Abstract
Doxorubicin-loaded micelles were prepared from a copolymer comprising cholic acid (CA) and polyethyleneimine (PEI) for the delivery of antitumor drugs. The CA-PEI copolymer was synthesized via pairing mediated by N,N’-dicyclohexylcarbodiimide and N-hydroxysuccinimide using dichloromethane as a solvent. Fourier transform infrared and nuclear magnetic resonance analyses were performed to verify the formation of an amide linkage between CA and PEI and doxorubicin localization into the copolymer. Dynamic light scattering and transmission electron microscopy studies revealed that the copolymer could self-assemble into micelles with a spherical morphology and an average diameter of <200 nm. The CA-PEI copolymer was also characterized by X-ray diffraction and differential scanning calorimetry. Doxorubicin-loaded micelles were prepared by dialysis method. A drug release study showed reduced drug release with escalating drug content. In a cytotoxicity assay using human colorectal adenocarcinoma (DLD-1) cells, the doxorubicin-loaded CA-PEI micelles exhibited better antitumor activity than that shown by doxorubicin. This is the first study on CA-PEI micelles as doxorubicin carriers, and this study demonstrated that they are promising candidates as carriers for sustained targeted antitumor drug delivery system.
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Background
Several therapeutic anticancer drugs, although pharmacologically effective in cancer treatment, are restricted in their clinical applications because of their severe toxicity[1]. The severe toxicity is usually due to the lipid solubility of most of the anticancer drugs (>70%) and the therapeutic doses that are often very high[2]. Doxorubicin is one of the most successful drugs for targeting a broad range of cancers. Nevertheless, its clinical use is hindered by its side effects, which include cardiotoxicity and acquired drug resistance. To overcome these complications, researchers have placed an emphasis on developing nanoscale anticancer drug carriers for improving therapeutic efficacy in addition to reducing unwanted side effects[3].
Polymeric micelles self-assembled from amphiphilic copolymers have gained much interest for use in targeted anticancer drug delivery since they have a number of physico- and bio-chemical advantages over other types of nanocarriers. Polymeric micelles are virus-sized with a core-shell structure having a hydrophobic core and a hydrophilic shell and, more significantly, inherent stealth. Polymeric micelles seem ideal for the targeted and controlled delivery of hydrophobic anticancer drugs, including paclitaxel and doxorubicin[4], in that they significantly increase their water solubility, extend their circulation time, passively target tumor tissues[5], increase their bioavailability, have tremendous biocompatibility, and are degradable in vivo into nontoxic products. Several types of polymer blocks can be used to form micelles, of which the most studied include poly(α-hydroxy esters)[6] (such as polylactide[7], polyglycolide[8], and poly(ε-caprolactone)[9]), polyether[10], hydrotrophic polymers[11], and poly(amino acids)[12]. Several attempts have been made to formulate stable polymeric micelles with new surfactant combinations to achieve ideal drug delivery in vitro as well as in vivo.
Cholic acid (CA), a bile acid, is an amphiphilic steroid molecule naturally synthesized from cholesterol, which organizes into micelles above the critical micelle concentration (CMC). Bile acids, together with the phospholipids, vary the permeability of cell membranes[13]. Some bile acids form hydrogen-bonded aggregates with some drugs, which may lead to alterations in drug bioavailability[14]. Polyethyleneimine (PEI) is a cationic synthetic vector mainly used for gene delivery owing to its high nucleic acid condensing potential, ability to escape endosomes[15], nuclear localization capability[16], and promising transfection efficacy both in vitro and in vivo[15].
We synthesized doxorubicin-loaded cholic acid-polyethyleneimine (CA-PEI) micelles as an antitumor drug delivery system. The antitumor activity of the doxorubicin-loaded CA-PEI micelles was then tested using human colorectal adenocarcinoma (DLD-1) cells.
Methods
Materials
CA, PEI (average molecular weight (MW) approximately 1,300), N,N’-dicyclohexylcarbodiimide (DCC), N-hydroxysuccinimide (NHS), hydrochloric acid (HCl), triethylamine, tetrahydrofuran, and dichloromethane were purchased from Sigma-Aldrich (St. Louis, MO, USA). Doxorubicin was purchased from Calbiochem (Merck KGaA, Darmstadt, Germany). The Spectra/Por™ dialysis membrane (MW cutoff (MWCO) = 1,000 g/mol) was purchased from Spectrum Labs (Rancho Dominguez, CA, USA).
