Highlights
-
Pore size and graphitization engineering of carbon cathode were orientated-designed by regulating the molar ratios of Zn/Co ions.
-
Zn90Co10-APC and its assembled PLG//Zn90Co10-APC LIC both deliver the excellent electrochemical performances.
Abstract
The lack of methods to modulate intrinsic textures of carbon cathode has seriously hindered the revelation of in-depth relationship between inherent natures and capacitive behaviors, limiting the advancement of lithium ion capacitors (LICs). Here, an orientated-designed pore size distribution (range from 0.5 to 200 nm) and graphitization engineering strategy of carbon materials through regulating molar ratios of Zn/Co ions has been proposed, which provides an effective platform to deeply evaluate the capacitive behaviors of carbon cathode. Significantly, after the systematical analysis cooperating with experimental result and density functional theory calculation, it is uncovered that the size of solvated PF6− ion is about 1.5 nm. Moreover, the capacitive behaviors of carbon cathode could be enhanced attributed to the controlled pore size of 1.5–3 nm. Triggered with synergistic effect of graphitization and appropriate pore size distribution, optimized carbon cathode (Zn90Co10-APC) displays excellent capacitive performances with a reversible specific capacity of ~ 50 mAh g−1 at a current density of 5 A g−1. Furthermore, the assembly pre-lithiated graphite (PLG)//Zn90Co10-APC LIC could deliver a large energy density of 108 Wh kg−1 and a high power density of 150,000 W kg−1 as well as excellent long-term ability with 10,000 cycles. This elaborate work might shed light on the intensive understanding of the improved capacitive behavior in LiPF6 electrolyte and provide a feasible principle for elaborate fabrication of carbon cathodes for LIC systems.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
Lithium ion capacitor (LIC) is assembled by a battery-type anode and a capacitor-type cathode in a Li-salt electrolyte, elaborately combining the merits of high energy/power densities and long cycle life [1,2,3,4]. Nevertheless, the current electrochemcial performances of LICs are unsatisfactory, which are limited by the kinetic discrepancy between the sluggish intercalation/deintercalation mechanism of anode and fast adsorption/desorption behavior of cathode [5,6,7]. At the present time, enormous endeavors have been put into the researches for improving electrochemical kinetics of lithium intercalated/deintercalated behavior of carbon anodes [8,9,10]. It must be noticeable that energy/power densities of LICs could be influenced by the electrochemical performances of cathode, due to the equation of 1/Ccell = 1/Canode + 1/Ccathode [11]. Therefore, the fabrication of high-performance carbon cathode is the crucial step for development of LICs. However, limited by uncontrolled intrinsic textures, the desired carbon cathodes could be hardly engineered. For example, however the widely used activated carbon (AC) cathodes (e.g., YP-50) have relatively large specific surface area (~ 1500 m2 g−1), delivering unfavorable specific capacity (< 40 mAh g−1). The presence of this dissatisfactory circumstance is ascribed to the narrow microporosity of AC, which brings about the inefficiently storage of solvated PF6− ions [12]. Moreover, the low specific capacity exacerbates the difficulty of electrode fabrication, seriously hindering the improvement of LICs [13, 14]. To tackle this encountered problem, surface functionalization process has been implemented, which effectively improves the specific capacitance of commercial AC powder [15]. Furthermore, involving the pseudocapacitance reaction to carbon electrodes by heteroatom-doping method is a feasible strategy for promoting fast reaction kinetics and providing the additional capacity [16,17,18]. However, these aspects are not considered as the crucial factors for determining the intrinsic electrochemical performances of electric double-layer capacitors (EDLCs) [19].
It is well known that the energy storage mechanism of EDLCs is governed by ion electrosorption at the electrode/electrolyte surface and the electrochemical performances of EDLCs are mainly depended on the porous characteristics [20]. Thus, an appropriate pore size has been identified as a crucial parameter for boosting the electrochemical performance of EDLCs [21]. Generally, when the pore size of carbon matches with the solvated ion size, the maximized capacitance could be obtained. As a result, the optimization of pore size for carbon has been accounted as the key point to enhance the capacitance of EDLCs [22,23,24]. In addition, the graphitization also plays a vital role for increasing the capacitance of carbon materials, resulted from a high degree of electronic conductivity, which is difficultly adjusted [25]. Thus, a convenient and effective strategy for directionally adjusting pore size and graphitization of carbon materials should be urgently explored, which is beneficial to provide a fundamental outstanding in capacitive behavior. Nowadays, extensive research efforts have been dedicated to optimize the energy density of supercapacitor in tetraethylammonium tetrafluoroborate and ionic liquid electrolytes [26, 27]. Nevertheless, the capacitive behaviors of carbon materials in LiPF6 electrolyte have been rarely studied, limiting the progress of LICs. Hence, it is necessary to comprehensively explore the in-depth correlation between the micro-structure characteristics (including pore size dispersion and graphitization) and capacitive behavior of the carbon cathode, which could provide guidelines about improvement of LICs.
Zeolite imidazole frameworks (ZIFs), a well-known subfamily of metal–organic frameworks (MOFs), are constructed from the well-defined metal ions/clusters and organic ligands [28,29,30,31]. Due to the intrinsic merits of the highly ordered and adjustable structure, ZIFs have been chosen as an ideal sacrificial precursor for purposefully fabricating the carbon materials with diversified peculiarities [32,33,34,35]. In view of the above-mentioned considerations, aiming at the optimization of natures of carbon cathodes, MOF-derived carbon materials with different pore size distribution and graphitization have been orientated-engineered by regulating the molar ratios of Zn/Co ions. After the systematical analysis through the collaborating with experimental result and DFT calculation, attributed to the presence of suitable pore size (1.5–3 nm), the capacitive behaviors of carbon materials could be enhanced on account of the strong adsorption/desorption of solvated PF6− ions. And the rate ability of carbon cathode could be boosted by improving the graphitization degree accompanied with enhanced electronic conductivity. Moreover, the improved graphitization and meso/macroporosities are beneficial for boosting surface-induced capacitive behavior of carbon cathode. Significantly, the engineered Zn90Co10-APC possesses the prominent natures combing the desired graphitization degree and appropriate pore size distribution, delivering superior electrochemical performances. This work provides a feasible strategy to regulate the micro-structure of carbon materials and benefits the deep understanding of the capacitive behaviors of carbon cathode affected by the pore size as well as graphitization, greatly promoting the electrochemical performance of LICs.
2 Experimental Section
2.1 Materials and Methods
2.1.1 Preparation of ZnxCo100−x–ZIFs
For the synthesis of mono-metal-ZIFs (ZIF-8 (Zn100-ZIF) or ZIF-67 (Co100-ZIF)): Zn(NO3)2·6H2O (3 mmol, 891 mg) or Co(NO3)2·6H2O (3 mmol, 873 mg) was dissolved in 30 mL methanol, respectively. Then, 2-methylimidazole (984 mg, 12 mmol) was dissolved in another 30 mL methanol. Then, the later solution was added to the former solution and stirred. After a few minutes, the consequent solution was kept for 24 h. Finally, the obtained product was washed with methanol and then dried at 80 °C under vacuum.
For the synthesis of bimetal-ZIFs: The preparation process was similar as method above but by regulating the molar ratio of Zn(NO3)2·6H2O and Co(NO3)2·6H2O. Thus, Zn75Co25-ZIF, Zn50Co50-ZIF and Zn25Co75-ZIF were obtained with the different Zn/Co radios (3:1, 1:1, and 1:3), respectively.
