Abstract
Due to the rapidly increasing demand for energy and environmental sustainability, stable and economical hydrogen production has received increasing attention in the past decades. In this regard, hydrogen production through photo- or electrocatalytic water splitting has continued to gain ever-growing interest. However, the existing catalysts are still unable to fulfill the demands of high-efficiency, low-cost, and sustainable hydrogen production. Layered metal trichalcogenidophosphate (MPQ3) is a newly developed two-dimensional material with tunable composition and electronic structure. Recently, MPQ3 has been considered a promising candidate for clean energy generation and related water splitting applications. In this minireview, we firstly introduce the structure and methods for the synthesis of MPQ3 materials. In the following sections, recent developments of MPQ3 materials for photo- and electrocatalytic water splitting are briefly summarized. The roles of MPQ3 materials in different reaction systems are also discussed. Finally, the challenges related to and prospects of MPQ3 materials are presented on the basis of the current developments.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Highlights
-
Layered metal trichalcogenidophosphate (MPQ3) is a newly developed 2D material with tunable composition and electronic structure, and is a promising candidate for clean energy generation and related water splitting applications.
-
There are no comprehensive studies on layered MPQ3 materials for photo- and electrocatalytic water splitting; here, we provide a brief summary of recent work and offer an overview of this promising field.
2 Introduction
With the rapidly increasing demand for energy and extensive use of fossil fuels, there is an urgent need to find alternative sources of clean energy to solve the ever-growing environmental problems. Hydrogen, the simplest and most abundant element in the universe, has a high energy density and is sustainable and eco-friendly. The combustion of hydrogen with air/oxygen offers high energy and gives off water as the end product. Hence, hydrogen is considered one of the most promising candidates for fulfilling future energy demands [1, 2]. It has been long recognized that water can be decomposed under solar excitation in plants. Electrical power can also be used to facilitate water splitting into gaseous hydrogen and oxygen, which can be stored for further use. However, it is still a huge challenge to split water on the industrial scale as efficiently as in plants. Moreover, the state-of-the-art electrocatalytic techniques for water splitting still rely heavily on noble metal catalysts such as Pt for the hydrogen evolution reaction (HER) and IrO2 for the oxygen evolution reaction (OER). Thus, the generation of hydrogen and oxygen is a high-cost operation, making the use of hydrogen and oxygen as commercial fuels challenging. Therefore, it is highly desirable to find earth-abundant, cost-effective, and highly active catalysts for water splitting [3].
As requirements of effective photocatalytic water splitting, the catalysts should possess a suitable bandgap and carrier mobility [4]. The photo-generated excitons (commonly known as electron–hole pairs) must migrate separately to the surface of the catalyst and be consumed by corresponding redox reactions. In order to prevent recombination of the excited electron and hole, the redox reactions should proceed within the lifetime of these species [4,5,6,7]. In this regard, band structure engineering and charge carrier concentration tuning are highly important. Further, as key factors, the catalyst must enable fast charge transfer kinetics and lower the energy for chemisorption of various intermediate species on the catalyst surface to improve the electrochemical water splitting efficiency [8,9,10,11]. It has been demonstrated that the chemisorption energies of intermediate species on the catalyst surface can be adjusted by varying the chemical composition of the electrocatalysts [10]. For instance, phosphorus-doped pyrite-type cobalt disulfide exhibits excellent hydrogen evolution activity because of effective reduction in the energy for adsorption of atomic hydrogen on the adjacent cobalt sites doped with phosphorus atoms [11,12,13]. Therefore, in order to meet the above-mentioned requirements, variation of the composition of the catalyst should be effective for adjusting the bandgap and electronic structures, charge carrier concentration and mobility modulation, and regulation of the chemisorption energy in semiconductor-based catalytic systems.
Layered metal trichalcogenidophosphates, known as metal phosphorus trichalcogenides, have attracted increasing attention in recent years. Since the first discovery of metal chalcogenidophosphate by Friedel more than a century ago [14], a large family of these layered compounds has been synthesized and studied. The general formula for these compounds can be expressed as MIIPQ3 or M I0.5 M III0.5 PQ3, where MII represents bivalent metals such as Mg, V, Mn, Fe, Co, Ni, Zn, Cd, Sn, and Hg; MI represents metal ions such as Cu and Ag; and MIII can be Cr, V, Al, Ga, In, Bi, Sc, Er, or Tm; Q is a chalcogen, i.e., S or Se (to be more concise, the abbreviation MPQ3 is used hereinafter) [14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47]. The diversity of metal, phosphorus, and chalcogen atoms in MPQ3 materials offers vast possibilities for achieving the desired physical, chemical, optical, and electronic properties. For instance, the presence of sulfur and phosphorous in metal trithiophosphate compounds exerts a synergistic effect on the surface electronic structure of the central metal atoms [48, 49]. Moreover, the asymmetric MI and MIII cations possess different metal–chalcogen bond distances, resulting in differences in the valence band maximum (VBM) and conduction band minimum (CBM) orbital distribution [49]. Moreover, due to the layered structure of MPQ3 materials, they can be easily prepared as two-dimensional nanostructures having a large surface area and numerous exposed active sites. Due to these merits, MPQ3 materials are widely considered good candidates as high-performance photo- or electrocatalytic water splitting catalysts.
Although there have been several reviews involving layered MPQ3 in recent years, there is still no specific summary on layered MPQ3 materials. In addition, it is important to summarize the progress on the MPQ3 materials used for photo- and electrocatalytic water splitting due to the recent rapid development. In this regard, we aim to provide a brief summary of recent work and offer an overview of this promising field. In this minireview, we provide a brief introduction of the structure of MPQ3 materials and subsequently discuss the methods of synthesis, highlighting the advantages and limitations. In the following sections, recent developments of MPQ3 materials for photo- and electrocatalytic water splitting are briefly summarized. The roles of MPQ3 materials in different reaction systems are also discussed. Finally, the challenges and prospects of MPQ3 materials are proposed on the basis of their current developments.
3 Crystal Structure and Synthesis of Layered MPQ3
Generally, trithio- and triseleno-phosphate compounds are considered to have a layered crystal structure similar to that of transition metal disulfides (TMDs, e.g., MoS2). Figure 1 shows the typical crystal structures of MoS2, MIIPQ3, and Ag0.5M III0.5 PQ3. In contrast to the structure of MoS2, P–P pairs substitute one third of the metal atoms within the MPQ3 layer. Therefore, each MQ6 octahedron is surrounded by three P2Q6 groups. The metal layer in MPQ3 is encapsulated by both chalcogens and phosphorus atoms. In the case of Ag0.5M III0.5 PQ3 particularly, the asymmetric AgI and MIII cations possess different metal–chalcogen binding distances, resulting in a distorted P2Q6 polyhedron (Fig. 1c, Ag0.5M III0.5 PQ3) [49].
