Abstract
The surface modification of multi-walled carbon nanotubes (MWCNTs) was carried out using plasma treatment. The microstructures of the prepared cermets with different additions of MWCNTs were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX), and X-ray diffraction (XRD). Mechanical properties such as transverse rupture strength (TRS), fracture toughness (KIC), and hardness (HRA) were measured. The results showed that some reactive groups were successfully modified on the surface of MWCNTs, resulting in the improvement of dispersibility. Most of the amorphous carbons and impurities were peeled from the MWCNTs. Increasing MWCNT addition decreased the dissolution of tungsten, titanium, and molybdenum in the binder phase. The cermet with 0.5 wt% MWCNT addition showed the highest TRS and fracture toughness. The strengthening mechanisms were attributed to the finer grain size, the homogeneous microstructure, and the higher volume fraction of binder phase in the binder. The toughening mechanisms were characterized by bridging and pulling-out.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Moskowitz D, Terner LL. TiN improves properties of titanium carbonitride-base materials. Int J Refract Met H 1986, 5: 13.
Ajayan PM, Schadler LS, Giannaris C, et al. Single-walled carbon nanotube–polymer composites: Strength and weakness. Adv Mater 2000, 12: 750–753.
Xie X-L, Mai Y-W, Zhou X-P. Dispersion and alignment of carbon nanotubes in polymer matrix: A review. Mat Sci Eng R 2005, 49: 89–112.
Zhou S, Zhang X, Ding Z, et al. Fabrication and tribological properties of carbon nanotubes reinforced Al composites prepared by pressureless infiltration technique. Composites Part A 2007, 38: 301–306.
Feng Y, Yuan HL, Zhang M. Fabrication and properties of silver-matrix composites reinforced by carbon nanotubes. Mater Charact 2005, 55: 211–218.
Zhan G-D, Kuntz JD, Wan J, et al. Single-wall carbon nanotubes as attractive toughening agents in alumina-based nanocomposites. Nat Mater 2003, 2: 38–42.
Wang X, Padture NP, Tanaka H. Contact-damage-resistant ceramic/single-wall carbon nanotubes and ceramic/graphite composites. Nat Mater 2004, 3: 539–544.
Duszová A, Dusza J, Tomášek K, et al. Microstructure and properties of carbon nanotube/zirconia composite. J Eur Ceram Soc 2008, 28: 1023–1027.
Ruoff RS, Lorents DC. Mechanical and thermal properties of carbon nanotubes. Carbon 1995, 33: 925–930.
Iijima S. Helical microtubules of graphitic carbon. Nature 1991, 354: 56–58.
Dalmas F, Chazeau L, Gauthier C, et al. Multiwalled carbon nanotube/polymer nanocomposites: Processing and properties. J Polym Sci Pol Phys 2005, 43: 1186–1197.
Bahr JL, Yang J, Kosynkin DV, et al. Functionalization of carbon nanotubes by electrochemical reduction of aryl diazonium salts: A bucky paper electrode. J Am Chem Soc 2001, 123: 6536–6542.
O’Connell MJ, Boul P, Ericson LM, et al. Reversible water-solubilization of single-walled carbon nanotubes by polymer wrapping. Chem Phys Lett 2001, 342: 265–271.
Kónya Z, Vesselenyi I, Niesz K, et al. Large scale production of short functionalized carbon nanotubes. Chem Phys Lett 2002, 360: 429–435.
Holländer A, Thome J, Keusgen M, et al. Polymer surface chemistry for biologically active materials. Appl Surf Sci 2004, 235: 145–150.
He P, Wang SD, Wong WK, et al. Vibrational analysis of oxygen-plasma treated indium tin oxide. Chem Phys Lett 2003, 370: 795–798.
He W, Guo Z, Pu Y, et al. Polymer coating on the surface of zirconia nanoparticles by inductively coupled plasma polymerization. Appl Phys Lett 2004, 85: 896–898.
Flashaut E, Peigney A, Laurent Ch, et al. Carbon nanotube–metal–oxide nanocomposites: Microstructure, electrical conductivity and mechanical proporities. Acta Mater 2000, 48: 3803–3812.
Bhaumik SK, Upadhyaya GS, Vaidya ML. Full density processing of complex WC-based cemented carbides. J Mater Process Tech 1996, 58: 45–52.
Shetty DK, Wright IG, Mincer PN, et al. Indentation fracture of WC–Co cermets. J Mater Sci 1985, 20: 1873–1882.
Xu T, Yang J, Liu J, et al. Surface modification of multi-walled carbon nanotubes by O2 plasma. Appl Surf Sci 2007, 253: 8945–8951.
Zhang F, Shen J, Sun J. Processing and properties of carbon nanotubes nano-WC–Co composites. Mat Sci Eng A 2004, 381: 86–91.
Zheng Y, Liu W, Wang S, et al. Effect of carbon content on the microstructure and mechanical properties of Ti(C,N)-based cermets. Ceram Int 2004, 30: 2111–2115.
Acknowledgements
This research was financially supported by the Science and Technology Department of Fujian Province under Project No. 2014H0037, the Production, Education and Research of Fujian Provincial Education Department under Project No. JK2016040, and the Key Subject Project of Fujian Province.
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is published with open access at Springerlink.com
Rights and permissions
Open Access The articles published in this journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Wu, P., Liu, S.C. & Jiang, X.R. Effect of multi-walled carbon nanotube addition on the microstructures and mechanical properties of Ti(C,N)-based cermets. J Adv Ceram 7, 58–63 (2018). https://doi.org/10.1007/s40145-017-0256-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40145-017-0256-y