Note x represents the proportion of Zn element in ZnxCo100−x–ZIFs.
2.1.2 Preparation of ZnxCo100−x–PCs
ZnxCo100−x–ZIFs were heat-treated in a tube furnace under an argon flow at 800 °C for 2 h with a heating rate of 10 °C min−1 and then cooled down to room temperature. In order to remove the residual metal impurities, the obtained products were washed with thoroughly HF solution and distilled water. The sample was finally dried under vacuum at 100 °C for 24 h, which was correspondingly labeled as ZnxCo100−x–porous carbons (ZnxCo100−x–PCs), respectively.
2.1.3 Fabrication of ZnxCo100−x–APCs
As-prepared ZnxCo100−x–PCs were thoroughly mixed with KOH in a mass ratio of 1:1. The mixture was further annealed at 800 °C for 1 h under argon atmosphere with a heating rate of 10 °C min−1. The calcined samples were washed with diluted HCl and distilled water. The obtained specimen was dried under vacuum at 100 °C for 24 h, which were correspondingly labeled as ZnxCo100−x–APCs, respectively.
2.2 Materials Characterization
The structural information of the obtained samples was characterized by using a powder X-ray diffractometer (XRD, Rigaku) equipped with a Cu-Kα radiation of 0.15418 nm, and Raman spectra were recorded by using Raman spectrometer (DXR, Thermo-Fisher Scientific). N2 absorption/desorption isotherms were collected by Micromeritics ASAP 2020 instrument, and the pore size distributions of samples were calculated by non-local density functional theory (NLDFT) method. Moreover, an X-ray photoelectron spectroscopy (XPS, VG Multi Lab 2000 system) was carried out for analyzing the compositions of the products. The surface morphology and inner structure were detected by scanning electron microscopy (SEM, Hitachi S-4800) and high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM, Titan G2 60-300). Electronic conductivity is reciprocal of electronic resistivity, and electronic resistivity of carbon membrane was carried out at room temperature under 0.55 T magnetic field using the van der Pauw method by the Hall measurement (ECOPIA HMS 3000). Moreover, the carbon membrane was prepared with grinding apparatus by using the powder compressing machine under the 10 MPa.
2.3 Electrochemical Measurements
The MOF-derived carbon cathodes were prepared by mixing 80 wt% active materials (ZnxCo100−x–PCs and ZnxCo100−x–APCs), 10 wt% binder polyvinylidene fluoride (PVDF), and 10 wt% conductive carbon (Super P) in N-methyl pyrrolidinone (NMP). Afterward, the resulting mixtures were coated on an aluminum foil and the as-obtained electrodes were dried at 80 °C for 12 h in a vacuum box. Meanwhile, the commercial graphite anode was acquired by the similar method as the cathode. The mixed slurries were consisted of the 70 wt% active material, 15 wt% binder carboxymethyl cellulose, and 15 wt% conductive carbon (Super P) in deionized water, which were subsequently bushed on a copper foil.
The half-cells of working electrodes (both the anode and cathode) were assembled into a series of CR2016-type coins in the Braun glovebox with high-purity argon atmosphere. The lithium metal was used as the counter and reference electrode, and a Whatman GF/C glass fiber membrane was utilized the separator. Moreover, 1 mol L−1 LiPF6 solution in ethylene carbonate (EC) and dimethyl carbonate (DMC) (1:1, v/v) with 5 wt% fluoroethylene carbonate was severed as the electrolyte. The graphite anode was cycled for 5 cycles in a half-cell versus Li/Li+ under 0.1 A g−1, which is beneficial for assembling the LICs.
All electrochemical measurements were measured at room temperature. Cyclic voltammetry (CV) curves with various scan rates and electrochemical impedance spectra (EIS) were measured by a MULTI AUTOLAB M204 (MAC90086). Galvanostatic charge/discharge (GCD) surveys were recorded on an Arbin BT2000 instrument at diverse current densities within an appropriate voltage window. Cycle-life tests for half-cells and LICs were recorded on a battery system (Land CT2001A model).
The specific capacitance (C, F g−1), energy density (E, W h kg−1), and power density (P, W kg−1) of LICs, based on the GCD measurements, can be calculated according to Eqs. 1–3:
where Vmax (V) and Vmin (V) are the maximum and minimum discharge potentials, ΔV (V) is the potential change, I (A) is the discharge current, t (s) is the discharge time, and m (g) is the total mass of active material in both anode and cathode.
2.4 DFT Calculations
The DFT calculations were calculated for the solvated structures of PF6− ion by EC and DMC molecules, utilizing the Perdew–Burke–Ernzerhof (PBE) exchange–correlation functional within the framework of generalized gradient approximation (GGA). The numerical foundational settings were employed for valid computation of wave functions. Moreover, the analytical foundational set functions spend longer than numerical foundational settings. Furthermore, the architectonic optimization of the solvation structures and their energies were obtained by the triple-numerical polarization (TNP) foundational settings (one atomic orbital (AO) for each occupied atomic orbital, the second and the third settings of valence AO’s, d-functions for non-hydrogen atoms, and p-functions on hydrogen atoms). The combination of the functional and the foundational settings as GGA-PBE/TNP was referred in this system. The calculation for the PF6− ion solvation was achieved in the gas phase without the presence of the counter cation Li+. All atomic positions were refined during the optimization procedure.
3 Results and Discussions
3.1 Characterization and Morphology
It is well known that ZIF-8 and ZIF-67 are isologues, which are fabricated by the reactions of 2-methyl imidazole with zinc and cobalt ions, respectively [36]. Moreover, the bimetallic ZIFs obtained by controlling the molar ratios of zinc to cobalt ions (Zn2+/Co2+) have been deduced to possess the same crystalline state as monometallic ZIF [37,38,39]. The as-prepared ZnxCo100−x–ZIFs have been firstly characterized by XRD measurements. As shown in Fig. S1, the samples exhibit the same XRD peaks, which certifies that the high phase purity and same topological structure. The experimental XRD pictures of ZnxCo100−x–ZIFs are almost the same, which are identical to the corresponding computer-simulated pattern, indicating the isomorphism of ZnxCo100−x–ZIFs. As shown in Fig. 1a, two obvious peaks are centered at ~ 25° and ~ 44° which are ascribed to the (002) and (100) planes of carbon, respectively [40, 41]. Due to the broad diffraction peaks with low densities, Zn100-PC manifests mainly amorphous characteristic in nature [42,43,44]. On the other aspect, the full-width at half maximum of the (002) peak of Co100-PC becomes narrow, attributed to remarkable graphitization effect of cobalt species triggered by the partially filled 3d orbitals [45,46,47]. Furthermore, as the proportion of cobalt ions increases, the crystallinities of ZnxCo100−x–PCs are gradually improved. Significantly, it is noted that ZnxCo100−x–APCs also show the high graphitization degrees even after KOH chemical activation (Fig. 1b). To further verify the graphitization degree of carbon materials, the Raman spectra of ZnxCo100−x–PCs and ZnxCo100−x–APCs are recorded. As shown in Fig. 1c, d, two characteristic peaks are centered at around 1350 and 1585 cm−1, respectively, corresponding to D bands (disorder-induced carbon) and G-bands (graphitized carbon) [48,49,50]. The relative ID/IG ratios are 1.46, 1.34, 1.27, 1.15, and 1.05 for Zn100-PC, Zn75Co25-PC, Zn50Co50-PC, Zn25Co75-PC, and Co100-PC, demonstrating that the graphitization degree of ZnxCo100−x–PCs could be enhanced as the proportion of cobalt ions. Meanwhile, the ID/IG values for the ZnxCo100−x–APCs are 1.86 (Zn100-APC), 1.51 (Zn75Co25-APC), 1.37 (Zn50Co50-APC), 1.31 (Zn25Co75-APC), and 1.24 (Co100-APC), respectively. Moreover, the electronic conductivities of Zn100-PC, Zn75Co25-PC, Zn50Co50-PC, Zn25Co75-PC, and Co100-PC samples are about 0.10 S cm−1, 1.12 S cm−1, 5.42 S cm−1, 8.70 S cm−1, and 12.5 S cm−1. And, the electronic conductivities of Zn100-APC, Zn75Co25-APC, Zn50Co50-APC, Zn25Co75-APC, and Co100-APC samples are approximately 0.05, 0.89, 4.20, 6.70, and 9.50 S cm−1, respectively. The results above clearly demonstrate the enhancement of the electronic conductivity stems from the gradually increscent graphitization degree. Therefore, the graphitization degree of carbon materials could be adjusted by regulating the molar ratio of Zn/Co ions.
