Abstract
Thermal convection is one of the three basic heat transfer mechanisms, profoundly influencing the natural environment, social production, and daily life. However, the high complexity of governing equation, which describes the coupling of heat and mass transfer, makes it challenging to manipulate thermal convection at will in both theory and experiment. Here, we consider the heat transfer in Hele-Shaw cells, a widely-used model of Stokes flow between two parallel plates with a small gap, and apply the scattering-cancellation technology to construct convective thermal materials with bilayer structures and homogeneous isotropic materials. By tailoring thermal conductivity and viscosity, we demonstrate cloaking devices that can simultaneously hide obstacles from heat and fluid motion and verify their robustness under various thermal-convection environments by numerical simulations. Our results show that about 80% of the temperature and pressure disturbances in the background caused by obstacles can be eliminated by the cloak. The developed approach can be extended to control other convection-diffusion systems or multiphysics processes. The results pave a promising path for designing various metadevices such as concentrators or sensors.
You have full access to this open access chapter, Download chapter PDF
Keywords
1 Opening Remarks
Metamaterials [1] (and metadevices [2]), usually made of artificially-structured composites, have been a powerful tool to manipulate physical fields in many realms [1,2,3,4], and provide functions beyond naturally-occurring materials. One typical methodology to design metamaterials is the transformation optics [5] and its counterparts in other physical fields [3]. However, the requirement for inhomogeneous and anisotropic parameters makes it difficult to fabricate devices designed by transformation optics. To overcome this bottleneck, scattering-cancellation technology (SCT) has been developed and successfully used in electromagnetism [6] and other fields [7]. Generally speaking, SCT can realize a similar function to transformation optics, while it only needs bilayer or monolayer structures and homogeneous isotropic bulk materials. SCT is sometimes called ‘solving the equation directly’ sometimes. The main procedure of this method is inversely finding the coefficients (material parameters) of the equation according to the required solution with analytical techniques. One type of equation that SCT often deals with is the Laplacian-type equation, which is just a Laplace equation in a homogeneous isotropic medium. Laplacian-type equations can describe the magnetic scalar potential in static magnetic fields [8], the temperature or electrostatic potential in heat or electrical conduction [9,10,11,12,13,14], or the liquid pressure in a potential flow [15, 16]. Based on them, various bilayer or monolayer metamaterials have been realized in the mentioned scenarios and independent multiphysics [17,18,19,20].
However, although thermal convection is one of the primary modes of heat transfer and plays an essential role in nature and human society, effective techniques like SCT for manipulating it are still lacking. This dilemma may result from the complexity of its multiphysical governing equations. In detail, convective heat flux contains not only an advection term due to the movement of fluid medium but also a conductive term in the nonisothermal flow. Therefore, the governing equations consist of the conduction-advection heat equations, the law of continuity for fluid motion, and the Navier-Stokes equations, which make it challenging to apply transformation optics or SCT, especially the Navier-Stokes equation. As a result, although thermal metamaterials [21, 22] have been developed for more than a decade and show potential in practical applications such as thermal management of electronic devices, thermal camouflage imaging, and radiative cooling [23,24,25], the progress of metamaterials in thermal convection seems insufficient.
Current advances in convective thermal metamaterials mainly benefit from choosing an appropriate simplified model of the Navier-Stokes equations. For example, Darcy’s law describes the creeping flow or Stokes flow (Reynolds number Re \(\ll 1\)) in porous media [26]. By engineering the permeability of porous media, some fluid-flow metamaterials have been designed [27, 28], and this technique has been combined with the tailoring method of thermal conductivity to design convective thermal metamaterials [29,30,31,32,33]. In theory, convective thermal metamaterials can control heat flux and flow field simultaneously [29, 30]. However, due to the limited practical means to tailor the permeability, reports on experimentally realizing such fluid-flow or convective metamaterials are still scarce. More recently, another hydrodynamic model has been used to control fluid motion, i.e., the Stokes flow inside two parallel plates, and a series of experimental works have been reported [34,35,36,37]. The gap between two plates is much smaller than the characteristic length of the other two spatial dimensions, so the model is also called the Hele-Shaw flow or Hele-Shaw cell [38]. As an extension of the Poiseuille flow [39], the Hele-Shaw flow is quite a fundamental model in many fields like viscous fingering [40], microfluidics [41], parametric resonance [42], and flow-induced choking [43]. The fluid pressure in the Hele-Shaw cell also satisfies a Laplacian-type equation [44], and SCT has been employed to construct a monolayer fluid-flow cloak in the cell [15].
Here, we develop SCT to control thermal convection in a Hele-Shaw cell and employ it to seek suitable thermal conductivity and viscosity of artificial structures. By surrounding an area with two layers of homogeneous isotropic material, we can get the desired temperature and pressure distribution (and thus heat flow and velocity distribution) inside and outside these two layers. Unlike previous works on SCT, which dealt with single or decoupled fields, we investigate how to apply SCT to a set of coupled equations and simultaneously regulate multiphysical fields. As an application, we design a bilayer convective (thermo-hydrodynamic) cloak that can prevent obstacles from simultaneously disturbing the external thermal and flow fields. We show how the respective cloaking conditions of heat conduction and fluid motion are combined and successfully work together in thermal convection. Our design is further verified by numerical simulation under various convective environments, showing tough robustness.
