Abstract
Fabrics of Cambrian sedimentary dykes formed in Proterozoic granites of the Västervik area (Southeast Sweden) evidence repeated opening/filling and mineralisation/cementation events under varying conditions. Diagnostic features include (1) wall-parallel boundaries between epiclastic fillings and (2) early formed dyke sediments that appear as lithoclasts in subsequently formed sedimentary fillings. The psammitic components mostly consist of well-rounded quartz grains related to a coastal environment and fragments from the granitic host rock. Platy calcitic fragments embedded in the epiclastic matrix originally formed as microveins within already-lithified dyke sediments and the adjacent host rock. Convex downward-pointing, internal sagging structures, together with the preferred orientation of compositional boundaries and long axes of grains/rock fragments parallel to the dyke walls, are interpreted as the result of suction-controlled flow of unconsolidated fillings during episodes of downward dyke growth. Pressure solution of quartz grains are evidence of extensional phases with dyke propagation that were interrupted by phases of horizontal compression normal to the dyke walls. The N–S and NE–SW striking sedimentary dykes formed by opening of a pre-existing joint set during NW–SE oriented rifting during the Cambrian.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Sedimentary dykes in crystalline basement rocks have been described from different areas of the Baltic shield (e.g. Bergman 1982; Carlson and Holmquist 1968; Katzung and Obst 1997). They have been interpreted to be of Cambrian age, although only a few fillings could be dated by fossils, which give the maximum age of fissure formation (e.g. Tynni 1982). The age of dyke emplacement is generally accepted to be the age of the feeder bed (Röshoff and Cosgrove 2002). Several mechanisms of the formation of sedimentary dykes have been attributed to the dynamic environment and the physical properties of the host rocks (Röshoff and Cosgrove 2002). Most frequent are neptunain dykes which form by injection of soft sediments caused by pore pressure gradients (e.g. Smart et al. 1988; Winterer et al. 1991; Phillips and Alsop 2000; André et al. 2004; Stanton and Pray 2004; Levi et al. 2006; Heubeck 2009). In contrast, sedimentary dykes in crystalline basement which were formed by downward fracture opening and filled with siliciclastic material supplied from the surface are rarely described (e.g. Beacom et al. 1999).
Geological mapping at the scale of 1:10,000, has been carried out in the Paleoproterozoic of the Västervik area (Southeast Sweden) by diploma students from the Geoscience Centre of the Georg-August-University of Göttingen (Germany). They have discovered several outcrops, where sedimentary dykes cut granitoids (Fig. 1). A compilation of further locations concentrated along the coastline, south of Västervik, is given by Alm and Sundblad (2002). With respect to the study area around Västervik, sedimentary dykes have only been described in detail so far from one locality (Carlson and Holmquist 1968), whereas the related microfabrics have only been discussed briefly. According to their strike, the dykes of the Västervik area can be divided into two sets (N–S and NE–SW striking, Fig. 1e), all of which are steeply inclined. Their thicknesses range between 2 and 10 cm, and are rather constant throughout the outcrop (maximum height of 6 m). For the estimation of the original vertical extension of the dykes, post-Cambrian erosion of several tens of metres has to be taken in account (mainly by the Quaternary glacial erosion). Cross-cutting relationships between the two dyke directions have not been observed. Since there are only vertical outcrop sections, possible strike-slip components could not be observed.
Detailed information about the evolutionary history of comparable sedimentary dykes based on comprehensive fabric analysis could not be found in the literature. The present study focuses on the macro- and microfabrics, which show a complex polyphase dyke formation under varying conditions and stress configurations, and hence contributes to the inferred geodynamic situation of SE Sweden in Cambrian times. The samples for this study were collected at a road cut on the E22, approximately 2.5 km NE′ of the village Gunnebo (Fig. 1b, c).
Geological setting
The study area around Västervik is part of the transition zone between the Svecofennian domain to the north and the Transscandinavian Igneous Belt (TIB) to the south (Fig. 1a). Beunk and Page (2001) proposed a back-arc environment for this crustal segment, which formed in response to Paleoproterozoic, northward-directed subduction beneath the Oskarshamn-Jönköping Belt (OJB; Fig. 1a), approximately 100 km to the south (Mansfeld et al. 2005).