Conventionally, high-quality MPQ3 single crystals are synthesized by the chemical vapor transport (CVT) method, in which pure elemental powders are used as the starting materials and a small amount of iodine is used as the transport agent. These starting materials are vacuum-sealed in a quartz tube, which is then placed in a horizontal tube furnace with a temperature gradient. During the CVT process, the transport agent carries the starting materials from the hot end to the cold end of the tube for crystal growth. The crystal growth temperature is usually higher than 600 °C and may vary depending on the metal species. The growth period ranges from several days to even 2 months [24]. Finally, in order to obtain the nanosheets (i.e., single- or few-layered MPQ3 products), exfoliation techniques such as micromechanical exfoliation or liquid exfoliation are carried out [43, 50, 51]. Limited by the high reaction temperature, long growth period, and possible explosion hazards, the CVT method is unsuitable for large-scale production of MPQ3 materials.
Compared with the CVT method, chemical vapor deposition (CVD) is more suitable for the large-scale growth of MPQ3. In a modified CVD method for the synthesis of NiPS3 [3], elemental sulfur and phosphorus are evaporated in the two-zoned tube furnace under Ar flow; Ni(OH)2 nanosheets grown on various substrates as a metal source are simultaneously heated in another zone. The reaction time for this CVD process is only 1 h, which is greatly reduced when compared with the CVT method. Due to the non-exclusive reaction environment and the reduced reaction time, the CVD process is considered a safer and faster method for producing MPQ3 nanosheets. However, the requirement for a highly pure inert atmosphere and complex reaction conditions may limit scalable production.
Recently, a method termed solid-state transformation (SST) was developed for the large-scale production of MPQ3 materials [4]. In a typical SST process, metal hydroxides are chosen as starting materials, and elemental sulfur and phosphorus are directly ground with the hydroxides. The mixture is vacuum-sealed in a Pyrex or quartz tube and heated at a certain temperature. After removing the excess sulfur and phosphorus, the MPQ3 materials can be obtained. Depending on the compositions and morphologies of the starting metal hydroxides, the products can be either nanosheets or other nanostructures. The reaction temperature of the SST method may be even lower than that of the CVT and CVD methods. With such a low reaction temperature and no requirement for the two-zone furnace, the SST method is regarded as a promising technique for mass production of MPQ3.
4 MPQ3 for Photocatalytic Water Splitting
As one of the most promising approaches to solving the world’s energy and environmental issues, semiconductor-based photocatalytic water splitting has gained a great deal of attention since its first discovery in the last century [52]. The water splitting reactions that occur on the photocatalyst can be simply summarized as follows [7, 53, 54]:
where e− and h+ are the photo-generated electron and hole. In order to realize overall water splitting, the semiconductor must have a more negative CBM than the H+/H2 energy level, and the VBM should be more positive than the O2/H2O energy level. Therefore, the standard Gibbs free energy (ΔG) of at least 1.23 eV needs to be overcome [7, 49]. In addition, the wavelength of ultraviolet and visible light for photocatalysis ranges from 200 to 780 nm. Therefore, the bandgap of the semiconductor-based photocatalysts should be in the range of 1.59–6.20 eV.
The bandgap structures of many single-layered group II trichalcogenidophosphates (MIIPQ3, MII = Mg, Zn, Cd) and group III silver trichalcogenidophosphates (Ag0.5M III0.5 PQ3, MIII = Sc, In) have been studied based on density functional theory (DFT) calculations [49]. As shown in Fig. 2a, Liu and Peng aligned the CBM and VBM of these compounds with respect to the water redox potential levels and evaluated their redox abilities. In consideration of the stability of single-layered MPQ3 and the changes in the redox potential based on the pH, Zhou and co-workers also studied the band edges and the optical properties of MPS3 (M = Mn, Fe, Ni, Zn, Cd) and MPSe3 (M = Mn, Fe) using theoretical calculations [55]. Using the theoretically calculated optical absorption coefficient (α) of a series of single-layer MPQ3 species, MnPSe3, FePQ3, and NiPS3 were found to exhibit optical absorption in the visible spectral range (1.59–3.26 eV) [55]. A similar tendency was also experimentally observed by Kloc and Xiong [50]. Notably, among the studied compounds, FePSe3 was found to exhibit the narrowest bandgap based on both calculated and experimental data. However, FePSe3 was not suitable for water splitting at pH = 7 as the CBM is lower than the reduction potential of H+/H2, whereas MnPSe3 showed strong adsorption in the visible spectral region. Further, the calculated carrier mobility of single-layered MnPSe3 is much higher than that of many other 2D materials (electron mobility: 625.9 cm2 V−1 S−1; hole mobility: 34.7 cm2 V−1 S−1). The huge difference between the mobility of these two carriers suggests effective separation of the photo-generated electron–hole pairs during the photocatalytic process. This makes MnPSe3 a promising candidate for high-efficiency photocatalytic water splitting.
Apart from the individual materials, the combination of photoactive materials with other co-catalysts to form an integrated system is another important field in photocatalytic research. Therefore, it is necessary to study the electronic structure of the heterojunctions in these integrated systems. Mi and co-workers recently explored the electronic structure of MnPSe3-based 2D van der Waals heterostructures using DFT calculations. In the case of the MnPSe3/MoS2 heterostructure [56], different stacking patterns of single-layered MnPSe3 and MoS2 were studied, as presented in Fig. 3a. In some stacking patterns, spin splitting at the VBM of the MnPSe3 layer was observed due to hybridization of the d orbital in Mn, thus enhancing the electron mobility (Fig. 3b). In addition, MnPSe3/MoS2 is a type II heterostructure in which the top part of the valence band is mainly contributed by MnPSe3, while the bottom part of the conduction band is mainly contributed by MoS2. Typically, the type I heterostructure has a symmetrical offset of potential barriers for the electrons and holes, where direct exciton transition occurs at the heterointerface. In type II heterostructures, the electrons and holes are localized on different sides of the heterointerface, which results in an indirect exciton transition [57,58,59]. The type II band alignment results in separation of the photo-generated electrons and holes, thus enhancing the photocatalytic efficiency. They also calculated the electronic structure of MnPSe3/CrSiTe3, where MnPSe3 and CrSiTe3 possess similar crystal structures and have a low lattice mismatch (about 4.7%) [60]. In this work, Mi et al. studied the effects of strain and an electric field on the heterostructures. When the heterostructure was formed under tensile strain, the band-edge position shifted from type I to type II, accompanied by a transition from an indirect bandgap to direct bandgap. When a compressive strain was applied, the heterostructure changed from semiconducting to conducting. At the same time, the band alignment could be tuned to type I or type II by applying a suitable electric field. The two mentioned studies demonstrated the possibility of band structure modulation of the MnPSe3-based van der Waals heterostructure, suggesting the potential applicability of the novel heterostructures in photo-electronics.
