Abstract
The incentive for developing microbial cell factories for production of fuels and chemicals comes from the ability of microbes to deliver these valuable compounds at a reduced cost and with a smaller environmental impact compared to the analogous chemical synthesis. Another crucial advantage of microbes is their great biological diversity, which offers a much larger “catalog” of molecules than the one obtainable by chemical synthesis. Adaptation to different environments is one of the important drives behind microbial diversity. We argue that the Red Sea, which is a rather unique marine niche, represents a remarkable source of biodiversity that can be geared towards economical and sustainable bioproduction processes in the local area and can be competitive in the international bio-based economy. Recent bioprospecting studies, conducted by the King Abdullah University of Science and Technology, have established important leads on the Red Sea biological potential, with newly isolated strains of Bacilli and Cyanobacteria. We argue that these two groups of local organisms are currently most promising in terms of developing cell factories, due to their ability to operate in saline conditions, thus reducing the cost of desalination and sterilization. The ability of Cyanobacteria to perform photosynthesis can be fully exploited in this particular environment with one of the highest levels of irradiation on the planet. We highlight the importance of new experimental and in silico methodologies needed to overcome the hurdles of developing efficient cell factories from the Red Sea isolates.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Humans have exploited microorganism for production of fermented food products for thousands of years, but with the identification and isolation of microbial species responsible for specific fermentation process, e.g., production of beer and wine, the path was opened for wider use of microorganisms for production of chemicals. This led Chaim Weismann to develop a fermentation process for production of acetone-butanol-ethanol during World War 1 (Weizmann 1915), a process that was used for about 50 years to produce acetone and is today being revived for production of 1-butanol that can be used as a chemical building block and as a biofuel. A few years later, the filamentous fungus Aspergillus niger was identified to have the ability to produce citric acid at conditions of very low pH, and this led to the development of the first large-scale aerobic fermentation process for production of citric acid (Currie 1917). Today this process is still in use for production of citric acid that is used in soft drinks and for food preservation (Papagianni 2007). Another landmark in industrial fermentation was the development of a large-scale process for production of penicillin, which was discovered by Alexander Fleming in 1929 (Fleming 1944). It took several years from the original discovery to development of an industrial process, primarily due to belief that penicillin could be synthesized chemically. However, during World War 2 the War Production Board in the USA decided to endorse the fermentation route, which resulted in production of the first large-scale batches of penicillin in 1943. The development of an industrial scale fermentation process for production of penicillin was challenging. Knowledge from citric acid production at large scale could be used, but as penicillin production is not at low pH it was necessary to develop the technology for sterilization of production fermenters and ensure provision of large amounts of sterile air required for the aerobic production process. Following World War 2, the same technology used for production of penicillin could rapidly be applied for production of many other antibiotics that were discovered in the 1950s and 1960s. Development of the abovementioned three production processes each represent technological breakthroughs that today supports a billion USD industry where microorganisms are used for production of pharmaceuticals, enzymes, biofuels, chemicals, food, and feed ingredients, and we will later provide a brief review of products currently produced by microbial fermentation. Even though the production of recombinant proteins used as pharmaceuticals represent a major contribution of this market value, with an estimated value of about USD 100 billion (Nielsen 2013), the production of fuels and chemicals is increasing rapidly with a market value of USD 32 billion in 2010 and estimated to be above USD 75 billion in 2017.
There are three key drivers for the fuel and chemical industry to shift towards bio-based production: (1) The opportunity to produce new molecules that have improved properties compared with currently available chemicals. A good example of this, as will be discussed later, is lactic acid to be used for production of polylactic acid (PLA). PLA has a number of properties as a polymer that makes it well suited for wide applications, including fabrics to be used in sports clothes and biodegradable packing materials (Lunt 1998). (2) The opportunity to produce chemicals cheaper than through traditional routes. Even though the chemical industry has been extremely successful in producing a wide range of chemicals from oil, some chemicals are hard to produce at low costs through cracking and catalysis. A good example of this is 1,3 propanediol, as also will be discussed below, that can be used to produce Sorona®, a valuable polymer that is used in fabrics and carpets (Ritter 2003). (3) The opportunity to produce chemicals with a reduced environmental footprint. Many new biotech processes have a lower environmental footprint than traditional chemical synthesis, not only in terms of carbon dioxide emission but also in terms of water and energy usage. Furthermore, through the use of plant materials, either crops or biomass, there is a sustainable availability of the feedstock used, which makes the production independent of oil availability (Shahzad et al. 2013).
There are, however, several challenges for developing a bio-based process for chemical production: (1) Bio-based production requires development of a cell factory that can efficiently convert the feedstock, typically sugar, to the product of interest. This requires extensive engineering of the cellular metabolism, which is challenging due to extensive regulation of metabolism in living cells. (2) It is important to have continuous access to a feedstock that can be used for production for microbial fermentation. (3) Development of a bioprocess that is matched with the cell factory and that can ensure low cost production of the chemical at large scale. Here we will briefly review current bio-based production of fuels and chemicals and we will thereafter discuss the opportunities for developing bio-based production of fuels and chemicals in the Middle East. Our discussion will follow the concept illustrated in Fig. 1.
The current bioindustry
As mentioned above, the market for renewable chemicals is growing rapidly and a list of some of the major products is provided in Table 1. One observation from this list is that relatively few cell factories are used for production of a quite wide range of chemical compounds, and these widely used cell factories are typically referred to as platform cell factories (Nielsen and Keasling 2016). The main reason for this is the challenge of developing an efficient cell factory, and industries therefore prefer to use cell factories for which there is a large knowledge base, both in terms of genetics and physiology and in terms of industrial scale production. The largest market for fermentation products, by far, in terms of volume is ethanol, which is used as a biofuel. Ethanol is predominantly produced in the USA and in Brazil from corn and sugar cane, respectively. This process has become the benchmark for many other industrial fermentation processes, both in terms of defining bioprocessing costs and in terms of defining requirements for the cell factory. It is a relatively low-cost process as there is no need for aeration. The rapid production of ethanol prevents, to a large extent, contamination of the bioreactor, which means that costs for sterilization can be reduced or even completely eliminated. Based on Fig. 1, we envisage that by using highly saline water from the Red Sea combined with salt-tolerant cell factories, it will similarly be possible to establish bioprocesses that have similarly reduced (or no) costs for sterilization of the feedstock. Below we will discuss some of the challenges associated with development of novel bioprocesses and thereafter describe a few bioprocesses introduced in recent years due to either the ability to reduce costs and environmental footprint or to provide new chemicals.
Challenges in developing new bioprocesses
As mentioned in the introduction, there are three key challenges in connection with developing of a bioprocess: (1) developing of the biocatalyst, or cell factory; (2) ensuring feedstock for the bioprocess; and (3) developing a cost efficient bioprocess. The key challenge in connection with developing a novel bioprocess is the engineering of an efficient biocatalyst, i.e., the cell factory, and typical costs for developing a novel bioprocess amounts to US$50–100 million, whereof a major fraction is for cell factory development (Nielsen and Keasling 2016). Development of a cell factory involves the following steps (Nielsen and Keasling 2016): (1) molecule identification; (2) pathway identification; (3) reconstruction of relevant pathway in chosen cell factory; and (4) optimization of the titer, rate, and yield (TRY) required for a cost competitive process. Molecule identification will typically come as input from the industry segment where the chemical is going to be applied and requires a detailed analysis of market developments as well as the associated intellectual property, i.e., it is possible to obtain freedom to operate in terms of engineering of the cell factory and subsequent production in countries of interest. When a proper molecule has been identified, the next step is to identify if there is a known biological route for biosynthesis of this molecule. With the immense biological variability, it is often possible to find a suitable metabolic pathway leading to the chemical of interest, but in some cases, it may be necessary to develop novel enzymes, which is challenging but feasible. When a pathway has been identified, the genes encoding the individual enzymes will be cloned into the cell factory chosen for the production process. As mentioned earlier, there is a tendency to use one of the few cell factories as production platform, generally referred to as cell factory platforms.
There are several reasons why industry prefers to use a few cell factory platforms: (1) Cell factory development typically involves extensive engineering of the cellular metabolism and therefore involves several rounds of the so-called Design-Build-Test (DBT) cycle (Fig. 2). It is therefore advantageous to use extensively studied organisms, like Saccharomyces cerevisiae and Escherichia coli. These two are arguably the best studied microorganisms, with a wealth of knowledge available, both at the genome level, i.e., extensive omics data, and at the molecular level, e.g., at the enzymology level, and it is therefore easier to engineer these for improving the TRY. However, for some products, these organisms are not well suited and other cell factories are therefore chosen in these cases. For instance, S. cerevisiae and E. coli are not well suited for high-level secretion of proteins, and Aspergilli and Bacilli are therefore often used as cell factories for production of industrial enzymes. Furthermore, Corynebacteria are very efficiently producing and secreting amino acids and are therefore used for production of amino acids and hereof derived products. (2) In order to engineer the cell factory, it is necessary to have good genetic tools. This again favors well-studied organisms like S. cerevisiae and E. coli, but with the introduction of CRISPR-Cas9 technologies, it is becoming possible to easily engineer many other cell factories. (3) It is important to have organisms that are tolerant to industrial-like conditions. In many cases, industrial fermentations are carried out using complex feedstocks that may cause high osmotic pressure, low pH, and high temperatures. Organisms that have proven to tolerate these conditions will be preferred, as it is generally difficult to engineer the organism to have improved tolerance (generally characterized as complex traits). (4) Finally, it is important to have knowledge on how the cell factory functions at large scale, i.e., does prior knowledge exist about how studies in the laboratory translates to large-scale fermentation processes. It is quite expensive to scale-up a process and it is therefore important to have knowledge from previous scale-up studies with the same cell factory. The move towards the use of a few cell factories is best illustrated by the enzyme industry. Traditionally, many different cell factories were used for production of different enzymes, but today leading companies like Novozymes and DuPont rely on the use of a few cell factory platforms, e.g., A. niger, Aspergillus oryzae, Bacillus subtilis and Bacillus clausii. The use of only a few cell factory platforms has allowed the industry to rapidly develop a production process for a new enzyme, as the technology basically becomes plug-and-play where the gene encoding a new enzyme is simply inserted into an efficient enzyme producer, and the resulting cell factory can be transferred to large-scale production following a few tests in the laboratory.