Remnants of this back-arc basin are represented by the so-called Västervik formation, which mainly consists of metamorphic siliciclastics with intercalated basic flows and sills. The whole sequence was deposited between 1.88 and 1.85 Ga (U/Pb ages of detrital zircons) in a continental margin environment (Sultan et al. 2005; Sultan and Plink-Björklund 2006).
Due to continued subduction, this back-arc basin closed and the Västervik formation was strongly deformed in a dextral transpressional regime associated with metamorphism under high-temperature/low-pressure conditions. Syn- to postkinematic intrusion of various generations of granitoids occurred between 1.85 and 1.65 Ga (Åhäll and Larson 2000; Nolte et al. 2008), which represent the southernmost part of the now-exposed TIB. This basement was deeply eroded by extensive lithospheric uplift and erosion during the late Proterozoic and probably Lower Paleozoic. At that time Baltica was affected by NW–SE extension with respect to the present geographic directions (e.g. Murnier and Talbot 1993; Cocks and Torsvik 2005). On the resultant peneplain, Lower Paleozoic platform sediments of several hundred metres thickness were deposited. This cover was eroded during the Mesozoic and, to a minor amount during the Quaternary by glacial erosion, even below the Cambrian unconformity (Lidmar-Bergström 1997). As a consequence, Cambrian sedimentary dykes, which formed within the Paleoproterozoic granitoids, were exposed.
Macrofabrics
The steeply inclined dykes display rather constant widths throughout the outcrop of between 2 and 10 cm (Fig. 2). Dyke filling contacts with the granitic wall rock are sharp and planar (Fig. 2a, c, d). The dyke filling consists mainly of layers of sandstone with well-rounded quartz grains alternating with bands of sandy pelites (Fig. 2b). The boundaries between these two main lithological types are diffuse, slightly undulating and mostly sub-parallel to the dyke walls (Fig. 2c, e). Locally, the boundaries are sinusoidal curved with the convex arc pointing downwards (Fig. 2b). In a few cases, fragments of earlier formed and at least partly lithified sedimentary fillings were observed in zones of younger fillings (Fig. 2c). Some sections of the dykes contain larger amounts of angular fragments of the granitic wall rock which are preferentially oriented with their long axis sub-parallel to the dyke boundaries (Fig. 2d). Smaller fragments of the wall rock occur mainly as reddish feldspar grains. A third component is represented by greyish platy calcitic grains which are accumulated in narrow wall-parallel zones in which individual plates are likewise preferentially oriented with their long axes parallel to the dyke walls (Fig. 2e). The platy calcitic grains are up to 2-cm long and 3-mm thick. These aligned plates seem to delineate boundaries between vein fillings of different composition. In the adjacent wall rock, similar carbonate plates of the same size appear as mineralisation in the form of en-echelon arranged (micro) veins (Fig. 2e). Corresponding veins are also observed in lithoclasts of the granitic wall rock (Fig. 2d).
Microfabrics
Thin sections of the sedimentary dyke were analysed with an optical microscope in plane and crossed polarised light. Carbonate veins were studied in addition with a “hot-cathode” cathodoluminescence (CL) microscope (HC3-LM apparatus; Neuser et al. 1995; Pagel et al. 2000) to investigate the in situ formed fabrics of the calcite plates. Thin sections were cut normal to the strike of the dykes. Additional observations for three-dimensional interpretations were made on corresponding hand specimens.
Detrital components
The psammitic components are predominated by well-rounded monocrystalline quartz grains (Fig. 3a). The grains are mostly of plutonic type, indicated by dark blue cathodoluminescence colours (Fig. 3b) and lack intragranular deformation structures. A contribution of vein quartz is questionable because grains displaying a diagnostic growth zoning by CL were not observed. A few non-luminescent grains may be derived from low-temperature mineralisation in a diagenetic environment, probably from older Cambrian or Precambrian sandstones deposited in other areas. Other indications of sedimentary source rocks are completely lacking.
