Abstract
To gain insight in relationships among capillary pressure, interfacial area, saturation, and relative permeability in two-phase flow in porous media, we have developed two types of pore-network models. The first one, called tube model, has only one element type, namely pore throats. The second one is a sphere-and-tube model with both pore bodies and pore throats. We have shown that the two models produce distinctly different curves for capillary pressure and relative permeability. In particular, we find that the tube model cannot reproduce hysteresis. We have investigated some basic issues such as effect of network size, network dimension, and different trapping assumptions in the two networks. We have also obtained curves of fluid–fluid interfacial area versus saturation. We show that the trend of relationship between interfacial area and saturation is largely influenced by trapping assumptions. Through simulating primary and scanning drainage and imbibition cycles, we have generated two surfaces fitted to capillary pressure, saturation, and interfacial area (P c –S w –a nw ) points as well as to relative permeability, saturation, and interfacial area (k r –S w –a nw ) points. The two fitted three-dimensional surfaces show very good correlation with the data points. We have fitted two different surfaces to P c –S w –a nw points for drainage and imbibition separately. The two surfaces do not completely coincide. But, their mean absolute difference decreases with increasing overlap in the statistical distributions of pore bodies and pore throats. We have shown that interfacial area can be considered as an essential variable for diminishing or eliminating the hysteresis observed in capillary pressure–saturation (P c –S w ) and the relative permeability–saturation (k r –S w ) curves.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Acharya, R.C., van der Zee, S.E.A.T.M., Leijnse, A.: Porosity–permeability properties generated with a new 2-parameter 3D hydraulic pore-network model for consolidated and unconsolidated porous media. Adv. Water Resour. 27, 707–723 (2004)
Al-Raoush, R.I., Willson, C.S.: Extraction of physically realistic pore network properties from three-dimensional synchrotron X-ray microtomography images of unconsolidated porous media systems. J. Hydrol. 300, 44–64 (2005a)
Al-Raoush, R.I., Willson, C.S.: A pore-scale investigation of a multiphase porous media system. J. Contam. Hydrol. 77, 67–89 (2005b)
Anwar, A.H.M.F., Bettahar, M., Matsubayashi, U.: A method for determining air–water interfacial area in variably saturated porous media. J. Contam. Hydrol. 43, 129–146 (2000)
Bear, J., Zaslavsky, D., Irmay, S.: Physical Principles of Water Percolation and Seepage. z.uitg, Paris (1968)
Blunt, M.J., Jackson, M.D., Piri, M., Valvatne, P.H.: Detailed physics, predictive capabilities and macroscopic consequences for pore-network models of multiphase flow. Adv. Water Resour. 25, 1069–1089 (2002)
Brusseau, M.L., Popovicova, J., Silva, J.A.K.: Characterizing gas–water interfacial and bulk-water partitioning for gas phase transport of organic contaminants in unsaturated porous media. Environ. Sci. Technol. 31, 1645–1649 (1997)
Brusseau, M.L., Peng, S., Schnaar, G., Constanza-Robinson, M.S.: Relationships among air–water interfacial area, capillary pressure, and water saturation for a sandy porous medium. Water Resour. Res. 42, W03501. doi:10.1029/2005WR004058 (2006)
Burganos, V.N., Payatakes A., C.: Knudsen diffusion in random and correlated networks of constricted pores. Chem. Eng. Sci. 47, 1383–1400 (1992)
Chen, L., Kibbey, T.C.G.: Measurement of air–water interfacial area for multiple hysteretic drainage curves in an unsaturated fine sand. Langmuir 22, 6874–6880 (2006)
Cheng, J.T., Pyrak-Nolte, L.J., Nolte, D.D.: Linking pressure and saturation through interfacial area in porous media, Geophys. Res. Lett. 31, L08502. doi:10.1029/2003GL019282 (2004)
Costanza-Robinson, M.S., Brusseau, M.L.: Air–water interfacial areas in unsaturated soils: evaluation of interfacial domains. Water Resour. Res. 38, 13–1 (2002)
Culligan, K.A., Wildenschild, D., Christensen, B.S.B., Gray, W.G., Rivers, M.L., Tompson, A.F.B.: Interfacial area measurements for unsaturated flow through a porous medium. Water Resour. Res. 40, W12413. doi:10.1029/2004WR003278 (2004)
Culligan, K.A., Wildenschild, D., Christensen, B.S.B., Gray, W., Rivers, M.L.: Pore-scale characteristics of multiphase flow in porous media: a comparison of air–water and oil–water experiments. Adv. Water Resour. 29, 227–238 (2006)
Dias, M.M., Payatakes, A.C.: Network models for two-phase flow in porous media, 2, motion of oil ganglia. J. Fluid Mech. 164, 337–358 (1986)