Synthesis of the CA-PEI copolymer
The side-chain carboxyl group at the C-24 position in CA was conjugated to the terminal amine group of PEI. This was carried out by dissolving CA in tetrahydrofuran and activating it with DCC and NHS at 25°C for 8 h. CA was then precipitated in ice-cold n-hexane and dried in an oven at 40°C for 2 h. The activated CA was then conjugated to the primary amine group of PEI by incubating for 15 h in dichloromethane (Figure1) using CA-PEI molar ratios of 1:1, 1:2, 1:4, 3:1, and 4:1.
The resulting conjugates were dried using a rotary evaporator and dissolved in dilute HCl followed by precipitation with cold acetone. Finally, they were dissolved in deionized water, filtered, and freeze-dried.
Analysis of the conjugates
To assess their functional groups, drug-loaded and blank conjugates were characterized using a Fourier trans-form infrared (FTIR) spectrophotometer (Spectrum 100, PerkinElmer, Waltham, MA, USA) using the potassium bromide (KBr) disc method. For each sample, 16 scans were obtained at a resolution of 4 cm−1 in the range of 4,000 to 700 cm−1. Further characterization of the conjugates was also performed using nuclear magnetic resonance (NMR) spectroscopy (Bruker Avance III, FT-NMR 600 MHz with cryoprobe, Germany). The CMCs of the micelles were determined using the dynamic light scattering method (Zetasizer Nano ZS, Malvern Instruments, Malvern, Worcestershire, UK) at 37°C with a scattering angle of 90°. The alterations in light intensity were recorded, and a graph was plotted for the molar concentrations of the samples versus the mean intensity. A sharp increase in the intensity signified the formation of micelles. Samples for morphological investigations were prepared by air-drying a drop of the micellar suspension on a carbon-coated formvar film on a 400-mesh copper grid. The morphology of the micelles was then visualized by transmission electron microscopy (TEM; Tecnai™ Spirit, FEI, Eindhoven, The Netherlands) at 220 kV and under various magnifications. The conjugates were observed under a light microscope (FluoView FV1000, Olympus, Tokyo, Japan). The X-ray diffraction (XRD) patterns of the CA-PEI conjugates were analyzed with an X-ray diffractometer (D8 ADVANCE, Cu Kα = 1.54184 Å, Bruker, WI, USA). The thermal behavior of the conjugates was investigated by differential scanning calo-rimetry (DSC) (Diamond DSC, PerkinElmer, Waltham, MA, USA).
Preparation of the doxorubicin-loaded CA-PEI micelles
Doxorubicin hydrochloride (2.5 mg) was dissolved in 2 mL chloroform and mixed with 2 μL of triethylamine. CA-PEI copolymers of different molar ratios (1:1, 1:2, 1:4, 3:1, and 4:1) were dissolved in 2 mL methanol. The doxorubicin and CA-PEI copolymer solutions were mixed in a glass vial and kept in the dark for 24 h. The solution was then poured drop by drop into deionized water (20 mL) under ultrasonic agitation using a sonifier (Branson Ultrasonics Co., Danbury, CT, USA) at a power level of 3 for 10 min. The organic solvents namely chloroform and methanol were then completely removed by vacuum distillation using a rotary evaporator. The doxorubicin-loaded micelle solution was then dialyzed against 1 L of deionized water for 24 h at 20°C using a cellulose membrane bag (MWCO = 1,000) to remove unloaded doxorubicin. The deionized water was substituted every 2 h for the first 12 h and then every 6 h. Immediately after this, the product was freeze-dried. The extent of doxorubicin loaded into the micelles was determined from a calibration curve of pure doxorubicin. Freeze-dried doxorubicin-loaded micelles were dissolved in 4 mL of a DMSO and methanol mixture (1:1), and the absorbance was measured at 480 nm using a UV-1601 spectrophotometer (Shimadzu Corp., Kyoto, Japan).