The porous features of ZnxCo100−x–PCs and ZnxCo100−x–APCs have been explored by N2 adsorption–desorption isothermal analyses at 77 K, which are summarized in Table 1. As displayed in Fig. 2a, it is obvious that the curve of Zn100-PC presents the classical type I, which illustrates the dominant micropore structure, resulted from the leave of Zn vapor at relatively high temperature [51, 52]. It is noteworthy that the typical type H3 hysteresis loop within the P/P0 range of 0.45-1.0 becomes gradually wider as the increased proportion of cobalt source, revealing the existence of meso-/macro-pores with a broad size distribution [53]. This phenomenon mainly is attributed to removal of Co species on the carbon substance. It is found that the BET specific surface areas are gradually decreased in order of Zn100-PC (957 m2 g−1) > Zn75Co25-PC (524 m2 g−1) > Zn50Co50-PC (370 m2 g−1) > Zn25Co75-PC (367 m2 g−1) > Co100-PC (332 m2 g−1). The results above show that carbon structure with different surface area and pore size can be designed by adjusting the molar ratio of Zn/Co ions. It is all known that KOH chemical activation could enlarge the BET specific surface area and change the porosity characteristic of carbon material [54,55,56,57]. Thus, it is obvious that ZnxCo100−x–APCs exhibit the hierarchical porous structures with enlarged specific surface areas and abundant meso-/macro-porosities (Fig. 2b). In addition, Fig. 2c, d shows the pore size distributions of all samples. In order to further assess the difference in pore size distribution, the normalized cumulative pore size distributions of ZnxCo100−x–PCs and ZnxCo100−x–APCs have been carefully analyzed (Fig. 2e, f). And, the comparison of normalized cumulative pore volume could offer a direct evidence for assessing the change of pore features [58]. Generally, often-used volume weighted average pore size d50 does not fully represent the pore size distribution width. Thus, d25 and d75, serving as the pore width encompassing 25% and 75% of the total pore volume, are added for showing the comprehensive distribution width of carbon materials, respectively. Significantly, the comprehensive pore distribution is anticipated to provide an important parameter to analyze the relationship between pore size distribution and capacitive behavior of carbon cathode in the later content.
In order to intuitively observe the changes of morphologies and porous structures, the SEM and HRTEM images of Zn100-PC, Co100-PC, Zn100-APC, and Co100-APC are displayed in Fig. 3. The above samples manifest rhombic dodecahedral shape. Significantly, it is found that Zn100-PC distinctly is the amorphous characteristic with dominated microporous feature and Co100-PC manifests the graphitized carbon layers with prominent meso-/macro-porosities. Furthermore, the graphitic ribbons with 0.34 nm lattice fringes are noticed [59]. Meanwhile, after KOH chemical activation, Zn100-APC obviously possesses the meso-/macro-porosities and Co100-APC exhibits the uniform and shrunken meso-/macro-pores. These discussed results are well consistent with the above-mentioned analyzed results of XRD, Raman and porosity.
3.2 Electrochemical Performance of Carbon Cathode
To evaluate the adsorption/desorption of the solvated anion (PF6−) behaviors of the obtained specimens as the cathodes of LICs, the half-cell tests versus lithium metal have been investigated within the potential range of 2.0–4.5 V. As shown in Fig. 4a-d, rate performances of ZnxCo100−x–PCs and ZnxCo100−x–APCs at various current densities are presented. Moreover, the corresponding coulombic efficiencies have been shown in Figs. S2 and S3. It is noticed that Zn100-PC possesses the worst electrochemical performances among the ZnxCo100−x–PCs, only delivering 15 mAh g−1 at 0.1 A g−1. Although featured with relatively large BET specific surface area, the electrochemical properties of Zn100-PC are seriously restricted by the narrow and inappropriate pore characteristics [60]. Specially, prominent microporous characteristic of Zn100-PC (80% microporous volume proportion) has been presented. On the contrary, although possessing the relatively low BET specific surface area, the specific capacity of Co100-PC could be reached up to 40 mAh g−1, resulted from the abundant meso-/macro-porosities. Combining with Fig. 2e, f, Co100-PC possesses suitable pore size range (d50 = 2.07 nm ~ d75 = 27.27 nm), resulting in the strong adsorption/desorption behaviors of solvated PF6− ion. The results above demonstrate that the adsorption/desorption of the solvated anion (PF6−) behaviors are mainly determined by the pore sizes of carbon materials and an appropriate pore size is more crucial than a high surface area in order to obtain high values of capacitance. Interestingly, after KOH chemical activation, Zn100-APC with enhanced electrochemical performances delivers a reversible specific capacity of 55 mAh g−1 at 0.1 A g−1, whereas the electrochemical performances of Co100-APC are obviously decreased. The results above illustrate that the electrochemical performances of Zn100-APC and Co100-APC are affected by the changed pore size distributions. It is found that the microporous volume proportion of Zn100-APC decreased to about 49%, and d50 and d75 of Zn100-APC are increased up to 2.12 and 2.64 nm, respectively, revealing the enlarged pore size distribution is beneficial for the adsorption/desorption of solvated PF6− ion. In addition, the d50 of Co100-APC have changed to 6.71 nm and the reduced electrochemical performances of Co100-APC are attributed to the less porosity of about 2 nm. Meanwhile, d25 (10.06 nm), d50 (33.75 nm), and d75 (51.60 nm) of Zn75Co25-PC are altered to 2.11, 2.96, and 17.37 nm after chemical activation. Because of the increased pore volume proportion in 2 ~ 3 nm, the electrochemical performance of Zn75Co25-APC has been significantly improved. The above-mentioned results demonstrate that 2 ~ 3 nm pore size could bring out the strong adsorption/desorption behavior of solvated PF6− ions. Moreover, it is obvious that the rate performances of carbon materials derived from ZnxCo100−x–ZIFs with relatively high Co content could be boosted, resulting from the graphitization effect accompanied with enhanced electronic conductivity [61]. Furthermore, the XPS measurements have been carried out to verify the effect on capacity of N species. The XPS survey spectra and the elemental contents of ZnxCo100−x–PCs and ZnxCo100−x–APCs are presented in Fig. S4 and Table S1, respectively. The results demonstrate that ZnxCo100−x–APCs almost exhibit the similar chemical environment, which could further highlight the effect of pore sizes of carbon materials for the capacity contribution. In addition, Zn100-PC with relatively high N contents of 20.59% possesses the dissatisfactory electrochemical performances, which illustrates that the N-doping effect is not preponderant in the capacity contribution and the appropriate pore size plays the vital role in the high capacity.