Even though it may be challenging to reconstruct a biosynthetic pathway in a given cell factory, this has now been demonstrated for a wide variety of products (Wang et al. 2012; El Zoeiby et al. 2001; Rugbjerg et al. 2013; Xu et al. 2012; Li et al. 2011; Sun et al. 2010). The choice of cell factory depends on the properties of the product and the pathway to be reconstructed. Thus, for commodity-like products, where high rates are important for the economics of the process, E. coli is to be preferred, as illustrated by the use of this cell factory for the production of 1,3-propanediol (Emptage et al. 2003; Diaz-Torres et al. 2000) and 1,4 butanediol (Yim et al. 2011). However, if the product is an organic acid, it is preferential to use an organism that can tolerate low pH as the product can hereby be produced directly in its acid form. A. niger is therefore used for production of citric acid, and a low pH-tolerant yeast was chosen by Cargill for the development of their new lactic acid production process (Rush 2012). For reconstruction of complex plant pathways, S. cerevisiae is typically preferred over E. coli, as it is difficult to express P450 enzymes in bacteria, which is illustrated by the production of both resveratrol (Mei et al. 2015) and hydrocortisone (Szczebara et al. 2003) using S. cerevisiae. The reconstruction of a plant pathway in yeast was recently taken to the extreme by expressing a 23 enzymatic step pathway for production of opioids (Galanie et al. 2015), but even though the opioids were produced in low levels, it was necessary to engineer the yeast endogenous metabolism to ensure product formation (Galanie et al. 2015). Reconstruction of a biosynthetic pathway in the cell factory of choice is an important step towards industrial production, but as mentioned above, it is subsequently necessary to improve the TRY in order to establish a process. Improving the TRY generally involves many rounds of the DBT cycle and is therefore costly. The reason for this is that metabolism in all organisms has evolved to serve specific purposes, e.g., for yeast to rapidly convert sugars to ethanol in order to capture energy needed for growth and at the same time make a toxic product that prevents growth of competitors. This means that extensive regulatory systems have evolved to ensure that the metabolism is operating robustly, even when the cells are exposed to various perturbations. Due to this tight regulation, it is difficult to redirect the fluxes inside the cell, e.g., to redirect the metabolism from efficiently producing ethanol to producing farnesene.
Whereas the major challenge in developing a new bioprocess is with developing the cell factory, there are also challenges associated with matching the cell factory design with the feedstock that is going to be used for the production. In the bioethanol industry, different yeast strains are used for production in Brazil, where the feedstock is sugar cane (Basso et al. 2008), and in the USA, where the feedstock is primarily corn (Song et al. 2016). Thus, for designing a new bioprocess, it is important to have in mind what the feedstock is going to be for the final bioprocess. The cell factory can be engineered to adapt to alternative feedstock, as illustrated by the extensive engineering of S. cerevisiae to use lignocellulosic hydrolysates as a feedstock (Matshushika et al. 2009), and which has now resulted in initiation of second generation ethanol production. Another important aspect to consider is how the fermentation will be integrated with downstream processing and purification of the product. This may have an impact on the cell factory choice and on the design criteria for the cell factory, in particular on how it is going to be tested in each round of the DBT cycle.
Lower costs, stable production, and lower environmental footprint
For a number of chemicals that have traditionally been produced from petrochemicals or by extraction from plants, the chemical industry has been seeking to establish bio-based production, for primarily the three following reasons: (1) to reduce costs, (2) to ensure stable production, and/or (3) to reduce the environmental footprint. Two of the early examples of this were the development of a process for bio-based production of riboflavin by BASF and of 7-ADCA by DSM. Riboflavin (vitamin B2) is used both as a dietary supplement for humans and in feed, and is therefore produced in large volume. Traditionally, riboflavin was produced through chemical synthesis, but by developing a riboflavin-producing bioprocess through engineering of the filamentous fungus Ashbya gossypii, BASF were able to reduce the associated water emissions by 67% and carbon dioxide emissions by 80%, primarily due to reduced energy and water usage (Ledesma-Amaro et al. 2015). 7-ADCA is a precursor for production of the widely used antibiotics cephalexin, and traditionally, 7-ADCA was produced chemically from penicillin. However, by metabolic engineering, a high-yielding strain of Penicillium chrysogenum, DSM, established a process for production of adipoyl-7-ADCA that can easily be enzymatically cleaved to adipic acid and 7-ADCA. The bioprocess reduced carbon dioxide emissions by 5% and reduced water and energy usage by 75% and 20%, respectively (Erickson and Hessler 2004).
Many chemicals are obtained from plant sources. Typically, their chemical structure makes them difficult to chemically synthesize and it is therefore cheaper to extract them from plants, even though the yields are very low. A good example of this is artemisinin, which is one of the most efficient antimalarial drugs (WHO 2016). This compound is extracted from Artemisia annua, sweet wormwood. There have been large variations in supply, primarily because of the long time between planting and harvest, i.e., farmers have planted extensively when supply was low (and price high), resulting in over-production and dropping prices a few years later. In order to ensure a more stable production, Prof. Jay Keasling and his research group at the University of California Berkeley undertook a large metabolic engineering project on developing a bioprocess for production of artemisinin. Initial work was done in E. coli (Tsuruta et al. 2009), but as it was hard to express P450 enzymes in this organism, the group switched to yeast as a cell factory (Ro et al. 2006). Following initial development at University of Berkeley, the work was transferred to Amyris, who later partnered with Sanofi-Avensis for industrial production. The research and development work was to a large extent financed by the Bill & Melinda Gates Foundation, who required that the companies involved should sell artemisinin not-for-profit. In 2014, this process reportedly delivering more than 337 million doses of artemisinin-based combination therapies (ACTs), successfully reducing the global malaria burden (WHO 2016). The engineering of yeast for efficient production of the chemical was a major undertaking and involved identification of novel enzymes, engineering of yeast endogenous metabolism and further chemical conversion to obtain the final product (Ro et al. 2006; Westfall et al. 2012; Ro et al. 2008; Paddon et al. 2013). Another plant product for which there has been developed a bioprocess for production is resveratrol. This chemical is an antioxidant present in grapes and it is sold as a dietary supplement. Traditionally, it was extracted from Japanese knotweed, but the company Fluxome reconstructed the resveratrol biosynthetic pathway in yeast, and through further metabolic engineering, a yeast strain was developed that could produce cost-competitive resveratrol resulting in a commercial process (Smits et al., 2011). In 2012, the technology was acquired by Evolva, who is today marketing yeast based resveratrol (Baerends et al. 2014). Resveratrol is derived from either tyrosine or phenylalanine, but it also requires efficient provision of malonyl-CoA and efficient production therefore requires a number of different metabolic engineering steps (Li et al. 2015). Sesquiterpenes are another class of plant metabolites for which there has been much interest in establishing microbial fermentation processes for their production. This is a wide group of chemicals (in the class of isoprenoids) that find many different applications, e.g. perfume ingredients and pharmaceuticals. Through collaboration with Firmenich, we were involved in the early development of a yeast platform for production of sesquiterpenes to be used as perfume ingredients (Asadollahi et al. 2009). The perfume ingredient industry is interested in producing their chemicals using microbial fermentation, as this will enable scalable production and independence from fluctuations in the supply of the plant raw material. Through several rounds of the DBT cycle, we managed to significantly improve the production of α-santalene, normally extracted from sandal wood oil (Schalk and Clark 2007). Today, Firmenich and other companies have partnered with Amyris and/or Evolva for production of many of their perfume ingredients.
Chemical building blocks used for production of plastic polymers are among the chemicals produced and sold in largest volumes. Thus, 1,3 propanediol, traditionally produced by chemical synthesis, used in the production of plastic, detergents, adhesives, composites, antifreeze and heat-transfer industrial fluids coatings, polyurethanes and cosmetics, and 1,4 butanediol, traditionally produced from petroleum-derived feedstock used in the production of plastic, elastic fiber, and polyurethanes are each produced in large volumes. In connection with the development of their new polymer Sorona®, DuPont were, however, interested in developing a bio-based production as this would allow them to reduce costs and also the environmental footprint. Through collaboration with Genencor, they performed extensive metabolic engineering of E. coli and thereby developed a cell factory for production of 1,3 propanediol (Nakamura and Whited 2003). In collaboration with Tate & Lyle, they further developed a completely new bioprocess, which was necessary as this was the first large-scale production process using E. coli as a cell factory. The development of this process represents one of the milestones in bio-based production as it was the first example of complete metabolic engineering of a cell factory for production of a non-natural-produced chemical combined with development of a novel bioprocess for large-scale production. More recently, Genomatica performed metabolic engineering of E. coli for production of 1,4 butanediol (Yim et al. 2011). Through several rounds of the DBT cycle, they obtained an E. coli strain that could produce more than 18 g/L in a 140-h fermentation process (Yim et al. 2011). Through partnering with BASF, Novamont, and Cargill, they developed a commercial process for production of 1,4 butanediol, which hereby became the second commodity type chemical produced by microbial fermentation (Burgard et al. 2016).
New chemicals with desirable properties
The chemical industry is constantly looking for chemicals with new, interesting properties. A classic example of this is the invention of nylon by DuPont in the 1930’s. The very high oil prices around 2008 resulted in the establishment of a large number of projects and biotech companies focusing on production of advanced biofuels, i.e., chemicals that have improved properties compared with ethanol. Ethanol is in many ways an excellent drop-in fuel, but it does have some drawbacks: (1) its energy content is quite low and (2) it is hydroscopic, i.e., it attracts water and it is therefore not suitable for use in boat engines, and this also makes it unsuitable for transport via pipelines. There has therefore been much interest in producing butanol, which has a higher energy density and is less hydroscopic than ethanol, and is therefore an ideal drop-in fuel in gasoline. Furthermore, isobutanol can easily be chemically converted to isobutylene, which is used to make isooctane, isooctene, and jet fuel. This resulted in two large initiatives for production of isobutanol, one driven by Butamax, a joint venture between DuPont and BP, and the other driven by Gevo (Hong and Nielsen 2012). Both companies performed extensive metabolic engineering of yeast in order to develop a cell factory that could meet the TRY requirement for production of isobutanol, and currently Gevo is producing isobutanol commercially. Another large initiative has been driven by Amyris, who used their yeast platform strain for production of farnesene, which is a sesquiterpene derived by a single enzymatic step from the endogenous yeast metabolite farnesylpyrophosphate (Hong and Nielsen 2012; Tippmann et al. 2016). In 2010, Amyris partnered with Total on development of this process, and even though the yeast cell factory is still being further improved, Amyris is producing farnesene to be used as jet fuel and as a drop in fuel in diesel for busses in Brazil.