The drug loading content (DLC) is defined as the ratio of mass of the drug encapsulated within the micelles to the total mass of drug-loaded micelles, while the entrapment efficiency (EE) is the ratio of mass of drug loaded into the micelles to the mass of drug initially added. The DLC and EE were calculated according to the following equations:
In vitro drug release study
The drug release experiment was carried out in vitro. A doxorubicin-loaded micelle solution previously prepared by dialysis was used for release analysis. This solution was introduced into the dialysis membrane. Subsequently, the dialysis membrane was placed in a 200-mL beaker with 100 mL of phosphate-buffered saline (PBS). This beaker was placed on a magnetic stirrer with a stirring speed of 100 rpm at 37°C. At suitable intervals, 3 mL samples were taken from the release medium and an equivalent volume of fresh medium was added. The concentration of doxorubicin in each sample was measured by ultraviolet–visible spectrophotometry at 480 nm.
Cytotoxicity analysis
Human colorectal adenocarcinoma (DLD-1) and Chinese hamster lung fibroblast (V79) cell lines were obtained from the American Type Culture Collection (Manassas, VA, USA). DLD-1 cells were cultured and maintained in Roswell Park Memorial Institute-1640 (RPMI-1640) medium, whereas V79 cells were cultured in Dulbecco’s modified Eagle’s medium (DMEM). Both cell lines were supplemented with 10% FBS and 1% penicillin-streptomycin and maintained at 37°C in a humidified 5% CO2/95% air atmosphere.
The impact of the blank micelles on cell viability was assessed using V79 cells. Cultured cells maintained in DMEM were seeded in 96-well culture plates at 4 × 104 cells per well and incubated for 24 h. The cells were then treated with increasing concentrations of blank micelles ranging from 31.25 to 500 μg · mL−1 and incubated for an additional 24 h at 37°C in a 5% CO2/95% air atmosphere. Next, 20 μL of Alamar Blue® (Invitrogen, Carlsbad, CA, USA) was introduced to every well, and the cells were incubated for a further 4 h. The absorbance of each sample was measured at 570 nm with a microplate reader (Varioskan Flash, Thermo Scientific, Waltham, MA, USA). Cell viability was determined using the following equation:
The cytotoxicity of the doxorubicin-loaded micelles was determined using the Alamar blue assay. DLD-1 cells were seeded in 96-well culture plates at 2 × 104 cells per well and incubated for 48 h at 37°C in 5% CO2/95% air atmosphere. After the medium was removed, the cells were treated with 200 μL of 50, 25, 12.5, 6.25, 1.56, 0.19, and 0.09 μg · mL−1 of free doxorubicin and doxorubicin-loaded micelles, respectively. After 24-h incubation, Alamar blue solution was added to each well, and the incubation was continued for 4 h. The absorbance of each sample at 570 nm (A570) was measured with a microplate reader. Cell viability was determined using the following equation:
Results and discussion
Formation and characterization of the CA-PEI micelles
The facially amphipathic CA was introduced into PEI to prepare stable CA-PEI micelles as carriers for the delivery of doxorubicin. The CA terminal carboxyl group that was principally activated using DCC/NHS chemistry was conjugated to the PEI amine group via an amide linkage to obtain the CA-PEI conjugate (Figure1).
The FTIR spectra of the conjugates were somewhat consistent between the molar ratios tested (1:1, 1:2, 1:4, 3:1, and 4:1) (Figure2a). In the CA-PEI spectra, peaks for the N-H bending, C = O absorbance band, and C-H and N-H stretching were observed at 1,590, 1,630, 2,850 to 2,930, and 3,300 cm−1, respectively. The overlapping of the C = O absorbance band (1,630 cm−1) with the N-H bending band (1,590 cm−1) appeared as a doublet in the CA-PEI spectra. This indicated the formation of an amide linkage between CA and PEI[17]. The spectra of the doxorubicin-loaded micelles indicated the absence of the characteristic peaks for doxorubicin, showing that the drug was contained within the hydrophobic micelle core[18].
The freeze-drying process produced white crystalline CA-PEI conjugates where their morphology was observed under the light microscope as shown in Figure2b. The synthesized conjugates appeared as slender, needle-shaped small units. Each unit could be distinguished separately, and the length of the units varied slightly.
In the hydrogen nuclear magnetic resonance (1HNMR) spectra (Figure3), proton shifts were observed in the region of 1 to 2 ppm, which are the characteristic peaks of CA. These are the doublet, triplet, and multiplet peaks indicating the structure of CA. Integration values in the region of 1 to 2 ppm designate the number of protons in CA. Proton shifts from 2.6 to 3.52 ppm indicated the presence of PEI. At 4.5 ppm, there was a proton shift of the solvent.