2 Governing Equation
Given that heat transfers within a Hele-Shaw cell, in which the fluid demonstrates a creeping flow. The governing equations of this model contain the heat transfer equation [45]
the law of continuity for fluid motion
and the Hele-Shaw equation [44]
which is a simplification of the Navier-Stokes equation. Here, T is the temperature and \(\textbf{v}\) is the velocity of fluid motion. \(\kappa \), \(\rho \), \(C^P\) and \(\mu \) are the thermal conductivity, density, specific heat at constant pressure and the dynamic viscosity of the fluid, respectively. In addition, h is the depth of the Hele-Shaw cell and P is the fluid pressure. Strictly speaking, Eq. (6.3) gives the average velocity \(\textbf{v}(x,y)\) along the z-axis if the plates of cells are put on the x-y plane, so we can treat the three-dimensional (3D) model as a two-dimensional (2D) one. Applying the divergence operator on Eq. (6.3) and comparing it with Eq. (6.2), we can see
In a region where \(\rho ,\mu \) and h are all constants (or the ratio \({\rho h^2}/{\mu }\) keeps the same), Eq. (6.4) is just a Laplace’s equation, and thus the Hele-Shaw flow is a classical potential flow like the Darcy flow in the porous media. On the other hand, substituting Eq. (6.3) into Eq. (6.1) to eliminate the velocity term, the heat transfer equation can be written as
When the velocity is zero everywhere, Eq. (6.5) is also a Laplacian-type equation known as the Fourier’s law of heat conduction. As mentioned above, various bilayer metamaterials have been realized in pure heat conduction or potential flows. We aim to obtain the material parameters to realize similar functions as conduction under the convective environment.
3 Bilayer Scheme and Scattering-Cancellation Technology
Now we consider the case where both the thermal bias and the pressure bias are applied on the x direction (see the heat sources and pressures applied in Fig. 6.1; other boundary conditions will be discussed with simulation validation in Part C of the Supporting Information), and assume that
in the whole space. Moreover, by doing a variable substitution \(\varphi (\textbf{r})=f(\textbf{r})\frac{\rho C^P h^{2}}{12\mu \kappa }\), Eq. (6.5) can be rewritten as
If \(\varphi \) is a constant in each domain, we can write the heat transfer equation with a compact form as
where \(\Phi =T+\dfrac{1}{2}\varphi T^2\). This trick (similar to the Kirchhoff transformation in nonlinear heat conduction [47] which has been used in designing nonlinear thermal metamaterials [48]) makes the governing equation conform to the form of Laplace’s equation if \(\kappa \) is also a constant. In the framework of bilayer metamaterials, we use subscript 1, 2, 3, and b to represent the central functional area inside the device, the inner layer, the outer layer, and the background outside the device, respectively (see Fig. 6.1b). The radius from inside to outside (corresponding to core, inner and outer layers in Fig. 6.1a) is \(R_1\), \(R_2\) and \(R_3\).
SCT can be generalized as an inverse analytical calculation of possible material parameters in each region according to the desired physical field distribution in certain regions. However, whether we want to modulate temperature or pressure distribution in a thermal convection environment, these two variables (T and p) do not appear directly in the Laplace-like Eq. (6.8), but instead, another variable \(\Phi \) that is a key difference between coupled multiphysics and single physics. Fortunately, under certain conditions (see the derivation details in Part A of the Supporting Information), bilayer devices such as invisibility cloaks can be realized by simultaneously modulating thermal conductivity and viscosity. This cloak work in both thermal and hydromechanical fields. Below we will deduce the designing parameters of such a cloak.
4 Convective Cloak Condition
As generally defined in metamaterials, cloaking can realize invisibility [5]. It means the scattering signals from an obstacle can be eliminated by a specific device surrounding it (named Criterion I which requires \(T_b(\mathrm{\boldsymbol{r}};r>R_3)=T_\textrm{Ref}(\mathrm{\boldsymbol{r}};r>R_3)\) in heat transfer) and the flux cannot flow into the obstacle (named Criterion II which requires \(c=0\)). For Laplacian-type governing equations with diffusion nature, scattering signals mean distortion of potential (such as temperature, fluid pressure and electrostatic potential) distribution in the background. Since Eq. (6.8) and the Fourier’s law have the same form for \(\Phi \) and T, we can expect that the thermal conductivity for a thermal cloak in convection is also similar to its counterpart in conduction. Of course, as mentioned before, we need to note that the independent variables and boundary conditions of these two equations are different. Therefore, the physical meanings of the corresponding conclusions are not exactly the same, unless there is no advection. In heat conduction, the condition for Criterion I using the general anisotropic monolayer structure has already been solved out [49], and its version for the isotropic bilayer scheme is
where \(D_n\) \((n=1,2,3,4)\) is given by
In addition, previous works on preventing heat flux from entering into the cloak usually require that the inner layer is absolutely insulated, meaning that \(\kappa _2=0\) [9,10,11]. In this case, \(\kappa _1\) can take arbitrary real values, so the denominator in Eq. (6.9) must be zero, which can result in the familiar relationship [11]
We must emphasize that, by now, Eq. (6.11) can only be seen as the condition for shielding scattering signals of \(\Phi \) in thermal convection. Thermal conductivity engineering alone is not enough to achieve a cloak (for \(\Phi \)) in convection, as our assumption on f or \(\varphi \) requires a certain viscosity distribution. From the condition that \(\varphi \) is a constant (see Part A of the Supporting Information), we should have
It is interesting that Eq. (6.12) is exactly the condition for a bilayer fluid-flow cloak [15, 16].
