Abstract
Silver nanowire transparent electrodes have received much attention as a replacement for indium tin oxide, particularly in organic solar cells. In this paper, we show that when silver nanowire electrodes conduct current at levels encountered in organic solar cells, the electrodes can fail in as little as 2 days. Electrode failure is caused by Joule heating which causes the nanowires to breakup and thus create an electrical discontinuity in the nanowire film. More heat is created, and thus failure occurs sooner, in more resistive electrodes and at higher current densities. Suggestions to improve the stability of silver nanowire electrodes are given.
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Background
Transparent electrodes are a necessary component in a number of devices such as touch screens, liquid crystal displays, and organic light-emitting diodes. The most commonly used transparent conductor, indium tin oxide (ITO), is expensive, has limited mechanical flexibility, and requires high deposition temperatures. Recent advances in nanomaterials have generated alternatives to ITO. Of the various materials, films consisting of random networks of solution-synthesized silver nanowires have emerged as a leading candidate [1, 2]. Current conducts through the nanowires while light is able to pass through the open spaces between the nanowire networks. We have synthesized the nanowire films that have transparency and conductivity values better than competing new flexible technologies (e.g., carbon nanotube films, graphene, conductive polymers) and comparable to ITO. Furthermore, the nanowire electrodes are inexpensive, flexible, and compatible with roll-to-roll deposition techniques.
In addition, silver nanowire electrodes also scatter a portion of the transmitted light [3], making these electrodes particularly attractive for use in solar cells. Indeed, there are numerous reports about the promising device characteristics of organic solar cells using silver nanowire electrodes [4, 5]. Silver nanowires are known to oxidize and corrode over a period of months in air [6]; however, there are no studies on the stability of the nanowire electrodes during use (i.e., when they are conducting current). In contrast to ITO where current conducts throughout the entire area of the film, in nanowire electrodes, electronic transport occurs only through the metal wire pathways, and these nanowire pathways have diameters less than 100 nm. Because of this, although the current densities generated in organic solar cells are relatively low (on the order of 10 mA/cm2, with the best performing devices generating about 17 mA/cm2[7]), the resulting current densities in the nanowires are very high. For example, if we assume that half of the nanowires in 12 Ω/sq silver nanowire electrodes participate in current conduction, a solar cell current density of 17 mA/cm2 (i.e., total current divided by the total top surface area of the film) would result in an approximate current density in the nanowires of 4 × 104 A/cm2 (i.e., current flowing through a single nanowire divided by its cross-sectional area)a. For comparison, this same current flowing through a 250-nm thick ITO film results in a cross-sectional current density of 103 A/cm2, more than an order of magnitude less.
In this paper, it is shown that at current density levels incurred in organic solar cells, silver nanowire electrodes fail in a matter of days. We report how parameters such as sheet resistance and current density affect the time to failure, as well as characterize the electrodes to investigate the failure mechanism.
Methods
Silver nanowires dispersed in ethanol, with average diameters of 90 nm and average lengths of 25 μm, were purchased from Blue Nano Inc., Charlotte, North Carolina. The nanowire solution was diluted and then dispersed on 5 cm × 4.5 cm glass substrates using the Mayer rod coating method [3, 8, 9]. Films of varying nanowire densities were prepared. After deposition, the films were annealed at 200°C for 30 min to fuse the overlapping nanowire junctions, which greatly reduces the sheet resistance. The sheet resistance of the films was measured by either a 4-point probe measurement system or a multimeter. The transparencies were measured with a spectrometer with an integrating sphere, with a plain glass substrate used as the reference.
Strips of copper tape were applied on two ends of each electrode. To investigate the effects of current flow through the electrodes, a direct current (DC) power supply was used to pass a constant current across the electrodes. The current was conducted until the electrodes failed, which we define as the point when the DC power supply reached its maximum of 30 V and thus could no longer maintain the constant current. The voltage across the electrodes and the surface temperature were monitored continuously throughout the experiment using computer data collection. For the temperature measurement, a flat leaf-style thermocouple was used. The electrodes were soon afterwards imaged with a scanning electron microscope (SEM), for which a thin coating of gold on the sample was required to prevent electron charging. Transmission electron microscopy (TEM) samples were prepared by mechanically rubbing the electrodes onto copper grids overlayed with ultra-thin amorphous carbon. Both bright-field images and energy dispersive spectroscopy (EDS) spectra were obtained in the TEM.