Although MnPSe3 has gained extensive attention and shows great potential in the field of photocatalytic water splitting, experimental studies are still focused on the fundamental physical properties [50, 61]. Recently, He and co-workers turned their attention to Fe- and Ni-based compounds instead of Mn-based trichalcogenidophosphates [62, 63]. They conducted an experimental study of few-layered nickel trithiophosphate (NiPS3) prepared by a modified CVD process for photocatalytic hydrogen evolution [62]. The resultant NiPS3 nanosheets had a lateral size larger than 15 μm and thickness of less than 3.5 nm. The as-synthesized ultrathin NiPS3 nanosheets could be used for photo-hydrogen evolution in neutral and pure water under xenon light or simulated AM1.5G solar illumination with a constant evolution rate of ~ 26.42 μmol g−1 h−1. However, the intrinsic driving force was not energetically sufficient for oxygen evolution due to the misaligned valance band of NiPS3 relative to the water oxidation potential. Therefore, the NiPS3 nanosheets suffered from a disadvantage similar to that of many other single-component photocatalysts, wherein the photoactivity is degraded by photo-anodic corrosion. This is because during the photocatalytic process, the photo-generated electrons are consumed by H2 generation, while the photo-generated holes accumulate due to the misaligned valance band of NiPS3 relative to the water oxidation potential. The highly oxidizing photo-generated holes then react with NiPS3 itself [53]. Consequently, this study experimentally confirms the photocatalytic activity of NiPS3. Nevertheless, the performance of NiPS3 is much poorer than that of the commercially available materials, and this material is still far from practical application [7, 53]. Further study toward the design and construction of novel MPQ3-based photocatalysts is still needed.
The photocatalytic hydrogen evolution performance of FePS3 compounds was also recently studied [63]. He and co-workers developed a two-step hydrazine intercalation and exfoliation process for the synthesis of single-layered FePS3 quantum sheets from bulk FePS3 crystals. The resulting quantum sheets possessed a lateral size of 4–8 nm and thickness of less than 2 nm (Fig. 4a). As discussed above, the bandgap is closely related to the photocatalytic activity. In the case of the FePS3 quantum sheets, the decreased size from bulk to quantum sheets increased the bandgap (Fig. 4b). Therefore, the hydrogen production efficiency of the FePS3 quantum sheets was three times higher (290 μmol g−1 h−1) than that of the bulk FePS3 (Fig. 4c). This value is around 11-fold higher than that of the NiPS3 nanosheets [62], but still about an order of magnitude lower than that of the MoS2-based materials [64] and Ni/Cu-modified titania [65]. Furthermore, measurement of the hydrogen evolution over 40 h indicated that these FePS3 quantum sheets were more stable than the NiPS3 nanosheets (Fig. 4d). Given that the reduced size of the quantum sheets leads to the exposure of numerous boundaries and active sites, the authors attributed the enhanced performance to the effective separation of photo-excited electrons and holes. When FePS3 and NiPS3 are compared with other MPQ3 compounds, the relatively narrower bandgap of FePS3 and NiPS3 is thought to be the main contributor to their visible light photocatalytic activity. However, the narrow bandgap also results in insufficient exciton energy. Therefore, dopant metals such as Mn, Zn, and Cd that can broaden the bandgap might be helpful for bandgap engineering and heterostructure construction.
5 MPQ3 for Electrocatalytic Hydrogen Evolution
Photocatalytic water splitting relies strongly on the absorption of solar energy, making this technique generally inefficient. In contrast, electrochemical catalysis, as one of the fundamental processes in electrochemistry, offers a more feasible and practical option [1]. In the past several decades, researchers have paid more attention to non-noble metal-based electrocatalysts due to their low cost. As a kind of semiconductor with tunable and suitable physiochemical properties, layered MPQ3 compounds were also evaluated for electrocatalytic hydrogen evolution. A general mechanism for the electrochemical HER process might include an adsorption step and desorption steps as follows [66,67,68]:
Volmer adsorption step:
Heyrovsky desorption step:
Tafel desorption step:
where Cat is the catalyst and Cat − H refers to the adsorbed H atom on the catalyst surface. Depending on the desorption step, the whole HER process can follow the Volmer–Heyrovsky or Volmer–Tafel pathway. Because the HER is the cathodic half reaction of electrochemical water splitting, the self-corrosion (such as photo-anodic corrosion) that occurs during photocatalytic water splitting could be avoided.
Recently, Sampath and co-workers reported the HER performance of liquid-exfoliated NiPS3 nanosheets over a wide pH range of 1–14 and in a neutral 3.5 wt% NaCl solution that simulates seawater [67]. The bulk NiPS3 crystals were firstly synthesized through the CVT method. After exfoliation in the liquid phase, NiPS3 nanosheets with a lateral size of 200–400 nm and thickness of 0.65–0.7 nm were obtained. The exfoliated NiPS3 nanosheets showed improved electrochemical HER performance under all the pH conditions. The overpotential of the exfoliated NiPS3 nanosheets at 10 mA cm−2 in pH = 1, 14, and neutral 3.5 wt% NaCl solution was 297, 398, and 816 mV, respectively. The authors also studied the HER activity through DFT calculation. By evaluating the free energy of hydrogen adsorption (ΔGH), they concluded that the phosphorus atom is the preferred site for H adsorption, consistent with the inference from metal phosphides [69, 70]. Later, Sampath’s group reported a similar study on the HER performance of exfoliated FePS3 nanosheets [71]. The FePS3 nanosheets demonstrated better HER performance than the Ni-based analogs, where the overpotential at 10 mA cm−2 in pH = 1, 14, and neutral 3.5 wt% NaCl solution was 211 ± 3, 337 ± 4, and 637 ± 4 mV, respectively. When combined with reduced graphene oxide (rGO), the HER performance of both compounds could be further improved. The authors ascribed this enhancement to the improved conductivity derived from rGO.
Pumera et al. [68] also reported a systematic study of the electrocatalytic HER performance under acidic conditions for a series of MPS3 compounds, including MnPS3, FePS3, CoPS3, NiPS3, ZnPS3, CdPS3, and SnPS3. The overpotentials of NiPS3 and CoPS3 were 530 and 590 mV at a current density of 10 mA cm−2, respectively. Here, the overpotential of FePS3 (860 mV) was found to be higher than that of its Ni and Co analogs. The overpotentials of the other MPS3 compounds were all higher than that of the bare glassy carbon electrode. According to their results, it is interesting that bulk NiPS3 had a lower overpotential than bulk FePS3, whereas Sampath et al. reported that exfoliated NiPS3 nanosheets possess a higher overpotential than exfoliated FePS3 nanosheets. Therefore, further study still needs to be conducted to explore the intrinsic properties of these materials.
Beyond the single-metal MPS3 compounds, a series of Ni/Co bimetal trithiophosphate nanosheets (Ni1−xCoxPS3, x = 0, 0.03, 0.05, 0.07, and 0.09) were prepared, and their HER performance under alkaline conditions (pH = 14) was evaluated [72]. The few-layered Ni1−xCoxPS3 nanosheets were obtained by liquid exfoliation. Importantly, after Co doping, the HER performance of these Ni1−xCoxPS3 nanosheets improved dramatically compared with that of the NiPS3 nanosheets. Specifically, Ni0.95Co0.05PS3 exhibited superior HER activity, with an overpotential of 71 mV at a current density of 10 mA cm−2 and a Tafel slope of 77 mV dec−1 (Fig. 5a, b). This performance was much better than that of the NiPS3 and FePS3 nanosheets supported by conductive rGO [67, 71]. Electrical conductivity measurements showed that Co doping can dramatically improve the conductivity of NiPS3 (by about three orders of magnitude), suggesting changes in the electronic structure of NiPS3 after Co doping.