So far, we actually make a cloak for the potential \(\Phi \) and pressure P. We should still verify the two criterions for T. First, from \(\Phi _b=\Phi _\textrm{Ref}\), \(P_b=P_\textrm{Ref}\) and the fact that the materials in reference and background are the same, we can obtain a differential equation for \(T_b-T_\textrm{Ref}\) as
In a homogeneous medium, \(\nabla P_\textrm{Ref}\) is a uniform field along the x axis, so there are two general solutions for Eq. (6.13), namely \(T_b-T_\textrm{Ref}\equiv 0\) and \(T_b-T_\textrm{Ref}\sim \exp \left( -\nabla _x P_b\dfrac{\rho _b C^P_{b} h^2_b}{12\mu _b \kappa _b}\right) \). Since \(T_b-T_\textrm{Ref}\) must vanish on the left and right boundaries, the only possible solution is the trivial one, so Criterion I is met. Similarly, it can be deduced from \(\nabla \Phi _1=0\) and \(\nabla P_1=0\) that \(\nabla T_1\) equals zero. In conclusion, by tailoring thermal conductivity and viscosity based on Eqs. (6.11) and (6.12), the aim objects can be hidden in heat and fluid fields simultaneously within the artificial structures.
In our derivation, we do not give the assumption of whether the obstacle is a solid object or not. Under ideal conditions, the obstacle (and the inner layer) cannot move, so this concern does not matter. A perfect cloak (\(\kappa _2=0\) and \(\mu _2=\infty \)) does not care about the material inside since the inner layer isolates internal and external interactions. An interesting argument is that if the material inside the cloak has an extremely low conductivity (\(\kappa _1\rightarrow 0\)) and high viscosity (\(\mu _1\rightarrow \infty \)), Criterion II is met. Otherwise, an imperfect inner layer (with small and positive \(\kappa _2\) and \(1/\mu _2\)) can be regarded as approximately insulated and immobile as long as
In particular, when the inner layer and the central area are occupied by the same material, the bilayer cloak degenerates to a monolayer cloak.
5 Finite-Element Simulation
Now we verify our theoretical design by numerical simulation with the help of commercial finite-element software Comsol Multiphysics. As depicted in Fig. 6.1, the depth of 2D cell model is an extra parameter in the creeping flow module. In fact, besides the law of continuity, the governing equation of the Hele-Shaw flow or shallow channel approximation in Comsol Multiphysics is \(\nabla p-\nabla \cdot \left( \mu \left( \nabla \textbf{v} +\nabla \textbf{v} ^{{\text {T}} }\right) \right) +\dfrac{12\mu }{h^2}\textbf{v}=0\). When \(h\rightarrow 0\), this equation is reduced to Eq. (6.4). An alternative method is using the mathematics module to establish and solve Eq. (6.4). For the background material, we use water as a reference and set \(\kappa _b=0.6\) W m\(^{-1}\) K\(^{-1}\), \(\mu _b=10^{-3}\) Pa s, \(\rho _b=1000\) kg m\(^{-3}\) and \(C^P_{b}=5000\) J kg\(^{-1}\) K\(^{-1}\). The depth of the cell is set as \(h=2\times 10^{-6}\) m, and the horizontal section (the x-y plane) is a square with side length equal to \(2\times 10^{-4}\) m. The radius of the central region, inner layer and outer layer are respectively \(R_1=0.25\times 10^{-4}\) m, \(R_2=0.4\times 10^{-4}\) m, and \(R_3=0.5\times 10^{-4}\) m. In addition, the depth of the cell, the specific heat, and the density are set the same everywhere for the uniform product \(\rho C^P h^2\). The applied temperature bias and pressure difference are 10 K and 500 Pa, respectively. The hot source (303.15 K) and the fluid inlet are set on the left boundary of the whole system, while the cold source (293.15 K) and the fluid outlet are both on the right side. We apply thermal insulation and non-slip conditions on the upper and bottom boundaries. If we do not consider the boundary layer, based on Eq. (6.3), the flow speed in the reference is \(8.3\times 10^{-3}\) \(\mathrm {m/s}\). Using \(2h_b\) as the characteristic linear dimension, the Reynolds number for the reference is \(1.7\times 10^{-4}\), which is consistent with the creeping flow hypothesis. In practice, we cannot achieve infinite thermal conductivity and zero viscosity for the cloak. Nevertheless, based on Eq. (6.14), we can set the inner layer approximately non-conductive and motionless with \(\kappa _2=6\times 10^{-4}\) W m\(^{-1}\) K\(^{-1}\) and \(\mu _2=100\) Pa s. The parameters of the outer layer are \(\kappa _3=2.73\) W m\(^{-1}\) K\(^{-1}\) and \(\mu _3=2.20\times 10^{-4}\) Pa s. Inside the convective cloak, we take \(\kappa _1=2.4\) W m\(^{-1}\) K\(^{-1}\) and \(\mu _1=0.01\) Pa s for the fluid material obstacle.
The simulation results of steady temperature and pressure performances are shown in Fig. 6.2a1–b3. Besides the cloak, ‘Reference’ represents the bare scenario with neither the cloak nor the obstacle, while ‘Without cloak’ scenario means putting only the obstacle into ‘Reference.’ According to isotherms and isobars, the temperature and pressure distributions of the convective cloak in the background are the same as the reference. The temperature and pressure inside the cloak are visually invariant in space. As a comparison, the obstacle distorts isotherms and isobars. In particular, for intuitive comparison, we detect the data from the line segment \(y=0\) (\(-10^{-4}\) m \(<x<10^{-4}\) m) in Fig. 6.2a1–b3 and plot them in c and d for the temperature and pressure, respectively. In both c and d, the blue dashed line (‘Cloak’) and black solid line (‘Reference’) match well in the background. Inside the cloak, the temperature and pressure patterns for the cloak show plateaus, which indicates the heat flux is almost zero, and the obstacle region approximately demonstrates no fluid flow. Further, we can define a ratio measuring the extent to which the disturbance of the external background by the obstacle is eliminated. The average absolute value of the temperature difference in the background area between the cloak and the reference is 0.016 K. Its counterpart between the reference and the case without a cloak is 0.095 K. So, \(82\%\) (\({\approx }1-0.016/0.095\)) of the temperature disturbance generated by the obstacle can be eliminated. The similar ratio for pressure can also be calculated as 77%. If we replace the fluid material obstacle with a solid one, the cloaking function for heat transfer and fluid flow still works well, although the fluid pressure inside the cloak is absent for a solid. Also, to make a perfect bilayer cloak with extreme parameters in numerical simulation, we can set the thermal insulation condition and the non-slip condition on the boundaries of the inner layer. However, we should notice the thermal and hydrodynamic fields in the central area (if fluids still occupy it) cannot be determined without giving extra information, although the background region would not be disturbed.