For comparison purposes, additional nanowire electrodes were prepared, but no current was passed across them. Rather, one electrode was left in air and its sheet resistance was monitored over the period of 1 year. Other electrodes were annealed in an atmospheric furnace each at various temperatures and times. These electrodes were imaged in the SEM at various stages to see how the electrode morphology evolved throughout the annealing process.
Results and discussion
Electrode failure measurements
An SEM image of a prepared nanowire electrode is shown in Figure 1a. The transparency of all electrodes was nearly constant across all visible wavelengths, as similarly found by other groups [3, 10, 11]. The electrodes prepared for the stability experiments had sheet resistances ranging from 12 Ω/sq (with a corresponding transparency of 91% at a wavelength of 550 nm) to 37 Ω/sq (with a transparency of 94% at 550 nm). Figure 1b shows the evolution of the voltage and surface temperature of a 12 Ω/sq nanowire electrode as 17 mA/cm2 of current was passed across it. As was typical with all samples measured, the voltage (and therefore resistance) gradually increased with time, and then suddenly jumped to 30 V once the electrode failed. The power dissipated in the electrode is P = IV, so with a constant current and a gradually increasing voltage, the surface temperature gradually increased over time as well until electrode failure.
Figure 2a shows that under a constant current density, electrodes with a higher sheet resistance fail more quickly. Higher sheet resistance electrodes have sparser nanowire networks, and thus the current density in the individual nanowires is higher than in lower resistance electrodes. Joule heating is also higher in more resistive films, since P = IV = I2R. The surface temperatures immediately preceding the electrode failure of the four samples measured for Figure 2a, from the lowest to highest sheet resistance, were 55°C, 70°C, 100°C, and 102°C, respectively.
Figure 2b illustrates that for nanowire electrodes with the same sheet resistance, a higher current density results in a shorter lifetime. Higher current densities result in higher currents through the individual nanowires and more Joule heating. The temperatures of the electrode preceding failure for the three current densities applied in Figure 2b, from lowest to highest current density, were 50°C, 74°C, and 100°C, respectively.
In the comparison sample, where a nanowire electrode was left in air without current flow, the sheet resistance only increased by 10% after 3 months. After 1 year, however, the resistance was 6 orders of magnitude higher than its original value.
Failure mechanism characterization
Typical SEM images of the electrode after failure are shown in Figure 3. In contrast to the smooth nanowire sidewalls observed in the as-prepared films, nanoparticles were now present on the nanowire surfaces. In some locations on the sample, as in Figure 3b, the nanowires were broken up into discontinuous segments. Enough nanowires in the electrode were broken up such that there was no longer a continuous electrical pathway across the film.
Although silver is susceptible to electromigration at the current densities and temperatures encountered in these electrodes [12], the SEM images are not indicative of the voids and hillocks that are characteristic of electromigration [12–16]. Rather, our study suggests that it is the instability of nanowires at elevated temperatures which is the reason for the electrode failure. As mentioned in the experimental section, nanowire electrodes were annealed at various temperatures without current flow. Figure 4 shows SEM images of nanowire electrodes annealed for 17 days at 100°C and 150°C. Even at a temperature as low as 100°C, nanoparticles formed on the surfaces of the nanowires (Figure 4a), which increased in size and density with increasing annealing time. At 150°C, nanoparticles also formed, and the nanowires eventually broke up into discontinuous segments (Figure 4b).
As noted in the previous section, when current is passed through a nanowire electrode, the temperature is elevated due to Joule heating. The Joule heating of silver nanowire films has been discussed previously in the context of transparent film heaters, and it was observed that this heating in some cases led to the destruction of the film [17]. Although the surface temperature of the electrodes in our studies was around or below 100°C while conducting current, the temperature of the nanowires themselves are intuitively higher than the average surface temperature, particularly at the resistive junctions where two nanowires overlap. The annealing experiments showed that nanowire networks in air at modest temperatures are unstable; nanoparticles first form and then the nanowires eventually break up and become electrically discontinuous. Thus, in the case of current conduction, the temperature of the nanowires rises due to Joule heating, and the instability of the nanowires at these temperatures causes the electrodes to fail. The measured surface temperature of the 12 Ω/sq electrode under 17 mA/cm2 of current flow was 55°C at the time of failure. Comparing the time to failure of this electrode to the time for the nanowires in the annealed samples to break up, we estimate that the temperature of the nanowires themselves in this particular case was between 100°C and 150°C.