Only a very few monocrystalline quartz grains show angular shapes (Fig. 3c), which indicates fracturing shortly before or during deposition into the dyke. Polycrystalline quartz grains (Fig. 3d) are less frequent and display a wide range of crystal sizes and different shapes of internal grain boundaries, which both probably strongly depend on the angle of intersection. These components may have been mostly supplied from the Västervik formation where metaquartzites with a corresponding variety of microfabrics occur (Vollbrecht and Leiss 2008). In rare cases, smaller grains of quartzitic mylonites with distinct textures (lattice-preferred orientations, Fig. 3e) and coherent micro breccias (cataclasites; Fig. 3f) were observed.
A second group of detrital components is represented by angular or weakly rounded feldspars which are probably derived from granitic rocks in the vicinity or the immediate wall rock. Potassium feldspars are less common, but larger in size, and often display a hypidiomorphic shape with thin perthitic exolution lamellae and diagenetic overgrowth zones. Microcline is abundant with typical cross-twinning, showing only minor alteration, in contrast to plagioclase grains that are often strongly altered to sericite (Fig. 3g). Occasionally, larger flakes of brown biotite were observed in quartz/feldspar-rich fabric domains (Fig. 3h), as well as in the pelitic matrix. Zircon, rutile and apatite are the main accessory components.
With the exception of fragments from the granitic wall rock (see above), polymineralic components, for example, metaarkoses (Fig. 3i) or micaschists (Fig. 3j) are comparatively rare. Platy grains of calcite are regarded as fragments of microveins (details see below), which are mixed with the siliciclastic detrital material during later dyke opening and filling steps.
In situ formed fabrics and mineralisations
In the following, basic in situ processes are inferred from microfabrics and mineralisations which are later interpreted in terms of a model of episodic dyke formation.
Mechanical compaction by grain rotation associated with micro-fragmentation was one of the early processes in the unconsolidated sediment. Fragmentation affected quartz grains in primarily porous or clay-rich domains, where rotation of grains or fragments was possible. These domains are best documented by pockets of angular, well-fitting quartz fragments which display a similar crystallographic orientation (Fig. 4a).
In domains of early calcite cementation, mechanical compaction was prevented, indicated by the predominance of point contacts between quartz grains (Fig. 3a). Pressure solution as a second early process is documented by a significant number of quartz grains, which display concavo-convex or sutured boundaries (Fig. 4b, c), particularly in fabric domains poor in pelitic matrix. These boundaries preferentially show subvertical orientations (Fig. 4b) and hence could be related to phases, in which tensional stresses responsible for dyke propagation switched to subhorizontal compressive stresses acting normal to the dyke walls. A corresponding body rotation of elongated grains prior to pressure solution may have contributed to a shape-preferred orientation parallel to the dyke walls, in addition to the previously mentioned dyke-parallel mud-supported flow. Dissolved silica was probably the source for early formed quartz cement which is, due to later replacement by calcite (see below), only preserved as relics (Fig. 4d). Part of the dissolved silica precipitated as cryptocrystalline quartz within the fine-grained pelitic matrix.
In contact with quartz, part of the previously mentioned detrital K-feldspar grains was also affected by pressure solution (Fig. 4e). Precipitation of the dissolved material probably contributed to authigenic overgrowth on potassium feldspars in adjacent strain shadow areas or via mass transfer over longer distance on grains in other fabric domains (Fig. 4f). Corresponding potassium feldspars often display two zones of authigenic overgrowth separated by a dull rim (Fig. 4g). The fact that potassium feldspars with authigenic overgrowth also appear as displaced angular fragments within the matrix (Fig. 4h) is another clear sign of a polyphase dyke formation.
Domains primarily poor in pelitic matrix are filled with sparry to microcrystalline calcite cement, which partly replaced marginal zones of detrital quartz grains and also earlier formed quartz cement (Fig. 5a). In rare cases two generations of sparry calcite cement are clearly discernable (Fig. 5b). Locally, transitions between microcrystalline cement and blocky calcite microveins in quartz were observed (Fig. 5c). The formation of the calcite veins must have affected the already solidified clastic dyke filling because vein propagation occurred not only along grain boundaries but also transgranular, for example by cross-cutting detrital grains of quartz and feldspar (Fig. 5d). Cathodoluminescence colours reveal a distinct growth zonation of individual calcite crystals within sealed microveins (Fig. 5e). This implies a free crystal growth into open fissures associated with an episodic variation in fluid influx during calcite cementation. Moreover, the incorporation of elongated clasts of the wall rock (i.e. of the solidified sedimentary dyke) indicates that the considered calcite veins partly formed by repeated crack-sealing. Another evidence for a comparatively late formation of calcite microveins is that they crosscut the overgrowth rims of potassium feldspars (Fig. 5f).