In the last couple of years, there has been much focus on production of other types of hydrocarbons, in particular alkane and alkenes. This was initiated by the identification of the enzymes responsible for the conversion of fatty acids to alkanes and reconstruction of these in E. coli (Choi and Lee 2013). Today many more enzymes have been discovered (Kang and Nielsen 2016) also allowing for production of short chain alkanes/alkenes in E. coli (Choi and Lee 2013). Recently alkane production was also demonstrated in S. cerevisiae (Buijs et al. 2015; Foo et al., 2017) and through engineering of the fatty acid production, it was demonstrated possible to improve the production of alkanes/alkenes significantly (Zhou et al. 2016).
As mentioned above, another example of a new chemical introduced is polylactic acid (PLA), a polymer derived from lactic acid. Polymer chemists at Cargill identified a route for production of PLA, in which a very pure form of the L-isomer is required for production of polylactic acids with high melting point and high crystallinity (Lunt 1998). Lactic acid, which is used in the food industry for preservation, is traditionally produced by fermentation of lactic acid bacteria (LAB), but these cell factories require complex media as they are auxotrophic for several amino acids. It is therefore costly to obtain a pure form of lactic acid and this led Cargill researchers to look for an alternative cell factory that could grow on a minimal medium. They added the ability to grow and produce lactic acid at low pH as an additional criterion, as this would allow them to produce lactic acid directly and not lactate, as produced by LAB. As it is the lactic acid that is required for polymerization, the use of lactate would require a conversion to lactic acid through addition of an inorganic acid and this would result in production of 1.2 kg of gypsum per kilogram of lactic acid produced. Their search resulted in the identification of a low pH-tolerant yeast species that they could eventually engineer to efficiently produce lactic acid and convert this further to PLA (Rush 2012). This resulted in establishment of a 140,000-metric tons/year production plant of PLA in Blair, Nebraska, USA (Nature Works LLC 2005). This case is interesting as it is a clear demonstration that it may be beneficial to use a non-conventional cell factory for a new bioprocess. It required significant investments by Cargill to develop the genetic tools for metabolic engineering of their yeast strain, but they are now offering the yeast strain together with tools as a technology package for other companies interested in producing organic acid. This has recently been exploited by BioAmber for production of succinic acid (Hartmann 2010), which is of much interest as a chemical building block for a variety of polymers, that is, bio-based succinic acid can be transformed into 1,4-butanediol (BDO) and tetrahydrofuran (THF) in a single catalytic step (Cavani et al. 2016).
Harnessing the biodiversity of the Red Sea: Transition to renewable resources
The Middle East countries currently have a largely oil-dependent industry and infrastructure, which results in very high carbon emissions per capita; e.g. 55 tons per capita in the United Arab Emirates, compared to only 22 tons per capita in the US (Zafar 2017). To change this trend, the region is anticipating investments in renewable energy in the order of $35 billion per year by the year 2020 (Zafar 2017). However, many countries in the region have severe limitations in producing biomass to replace oil, simply because the arable land is very scarce. For example, Saudi Arabian territory is mostly desert, and only 1.5% of the land is arable (Crop Trust 2017). A viable alternative for such countries is to turn to photosynthetic sea organisms for biomass production and engineering of cell factories.
The Red Sea is a prime example of such an alternative bio-resource. It stretches approximately 2250 km in length, but it is largely an isolated body of water, as the southern opening is merely a narrow passage to the Indian Ocean and there are no rivers flowing into it. This desert bound sea exhibits consistently high salinity gradient (36–41 p.s.u) owing to high surface evaporation in the north, and maintains a uniform temperature of 21.5 °C below the heated (28–32 °C) surface layer. Consequently, this body of water is uniquely warmer, has low nutrient content and is hypersaline with more than 10% of the fish species being endemic (Di Battista et al. 2013). It is an implied evolutionary incubator that occasionally exports species into the adjacent Indian Ocean (Di Battista et al. 2013). The diverse Red Sea ecosystem includes reef sharks, dolphins, turtles, stingrays, sea urchins, sea cucumbers and a huge variety of corals, sponges, mollusks and smaller fish species. All these depend on the hypersaline adapted bacteria and archaea to maintain ecological balance of the reef. This particular ecological niche represents an untapped potential for developing efficient cell factories along two main axes (Fig. 1). Firstly, it could be expected to provide access to new salt-tolerant, thermotolerant and organic solvent-tolerant enzymes and specific metabolic pathways that evolved in this particular environment (Khandeparker et al. 2011; Xin and Hui-Ying 2013; Yu and Li 2014). Those features are particularly interesting for industrial processes, and could significantly expand our synthetic biology toolbox. Secondly, the ability of local organisms to grow in a high salinity environment could lead to isolation of saline-tolerant cell factories that can be used for biosustainable production of fuels and chemicals using saline water as a source for production. This would considerably reduce the risk of contamination and bypass the requirement for desalination, which is extremely expensive and generates a large environmental footprint. Under the economic diversification plan “Vision 2030”, Saudi Arabia aims to take a regional lead in the process of developing new technologies for bio-based production of high value chemicals by Red Sea microorganisms. The King Abdullah University of Science and Technology (KAUST) therefore runs a broad research program aiming to deliver the key enabling technologies for this transition to bio-based economy. In the previous sections we have outlined and discussed the key global drivers for the shift to bio-based production: expanding the range of molecules produced by cell factories, and reducing the price and the environmental footprint of the production. The main challenges we outlined are the correct choice of the cell factory, development of engineering tools, and matching the desired product with access to feedstock and the metabolic capacity of the cell factory. In the following sections, we will discuss how these particular challenges could be addressed in the region, using the biodiversity potential of the Red Sea. We will focus on screening for the most promising cell factories that can be derived from the local environment, and production processes that match the metabolic setup of the local cell factories and the available carbon sources.
Hypersaline adapted bacteria inhabiting the Red Sea
The unique Red Sea ecosystems epitomize huge opportunities for successful identification of novel biocatalysts, as well as microbial cell factories. Consequently, diverse Red Sea associated microbiomes have been the focus of several recent studies at KAUST, including those from different environments: mangrove sediment (Al-Amoudi et al. 2016a; Al-Amoudi et al. 2016b; Alzubaidy et al. 2016; Simões et al. 2015), sea water (Qian et al. 2011; Jimenez-Infante et al. 2016), coral (Bayer et al. 2013), sponge (Gao et al. 2015; Tian et al. 2014), and extreme niches such as Red Sea brine pools (Mwirichia et al. 2016; Zhang et al. 2015; Kamanda Ngugi et al. 2015; Siam et al. 2012; Abdallah et al. 2014; Antunes et al. 2015; Behzad et al. 2016; Jimenez-Infante et al. 2014; Grötzinger et al. 2014). Such studies focused on relevant microbial bioactivities, such as for example antibacterial activity (Sagar et al., 2013a, b; Moitinho-Silva et al. 2014; Abdelmohsen et al. 2014). Metagenomics studies of Red Sea samples show a distinctive composition of local microbiota, quite distinct from other marine environments (Thompson et al. 2013). This is a specific consequence of the 25 Red Sea brine pools, thought to be inhospitable to organic life, harboring bacteria that thrive in these hydrothermal and hypersaline deep-sea environments (Mwirichia et al. 2016; Zhang et al. 2015; Kamanda Ngugi et al. 2015; Grötzinger et al. 2014; Siam et al. 2012; Abdallah et al. 2014; Antunes et al. 2015; Behzad et al. 2016; Jimenez-Infante et al. 2014). An interesting study of vertical stratification was reported for two hydrothermal and hypersaline deep-sea pools in the Red Sea: the Atlantis II and Discovery. A metagenomic study of the two deep-sea pools showed that alpha-Proteobacteria dominated the deep sea, Planctomycetaceae, or Deferribacteres dominated the brine-seawater interfaces, while gamma-Proteobacteria dominated brine pools (Bougouffa et al. 2013). Multivariate analysis of the data indicated that temperature and salinity were the two major influences shaping the composition of these communities. From the metagenome analysis, a novel mercuric reductase was derived, which was collected from the lower convective layer (LCL) of the Atlantis II (ATII) deep brine pool (Sayed et al. 2014). The amino acid sequences for this ATII-LCL mercuric reductase differs from the soil derived orthologs by only <10% but exhibits striking functional differences as it is in vivo functional in high salt, stable at high temperature, efficiently detoxifies, and is resistant to increased levels of Hg2+ in vivo (Sayed et al. 2014). This indicated that the Red Sea extremophiles have developed specific metabolic pathways and enzymes to cope with their environment, and they can clearly serve as a source for potential biotechnology-based applications. Genomes of several microorganisms with unusual features were also isolated and sequenced, such as Candidatus Synechococcus spongiarum (Gao et al. 2014), a sponge symbiont, and several extremophiles isolated from the deep-sea anoxic brine lakes, including Haloplasma contractile (Antunes et al. 2011a), Halorhabdus tiamatea (Antunes et al. 2011b), and Salinisphaera shabanensis (Antunes et al. 2011c). Haloplasma contractile was reported to represent a new order situated between Firmicutes and Mollicutes (Antunes et al. 2011a). This bacterium has an unusual morphology with contractile protrusions. In line with this observation, its genome harbors an unusually high number of MreB/Mbl homologs that are known to play a role in cell morphogenesis. Halorhabdus tiamatea is the first archaeon isolated from deep-sea anoxic brine lakes (Antunes et al. 2011b). A genome comparison with Halorhabdus utahensis suggests that H. tiamatea has significantly more transmembrane transport genes and a putative trehalose synthase and lactate dehydrogenase (LDH). Trehalose synthase has never been detected in other members of Halobacteriaceae. Also, no LDH homologs had been detected in haloarchaeal genomes, even though LDH activity has been reported in Halobacterium salinarum cell extracts (Bhaumik and Sonawat, 1994).
Since most of the downstream experiments conducted on isolated strains critically depend on findings in the initial metagenomic screens, and because the detailed functional annotation of newly sequences microbial genomes is time-consuming due to integration of variety of experimental and computational data, a pipeline for Automatic Annotation of Microbial Genomes (AAMG) was developed (Alam et al. 2013). This annotation pipeline can be accessed through INDIGO web server (freely available at http://www.cbrc.kaust.edu.sa/indigo). INDIGO is a data warehouse system that not only provides integration of annotations for exploration of information but also enables detailed analysis of newly sequenced microbial genomes.