In Fig. 6.3, we show the heat flux density and velocity distributions for all the three convective devices and the reference. The advective heat flux density vector is defined as \(\rho C^P (T-T_\textrm{Amb})\textbf{v} \), where the ambient temperature \(T_\textrm{Amb}\) is 293.15 K. From a–d, it can be verified that the heat and mass fluxes are blocked in the inner layer and the obstacle, and the fluxes outside the bilayer structure are the same as the reference. In addition, we can find Reynolds number in the background for the cloak is \(\textrm{Re} \approx 2.07\times 10^{-3}\) if we use \(R_3\) as the characteristic scale. It’s known that the boundary layer can play an important role in thermal convection. Since the non-slip condition is applied on the upper and bottom boundaries (i.e., \(y=\pm 10^{-4}\) m), the velocity should be zero, so we plot the flux data taken from the line segment \(x=0\) (\(-10^{-4}\) m \(<y<10^{-4}\) m) in Fig. 6.3e and f. We can see the velocity increases or decreases sharply near \(x=-0.5\times 10^{-4}\) m or \(x=0.5\times 10^{-4}\) m in Fig. 6.3d, which corresponds to the laminar boundary layer. Also, the heat flux exhibits sharp changes near the boundary, but to a lesser extent than the change in velocity. This feature can be explained by the Péclet number Pe \(=\) Re\(\times \)Pr (Pr is the Prandtl number). For the reference, Pe \(\approx 0.7\), so the conductive heat transport and the advective one are comparable in magnitude. Then, the advective heat flux demonstrating an obvious boundary layer plus the relatively uniform conductive heat flow results in the patterns in Fig. 6.3f. The Prandtl number is fixed for the same fluid material, so the Reynolds number affects the boundary layer. At the same time, according to our previous work [30], a larger Reynolds number also leads to a change in the temperature distribution pattern the isotherm area is not uniform. So we observe the cloaking performance under different pressure differences in Part B of the Supporting Information and find our design works well.
We perform a three-dimensional (3D) simulation using the same material and structure parameters to mimic a more realistic working environment. Here, the shallow channel term \({12\mu }\textbf{v}/{h^2}\) added in the 2D Navier-Stokes equations is not needed. The inertia term is also included in the governing equations so we actually use the full 3D incompressible Navier-Stokes equations \(\nabla p-\nabla \cdot \left( \mu \left( \nabla \textbf{v} +\nabla \textbf{v} ^{{\text {T}} }\right) \right) +\rho (\textbf{v} \cdot \nabla )\textbf{v}=0\). The simulation results are shown in Fig. 6.4. Here, because the velocity on the surface \(z=\pm h/2\) is zero, we should notice that the temperature or pressure distribution on the surface (mainly referring to the planes \(z=\pm h/2\)) is different from that on the central plane \(z=0\), and it is the latter that is of interest in 2D simulations. From Fig. 6.4, we can see that both the distributions on the surface and the cut plane show good cloaking effects in a low-speed flow environment.
6 Discussion
By now, the coupling between thermal field and fluid movement is unidirectional. In other words, only the velocity would influence the temperature distribution because we have not considered the thermal response of fluid properties like density and viscosity, which might be important in a nonisothermal flow. Taking water as the working medium as we have done in his article, the density change is insignificant compared to viscosity under the applied thermal bias [50]. The dynamic viscosity of water can be expressed as a function of temperature with three parameters: \(\mu =10^{A+\frac{B}{T-C}}\) Pa s, where \(A=-4.5318\), \(B=220.57\) K, and \(C=149.39\) K [51]. Taking \(T=20\) \(^\circ \)C, we can see \(\mu \approx 1\times 10^{-3}\) Pa s, which is just the value we have used for the background material in simulation. When \(\Delta T=10\) K, the thermal response of \(\mu _b\) still has little influence on the temperature or pressure distributions no matter whether we assume \(\mu _1,\mu _2\) and \(\mu _3\) change with temperature of the same magnitude or still let them temperature-independent. When the thermal bias increases, for example, to 50 K, and the four viscosities involved have the same temperature dependence, the functions like cloaking, sensing, and concentrating should not fail. Still, the pressure distribution will demonstrate uneven isobars. This variable viscosity (in fact, its reciprocal) behaves like a nonlinear thermal conductivity in bilayer conductive metadevices [48] (we can do a power series expansion to \(1/\mu \) and get the polynomial form of temperature just like the nonlinear thermal conductivity often used in research). On the other hand, the viscous dissipation term can also be neglected in the framework of creeping flows, compared with the convective heat transfer. The discussion above might help to improve the feasibility of our design in potential practical applications.
