin of thermal edge states might also be topology. However, it is not simple to calculate band structures or Chern numbers in convection-diffusion systems because there is no obvious correspondence between the diffusion equation and the Schrödinger equation. Recent interest in non-Hermitian topology [40,41,42,43,44] may provide some insights. A common approach to a non-Hermitian Hamiltonian is introducing gain and loss to the Hermitian Hamiltonian. In contrast, diffusion itself features loss, so our system of heat transfer is essentially non-Hermitian [30], which can also be confirmed by the spatial decay of temperature propagation in Figs. 22.2, 22.3, 22.4 and 22.5. For simplicity, further explorations on non-Hermitian thermal topology might focus on one-dimensional systems at first.
5 Conclusion
We reveal that robust one-way edge states can also exist in convection-diffusion systems. Convection breaks space-reversal symmetry and contributes to one-way temperature propagation. Convection can also be compared to electron cyclotron, which determines the direction of thermal edge propagation. We further confirm the robustness of thermal edge states against defects and disorders. Moreover, we identify thermal interface states between two lattices with different spin directions. These findings may also guide exploring topological properties with diffusive dynamics and open a new topological diffusion research field, especially topological thermotics.
6 Exercise and Solution
Exercise
-
1.
Derive Eq. (22.4).
Solution
-
1.
The substitution of Eq. (22.3) into Eq. (22.1) yields
$$\begin{aligned} -\textrm{i}\omega \rho C+\alpha ^2\kappa +\textrm{i}\alpha \rho C v=0. \end{aligned}$$(22.5)The wave number \(\alpha \) is a complex number, which can be written as \(\alpha =\beta +\textrm{i}\gamma \). Therefore, Eq. (22.5) can be rewritten as
$$\begin{aligned} -\textrm{i}\omega \rho C+\left( \beta +\textrm{i}\gamma \right) ^2\kappa +\textrm{i}\left( \beta +\textrm{i}\gamma \right) \rho C v=0. \end{aligned}$$(22.6)Then, Eq. (22.6) can be divided into two parts
$$\begin{aligned} \left( \beta ^2-\gamma ^2\right) \kappa -\gamma \rho C v&=0,\end{aligned}$$(22.7a)$$\begin{aligned} -\omega \rho C+2\beta \gamma \kappa +\beta \rho C v&=0. \end{aligned}$$(22.7b)Solving these two equations, we can derive Eq. (22.4).
References
Hasan, M.Z., Kane, C.L.: Colloquium: topological insulators. Rev. Mod. Phys. 82, 3045 (2010)
Qi, X.-L., Zhang, S.-C.: Topological insulators and superconductors. Rev. Mod. Phys. 83, 1057 (2011)
Zangeneh-Nejad, F., Alù, A., Fleury, R.: Topological wave insulators: a review. C. R. Phys. 21, 467 (2020)
Haldane, F.D.M., Raghu, S.: Possible realization of directional optical waveguides in photonic crystals with broken time-reversal symmetry. Phys. Rev. Lett. 100, 013904 (2008)
Wang, Z., Chong, Y.D., Joannopoulos, J.D.: and Marin Soljačić, Observation of unidirectional backscattering-immune topological electromagnetic states. Nature 461, 772 (2009)
Poo, Y., Wu, R.-X., Lin, Z.F., Yang, Y., Chan, C.T.: Experimental realization of self-guiding unidirectional electromagnetic edge states. Phys. Rev. Lett. 106, 093903 (2011)
Lu, L., Joannopoulos, J.D., Soljačić, M.: Topological photonics. Nat. Photonics 8, 821 (2014)