Identification of novel cell factories from the Red Sea isolates
As discussed above, the choice of the cell factory and matching the desired product to the metabolic makeup of the cell factory are the key challenges for developing bio-based production. The efforts in this direction started with large screening initiatives, focused on finding potential cell factories in environmental samples from the Red Sea. The first study that compared Red Sea lagoon microbiomes in terms of diversity, taxonomy, and antimicrobial effects was finalized in 2016 (Al-Amoudi et al. 2016b). The study explored mangrove mud and the microbial mat sediments collected from the Rabigh harbor lagoon (RHL) and Al Kharrar lagoon (AKL) for antimicrobial bioprospecting. Results suggested that the mangrove mud samples are superior in terms of taxonomical abundance, species diversity, percentage of DNA sequences for enzymes associated with antibiotic synthesis, polyketide synthases (PKS), and nonribosomal peptide synthetases (NRPS), compared to microbial mat samples from salt marsh. Moreover, the antibiotic biosynthesis activity related to PKS or NRPS was higher in Firmicutes (Bacilli and Clostridia) compared to other phyla. Interesting conclusions could be drawn when correlating the community composition of the mangrove mud samples with hydrocarbon content. The samples from the non-industrialized AKL site show a shift in dominant phyla consistent with early hydrocarbon contamination exposure, similar to those reported for the Prestige oil spill metagenomic samples collected in 2004, which was dominated by Proteobacteria (primarily comprised of gamma- and delta-Proteobacteria) (Acosta-Gonzalez et al. 2013). The mangrove mud samples from the industrialized RHL site exhibit a shift in terms of dominant phyla consistent with late hydrocarbon contamination exposure, similar to the Prestige oil spill metagenomic samples collected in 2007 (Acosta-Gonzalez et al. 2013). The correlation to exposure to hydrocarbon contamination highlighted an interesting feature of the proportion of Firmicutes, which is highest in the pristine mangrove mud (Alzubaidy et al. 2016), followed by the AKL mangrove mud, and lowest in the RHL mangrove mud. This indicated that the more robust Firmicutes (Bacilli and Clostridia) with potential to produce secondary metabolites of interest can be cultured from the RHL mangrove mud samples.
To experimentally screen for the in silico detected potential for synthesis of antimicrobials, traditional culturing methods were applied (Al-Amoudi et al. 2016a). Screening the cultured strains for antimicrobial activity confirmed the in silico detected presence of PKS and NRPS, since most of the positive screening results were from Firmicutes (Al-Amoudi et al. 2016a). Moreover, 10 of the strains displayed zone inhibition against all three-indicator used pathogens, of which nine strains belong to the phylum Firmicutes, while one belongs to the phylum Proteobacteria. Since PKS and NRPS have been found to support synthesis of secondary metabolites that act as antibiotics, immunosuppressants, toxins, siderophores, or antitumor agents (Amoutzias et al. 2016), their presence increases chances of identifying organisms capable of producing the abovementioned bioactive secondary metabolites. For the 10 strains displaying zone inhibition against all three-indicator pathogens, PKS and/or NRPS gene sequences were found to be present in strains belonging to species Bacillus licheniformis, Bacillus vallismortis, B. subtilis, and Paenibacillus dendritiformis. The remaining strains (belonging to species Bacillus sonorensis, Brevibacillus borstelensis, and Aneurinibacillus migulanus) did not have identifiable PKS and/or NRPS genes and thus possibly harbor novel biosynthetic clusters with capacity to synthesize antibacterial compounds. Some of these species may very well serve as completely novel cell factory platforms in the future, where sea water can be used for low-cost bioproduction of bioactive compounds.
From the abovementioned samples, several amylase and lipase enzymes were identified in both the AKL and RHL metagenomic datasets; most of which were derived from Bacilli (Al-Amoudi et al. 2016b). Amylases and lipases are important industrial biocatalysts used in several industries that require thermostable enzymes suitable for starch degradation and production of glucose, maltose, and dextrose (Asgher et al. 2007; Gomes et al. 2003), as well as enzymes that remain active in industrial processes where concentrated salt solutions are used (Prakash et al. 2009). Halobacterial enzymes are found to be thermotolerant and stable at room temperature for extended periods (Mohapatra et al. 1998). Several thermostable α-amylase have been derived from Bacilli strains such as Bacillus stearothermophilus and B. licheniformis (used in starch processing industries) (Gomes et al. 2003), as well as halophilic amylases derived from Chromohalobacter sp. (Prakash et al. 2009), Halobacillus sp. (Amoozegar et al. 2003), Halomonas meridiana (Coronado et al. 2000), and Bacillus dipsosauri (Deutch 2002). Bacillus is also one of several microbial genera used for the commercial production of lipases (Aravindan et al. 2007). The search for thermostable lipases continues, and several such thermostable lipases have been isolated and characterized primarily from Bacilli (Kumar et al. 2014; Kumar et al. 2005; Castro-Ochoa et al. 2005). Owing to the extreme characteristics of these Red Sea lagoons, Bacilli strains from these environments could be expected to be extremely robust in other extreme environments, including high density production conditions, since they demonstrated tolerance in ecosystems exposed to hydrocarbon contamination. They could be expected to harbor the halophilic thermostable amylases and lipases required by industry as biocatalysts. The overall outcome of these screening initiatives suggests that the local Bacilli represent an important source of industrially relevant enzymes and new antimicrobials, and their development into cell factories could be a plausible route for bio-based production in the region.
Cyanobacteria: the potential to derive biomass from solar energy
The remaining important challenge in developing bio-based processes is the feedstock availability. As discussed above, with very limited arable land in the region calls imposes drastic restrictions on producing terrestrial plant biomass. Photosynthetic sea organisms should thus be a preferred choice. Cyanobacteria are very abundant photosynthetic bacteria, with a widely recognized potential to produce secondary metabolites and biofuels (Cassier-Chauvat et al. 2017). They have a complex metabolism, and the regulatory mechanisms that coordinate the light harvesting module with the biosynthetic modules have been extensively modeled in silico (Westermark and Steuer 2016). Diversity of hydrocarbons produced by Cyanobacteria in terms of chain length, degree of saturation, and variations of the carbon skeleton has been highlighted by Xie et al. (2017). Considerable efforts have been directed to metabolic engineering of Cyanobacteria, mainly geared towards biofuel production (Al-Haj et al. 2016; Oliver et al. 2016; Johnson et al. 2016; Gomaa et al. 2016). The major optimization strategies were directed towards improving carbon fixation (Atsumi et al. 2009), improving the capture of the light energy (Iwaki et al. 2006), and improving product extraction by the use of induced autolysis systems (Miyake et al. 2014).
With the global horizontal irradiance ranging between 5700 to 6700 Wh/m2, Saudi Arabia has one of the highest solar energy potentials on the planet. On the other hand, the scarcity of fertile soil limits the availability of plant biomass, which is the basic resource for this type of biotechnology worldwide. Cyanobacteria, with their capacity to capture solar energy and convert CO2 to sugars, and ultimately biomass, present a promising solution to bridge this gap. The major hurdle that has to be overcome is the relatively slow growth of Cyanobacteria, compounded by the fact that simple ad hoc strategies to improve product yield have been largely unsuccessful (Ruffing 2013; Liu et al. 2011; Oliver et al. 2016; Wang et al. 2013). To overcome this hurdle, more comprehensive metabolic optimization strategies are needed to guide the engineering of Cyanobacteria for increased growth rate and biomass production. The KAUST research program for developing new technologies for bio-based production has isolated a large number of Cyanobacterial species from the local environmental samples that show potential as producers of biomass. They can be potentially used for production or animal and fish feed, and those that have advantageous properties of lipid metabolism could be geared towards the production of biofuels. To facilitate the use of these isolates, KAUST has developed a computational framework to guide genome reduction of cyanobacterial strains with the aim of generating the so-called “clean” genomes that retain all genetic components necessary for the organism to survive and yet remain able to sustain production of desired chemicals. Additionally, the reduced genome is expected to have improved genome stability and possibly an improved growth rate. It should be noted that some Cyanobacteria possess small genomes but exhibit high ploidy level that is growth phase-regulated (Greise et al. 2011), and this should be taken into account when genome reduction is attempted. The key feature of this computational framework is that it guides genome reduction and does not require the availability of a sequenced genome of a closely related strain. Thus far, genomic islands and prophage components that could be eliminated from genomes of the strains from cyanobacterial genus Synechococcus have been identified (Bajic VB and Essack M, unpublished results). The same approach was applied to the Bacilli isolated from the Red Sea: Bacillus foraminis, B. licheniformis, Bacillus amyloliquefaciens, Bacillus niabensis, B. vallismortis, and Bacillus acidicola strain. The strategy chosen was inspired by Posfai et al. (2006) who demonstrated that the reduction of the E. coli K-12 MG1655 genome by ∼15% via genetic engineering (aimed to obtain the “clean” genome) achieved a 83% L-threonine overproduction compared to the wild-type strain.
Proof-of-concept studies exist for using Cyanobacteria as producers of biofuels (Lindberg et al. 2010; Oliver et al. 2013; Nozzi et al. 2013) or bioactive compounds (Singh et al. 2005; Essack et al. 2014; Singh et al. 2016; Humisto et al. 2016). However, the currently available engineered strains are not producing sufficient amounts of free fatty acids (FFA) to be commercially viable. Attempts have been made to commercialize ethanol production from Cyanobacteria, and some of these technologies have been patented by Algenol Biofuels and Joule Unlimited, reviewed by Dexter et al. (2015). The main challenge in this process has been the dilute rate of ethanol production, hampering the economic competitiveness of the process. Despite these difficulties, the US Environmental Protection Agency has approved a renewable fuel pathway developed by Joule Unlimited, allowing the company to commercialize biofuels using its Cyanobactyeria-derived ethanol (Voegele 2016).