In order to better understand the adsorption/desorption behavior of the obtained material for solvated PF6− ion, kinetic analysis based on CV measurements with different scan rates range from 1 to 50 mV s−1 is carried out (Figs. S5 and S6). The CV curves of ZnxCo100−x–PCs and ZnxCo100−x–APCs at different scan rates show a quasi-rectangular shape with slight deformation, illustrating a dominant electric double-layer behavior with pseudocapacitance contribution. In addition, the CV curves of ZnxCo100−x–PCs and ZnxCo100−x–APCs show the unobvious deformation at the high scan rate as the proportion of cobalt ions increases, attributing to the graphitic crystallization with enhanced electron transfer. Generally, two types of charge-storage mechanisms are widely discussed, namely the surface-induced capacitive behavior and the diffusion-controlled process [62, 63]. The surface-induced capacitive behavior includes the faradaic behavior from the surface redox reaction and the electrical double-layer behavior from ion adsorption/desorption. The diffusion-controlled process is primarily originated from insertion of electrolyte ions. The peak current (i) and the scan rate (ν) follow the power law, which are shown in Eqs. 4 and 5 [64,65,66]:
where a and b stand for variable parameters. Importantly, on account of the b-value, the different electrochemical storage behavior can be classified. When b-value is close to 0.5, it indicates the dominating diffusion-controlled process. On the contrary, when the b-value is near 1, the storage capacity mostly originates from the surface-induced capacitive process. Figure 5a, b shows the fitted lines of ZnxCo100−x–PCs and ZnxCo100−x–APCs derived from the anodic peaks located 3.25 V and the corresponding b-values are calculated. The b-value of Zn100-PC, Zn75Co25-PC, Zn50Co50-PC, Zn25Co75-PC, and Co100-PC is 0.73, 0.75, 0.80, 0.88, and 0.94, respectively, revealing that the intensive graphitization could boost the surface-induced capacitive kinetics. Importantly, after KOH chemical activation, the b-value of Zn100-APC, Zn75Co25-APC, Zn50Co50-APC, Zn25Co75-APC and Co100-APC is reached up to 0.76, 0.81, 0.94, 1.06, and 1.09, respectively, demonstrating that the surface-induced capacitive behavior could be improved by increasing meso/macroporosities. The results above illustrate that increased electronic conductivity triggered by graphitization and rapid ion transport originated from meso/macroporosities could synergistically boost the surface-induced capacitive behavior. In other words, surface-induced capacitive behavior of carbon material could be promoted by enhancing the graphitization and meso/macroporosities.
As shown in Figs. S7 and S8, the Nyquist plots consisted of an intercept of the real axis about Rs (the resistance of materials in the cell, containing electrode, electrolyte, and separation), a semicircle in middle–high-frequency about Rct (the resistance of charge transfer) and a sloping straight line in low frequency about ZW (corresponding to the capacitive behavior linked with the PF6− ion adsorption in the whole porous carbon network) [67,68,69]. Moreover, it is obvious that the diameter of the semicircle at medium–high-frequency region decreases as there is an increase in potential from 2 to 4.5 V, showing the occurrence of the absorption of PF6− anion on the surface of electrode material, which can enhance the electronic conductivity (Fig. 5c). The σW values can be obtained from the slope of the Z′ and ω−1/2 plot in the Warburg region, which could estimate the PF6− transfer. The enlargement of the graphitization degree with the proportion of cobalt ions could reduce the σW value, attributing to the enhancement of the electronic conductivity. Moreover, after 100 cycles at 0.1 A g−1, Rct and σW values of ZnxCo100−x–PCs and ZnxCo100−x–APCs are increased under different open-circuit voltages, which indicates the deteriorated performance, resulted from the destroyed structures of electrode materials.
3.3 Theoretical Calculation and Analysis of Solvated PF6 − Ion
The DFT calculations have been performed to gain insight into the optimal structure of solvated PF6− ion. The solvation structures of PF6− ion have been firstly examined in EC molecules [70,71,72]. The optimized structures for PF6−(EC)i (i = 1, 2, 4, 6) have been present in Fig. 6a-d, respectively. In view of the asymmetric nature of the EC molecule, the position of the methyl group was switched prior to each optimization until the lowest energy solvation structure was found. Moreover, the solvation energy (ΔEsolv) has been calculated by Eq. 6:
where E[PF6−(EC)i] represents the electronic energy for PF6−(EC)i, E[PF6−] represents the electronic energy for the PF6− ion, E[EC] represents the electronic energy for the solvent EC molecule, and i is the solvation number. Table S2 lists the specific calculated values of solvation energies of PF6−(EC)i structures, and Fig. 6e shows the variation tendency of solvation energy as a function of the solvation number. Importantly, it is found that the solvation process of PF6− ion accompanying with EC is spontaneous and the PF6−(EC)6 possesses the lowest solvation energy of − 71.84 kcal mol−1. Meanwhile, the DMC molecule has also been examined for the solvation structures of PF6− ion and the related solvation energies of PF6−(DMC)i structures are listed in Fig. S9 and Table S3. Note that the EC molecule is inclined to combine with PF6− ion to form the stable solvation structure and the PF6−(EC)6 is the optimized solvation structure. Thus, the optimized solvation structure of PF6−(EC)6 mainly exists in the 1 mol L−1 LiPF6 solution system (EC and DMC (1:1, v/v) with 5 wt% FEC) and the size of PF6−(EC)6 structure is about 1.5 nm [73]. The DFT calculation greatly supports the experimental results above, which reveals that the pores smaller than solvated PF6− ions size of about 1.5 nm are inaccessible for energy storage and the pore size of carbon substantially becomes larger than the size of solvated PF6− ions to adequately accommodate diffuse charge layers. Moreover, in consideration of the compact layers from adjacent pore walls, the pores lower than twice the size of the solvated PF6− ions could bring out desired capacitive performances (Fig. 6f). In summary, on the basis of DFT calculations, 1.5 ~ 3 nm pore size could trigger strong adsorption/desorption behavior of solvated PF6− ions, which is well consistent with experimental results above.