The CMCs of a series of CA-PEI solutions of different molar ratios are shown in Figure4. Changes in the light intensity are symbolized as a function of the molar concentration, in which an abrupt increase designates the formation of stable micelles. The results showed that the micelles at 3:1 ratio had a lower CMC than those at other ratios. Given that CA has a hydrophobic steroidal nucleus, an increase in CA units could add to the hydrophobic interactions between the polymer chains in the micelle core and stabilize the structure. This is significant for the drug solubilization and EE of micelles[19, 20]. However, the CA-PEI micelles were ideally stable merely up to a definite concentration of CA (3:1). When the molar fraction of CA was raised further, it also increased the hydrophilic segments, which raised the likelihood of interaction between the hydrophilic and hydrophobic segments and a decreased hydrophobicity of the core, consequently leading to an increased CMC.
High CMCs are a key problem linked to micelle formulations given intravenously or diluted in blood. Low CMCs of CA-PEI micelles would thus offer some benefits, such as stability against dissociation and precipitation in blood due to dilution. In addition, embolism caused by the elevated amount of polymers used for the micelle formation could be avoided[21].
TEM micrographs of the CA-PEI micelles are shown in Figure5. The micelles were observed to have a spherical shape and were uniform in size ranging from 150 to 200 nm. The bright areas perhaps encompassed the hydrophobic part forming the micellar core, whereas the hydrophilic corona appeared to be darker because this region has a higher electron density than the core[22].
The formation of small, lustrous CA-PEI conjugates (1 to 2 mm) was an interesting finding; hence, they were subjected to XRD analysis (Figure6). For CA alone, characteristic peaks were observed at 2θ = 12.0°, 13.1°, and 19.8°[23]. In contrast, the XRD patterns of the CA-PEI conjugates showed characteristic body-centered lattice peaks at 2θ = 7.6°, 15°, and 23.2°. The intensity of the peak at 2θ = 7.6° was maximum for all CA-PEI conjugates. The sharp, intense, and broad peaks of the CA-PEI conjugates indicated a crystalline nature of the conjugate.
The conjugates were then subjected to DSC analysis (Figure7). When heated from 30°C to 250°C at 20°C/min, the CA crystals exhibited endothermic peaks due to fusion at 202°C[24], while a broad endothermic peak of a relatively lesser intensity was observed for PEI at 220°C. The DSC curve of the CA-PEI conjugate had two fusion peaks derived from CA and PEI at 220°C and 235°C, indicating the formation of conjugates. The intensity of the first peak was slightly higher than that of the second peak.
DLC and EE of micelles as calculated using Equations 1 and 2 are represented in Table1. The in vitro release profile of the doxorubicin-loaded micelles in PBS solution (pH 7.4) was obtained, which is summarized in Figure8. The drug release decreased as the drug content increased in the micelles. Micelles with a molar ratio (CA-PEI) of 1:4 had the maximum doxorubicin release after 6 days. The micelles exhibited a sustained release pattern of doxorubicin, which was characterized by an initial burst release followed by a slow and continuous drug release. In fact, this is a frequent observation for doxorubicin release reported by a number of researchers[25–29]. Doxorubicin is recognized to form a dimer in aqueous media due to the chemical reaction between the 30-NH2 group and the C9 α-ketol side chain. Given that the doxorubicin dimer is almost water insoluble and that its azomethine bond may readily be cleaved to restore the doxorubicin monomer, the later stage of sustained drug release may involve regenerated doxorubicin in addition to the doxorubicin dimer itself[30].