Another important question is how to make \(\kappa \) and \(\mu \) tunable in fluid materials. One idea is adding some inclusions or suspensions (like nanoparticles and even active matter) into the medium [52,53,54]. However, we must prevent the inclusions from moving from one domain to another and changing the spatial distribution of \(\kappa \) and \(\mu \). In some recent researches [34,35,36], solid pillars were put into the cell and fixed, which can enhance the effective viscosity of the solid-fluid structure. If viewed from another angle, this technique reduces the cell depth to zero without changing the viscosity of fluids. This technique also changes the thermal conductivity, specific heat, and density in the solid domain and thus influences the corresponding effective properties of the composites. So, the situation can be more complicated, involving tuning \(\kappa \), \(\mu \), \(\rho \), \(C^P\), and even h. In this way, an effective medium theory considering heat transfer and fluid flow is needed to design suitable structures inversely. In Part D of the Supporting Information, we give a 3D cloak structure with only one fluid material by changing the depth of the outer layer and putting pillars in it. Although the parameter estimation is empirically given and relatively rough, our design does exhibit some invisibility effect.
7 Conclusion
In summary, through scattering-cancellation technology, we have established a framework to design bilayer convective metamaterials in a Hele-Shaw cell. We extend this approach to deal with coupled multiphysics. By engineering thermal conductivity and viscosity, we proposed a convective cloak that can realize thermal invisibility and hydrodynamic stealth at the same time. We also discuss the implications of the Reynolds number and directions of applied thermal bias and driving pressures, and the design shows robustness under different convective circumstances. Although we only consider circular layers surrounding a round-shape area, our design can be generalized to other geometries based on the existing and future research on Laplacian bilayer metamaterials, e.g., the elliptical structures [12, 48]. The material parameters needed in our design for each layer and the central area are homogeneous and isotropic, which could be achieved by sold-fluid composites. The related effective medium theory or inverse design technique remains developed. Our study might provide a promising method for feasible and flexible control of multiphysics processes.
8 Supporting Information
Part A: SCT Details for Thermal Convection
For the model shown in Fig. 6.1, the general solution of \(\Phi _i\) (\(i=1\), 2, 3, and b) in the 2D scenario with the circular symmetry can be expressed as
with polar coordinates \((r,\theta )\). By finding the right coefficients \(A_{im},B_{im},\alpha _{im}\) and \(\beta _{im}\) based on the required manipulation function and certain boundary conditions, we can first obtain the inverse solution of thermal conductivities \(\kappa _i\) to realize the manipulation of \(\Phi \). Whether the required function can be realized for the temperature still needs some debates. Different from the familiar boundary conditions at infinity like \(\nabla _x T(r=\infty ) \sim \textbf{e}_x \) (\(\textbf{e}_x \) is the unit vector along the x axis), here we should use \(\nabla _x \Phi (r=\infty ) \sim \textbf{e}_x \) instead, and thus the temperature of a homogeneous medium could not vary linearly along the x axis. The degree of such non-uniformity depends on the value of \(\varphi T\), and the advection part behaves just like a nonlinear thermal conductivity. In addition, to guarantee \(\varphi \) is a constant in the whole system (thus T cannot be a multivalued function on the boundary of two domains), we must require
Here C is a constant. Further, we can assume \(f,\rho ,C^P\) and h are also constants in the whole space and obtain
where \(C'\) is another constant. In other words, we should tailor \(\mu \) to realize a convective metamaterial besides thermal conductivity engineering. It should be noted that Eq. (6.17) also gives the condition for a bilayer fluid-flow metamaterial, if we only consider Eqs. (6.2) and (6.3). We also need to neglect the difference between thermal insulation (the heat flow perpendicular to the boundary is zero) and non-slip (the velocity at the solid boundary is zero) boundary conditions. If the boundary layer is not significant, this neglect can be reasonable. For example, after calculating the thermal conductivity to avoid disturbing the distribution of \(\Phi \) in the background, we can obtain the viscosity not to disturb P. Based on Eq. (6.4), tuning the ratio \({\rho h^2}/{\mu }\) is a more general strategy to make fluid-flow metamaterials. For simplicity, we only consider changing the conductivity and viscosity in the theory part. In this way, f is assumed to be a constant, and we must emphasize this is an approximation. When advection exits, f cannot be a strict constant, e.g., in a homogeneous medium. Nevertheless, we can keep this assumption and check how much the variable f will influence the performance of our design in the numerical simulation part.
In particular, for a convective cloak, we can find the assumption described by Eq. (6.16) can be relaxed by only requiring that it is valid in the background and outer layer. The zero conductivity and infinite viscosity in the inner layer have been enough to make Eq. (6.5) automatically satisfied in the inner layer and the obstacle. As a result, we do not let \(\mu _1/\mu _b=\kappa _b/\kappa _1\) or \(\mu _2/\mu _b=\kappa _b/\kappa _2\) for the numerical simulations. What’s more, since the boundary layers in Fig. 6.3 are quite thin, it will not undermine our assumption Eq. (6.16), i.e., the coefficient \(f(\textbf{r})\) in Eq. (6.6) should be a constant since the density, specific heat and cell depth are all kept invariant.
Part B: Performance with Different Reynolds Numbers
It is important to verify our conclusions under different Reynolds numbers (or Péclet numbers). Compared with pure conduction (Re \(=0\)), a large Re can cause an obvious change in the temperature patterns, which means f is not strictly a constant even for the reference. Nevertheless, we can still test the performance of the cloak designed above. Here, we do three more simulations when \(\Delta P\) takes \(10^2\) Pa, \(10^3\) Pa, and \(10^4\) Pa, respectively, and show the results of the cloak and reference in Fig. 6.5. Since the patterns of pressure distributions should not be changed under the Hele-Shaw regime, we only illustrate the temperature distributions here.