Christiansen, R.E., Wang, F.W., Sigmund, O.: Topological insulators by topology optimization. Phys. Rev. Lett. 122, 234502 (2019)
Ozawa, T., Price, H.M., Amo, A., Goldman, N., Hafezi, M., Lu, L., Rechtsman, M.C., Schuster, D., Simon, J., Zilberberg, O., Carusotto, I.: Topological photonics. Rev. Mod. Phys. 91, 015006 (2019)
Yang, Y.H., Gao, Z., Xue, H.R., Zhang, L., He, M.J., Yang, Z.J., Singh, R., Chong, Y.D., Zhang, B.L., Chen, H.S.: Realization of a three-dimensional photonic topological insulator. Nature 565, 622 (2019)
Hu, G.W., Ou, Q.D., Si, G.Y., Wu, Y.J., Wu, J., Dai, Z.G., Krasnok, A., Mazor, Y., Zhang, Q., Bao, Q.L., Qiu, C.-W., Alù, A.: Topological polaritons and photonic magic angles in twisted \(\alpha \)-MoO\(_3\) bilayers. Nature 582, 209 (2020)
Khanikaev, A.B., Fleury, R., Mousavi, S.H., Alù, A.: Topologically robust sound propagation in an angular-momentum-biased graphene-like resonator lattice. Nat. Commun. 6, 8260 (2015)
Yang, Z.J., Gao, F., Shi, X.H., Lin, X., Gao, Z., Chong, Y.D., Zhang, B.L.: Topological acoustics. Phys. Rev. Lett. 114, 114301 (2015)
Ni, X., He, C., Sun, X.-C., Liu, X.-P., Lu, M.-H., Feng, L., Chen, Y.-F.: Topologically protected one-way edge mode in networks of acoustic resonators with circulating air flow. New J. Phys. 17, 053016 (2015)
Fleury, R., Khanikaev, A.B., Alù, A.: Floquet topological insulators for sound. Nat. Commun. 7, 11744 (2016)
Ding, Y.J., Peng, Y.G., Zhu, Y.F., Fan, X.D., Yang, J., Liang, B., Zhu, X.F., Wan, X.G., Chen, J.C.: Experimental demonstration of acoustic Chern insulators. Phys. Rev. Lett. 122, 014302 (2019)
Lu, J.Y., Qiu, C.Y., Ye, L.P., Fan, X.Y., Ke, M.Z., Zhang, F., Liu, Z.Y.: Observation of topological valley transport of sound in sonic crystals. Nat. Phys. 13, 369 (2017)
Wen, X.H., Qiu, C.Y., Qi, Y.J., Ye, L.P., Ke, M.Z., Zhang, F., Liu, Z.Y.: Acoustic Landau quantization and quantum Hall-like edge states. Nat. Phys. 15, 352 (2019)
Souslov, A., Dasbiswas, K., Fruchart, M., Vaikuntanathan, S., Vitelli, V.: Topological waves in fluids with odd viscosity. Phys. Rev. Lett. 122, 128001 (2019)
Fan, H.Y., Xia, B.Z., Tong, L., Zheng, S.J., Yu, D.J.: Elastic higher-order topological insulator with topologically protected corner states. Phys. Rev. Lett. 122, 204301 (2019)
Qi, Y.J., Qiu, C.Y., Xiao, M., He, H.L., Ke, M.Z., Liu, Z.Y.: Acoustic realization of quadrupole topological insulators. Phys. Rev. Lett. 124, 206601 (2020)
Li, B.W., Wang, L., Casati, G.: Thermal diode: Rectification of heat flux. Phys. Rev. Lett. 93, 184301 (2004)
Li, Y., Shen, X.Y., Wu, Z.H., Huang, J.Y., Chen, Y.X., Ni, Y.S., Huang, J.P.: Temperature-dependent transformation thermotics: from switchable thermal cloaks to macroscopic thermal diodes. Phys. Rev. Lett. 115, 195503 (2015)
Huang, S.Y., Zhang, J.W., Wang, M., Lan, W., Hu, R., Luo, X.B.: Macroscale thermal diode-like black box with high transient rectification ratio. ES Energy Environ. 6, 51 (2019)
Su, C., Xu, L.J., Huang, J.P.: Nonlinear thermal conductivities of core-shell metamaterials: rigorous theory and intelligent application. EPL 130, 34001 (2020)
Edwards, B., Engheta, N.: Asymmetrical diffusion through time-varying material parameters. In: Conference on Lasers and Electro-Optics JTu5A.34. Optical Society of America (2017)