In patches with higher clay content quartz grains occasionally display a strong pseudomorphic replacement by sparry calcite with conservation of the original rounded grain shape (Fig. 5g). This kind of replacement preferentially affected polycrystalline quartz grains along their boundaries, while monocrystalline grains are mostly preserved.
According to EDX analysis (Jacke 2000, see data in electronic repository), the matrix is mainly composed of microcrystalline aggregates of sericite/illite, chlorite and probably cryptocrystalline quartz, in which larger, in situ formed flakes of chlorite are embedded. Locally, these phyllosillicates display an orthogonal shape fabric symmetrically oriented to the dyke walls (Fig. 6a), particularly in domains with low content of coarse-grained detritus. Larger flakes of chlorite or strongly altered detrital biotite are partly crenulated or marginally delaminated between hard components like quartz or feldspar (Fig. 6b), which indicates mechanical compaction.
Single crystals or aggregates of euhedral to subhedral pyrite represent another in situ formed phase (Fig. 6c). Occasionally, the aggregates are elongated and outline the previously described, steeply inclined boundaries between different generations of detrital fillings. This may indicate that these compositional interfaces served as migration pathways for fluids.
In general, the significant in situ processes comprise soft sediment flow in association with mechanical compaction by grain rotation and micro-fragmentation, pressure solution and re-precipitation, formation of microveins, authigenesis and overgrowth (cementation) partly associated with replacement of pre-existing phases. Primarily variations in composition and porosity, spatiotemporally variations in flow of different pore fluids and local stress heterogeneities caused a heterogeneous distribution of different microfabric domains. Hence, a complete sequence of the dyke-forming processes cannot be reconstructed unequivocally because unambiguous age relationships were established only for restricted fabric domains and hence might not be valid for all the dyke fillings.
Interpretation: tectonic situation and episodic dyke formation
The investigated dykes can be used as small-scale indicators for the determination of the remote far-field stress pattern (Dunne and Hancock 1994), because a topographic or thermal control on the stress field can be excluded for this tectonic setting. According to their strike directions, the dyke formation could be related to a NW–SE directed rifting, which affected Baltica during Early to Middle Cambrian (Fig. 7), and represented the latest stages of the break-up of the Precambrian supercontinent (e.g. Murnier and Talbot 1993; Hartz and Torsvik 2002; Cocks and Torsvik 2005). This timing agrees with the paleogeographic reconstructions by Hagenfeldt (1989; see below). The simultaneous development of two sets of dykes was initially controlled by pre-existing subvertical joint sets (Fig. 1d), both oriented at obtuse angle to the supposed rifting direction. However, taking other regions of Baltica into account, the strike directions of comparable sedimentary dykes of Cambrian age cannot be attributed to this stress field (e.g. Katzung and Obst 1997; dykes on Bornholm island strike 120–125°; Fig. 1e). It follows from comparisons of Fig. 1d and e that at regional scale all pre-existing steep joints were opened to form sedimentary dykes. This could be explained by a radial extensional regime due to a crustal up-doming, as described by e.g. Marco et al. (2002) for sedimentary dykes above a domal salt structure. Another possible explanation for additional dyke directions could be stress re-orientations in the vicinity of faults. Other extensional structures like normal faults, which can be clearly correlated to the opening direction of the sedimentary dykes, have not been observed.
The described sedimentary dykes were only observed in granitic rocks and not in the Proterozoic metasediments of the Västervik formation. One probable explanation for this is that within the metasediments the built-up of critical stress values necessary for dyke formation was prevented due to episodic stress relief by layer-parallel slip. The predominance of moderate to steep inclinations of the metasedimentary strata would be favourable for this process.