In Fig. 6.5a1 and a2, the pressure difference is \(10^2\) Pa, and the isotherms of the reference are almost evenly distributed. In (b1) and (b2), the pressure difference is \(10^3\) Pa, and the isotherms of the reference show a distinctly uneven distribution. The conductive flux can be neglected when the advective heat transfer is further enlarged in (c1) and (d1). Then the isotherms would be crowded on the side of the cold source (although we did not draw these overly dense isotherms), and the flow is isothermal almost everywhere. Thus the temperature gradient is close to zero except near the cold source. Anyway, we can see the cloaking effect is robust, and the assumption of creeping flow is still valid in the Hele-Shaw cell. Here, the temperature disturbance caused by the obstacle is eliminated by 95%, 81%, and 79%, respectively, for the three columns in Fig. 6.5. The cloaking ratio increases with the contribution of conductive heat transfer because our assumption that f is a constant is fulfilled when advection is absent.
Part C: Performance with Non-parallel Thermal and Pressure Biases
Now we turn to another aspect and consider the two applied biases are not in the same direction. Under this assumption, the relationship described by Eq. (6.6) should be revised. In general, we can decompose \(\nabla P\) into two components which are parallel (\(\nabla P_{\parallel }\)) and perpendicular (\(\nabla P_{\perp }\)) to \(\nabla T\) respectively, writing \( \nabla P=P_{\parallel }+P_{\perp }\), and obtain
\(f(\textbf{r})\) is now defined by \(\nabla P_{\parallel }=f(\textbf{r}) \nabla T\) and equal to \((\nabla P \cdot \nabla T)/(\nabla T \cdot \nabla T)\). A special case is when the applied temperature difference and pressure difference are perpendicular to each other. In this case, we expect the patterns of temperature and pressure distributions approximately have a symmetry under rotating 90\(^{\circ }\). Then, f should be almost a constant (zero) [29] and we can apply SCT again and get the same parameters for the convective cloak.
To test our design, we let the pressure bias take 500 Pa along the y axis while the thermal bias is still kept at 10 K along the x axis. In Fig. 6.6a–d, we give the simulation results of the temperature and pressure distributions for both the cloak and the reference. The isotherms and isobars show the cloaking effect is achieved. More specifically, Fig. 6.6e and f are on a horizontal and a vertical line segments. We can also calculate the percentage of disturbances that are removed in this situation. The ratio for pressure deviation should be the same as its counterpart under parallel applied thermal and pressure biases. The ratio for temperature deviation is a little bit different, taking 79%.
Part D: Three-dimensional Convective Cloak
Here we propose a three-dimensional (3D) structure (see Fig. 6.7) to realize a convective cloak and use only one fluid material. The gray region in Fig. 6.7 illustrates the fluid domain. For simplicity, the inner layer of the cloak is provided as a solid thermal insulation material, so the structure is a monolayer one. Also, we can see that the outer layer has a larger depth than the background, which allows the fluid to have a smaller viscosity. Moreover, the larger depth of the fluid domain can enlarge the effective thermal conductivity due to a larger heat transfer cross-section. However, the increase in effective thermal conductivity caused by the depth alone does not exactly make the outer layer meet the conditions for a thermal cloak. More precisely, the thermal conductivity of the outer layer needs to be further improved. We here combine the two methods used in the references [15, 34]. The outer layer is deeper than required for a normal fluid cloak in Ref. [15], and the too low viscosity is compensated by putting pillars [34] (see the black dots placed in the outer layer in Fig. 6.7a and b) to realize to fluid cloak again. Then, we can tune the thermal conductivity (and the heat capacity) of the pillars to meet the conditions for a convective cloak. The exact parameters of the pillars (volume fraction, thermal conductivity, and the heat capacity) are not easy to be solved through the existing effective medium theory.
As a rough estimation, we still use the same background material (water) and take the depth of the outer layer as \(\sqrt{\dfrac{R_3^2+R_2^2}{R_3^2-R_2^2}}\approx 2.13\) times the background (the ratio is \(\dfrac{R_3^2+R_2^2}{R_3^2-R_2^2}\) in Ref. [15] for a fluid cloak). In addition, four rings of cylindrical pillars are placed in the outer layer, and each ring consists of 90 pillars with a radius of \(\sqrt{\dfrac{f_p(R_3^2-R_2^2)}{N}}\). Here \(N=360\) is the total number of pillars, and \(f_p\) is the volume fraction of the pillars compared to the outer layer, which takes 0.32% in the following simulation. The material occupying the pillars can be air, soft matter, or solids. Here we set its thermal conductivity to be 40 W m\(^{-1}\) K\(^{-1}\), its density to be 1000 kg m\(^{-3}\), and its specific heat to be 5000 J kg\(^{-1}\) K\(^{-1}\), which some mixture might achieve (e.g., copper and polydimethylsiloxane [55]). The simulation results are shown in Fig. 6.8. From the perspective of practical detection, here we give the temperature and pressure distribution of the surface. Although the cloaking effect is not perfect, compared with the case without a cloak (for example, see Fig. 6.2a3 and b3), we can see the bending of isotherms and isobars in the background region is alleviated to a certain extent. The parameters (including the volume fraction, geometry and thermal properties of the pillars, and the depth of the cloak layer) can be further optimized through analytical techniques and numerical methods.
Part E: Simulation Convergence Analysis
Since we adopt the finite element method to model thermal convection, a convergence analysis is necessary for reliability. We can get more accurate and convincing calculation results with the refinement of meshes. For example, we use five different sets of meshes, numbered 1 to 5, to execute independent simulations for the designed thermal cloak in Fig. 6.2. The size parameters of each set are shown in Table 6.1. Three groups of data at the positions (\(x=\pm 0.5\) mm and \(x=0\)) are extracted to compare the results produced by different grids. Bigger mesh numbers correspond to more elements, and ‘Mesh 4’ is the actual mesh used in Fig. 6.2.