3.4 Electrochemical Performance of LICs
In considerations of the results above, through the ingenious incorporation of high graphitization and appropriate pore size distribution, desired carbon cathode could be reasonably engineered and Zn90Co10-APC has been elaborately designed (Figs. 7 and S10). Thanks to the synergistic effect of graphitization and appropriate pore size distribution, Zn90Co10-APC exhibits the most outstanding adsorption/desorption behavior of solvated PF6− ions among the as-prepared carbon samples (Fig. 8 and Table 1). Zn90Co10-APC shows a high specific capacity of ~ 100 mAh g−1 at the current density of 0.1 A g−1 and could still retain 50 mAh g−1 even at the high current density of 5 A g−1, showing an excellent rate capability. Generally, commercialize LICs are generally composed of graphite anode and AC cathode. The theoretical capacity of graphite anode is 372 mAh g−1, and the detailed electrochemical performances have been recorded (Fig. S11). In order to evaluate the superiority of Zn90Co10-APC sample as the cathode, the pre-lithiated graphite (PLG) as anode of LIC has been utilized in this work and the related schematic illustration of the charge-storage mechanisms is shown in Fig. 9a. As shown in Fig. 9b, c, the ideal rectangular shape CV curves with slight deviations are observed and the slopes of GCD profiles are not strictly linear with unobvious distortion, demonstrating the collaboration of two types of charge-storage mechanisms (faradaic and non-faradaic behaviors) [74,75,76]. The specific capacitances (based on the total mass of cathode and anode) of PLG//Zn90Co10-APC LIC are 65.1, 62.9, 57.6, 51.7, 44.1, and 30.55 F g−1 at the current densities of 0.1, 0.2, 0.5, 1, 2, and 5 A g−1, respectively. Notably, PLG//Zn90Co10-APC LIC presents the high energy density of 108 Wh kg−1 at power density of 300 W kg−1. The energy density could still maintain 51 Wh kg−1 at a relatively high power density of 15,000 W kg−1. Moreover, as shown in Figs. 9d and S12, the PLG//Zn90Co10-APC LIC presents superior energy/power characteristics compared to other previously reported LICs, such as Li4Ti5O12-graphene//AC [77], TiO2-x/CNT//AC/CNT [78], T-Nb2O5@C//MSP-20 [79], CoMoS4//FCS [80], MoSe2//AC [81], Fe3O4@C//a-EW-NaCl [82], and CNF//PANi@CNF-10 [83], and PLG//AC. Significantly, the PLG//Zn90Co10-APC LIC exhibits the good long-term ability with 10,000 cycles in the potential window of 2.0-4.0 V (Fig. S13). Moreover, in consideration of the potential drop (ΔV) originated from the GCD curves during the cyclic process, the potential drop of PLG//AC LIC is increased up to 1.4 V, which is much larger than that of PLG//Zn90Co10-APC LIC, further revealing the PLG//Zn90Co10-APC LIC possesses better long-term ability compared to PLG//AC LIC (Fig. S14). This study is anticipated to offer an in-depth understanding of capacitive behavior of carbon cathode in LiPF6 electrolyte and afford more possibilities for directionally fabricating desired carbon cathode of high-performance LICs.
4 Conclusion
In this work, an orientated-designed pore size and graphitization engineering strategy of the carbon materials based on ZIFs has been successfully developed, greatly promoting comprehensive exploration of the relationship between the intrinsic features and capacitive behaviors of carbon cathodes. Meaningfully, it is found that an appropriate pore size is more important than a high surface area for enhanced capacity and the suitable pore sizes of 1.5 ~ 3 nm could match well with the solvated PF6− ion, bringing out the strong adsorption/desorption behavior. Significantly, in the LiPF6 electrolyte, the rate ability could be improved by enhancing the graphitization degree of carbon materials. Furthermore, it is found that the surface-induced capacitive kinetics of carbon could be promoted by enhancing the graphitization and meso/macroporosities. It is found that pore size of 1.5–3 nm could trigger strong adsorption/desorption behavior of solvated PF6− ions according to DFT calculations. Notably, thanks to the synergistic effect of graphitization and appropriate pore size distribution, Zn90Co10-APC shows the most excellent electrochemical performance and the assembly PLG//Zn90Co10-APC LIC exhibits the superior electrochemical performances compared to PLG//AC LIC. This in-depth investigation based on the fundamental understanding of capacitive behavior in LiPF6 electrolyte can offer the directed guidances for the rational design of carbon cathodes for high-performance LICs.
References
J. Ding, W. Hu, E. Paek, D. Mitlin, Review of hybrid ion capacitors: from aqueous to lithium to sodium. Chem. Rev. 118, 6457–6498 (2018). https://doi.org/10.1021/acs.chemrev.8b00116
H. Wang, C. Zhu, D. Chao, Q. Yan, H.J. Fan, Nonaqueous hybrid lithium-ion and sodium-ion capacitors. Adv. Mater. 29, 1702093 (2017). https://doi.org/10.1002/adma.201702093
P. Cai, K. Zou, G. Zou, H. Hou, X. Ji, Quinone/ester-based oxygen functional group-incorporated full carbon Li-ion capacitor for enhanced performance. Nanoscale 12, 3677–3685 (2020). https://doi.org/10.1039/c9nr10339b
L. Zhao, S. Wang, F. Pan, Z. Tang, Z. Zhang, S. Zhong, J. Zhang, Thermal convection induced TiO2 microclews as superior electrode materials for lithium-ion batteries. J. Mater. Chem. A 6, 11688–11693 (2018). https://doi.org/10.1039/C8TA03616K
B. Li, J. Zheng, H. Zhang, L. Jin, D. Yang et al., Electrode materials, electrolytes, and challenges in nonaqueous lithium-ion capacitors. Adv. Mater. 30, 1705670 (2018). https://doi.org/10.1002/adma.201705670
D. Cao, C. Yin, D. Shi, Z. Fu, J. Zhang, C. Li, Cubic perovskite fluoride as open framework cathode for Na-ion batteries. Adv. Funct. Mater. 27, 1701130 (2017). https://doi.org/10.1002/adfm.201701130
Y. Han, J. Hu, C. Yin, Y. Zhang, J. Xie, D. Yin, C. Li, Iron-based fluorides of tetragonal tungsten bronze structure as potential cathodes for Na-ion batteries. J. Mater. Chem. A 4, 7382–7389 (2016). https://doi.org/10.1039/C6TA02061E
Y. Luan, R. Hu, Y. Fang, K. Zhu, K. Cheng et al., Nitrogen and phosphorus dual-doped multilayer graphene as universal anode for full carbon-based lithium and potassium ion capacitors. Nano-Micro Lett. 11, 30 (2019). https://doi.org/10.1007/s40820-019-0260-6