As described, K-feldspar displays zones of overgrowth which are later on replaced by calcite. For authigenic feldspar to occur, alkaline pore waters rich in Na+ or K+ are necessary to convert aluminosilicates in the sediment to feldspar during shallow burial (Kastner and Siever 1979; Tucker 2001). Flehmig (1977) states that both the presence of alkali and silica in seawater are sufficient for feldspar and quartz to form, even during the deposition of sediments. Together with the predominance of well-rounded quartz grains, the formation of the sedimentary dykes can be attributed to a coastal environment which agrees with paleogeographic reconstructions of Hagenfeldt (1989). Clearly, only soft sediments were supplied from the surface, since (exotic) sandstone fragments, which could not be derived from older, already lithified dyke sediments, are lacking.
The following describes a sequence of events which might have occurred repeatedly until individual dykes attained their final dimensions (Fig. 8):
-
1.
Pre-existing joint formed by coalescence of microcracks during the early cooling and uplift history of the granite in a differential stress field (e.g. Nadan and Engelder 2009 and references therein).
-
2.
Lateral extension of joint and downward propagation of fracture. Simultaneous filling with wall rock fragments, detrital grains and mud from the surface.
-
3.
Further downward fracture propagation caused a suction effect leading to a downward flow of the unconsolidated fillings and reorientation of elongated components and compositional boundaries (sub-) parallel to the subvertical dyke walls. Initial stages are represented by convex-downward boundaries between fillings.
-
4.
Consolidation of fracture fillings due to combined mechanical compaction, pressure solution and precipitation of quartz or authigenesis of potassium feldspar (overgrowth), chlorite and pyrite. Horizontal compression normal to the dyke wall occurred at least temporarily during this consolidation phase.
-
5.
Formation of sub-vertical calcite microveins by calcite cementation in fractures through already lithified dyke fillings and the adjacent wall rock. Growth zoning indicates that calcite mineralisation occurred into open fissures. The absence of sediment input may reflect a lack of detritus supply from the surface or that these fissures formed in subsurface levels. Quartz cement and detrital quartz were partly replaced by calcite.
-
6.
Phase of dyke opening transecting already indurated sediments. The newly introduced epiclastic sediments incorporated clasts of the partly fragmented lithified dyke sediments, together with platy fragments of the calcite veins.
-
7.
Progressive downward dyke propagation and related subsidence of the latest sediment fillings, which caused a boudinage-like stretching and strong preferred orientation of the platy calcite fragments parallel to the dyke walls.
Conclusions
A closer look to the macro- and microfabrics of sedimentary dykes has revealed a multistage origin due to repeated fracture propagation under varying conditions. This may also imply that dyke formation lasted over a long time span with alternating periods of opening/filling, cementation/lithification and alteration. Taken the results as a whole, a model of passive gravitational infill with unconsolidated sediment from the surface, associated with suction processes due to episodic downward dyke propagation is favoured, rather than injection under high fluid pressure as has been discussed for other sedimentary dykes in Southeast Sweden. Pressure solution of quartz and crenulation of phyllosilicates shows that extensional phases were interrupted by phases of horizontal compression normal to the dyke wall. The orientation of the sedimentary dykes agrees with the regional stress field during the Cambrian. The formation of two sets of dykes was controlled by pre-existing sets of joints, which were in suitable orientation to the extensional stress direction. Further analyses of the dyke-forming processes could yield indications for the hosting environment and hence could help to reconstruct the paleogeographic situation and regional tectonics.