It is well known that Co is quite expensive compared with other transition metals like Mn, Fe, and Ni. Moreover, compared with Co, Fe is earth abundant and more common in high-efficiency hydrogenase. The incorporation of Fe with Ni might also be reasonable for modulating the HER activity of NiPS3-based compounds. Therefore, Jin et al. [73] prepared a series of Ni/Fe bimetal trithiophosphate nanosheets (Ni1−xFexPS3 samples, x = 0, 0.05, 0.1, 0.15, and 1) as electrocatalysts for the HER. Through DFT calculation of ΔGH, the authors proposed that H atom adsorption on edge sites is more favorable than on the basal surface. In addition, the ΔGH for the S sites in NiPS3 is negative, while it is positive for the S and P sites of FePS3, implying the existence of optimal intermediates with better HER activity. The results confirmed the speculation that Fe-doped NiPS3 can exhibit electrocatalytic HER performance comparable that of the Co-doped counterpart. For the optimized Ni0.9Fe0.1PS3 compound, the overpotential at 10 mA cm−2 was 72 mV and the Tafel slope could reach 73 mV dec−1 (Fig. 5c, d).
6 MPQ3 for Electrocatalytic Oxygen Evolution
In the electrochemical water splitting process, the HER is the cathodic half reaction and the OER occurs at the anode. However, the OER process is significantly different from the HER. The general mechanism for the OER process is widely represented as follows [74]:
Notably, the OER in alkaline solution can be divided into four steps as follows [75]:
where OH*, O*, and OOH* are the corresponding free radical species. Based on the calculated ΔG calculation, the reaction should overcome the lowest voltage of 1.23 V versus the reversible hydrogen electrode (RHE). In addition, the existence of the above free radical species causes the OER process to always occur at an oxidized surface.
In recent work, Pumera et al. [68] compared the OER activity of a series of bulk MPS3 compounds in 1 m KOH solution. The results showed that most of the MPS3 compounds exhibited low OER activity, whereas only CoPS3 showed higher OER activity than the other analogs. However, the results are dubious because CoPS3 can afford a current density of 10 mA cm−2 at a potential of 0.84 V versus RHE, which is less than 1.23 V. Recently, our group evaluated the OER performance of bulk and liquid-exfoliated NiPS3 nanosheets under alkaline conditions [51]. The exfoliated NiPS3 nanosheets provided an overpotential of 301 mV@10 mA cm−2, which is about 140 mV lower than that of bulk NiPS3. Comparison of the electrochemically active surface area (ECSA) of these two materials indicates that the ECSA of the exfoliated NiPS3 nanosheets is about 3.4-fold larger than that of bulk NiPS3. Further, the current density of the exfoliated NiPS3 nanosheets at 1.55 V is more than fivefold higher than that of bulk NiPS3. The nonlinear increase in the current density, along with the ECSA, indicates that the large ECSA of the exfoliated NiPS3 nanosheets is not the only reason for the improved OER activity.
A more detailed OER study of exfoliated NiPS3 nanosheets was reported by Schuhmann et al. [48]. As mentioned above, the free radical species generated during the OER process might react with the catalyst. As such, surface oxidation cannot be avoided for MPS3 materials. By employing a combination of scanning electrochemical microscopy (SECM), in situ Raman spectroscopy, SEM, and XPS measurements, Schuhmann et al. demonstrated that during the OER process, the NiPS3 surface is oxidized, resulting in the formation of a NiPS3@amorphous NiOOH core–shell heterostructure. According to their studies, the surface oxidation process can be divided into two steps. In the first step, the NiPS3 surface is oxidized to Ni(OH)2 when immersed in KOH solution. With increasing applied voltage, Ni2+ is further oxidized to Ni3+, accompanied by the transformation of Ni(OH)2 to NiOOH before oxygen evolution. This detailed oxidation mechanism was not provided for previously reported NiS2/NiS and NiCoP/C nanoboxes and other MPQ3 compounds [51, 68, 76, 77]. Notably, the core–shell heterostructure can provide a current density of 10 mA cm−2 with an overpotential of 350 mV, which is lower than that of noble metal oxide catalysts [78, 79]. Furthermore, DFT calculation indicates that the metallic character of the NiPS3 nanosheets can provide an electron conduction pathway for efficient transport to surface NiOOH species. The NiOOH species at the surface with a high density of accessible active edges and defect sites can act as oxygen evolution centers. The verification of the relationship between this uniquely formed in situ core–shell heterostructure and the outstanding OER activity provides a useful guideline for understanding the OER mechanism in MPS3 materials.
Studies on the OER performance of Ni/Fe bimetal trithiophosphates have also been documented [73, 80]. As reported by Jin and co-workers [73], Ni/Fe bimetal trithiophosphate nanosheets (Ni1−xFexPS3 samples, x = 0, 0.05, 0.1, 0.15, 1) could be synthesized by a traditional CVT method, followed by liquid exfoliation. The resulting FePS3 was almost inactive for OER catalysis, whereas the Ni1−xFexPS3 nanosheets showed much better OER performance than the undoped NiPS3. Ni0.9Fe0.1PS3 exhibited the best OER activity among all the Ni1−xFexPS3 samples, providing a current density of up to 20 mA cm−2 at an overpotential of 329 mV. In comparison, our group developed a novel solid-state transformation (SST) process for the mass production of MPQ3 nanosheets [80]. Using this method, Fe-doped NiPS3 nanosheets (Fe = 5.93% in atomic percentage) with a smaller lateral size (~ 100 nm) than the exfoliated congeners (several micrometers) could be prepared. Interestingly, the OER performance of the Fe-doped NiPS3 nanosheets was much better than that of the NiPS3 and Fe-doped Ni(OH)2 nanosheets, as well as that of the exfoliated Ni0.9Fe0.1PS3 nanosheets. The optimized sample showed an overpotential of 256 mV to reach a current density of 30 mA cm−2. The Tafel slope of this Fe-doped NiPS3 nanosheet (46 mV dec−1) was also better than that of IrO2 (56 mV dec−1) and RuO2 (86 mV dec−1). As demonstrated by the ECSA tests, electrochemical impedance spectroscopy (EIS), and DFT calculation, the superior electrocatalytic activity of the Fe-doped NiPS3 nanosheets might be ascribed to the Fe-doping. DFT calculation revealed that doping with Fe could improve the electronic conductivity and significantly weaken the interaction between NiPS3 and the oxygen-containing intermediates (Fig. 6). Combined with all of the above-mentioned theoretical studies related to electrocatalytic water splitting, metal doping in MPQ3 materials is a prospectively efficient way to achieve intermediate binding energy of hydrogen/oxygen species (and, therefore, improved catalytic performance). In this regard, the integration of metals that fall on the opposite slopes of the volcano plots should be reasonable for the design of multicomponent MPQ3 catalysts [7, 81].