In vitro cell cytotoxicity
As shown in Figure9, the percent inhibition of cancer cells by the doxorubicin-loaded micelles improved from the 1:4 to the 4:1 combinations. Incorporation of doxorubicin into the CA-PEI micelles increased its cytotoxicity toward cancer cells. The half-maximal inhibitory concentration (IC50) values for the doxorubicin-loaded micelles were lower than those for free doxorubicin. The lower percentage inhibition and superior IC50 of doxorubicin compared with those of the doxorubicin-loaded micelles may well be accredited to the formation of aggregates, which deter drug entry into the cells. In addition, doxorubicin could be removed from tumor sites by drug efflux pumps[31]. In contrast, the enhanced cytotoxicity of the doxorubicin-loaded micelles could be explained by the higher permeability and retention of micelles in tumor cells. In addition, increased penetration of the doxorubicin-loaded micelles makes it possible for the drug to be delivered to the site of action, which is located in the nucleus, and therefore gives more time for doxorubicin to interact with its substrate. The increased cytotoxicity observed toward cancer cells could be linked to an increased production of reactive oxygen species and enhanced apoptosis. The ability of CA to modulate the number of aberrant crypt foci by restraining their development and growth and by eliminating a selected population may also contribute to the cytotoxicity of the doxorubicin-loaded micelles[32]. Both free doxorubicin and entrapped doxorubicin caused cell death in a dose-dependent manner. The cytotoxicity of doxorubicin is likely to increase further in vivo due to the enhanced permeation and retention effects of the loaded micelles. These findings imply that the selective uptake of micelles by cancer cells could reduce the toxicity and adverse effects of doxorubicin. To verify the low toxicity of blank micelles to normal cells, cell viability was determined in V79 cells (Figure10). The blank micelles were not toxic to V79 cells in the tested concentration ranges.
Conclusions
Here, we report the synthesis of doxorubicin-loaded novel CA-PEI micelles for the first time. The conjugates readily formed micelles, which exhibited a uniform spherical morphology as observed by TEM. XRD analysis revealed that the conjugates had a crystalline structure. Increasing the quantity of incorporated doxorubicin decreased the release rate of the drug. Doxorubicin-loaded CA-PEI micelles had an enhanced antitumor activity against tumor cells in vitro compared with that of doxorubicin itself. In contrast, when blank micelles were exposed to normal (V79) cells, they did not exhibit considerable toxicity. Together, these results indicate the potential of doxorubicin-loaded CA-PEI micelles as carriers for targeted antitumor drug delivery system.
Abbreviations
- CA:
-
Cholic acid
- CMC:
-
Critical micelle concentration
- DCC:
-
Dicyclohexylcarbodiimide
- DLC:
-
Drug loading content
- DMEM:
-
Dulbecco’s modified Eagle’s medium
- DSC:
-
Differential scanning calorimetry
- EE:
-
Entrapment efficiency
- FTIR:
-
Fourier transform infrared
- HNMR:
-
Hydrogen nuclear magnetic resonance
- MW:
-
Molecular weight
- MWCO:
-
Molecular weight cutoff
- NHS:
-
N-hydroxysuccinimide
- PBS:
-
Phosphate-buffered saline
- PEI:
-
Polyethyleneimine
- TEM:
-
Transmission electron microscopy
- XRD:
-
X-ray diffraction.
References
Ko J, Park K, Kim YS, Kim MS, Han JK, Kim K, Park RW, Kim IS, Song HK, Lee DS, Kwon IC: Tumoral acidic extracellular pH targeting of pH-responsive MPEG-poly(b-amino ester) block copolymer micelles for cancer therapy. J Control Release 2007, 123: 109–115. 10.1016/j.jconrel.2007.07.012
Bagul M, Kakumanu S, Wilson T, Nicolosi R: In vitro evaluation of antiproliferative effects of self-assembling nanoemulsion of paclitaxel on various cancer cell lines. Nano Biomed Eng 2010, 2: 100–108.