In order to guide further improvement strategies, we exploited the availability of over 120 cyanobacterial genomes sequenced to-date, to establish a computational pipeline for evaluating their natural potential to produce and secrete FFA. Thus, we have developed an FFA SCreen (FFASC) tool, to evaluate potential for FFA production and secretion by cyanobacterial strains based on their theoretical proteomes (Motwalli et al. 2017). Our results strongly suggest that the top-ranked cyanobacterial strains that should be targeted for this purpose primarily include Prochlorococcus (order Prochlorales) and marine Synechococcus (order Chroococcales). Another interesting application of Cyanobacteria as cell factories is in the production of metabolites that are toxic to both terrestrial and aquatic invertebrates, and could serve as potential pesticides (Essack et al. 2014). Cyanobacterial genera we identified in this process as potential producers of pesticides include Lyngbya, Leptolyngbya, Phormidium, Nostoc, Microcystis, and Planktothrix. It is interesting to note that among the Cyanobacteria with top ranking as FFA producers, there are some nonphotosynthetic organisms. The cyanobacterial endosymbiont of Epithemia turgida, isolate EtSB Lake Yunoko (Nayakama et al. 2014) ranked at position 1, and Candidatus Atelocyanobacterium thalassa (isolate ALOHA) (Tripp et al. 2010) ranked at position 7. Both these strains do not have the necessary machinery to conduct photosynthesis due to some form of evolutionary metabolic streamlining. This streamlining could possibly have enhanced their ability to produce FFA, in a manner similar to reported genome reduction outcomes (Pósfai et al. 2006; Baumgart et al. 2013; Morimoto et al. 2008). Both these strains are symbionts of photosynthetic diatoms and algal strains that are generally known to produce FFA (Sharma et al. 2012). Potentially, these two organisms open different venues for engineering Cyanobacteria for FFA production, through a symbiotic combination of microorganisms. To resume, local Cyanobacteria have the potential to secure feedstock for bio-based production, and their metabolic makeup is especially suited for production of FFA, and possibly other types of biofuels. The response of different species of Cyanobacteria to high irradiation varies (Dillon et al. 2003), but there are production strains, such as Synechococcus sp., which are highly tolerant to high irradiation at atmospheric levels of CO2 (Bernstein et al. 2016). One of the major challenges in developing Cyanobacteria-based, non-sterilized outdoor cultivations will be possible contaminations with other microorganisms living in the Red Sea (Raitsos et al. 2013). Strategies have been developed to eliminate specific contaminants of cyanobacterial outdoor cultivations, such as the bicarbonate-based pH-rising strategy (Zhu et al. 2017). Along these lines, specific solutions will have to be developed to handle the local contaminants.
While they represent a very promising venue, Cyanobacteria are not the only possible route. High levels of sun radiation in the region could also be used to power solar panels to generate reducing power on large cathodic surfaces (Lovley and Nevin 2013). Solar energy could thus be used to power the production of various carbon compounds in non-photosynthetic bacteria (Liu et al. 2015; Sakimoto et al. 2016), thereby expanding the range of available cell factories.
Conclusions and perspectives
We have argued that the rapid expansion of bio-based production of fuels and chemicals by microbial cell factories is driven by the three major factors: (i) the versatility of microbes that can produce new molecules with improved properties compared with currently available ones, (ii) the ability to produce fuels and chemicals cheaper than the traditional chemical synthesis, and (iii) the opportunity to produce chemicals with a reduced environmental footprint. The Red Sea organisms, adapted for survival in a unique environmental niche, can be successfully exploited along all three of these axes. We have discussed the available results from the ongoing studies that clearly indicate that the bioprospecting in the Red Sea can deliver significant advances in terms of versatility of produced compounds. The tolerance of high salinity and the ability to perform photosynthesis in this highly irradiated area also provide a solid basis for reducing the cost of fermentation and the environmental footprint, be bypassing the need for an additional source of carbon, desalination or sterilization. The future progress should obviously focus on extensive marine bioprospecting based on metagenomics approaches (Kodzius and Gojobori 2015). Sample heterogeneity is a major issue when dealing with environmental omics, and single cell techniques for reducing sample heterogeneity are arguably the best way forward (Kodzius and Gojobori 2016). These experimental approaches should be followed by comprehensive in silico comparison of metabolic features of local species compared to their counterparts from other environments. This should be used to pin-point distinguishing features that could ear-mark new species for development of cell factories, or simply as “donors” of new pathways for metabolic engineering of existing cell factories. Efficient in silico tools for prioritizing among many available candidates species in the natural isolates are of paramount importance in driving this process. Finally, developing genetic tools for engineering the local species will be the final requirement on the way to establishing a competitive bio-based production in the region.
References
Abdallah RZ, Adel M, Ouf A, Sayed A, Ghazy MA, Alam I, Essack M, Lafi FF, Bajic VB, El-Dorry H, Siam R (2014) Aerobic methanotrophic communities at the Red Sea brine-seawater interface. Front Microbiol 5:487. doi:10.3389/fmicb.2014.00487
Abdelmohsen UR, Yang C, Horn H, Hajjar D, Ravasi T, Hentschel U (2014) Actinomycetes from Red Sea sponges: sources for chemical and phylogenetic diversity. Mar Drugs 12:2771–2789. doi:10.3390/md12052771
Acosta-Gonzalez A, Rossello-Mora R, Marques S (2013) Characterization of the anaerobic microbial community in oil-polluted subtidal sediments: aromatic biodegradation potential after the Prestige oil spill. Environ Microbiol 15:77–92. doi:10.1111/j.1462-2920.2012.02782.x
Alam I, Antunes A, Kamau AA, Ba Alawi W, Kalkatawi M, Stingl U, Bajic VB (2013) INDIGO–INtegrated Data Warehouse of MIcrobial GenOmes with examples from the Red Sea extremophiles. PLoS One 8:e82210. doi:10.1371/journal.pone.0082210
Al-Amoudi S, Essack M, Simões MF, Bougouffa S, Soloviev I, Archer JA, Lafi FF, Bajic VB (2016a) Bioprospecting Red Sea coastal ecosystems for culturable microorganisms and their antimicrobial potential. Mar Drugs 14:165. doi:10.3390/md14090165
Al-Amoudi S, Razali R, Essack M, Amini MS, Bougouffa S, Archer JA, Lafi FF, Bajic VB (2016b) Metagenomics as a preliminary screen for antimicrobial bioprospecting. Gene 594:248–258. doi:10.1016/j.gene.2016.09.021
Al-Haj L, Lui YT, Abed RM, Gomaa MA, Purton S (2016) Cyanobacteria as chassis for industrial biotechnology: progress and prospects. Life (Basel) 6:E42. doi:10.3390/life6040042
Alzubaidy H, Essack M, Malas TB, Bokhari A, Motwalli O, Kamanu FK, Jamhor SA, Mokhtar NA, Antunes A, Simões MF, Alam I, Bougouffa S, Lafi FF, Bajic VB, Archer JA (2016) Rhizosphere microbiome metagenomics of gray mangroves (Avicennia marina) in the Red Sea. Gene 576:626–636. doi:10.1016/j.gene.2015.10.032
Amoozegar M, Malekzadeh F, Malik KA (2003) Production of amylase by newly isolated moderate halophile, Halobacillus sp. strain MA-2. J Microbiol Methods 52:353–359. doi:10.1016/S0167-7012(02)00191-4
Amoutzias GD, Chaliotis A, Mossialos D (2016) Discovery strategies of bioactive compounds synthesized by nonribosomal peptide synthetases and type-I polyketide synthases derived from marine microbiomes. Mar Drugs 14:E80. doi:10.3390/md14040080
Antunes A, Alam I, Bajic VB, Stingl U (2011b) Genome sequence of Halorhabdus tiamatea, the first archaeon isolated from a deep-sea anoxic brine lake. J Bacteriol 193:4553–4554. doi:10.1128/JB.05462-11
Antunes A, Alam I, Bajic VB, Stingl U (2011c) Genome sequence of Salinisphaera shabanensis, a gammaproteobacterium from the harsh, variable environment of the brine-seawater interface of the Shaban Deep in the Red Sea. J Bacteriol 193:4555–4556. doi:10.1128/JB.05459-11
Antunes A, Alam I, El Dorry H, Siam R, Robertson A, Bajic VB, Stingl U (2011a) Genome sequence of Haloplasma contractile, an unusual contractile bacterium from a deep-sea anoxic brine lake. J Bacteriol 193:4551–4552. doi:10.1128/JB.05461-11
Antunes A, Alam I, Simões MF, Daniels C, Ferreira AJ, Siam R, El-Dorry H, Bajic VB (2015) First insights into the viral communities of the deep-sea anoxic brines of the Red Sea. Genomics Proteomics Bioinformatics 13:304–309. doi:10.1016/j.gpb.2015.06.004
Aravindan R, Anbumathi P, Viruthagiri T (2007) Lipase applications in food industry. Ind J Biotechnol (6):141–158
Asadollahi MA, Maury J, Patil KR, Schalk M, Clark A, Nielsen J (2009) Enhancing sesquiterpene production in Saccharomyces cerevisiae through in silico driven metabolic engineering. Metab Eng 11:328–334. doi:10.1016/j.ymben.2009.07.001
Asgher M, Javaid Asad M, Rahman SU, Legge RL (2007) A thermostable α-amylase from a moderately thermophilic Bacillus subtilis strain for starch processing. J Food Eng 79:950–955. doi:10.1016/j.jfoodeng.2005.12.053
Atsumi S, Higashide W, Liao JC (2009) Direct photosynthetic recycling of carbon dioxide to isobutyraldehide. Nat Biotechnol 27:1177–1180. doi:10.1038/nbt.1586
Baerends RJS, Simon E, Meyer JP, Vazquez CC (2014) A method for producing modified resveratrol. Google patents, WO2015028324 A3.