Furthermore, we also designed a series of novel 0D–2D nanohybrids composed of a Ni1−xFexPS3 (x = 0.1, 0.2, 0.3, 0.4) nanomosaic decorated on the surface of Ti3C2Tx@MXene [82]. Here, nanomosaic refers to Ni1−xFexPS3 nanoparticles with irregular shapes that are dozens of nanometers in lateral size, which covered the surface of MXene to form a mosaiclike structure. Such a heterostructure integrating the Ni1−xFexPS3 nanomosaic and conductive Ti3C2Tx MXene can combine the advantages of each constituent to significantly enhance the conductivity and active sites. The resulting nanohybrids exhibited improved HER and OER performance relative to the individual materials. Among all the tested samples, the Ni0.7Fe0.3PS3@MXene nanohybrid, as an OER catalyst, showed excellent catalytic performance (282 mV@10 mA cm−2) and a Tafel slope of 36.5 mV dec−1. Further, the Ni0.9Fe0.1PS3@MXene nanohybrid showed optimized HER performance in alkaline solution (with an overpotential of 196 mV). Due to their efficacy for the electrocatalytic HER and OER, overall water splitting could be achieved with the nanohybrid-based catalysts. The Ni0.7Fe0.3PS3@MXene||Ni0.9Fe0.1PS3@MXene couple showed a low onset potential of 1.42 V and a potential of only 1.65 V to reach a current density of 10 mA cm−2.
Finally, a comparison of all the MPQ3 compounds with known electrochemical catalytic properties is presented in Table 1. The conditions used to evaluate each compound, including the supporting electrode, the electrolyte, and the overpotential, as well as the corresponding Tafel slope and corresponding references, are also given. As summarized in Table 1, without metal doping, the NiPS3 nanostructures generally show an overpotential of about 300 mV under acidic conditions for the HER. Under alkaline conditions, the value was further increased to about 400 mV. The performance of NiPS3 is worse than that of most of the alloys, metal carbide, metal sulfide, and metal phosphide catalysts [3]. However, when Fe or Co is introduced as a dopant, the overpotential can be dramatically decreased to around 70 mV under alkaline conditions. This value is less than that of most of the alloy-based and metal carbide/nitride catalysts, which suggests better HER performance. The same phenomenon was observed in the OER studies. For the OER under alkaline conditions, NiPS3 shows an overpotential of 350–450 mV, which is only comparable with that of some metal oxides and phosphides [3, 83, 84]. Nevertheless, for Fe-doped-NiPS3, the overpotential could reach 256 mV@30 mA cm−2, which is better than that of the metal oxides, metal layered double hydroxides, and some metal phosphides [83,84,85,86].
7 Summary and Outlook
In this minireview, recent advances in the study of metal trichalcogenidophosphates for photo- and electrocatalytic water splitting were briefly summarized. Theoretical calculations have revealed the possibility of adjusting the electronic structure of MPQ3-based materials through composition tuning, doping, and heterostructure interface conjunction. The success of MPQ3 catalysts with various compositions and structures for overall water splitting has confirmed their promising practical application. There is no doubt that MPQ3-based materials are good candidates as high-performance photo- or electrocatalytic water splitting catalysts. However, studies on the catalytic properties of MPQ3 are still in the early stage, and there are still many challenges related to MPQ3 that must be overcome, such as preventing anodic corrosion during the photocatalytic water splitting process, proper selection of doping metals, probing the active site, and exploring the catalytic mechanism during the HER and OER processes.
In the near future, the most urgent task related to MPQ3 catalysts is understanding the relationships among the composition, electronic structure, and adsorption free energies of the reactive intermediates on the MPQ3 surface. Systematic understanding of doping metal selection is needed. Moreover, the construction of MPQ3-based heterostructures is another important undertaking for achieving high-performance water splitting catalysts. In this regard, more effort should be devoted to control of the carrier separation and migration in MPQ3-based heterostructures by carefully selecting the co-catalysts.
References
S. Dunn, Hydrogen futures: toward a sustainable energy system. Int. J. Hydrogen Energy 27(3), 235–264 (2002). https://doi.org/10.1016/s0360-3199(01)00131-8
M. Momirlan, T. Veziroglu, The properties of hydrogen as fuel tomorrow in sustainable energy system for a cleaner planet. Int. J. Hydrogen Energy 30(7), 795–802 (2005). https://doi.org/10.1016/j.ijhydene.2004.10.011
I. Roger, M.A. Shipman, M.D. Symes, Earth-abundant catalysts for electrochemical and photoelectrochemical water splitting. Nat. Rev. Chem. 1, 0003 (2017). https://doi.org/10.1038/s41570-016-0003
T. Hisatomi, J. Kubota, K. Domen, Recent advances in semiconductors for photocatalytic and photoelectrochemical water splitting. Chem. Soc. Rev. 43(22), 7520–7535 (2014). https://doi.org/10.1039/C3CS60378D
F.E. Osterloh, Inorganic materials as catalysts for photochemical splitting of water. Chem. Mater. 20(1), 35–54 (2008). https://doi.org/10.1021/cm7024203
X. Chen, S. Shen, L. Guo, S.S. Mao, Semiconductor-based photocatalytic hydrogen generation. Chem. Rev. 110(11), 6503–6570 (2010). https://doi.org/10.1021/cr1001645
S. Chen, T. Takata, K. Domen, Particulate photocatalysts for overall water splitting. Nat. Rev. Mater. 2, 17050 (2017). https://doi.org/10.1038/natrevmats.2017.50
Y. Shi, B. Zhang, Recent advances in transition metal phosphide nanomaterials: synthesis and applications in hydrogen evolution reaction. Chem. Soc. Rev. 45(6), 1529–1541 (2016). https://doi.org/10.1039/C5CS00434A
J. Wang, W. Cui, Q. Liu, Z. Xing, A.M. Asiri, X. Sun, Recent progress in cobalt-based heterogeneous catalysts for electrochemical water splitting. Adv. Mater. 28(2), 215–230 (2016). https://doi.org/10.1002/adma.201502696