References
Åhäll KI, Larson SÅ (2000) Growth related 1.85–1.55 Ga magmatism in the Baltic shield; a review addressing to tectonic characteristics of Svecofennian, TIB 1-related, and Gothian events. Geol Fören Stockh Förh 122:193–206
Alm E, Sundblad K (2002) Fluorite-calcite-galena-bearing fractures in the counties of Kalmar and Blekinge. SKB Rapport R-02-42, Swedish Nuclear Fuel and Waste Management Co, Stockholm, Sweden
André G, Hibsch C, Beaudoin B, Carpentier C, Fourcade S, Cathelineau M, Élion P (2004) Oxfordian sedimentary dykes: tectonic and diagenetic implications for the eastern Paris basin. Bull Soc Geol Fr 175:595–605 (in French with English abstract)
Beacom LE, Anderson TB, Holdsworth RE (1999) Using basement-hosted clastic dykes as syn-rifting palaeostress indicators: an example from the basal Stoer Group, northwest Scotland. Geol Mag 136:301–310
Bergman L (1982) Clastic dikes in the Åland Islands, SW Finland and their origin. In: Bergman L, Tynni R, Winterhalter B (eds) Palaeozoic sediments in the Rapakivi area of the Åland Islands. Bulletin of the Geological Society of Finland, vol 317, pp 8–32
Beunk FF, Page LM (2001) Structural evolution of the accretional continental margin of the Paleoproterozoic Svecofennian orogen in southern Sweden. Tectonophysics 339:67–92
Carlson L, Holmquist A (1968) Ett nytt fynd av sanstengångar i Västervikstrakten. Geol Fören Stockh Förh 90:519–528
Cocks LRM, Torsvik TH (2005) Baltica from the Late Precambrian to mid-Palaeozoic times: the gain and loss of a terrene’s identity. Earth Sci Rev 72:39–66
Dunne WM, Hancock PL (1994) Palaeostress analysis of small-scale brittle structures. In: Hancock PL (ed) Continental deformation. Pergamon Press, Oxford, pp 101–120
Flehmig W (1977) The synthesis of feldspar at temperatures between 0–80°C, their ordering behaviour and twinning. Contrib Mineral Petrol 65:1–9
Frei M (1997) Mittelproterozoische Magmatite und Metamorphite des Transskandinavischen Magmatit-Gürtels, SW′Västrum, S′Västervik, SE Schweden. Diploma mapping thesis, University of Göttingen, Germany
Hagenfeldt SE (1989) Lower and Middle Cambrian acritarchs from the Baltic Depression and south-central Sweden taxonomy, stratigraphy and palaeographic reconstruction. Ph.D. thesis, University of Stockholm, Stockholm, Sweden, 32 pp
Hartz EH, Torsvik TH (2002) Baltica upside down: a new plate tectonic model for Rodinia and the Iapetus Ocean. Geology 30:255–258
Heubeck C (2009) Gravel-filled dikes of the Eisenach Formation (Oberrotliegend, Early Permian): modified artesian injections at the base of alluvial fans? Z Dtsch Ges Geowiss 160:41–56 (in German with English abstract)
Jacke O (2000) Petrographie und Gefüge von Sedimentgängen im Granit der Västervik-Region/SE-Schweden. Diploma thesis, University of Göttingen, Göttingen, Germany
Kastner M, Siever R (1979) Low temperature feldspar in sedimentary rocks. Am J Sci 279:435–479
Katzung G, Obst K (1997) The sandstone dyke swarm of Vang, Bornholm (Denmark). Bull Geol Soc Den 44:161–171
Larsson K (1975) Clastic dikes from the Burgsvik Beds of Gotland. Geol Fören Stockh Förh 97:125–134
Levi T, Weinberger R, AÏfa T, Eyal Y, Marco S (2006) Earthquake-induced clastic dikes detected by anisotropy of magmatic susceptibility. Geology 34:69–72
Lidmar-Bergström K (1997) A long-term perspective of glacial erosion. Earth Surf Process Landf 22:297–306
Lundegårdh PH, Wikström A, Bruun Å (1985) Provisoriska översiktliga Berggrundskartan Oskarshamn. Sveriges Geologiska Undersökning Ba34
Mansfeld J, Beunk FF, Barling J (2005) 1.83–1.82 Ga formation of a juvenile volcanic arc-implications from U–Pb and Sm–Nd analyses of the Oskarshamn-Jönköping Belt, southeastern Sweden. Geol Fören Stockh Förh 127:149–157
Marco S, Weinberger R, Agnon A (2002) Radial clastic dykes by salt diapir in the Dead Sea Rift, Israel. Terra Nova 14:288–294
Murnier R, Talbot CJ (1993) Segmentation, fragmentation, and jostling of cratonic basement in and near Äspo, Southeast Sweden. Tectonics 12:713–727