X. Wang, L. Liu, Z. Niu, Carbon-based materials for lithium-ion capacitors. Mater. Chem. Front. 3, 1265–1279 (2019). https://doi.org/10.1039/C9QM00062C
J. Huang, B. Zhao, T. Liu, J. Mou, Z. Jiang, J. Liu, H. Li, M. Liu, Wood-derived materials for advanced electrochemical energy storage devices. Adv. Funct. Mater. 29, 1902255 (2019). https://doi.org/10.1002/adfm.201902255
C. Li, X. Zhang, K. Wang, X. Sun, Y. Ma, High-power and long-life lithium-ion capacitors constructed from N-doped hierarchical carbon nanolayer cathode and mesoporous graphene anode. Carbon 140, 237–248 (2018). https://doi.org/10.1016/j.carbon.2018.08.044
Y. Ma, H. Chang, M. Zhang, Y. Chen, Graphene-based materials for lithium-ion hybrid supercapacitors. Adv. Mater. 27, 5296–5308 (2015). https://doi.org/10.1002/adma.201501622
P. Han, G. Xu, X. Han, J. Zhao, X. Zhou, G. Cui, Lithium ion capacitors in organic electrolyte system: scientific problems, material development, and key technologies. Adv. Energy Mater. 8, 1801243 (2018). https://doi.org/10.1002/aenm.201801243
D. Han, Z. Weng, P. Li, Y. Tao, C. Cui et al., Electrode thickness matching for achieving high-volumetric-performance lithium-ion capacitors. Energy Storage Mater. 18, 133–138 (2019). https://doi.org/10.1016/j.ensm.2019.01.020
C. Liu, B.B. Koyyalamudi, L. Li, S. Emani, C. Wang, L.L. Shaw, Improved capacitive energy storage via surface functionalization of activated carbon as cathodes for lithium ion capacitors. Carbon 109, 163–172 (2016). https://doi.org/10.1016/j.carbon.2016.07.071
K. Zou, P. Cai, C. Liu, J. Li, X. Gao et al., A kinetically well-matched full-carbon sodium-ion capacitor. J. Mater. Chem. A 7, 13540–13549 (2019). https://doi.org/10.1039/C9TA03797G
J. Zhang, W. Lv, D. Zheng, Q. Liang, D.W. Wang, F. Kang, Q.H. Yang, The interplay of oxygen functional groups and folded texture in densified graphene electrodes for compact sodium-ion capacitors. Adv. Energy Mater. 8, 1702395 (2018). https://doi.org/10.1002/aenm.201702395
Q. Xia, H. Yang, M. Wang, M. Yang, Q. Guo, L. Wan, H. Xia, Y. Yu, High energy and high power lithium-ion capacitors based on boron and nitrogen dual-doped 3D carbon nanofibers as both cathode and anode. Adv. Energy Mater. 7, 1701336 (2017). https://doi.org/10.1002/aenm.201701336
P. Simon, Y. Gogotsi, Capacitive energy storage in nanostructured carbon electrolyte systems. Acc. Chem. Res. 46, 1094–1103 (2013). https://doi.org/10.1021/ar200306b
Y. Wang, Y. Song, Y. Xia, Electrochemical capacitors: mechanism, materials, systems, characterization and applications. Chem. Soc. Rev. 45, 5925–5950 (2016). https://doi.org/10.1039/C5CS00580A
J. Chmiola, G. Yushin, Y. Gogotsi, C. Portet, P. Simon, P.L. Taberna, Anomalous increase in carbon capacitance at pore sizes less than 1 nanometer. Science 313, 1760–1763 (2006). https://doi.org/10.1126/science.1132195
C. Largeot, C. Portet, J. Chmiola, P.L. Taberna, Y. Gogotsi, P. Simon, Relation between the ion size and pore size for an electric double-layer capacitor. J. Am. Chem. Soc. 130, 2730–2731 (2008). https://doi.org/10.1021/ja7106178
J. Huang, B.G. Sumpter, V. Meunier, A universal model for nanoporous carbon supercapacitors applicable to diverse pore regimes, carbon materials, and electrolytes. Chem. Eur. J. 14, 6614–6626 (2008). https://doi.org/10.1002/chem.200800639
S. Kondrat, C.R. Pérez, V. Presser, Y. Gogotsi, A.A. Kornyshev, Effect of pore size and its dispersity on the energy storage in nanoporous supercapacitors. Energy Environ. Sci. 5, 6474–6479 (2012). https://doi.org/10.1039/c2ee03092f
D. Weingarth, M. Zeiger, N. Jäckel, M. Aslan, G. Feng, V. Presser, Graphitization as a universal tool to tailor the potential-dependent capacitance of carbon supercapacitors. Adv. Energy Mater. 4, 1400316 (2014). https://doi.org/10.1002/aenm.201400316
R.R. Salunkhe, C. Young, J. Tang, T. Takei, Y. Ide, N. Kobayashi, Y. Yamauchi, A high-performance supercapacitor cell based on ZIF-8-derived nanoporous carbon using an organic electrolyte. Chem. Commun. 52, 4764–4767 (2016). https://doi.org/10.1039/C6CC00413J
Y. Gong, D. Li, C. Luo, Q. Fu, C. Pan, Highly porous graphitic biomass carbon as advanced electrode materials for supercapacitors. Green Chem. 19, 4132–4140 (2017). https://doi.org/10.1039/C7GC01681F
H. Wang, Q.L. Zhu, R. Zou, Q. Xu, Metal-organic frameworks for energy applications. Chem 2, 52–80 (2017). https://doi.org/10.1016/j.chempr.2016.12.002
R.R. Salunkhe, Y.V. Kaneti, J. Kim, J.H. Kim, Y. Yamauchi, Nanoarchitectures for metal-organic framework-derived nanoporous carbons toward supercapacitor applications. Acc. Chem. Res. 49, 2796–2806 (2016). https://doi.org/10.1021/acs.accounts.6b00460
D.M. Chen, J.Y. Tian, Z.W. Wang, C.S. Liu, M. Chen, M. Du, An anionic Na(I)-organic framework platform: separation of organic dyes and post-modification for highly sensitive detection of picric acid. Chem. Commun. 53, 10668–10671 (2017). https://doi.org/10.1039/C7CC06073D
D. Shi, R. Zheng, M.J. Sun, X. Cao, C.X. Sun et al., Semiconductive copper(I)-organic frameworks for efficient light-driven hydrogen generation without additional photosensitizers and cocatalysts. Angew. Chem. Int. Ed. 56, 14637–14641 (2017). https://doi.org/10.1002/anie.201709869
K.Y. Zou, Z.X. Li, Controllable syntheses of MOF-derived materials. Chem. Eur. J. 24, 6506–6518 (2018). https://doi.org/10.1002/chem.201705415
S. Dang, Q.L. Zhu, Q. Xu, Nanomaterials derived from metal-organic frameworks. Nat. Rev. Mater. 3, 17075 (2017). https://doi.org/10.1038/natrevmats.2017.75
Y.V. Kaneti, J. Tang, R.R. Salunkhe, X. Jiang, A. Yu, K.C. Wu, Y. Yamauchi, Nanoarchitectured design of porous materials and nanocomposites from metal-organic frameworks. Adv. Mater. 29, 1604898 (2017). https://doi.org/10.1002/adma.201604898
D. Shi, R. Zheng, C.S. Liu, D.M. Chen, J. Zhao, M. Du, Dual-functionalized mixed keggin- and lindqvist-type Cu24-based POM@MOF for visible-light-driven H2 and O2 Evolution. Inorg. Chem. 58, 7229–7235 (2019). https://doi.org/10.1021/acs.inorgchem.9b00206
J. Tang, R.R. Salunkhe, J. Liu, N.L. Torad, M. Imura, S. Furukawa, Y. Yamauchi, Thermal conversion of core-shell metal-organic frameworks: a new method for selectively functionalized nanoporous hybrid carbon. J. Am. Chem. Soc. 137, 1572–1580 (2015). https://doi.org/10.1021/ja511539a