Elechiguerra et al. found that silver nanowires synthesized by the polyol method corrode in the atmosphere [6]. Rather than corroding by reacting with oxygen, silver corrodes due to reduced sulfur gases present in the air. They observed that after 3 weeks, silver sulfide (Ag2S) nanoparticles started to form on the surface of the nanowires, and after 6 months, some of the nanowires became discontinuous. In our experiments, nanoparticles and breakage occur much faster. Corrosion is greatly enhanced at elevated temperatures [18]. EDS spectra were taken from the nanoparticles decorating the surface of the nanowires after electrode failure (Figure 5). Other than the carbon and copper signals originating from the TEM grid, only silver and sulfur were detected. The ratio of silver to sulfur content was 9:1. The presence of sulfur indicates that the electrodes may have failed due to the corrosion of the nanowires in the atmosphere at the elevated temperatures caused by Joule heating.
Alternatively, or addition to corrosion, another reason for the breakup of the silver nanowires at increased temperatures could be attributed to the high surface energy of the nanowires. Nanowires have a large surface-area-to-volume ratio, and the sidewalls of the nanowires used in the electrodes are all {110} planes [19], which are not the lowest energy planes in an FCC material. At elevated temperatures, atomic diffusion is increased, and kinetic limitations to reconstruction can be overcome. Silver nanobelts and nanowires of other metals have been shown to fragment at temperatures far below their bulk melting temperatures due to Rayleigh instability [20, 21], and a similar phenomenon may be occurring here.
Our data indicate that the Joule heating effect elevates the temperature of silver nanowire electrodes, which leads to nanowire instability and ultimately electrode failure. More studies are required to determine whether the instability of silver nanowires at elevated temperatures in air is due to corrosion, Rayleigh instability, or another mechanism.
Relevance to nanowire electrode design
The experimental results indicate that steps must be taken to improve the longevity of nanowire electrodes under current flow before they are suitable for use in organic solar cells. In a flexible organic solar cell, the substrate underneath the transparent electrode is typically a plastic such as polyethylene terephthalate (PET) or polyethylene naphthalate (PEN), and organic materials are deposited on top of the electrode. PET and PEN are permeable to gas [22], as are many of the common small molecules and polymeric materials used in organic solar cells [23, 24], and so these materials will likely not prevent corrosion. Researchers are developing organic solar cell materials with low permeability to gas [25, 26]. Alternatively, encapsulation of the organic solar cell [22, 27] may prevent the corrosion of the silver nanowire electrode.
Another option is to passivate the silver nanowires. Ramasamy et al. encapsulated silver nanowires in TiO2[28]. The TiO2 shell suppressed the motion of silver atoms at the nanowire surface, thus increasing their thermal stability to 700°C. However, because of the low conductivity of TiO2, it is expected that the junction resistance between overlapping wires and thus the overall sheet resistance of a film of these wires would be increased significantly over bare silver nanowire films. Ahn et al. coated the surface of a silver nanowire film with graphene oxide, which is impermeable to gas molecules [29]. The coating reduced but did not completely prevent the increase of sheet resistance of silver nanowire electrodes when annealed at 70°C in high humidity over 1 week [29]. Most recently, Kim et al. sandwiched a silver nanowire electrode between two films of ZnO [30]. The composite was thermally stable up to 375°C. This ZnO passivation seems promising; however, the stability of the composite electrode at elevated temperatures for extended periods of time or its stability under sustained current flow was not reported. More study is required to develop and test a suitable silver nanowire electrode passivation.
Larger diameter nanowires would take longer to corrode and also have smaller surface-area-to-volume ratios and would thus be more stable at elevated temperatures. However, the use of larger diameter nanowires will result in less desirable optoelectronic properties (e.g., more haze, less uniformity, and potentially lower transparencies at a given sheet resistance) [31], and so there would be a trade-off between increased stability and decreased optoelectronic performance of the electrode. Another potentially helpful strategy would be to synthesize and deposit films of silver nanowires which have low energy {111} facets. Also, alternative metallic nanowires that are less susceptible to corrosion could be considered, such as cupronickel nanowires [32]. Our results also indicate the importance of keeping current densities low and using low resistance nanowire electrodes, which are unfortunately less transparent.
Conclusions
This paper shows that at current levels generated in organic solar cells, silver nanowire electrodes fail in an unacceptably short time. Electrodes with higher sheet resistances and electrodes subject to higher current densities fail more quickly. The reason for electrode failure is attributed to the instability of silver nanowires at elevated temperatures caused by Joule heating. Design factors such as passivation, electrode sheet resistance, and nanowire diameter need to be considered before silver nanowire electrodes will be useful as an ITO replacement in organic solar cells.