We plot the temperature and pressure data read from \(x=-0.5\) mm, \(x=0\) and \(x=0.5\) mm in Fig. 6.9. ‘Mesh 4’ is illustrated with solid lines, while its counterparts using other meshes are drawn in dashed lines with different colors. First, we observe Fig. 6.9a1, b1 and c1, demonstrating temperature comparisons. The latter two sets of mesh (numbered 4 and 5) produce smoother data lines than the first three sets (numbered 1, 2, and 3). In addition, the difference between ‘Mesh 4’ and ‘Mesh 5’ is very small, so the plots almost coincide, meaning that the simulation results of the temperature have converged to good accuracy. The same conclusions can be obtained for the pressure data in Fig. 6.9a2, b2 and c2. Therefore, the results using ‘Mesh 4’ in the previous simulations are credible.
References
Chen, H., Chan, C.T., Sheng, P.: Transformation optics and metamaterials. Nature Mater. 9, 387 (2010)
Zhuledev, N.I., Kivshar, Y.S.: From metamaterials to metadevices. Nature Mater. 11, 917 (2012)
Kadic, M., Bückmann, T., Schittny, R., Wegener, M.: Metamaterials beyond electromagnetism. Rep. Prog. Phys. 76, 126501 (2013)
Fu, X., Cui, T.J.: Recent progress on metamaterials: From effective medium model to real-time information processing system. Prog. Quant. Electron. 67, 100223 (2019)
Pendry, J.B., Schurig, D., Smith, D.R.: Controlling electromagnetic fields. Science 312, 1780 (2006)
Alù, A., Engheta, N.: Achieving transparency with plasmonic and metamaterial coatings. Phys. Rev. E 72, 016623 (2005)
P.-Y. Chen, J. Soric, and A. Alù, Invisibility and cloaking based on scattering cancellation, Adv. Mater. 24, OP281COP304 (2012)
Gömöry, F., Solovyov, M., Šouc, J., Navau, C., Prat-Camps, J., Sanchez, A.: Experimental realization of a magnetic cloak. Science 335, 1466 (2012)
Xu, H., Shi, X., Gao, F., Sun, H., Zhang, B.: Ultrathin three-dimensional thermal cloak. Phys. Rev. Lett. 112, 054301 (2014)
Han, T., Bai, X., Gao, D., Thong, J.T.L., Li, B., Qiu, C.-W.: Experimental demonstration of a bilayer thermal cloak. Phys. Rev. Lett. 112, 054302 (2014)
Han, T., Bai, X., Thong, J.T.L., Li, B., Qiu, C.-W.: Full control and manipulation of heat signatures: cloaking, camouflage and thermal metamaterials. Adv. Mater. 26, 1731 (2014)
Han, T., Yang, P., Li, Y., Lei, D., Li, B., Hippalgaonkar, K., Qiu, C.-W.: Full-parameter omnidirectional thermal metadevices of anisotropic geometry. Adv. Mater. 30, 1804019 (2018)
Li, Y., Liu, C., Li, P., Lu, T., Chen, C., Guo, Z., Su, Y., Qiao, L., Zhou, J., Bai, Y.: Scattering cancellation by a monolayer cloak in oxide dispersion-strengthened alloys. Adv. Funct. Mater. 30, 2003270 (2020)
Xu, G., Zhou, X., Zhang, J.: Bilayer thermal harvesters for concentrating temperature distribution. Int. J. Heat Mass Transfer 142, 118434 (2019)
Tay, F.Y., Zhang, Y.M., Xu, H.Y., Goh, H.H., Luo, Y., Zhang, B.L.: A metamaterial-free fluid flow cloak. Natl. Sci. Rev. nwab205 (2021)
Wang, B., Shih, T.-M., Xu, L., Dai, G., Huang, J.: Intangible hydrodynamic cloaks for convective flows. Phys. Rev. Appl. 15, 034014 (2021)
Ma, Y., Liu, Y., Raza, M., Wang, Y., He, S.: Experimental demonstration of a multiphysics cloak: manipulating heat flux and electric current simultaneously. Phys. Rev. Lett. 113, 205501 (2014)
Lan, C., Bi, K., Gao, Z., Li, B., Zhou, J.: Achieving bifunctional cloak via combination of passive and active schemes. Appl. Phys. Lett. 109, 201903 (2016)
Zhang, X., He, X., Wu, L.: A bilayer thermal-electric camouflage device suitable for a wide range of natural materials. Compos. Struct. 261, 113319 (2021)
Yang, T., Bai, X., Gao, D., Wu, L., Li, B., Thong, J.T.L., Qiu, C.-W.: Invisible sensor: simultaneous sensing and camouflaging in multiphysical fields. Adv. Mater. 27, 7752 (2015)
Fan, C.Z., Gao, Y., Huang, J.P.: Shaped graded materials with an apparent negative thermal conductivity. Appl. Phys. Lett. 92, 251907 (2008)
Narayana, S., Sato, Y.: Heat flux manipulation with engineered thermal materials. Phys. Rev. Lett. 108, 214303 (2012)
Yang, S., Wang, J., Dai, G., Yang, F., Huang, J.: Controlling macroscopic heat transfer with thermal metamaterials: theory, experiment and application. Phys. Rep. 908, 1 (2021)
Li, Y., Li, W., Han, T., Zheng, X., Li, J., Li, B., Fan, S., Qiu, C.-W.: Transforming heat transfer with thermal metamaterials and devices. Nat. Rev. Mater. 6, 488 (2021)
Hu, R., Xi, W., Liu, Y., Tang, K., Song, J., Luo, X., Wu, J., Qiu, C.-W.: Thermal camouflaging metamaterials. Mater. Today 45, 120 (2021)