Nadan BJ, Engelder T (2009) Microcracks in New England granitoids: a record of thermoelastic relaxation during exhumation of intracontinental crust. Geol Soc Am Bull 121:80–99
Neuser RD, Bruhn F, Habermann D, Richter DK (1995) Kathodolumineszenz: Methodik und Anwendung. Zbl Geol Paläont I 1(2):287–306
Nolte N, Kleinhans IC, Bäro W, Hansen BT (2008) An evolutionary model of 1,8 Ga granitoids of the Västervik area (SE Sweden) based on a refined geological map. 86th Annual meeting of the German Mineralogical Society, DMG, Berlin, September 14–17 2008, Abstract S07-275
Pagel M, Barbin V, Blanc P, Ohnstetter D (2000) Cathodoluminescence in geosciences. Springer, Berlin
Phillips CA, Alsop GI (2000) Post-tectonic clastic dykes in the Dalradian of Scotland and Ireland: implications for delayed lithification and deformation of sediments. Geol J 35:99–110
Röshoff K, Cosgrove J (2002) Sedimentary dykes in the Oskarshamn-Västervik area—a study of the mechanisms of formation. SKB Rapport R-02-37, Swedish Nuclear Fuel and Waste Management Co, Stockholm, Sweden
Rudolph S (1995) Mittelproterozoische Magmatite des “Transscandinavian Granite-Porphyry Belt” E′Adriansnäs, Västervikgebiet, SE Schweden. Diploma mapping thesis, University of Göttinge,Germany
Smart PL, Palmer RJ, Whitaker F, Wright VP (1988) Neptunian dikes and fissure fills: an overview and account of some modern examples. In: James NP, Choquette PW (eds) Paleokarst. Springer, New York, pp 149–163
Stanton RJ, Pray LC (2004) Skeletal-carbonate neptunian dikes of the Capitan Reef: Permian, Guadalupe Mountains, Texas, USA. J Sediment Res 74:805–816
Sultan L, Plink-Björklund P (2006) Depositional environments at a Palaeoproterozoic continental margin, Västervik Basin, SE Sweden. Precambrian Res 145:243–271
Sultan L, Claesson S, Plink-Björklund P (2005) Proterozoic and Archean ages of detrital zircon from the Paleoproterozoic Västervik Basin, SE Sweden: implications for provenance and timing of deposition. Geol Fören Stockh Förh 127:17–24
Tucker ME (2001) Sedimentary petrology, 3rd edn. Blackwell Science, London
Tynni R (1982) On palaeozoic microfossils in clastic dykes in the Åland Islands and in the core samples of Lumparn. In: Bergman L, Tynni R, Winterhalter B (eds) Palaeozoic sediments in the Rapakivi area of the Åland Islands. Bulletin of the Geological Society of Finland, vol 317, pp 35–114
Vollbrecht A, Leiss B (2008) Complex fabric development in Paleoproterozoic metaquartzites of the Västervik Basin, SE Sweden. Geol Fören Stockh Förh 130:41–45
Weidemann M (2008) Structural geology analyses of dykes in the Götemar pluton and its bedrock. Bachelor of Science thesis, University of Göttingen, Germany
Weiss T (1994) Mittelproterozoische Magmatite im “Transscandinavian Fold Belt” S′Blankaholm, SE Schweden. Diploma mapping thesis, University of Göttingen, Germany
Winterer EL, Metzler CV, Sarti M (1991) Neptunain dykes and associated breccias (southern Alps, Italy and Switzerland): role of gravity sliding in open and closed systems. Sedimentology 38:381–404
Acknowledgments
The authors gratefully acknowledge helpful discussions with colleagues from the Geoscience Centre of the Georg-August-University of Göttingen. The authors are grateful to Sven Egenhoff and an anonymous reviewer for their constructive comments on the manuscript. We thank David C. Tanner for revising the English.
Open Access
This article is distributed under the terms of the Creative Commons Attribution Noncommercial License which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
Open Access This is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License (https://creativecommons.org/licenses/by-nc/2.0), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
About this article
Cite this article
Friese, N., Vollbrecht, A., Leiss, B. et al. Cambrian sedimentary dykes in the Proterozoic basement of the Västervik area (southeast Sweden): episodic formation inferred from macro- and microfabrics. Int J Earth Sci (Geol Rundsch) 100, 741–752 (2011). https://doi.org/10.1007/s00531-009-0508-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00531-009-0508-3