Endnotes
aThe current density in the nanowires was estimated by dividing the total current flowing across the electrode by the total cross-sectional area of all nanowires contacting the copper strip at one end of the sample and multiplying by two since we assumed only half of the nanowires were involved in conduction.
Abbreviations
- DC:
-
direct current
- EDS:
-
energy dispersive spectroscopy
- ITO:
-
indium tin oxide
- PEN:
-
polyethylene naphthalate
- PET:
-
polyethylene terephthalate
- SEM:
-
scanning electron microscope
- TEM:
-
transmission electron microscopy.
References
Hecht DS, Hu L, Irvin G: Emerging transparent electrodes based on thin films of carbon nanotubes, graphene, and metallic nanostructures. Adv Mater 2011, 23: 1482–1513. 10.1002/adma.201003188
Kumar A, Zhou C: The race to replace tin-doped indium oxide: which material will win? ACS Nano 2010, 4: 11–14. 10.1021/nn901903b
Hu L, Kim HS, Lee JY, Peumans P, Cui Y: Scalable coating and properties of transparent, flexible, silver nanowire electrodes. ACS Nano 2010, 4: 2955–2963. 10.1021/nn1005232
Hardin BE, Gaynor W, Ding I, Rim SB, Peumans P, McGehee MD: Laminating solution-processed silver nanowire mesh electrodes onto solid-state dye-sensitized solar cells. Org Electron 2011, 12: 875–879. 10.1016/j.orgel.2011.03.006
Yu Z, Li L, Zhang Q, Hu W, Pei Q: Silver nanowire-polymer composite electrodes for efficient polymer solar cells. Adv Mater 2011, 23: 4453–4457. 10.1002/adma.201101992
Elechiguerra JL, Larios-Lopez L, Liu C, Garcia-Gutierrez D, Camacho-Bragado A, Yacaman MJ: Corrosion at the nanoscale: the case of silver nanowires and nanoparticles. Chem Mater 2005, 17: 6042–6052. 10.1021/cm051532n
Green MA, Emery K, Hishikawa Y, Warta W, Dunlop ED: Solar cell efficiency tables (version 39). Prog Photovolt Res Appl 2012, 20: 12–20. 10.1002/pip.2163
Dan B, Irvin GC, Pasquali M: Continuous and scalable fabrication of transparent conducting carbon nanotube films. ACS Nano 2009, 3: 835–843. 10.1021/nn8008307
Liu CH, Yu X: Silver nanowire-based transparent, flexible, and conductive thin film. Nanoscale Res Lett 2011, 6: 1–8.
Zeng XY, Zhang QK, Yu RM, Lu CZ: A new transparent conductor: silver nanowire film buried at the surface of a transparent polymer. Adv Mater 2010, 22: 4484–4488. 10.1002/adma.201001811
Krantz J, Richter M, Spallek S, Spiecker E, Brabec CJ: Solution-processed metallic nanowire electrodes as indium tin oxide replacement for thin-film solar cells. Adv Funct Mater 2011, 21: 4784–4787. 10.1002/adfm.201100457
Patil HR, Huntington HB: Electromigration and associated void formation in silver. J Phys Chem Solids 1970, 31: 463–474. 10.1016/0022-3697(70)90086-7
Stahlmecke B, Heringdorf FJ M, Chelaru LI, Horn-von Hoegen M, Dumpich G, Roos KR: Electromigration in self-organized single-crystalline silver nanowires. Appl Phys Lett 2006, 88: 053122–053122. 10.1063/1.2172012
Huang Q, Lilley CM, Divan R: An in situ investigation of electromigration in Cu nanowires. Nanotechnology 2009, 20: 075706. 10.1088/0957-4484/20/7/075706
Kaspers MR, Bernhart AM, Zu Heringdorf FJM, Dumpich G, Möller R: Electromigration and potentiometry measurements of single-crystalline Ag nanowires under UHV conditions. J Phys-Condens Mat 2009, 21: 265601. 10.1088/0953-8984/21/26/265601
Liu X, Zhu J, Jin C, Peng LM, Tang D, Cheng H: In situ electrical measurements of polytypic silver nanowires. Nanotechnology 2008, 19: 085711. 10.1088/0957-4484/19/8/085711
Celle C, Mayousse C, Moreau E, Basti H, Carella A, Simonato J-P: Highly flexible transparent film heaters based on random networks of silver nanowires. Nano Res 2012, 5: 427–433. 10.1007/s12274-012-0225-2