J.K. Nørskov, T. Bligaard, A. Logadottir, J.R. Kitchin, J.G. Chen, S. Pandelov, U. Stimming, Trends in the exchange current for hydrogen evolution. J. Electrochem. Soc. 152(3), J23–J26 (2005). https://doi.org/10.1149/1.1856988
M. Caban-Acevedo, M.L. Stone, J.R. Schmidt, J.G. Thomas, Q. Ding, H.C. Chang, M.L. Tsai, J.H. He, S. Jin, Efficient hydrogen evolution catalysis using ternary pyrite-type cobalt phosphosulphide. Nat. Mater. 14, 1245–1251 (2015). https://doi.org/10.1038/nmat4410
W. Liu, E. Hu, H. Jiang, Y. Xiang, Z. Weng, M. Li, Q. Fan, X. Yu, E.I. Altman, H. Wang, A highly active and stable hydrogen evolution catalyst based on pyrite-structured cobalt phosphosulfide. Nat. Commun. 7, 10771 (2016). https://doi.org/10.1038/ncomms10771
Z. Dai, H. Geng, J. Wang, Y. Luo, B. Li, Y. Zong, J. Yang, Y. Guo, Y. Zheng, X. Wang, Q. Yan, Hexagonal-phase cobalt monophosphosulfide for highly efficient overall water splitting. ACS Nano 11(11), 11031–11040 (2017). https://doi.org/10.1021/acsnano.7b05050
M.C. Friedel, Soufre et ses composés—sur une nouvelle série de sulfophosphures, les thiohypophosphates. C. R. l’Academie. Sci. Ser. III. 119, 260 (1894)
H. Hahn, W. Klingen, Uber einige ternäre verbindungen vom typ des arsenopyrits. Naturwissenschaften 52(17), 494 (1965). https://doi.org/10.1007/bf00646574
W. Klingen, G. Eulenberger, H. Hahn, Uber hexathio- und hexaselenohypodiphosphate vom typ M2 II P2X6. Naturwissenschaften 55(5), 229–230 (1968). https://doi.org/10.1007/bf00606219
W. Klingen, G. Eulenberger, H. Hahn, Uber hexachalkogeno-hypodiphosphate vom typ M2P2X6. Naturwissenschaften 57(2), 88 (1970). https://doi.org/10.1007/bf00590690
R. Nitsche, P. Wild, Crystal growth of metal-phosphorus-sulfur compounds by vapor transport. Mater. Res. Bull. 5(6), 419–423 (1970). https://doi.org/10.1016/0025-5408(70)90080-2
W. Klingen, G. Eulenberger, H. Hahn, Uber die kristallstrukturen von Fe2P2Se6 und Fe2P2S6. Z. Anorg. Allg. Chem. 401(1), 97–112 (1973). https://doi.org/10.1002/zaac.19734010113
W. Klingen, R. Ott, H. Hahn, Uber die darstellung und eigenschaften von hexathio- und hexaselenohypodiphosphaten. Z. Anorg. Allg. Chem. 396(3), 271–278 (1973). https://doi.org/10.1002/zaac.19733960305
R. Nitsche, Crystal chemistry, growth and properties of multi-cation chalcogenides. J. Phys. Colloq. 36(C3), 9–15 (1975). https://doi.org/10.1051/jphyscol:1975302
M.Z. Jandali, G. Eulenberger, H. Hahn, Die kristallstrukturen von Hg2P2S6 und Hg2P2Se6. Z. Anorg. Allg. Chem. 447(1), 105–118 (1978). https://doi.org/10.1002/zaac.19784470110
A. Wiedenmann, J. Rossat-Mignod, A. Louisy, R. Brec, J. Rouxel, Neutron diffraction study of the layered compounds MnPSe3 and FePSe3. Solid State Commun. 40(12), 1067–1072 (1981). https://doi.org/10.1016/0038-1098(81)90253-2
G. Ouvrard, R. Brec, J. Rouxel, Structural determination of some MPS3 layered phases (M = Mn, Fe Co, Ni and Cd). Mater. Res. Bull. 20(10), 1181–1189 (1985). https://doi.org/10.1016/0025-5408(85)90092-3
G. Ouvrard, R. Fréour, R. Brec, J. Rouxel, A mixed valence compound in the two dimensional MPS3 family: V0.78PS3 structure and physical properties. Mater. Res. Bull. 20(9), 1053–1062 (1985). https://doi.org/10.1016/0025-5408(85)90204-1
R. Brec, Review on structural and chemical properties of transition metal phosphorous trisulfides MPS3. Solid State Ionics 22(1), 3–30 (1986). https://doi.org/10.1016/0167-2738(86)90055-x
E. Prouzet, G. Ouvrard, R. Brec, Structure determination of ZnPS3. Mater. Res. Bull. 21(2), 195–200 (1986). https://doi.org/10.1016/0025-5408(86)90206-0
P.J.S. Foot, T. Katz, S.N. Patel, B.A. Nevett, A.R. Pieecy, A.A. Balchin, The structures and conduction mechanisms of lithium-intercalated and lithium-substituted nickel phosphorus trisulphide (NiPS3), and the use of the material as a secondary battery electrode. Phys. Status Solidi A 100(1), 11–29 (1987). https://doi.org/10.1002/pssa.2211000102
Z. Ouili, A. Leblanc, P. Colombet, Crystal structure of a new lamellar compound: Ag1/2In1/2PS3. J. Solid State Chem. 66(1), 86–94 (1987). https://doi.org/10.1016/0022-4596(87)90223-4
S. Lee, P. Colombet, G. Ouvrard, R. Brec, General trends observed in the substituted thiophosphate family. Synthesis and structure of silver scandium thiophosphate, AgScP2S6, and cadmium iron thiophosphate, CdFeP2S6. Inorg. Chem. 27(7), 1291–1294 (1988). https://doi.org/10.1021/ic00280a041
A. Aruchamy, Photoelectrochemical investigation of n- and p-doped nickel phosphorous trisulfide(NiPS3). J. Electrochem. Soc. 136(8), 2261 (1989). https://doi.org/10.1149/1.2097288
A. Bhowmick, B. Bal, S. Ganguly, M. Bhattacharya, M.L. Kundu, Investigation of the layered compound fe0.5cd0.5ps3. J. Phys. Chem. Solids 53(10), 1279–1284 (1992). https://doi.org/10.1016/0022-3697(92)90246-A
P.A. Joy, S. Vasudevan, Magnetism in the layered transition-metal thiophosphates MPS3 (M = Mn, Fe, and Ni). Phys. Rev. B 46, 5425–5433 (1992). https://doi.org/10.1103/PhysRevB.46.5425
R. Pfeiff, R. Kniep, Quaternary selenodiphosphates(iv): MIMIII[P2Se6], (MI = Cu, Ag; MIII = Cr, Al, Ga, In). J. Alloys Compd. 186(1), 111–133 (1992). https://doi.org/10.1016/0925-8388(92)90626-K
F. Boucher, M. Evain, R. Brec, Second-order jahn—teller effect in CdPS3 and ZnPS3 demonstrated by a non-harmonic behaviour of Cd2+ and Zn2+ d10 ions. J. Alloys Compd. 215(1–2), 63–70 (1994). https://doi.org/10.1016/0925-8388(94)90819-2
A. Simon, J. Ravez, V. Maisonneuve, C. Payen, V.B. Cajipe, Paraelectric-ferroelectric transition in the lamellar thiophosphate CuInP2S6. Chem. Mater. 6(9), 1575–1580 (1994). https://doi.org/10.1021/cm00045a016
F. Boucher, M. Evain, R. Brec, Phase transition upon d10 Cd2+ ordering in CdPS3. Acta Crystallogr. B 51, 952–961 (1995). https://doi.org/10.1107/s0108768195004824
T. Coradin, R. Clément, P.G. Lacroix, K. Nakatani, From intercalation to aggregation: nonlinear optical properties of stilbazolium chromophores-mps3 layered hybrid materials. Chem. Mater. 8(8), 2153–2158 (1996). https://doi.org/10.1021/cm960060x