W. Guo, W. Xia, K. Cai, Y. Wu, B. Qiu, Z. Liang, C. Qu, R. Zou, Kinetic-controlled formation of bimetallic metal-organic framework hybrid structures. Small 13, 1702049 (2017). https://doi.org/10.1002/smll.201702049
C.S. Liu, Z.H. Zhang, M. Chen, H. Zhao, F.H. Duan et al., Pore modulation of zirconium-organic frameworks for high-efficiency detection of trace proteins. Chem. Commun. 53, 3941–3944 (2017). https://doi.org/10.1039/C7CC00029D
D.M. Chen, J.Y. Tian, C.S. Liu, M. Du, A bracket approach to improve the stability and gas sorption performance of a metal-organic framework via in situ incorporating the size-matching molecular building blocks. Chem. Commun. 52, 8413–8416 (2016). https://doi.org/10.1039/C6CC02359B
G. Zou, H. Hou, C.W. Foster, C.E. Banks, T. Guo, Y. Jiang, Y. Zhang, X. Ji, Advanced hierarchical vesicular carbon Co-doped with S, P, N for high-rate sodium storage. Adv. Sci. 5, 1800241 (2018). https://doi.org/10.1002/advs.201800241
H. Hou, C.E. Banks, M. Jing, Y. Zhang, X. Ji, Carbon quantum dots and their derivative 3D porous carbon frameworks for sodium-ion batteries with ultralong cycle life. Adv. Mater. 27, 7861–7866 (2015). https://doi.org/10.1002/adma.201503816
T. Wu, C. Zhang, G. Zou, J. Hu, L. Zhu, X. Cao, H. Hou, X. Ji, The bond evolution mechanism of covalent sulfurized carbon during electrochemical sodium storage process. Sci. China Mater. 62, 1127–1138 (2019). https://doi.org/10.1007/s40843-019-9418-8
Y. Han, P. Qi, S. Li, X. Feng, J. Zhou, H. Li, S. Su, X. Li, B. Wang, A novel anode material derived from organic-coated ZIF-8 nanocomposites with high performance in lithium ion batteries. Chem. Commun. 50, 8057–8060 (2014). https://doi.org/10.1039/C4CC02691H
Z.X. Li, K.Y. Zou, X. Zhang, T. Han, Y. Yang, Hierarchically flower-like N-doped porous carbon materials derived from an explosive 3-fold interpenetrating diamondoid copper metal-organic framework for a supercapacitor. Inorg. Chem. 55, 6552–6562 (2016). https://doi.org/10.1021/acs.inorgchem.6b00746
Z. Wu, Y. Wang, X. Liu, C. Lv, Y. Li, D. Wei, Z. Liu, Carbon-nanomaterial-based flexible batteries for wearable electronics. Adv. Mater. 31, 1800716 (2019). https://doi.org/10.1002/adma.201800716
R. Wang, G. Lu, W. Qiao, J. Yu, Catalytic graphitization of coal-based carbon materials with light rare earth elements. Langmuir 32, 8583–8592 (2016). https://doi.org/10.1021/acs.langmuir.6b02000
D. Ayillath Kutteri, I.W. Wang, A. Samanta, L. Li, J. Hu, Methane decomposition to tip and base grown carbon nanotubes and COx-free H2 over mono-and bimetallic 3d transition metal catalysts. Catal. Sci. Technol. 8, 858-869 (2018). https://doi.org/10.1039/C7CY01927K
W. Zhang, X. Jiang, X. Wang, Y.V. Kaneti, Y. Chen et al., Spontaneous weaving of graphitic carbon networks synthesized by pyrolysis of ZIF-67 crystals. Angew. Chem. Int. Ed. 56, 8435–8440 (2017). https://doi.org/10.1002/anie.201701252
P. Ge, H. Hou, X. Cao, S. Li, G. Zhao, T. Guo, C. Wang, X. Ji, Multidimensional evolution of carbon structures underpinned by temperature-induced intermediate of chloride for sodium-ion batteries. Adv. Sci. 5, 1800080 (2018). https://doi.org/10.1002/advs.201800080
H. Hou, L. Shao, Y. Zhang, G. Zou, J. Chen, X. Ji, Large-area carbon nanosheets doped with phosphorus: a high-performance anode material for sodium-ion batteries. Adv. Sci. 4, 1600243 (2017). https://doi.org/10.1002/advs.201600243
Z. Wu, K. Liu, C. Lv, S. Zhong, Q. Wang et al., Ultrahigh-energy density lithium-ion cable battery based on the carbon-nanotube woven macrofilm. Small 14, 1800414 (2018). https://doi.org/10.1002/smll.201800414
H.J. Peng, G.X. Hao, Z.H. Chu, Y.L. Cui, X.M. Lin, Y.P. Cai, From metal-organic framework to porous carbon polyhedron: toward highly reversible lithium storage. Inorg. Chem. 56, 10007–10012 (2017). https://doi.org/10.1021/acs.inorgchem.7b01539
Q. Wang, W. Xia, W. Guo, L. An, D. Xia, R. Zou, Functional zeolitic-imidazolate-framework-templated porous carbon materials for CO2 capture and enhanced capacitors. Chem. Asian J. 8, 1879–1885 (2013). https://doi.org/10.1002/asia.201300147
M. Ding, W. Shi, L. Guo, Z.Y. Leong, A. Baji, H.Y. Yang, Bimetallic metal-organic framework derived porous carbon nanostructures for high performance membrane capacitive desalination. J. Mater. Chem. A 5, 6113–6121 (2017). https://doi.org/10.1039/C7TA00339K
H. Peng, B. Yao, X. Wei, T. Liu, T. Kou, P. Xiao, Y. Zhang, Y. Li, Pore and heteroatom engineered carbon foams for supercapacitors. Adv. Energy Mater. 9, 1803665 (2019). https://doi.org/10.1002/aenm.201803665
M. Wang, B. Liu, H. Chen, D. Yang, H. Li, N/O codoped porous carbons with layered structure for high-rate performance supercapacitors. ACS Sustain. Chem. Eng. 7, 11219–11227 (2019). https://doi.org/10.1021/acssuschemeng.9b00541
J. Li, H. Wei, Y. Peng, L. Geng, L. Zhu et al., A multifunctional self-healing G-PyB/KCl hydrogel: smart conductive, rapid room-temperature phase-selective gelation, and ultrasensitive detection of alpha-fetoprotein. Chem. Commun. 55, 7922–7925 (2019). https://doi.org/10.1039/C9CC02770J
N. Jäckel, P. Simon, Y. Gogotsi, V. Presser, Increase in capacitance by subnanometer pores in carbon. ACS Energy Lett. 1, 1262–1265 (2016). https://doi.org/10.1021/acsenergylett.6b00516
K.Y. Zou, Y.C. Liu, Y.F. Jiang, C.Y. Yu, M.L. Yue, Z.X. Li, Benzoate acid-dependent lattice dimension of Co-MOFs and MOF-derived CoS2@CNTs with tunable pore diameters for supercapacitors. Inorg. Chem. 56, 6184–6196 (2017). https://doi.org/10.1021/acs.inorgchem.7b00200
R. Wang, D. Jin, Y. Zhang, S. Wang, J. Lang, X. Yan, L. Zhang, Engineering metal organic framework derived 3D nanostructures for high performance hybrid supercapacitors. J. Mater. Chem. A 5, 292–302 (2017). https://doi.org/10.1039/C6TA09143A
H. Ma, H. Geng, B. Yao, M. Wu, C. Li, M. Zhang, F. Chi, L. Qu, Highly ordered graphene solid: an efficient platform for capacitive sodium-ion storage with ultrahigh volumetric capacity and superior rate capability. ACS Nano 13, 9161–9170 (2019). https://doi.org/10.1021/acsnano.9b03492