Basso LC, de Amorim HV, de Oliveira AJ, Lopes ML (2008) Yeast selection for fuel ethanol production in Brazil. FEMS Yeast Res 8:1155–1163. doi:10.1111/j.1567-1364.2008.00428.x
Baumgart M, Unthan S, Rückert C, Sivalingam J, Grünberger A, Kalinowski J, Bott M, Noack S, Frunzke J (2013) Construction of a prophage-free variant of Corynebacterium glutamicum ATCC 13032 for use as a platform strain for basic research and industrial biotechnology. Appl Environ Microbiol 79:6006–6015. doi:10.1128/AEM.01634-13
Bayer T, Neave MJ, Alsheikh-Hussain A, Aranda M, Yum LK, Mincer T, Hughen K, Apprill A, Voolstra CR (2013) The microbiome of the Red Sea coral Stylophora pistillata is dominated by tissue-associated Endozoicomonas bacteria. Appl Environ Microbiol 79:4759–4762. doi:10.1128/AEM.00695-13
Behzad H, Ibarra MA, Mineta K, Gojobori T (2016) Metagenomic studies of the Red Sea. Gene 576:717–723. doi:10.1016/j.gene.2015.10.034
Bernstein HC, McClure RS, Hill EA, Markillie LM, Chrisler WB, Romine MF, McDermott JE, Posewitz MC, Bryant DA, Konopka AE, Fredrickson JK, Beliaev AS (2016) Unlocking the constraints of cyanobacterial productivity: acclimations enabling ultrafast growth. MBio 7:e00949–e00916. doi:10.1128/mBio.00949-16
Bhaumik SR, Sonawat HM (1994) Pyruvate metabolism in Halobacterium salinarium studied by intracellular 13C nuclear magnetic resonance spectroscopy. J Bacteriol 176:2172–2176. doi:10.1128/jb.176.8.2172-2176.1994
Bougouffa S, Yang JK, Lee OO, Wang Y, Batang Z, Al-Suwailem A, Qian PY (2013) Distinctive microbial community structure in highly stratified deep-sea brine water columns. Appl Environ Microbiol 79:3425–3437. doi:10.1128/AEM.00254-13
Buijs NA, Zhou YJ, Siewers V, Nielsen J (2015) Long-chain alkane production by the yeast Saccharomyces cerevisiae. Biotechnol Bioeng 112:1275–1279. doi:10.1002/bit.25522
Burgard A, Burk MJ, Osterhout R, Van Dien S, Yim H (2016) Development of a commercial scale process for production of 1, 4-butanediol from sugar. Curr Opin Biotechnol 42:118–125. doi:10.1016/j.copbio.2016.04.016
Cassier-Chauvat C, Dive V, Chauvat F (2017) Cyanobacteria: photosynthetic factories combining biodiversity, radiation resistance, and genetics to facilitate drug discovery. Appl Microbiol Biotechnol 101:1359–1364. doi:10.1007/s00253-017-8105-z
Castro-Ochoa LD, Rodríguez-Gómez C, Valerio-Alfaro G, Ros RO (2005) Screening, purification and characterization of the thermoalkalophilic lipase produced by Bacillus thermoleovorans CCR11. Enzym Microb Technol 37:648–654. doi:10.1016/j.enzmictec.2005.06.003
Cavani F, Albonetti S, Basile F, Gandini A (2016) Chemicals and fuels from bio-based building blocks. Wiley Online Library. doi: 10.1002/9783527698202
Choi YJ, Lee SY (2013) Microbial production of short-chain alkanes. Nature 502:571–574. doi: 10.1038/nature12536
Coronado M, Vargas C, Hofemeister J, Ventosa A, Nieto JJ (2000) Production and biochemical characterization of an α-amylase from the moderate halophile Halomonas meridiana. FEMS Microbiol Lett 183:67–71. doi:10.1111/j.1574-6968.2000.tb08935.x
Crop Trust (2017) https://www.croptrust.org/country/saudi-arabia/. Accessed 20 Feb 2017.
Currie JN (1917) The citric acid fermentation of Aspergillus niger. J Biol Chem (31):15–37
Deutch C (2002) Characterization of a salt-tolerant extracellular α-amylase from Bacillus dipsosauri. Lett Appl Microbiol 35:78–84. doi:10.1046/j.1472-765X.2002.01142.x
Dexter J, Armshaw P, Sheahan C, Pembroke JT (2015) The state of autotrophic ethanol production in Cyanobacteria. J Appl Microbiol 119:11–24. doi:10.1111/jam.12821
Diaz-Torres M, Dunn-Coleman NS, Chase MW, Trimbur D (2000) Method for the recombinant production of 1, 3-propanediol. Google Patents, US6136576 A
DiBattista JD, Berumen ML, Gaither MR, Rocha LA, Eble JA, Choat JH, Craig MT, Skillings DJ, Bowen BW (2013) After continents divide: comparative phylogeography of reef fishes from the Red Sea and Indian Ocean. J Biogeogr 40:1170–1181. doi:10.1111/jbi.12068
Dillon JG, Miller SR, Castenholz RW (2003) UV-acclimation responses in natural populations of cyanobacteria (Calothrix sp.) Environ Microbiol 5:473–483. doi:10.1046/j.1462-2920.2003.00435.x
El Zoeiby A, Sanschagrin F, Havugimana PC, Garnier A, Levesque RC (2001) In vitro reconstruction of the biosynthetic pathway of peptidoglycan cytoplasmic precursor in Pseudomonas aeruginosa. FEMS Microbiol Lett 201:229–235. doi:10.1111/j.1574-6968.2001.tb10761.x
Emptage M, Haynie SL, Laffend LA, Pucci JP, Whited G (2003) Process for the biological production of 1, 3-propanediol with high titer. Google patents, US6514733 B1.
Erickson B, Hessler CJ (2004) New biotech tools for a cleaner environment. Biotechnology Industry Organization. https://www.bio.org/sites/default/files/files/CleanerExecSumm.pdf. Accessed 20 Feb 2017
Essack M, Alzubaidy HS, Bajic VB, Archer JA (2014) Chemical compounds toxic to invertebrates isolated from marine cyanobacteria of potential relevance to the agricultural industry. Toxins (Basel) 6:3058–3076. doi:10.3390/toxins6113058
Fleming A (1944) The discovery of penicillin. Br Med Bull (2):4–5
Foo JL, Susanto AV, Keasling JD, Leong SS, Chang MW (2017) Whole-cell biocatalytic and de novo production of alkanes from free fatty acids in Saccharomyces cerevisiae. Biotechnol Bioeng 114:232–237. doi:10.1002/bit.25920
Galanie S, Thodey K, Trenchard IJ, Filsinger Interrante M, Smolke CD (2015) Complete biosynthesis of opioids in yeast. Science 349:1095–1100. doi:10.1126/science.aac9373
Gao ZM, Wang Y, Tian RM, Lee OO, Wong YH, Batang ZB, Al-Suwailem A, Lafi FF, Bajic VB, Qian PY (2015) Pyrosequencing revealed shifts of prokaryotic communities between healthy and disease-like tissues of the Red Sea sponge Crella cyathophora. PeerJ 3:e890. doi:10.7717/peerj.890
Gao ZM, Wang Y, Tian RM, Wong YH, Batang ZB, Al-Suwailem AM, Bajic VB, Qian PY (2014) Symbiotic adaptation drives genome streamlining of the cyanobacterial sponge symbiont “Candidatus Synechococcus spongiarum”. MBio 5:e00079–e00014. doi:10.1128/mBio.00079-14
Gomaa MA, Al-Haj L, Abed RM (2016) Metabolic engineering of Cyanobacteria and microalgae for enhanced production of biofuels and high-value products. J Appl Microbiol 121:919–931. doi:10.1111/jam.13232
Gomes I, Gomes J, Steiner W (2003) Highly thermostable amylase and pullulanase of the extreme thermophilic eubacterium Rhodothermus marinus: production and partial characterization. Bioresour Technol 90:207–214. doi:10.1016/S0960-8524(03)00110-X
Grötzinger SW, Alam I, Ba Alawi W, Bajic VB, Stingl U, Eppinger J (2014) Mining a database of single amplified genomes from Red Sea brine pool extremophiles—improving reliability of gene function prediction using a profile and pattern matching algorithm (PPMA). Front Microbiol 5:134. doi:10.3389/fmicb.2014.00134
Hartmann M (2010) Bioamber commissions world’s first renewable succinic acid plant. https://www.bio-amber.com/bioamber/en/news/2010/bioamber-commissions-worlds-first-renewable-succinic-acid-plant/423. Accessed 20 Feb 2017
Hong K-K, Nielsen J (2012) Metabolic engineering of Saccharomyces cerevisiae: a key cell factory platform for future biorefineries. Cell Mol Life Sci 69:2671–2690. doi:10.1007/s00018-012-0945-1
Humisto A, Herfindal L, Jokela J, Karkman A, Bjørnstad R, Choudhury RR, Sivonen K (2016) Cyanobacteria as a source for novel anti-leukemic compounds. Curr Pharm Biotechnol 17:78–91. doi:10.2174/1389201016666150826121124
Iwaki T, Haranoh K, Inoue N, Kojima K, Satoh R, Nishino T, Wada S, Ihara H, Tsuyama S, Kobayashi H, Wadano A (2006) Expression of foreign type I ribulose-1,5-bisphosphate carboxylase/ oxygenase (EC 4.1.1.39) stimulates photosynthesis in cyanobacterium Synechococcus PCC7942 cells. Photosynth Res 88:287–297. doi:10.1007/s11120-006-9048-x
Jimenez-Infante F, Ngugi DK, Alam I, Rashid M, Baalawi W, Kamau AA, Bajic VB, Stingl U (2014) Genomic differentiation among two strains of the PS1 clade isolated from geographically separated marine habitats. FEMS Microbiol Ecol 89:181–197. doi:10.1111/1574-6941.12348
Jimenez-Infante F, Ngugi DK, Vinu M, Alam I, Kamau AA, Blom J, Bajic VB, Stingl U (2016) Comprehensive genomic analyses of the OM43 clade, including a novel species from the Red Sea, indicate ecotype differentiation among marine methylotrophs. Appl Environ Microbiol 82:1215–1226. doi:10.1128/AEM.02852-15
Johnson TJ, Gibbons JL, Gu L, Zhou R, Gibbons WR (2016) Molecular genetic improvements of cyanobacteria to enhance the industrial potential of the microbe: a review. Biotechnol Prog 32:1357–1371. doi:10.1002/btpr.2358
Kamanda Ngugi D, Blom J, Alam I, Rashid M, Ba-Alawi W, Zhang G, Hikmawan T, Guan Y, Antunes A, Siam R, El Dorry H, Bajic V, Stingl U (2015) Comparative genomics reveals adaptations of a halotolerant thaumarchaeon in the interfaces of brine pools in the Red Sea. ISME J 9:396–411. doi:10.1038/ismej.2014.137