X. Bourdon, V. Maisonneuve, V.B. Cajipe, C. Payen, J.E. Fischer, Copper sublattice ordering in layered CuMP2Se6 (M = In, Cr). J. Alloys Compd. 283(1–2), 122–127 (1999). https://doi.org/10.1016/S0925-8388(98)00899-8
D. Gonbeau, T. Coradin, R. Clement, Xps study of stilbazolium chromophores and their intercalation compounds in the MnPS3 layered phase. J. Phys. Chem. B 103(18), 3545–3551 (1999). https://doi.org/10.1021/jp9843196
T.V. Misuryaev, T.V. Murzina, O.A. Aktsipetrov, N.E. Sherstyuk, V.B. Cajipe, X. Bourdon, Second harmonic generation in the lamellar ferrielectric CuInP2S6. Solid State Commun. 115, 605–608 (2000). https://doi.org/10.1016/S0038-1098(00)00257-X
S. Jörgens, A. Mewis, Die kristallstrukturen von hexachalcogeno-hypodiphosphaten des magnesiums und zinks. Z. Anorg. Allg. Chem. 630(1), 51–57 (2004). https://doi.org/10.1002/zaac.200300244
R.F. Frindt, D. Yang, P. Westreich, Exfoliated single molecular layers of Mn0.8PS3 and Cd0.8PS3. J. Mater. Res. 20(5), 1107–1112 (2005). https://doi.org/10.1557/JMR.2005.0161
A.R. Wildes, H.M. Rønnow, B. Roessli, M.J. Harris, K.W. Godfrey, Static and dynamic critical properties of the quasi-two-dimensional antiferromagnet MnPS3. Phys. Rev. B (2006). https://doi.org/10.1103/PhysRevB.74.094422
K.C. Rule, G.J. McIntyre, S.J. Kennedy, T.J. Hicks, Single-crystal and powder neutron diffraction experiments on FePS3: search for the magnetic structure. Phys. Rev. B 76, 134402 (2007). https://doi.org/10.1103/PhysRevB.76.134402
L. Silipigni, T. Quattrone, L. Schirò, V. Grasso, L.M. Scolaro, G. De Luca, G. Salvato, X-ray photoelectron spectroscopy and X-ray excited auger spectroscopy studies of manganese thiophosphate intercalated with sodium ions. J. Appl. Phys. 104, 123711 (2008). https://doi.org/10.1063/1.3048546
A. Pfitzner, S. Seidlmayer, Synthesis and structure determination of AgScP2Se6, AgErP2Se6 and AgTmP2Se6. Z. Anorg. Allg. Chem. 635(4–5), 704–707 (2009). https://doi.org/10.1002/zaac.200900004
B. Konkena, J. Masa, A.J.R. Botz, I. Sinev, W. Xia, J. Kossmann, R. Drautz, M. Muhler, W. Schuhmann, Metallic NiPS3@NiOOH core-shell heterostructures as highly efficient and stable electrocatalyst for the oxygen evolution reaction. ACS Catal. 7(1), 229–237 (2017). https://doi.org/10.1021/acscatal.6b02203
J. Liu, X.B. Li, D. Wang, W.M. Lau, P. Peng, L.M. Liu, Diverse and tunable electronic structures of single-layer metal phosphorus trichalcogenides for photocatalytic water splitting. J. Chem. Phys. 140, 054707 (2014). https://doi.org/10.1063/1.4863695
K.Z. Du, X.Z. Wang, Y. Liu, P. Hu, M.I. Utama, C.K. Gan, Q. Xiong, C. Kloc, Weak van der Waals stacking, wide-range band gap, and raman study on ultrathin layers of metal phosphorus trichalcogenides. ACS Nano 10(2), 1738–1743 (2016). https://doi.org/10.1021/acsnano.5b05927
R. Dangol, Z. Dai, A. Chaturvedi, Y. Zheng, Y. Zhang, K.N. Dinh, B. Li, Y. Zong, Q. Yan, Few-layer NiPS3 nanosheets as bifunctional materials for Li-ion storage and oxygen evolution reaction. Nanoscale 10(10), 4890–4896 (2018). https://doi.org/10.1039/C7NR08745D
A. Fujishima, K. Honda, Electrochemical photolysis of water at a semiconductor electrode. Nature 238, 37 (1972). https://doi.org/10.1038/238037a0
H. Ahmad, S.K. Kamarudin, L.J. Minggu, M. Kassim, Hydrogen from photo-catalytic water splitting process: a review. Renew. Sustain. Energy Rev. 43, 599–610 (2015). https://doi.org/10.1016/j.rser.2014.10.101
Y. Tingting, A. Xiurui, H. Hongxian, C.J. Qianjun, L. Can, Photoelectrocatalytic materials for solar water splitting. Adv. Energy Mater. 8(21), 1800210 (2018). https://doi.org/10.1002/aenm.201800210
X. Zhang, X. Zhao, D. Wu, Y. Jing, Z. Zhou, MnPSe3 monolayer: a promising 2d visible-light photohydrolytic catalyst with high carrier mobility. Adv. Sci. 3(10), 1600062 (2016). https://doi.org/10.1002/advs.201600062
Q. Pei, Y. Song, X. Wang, J. Zou, W. Mi, Superior electronic structure in two-dimensional MnPSe3/MoS2 van der waals heterostructures. Sci. Rep. 7, 9504 (2017). https://doi.org/10.1038/s41598-017-10145-z
N. Gheshlaghi, H.S. Pisheh, H. Ünlü, Composition and strain effects in type i and type ii heterostructure ZnSe/Cd(Zn)S and ZnSe/Cd1−xZnxS core/shell quantum dots. Superlattice Microstruct. 111, 156–165 (2017). https://doi.org/10.1016/j.spmi.2017.06.026
D. Dirk, F. Thomas, O. Ruth, B. Maya, L. Efrat, A.K. Thomas, E. Alexander, Type-I and type-II nanoscale heterostructures based on cdte nanocrystals: a comparative study. Small 4(8), 1148–1152 (2008). https://doi.org/10.1002/smll.200800287
M. Landmann, E. Rauls, W.G. Schmidt, Understanding band alignments in semiconductor heterostructures: composition dependence and type-I–type-II transition of natural band offsets in nonpolar zinc-blende AlxGa1−xN/AlyGa1−yN composites. Phys. Rev. B 95, 155310 (2017). https://doi.org/10.1103/PhysRevB.95.155310
P. Qi, W. Xiaocha, Z. Jijun, M. Wenbo, Efficient band structure modulations in two-dimensional MnPSe3/CrSiTe3 van der waals heterostructures. Nanotechnology 29, 214001 (2018). https://doi.org/10.1088/1361-6528/aab5ab
G. Long, T. Zhang, X. Cai, J. Hu, C.-W. Cho et al., Isolation and characterization of few-layer manganese thiophosphite. ACS Nano 11(11), 11330–11336 (2017). https://doi.org/10.1021/acsnano.7b05856
F. Wang, T.A. Shifa, P. He, Z. Cheng, J. Chu et al., Two-dimensional metal phosphorus trisulfide nanosheet with solar hydrogen-evolving activity. Nano Energy 40, 673–680 (2017). https://doi.org/10.1016/j.nanoen.2017.09.017
C. Zhongzhou, S.T. Ahmed, W. Fengmei, G. Yi, H. Peng, Z. Kai, J. Chao, L. Quanlin, H. Jun, High-yield production of monolayer FePS3 quantum sheets via chemical exfoliation for efficient photocatalytic hydrogen evolution. Adv. Mater. 30(26), e1707433 (2018). https://doi.org/10.1002/adma.201707433
H. Bing, H.Y. Hang, MoS2 as a co-catalyst for photocatalytic hydrogen production from water. Energy Sci. Eng. 4(5), 285–304 (2016). https://doi.org/10.1002/ese3.128