S. Yang, S. Wang, X. Liu, L. Li, Biomass derived interconnected hierarchical micro-meso-macro-porous carbon with ultrahigh capacitance for supercapacitors. Carbon 147, 540–549 (2019). https://doi.org/10.1016/j.carbon.2019.03.023
C. Chang, M. Li, H. Wang, S. Wang, X. Liu, H. Liu, L. Li, A novel fabrication strategy for doped hierarchical porous biomass-derived carbon with high microporosity for ultrahigh-capacitance supercapacitors. J. Mater. Chem. A 7, 19939–19949 (2019). https://doi.org/10.1039/C9TA06210F
J. Wang, J. Polleux, J. Lim, B. Dunn, Pseudocapacitive contributions to electrochemical energy storage in TiO2 (anatase) nanoparticles. J. Phys. Chem. C 111, 14925–14931 (2007). https://doi.org/10.1021/jp074464w
S. Li, J. Chen, X. Gong, J. Wang, P.S. Lee, Holey graphene-wrapped porous TiNb24O62 microparticles as high-performance intercalation pseudocapacitive anode materials for lithium-ion capacitors. NPG Asia Mater. 10, 406–416 (2018). https://doi.org/10.1038/s41427-018-0042-5
P. Zhang, X. Zhao, Z. Liu, F. Wang, Y. Huang et al., Exposed high-energy facets in ultradispersed sub-10 nm SnO2 nanocrystals anchored on graphene for pseudocapacitive sodium storage and high-performance quasi-solid-state sodium-ion capacitors. NPG Asia Mater. 10, 429–440 (2018). https://doi.org/10.1038/s41427-018-0049-y
S. Miyoshi, T. Akbay, T. Kurihara, T. Fukuda, A.T. Staykov, S. Ida, T. Ishihara, Fast diffusivity of PF6− anions in graphitic carbon for a dual-carbon rechargeable battery with superior rate property. J. Phys. Chem. C 120, 22887–22894 (2016). https://doi.org/10.1021/acs.jpcc.6b07957
P. Ge, S. Li, L. Xu, K. Zou, X. Gao et al., Hierarchical hollow-microsphere metal-selenide@carbon composites with rational surface engineering for advanced sodium storage. Adv. Energy Mater. 9, 1803035 (2019). https://doi.org/10.1002/aenm.201803035
T. Thomberg, R. Väli, J. Eskusson, T. Romann, A. Jänes, Potassium salts based non-aqueous electrolytes for electrical double layer capacitors: a comparison with LiPF6 and NaPF6 cased electrolytes. J. Electrochem. Soc. 165, A3862–A3870 (2018). https://doi.org/10.1149/2.0661816jes
J.P. Perdew, K. Burke, M. Ernzerhof, Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996). https://doi.org/10.1103/PhysRevLett.77.3865
K. Tasaki, A. Goldberg, J.J. Liang, M. Winter, New insight into differences in cycling behaviors of a lithium-ion battery cell between the ethylene carbonate- and propylene carbonate-based electrolytes. ECS Trans. 33, 9–69 (2011). https://doi.org/10.1149/1.3563090
B. Delley, An all-electron numerical method for solving the local density functional for polyatomic molecules. J. Chem. Phys. 92, 508–517 (1990). https://doi.org/10.1063/1.458452
A. Karatrantos, Q. Cai, Effects of pore size and surface charge on Na ion storage in carbon nanopores. Phys. Chem. Chem. Phys. 18, 30761–30769 (2016). https://doi.org/10.1039/C6CP04611H
B. Yang, J. Chen, S. Lei, R. Guo, H. Li, S. Shi, X. Yan, Spontaneous growth of 3D framework carbon from sodium citrate for high energy- and power-density and long-life sodium-ion hybrid capacitors. Adv. Energy Mater. 8, 1702409 (2018). https://doi.org/10.1002/aenm.201702409
J. Ding, H. Wang, Z. Li, K. Cui, D. Karpuzov, X. Tan, A. Kohandehghan, D. Mitlin, Peanut shell hybrid sodium ion capacitor with extreme energy-power rivals lithium ion capacitors. Energy Environ. Sci. 8, 941–955 (2015). https://doi.org/10.1039/C4EE02986K
S. Li, J. Chen, X. Gong, J. Wang, P.S. Lee, A nonpresodiate sodium-ion capacitor with high performance. Small 14, 1804035 (2018). https://doi.org/10.1002/smll.201804035
X. Zhang, C. Lu, H. Peng, X. Wang, Y. Zhang, Z. Wang, Y. Zhong, G. Wang, Influence of sintering temperature and graphene additives on the electrochemical performance of porous Li4Ti5O12 anode for lithium ion capacitor. Electrochim. Acta 246, 1237–1247 (2017). https://doi.org/10.1016/j.electacta.2017.07.014
L.F. Que, F.D. Yu, Z.B. Wang, D.M. Gu, Pseudocapacitance of TiO2-x/CNT anodes for high-performance quasi-solid-state Li-Ion and Na-Ion capacitors. Small 14, 1704508 (2018). https://doi.org/10.1002/smll.201704508
E. Lim, C. Jo, H. Kim, M.H. Kim, Y. Mun et al., Facile synthesis of Nb2O5@carbon core-shell nanocrystals with controlled crystalline structure for high-power anodes in hybrid supercapacitors. ACS Nano 9, 7497–7505 (2015). https://doi.org/10.1021/acsnano.5b02601
Y.K. Wang, W.B. Zhang, Y. Zhao, K. Li, L.B. Kong, Coprecipitation reaction system synthesis and lithium-ion capacitor energy storage application of the porous structural bimetallic sulfide CoMoS4 nanoparticles. ACS Omega 3, 8803–8812 (2018). https://doi.org/10.1021/acsomega.8b01408
H.J. Zhang, Y.K. Wang, L.B. Kong, A facile strategy for the synthesis of three-dimensional heterostructure self-assembled MoSe2 nanosheets and their application as an anode for high-energy lithium-ion hybrid capacitors. Nanoscale 11, 7263–7276 (2019). https://doi.org/10.1039/C9NR00164F
R. Shi, C. Han, H. Li, L. Xu, T. Zhang et al., NaCl-templated synthesis of hierarchical porous carbon with extremely large specific surface area and improved graphitization degree for high energy density lithium ion capacitors. J. Mater. Chem. A 6, 17057–17066 (2018). https://doi.org/10.1039/C8TA05853A
C. Han, J. Tong, X. Tang, D. Zhou, H. Duan, B. Li, G. Wang, Boost anion storage capacity using conductive polymer as a pseudocapacitive cathode for high-energy and flexible lithium ion capacitors. ACS Appl. Mater. Interfaces. 12, 10479–10489 (2020). https://doi.org/10.1021/acsami.9b22081
Acknowledgements
This work was financially supported by National Key Research and Development Program of China (2018YFC1901605), the National Postdoctoral Program for Innovative Talents (BX201600192), Hunan Provincial Science and Technology Plan (2017TP1001) and Innovation Mover Program of Central South University (GCX20190893Y).
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Zou, K., Cai, P., Wang, B. et al. Insights into Enhanced Capacitive Behavior of Carbon Cathode for Lithium Ion Capacitors: The Coupling of Pore Size and Graphitization Engineering. Nano-Micro Lett. 12, 121 (2020). https://doi.org/10.1007/s40820-020-00458-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40820-020-00458-6