Kang M-K, Nielsen J (2016) Biobased production of alkanes and alkenes through metabolic engineering of microorganisms. J Ind Microbiol Biotechnol. doi:10.1007/s10295-016-1814-y
Khandeparker R, Verma P, Deobagkar D (2011) A novel halotolerant xylanase from marine isolate Bacillus subtilis cho40: gene cloning and sequencing. New Biotechnol 28:814–821. doi:10.1016/j.nbt.2011.08.001
Kodzius R, Gojobori T (2015) Marine metagenomics as a source for bioprospecting. Mar Genomics 24:21–30. doi:10.1016/j.margen.2015.07.001
Kodzius R, Gojobori T (2016) Single-cell technologies in environmental omics. Gene 576:701–707. doi:10.1016/j.gene.2015.10.031
Kumar D, Parshad R, Gupta VK (2014) Application of a statistically enhanced, novel, organic solvent stable lipase from Bacillus safensis DVL-43. Int J Biol Macromol 66:97–107. doi:10.1016/j.ijbiomac.2014.02.015
Kumar S, Kikon K, Upadhyay A, Kanwar SS, Gupta R (2005) Production, purification, and characterization of lipase from thermophilic and alkaliphilic Bacillus coagulans BTS-3. Protein Expr Purif 41:38–44. doi:10.1016/j.pep.2004.12.010
Ledesma-Amaro R, Serrano-Amatriain C, Jiménez A, Revuelta JL (2015) Metabolic engineering of riboflavin production in Ashbya gossypii through pathway optimization. Microb Cell Factories 14:163. doi:10.1186/s12934-015-0354-x
Li M, Kildegaard KR, Chen Y, Rodriguez A, Borodina I, Nielsen J (2015) De novo production of resveratrol from glucose or ethanol by engineered Saccharomyces cerevisiae. Metab Eng 32:1–11. doi:10.1016/j.ymben.2015.08.007
Li S, Wen J, Jia X (2011) Engineering Bacillus subtilis for isobutanol production by heterologous Ehrlich pathway construction and the biosynthetic 2-ketoisovalerate precursor pathway overexpression. Appl Microbiol Biotechnol 91:577–589. doi:10.1007/s00253-011-3280-9
Lindberg P, Park S, Melis A (2010) Engineering a platform for photosynthetic isoprene production in cyanobacteria, using Synechocystis as the model organism. Metab Eng 12:70–79. doi:10.1016/j.ymben.2009.10.001
Liu C, Gallagher JJ, Sakimoto KK, Nichols EM, Chang CJ, Chang MC, Yang P (2015) Nano Lett 15:3634–3649. doi:10.1021/acs.nanolett.5b01254
Liu X, Sheng J, Curtiss R 3rd (2011) Fatty acid production in genetically modified cyanobacteria. Proc Natl Acad Sci U S A 108:6899–6904. doi:10.1073/pnas.1103014108
Lovley DR, Nevin KP (2013) Electrobiocommodities: powering microbial production of fuels and commodity chemicals from carbon dioxide with electricity. Curr Opin Biotechnol 24(3):385–390
Lunt J (1998) Large-scale production, properties and commercial applications of polylactic acid polymers. Polym Degrad Stab 59:145–152. doi:10.1016/S0141-3910(97)00148-1
Matsushika A, Inoue H, Kodaki T, Sawayama S (2009) Ethanol production from xylose in engineered Saccharomyces cerevisiae strains: current state and perspectives. Appl Microbiol Biotechnol 84:37–53. doi:10.1007/s00253-009-2101-x
Mei YZ, Liu RX, Wang DP, Wang X, Dai CC (2015) Biocatalysis and biotransformation of resveratrol in microorganisms. Biotechnol Lett 37:9–18. doi:10.1007/s10529-014-1651-x
Miyake K, Abe K, Ferri S, Nakajima M, Nakamura M, Yoshida W, Kojima K, Ikebukuro K, Sode K (2014) A green-light inducible lytic system for cyanobacterial cells. Biotechnol Biofuels 7:56. doi:10.1186/1754-6834-7-56
Mohapatra B, Banerjee U, Bapuji M (1998) Characterization of a fungal amylase from Mucor sp. associated with the marine sponge Spirastrella sp. J Biotechnol 60:113–117. doi:10.1016/S0168-1656(97)00197-1
Moitinho-Silva L, Seridi L, Ryu T, Voolstra CR, Ravasi T, Hentschel U (2014) Revealing microbial functional activities in the Red Sea sponge Stylissa carteri by metatranscriptomics. Environ Microbiol 16:3683–3698. doi:10.1111/1462-2920.12533
Morimoto T, Kadoya R, Endo K, Tohata M, Sawada K, Liu S, Ozawa T, Kodama T, Kakeshita H, Kageyama Y, Manabe K, Kanaya S, Ara K, Ozaki K, Ogasawara N (2008) Enhanced recombinant protein productivity by genome reduction in Bacillus subtilis. DNA Res 15:73–81. doi:10.1093/dnares/dsn002
Motwalli O, Essack M, Jankovic BR, Ji B, Liu X, Ansari HR, Hoehndorf R, Gao X, Arold ST, Mineta K, Archer JA, Gojobori T, Mijakovic I, Bajic VB (2017) BMC Genomics 18:33. doi:10.1186/s12864-016-3389-4
Mwirichia R, Alam I, Rashid M, Vinu M, Ba-Alawi W, Anthony Kamau A, Kamanda Ngugi D, Göker M, Klenk HP, Bajic V, Stingl U (2016) Metabolic traits of an uncultured archaeal lineage-MSBL1-from brine pools of the Red Sea. Sci Rep 6:19181. doi:10.1038/srep19181
Nakamura CE, Whited GM (2003) Metabolic engineering for the microbial production of 1, 3-propanediol. Curr Opin Biotechnol 14:454–459. doi:10.1016/j.copbio.2003.08.005
NatureWorks LLC (2005) NatureWorks develops PLA market in China. Plastics Additives & Compounding. http://docslide.us/documents/natureworks-develops-pla-market-in-china.html. Accessed 20 Feb 2017
Nielsen J (2013) Production of biopharmaceutical proteins by yeast: advances through metabolic engineering. Bioengineered 4:207–211. doi:10.4161/bioe.22856
Nielsen J, Keasling JD (2016) Engineering cellular metabolism. Cell 164:1185–1197. doi:10.1016/j.cell.2016.02.004
Nozzi NE, Oliver JW, Atsumi S (2013) Cyanobacteria as a platform for biofuel production. Front Bioeng Biotechnol 1:7. doi:10.3389/fbioe.2013.00007
Oliver JW, Machado IM, Yoneda H, Atsumi S (2013) Cyanobacterial conversion of carbon dioxide to 2,3-butanediol. Proc Natl Acad Sci U S A 110:1249–1254. doi:10.1073/pnas.1213024110
Oliver NJ, Rabinovitch-Deere CA, Carroll AL, Nozzi NE, Case AE, Atsumi S (2016) Cyanobacterial metabolic engineering for biofuel and chemical production. Curr Opin Chem Biol 35:43–50. doi:10.1016/j.cbpa.2016.08.023
Paddon CJ, Westfall PJ, Pitera DJ, Benjamin K, Fisher K, McPhee D, Leavell MD, Tai A, Main A, Eng D, Polichuk DR, Teoh KH, Reed DW, Treynor T, Lenihan J, Fleck M, Bajad S, Dang G, Dengrove D, Diola D, Dorin G, Ellens KW, Fickes S, Galazzo J, Gaucher SP, Geistlinger T, Henry R, Hepp M, Horning T, Iqbal T, Jiang H, Kizer L, Lieu B, Melis D, Moss N, Regentin R, Secrest S, Tsuruta H, Vazquez R, Westblade LF, Xu L, Yu M, Zhang Y, Zhao L, Lievense J, Covello PS, Keasling JD, Reiling KK, Renninger NS, Newman JD (2013) High-level semi-synthetic production of the potent antimalarial artemisinin. Nature 496:528–532. doi:10.1038/nature12051
Papagianni M (2007) Advances in citric acid fermentation by Aspergillus niger: biochemical aspects, membrane transport and modeling. Biotechnol Adv 25:244–263. doi:10.1016/j.biotechadv.2007.01.002
Pósfai G, Plunkett G 3rd, Fehér T, Frisch D, Keil GM, Umenhoffer K, Kolisnychenko V, Stahl B, Sharma SS, de Arruda M, Burland V, Harcum SW, Blattner FR (2006) Emergent properties of reduced-genome Escherichia coli. Science 312:1044–1046. doi:10.1126/science.1126439
Prakash B, Vidyasagar M, Madhukumar MS, Muralikrishna G, Sreeramulu K (2009) Production, purification, and characterization of two extremely halotolerant, thermostable, and alkali-stable α-amylases from Chromohalobacter sp. TVSP 101. Process Biochem 44:210–215. doi:10.1016/j.procbio.2008.10.013
Qian PY, Wang Y, Lee OO, Lau SC, Yang J, Lafi FF, Al-Suwailem A, Wong TY (2011) Vertical stratification of microbial communities in the Red Sea revealed by 16S rDNA pyrosequencing. ISME J 5:507–518. doi:10.1038/ismej.2010.112
Raitsos DE, Pradhan Y, Brewin RJ, Stenchikov G, Hoteit I (2013) Remote sensing the phytoplankton seasonal succession of the Red Sea. PLoS One 8:e64909. doi:10.1371/journal.pone.0064909
Ritter SK (2003) Green rewards. Chem Eng News 81:30–35. doi:10.1021/cen-v081n026.p030
Ro DK, Ouellet M, Paradise EM, Burd H, Eng D, Paddon CJ, Newman JD, Keasling JD (2008) Induction of multiple pleiotropic drug resistance genes in yeast engineered to produce an increased level of anti-malarial drug precursor, artemisinic acid. BMC Biotechnol 8:83. doi:10.1186/1472-6750-8-83
Ro DK, Paradise EM, Ouellet M, Fisher KJ, Newman KL, Ndungu JM, Ho KA, Eachus RA, Ham TS, Kirby J, Chang MC, Withers ST, Shiba Y, Sarpong R, Keasling JD (2006) Production of the antimalarial drug precursor artemisinic acid in engineered yeast. Nature 440:940–943. doi:10.1038/nature04640
Ruffing AM (2013) RNA-Seq analysis and targeted mutagenesis for improved free fatty acid production in an engineered cyanobacterium. Biotechnol Biofuels 6:113. doi:10.1186/1754-6834-6-113
Rugbjerg P, Naesby M, Mortensen UH, Frandsen RJ (2013) Reconstruction of the biosynthetic pathway for the core fungal polyketide scaffold rubrofusarin in Saccharomyces cerevisiae. Microb Cell Factories 12:31. doi:10.1186/1475-2859-12-31
Rush B (2012) Turning a novel yeast into a platform host for industrial production of fuels and chemicals. Engineering Conferences International, Metabolic Engineering IX. http://dc.engconfintl.org/cgi/viewcontent.cgi?article=1004&context=metabolic_ix. Accessed 20 Feb 2017