Hua MY, Yang HW, Liu HL, Tsai RY, Pang ST, Chuang KL, Chang YS, Hwang TL, Chang YH, Chuang HC, Chuang CK: Superhigh-magnetization nanocarrier as a doxorubicin delivery platform for magnetic targeting therapy. Biomaterials 2011, 32: 8999–9010. 10.1016/j.biomaterials.2011.08.014
Bae Y, Kataoka K: Intelligent polymeric micelles from functional poly(ethylene glycol)-poly(amino acid) block copolymers. Adv Drug Deliv Rev 2009, 61: 768–784. 10.1016/j.addr.2009.04.016
Torchilin VP: Tumor delivery of macromolecular drugs based on the EPR effect. Adv Drug Deliv Rev 2011, 63: 131–135. 10.1016/j.addr.2010.03.011
Gaucher G, Marchessault RH, Leroux JC: Polyester-based micelles and nanoparticles for the parenteral delivery of taxanes. J Control Release 2010, 143: 2–12. 10.1016/j.jconrel.2009.11.012
Yoo HS, Park TG: Folate receptor targeted biodegradable polymeric doxorubicin micelles. J Control Release 2004, 96: 273–283. 10.1016/j.jconrel.2004.02.003
Zhan C, Gu B, Xie C, Li J, Liu Y, Lu W: Cyclic RGD conjugated poly(ethylene glycol)-co-poly(lactic acid) micelle enhances paclitaxel anti-glioblastoma effect. J Control Release 2010, 143: 136–142. 10.1016/j.jconrel.2009.12.020
Shuai X, Ai H, Nasongkla N, Kim S, Gao J: Micellar carriers based on block copolymers of poly(ε-caprolactone) and poly(ethylene glycol) for doxorubicin delivery. J Control Release 2004, 98: 415–426. 10.1016/j.jconrel.2004.06.003
Batrakova EV, Kabanov AV: Pluronic block copolymers: evolution of drug delivery concept from inert nanocarriers to biological response modifiers. J Control Release 2008, 130: 98–106. 10.1016/j.jconrel.2008.04.013
Huh KM, Min HS, Lee SC, Lee HJ, Kim S, Park K: A new hydrotropic block copolymer micelle system for aqueous solubilization of paclitaxel. J Control Release 2008, 126: 122–129. 10.1016/j.jconrel.2007.11.008
Bae Y Y, Kataoka K K: Intelligent polymeric micelles from functional poly(ethyleneglycol)-poly(amino acid) block copolymers. Adv Drug Deliv Rev 2009, 61: 768–784. 10.1016/j.addr.2009.04.016
Bowe CL, Mokhtarzadeh L, Venkatesen P, Babu S, Axelrod HR, Sofia MJ, Kakarla R, Chan TY, Kim JS, Lee HJ, Amidon GL, Choe SY, Walker S, Kahne D: Design of compounds that increase the absorption of polar molecules. Proc Natl Acad Sci USA 1997, 94: 12218–12223. 10.1073/pnas.94.22.12218
Posa M, Guzsvany V, Csanadi J, Kevresan S, Kuhajda K: Formation of hydrogen-bonded complexes between bile acids and lidocaine in the lidocaine transfer from an aqueous phase to chloroform. Eur J Pharm Sci 2008, 34: 281–292. 10.1016/j.ejps.2008.04.011
Boussif O, Lezoualc’h F, Zanta MA, Mergny MD, Scherman D, Demeneix B, Behr JP: A versatile vector for gene and oligonucleotide transfer into cells in culture and in vivo: polyethylenimine. Proc Natl Acad Sci USA 1995, 92: 7297–7301. 10.1073/pnas.92.16.7297
Brunner S, Furtbauer E, Sauer T, Kursa M, Wagner E: Overcoming the nuclear barrier: cell cycle independent nonviral gene transfer with linear polyethylenimine or electroporation. Mol Ther 2002, 5: 80–86. 10.1006/mthe.2001.0509
Pavia DL, Lampman GM, Kriz GS: Infrared Spectroscopy: Survey of the Important Functional Groups with Examples. Introduction to Spectroscopy. 2nd edition. Saunders, Philadelphia; 1996:69.