A.T. Montoya, E.G. Gillan, Enhanced photocatalytic hydrogen evolution from transition-metal surface-modified TiO2. ACS Omega 3(3), 2947–2955 (2018). https://doi.org/10.1021/acsomega.7b02021
J. Zhang, T. Wang, P. Liu, Z. Liao, S. Liu, X. Zhuang, M. Chen, E. Zschech, X. Feng, Efficient hydrogen production on moni4 electrocatalysts with fast water dissociation kinetics. Nat. Commun. 8, 15437 (2017). https://doi.org/10.1038/ncomms15437
R.N. Jenjeti, M.P. Austeria, S. Sampath, Alternate to molybdenum disulfide: a 2d, few-layer transition-metal thiophosphate and its hydrogen evolution reaction activity over a wide pH range. ChemElectroChem 3(9), 1392–1399 (2016). https://doi.org/10.1002/celc.201600235
C.C. Mayorga-Martinez, Z. Sofer, D. Sedmidubsky, S. Huber, A.Y.S. Eng, M. Pumera, Layered metal thiophosphite materials: magnetic, electrochemical, and electronic properties. ACS Appl. Mater. Interfaces 9(14), 12563–12573 (2017). https://doi.org/10.1021/acsami.6b16553
E.J. Popczun, J.R. McKone, C.G. Read, A.J. Biacchi, A.M. Wiltrout, N.S. Lewis, R.E. Schaak, Nanostructured nickel phosphide as an electrocatalyst for the hydrogen evolution reaction. J. Am. Chem. Soc. 135(25), 9267–9270 (2013). https://doi.org/10.1021/ja403440e
P. Xiao, M.A. Sk, L. Thia, X. Ge, R.J. Lim, J.-Y. Wang, K.H. Lim, X. Wang, Molybdenum phosphide as an efficient electrocatalyst for the hydrogen evolution reaction. Energy Environ. Sci. 7(8), 2624–2629 (2014). https://doi.org/10.1039/C4EE00957F
D. Mukherjee, P.M. Austeria, S. Sampath, Two-dimensional, few-layer phosphochalcogenide, FePS3: a new catalyst for electrochemical hydrogen evolution over wide ph range. ACS Energy Lett. 1(2), 367–372 (2016). https://doi.org/10.1021/acsenergylett.6b00184
K. Li, D. Rakov, W. Zhang, P. Xu, Improving the intrinsic electrocatalytic hydrogen evolution activity of few-layer NiPS3 by cobalt doping. Chem. Commun. 53(58), 8199–8202 (2017). https://doi.org/10.1039/c7cc03173d
B. Song, K. Li, Y. Yin, T. Wu, L. Dang et al., Tuning mixed nickel iron phosphosulfide nanosheet electrocatalysts for enhanced hydrogen and oxygen evolution. ACS Catal. 7(12), 8549–8557 (2017). https://doi.org/10.1021/acscatal.7b02575
S. Giménez, J. Bisquert, Photoelectrochemical Solar Fuel Production: From Basic Principles to Advanced Devices, 1st edn. (Springer, Berlin, 2016), pp. 549–559. https://doi.org/10.1007/978-3-319-29641-8
X. Xiao, C.-T. He, S. Zhao, J. Li, W. Lin, Z. Yuan, Q. Zhang, S. Wang, L. Dai, D. Yu, A general approach to cobalt-based homobimetallic phosphide ultrathin nanosheets for highly efficient oxygen evolution in alkaline media. Energy Environ. Sci. 10(10), 893–899 (2017). https://doi.org/10.1039/C6EE03145E
P. Luo, H. Zhang, L. Liu, Y. Zhang, J. Deng, C. Xu, N. Hu, Y. Wang, Targeted synthesis of unique nickel sulfide (NiS, NiS2) microarchitectures and the applications for the enhanced water splitting system. ACS Appl. Mater. Interfaces 9(3), 2500–2508 (2017). https://doi.org/10.1021/acsami.6b13984
H. Peilei, Y. Xin-Yao, L.X. Wen, Carbon-incorporated nickel-cobalt mixed metal phosphide nanoboxes with enhanced electrocatalytic activity for oxygen evolution. Angew. Chem. Int. Edit. 56(14), 3897–3900 (2017). https://doi.org/10.1002/anie.201612635
F. Song, X. Hu, Exfoliation of layered double hydroxides for enhanced oxygen evolution catalysis. Nat. Commun. 5, 4477 (2014). https://doi.org/10.1038/ncomms5477
A. Michas, F. Andolfatto, M.E.G. Lyons, R. Durand, Gas evolution reactions at conductive metallic oxide electrodes for solid polymer electrolyte water electrolysis. Key Eng. Mater. 72–74, 535–550 (1992)
Q. Liang, L. Zhong, C. Du, Y. Luo, Y. Zheng, S. Li, Q. Yan, Achieving highly efficient electrocatalytic oxygen evolution with ultrathin 2d Fe-doped nickel thiophosphate nanosheets. Nano Energy 47, 257–265 (2018). https://doi.org/10.1016/j.nanoen.2018.02.048
Z.W. Seh, J. Kibsgaard, C.F. Dickens, I.B. Chorkendorff, J.K. Norskov, T.F. Jaramillo, Combining theory and experiment in electrocatalysis: insights into materials design. Science 355(6321), eaad4998 (2017). https://doi.org/10.1126/science.aad4998
C.-F. Du, K.N. Dinh, Q. Liang, Y. Zheng, Y. Luo, J. Zhang, Q. Yan, Self-assemble and in situ formation of Ni1−xFexPS3 nanomosaic-decorated Mxene hybrids for overall water splitting. Adv. Energy Mater. (2018). https://doi.org/10.1002/aenm.201801127
D. Xiong, X. Wang, W. Li, L. Liu, Facile synthesis of iron phosphide nanorods for efficient and durable electrochemical oxygen evolution. Chem. Commun. 52(56), 8711–8714 (2016). https://doi.org/10.1039/C6CC04151E
D. Li, H. Baydoun, C.N. Verani, S.L. Brock, Efficient water oxidation using CoMnP nanoparticles. J. Am. Chem. Soc. 138(12), 4006–4009 (2016). https://doi.org/10.1021/jacs.6b01543
K.N. Dinh, P. Zheng, Z. Dai, Y. Zhang, R. Dangol, Y. Zheng, B. Li, Y. Zong, Q. Yan, Ultrathin porous nifev ternary layer hydroxide nanosheets as a highly efficient bifunctional electrocatalyst for overall water splitting. Small 14(8), 1703257 (2017). https://doi.org/10.1002/smll.201703257
L.-A. Stern, L. Feng, F. Song, X. Hu, Ni2P as a Janus catalyst for water splitting: the oxygen evolution activity of Ni2P nanoparticles. Energy Environ. Sci. 8(8), 2347–2351 (2015). https://doi.org/10.1039/C5EE01155H
Acknowledgements
The authors gratefully acknowledge Singapore Singapore MOE Tier 2 MOE2017-T2-2-069, MOE AcRF Tier 1 under Grant Nos. RG113/15 and 2016-T1-002-065, Singapore EMA Project EIRP 12/NRF2015EWT-EIRP002-008, and National Research Foundation of Singapore (NRF) Investigatorship Award No. NRF2016NRF-NRFI001-22, National Research Foundation of Singapore (NRF) Investigatorship Award No. NRF2016NRF-NRFI001-22.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Du, CF., Liang, Q., Dangol, R. et al. Layered Trichalcogenidophosphate: A New Catalyst Family for Water Splitting. Nano-Micro Lett. 10, 67 (2018). https://doi.org/10.1007/s40820-018-0220-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40820-018-0220-6