Franey JP, Kammlott GW, Graedel TE: The corrosion of silver by atmospheric sulfurous gases. Corros Sci 1985, 25: 133–143. 10.1016/0010-938X(85)90104-0
Sun Y, Mayers B, Herricks T, Xia Y: Polyol synthesis of uniform silver nanowires: a plausible growth mechanism and the supporting evidence. Nano Lett 2003, 3: 955–960. 10.1021/nl034312m
Sun Y, Mayers B, Xia Y: Transformation of silver nanospheres into nanobelts and triangular nanoplates through a thermal process. Nano Lett 2003, 3: 675–679. 10.1021/nl034140t
Toimil Molares ME, Balogh AG, Cornelius TW, Neumann R, Trautmann C: Fragmentation of nanowires driven by Rayleigh instability. Appl Phys Lett 2004, 85: 5337. 10.1063/1.1826237
Dennler G, Lungenschmied C, Neugebauer H, Sariciftci NS, Latreche M, Czeremuszkin G, Wertheimer MR: A new encapsulation solution for flexible organic solar cells. Thin Solid Films 2006, 511: 349–353.
Chawdhury N, Köhler A, Harrison MG, Hwang DH, Holmes AB, Friend RH: The effects of H2O and O2 on the photocurrent spectra of MEH-PPV. Synthetic Met 1999, 102: 871–872. 10.1016/S0379-6779(98)00789-9
Kawano K, Pacios R, Poplavskyy D, Nelson J, Bradley DDC, Durrant JR: Degradation of organic solar cells due to air exposure. Sol Energ Mat Sol C 2006, 90: 3520–3530. 10.1016/j.solmat.2006.06.041
Voroshazi E, Verreet B, Aernouts T, Heremans P: Long-term operational lifetime and degradation analysis of P3HT: PCBM photovoltaic cells. Sol Energ Mat Sol C 2011, 95: 1303–1307. 10.1016/j.solmat.2010.09.007
Sun Y, Takacs CJ, Cowan SR, Seo JH, Gong X, Roy A, Heeger AJ: Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer. Adv Mater 2011, 23: 2226–2230. 10.1002/adma.201100038
Burrows PE, Bulovic V, Forrest SR, Sapochak LS, McCarty DM, Thompson ME: Reliability and degradation of organic light emitting devices. Appl Phys Lett 1994, 65: 2922–2924. 10.1063/1.112532
Ramasamy P, Seo D-M, Kim S-H, Kim J: Effects of TiO2 shells on optical and thermal properties of silver nanowires. J Mat Chem 2012, 22: 11651. 10.1039/c2jm00010e
Ahn Y, Jeong Y, Lee Y: Improved thermal oxidation stability of solution-processable silver nanowire transparent electrode by reduced graphene oxide. ACS Appl Mater Interfaces 2012, 4: 6410–6414. 10.1021/am301913w
Kim A, Won Y, Woo K, Kim C-H, Moon J: Highly transparent low resistance ZnO/Ag nanowire/ZnO composite electrode for thin film solar cells. ACS Nano 2013, 7: 1081–1091. 10.1021/nn305491x
Sorel S, Lyons PE, De S, Dickerson JC, Coleman JN: The dependence of the optoelectrical properties of silver nanowire networks on nanowire length and diameter. Nanotechnology 2012, 23: 185201. 10.1088/0957-4484/23/18/185201
Rathmell AR, Nguyen M, Chi M, Wiley BJ: Synthesis of oxidation-resistant cupronickel nanowires for transparent conducting nanowire networks. Nano Lett 2012, 12: 3193–3199. 10.1021/nl301168r
Acknowledgements
This work was supported by the Natural Science and Engineering Research Council (NSERC) of Canada.
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors’ contributions
HHK participated in the design of the study, carried out the experiments, and drafted the manuscript. IAG supervised the project, participated in the design of the study and analysis of its results, and revised the manuscript. Both authors read and approved the final manuscript.
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Khaligh, H.H., Goldthorpe, I.A. Failure of silver nanowire transparent electrodes under current flow. Nanoscale Res Lett 8, 235 (2013). https://doi.org/10.1186/1556-276X-8-235
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/1556-276X-8-235