Zhang W, Shi Y, Chen Y, Hao J, Sha X, Fang X: The potential of Pluronic polymeric micelles encapsulated with paclitaxel for the treatment of melanoma using subcutaneous and pulmonary metastatic mice models. Biomaterials 2011, 32: 5934–5944. 10.1016/j.biomaterials.2011.04.075
Letchford K, Helen B: A review of the formation and classification of amphiphilic block copolymer nanoparticulate structures: micelles, nanospheres, nanocapsules and polymersomes. Eur J Pharm Biopharm 2007, 65: 259–269. 10.1016/j.ejpb.2006.11.009
Gao ZG, Fain HD, Rapoport N: Controlled and targeted tumor chemotherapy by micellar-encapsulated drug and ultrasound. J Control Release 2005, 102: 203–222. 10.1016/j.jconrel.2004.09.021
Torchilin VP: PEG-based micelles as carriers of contrast agents for different imaging modalities. Adv Drug Deliver Rev 2002, 54: 235–252. 10.1016/S0169-409X(02)00019-4
Tan H, Zhang Y, Wang M, Zhang Z, Zhang X, Yong AM, Wong SY, Chang AY, Chen Z, Li X, Choolani M, Wang J: Silica-shell cross-linked micelles encapsulating fluorescent conjugated polymers for targeted cellular imaging. Biomaterials 2012, 33: 237–246. 10.1016/j.biomaterials.2011.09.037
Ito T, Byrn S, Chen X, Carvajal MT: Thermal insight of mechanically activated bile acid powders. Int J Pharm 2011, 420: 68–75. 10.1016/j.ijpharm.2011.08.022
Moribe K, Masaki M, Kinoshita R, Zhang J, Limwikrant W, Higashi K, Tozuka Y, Oguchi T, Yamamoto K: Guest molecular size-dependent inclusion complexation of parabens with cholic acid by cogrinding. Int J Pharm 2011, 420: 191–197. 10.1016/j.ijpharm.2011.08.027
Song H, Cao X, Ruan J, Peng X, Wang J, Wang C, Bao C: Application of rotatable central composite design in the preparation and optimization of poly(lactic-co-glycolic acid) nanoparticles for controlled delivery of HSA. Nano Biomed Eng 2011, 3: 34–41.
Kataoka K, Matsumoto T, Yokoyama M, Okano T, Sakurai Y, Fukushima S, Okamoto K, Kwon GS: Doxorubicin-loaded poly(ethylene glycol)–poly(b-benzyl-L-aspartate) copolymer micelles: their pharmaceutical characteristics and biological significance. J Control Release 2000, 64: 143–153. 10.1016/S0168-3659(99)00133-9
Chan Y, Wong T, Byrne F, Kavallaris M, Bulm V: Acid-labile core cross-linked micelles for pH-triggered release of antitumor drugs. Biomacromolecules 2008, 9: 1826–1836. 10.1021/bm800043n
Xiong XB, Mahmud A, Uludag H, Lavasanifar A: Multifunctional polymeric micelles for enhanced intracellular delivery of doxorubicin to metastatic cancer cell. Pharm Res 2008, 25: 2555–2566. 10.1007/s11095-008-9673-5
Li GY, Song S, Guo L, Ma SM: Self-assembly of thermo- and pH responsive poly(acrylic acid)-b-poly(N-isopropylacrylamide) micelles for drug delivery. J Polym Sci A Polym Chem 2008, 46: 5028–5035. 10.1002/pola.22831
Qiu LY, Yan MQ: Constructing doxorubicin-loaded polymeric micelles through amphiphilic graft polyphosphazenes containing ethyl tryptophan and PEG segments. Acta Biomater 2009, 5: 2132–2141. 10.1016/j.actbio.2009.02.005
Butt AM, Amin MCIM, Katas H, Sarisuta N, Witoonsaridsilp W, Benjakul R: In vitro characterization of Pluronic® F127 and D-α-Tocopherol polyethylene glycol 1000 succinate mixed micelles as nanocarriers for targeted anticancer-drug delivery. J Nanomater 2012, 2012: 11. 10.1155/2012/916573
Bird RP: Further investigation of the effect of cholic acid on the induction, growth characteristics and stability of aberrant crypt foci in rat colon. Cancer Lett 1995, 88: 201–209. 10.1016/0304-3835(94)03618-S
Acknowledgments
This project was funded by a Research University Grant (UKM-GUP-SK-07-23-045) from Universiti Kebangsaan Malaysia (UKM) and Science Fund (02-01-02-SF0738) from the Ministry of Science, Technology and Innovation, Malaysia.
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors’ contributions
MWA carried out the preparation, characterization, drug loading, and drug release studies of cholic acid-polyethyleneimine micelles. HK and AMB participated in the cell viability assays. MCIMA participated in the design of the study and coordination. MWA and AMB drafted the manuscript. All authors read and approved the final manuscript.
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Amjad, M.W., Amin, M.C.I.M., Katas, H. et al. Doxorubicin-loaded cholic acid-polyethyleneimine micelles for targeted delivery of antitumor drugs: synthesis, characterization, and evaluation of their in vitro cytotoxicity. Nanoscale Res Lett 7, 687 (2012). https://doi.org/10.1186/1556-276X-7-687
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/1556-276X-7-687