Abstract
Fracture matrix transfer functions have long been recognized as tools in modelling naturally fractured reservoirs. If a significant degree of fracturing is present, models involving single matrix blocks and matrix block distributions become relevant. However, this captures only the largest fracture sets and treats the matrix blocks as homogeneous, though possibly anisotropic. Herein, we produce the steady and transient baseline solutions for depletion for such models. Multiscale models pass below grid scale information to the larger scale system with some numerical cost. Instead, for below block scale information, we take the analytic solution to the Diffusivity Equation for transient inflow performance of wells of arbitrary trajectory, originally developed for Neumann boundary conditions, and recast it for Dirichlet boundaries with possible internal fractures of variable density, length, and orientation. As such, it represents the analytical solution for a heterogeneous matrix block surrounded by a constant pressure sink, we take to be the primary fracture system. Instead of using a constant rate internal boundary condition on a fracture surrounded by matrix, we segment the fracture and, through imposed material balance, force the internal complex fracture feature to be a constant pressure element with net zero flux. In doing so, we create a representative matrix block with infinite conductivity subscale fractures that impact the overall drainage into the surrounding fracture system. We vary the internal fracture structure and delineate sensitivity to fracture spacing and extent of fracturing. We generate the complete transient solution, enabling new well test interpretation for such systems in characterization of block size distributions or extent of below block-scale fracturing. The initial model for fully-penetrating fractures can be extended to 3D, generalized floating fractures of arbitrary inclination, and internal complex fracture networks.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Chen, Z.X.: Transient flow of slightly compressible fluids through double-porosity, double-permeability systems-a state-of-the-art review. Transp. Porous Media. 4(2), 147–184 (1989)
Pruess, K., Narasimhan, T.N.: A practical method for modeling fluid and heat flow in fractured porous media. Soc. Pet. Eng. J. 25(1), 14–26 (1985)
Bosma, S.B.M., Hajibeygi, H., Tene, M., Tchelepi, H.A.: Multiscale finite volume method for discrete fracture modeling with unstructured grids (MS-DFM). J. Comput. Phys. 351, 145–164 (2017). https://doi.org/10.1016/j.jcp.2017.09.032
Xu, Y., Sepehrnoori, K.: Development of an embedded discrete fracture model for field-scale reservoir simulation with complex corner-point grids. Soc. Pet. Eng., August 1. 24, 1552–1575 (2019). https://doi.org/10.2118/195572-PA
Barenblatt, G.I., Zheltov, I.P., Kochina, I.N.: Basic concepts in the theory of seepage of homogeneous liquids in fissured rocks. J. Appl. Math. Mech. 24, 1286–1303 (1960). https://doi.org/10.1016/0021-8928(60)90107-6
Lshimoto, K.: Improved Matrix, Fracture fluid transfer function in dual porosity models. SPE 17599, presented at the SPE International Meeting on Petroleum Engineering, Tianjin, China, November 1–4 (1988)
Chang, M.: Deriving the Shape Factor of a Fractured Rock Matrix. Technical Report NIPER-696 (DE93000170). Bartlesville, Oklahoma: NIPER (1993)
Sarma, P.: New Transfer Functions for Simulation of Naturally Fractured Reservoirs with Dual Porosity Models, MS Thesis, Stanford University (2003)
Tellapaneni, P.K., Putra, E., Schechter, D.S.: Usage of x-ray CT for empirical transfer functions in dual porosity simulation. Paper 2004–246 presented at the Petroleum Society’s 5th Canadian International Petroleum Conference, Calgary, June 8–10 (2004)
Sarma, P., Aziz, K.: New transfer functions for simulation of naturally fractured reservoirs with dual porosity models. SPEJ (September). 11(03), 328–340 (2006)
Maier, C., Geiger, S.: Combining unstructured grids, discrete fracture representation and dual-porosity models for improved simulation of naturally fractured reservoirs. Soc. Pet. Eng., September 16. (2013). https://doi.org/10.2118/166049-MS
Belani, A.K., Jalali, Y.: Estimation of matrix block size distribution in naturally fractured reservoirs. Soc. Pet. Eng.. January 1. (1988). https://doi.org/10.2118/18171-MS
Gong, J., Rossen, W.R.: Shape factor for dual-permeability fractured reservoir simulation: effect of non-uniform flow in 2D fracture network. Fuel. 184, 81–88 (2016)
Amiry, M.T.: Modeling Flow Behavior in Naturally Fractured Reservoirs. PhD Dissertation, University of Leoben, Austria. (2014)
Hazlett, R.D., Babu, D.K.: Discrete wellbore and fracture productivity modeling for unconventional wells and unconventional reservoirs. SPEJ. 19(01), 19–33 (2014)
Hazlett, R.D., Babu, D.K.: Transient inflow performance modeling from analytic line source solutions for arbitrary trajectory wells. SPEJ. 23(3), 906–918 (2018). https://doi.org/10.2118/189463-PA
Hazlett, R.: Flux Characterization in heterogeneous transport problems by the boundary integral method. In: Constanda, C., et al. (eds.) Integral Methods in Science and Engineering, vol. 2, Chapter 12. Springer International Publishing (2017). https://doi.org/10.1007/978-3-319-59387-6_12
Carslaw, H.S., Jaegar, J.C.: Conduction of Heat in Solids. Oxford University Press, Oxford (1959)
Newman, A.B.: Heating and cooling rectangular and cylindrical solids. Ind. Eng. Chem. 28(5), 545–548 (1936)
McCann, R.C., Hazlett, R.D., Babu, D.K.: (2001, April) Highly accurate approximations of Green's and Neumann functions on rectangular domains. Proc. R. Soc. London A: Math. Phys. Eng. Sci. 457, 767–772 (2008)
Bao, A., Hazlett, R.D., Babu, D.K.: A discrete, arbitrarily oriented 3D plane-source analytical solution to the diffusivity equation for modeling reservoir fluid flow. SPEJ (May 1) 1–15. 22, 1609–1623 (2017). https://doi.org/10.2118/185180-PA
Gradshtein, I.S., Ryzhik, I.M.: Table of Integrals, Series, and Products. Academic Press, Amsterdam (1980)
Acknowledgments
This work was funded by Nazarbayev University Faculty Development Competitive Research Grant 17155628.
Availability of data and material
Available upon specific request.
Code availability
Unsupported.
Author information
Authors and Affiliations
Contributions
Hazlett primary development, computation, and manuscript development.
Younis consultation and editorial contribution.
MSC 52–08, 76S05, 31A10, 65 M80.
Corresponding author
Ethics declarations
Conflicts of interest/competing interests
None.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Hazlett, R.D., Younis, R. Multiscale matrix-fracture transfer functions for naturally fractured reservoirs using an analytical, infinite conductivity, discrete fracture model. Comput Geosci 26, 1011–1028 (2022). https://doi.org/10.1007/s10596-021-10109-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10596-021-10109-3