Darcy, H.: Les Fontaines Publiques de la Ville de Dijon. Dalmont, Paris (1856)
Urzhumov, Y.A., Smith, D.R.: Fluid flow control with transformation media. Phys. Rev. Lett. 107, 074501 (2011)
Bowen, P.T., Urzhumov, Y.A., Smith, D.R.: Wake control with permeable multilayer structures: the spherical symmetry case. Phys. Rev. E 92, 063030 (2015)
Dai, G., Shang, J., Huang, J.: Theory of transformation thermal convection for creeping flow in porous media: cloaking, concentrating, and camouflage. Phys. Rev. E 97, 022129 (2018)
Dai, G., Huang, J.: A transient regime for transforming thermal convection: cloaking, concentrating and rotating creeping flow and heat flux. J. Appl. Phys. 124, 235103 (2018)
Yeung, W.-S., Mai, V.-P., Yang, R.-J.: Cloaking: Controlling thermal and hydrodynamic fields simultaneously. Phys. Rev. Appl. 13, 064030 (2020)
Yang, F., Xu, L., Huang, J.: Thermal illusion of porous media with convection-diffusion process: transparency, concentrating, and cloaking. ES Energy Environ. 6, 45 (2019)
Xu, L., Huang, J.: Chameleonlike metashells in microfluidics: a passive approach to adaptive responses. Sci. China-Phys. Mech. Astron. 63, 228711 (2020)
Park, J., Youn, J.R., Song, Y.S.: Hydrodynamic metamaterial cloak for drag-free flow. Phys. Rev. Lett. 123, 074502 (2019)
Park, J., Youn, J.R., Song, Y.S.: Fluid-flow rotator based on hydrodynamic metamaterial. Phys. Rev. Appl. 12, 061002 (2019)
Park, J., Youn, J.R., Song, Y.S.: Metamaterial hydrodynamic flow concentrator. Extreme Mech. Lett. 42, 101061 (2021)
Boyko, E., Bacheva, V., Eigenbrod, M., Paratore, F., Gat, A.D., Hardt, S., Bercovici, M.: Microscale hydrodynamic cloaking and shielding via electro-osmosis. Phys. Rev. Lett. 126, 184502 (2021)
Hele-Shaw, H.S.: The flow of water. Nature 58, 34 (1898)
Sutera, S.P., Skalak, R.: The history of Poiseuille’s law. Annu. Rev. Fluid Mech. 25, 1 (1993)
Saffman, P.G.: Viscous fingering in Hele-Shaw cells. J. Fluid Mech. 173, 73 (1986)
Stone, H.A., Stroock, A.D., Ajdari, A.: Engineering flows in small devices: microfluidics toward a lab-on-a-chip. Annu. Rev. Fluid Mech. 25, 381 (2004)
Rajchenbach, J., Leroux, A., Clamond, D.: New standing solitary waves in water. Phys. Rev. Lett. 107, 024502 (2011)
Box, F., Peng, G.G., Pihler-Puzović, D., Juel, A.: Flow-induced choking of a compliant Hele-Shaw cell. Proc. Natl. Acad. Sci. U.S.A. 117, 30228 (2020)
Panton, R.L.: Incompressible Flow, 4th edn. Wiley, Hoboken (2013)
Bejan, A.: Convection Heat Transfer, 4th edn. Wiley, Hoboken (2013)
Dai, G.L., Zhou, Y.H., Wang, J., Yang, F.B., Qu, T., Huang, J.P.: Convective cloak in Hele-Shaw cells with bilayer structures: Hiding objects from heat and fluid motion simultaneously. Phys. Rev. Appl. 17, 044006 (2022)
Kirchhoff, G.: Vorlesungen über die Theorie der Wärme. Teubner, Leipzig (1894)
Xu, L., Huang, J.: Metamaterials for manipulating thermal radiation: transparency, cloak, and expander. Phys. Rev. Appl. 12, 044048 (2019)
Xu, L., Yang, S., Huang, J.: Passive metashells with adaptive thermal conductivities: chameleonlike behavior and its origin. Phys. Rev. Appl. 11, 054071 (2019)
Haynes, W.M.: CRC Handbook of Chemistry and Physics, 97th edn. CRC Press, Boca Raton (2017)
Viswanath, D.S., Ghosh, T., Prasad, D.H.L., Dutt, N.V.K., Rani, K.Y.: Viscosity of Liquids: Theory, Estimation, Experiment, and Data. Springer, Dordrecht (2007)
Liu, M.-S., Lin, M.C.-C., Tsai, C.Y., Wang, C.-C.: Enhancement of thermal conductivity with Cu for nanofluids using chemical reduction method. Int. J. Heat Mass Transf. 49, 3028 (2006)
Tuteja, A., Duxbury, P.M., Mackay, M.E.: Multifunctional nanocomposites with reduced viscosity. Macromolecules 40, 9427 (2007)
Rafaï, S., Jibuti, L., Peyla, P.: Effective viscosity of microswimmer suspensions. Phys. Rev. Lett. 104, 098102 (2010)
Shang, J., Tian, B.Y., Jiang, C.R., Huang, J.P.: Digital thermal metasurface with arbitrary infrared thermogram. Appl. Phys. Lett. 113, 261902 (2018)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
Copyright information
© 2023 The Author(s)
About this chapter
Cite this chapter
Xu, LJ., Huang, JP. (2023). Theory for Hele-Shaw Convective Cloaks: Bilayer Scheme. In: Transformation Thermotics and Extended Theories. Springer, Singapore. https://doi.org/10.1007/978-981-19-5908-0_6
Download citation
DOI: https://doi.org/10.1007/978-981-19-5908-0_6
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-5907-3
Online ISBN: 978-981-19-5908-0
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)