Fatt, I.: The network model of porous media. I. Capillary pressure characteristics. Pet. Trans. AIME 207, 144–159 (1956)
Gielen, T.W.J.: Upscaling Multiphase Transport Processes in Porous Media. Delft University of Technology (2007)
Hassanizadeh, S.M., Gray, W.G.: Mechanics and thermodynamics of multiphase flow in porous media including interface boundaries. Adv. Water Resour. 13, 169–186 (1990)
Hassanizadeh, S.M., Gray, W.G.: Thermodynamic basis of capillary pressure in porous media. Water Resour. Res. 29, 3389–3405 (1993a)
Hassanizadeh, S.M., Gray, W.G.: Toward an improved description of the physics of two-phase flow. Adv. Water Resour. 16, 53–67 (1993b)
Held, R.J., Celia, M.A.: Modeling support of functional relationships between capillary pressure, saturation, interfacial area and common lines. Adv. Water Resour. 24, 325–343 (2001)
Helland, J.O., Skjaeveland, S.M.: The relationship between capillary pressure, saturation and interfacial area from a model of mixed-wet triangular tubes. Water Resour. Res. 43, W12S10. doi:10.1029/2006WR005698 (2007)
Hui, M.H., Blunt, M.J.: Pore-scale modeling of three-phase flow and the effects of wettability, 2000SPE/DOE improved oil recovery symposium, Tulsa, Oklahoma, 3–5 April (2000)
Karkare, M.V., Fort, T.: Determination of the air–water interfacial area in wet “unsaturated” porous media. Langmuir 12, 2041–4044 (1996)
Kim, H., Rao, P.S.C., Annable, M.D.: Determination of effective air–water interfacial area in partially saturated porous media using surfactant adsorption. Water Resour. Res. 33, 2705–2711 (1997)
Kim, H., Rao, P.S.C., Annable, M.D.: Gaseous tracer technique for estimating air–water interfacial areas and interface mobility. Soil Sci. Soc. Am. J. 63, 1554–1560 (1999)
Mahmud, W.M., Nguyen, V.H.: Effects of snap-off in imbibition in porous media with different spatial correlations. Transp. Porous Med. 64, 279–300 (2006)
Montemagno, C.D., Gray, W.G.: Photoluminescent volumetric imaging: a technique for the exploration of multi-phase flow and transport in porous media. Geophys. Res. Lett. 22, 425–428 (1995)
Piri, M., Blunt, M.J.: Three-dimensional mixed-wet random pore-scale network modeling of two- and three-phase flow in porous media, I. Model description. Phy. Rev. E71, 026301 (2005)
Reeves, P.C.: Development of porescale network model for the simulation of capillary pressure, saturation, interfacial area, relative permeability in multi-fluid porous media, PhD Thesis, Princeton University (1997)
Reeves, P.C., Celia, M.A.: A functional relationship between capillary pressure, saturation, and interfacial area as revealed by a pore-scale network model. Water Resour. Res. 32, 2345–2358 (1996)
Saripalli, K.P., Rao, P.S.C., Annable, M.D.: Determination of specific NAPL—water interfacial areas of residual NAPLs in porous media using the interfacial tracers technique. J. Contam. Hydrogeol. 30, 375–391 (1998)
Schaefer, C.E., Dicarlo, D.A., Blunt, M.J.: Experimental measurement of air–water interfacial area during gravity drainage and secondary imbibition in porous media. Water Resour. Res. 36, 885–890 (2000)
Schnaar, G., Brusseau, M.L.: Pore-scale characterization of organic immiscible-liquid morphology in natural porous media using synchrotron X-ray microtomography. Environ. Sci. Technol. 39, 8403–8410 (2005)
Schnaar, G., Brusseau, M.L.: Characterizing pore-scale configuration of organic immiscible liquid in multi-phase systems with synchrotron X-ray microtomography. Vadose Zone J. 5, 641–648 (2006)
Vogel, H.J.: Morphological determination of pore connectivity as a function of pore size using serial sections. Eur. J. Soil Sci. 48, 365–377 (1997)
Vogel, H.J.: A numerical experiment on pore size, pore connectivity, water retention, permeability, and solute transport using network models. Eur. J. Soil Sci. 51, 99–105 (2000)
Vogel, H.J., Roth, K.: A new approach for determining effective soil hydraulic functions. Eur. J. Soil Sci. 49, 547–556 (1998)
Wildenschild, D., Hopmans, J.W., Vaz, C.M.P., Rivers, M.L., Rikard, D.: Using X-ray computed tomography in hydrology: systems, resolutions, and limitations. J. Hydrol. 267, 285–297 (2002)
Open Access
This article is distributed under the terms of theCreative Commons AttributionNoncommercial License which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License (https://creativecommons.org/licenses/by-nc/2.0), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
About this article
Cite this article
Joekar-Niasar, V., Hassanizadeh, S.M. & Leijnse, A. Insights into the Relationships Among Capillary Pressure, Saturation, Interfacial Area and Relative Permeability Using Pore-Network Modeling. Transp Porous Med 74, 201–219 (2008). https://doi.org/10.1007/s11242-007-9191-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11242-007-9191-7