Sagar S, Esau L, Hikmawan T, Antunes A, Holtermann K, Stingl U, Bajic VB, Kaur M (2013a) Cytotoxic and apoptotic evaluations of marine bacteria isolated from brine-seawater interface of the Red Sea. BMC Complement Altern Med 13:29. doi:10.1186/1472-6882-13-29
Sagar S, Esau L, Holtermann K, Hikmawan T, Zhang G, Stingl U, Bajic VB, Kaur M (2013b) Induction of apoptosis in cancer cell lines by the Red Sea brine pool bacterial extracts. BMC Complement Altern Med 13:344. doi:10.1186/1472-6882-13-344
Sakimoto KK, Wong AB, Yang P (2016) Self-photosensitization of nonphotosynthetic bacteria for solar-to-chemical production. Science 351:74–77. doi:10.1126/science.aad3317
Sayed A, Ghazy MA, Ferreira AJ, Setubal JC, Chambergo FS, Ouf A, Adel M, Dawe AS, Archer JA, Bajic VB, Siam R, El-Dorry H (2014) A novel mercuric reductase from the unique deep brine environment of Atlantis II in the Red Sea. J Biol Chem 289:1675–1687. doi:10.1074/jbc.M113.493429
Schalk M, Clark A (2007) Sesquiterpene synthases and methods of use. 2007, Google patents, EP3109319 A1
Shahzad K, Kettl K-H, Titz M, Koller M, Schnitzer H, Narodoslawsky M (2013) Comparison of ecological footprint for biobased PHA production from animal residues utilizing different energy resources. Clean Technol Envir 15:525–536. doi:10.1007/s10098-013-0608-4
Sharma KK, Schuhmann H, Schenk PM (2012) High lipid induction in microalgae for biodiesel production. Energies 5:1532–1553. doi:10.3390/en5051532
Siam R, Mustafa GA, Sharaf H, Moustafa A, Ramadan AR, Antunes A, Bajic VB, Stingl U, Marsis NG, Coolen MJ, Sogin M, Ferreira AJ, Dorry HE (2012) Unique prokaryotic consortia in geochemically distinct sediments from Red Sea Atlantis II and discovery deep brine pools. PLoS One 7:e42872. doi:10.1371/journal.pone.0042872
Simões MF, Antunes A, Ottoni CA, Amini MS, Alam I, Alzubaidy H, Mokhtar NA, Archer JA, Bajic VB (2015) Soil and rhizosphere associated fungi in gray mangroves (Avicennia marina) from the Red Sea—a metagenomic approach. Genomics Proteomics Bioinformatics 13:310–320. doi:10.1016/j.gpb.2015.07.002
Singh JS, Kumar A, Rai AN, Singh DP (2016) Cyanobacteria: a precious bio-resource in agriculture, ecosystem, and environmental sustainability. Front Microbiol 7:529. doi:10.3389/fmicb.2016.00529
Singh S, Kate BN, Banerjee UC (2005) Bioactive compounds from cyanobacteria and microalgae: an overview. Crit Rev Biotechnol 25:73–95. doi:10.1080/07388550500248498
Smits HP, David H, Forster J, Stenhuus B (2011) Recovery of stilbenoids. Google patents, US20110086399 A1
Song HT, Liu SH, Gao Y, Yang YM, Xiao WJ, Xia WC, Liu ZL, Li R, Ma XD, Jiang ZB (2016) Simultaneous saccharification and fermentation of corncobs with genetically modified Saccharomyces cerevisiae and characterization of their microstructure during hydrolysis. Bioengineered 7:198–204. doi:10.1080/21655979.2016.1178424
Sun Y, Hahn F, Demydchuk Y, Chettle J, Tosin M, Osada H, Leadlay PF (2010) In vitro reconstruction of tetronate RK-682 biosynthesis. Nat Chem Biol 6:99–101. doi:10.1038/nchembio.285
Szczebara FM, Chandelier C, Villeret C, Masurel A, Bourot S, Duport C, Blanchard S, Groisillier A, Testet E, Costaglioli P, Cauet G, Degryse E, Balbuena D, Winter J, Achstetter T, Spagnoli R, Pompon D, Dumas B (2003) Total biosynthesis of hydrocortisone from a simple carbon source in yeast. Nat Biotechnol 21:143–149. doi:10.1038/nbt775
Thompson LR, Field C, Romanuk T, Ngugi D, Siam R, El Dorry H, Stingl U (2013) Patterns of ecological specialization among microbial populations in the Red Sea and diverse oligotrophic marine environments. Ecol Evol 3:1780–1797. doi:10.1002/ece3.593
Tian RM, Wang Y, Bougouffa S, Gao ZM, Cai L, Bajic V, Qian PY (2014) Genomic analysis reveals versatile heterotrophic capacity of a potentially symbiotic sulfur-oxidizing bacterium in sponge. Environ Microbiol 16:3548–3561. doi:10.1111/1462-2920.12586
Tippmann S, Scalcinati G, Siewers V, Nielsen J (2016) Production of farnesene and santalene by Saccharomyces cerevisiae using fed-batch cultivations with rq-controlled feed. Biotechnol Bioeng 113:72–81. doi:10.1002/bit.25683
Tripp HJ, Bench SR, Turk KA, Foster RA, Desany BA, Niazi F, Affourtit JP, Zehr JP (2010) Metabolic streamlining in an open-ocean nitrogen-fixing cyanobacterium. Nature 464:90–94. doi:10.1038/nature08786
Tsuruta H, Paddon CJ, Eng D, Lenihan JR, Horning T, Anthony LC, Regentin R, Keasling JD, Renninger NS (2009) Newman JD (2009) high-level production of amorpha-4, 11-diene, a precursor of the antimalarial agent artemisinin, in Escherichia coli. PLoS One 4:e4489. doi:10.1371/journal.pone.0004489
Voegele E (2016) Biomass Magazine. http://biomassmagazine.com/articles/13155/epa-approves-jouleundefineds-advanced-biofuel-pathway. Accessed 22 Apr 2017
Wang PM, Zheng DQ, Liu TZ, Tao XL, Feng MG, Min H, Jiang XH, Wu XC (2012) The combination of glycerol metabolic engineering and drug resistance marker-aided genome shuffling to improve very-high-gravity fermentation performances of industrial Saccharomyces cerevisiae. Bioresour Technol 108:203–210. doi:10.1016/j.biortech.2011.12.147
Wang B, Pugh S, Nielsen DR, Zhang W, Meldrum DR (2013) Engineering cyanobacteria for photosynthetic production of 3-hydroxybutyrate directly from CO2. Metab Eng 16:68–77. doi:10.1016/j.ymben.2013.01.001
Weizmann C (1915) Improvements in the bacterial fermentation of carbohydrates and in bacterial cultures for the same. British patent 4845
Westermark S, Steuer R (2016) Toward multiscale models of cyanobacterial growth: a modular approach. Front Bioeng Biotechnol 4:95. doi:10.3389/fbioe.2016.00095
Westfall PJ, Pitera DJ, Lenihan JR, Eng D, Woolard FX, Regentin R, Horning T, Tsuruta H, Melis DJ, Owens A, Fickes S, Diola D, Benjamin KR, Keasling JD, Leavell MD, McPhee DJ, Renninger NS, Newman JD, Paddon CJ (2012) Production of amorphadiene in yeast, and its conversion to dihydroartemisinic acid, precursor to the antimalarial agent artemisinin. Proc Natl Acad Sci U S A 109:E111–E118. doi:10.1073/pnas.1110740109
WHO, World Malaria Report 2015. 2016.
Xin L, Hui-Ying Y (2013) Purification and characterization of an extracellular esterase with organic solvent tolerance from a halotolerant isolate, Salimicrobium sp. LY19. BMC Biotechnol 13:108. doi:10.1186/1472-6750-13-108
Xu G, Liu L, Chen J (2012) Reconstruction of cytosolic fumaric acid biosynthetic pathways in Saccharomyces cerevisiae. Microb Cell Factories 11:24. doi:10.1186/1475-2859-11-24
Yim H, Haselbeck R, Niu W, Pujol-Baxley C, Burgard A, Boldt J, Khandurina J, Trawick JD, Osterhout RE, Stephen R, Estadilla J, Teisan S, Schreyer HB, Andrae S, Yang TH, Lee SY, Burk MJ, Van Dien S (2011) Metabolic engineering of Escherichia coli for direct production of 1, 4-butanediol. Nat Chem Biol 7:445–452. doi:10.1038/nchembio.580
Yu HY, Li X (2014) Characterization of an organic solvent-tolerant thermostable glucoamylase from a halophilic isolate, Halolactibacillus sp. SK71 and its application in raw starch hydrolysis for bioethanol production. Biotechnol Prog 30:1262–1268. doi:10.1002/btpr.1978
Zafar S (2017) Bioenergy Consult. http://www.bioenergyconsult.com/tag/saudi-arabia/. Accessed 20 Feb 2017
Zhang W, Wang Y, Bougouffa S, Tian R, Cao H, Li Y, Cai L, Wong YH, Zhang G, Zhou G, Zhang X, Bajic VB, Al-Suwailem A, Qian PY (2015) Synchronized dynamics of bacterial niche-specific functions during biofilm development in a cold seep brine pool. Environ Microbiol 17:4089–4104. doi:10.1111/1462-2920.12978
Zhou YJ, Buijs NA, Zhu Z, Qin J, Siewers V, Nielsen J (2016) Production of fatty acid-derived oleochemicals and biofuels by synthetic yeast cell factories. Nat Commun 7:11709. doi:10.1038/ncomms11709
Zhu Z, Luan G, Tan X, Zhang H, Lu X (2017) Rescuing ethanol photosynthetic production of cyanobacteria in non-sterilized outdoor cultivations with a bicarbonate-based pH-rising strategy. Biotechnol Biofuels 10:93. doi:10.1186/s13068-017-0765-5
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Funding
We acknowledge funding from the Novo Nordisk Foundation (to JN and IM), the Knut and Alice Wallenberg Foundation (to JN) and Vetenskapsrådet (to JN), the King Abdullah University of Science and Technology (KAUST) Office of Sponsored Research (OSR) under Awards No URF/1/2302 and No URF/1/1976-02, and KAUST Base Research Fund (BAS/1/1606-01-01) to VBB.
Conflict of interest
The authors declare that they have no conflict of interest.
Ethical approval
This article does not contain any studies with animals performed by any of the authors.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Nielsen, J., Archer, J., Essack, M. et al. Building a bio-based industry in the Middle East through harnessing the potential of the Red Sea biodiversity. Appl Microbiol Biotechnol 101, 4837–4851 (2017). https://doi.org/10.1007/s00253-017-8310-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00253-017-8310-9