Torrent, D., Poncelet, O., Batsale, J.-C.: Nonreciprocal thermal material by spatiotemporal modulation. Phys. Rev. Lett. 120, 125501 (2018)
Camacho, M., Edwards, B., Engheta, N.: Achieving asymmetry and trapping in diffusion with spatiotemporal metamaterials. Nat. Commun. 11, 3733 (2020)
Xu, L.J., Huang, J.P., Ouyang, X.P.: Tunable thermal wave nonreciprocity by spatiotemporal modulation. Phys. Rev. E 103, 032128 (2021)
Li, Y., Peng, Y.-G., Han, L., Miri, M.-A., Li, W., Xiao, M., Zhu, X.-F., Zhao, J.L., Alù, A., Fan, S.H., Qiu, C.-W.: Anti-parity-time symmetry in diffusive systems. Science 364, 170 (2019)
Xu, L.J., Wang, J., Dai, G.L., Yang, S., Yang, F.B., Wang, G., Huang, J.P.: Geometric phase, effective conductivity enhancement, and invisibility cloak in thermal convection-conduction. Int. J. Heat Mass Transf. 165, 120659 (2021)
Cao, P.C., Li, Y., Peng, Y.G., Qiu, C.W., Zhu, X.F.: High-order exceptional points in diffusive systems: robust APT symmetry against perturbation and phase oscillation at APT symmetry breaking. ES Energy Environ. 7, 48 (2020)
Xu, L.J., Huang, J.P.: Thermal convection-diffusion crystal for prohibition and modulation of wave-like temperature profiles. Appl. Phys. Lett. 117, 011905 (2020)
Xu, L.J., Huang, J.P.: Controlling thermal waves with transformation complex thermotics. Int. J. Heat Mass Transf. 159, 120133 (2020)
Xu, L.J., Huang, J.P.: Negative thermal transport in conduction and advection. Chin. Phys. Lett. 37, 080502 (2020)
Xu, L.J., Huang, J.P.: Active thermal wave cloak. Chin. Phys. Lett. 37, 120501 (2020)
Xu, L.J., Dai, G.L., Wang, G., Huang, J.P.: Geometric phase and bilayer cloak in macroscopic particle-diffusion systems. Phys. Rev. E 102, 032140 (2020)
Xu, L.J., Huang, J.P.: Robust one-way edge state in convection-diffusion systems. EPL 134, 60001 (2021)
Huang, J.P.: Theoretical Thermotics: Transformation Thermotics and Extended Theories for Thermal Metamaterials. Springer, Singapore (2020)
Parto, M., Wittek, S., Hodaei, H., Harari, G., Bandres, M.A., Ren, J.H., Rechtsman, M.C., Segev, M., Christodoulides, D.N., Khajavikhan, M.: Edge-mode lasing in 1D topological active arrays. Phys. Rev. Lett. 120, 113901 (2018)
Luo, X.-W., Zhang, C.W.: Higher-order topological corner states induced by gain and loss. Phys. Rev. Lett. 123, 073601 (2019)
Kawabata, K., Shiozaki, K., Ueda, M., Sato, M.: Symmetry and topology in non-Hermitian physics. Phys. Rev. X 9, 041015 (2019)
Okuma, N., Kawabata, K., Shiozaki, K., Sato, M.: Topological origin of non-Hermitian skin effects. Phys. Rev. Lett. 124, 086801 (2020)
Borgnia, D.S., Kruchkov, A.J., Slager, R.-J.: Non-Hermitian boundary modes and topology. Phys. Rev. Lett. 124, 056802 (2020)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
Copyright information
© 2023 The Author(s)
About this chapter
Cite this chapter
Xu, LJ., Huang, JP. (2023). Theory for Thermal Edge States: Graphene-Like Convective Lattice. In: Transformation Thermotics and Extended Theories. Springer, Singapore. https://doi.org/10.1007/978-981-19-5908-0_22
Download citation
DOI: https://doi.org/10.1007/978-981-19-5908-0_22
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-5907-3
Online ISBN: 978-981-19-5908-0
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)